Yesterday I upgraded my BA (T-mobile MDA 3) from WM2003 to WM6. It works fine, bit I can't fix the mms prolem...tryed to instal the cabs from "cabs".rar", but simply it isn't working. The device is from croatia and works on T-mobile.
Can anyone help????
Read ALL this thread, and we'll find some answers.
Thank you....I figured out.
BUT......
I have an other problem...after every soft reset, none of the buttons is working (except the green and red call). Is there any application that bypasses the system buttons setup? I found an app <AE Button Plus>, but the functions are poor ;(
Did you hard reset after flashing the rom ? I mean the N/Y/Y option thing
yeah, I followed the steps.... Every thing is fine now.
It's really funny.....when I fix one problem, new one shows up ;(
Now I need a bluetooth manager.
Found the solution!
It was by matlacki, basically just reflash stock ruu 1.32, re-root and restore your nanadroid and it's all good.
matlacki said:
I had the same problem yesterday and I found the solution (it works for me). Flashed stock RUU 1.32, rooted again, eng/radio-s off, again, flashed CW7 bulid 30 and my proxymity sensor is back to normal.
Click to expand...
Click to collapse
I have done the same and now my proximity sensor is working again when restored from my CM7 nanadroid.
This doesnt make any sense?!
==================================================
Btw i am using build 30
For those who having this proximity sensor issue like myself , I done a test.
Go to setting > CyanogenMod setting >display > automatic backlight > > tick use custom > edit other levels.
For me I can see my sensor functioning will. 7 for total darkness and 59 for din light and 190+ for lamp.
Now try to make a call and watch the screen go off. You can't on it back but there's still ringing tone.
I used my nexus one flash to shine on the sensor and my screen turned back on.
Now go back to the edit other lvl notice that the light sensor doesn't response to the different brightness.
A reboot will fix the problem but if there's s phone call,this bug starts again. Try it!!!
And share your results. If there's ppl with the same as mine, it might be a cm7 bug and not s proximity sensor failure
Its not a CM7 bug. I have never had the proximity sensor problem on any ROM, be it stock or otherwise.
I'm also using build 30 and no proximity sensor problem to report.
i want to believe its not a CM7 bug.
For the past 2 weeks when I was using various CM7 builds, I do not have any proximity issues as described by other users till yesterday, it just popped up.
Nandroid to my old backup (which has no such the problem), and problem still persist.
flashed back to RUU 1.32 rom and the sensor is working in sense rom.
So now i cant even send back for a replacement.
matlacki said:
I had the same problem yesterday and I found the solution (it works for me). Flashed stock RUU 1.32, rooted again, eng/radio-s off, again, flashed CW7 bulid 30 and my proxymity sensor is back to normal.
Click to expand...
Click to collapse
I have done the same and now my proximity sensor is working again when restored from my CM7 nanadroid.
This doesnt make any sense?!
This problem started yesterday evening for me. 5days of CM7 without issues and now this dealbreaker. Need to pull battery after end of a call.
Sent from my Desire HD using XDA App
try flashing 1.32 RUU and redo the whole rooting again > and back to CM7.
seems unreal but it really did solve my problem..
Okay...
I'm having the same problem, i just checked it with the program "Sensorlist" which gives me info about the proximity sensor....
With CM7 it doesn't work, but with stock rooted ROM it works fine...
So it must be a problem with the CM7 software....
Has anyone solved the problem, so it doesn't come back?
Solved my Problem, too.
And I guess I've found the reason for the Problem.
Within the last Days, I've played around a little with the ambient light sensor settings. Both, system side and also with the additional cyanogen settings.
Why do I come to that conclusion?
Well, I made a Backup of all my Apps and Settings via TitaniumBackup.
Then I:
- Wiped my phone via CW + Full-Wipe.zip
- Flashed this 1.72 via CW http://forum.xda-developers.com/showthread.php?t=884327. Tested it = everything fine.
- Wiped again + clean installed PNK_AB CM7. Testet it = everything fine.
- Restored my Apps + Settings. Failure retuned after restart.
Now I was sure, it is Software related.
- So I wiped the data partition via CW and restarted. Everything fine again. Even after Reboot.
- Time to restore Apps + Settings, but this time without the settings from the Cyanogen Apps/Settings, Debug App and SpareParts. Everything fine in first, but the problem retourned after reboot.
- So again: wiping data = everything fine. Rebooted about five times, te be sure. Everything fine.
- Restored Apps + Settings: without: Cyanogen Apps/Settings, Debug App, SpareParts AND SystemSettings.
Voila: The Problem was away and didn't even come back after several reboots.
So my conclusion:
CM7 ambient light settings and system ambient light settings mess each other up. Dunno, which is causing the problem, but it is solved for me, yet.
What's your Opinion guys?
My findings (with input from Apache14):
- The proximity issue only affects those with a non-Sharp LCD.
- The kernel source code released by HTC does not contain the correct code to handle this device. I am still looking for solutions.
- On the 1.32 kernel, when proximity is required, some polling mechanism is activated. I assume this is needed as there is no Interrupt hooked up on a hardware level on this LCD/chip (same sensor uC however).
- There is no source code for this. Not in HTC released kernel source or CM or AOSP.
Currently I am looking at either:
- Getting the latest source code for the DHD kernel which HTC has failed to release. The source code corresponds to some RUU older than 1.32.
or
- Hacking the kernel to do the same polling as present in the 1.32 kernel binaries.
McKebapp said:
Solved my Problem, too.
And I guess I've found the reason for the Problem.
Within the last Days, I've played around a little with the ambient light sensor settings. Both, system side and also with the additional cyanogen settings.
Why do I come to that conclusion?
Well, I made a Backup of all my Apps and Settings via TitaniumBackup.
Then I:
- Wiped my phone via CW + Full-Wipe.zip
- Flashed this 1.72 via CW http://forum.xda-developers.com/showthread.php?t=884327. Tested it = everything fine.
- Wiped again + clean installed PNK_AB CM7. Testet it = everything fine.
- Restored my Apps + Settings. Failure retuned after restart.
Now I was sure, it is Software related.
- So I wiped the data partition via CW and restarted. Everything fine again. Even after Reboot.
- Time to restore Apps + Settings, but this time without the settings from the Cyanogen Apps/Settings, Debug App and SpareParts. Everything fine in first, but the problem retourned after reboot.
- So again: wiping data = everything fine. Rebooted about five times, te be sure. Everything fine.
- Restored Apps + Settings: without: Cyanogen Apps/Settings, Debug App, SpareParts AND SystemSettings.
Voila: The Problem was away and didn't even come back after several reboots.
So my conclusion:
CM7 ambient light settings and system ambient light settings mess each other up. Dunno, which is causing the problem, but it is solved for me, yet.
What's your Opinion guys?
Click to expand...
Click to collapse
how can you remove these parts from the Rom? "the Cyanogen Apps/Settings, Debug App and SpareParts. "?
Sent from my Desire HD using XDA App
Numsefis said:
how can you remove these parts from the Rom? "the Cyanogen Apps/Settings, Debug App and SpareParts. "?
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Didn't remove them from the ROM.
I simply unticked them while/before restoring my FullBackup with TitaniumBackup.
For those that cant get proximity sensor to work on custom kernel/ROMS, try the following (no root required):
Code:
echo '0x50530b0c 0x140b0b0c' > /sys/devices/virtual/optical_sensors/proximity/ps_kadc
This will adjust the calibration values. The 0b part is the 'low tide' aka FAR start and 0c is the 'high tide' aka NEAR start.
IOW, values below FAR start is FAR, and values above NEAR start is NEAR.
Tested this on latest Buzz (Apache14) kernel.
Need to somehow make this persistent, and make sure it does not get reset during normal operation.
Stay tuned
Update: Still thinking of how to apply this at boot, maybe 'init.d' ? Also havent been reset during normal operation.
Thanks for the info
ok but how do you appli that ?
Text editor ? etc.
Flashing default (stock ruu) kernel
did it for me. Prox sensor working as intended.
Sent from my Revolutionized Desire HD using XDA App
I wrote an app to fix this.
See http://forum.xda-developers.com/showthread.php?p=11312762#post11312762.
Great work Leppie!
I had this problem, wile on CM6, started after I installed ADW EX. Used to use launcher pro, but realy liked the transisions in ex, so started using that, and got this problem. Updated to CM7, stil had the problem, no matter rom version. Went back to launcher pro, and now it works like normal. Thinking ther might be something with the launcher, and mabye a hardwere thing in some phones.
I am now on nihtly CM7 34, I think, and no problem.
So for those having this prob, try to switch to another launcher, and reboot a couple of times.
Hope this helps
how did you downgrade?
with Recovery?! or with Gold card?!
i have done both ways but didn't solve my problem :-(
please give me a link of Stock rom ruu!
I am writing on this thread as i still cannot add to the development thread yet
I am using Elelinux-7.0.0-Hero-v2.0. Thanks Ele for a great rom.
So far the only problem i have had is once the unlock screen went invisible on me.
I had to use the patch which worked fine. no black screen. everything else works great so far.
Just trying to contribute to the developers what i can to help.
Any one else has any issue yet.
Elelinux-7.0.0-Hero-v2.0
RADIO VERSION:63.18.55.06SU_6.35.17.03
Kernel: Herokernel-12a
I've had the same issue with the lockscreen but like yourself it was a once off.
Generally the ROM is great (however, this is the first ROM that I've flashed to my hero)
The only other issue im getting is with linking facebook with my contacts; for some reason FB keeps crashing. But keep in mind that I'm a retard in comparison to what you lads know about custom roms etc..... but slowly learning!
Sent from my Hero using XDA App
same problems
I have had the same problems as you. lock screen went invisible a couple of times. and my facebook does not work quite right.
Apart from that has been very stable. no problems or reboots. works great.
Running gingerbread with honeycomb theme on my hero. running at 691mhz is well good.
I have got widgets running on every screen to.
Elelinux RC4 version 7.0 V2.0
kernel 12a
691mhz
clockworkmod.
Thanks Ele for a great rom
After installed 2.0 patch, I still get blank screen (wall paper ok, no any widgets).
The only way to solve is restart
Any thing wrong with my installation? (same spec as above post)
The Bug seems to affect some phones and not others. Might be due to different hardware but not sure.
I am a network engineer. Not a developer.
There is a patch that fixes the black screen bug which might help. You might have to delete dalvik cache first though. But as said not a developer.
I just wanted to try some different roms and loaded cronos rom yesterday and is very good. So running that at the moment.
It is really fast and stable. The fastest i have used so far. But i have not tested everything yet like GPS. But admit i am becoming a cronos fan.
Cheers.
P.s i always backup my phone first and do a complete wipe before trying a new rom. Otherwise could get problems.
I use clockwork mod.
Unfortunately the bug your getting with black screens, invisible menus etc.. is an aosp bug that affects some devices which Google are unable to fix, if you had read through the thread you would have seen this. Ele is working hard on a fix for this but as CM no longer support the hero, its unlikely many cm7 roms will see many updates.
Sent from my HTC Hero using XDA App
Everyone is hoping that Google will fix the memleak and invisible manus problem. To fix it, one needs to undersatand the big picture on how these things are managed. I think it can be done only by experienced coder.
It's a real shame. i love gingerbread and did not want to go back to 2.1 or 2.2.
But might have to if they do not fix it.
I know Ele is working hard on a fix. using his rom at the moment. Was using cronos. But suddenly started getting random reboots and battery started only lasting a few hours and could not find out why.
Thanks to all devs and help.
Elelinux 7.0 v2.1 GPS reboot issue
Hi all,
I found Elelinux 7.0 v2.1 to be almost perfect.
The only major issue so far for me is that when running applications such as sportstracker that use GPS and are running in the background, that as soon as the GPS connection is lost (for whatever reason) the phone always seems to crash.
I wonder whether anyone else has seen this issue and whether there's a way to investigate it.
E.g. is it possible ot redirect logcat to the sdcard and then analyze the log file?
Regards,
MJ
Her0 V2.1 - USB problem
This is a weird one...
I flashed to Elelinux 's fab 2.1 the usual way....
I booted into the ClockworkMod Recovery V2.5.0.7
-- wipe cache partition
-- Advanced - Wipe Dalvik Cache
-- reboot
Then again within Clockwork Recovery I choose 'Install zip from sdcard'
I select the Hero rom and it flashes perfectly...
Now the problem ----> I cant get the usb port working to enable transfer of files?
When the phone boots up it shows 'preparing sd card'
Then when i connect usb lead to pc it shows 'usb connected'
When i then pull the screen down, i see 'usb connected - select to copy files to/from your computer'
When i select that tab, it just crashes back to the home page?
I see the icon at the top of the screen but when i pull down the screen and select as above, it crashes back to home screen again?
In settings, i have both USB debugging and USB debugging notify - all enabled.
Can anyone provide a solution to this issue for me..
thank you
The only way around this problem i think is to mount usb storage from recovery.
Sent from my HTC Hero using XDA App
Hey guys!
In the last week my wifi&BT stopped working suddenly, without any software change or new app installed. e.g. (when I swipe wifi, it looks like it is working, but cannot find any network)
mobile data still functions.
After reading quite a lot of manuals, I understood it might be a hardware malfunction, However, I tried to do few things already to understand if there might be another reason, none of the below worked
-Play with aeroplane mode and wifi.
-wifi fix applications
-Factory data reset.
-Wipe the phone and flash oxygen 3.1.0 via TWRP.
Before giving up, Wanted to ask if you have any advice that might help:
Any customized room that might will work?
Any way to check the phone log to understand what happens when we do it?
Any general advice?
Thanks in advance!
E.
try this rom
follow the guide completely
http://forum.xda-developers.com/oneplus-2/general/rom-hydrogenos-v1-2-0-sensors-t3264711
araaraara123 said:
Hey guys!
In the last week my wifi&BT stopped working suddenly, without any software change or new app installed. e.g. (when I swipe wifi, it looks like it is working, but cannot find any network)
mobile data still functions.
After reading quite a lot of manuals, I understood it might be a hardware malfunction, However, I tried to do few things already to understand if there might be another reason, none of the below worked
-Play with aeroplane mode and wifi.
-wifi fix applications
-Factory data reset.
-Wipe the phone and flash oxygen 3.1.0 via TWRP.
Before giving up, Wanted to ask if you have any advice that might help:
Any customized room that might will work?
Any way to check the phone log to understand what happens when we do it?
Any general advice?
Thanks in advance!
E.
Click to expand...
Click to collapse
Earlier today, my fingerprint sensor/home button completely stopped working.
I tried restarting, wiping cache and dalvik cache, re-installing the ROM, and I even went back to OOS and H2OS (both stock ROMs) to see if it would work. Alas, nothing worked.
A friend of mine then called me. I told him my home button is dead. He told me it happened to him once, and all he had to do was force restart the phone and it worked again.
I'll suggest that you try the same.
Hold the power button for ten seconds while your phone is on and it'll force restart.
Hope this fixes your problems, mate!