Related
Hi,
I hope someone here can help me. The other night I was browsing the net at home (wi-fi connection) and after a while, if I'm not wrong, I've seen that the phone lost the phone/line connection, but I was not that worried: 1)I was in an area of my home where the cellphone line is not that good, 2) I was about to turn off the phone. The problem is that the next morning I turned it on and got "No service" and there was no way to get the operator line.
Tried the following things:
1) I didn't have the last version of MIUI so I updated it
2) Tried with an old release
3) Made a full wipe
4) Tried another kernel
5) Tried two different radios
6) Set a just rooted-Stock Rom
7) Tried an old august backup
8) Tried sim of different operators
All these things didn't produce any good result.
I also can tell you that the bars of the signal (close to the clock) are visible and the line is very good but if I try to select manually an operator I get "error" something like "now is impossible to connect to this operator, try later".
I really hope someone can help me and is not an hardware problem (but now I don't really now...)
Thank you and have a nice day!
sorry for my poor english that i did not read all post
but
first of all , get outta home , find somewhere outside because there has better single.
try flash a new radio.
go to MOBILE NETWORK SETTINGS ---> NERWORK OPERATORS
select "SELECT AUTOMATICALLY"
and ... sometimes MIUI does have single lost problem , if all of these don't work , try flash Stock ROM to determinate if its ROM problem , radio problem or , in the worse scenario , the hardware problem
Yes ok...thanks for the effort but is clear that you didn't read the post. I tried all of that and trying to select manually doesn't work.
Any radio version suggested?
Try the KB3 or the new kf1. Kd always gave me radio dumps couple of times a day with miui
Tried with KF1 no luck.
Any other suggestion?
Ok one update:
typing *#*#4636#*#*
I can see my operator, my IMEI but NOT my phone number.
My phone number doesn't show as well. Did u manage to get your phone to work again? If not, have u tried putting a different sim from the same or a different operator?
I tried almost everything...nothing works. Tried different sims, different operators...nothing.
What model do you have? And did you by mistake flash a wrong radio. A one that wasn't supposed to be for your phone ( I'm outta ideas)
Try
*#*#72786#*#*
Put msl
Select yes
U need to move the EFS files into root of SD.
Nv.log
Nv_data.bin
Nv_data.bin.md5
U must flash a compatible radio first then move them with root explorer
Reboot the phone and ull be fine
-Sent While Motor boating Your Mom =D
Hello,
I've noticed something strange this past month. I was getting data disconnections and I could'nt figure out why. Each time I look at my phone, turning the screen on, mobile network (voice + data) is missing for a few seconds, and comes back.
Now I know that if I keep the screen on for a while (I tried more thant 1 hour), I don't loose the network, but if let the screen go to sleep I immediately loose the network (I don't receive whatsapp messages in background), and when I turn the screen on, it comes back.
Weirdly, when my phone could reach 4G, I had (almost) no disconnection. It only happens in a 3G, edge, or nodata zone.
I changed my carrier (I just moved from europe to New Zealand), and it doen't change the problem.
I'm using CM11-Nightly (sept) on a I9505. I tried installing an old nightly(from july), and it was really full of error messages, so I switched back to a recent nightly, but in the meantime I had no disconnection.
Thank you for your help
noisy_sha said:
Hello,
I've noticed something strange this past month. I was getting data disconnections and I could'nt figure out why. Each time I look at my phone, turning the screen on, mobile network (voice + data) is missing for a few seconds, and comes back.
Now I know that if I keep the screen on for a while (I tried more thant 1 hour), I don't loose the network, but if let the screen go to sleep I immediately loose the network (I don't receive whatsapp messages in background), and when I turn the screen on, it comes back.
Weirdly, when my phone could reach 4G, I had (almost) no disconnection. It only happens in a 3G, edge, or nodata zone.
I changed my carrier (I just moved from europe to New Zealand), and it doen't change the problem.
I'm using CM11-Nightly (sept) on a I9505. I tried installing an old nightly(from july), and it was really full of error messages, so I switched back to a recent nightly, but in the meantime I had no disconnection.
Thank you for your help
Click to expand...
Click to collapse
I don't know exactly where this option is, but it's for battery saving. You can choose that somewhere in your settings I think
I think that's true for Wi-Fi, but I never found it for network.
And now it seems that network won't come back if I don't go to airplane mode and back to normal mode.
I'm having the same problem, seems to mostly affect lollipop installs.
Did you find a solution?
Penetal said:
I'm having the same problem, seems to mostly affect lollipop installs.
Did you find a solution?
Click to expand...
Click to collapse
No I didn't. It seems that somewhere in july 2014, CM11 included a new version of the modem. So every CM11 build after that and every CM12 build is affected (I don't know about other roms).
I read that it was the way the modem handled finding the best network method. With the previous modem (v5 ?) it tried to get LTE, 3G, etc... but now it fails when it fails to get the prefered network.
4 solutions:
- flash the modem (didn't try it, don't know how)
- You're supposed to be able to choose you're prefered network in the options and choose 2G/edge. Didn't work for me but I'm interested in your feedback.
- get an old version of CM11
- live with it (my current option :'( )
There is maybe another solution, I'm not an expert, just a desperate user.
Hey again, I did fix it for myself.
The modem is the problem (I flashed my modem, and my bootloader just to be re-up-to-date).
If you want to get lollipop for yourself you should do it, its not too hard
Its listed as Qustion 14 on this here page: http://forum.xda-developers.com/showthread.php?t=2419762
I don't mind trying to give some pointers if you need help understanding how to do it, but I did this at 5am while sick so my memory of what I did is not 100%, never the less I would like to help if you need it.
Thank you for the advice (you came seeking for one, and ended up helping me ).
How did you choose which modem version to pick up ? the latest ? Do you have to do it after every CM upgrade ?
Edit:
I found the latest version from one of your links : http://forum.xda-developers.com/showthread.php?p=50965837#post50965837
Is the "Combined package - both modems in one flashable file." ok ?
And what does flashing the bootloader do ?
"What it does"... I am not 100%, I assume it initialize some part of the system, HW or kernel level, but I might be way off.
In any case I did use the dual modem pack to flash both "PHONE" and "PDA", another thread I asked in just replied to another user with the neccessity to flash the new bootloader aswell (dont know if the version numbers applies for you):
u must be using a 4.4.2 baseband and bootloader .. just a 4.4.2 baseband will not work .. once updated ur set
Click to expand...
Click to collapse
My question is on this page a bit down, and some replies a bit further down than that:
http://forum.xda-developers.com/showthread.php?t=2735248&page=116
Tip: I had to save the PIT to a file (did it twice to be sure) with heimdall before using odin to flash (couldn't get heimdall to work for that part), all because odin would not play nice inbetween loading the PIT from device and flashing, this might not be a problem for you at all so it's just an FYI.
I managed to flash the modem & the bootloader. So far, no disconnection, so I'm quite happy.
Cheers
Hello,
I bought my Note 3 mobile and decided to flash C-Rom!
At the morning of one day I flashed the rom successfully. Later I installed all apps I wanted. I have my phone rebooted a lot of times with no problem. Some time at the afternoon of the same day I pick up the phone to stare at it! I activated the LTE option and deactivate it again. This was not the first time of doing it! After that the network signal was missing! I rebooted the phone, but it doesn't ask me for a PIN any more. I used my sim at another phone and it asked for a PIN. I used another SIM at my phone but it didn't ask for a PIN.
After dialing *#06# at Dialer a popup dialog shows up. The title of this dialog is MEID and the content is B0000000!
At settings>About phone>Status> the MEID is full of zeroes but the IMEI seems OK.
At the same screen i see the following:
Network - Searcing for Service
Mobile network type - Unknown
Mobile netwok state - Disconected
Service state - Out of service
My phone number - Unknown
MIN - Unknown
PRL version - Uknown
ICCID - Unknown
Thanks everyone in advance
Very strange.... without doing anything like flashing stock or modem?????
TheLiTTle said:
Hello,
I bought my Note 3 mobile and decided to flash C-Rom!
At the morning of one day I flashed the rom successfully. Later I installed all apps I wanted. I have my phone rebooted a lot of times with no problem. Some time at the afternoon of the same day I pick up the phone to stare at it! I activated the LTE option and deactivate it again. This was not the first time of doing it! After that the network signal was missing! I rebooted the phone, but it doesn't ask me for a PIN any more. I used my sim at another phone and it asked for a PIN. I used another SIM at my phone but it didn't ask for a PIN.
After dialing *#06# at Dialer a popup dialog shows up. The title of this dialog is MEID and the content is B0000000!
At settings>About phone>Status> the MEID is full of zeroes but the IMEI seems OK.
At the same screen i see the following:
Network - Searcing for Service
Mobile network type - Unknown
Mobile netwok state - Disconected
Service state - Out of service
My phone number - Unknown
MIN - Unknown
PRL version - Uknown
ICCID - Unknown
Thanks everyone in advance
Click to expand...
Click to collapse
The reason is unknown but it seems like your phone lost a valid IMEI/baseband.
Can you check the Baseband version?
Try to flash the stock firmware, or flash the baseband for your device.
The problem suddenly appeared and that's what makes me feel uncomfortable. The baseband number is N9005XXUENC2. I will try to flash whole firmware, but does anyone know how can I flash only the baseband? I don't want to stay with the original ROM!
TheLiTTle said:
The problem suddenly appeared and that's what makes me feel uncomfortable. The baseband number is N9005XXUENC2. I will try to flash whole firmware, but does anyone know how can I flash only the baseband? I don't want to stay with the original ROM!
Click to expand...
Click to collapse
Extract modem.bin and NON-HLOS.BIN files from the stock firmware, and flash via Odin.
Sent from my SM-N9005 using Tapatalk
It is my first Samsung. Could you be more specific? How can I extract those? Can you guide me through?
TheLiTTle said:
It is my first Samsung. Could you be more specific? How can I extract those? Can you guide me through?
Click to expand...
Click to collapse
Do you have the stock firmware file already?
Sent from my SM-N9005 using Tapatalk
Finally I was able to solve the problem. It is a problem with C-Rom and 4g option. I am going to write a new reply by tomorrow and also to the forum. I appreciate the help guys.
Thanks a lot
The problem is with the LTE activation/deactivation.
I am from Greece with COSMOTE provider. Here, in Greece, at the moment we have to pay an extra fee to the provider in order to have the option of using 4g. The steps as I believe are the following:
1). I am not paying this fee at the moment so I am not able to use 4g.
2). I activate 4g and immediately I deactivated it. I did not want to open it, just touching the selection at the notifications. This option is at the notifications when you slide down the notification bar using 2 fingers.
3). Then the signal goes off and I had to re-flash stock rom once again before flashing the custom rom. The problem has to do only with the signal and everything else works as charm in the C-ROM.
The C-ROM version which has this problem is this C-RoM-KK-v7.1-20140622-hlte.zip
Hi Guys,
I am writing this Thread believing that I will get a solution as Yota company has not provided any solution after 15 days trouble shooting. I just brought the phone from Russian seller through eBay.com to India and after 2 months of fight from the local customs office I just got my phone. I was very happy and was floating in air to have the first dual screen phone in my hand. The phone was flawless with dual screen was working awesome. The phone came with lollipop update. I switched on the phone with out inserting the simcard, the phone prompted for a small 350 MB update and I just update the phone. Then I just inserted the Simcard after which i started facing issue. The issue was the phone is able to read and shoe the service provider name but there was no network signal and it was showing only emergency calls. When i tried to make calls it showed network no registered. I tried with different simcard which resulted in the same issue. I though it might be a simcard issue and checked with my old phone but there was no simcard issue. So i just contacted the Yota tech team through mail to help me on this issue. They asked me do some basic troubleshooting but there was no use after 15 days they asked me to ship the phone to nearest service center which is in Russia. The issue is to and back from Russia customs will cost me the price of 2 Yotaphone fist generation phone price. So I through of resolving this issue myself and researched in online. I found that Samsung phones were also facing the same issue after update and tried all the solutions given in internet but there was no use. Finally there was a solution asking to root the phone and install the ariza patch which would solve the issue. I just rooted my phone and when I installed the ariza it showed it was not compilable for yotaphone 2. I just searched in XDA forums and could not find anyone reporting the similar issue with a solution. So I through of creating new thread in hope of getting a solution in this issue. Please help me in this issue by creating a patch or any solution which will me help me out of this. I am not able to use the phone as the basic call function is not even working reset the phone is a heaven.:crying::crying::crying:
bharath9962 said:
Hi Guys,
I am writing this Thread believing that I will get a solution as Yota company has not provided any solution after 15 days trouble shooting. I just brought the phone from Russian seller through eBay.com to India and after 2 months of fight from the local customs office I just got my phone. I was very happy and was floating in air to have the first dual screen phone in my hand. The phone was flawless with dual screen was working awesome. The phone came with lollipop update. I switched on the phone with out inserting the simcard, the phone prompted for a small 350 MB update and I just update the phone. Then I just inserted the Simcard after which i started facing issue. The issue was the phone is able to read and shoe the service provider name but there was no network signal and it was showing only emergency calls. When i tried to make calls it showed network no registered. I tried with different simcard which resulted in the same issue. I though it might be a simcard issue and checked with my old phone but there was no simcard issue. So i just contacted the Yota tech team through mail to help me on this issue. They asked me do some basic troubleshooting but there was no use after 15 days they asked me to ship the phone to nearest service center which is in Russia. The issue is to and back from Russia customs will cost me the price of 2 Yotaphone fist generation phone price. So I through of resolving this issue myself and researched in online. I found that Samsung phones were also facing the same issue after update and tried all the solutions given in internet but there was no use. Finally there was a solution asking to root the phone and install the ariza patch which would solve the issue. I just rooted my phone and when I installed the ariza it showed it was not compilable for yotaphone 2. I just searched in XDA forums and could not find anyone reporting the similar issue with a solution. So I through of creating new thread in hope of getting a solution in this issue. Please help me in this issue by creating a patch or any solution which will me help me out of this. I am not able to use the phone as the basic call function is not even working reset the phone is a heaven.:crying::crying::crying:
Click to expand...
Click to collapse
Do you still have this problem?
I wasn't sure at first, I thought it was my sim card, but I have tried 2 different networks sims and they both get no signal in my Yotaphone 2...
The network's name does appear, so the sim must be being read somewhat, but I always get no signal.
I literally have no idea what to do.
I too turned the phone on without a simcard, flashed the RU latest rom, flashed TWRP, rooted it etc, surely that has nothing to do with it...?
@bharath9962 ! I fixed it!
I have no idea why this happened, and I spent a few hours trying to fix it, very angry. I downgraded to 4.4 to see if it would help, put back the native China rom that came with my phone (accidentally deleted my backup too...)
I bought a new sim card just for this phone because the old one did not 'work'.
This is not a popular phone so it's hard to find information, anyway... I'm very relieved now. I can only imagine you gave up...
I found the answer here - thewichitacomputerguy.com/blog/how-i-fixed-your-sim-card-does-not-allow-connection-network-g1
1. Open the phone dialer
2. Enter: *#*#4636#*#* (Once entered, you will be taken directly to a "Testing" page) [4636 spells INFO]
3. Tap Phone Information
4. Scroll to the bottom of the screen and you should see a button that says radio off. Hit this button and when it reads radio on Hit it again to turn the radio back on. <-- (Not a Typo)
I rebooted and waited a few seconds, no signal. I turned on airplane mode, turned it off, and it worked!
Now I can go back to RU 1.99 and reinstall all my stuff...
cbcbcvcc said:
@bharath9962 ! I fixed it!
I have no idea why this happened, and I spent a few hours trying to fix it, very angry. I downgraded to 4.4 to see if it would help, put back the native China rom that came with my phone (accidentally deleted my backup too...)
I bought a new sim card just for this phone because the old one did not 'work'.
This is not a popular phone so it's hard to find information, anyway... I'm very relieved now. I can only imagine you gave up...
I found the answer here - thewichitacomputerguy.com/blog/how-i-fixed-your-sim-card-does-not-allow-connection-network-g1
1. Open the phone dialer
2. Enter: *#*#4636#*#* (Once entered, you will be taken directly to a "Testing" page) [4636 spells INFO]
3. Tap Phone Information
4. Scroll to the bottom of the screen and you should see a button that says radio off. Hit this button and when it reads radio on Hit it again to turn the radio back on. <-- (Not a Typo)
I rebooted and waited a few seconds, no signal. I turned on airplane mode, turned it off, and it worked!
Now I can go back to RU 1.99 and reinstall all my stuff...
Click to expand...
Click to collapse
@cbcbcvcc may i know which country you are and what type of sim your using. So that i could check my issue accordingly.. And thanks for your reply tp my post as i waa waiting for some one to help for the last 3 months... When hope was vanishing you just showed up.. This help means a lot to me
bharath9962 said:
@cbcbcvcc may i know which country you are and what type of sim your using. So that i could check my issue accordingly.. And thanks for your reply tp my post as i waa waiting for some one to help for the last 3 months... When hope was vanishing you just showed up.. This help means a lot to me
Click to expand...
Click to collapse
My country is in Asia but I believe this does not matter - the problem was that somehow the radio (cell phone function) was 'off'/glitched, and had to be turned on+off to make the phone function again. Using a different country's sim card would not fix this problem.
As I wrote above, we both share the fact that we first turned our phones on with no sim, and updated. Maybe just a coincidence...
Just try the guide and please let me know if it is fixed!
cbcbcvcc said:
My country is in Asia but I believe this does not matter - the problem was that somehow the radio (cell phone function) was 'off'/glitched, and had to be turned on+off to make the phone function again. Using a different country's sim card would not fix this problem.
As I wrote above, we both share the fact that we first turned our phones on with no sim, and updated. Maybe just a coincidence...
Just try the guide and please let me know if it is fixed!
Click to expand...
Click to collapse
Hi cbcbcvcc,
Tried the guide but still no use, I also downgraded the ROM and tried the guide still no use. This is hurting me so bad.. Do you have any other way to resolve the issue please share with me.
No SIM CARD
Hi to All,
suddenly after I did a reset and change the sim card, the Yotaphone is no more recognize the sim card.
I try to install a new rom...nothing
I try to install the Kitkat rom...nothing
I try the method suggested here to use the code *#*#46..... nothing
any help please
Please I have tried the guidelines but the radio refuse to ON. I click on it but not never respond
Hello, I have update my Yotaphone and now I receive WCDMA, but no gsm/edge signal .
I change the Rom (lollipop,kitkat,, HK rom, EU Rom)but I have always the problem :
I receive H, H+. But no Edge/GSM...
Can you help me.
[SOLVED]
Fix for Yotaphone 2 YD206 from China
If you already flashed the phone to latest EU 5.0, you can skip 1-5
1. download via FTP: fw.ydevices.com/YotaPhone2/YotaPhoneFlasher/yotaphone2_flasher.exe and install
2. run flasher and download latest EU rom (2 - 5- 7)
3. turn off the phone and turn it on while holding volume down - this will boot the phone in "downloading..." mode
4. in the flasher press 1 (Flash the cellphone)
5. the phone is now on 5.0.0-EU1.1.124b and 2G is not working at all and 3G is connecting only to 2100 MHz (on my cell network)
6. download via FTP: fw.ydevices.com/YotaPhone2/Firmwares/CN/4.4.3-S01-003-CN1.0.3.32a.zip
7. unzip the file and copy \radio to c:\program files (x86)\yotaphone_flasher
8. run cmd and go to c:\program files (x86)\yotaphone_flasher
9. repeat step 3.
10. run next lines:
fastboot flash modem radio\NON-HLOS.bin
fastboot flash sbl1 radio\sbl1.mbn
fastboot flash rpm radio\rpm.mbn
fastboot flash tz radio\tz.mbn
11. reboot the phone and enjoy 2G and strong 3G signal
manu3556 said:
Hello, I have update my Yotaphone and now I receive WCDMA, but no gsm/edge signal .
I change the Rom (lollipop,kitkat,, HK rom, EU Rom)but I have always the problem :
I receive H, H+. But no Edge/GSM...
Can you help me.
Click to expand...
Click to collapse
good job deepmnd
thanks :good::good::good:
deepmnd said:
Fix for Yotaphone 2 YD206 from China
If you already flashed the phone to latest EU 5.0, you can skip 1-5
1. download via FTP: fw.ydevices.com/YotaPhone2/YotaPhoneFlasher/yotaphone2_flasher.exe and install
2. run flasher and download latest EU rom (2 - 5- 7)
3. turn off the phone and turn it on while holding volume down - this will boot the phone in "downloading..." mode
4. in the flasher press 1 (Flash the cellphone)
5. the phone is now on 5.0.0-EU1.1.124b and 2G is not working at all and 3G is connecting only to 2100 MHz (on my cell network)
6. download via FTP: fw.ydevices.com/YotaPhone2/Firmwares/CN/4.4.3-S01-003-CN1.0.3.32a.zip
7. unzip the file and copy \radio to c:\program files (x86)\yotaphone_flasher
8. run cmd and go to c:\program files (x86)\yotaphone_flasher
9. repeat step 3.
10. run next lines:
fastboot flash modem radio\NON-HLOS.bin
fastboot flash sbl1 radio\sbl1.mbn
fastboot flash rpm radio\rpm.mbn
fastboot flash tz radio\tz.mbn
11. reboot the phone and enjoy 2G and strong 3G signal
Click to expand...
Click to collapse
Hello!
I try to figure out what you did but I get stucked in number 10.
Actually I flashed my Yotaphone with the chinese radio the first time, but I don't get good connectivity.
Anyways I try to do what you wrote, but when I tipe the first line (first fastboot command), cmd keep saying waiting for the device... maybe is that I'm impatient but nothing happens.
I try other USB ports and nothing works...
So actually I don't know if I'm doing it right or if I have to wait for a longer period of time (10 minutes or more).
Any help would much appreciated.
Cheers!
Hi there,
you don't have ADB drivers installed. Google for "universal adb driver" and install. There is driver included with yota 5.0 firmware (C:\Program Files (x86)\yotaphone_flasher\Driver\Google), but any other adb driver should work as well.
And use original yota usb cable!!!
It shouldn't take more that a few seconds for those commands to execute.
MDans said:
Hello!
I try to figure out what you did but I get stucked in number 10.
Actually I flashed my Yotaphone with the chinese radio the first time, but I don't get good connectivity.
Anyways I try to do what you wrote, but when I tipe the first line (first fastboot command), cmd keep saying waiting for the device... maybe is that I'm impatient but nothing happens.
I try other USB ports and nothing works...
So actually I don't know if I'm doing it right or if I have to wait for a longer period of time (10 minutes or more).
Any help would much appreciated.
Cheers!
Click to expand...
Click to collapse
Had the same problem
Hi all, I had the same problem when I flashed russian firmware (YD201) over my phone which originally had honkong firmware (YD206).
I can inform that for me it also worked to flash the Chinese firware with yotaflasher.
However, when I tried to only flash the radio, it seemed it did not work. So I flashed the complete chinese kitkat firmware with yotaflasher and then afterward just removed/renamed the radio folder when flashing the newest russian lollipop firmware. Everything working great now, even was able to do some ota's without any problems since the ota's did not update anything of the radio img's.
And indeed you first need to make sure that you have the fastboot drivers installed and your device gets recognized as fastboot device by your PC.
You can test this by doing "fastboot devices". If you device turns up there as a fastboot devices, then the drivers and connection from pc to phone are ok.
Good Luck!
Thank you deepmnd and tomgaga.
Actually I had to activate developer options... And then reinstall the ADB cause, aparently I had it but it didn't work.
After that the instructions worked perfectly, but I still have network issues.
I don't know if it is because I have a MVNO (Mobile virtual network operator) and the phone has to change between the networks ( the one that provides the network and the MVNO).
I think that when it changes from one net to the other is when I lose connectivity and sometimes I have to search the network and choose it manually.
So this problem actually happened to me and the solution was to activate Roaming services (but I dont' know if is actually the same problem).
Anyways I can see that I connect to EDGE, HSPA/HSDPA and LTE.
For sure there is a way to monitor the network and check wich ones works.
Another guess is that being a phone for the chinese market, and the lack of the 900mhz band is causing this ¿?
So at the moment I'm losing signal just by walking on the street and I live in a big city. It seems that LTE and H works fine but I don't have a a way to assure this.
When I will have a spare time I will try to reflash the phone with the instructions deepmnd provided and see if it will work.
Thank you for your help!
Any advice will be appreciated!!
Update:
I try tomgaga approach I will test it just to see if is the network or my provider
Does anybody know which bands different firmwares support?
Reception is incredibly bad in my case (206 flashed with EU firmware).
It'd be nice if somebody has any info on unlocking different bands for yotaphone2.
kbal said:
Does anybody know which bands different firmwares support?
Reception is incredibly bad in my case (206 flashed with EU firmware).
It'd be nice if somebody has any info on unlocking different bands for yotaphone2.
Click to expand...
Click to collapse
Here you have the bands
https://www.frequencycheck.com/compare-devices/qkjseR/yota-yotaphone-2-yd201/yota-yotaphone-2-yd206
I have the same problem as you, I will try this weekend to downgrade to the older chinese rom and check if the reception get better.
And if then to the latest RU rom.
MDans said:
Here you have the bands
https://www.frequencycheck.com/compare-devices/qkjseR/yota-yotaphone-2-yd201/yota-yotaphone-2-yd206
I have the same problem as you, I will try this weekend to downgrade to the older chinese rom and check if the reception get better.
And if then to the latest RU rom.
Click to expand...
Click to collapse
Thanks for that, it helps a lot to clear the situation regarding the two models.
Now, taking in account deepmnd´s solution above, would it be possible to find those missing bands from the original 206 which are not available to the updated (and then international, 201-) version and add them individually, file by file via the fastboot flashing?
I followed deepmnd's instructions, and my phone now connects to GSM/EDGE, which was not possible before using the EU Radio (latest EU rom). Thanks for this!
Unfortunately it now preferably (!) connects to EDGE, although the LTE/WCDMA-Option is prioritized. I can force the phone to connect to WCDMA by using the WCDMA-only-option, but in this case it does not commit a fallback to EDGE if 3G is missing and I have no connectivity at all, unless I change the band-options and force a connect to EDGE. I'd like it to switch between the bands automatically, as my YD201 did without problems (in Germany).
Any hints to solve this problem?
Thanks in advance, Knut
deepmnd said:
Fix for Yotaphone 2 YD206 from China
If you already flashed the phone to latest EU 5.0, you can skip 1-5
1. download via FTP: fw.ydevices.com/YotaPhone2/YotaPhoneFlasher/yotaphone2_flasher.exe and install
2. run flasher and download latest EU rom (2 - 5- 7)
3. turn off the phone and turn it on while holding volume down - this will boot the phone in "downloading..." mode
4. in the flasher press 1 (Flash the cellphone)
5. the phone is now on 5.0.0-EU1.1.124b and 2G is not working at all and 3G is connecting only to 2100 MHz (on my cell network)
6. download via FTP: fw.ydevices.com/YotaPhone2/Firmwares/CN/4.4.3-S01-003-CN1.0.3.32a.zip
7. unzip the file and copy \radio to c:\program files (x86)\yotaphone_flasher
8. run cmd and go to c:\program files (x86)\yotaphone_flasher
9. repeat step 3.
10. run next lines:
fastboot flash modem radio\NON-HLOS.bin
fastboot flash sbl1 radio\sbl1.mbn
fastboot flash rpm radio\rpm.mbn
fastboot flash tz radio\tz.mbn
11. reboot the phone and enjoy 2G and strong 3G signal
Click to expand...
Click to collapse
Thank you! I had missed calls and did not know what caused them. Then I noticed this happened when I was not on LTE network but on WCDMA or 2G network. And this seems to have solved the issue for me as well.
Hello there,
I undertook to unlock the bootloader of my xperia x compact, of course without saving anything (bye the DRM keys), I then used the fastboot to install Paranoid Android v7.2.3, success after the second attempt.
So the phone started very well, but no SIM card recognized at the start of the phone. Possibly PIN code appeared after 10 min of ignition, loop on the "unlocking in progress" and then nothing, no network.
I have been back several times on the official rom via Sony Companion without success. Last night I tried to flash a rom stock with Flashtool. The operation was going well and oh miracle the sim card was detected directly, so I'm configuring the phone and installing all my applications, a reboot after all that and the SIM card had disappeared again.
Since I tried Flashtool several times without success, downgrade to 6.0.1 either.
After hours and hours of research I still do not have the solution, I have crossed several times on forums for the same kind of symptoms but always accompanied by an absent IMEI, but when I type *#06# my IMEI is displayed correctly .
If someone has already encountered this kind of problem I would love to talk to him. Thanks for reading me
Good night
PS: In other bug, the options for developers who freeze or the camera that does not take a picture (freeze when I want to take a picture)
PS2: sorry for my english guys
Did you select your APN under mobile networks
Sent from my F5321 using Tapatalk
9h0s7 said:
Did you select your APN under mobile networks
Sent from my F5321 using Tapatalk
Click to expand...
Click to collapse
Yes I have selected my APN, edited as my carrier said. The biggest problem is that the sim card is not detected immediately at startup. And when the sim lock pop up (about 5min after starting the phone) validation of the pin code is much too long to be normal. The code is accepted but I have no network, and when I try to search manually in the settings I have a loop on 'searching'. I think the problem comes from the modem / radio but I do not know too much these points, I just follow tutorials on the internet.
I say start from scratch but use Flashtool
Sent from my F5321 using Tapatalk
I've already started from scratch with flashtool, several times ...
Some news of my problem.
I have since tried several times to change rom, to flash the modem / radio.
Now my sim card is recognized, but still no network. I have wrote my APN correctly but still nothing.
The network appeared only once after the installation of Paranoid Android, but as in my previous post, after a mobile reboot nothing.
Namely that in the phone information menu, line data service: Disconnected and in this menu enable data connection does not change anything (I can't even enable it). Select radio band gives me 3 choices (Automatic, USA, Japan) and when I click on Automatic I get Set [Automatic] Unsuccessful.
If anyone can help me, I'm really starting to feel hopeless.
xooma37 said:
Hello there,
I undertook to unlock the bootloader of my xperia x compact, of course without saving anything (bye the DRM keys), I then used the fastboot to install Paranoid Android v7.2.3, success after the second attempt.
So the phone started very well, but no SIM card recognized at the start of the phone. Possibly PIN code appeared after 10 min of ignition, loop on the "unlocking in progress" and then nothing, no network.
I have been back several times on the official rom via Sony Companion without success. Last night I tried to flash a rom stock with Flashtool. The operation was going well and oh miracle the sim card was detected directly, so I'm configuring the phone and installing all my applications, a reboot after all that and the SIM card had disappeared again.
Since I tried Flashtool several times without success, downgrade to 6.0.1 either.
After hours and hours of research I still do not have the solution, I have crossed several times on forums for the same kind of symptoms but always accompanied by an absent IMEI, but when I type *#06# my IMEI is displayed correctly .
If someone has already encountered this kind of problem I would love to talk to him. Thanks for reading me
Good night
PS: In other bug, the options for developers who freeze or the camera that does not take a picture (freeze when I want to take a picture)
PS2: sorry for my english guys
Click to expand...
Click to collapse
Hi, i had the same problem. To enter the pin straight away simply go to the quick settings and check if you have the LTE tile there. If not add it. Then hold down on the LTE tile and it should open mobile data settings and then it takes about 5 seconds and it should ask for pin. I have no idea why it is like so but currently i am on paranoid android 7.3.1 and have no problems. Best wishes!
XperiaGUY47 said:
Hi, i had the same problem. To enter the pin straight away simply go to the quick settings and check if you have the LTE tile there. If not add it. Then hold down on the LTE tile and it should open mobile data settings and then it takes about 5 seconds and it should ask for pin. I have no idea why it is like so but currently i am on paranoid android 7.3.1 and have no problems. Best wishes!
Click to expand...
Click to collapse
Hi and thank you for your help
The situation has evolved since, the phone asks for the sim code directly but I still have no network. (see my last message)
Edit : Just noticed that i have an error in flashtool when flashing any rom "those data are not in fsc script and will be skipped reset kernel cmd debug, would you wish to continue ?
Someone ?
xooma37 said:
Some news of my problem.
I have since tried several times to change rom, to flash the modem / radio.
Now my sim card is recognized, but still no network. I have wrote my APN correctly but still nothing.
The network appeared only once after the installation of Paranoid Android, but as in my previous post, after a mobile reboot nothing.
Namely that in the phone information menu, line data service: Disconnected and in this menu enable data connection does not change anything (I can't even enable it). Select radio band gives me 3 choices (Automatic, USA, Japan) and when I click on Automatic I get Set [Automatic] Unsuccessful.
If anyone can help me, I'm really starting to feel hopeless.
Click to expand...
Click to collapse
Are you ticking the wipe boxes with flash tool
Sent from my F5321 using Tapatalk
9h0s7 said:
Are you ticking the wipe boxes with flash tool
Click to expand...
Click to collapse
Yes all boxes.
Here is my phone info
I can't manage to set radio on
Someone ?
Something similar happened to me recently and it was fixed by selecting my provider via wireless networks > mobile networks > service providers
In my case AT&T was selected when I chose Tmo and rebooted everything was fine. Good luck.
Sent from my F5321 using Tapatalk