Related
Is there any news whether bluetooth volume issue is solved in 2.2? (Steph1.2.2?? Or official). Thanks a lot to all the peepz who make this forum great!
Sent from my Dell Streak using XDA App
Hi re960088
What Bluetooth volume issue is this then? as i have no issues using my Jawbone headset for voice calls or my Nokia BH-500 for streaming Stereo Music the volume is no different to how it has always been for me since i started using the Streak on its release and running 1.6.
Marc
Dogmann said:
Hi re960088
What Bluetooth volume issue is this then? as i have no issues using my Jawbone headset for voice calls or my Nokia BH-500 for streaming Stereo Music the volume is no different to how it has always been for me since i started using the Streak on its release and running 1.6.
Marc
Click to expand...
Click to collapse
This may be a subjective, technical, and / or use case issue. Some people have quite acute hearing and don't experience problems, some people don't use BT headsets while in noisy environments, or maybe the different Streaks have different volumes sent to BT for calls.
In my case, all volumes sent to BT are fine EXCEPT phone calls, which are approximately 1/3rd the volume of media at max volume.
[edit] another issue is the BT mic. In my case, BT tx is waaay to high...most environmental noises are heard louder than my voice.[/edit]
Some means for accessing the BT volume subsystem might be valuable. Apparently "louder volume hack" does not provide answers. If the official 2.2 update does not provide answers, I will be digging. While I am just able to make out conversations under typical conditions, if the calling party is quiet or mumbly, it just won't work!
Thx 4 the above. I use dell streak to call in my car -connect to bluetooth stereo. When it connects it says adjusting bluetooth volume,and the overall sound volume is so low i can barely hear my counterparts very annoying since i sm on the road a lot. Car stereo volume is set at max. Also tried other car no advance! If 2.2 does not fix this, i will have to return it unless some of the smart people here can fix it..thx
Sent from my Dell Streak using XDA App
Ive used 3different bluetooth headsets and not experienced any of those issues, so can't really say whether it will fix those particular ones.
But froyo does use different bluetooth stack so it may make an improvement to those who have issues.
I did notice that it's a lot more stable with my one jvc stereo headset. 1.6 used to hang quite a lot using that one in particular if I did a combo of button presses
Hi all,
there's definitely an in-call volume "issue" on the 2.1 build (certanly my O2 8105 anyway) when I hook up to either a BT headset or my car's Pioneer BT head unit. Music streaming is awesome, phone calls are only just workable.....
1.6 was much better on volume level but used to break up the sound really badly so I wonder if it was some kind of "fix" for that?
Hi all,
I have the Plantronics Discovery 975 bluetooth headset which has never given me problems before on previous HTC phones, but I now hear crackling whenever someone speaks...
Are there other bluetooth headset users with the same problem?
+1 voyager pro sametimes cracle sometimes no
Sent from my GT-I9100 using XDA Premium App
We bought two SGS2 and two Plantronics Discovery 975 Bluetooth headset at work. I got one of the phones and one of the headset and I'm having the exact same problem as you have. My other colleague who were happy enough to recieve the other phone does not have any cracking noise which is rather weird.
I even tried my headset connected to his SGS2, i had to make sure my head wasn't messing up the signal or something lol... and it worked fine, so it's something with the phone i guess.
In this thread they talk about KE7 having a new sets of Bluetooth profiles and what not. Perhapes Samsung recognized there was some bug and changed things around.. But i'm only guessing here.
In case anyone is wondering:
Yes, both phone and headset was fully charged when tested.
Yes, both phones and headsets were tested in the same room around the same time so it cant be interference from external sources as it didn't bother the other SGS2.
I'm using KE2 over here. I forgot to check what version my colleague is using but we got the phones the same day from the same store so I bet he is using KE2 as well.
Did both phones have WiFi enabled or disabled?
Come to think of it, I think i had it enabled on mine but not on the other phone. I'll try compare them again and this time have wifi off on both phones.
I had a 975 for about two weeks before I returned it. I wasn't getting consistent performance on either my G2 (HTC), G2X (LG), or Vaio P (Sony). I replaced it with a BlueAnt Q2 and didn't have any problems with the same devices. It works really well on the SGS2 for phone, media, and Voice Talk. The 975 also wasn't A2DP and I like to listen to music and audio on my headset sometimes.
I tried disabling the wifi, not sure if its just now or not but, it seems to be working better. I still hear the crackling noise every now and again but not like before. However i think i will keep using my SE MW600. It delivers more solid performance and the sound quality is better as well. Maybe it's because the MW600 supports A2DP.. i cant really tell.
HTC HD2 Tmobile USA I am also having serious crackling problems...to the point of contacting Plantronics to replace my Voyager Pro and pay $49 for refurbished headset. Distance to phone 2 feet and only getting 1 bar on bluetooth strength. Any sort of obstruction like moving head between headset and phone still at 2 ft away...noticeable crackling and 1 or less BT signal strength on phone. With Wifi enable crackling increases. Connecting to a linksys router just 3 ft away is quite fast but still only 3 signal strength. Turning off bluetooth causes a rise in wifi signal strength but zero bars if more than 10 ft from router. I hard reset but problems still existed.
Extensive research on the problem came across issues about bluetooth and wifi electronics on circuitboard are side-by-side and has something to do with the negative affect on each other.
Anybody have similar "crackling" audio or crackling sound and / or LOW signal when close to phone or wifi routers. I welcome any suggestions at this point.
CPU QUALCOMM 8250B
BLUETOOTH VER 2.1/2.1+EDR
OS 5.2.21913 (21913.5.0.94)
MANILA 2.5.20181424.0
ROM 9-29-10
RADIO 2.15.50.14
PROTOCOL 15.42.50.11u
Jawbone and bluetooth crackling
Hi,
I have a Jawbone Prime which I used for my iPhone 4, which was crystal clear, now I've used it a couple of times with my S GS2 and so far I'm struggling to get a clear call quality.
I thought it was the headset but I have tried it with a friends Advantax speakerphone and that happens the same, every 10 sec's it goes quite and crackles to the point that it's impossible to actual have a conversation!
My phone is only 3 weeks old is it worth exchanging it or will I get the same problem if its a software issue??
Help please
BTW I have just spoken to a lady from Samsung about this issue, to find out if it is a handset issue or software. After being passed around saying it was the headset, though I explained I have tried another 2 headsets, she now said my headset is not compatible.
When I asked her for a list of compatible headsets she put me on hold and then came back saying 'Please go to an accessory store to find out'.
I don't like being fobbed off but I believe Samsung are doing that to me and everyone else! I asked if they were fixing this issue, as there are other forums of this issue, she couldn't answer that question funny enough!
I'm now going to try another handset with my sim and the headset as I work in CPW, finger crossed!
I don't know if I am having the same issue as you guys. You are describing it as "crackling"? My connection falls into a state where the audio sounds as if the bandwidth is REALLY low. So the other person's voice is choppy - really fast choppy - I don't mean intermittent sound.
If I briefly transfer the audio to the phone and then back to the handsfree device again it clears up.
This happens in my car which has a Parrot CK6100 and also our BMW mini built-in bluetooth system.
I have a UK Orange branded SGS2 with KE2 firmware.
Could someone try doing the above and see if it clears up the audio?
As a side issue, stereo audio over a2dp works without problems so it is not a signal strength issue.
+1 Discovery 975
Better with wifi off, but still crappy sound.
I have been having a problem with my bluetooth crackling in my car for a very long time now. I did a search and found this very old thread. I wanted to bump it up to see if anyone else is having a problem like this and if there is any known troubleshooting steps we could take. As previous people have posted, stereo bluetooth works fine, its just on calls with my car that it intermittently crackles. I can toggle the connection to my phone and back to my car to clear it up, but who wants to do that? This happens nearly every call. I thought it was my car so I ignored it but I recently tried my phone in a different car and had the same issue. Ironically, I never have this issue with regular bluetooth headsets, only with cars. Anyone else have a problem like this?
I just assumed that I could use any bluetooth microphone for voip, voice recording etc. I currently do not have any bluetooth device but I tried 3 at a friends and they all paired for sound, but failed to work in using a voice recording app or a voip app. In a voip app the sound went strange (long sounds on the dial tone buttons) and then the sound resumed coming out of the tablet even though the headset device was showing as connected. Only a reboot solved this.
So I assume the bluetooth stack doesn't support recording, but why not? Isn't this a basic thing at this point? If I connect a bluetooth headset with mic that should be my input and output on sound for the time it is connected.
Or has anyone had success with a certain bluetooth model for recording?
No one can provide info on this? Is this the norm for tablets? I would assume even some ancient gingerbread phone would work with bluetooth headset/mic.
Does cyanogen team ever modify the kernel to include more functionality such as this?
I'd check other bluetooth threads around this section, but I've heard several people who've used bluetooth headsets with Nexus tablets. It may be a setting issue (particularly the device setting under bluetooth and the app settings concerning headsets).
-Ara
My Motorola HS850 works perfectly with the N7.
Sent from my Nexus 7 using Tapatalk 2
ExploreMN said:
My Motorola HS850 works perfectly with the N7.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Same here, Plantronics bluetooth headset works perfectly for voip calls using Talkatone.
Thanks for the info. I don't have the model names off-hand but I'll ask my friend what they were. I wasn't aware that once a bluetooth device was paried that there were any additional options. I was under the impression that it was simply pair and use. With the case of a headset/mic I assumed it was inherited as your sound output/input for all apps while paired. The voip I tried is csipsimple and a voice recording app. I'm glad to at least some models work but I hope it isn't hit and miss and you have to be selective of what bluetooth device you use but rather something I was doing.
I didn't expect there to be any settings as well because even with no bluetooth recording device paired, I don't see anywhere in the settings recording recording (like mic volume).
Can't get mine to work. Single ear set I don't even get sound. Just dead air all around. The Southwing SA505 stereo gets sound fine but no mic function and on Groove ip no sound or mic on single ear or stereo. I even checked the settings making sure bluetooth was selected.
I'm from Canada so I can't try talkatone as I can't get google voice. I now purchased a btheadset. It pairs fine and I hear audio in all apps but I haven't found one app yet that works with the bluetooth mic. I wanted a voip sip app. I've pretty much tried all the free ones and other users have posted comments of bluetooth issues as well. There are a couple of paid sip apps that claim to support bluetooth, but I don't want to buy them to only find they don't.
So yes, android supports bluetooth mics, my thread title is inaccurate, but it seems the vast majority of recording apps do not have proper bluetooth support. Can someone name any app besides talkatone, even a voice recorder that works with bluetooth so I can just test it?
I'm actually surprised it's this bad. Bluetooth audio isn't that cutting edge. It should pair and now act as your soundcard so to speak. I initially thought to blame the OS because I thought any app that requests to play a sound or record a sound, would be re-directed by the OS to now use the bluetooth device.
I'm pretty sure it works exactly like this on windows. Or for example, I have a usb headset on my pc. It shows up as a soundcard. I make it the default and every app now uses that. No developer had to code to use a usb headset/mic, it just works.
Again a little disappointed that it's been a little trying just to get a bluetooth headset to function properly. I tried 3 at my friends that all pair fine and work flawlessly on his playbook in all his apps, and now I bought 1 so it's hard to say all of these bluetooth headsets have quirks and don't work properly with android.
Still trying to get this working. It pairs fine, and shows in the bluetooth details as being connected with phone audio and media audio.
It's a Aluratek ABH01F which I've read great things about. It supports a2dp. I'm not too familiar with bluetooth and microphones so I'm not sure if there is anything else to check for android to support a bluetooth microphone.
I don't know why I didn't think of it before but I tried google's voice search and it doesn't work either. I can hear the audio fine, just no mic.
Can anyone confirm if google's voice search works with their bluetooth mic? You probably have to walk out of the room to verify it's not the units mic that is picking it up obviously.
I'm not convinced bluethooth mics work at all on the nexus 7. I could chalk it up to my headset just doesn't place nice with the nexus 7 but again I tried 3 bluetooth devices at my friends. I found this post on another site:
Well, I got around to testing a bluetooth headset. single earpiece, Avantalk AH28. Not the best, but it works fine with a phone. Paired with the tablet fine. I dialed on groove ip - dial tones came from the tablet, the ringing transferred to the earpiece, when phone was answered there was no sound transmission at all- not from the bluetooth earpiece, or from the tablet. Just dead air. Tried it twice.
2nd test- google music played from tablet- not into the earpiece.
I have a stereo bluetooth headset with mic that I can test with but will have to charge that one up first. Will get back to you.
************************************************** ****
Got to my stereo Southwing SA505 bluetooth test. It worked to play music from tablet beautifully. Did not work with groove IP- went in and made sure settings were set for bluetooth- Mic did not work.
Click to expand...
Click to collapse
http://www.nexustablets.net/forum/nexus-tablet-audio/985-does-headset-jack-have-microphone-capability.html
Again, I hear audio fine via bluetooth, so I wonder if some of you were thinking the bluetooth mic was working but it was actually the unit's mic.
This app called tapemachine specifically states it has bluetooth support. It fails for me when I change it to bluetooth in the settings, can someone else try it?
https://play.google.com/store/apps/details?id=com.samalyse.free.tapemachine&feature=nav_result#?t=W251bGwsMSwxLDMsImNvbS5zYW1hbHlzZS5mcmVlLnRhcGVtYWNoaW5lIl0.
So I'm starting to think my thread title is correct. If I am, I'm hoping there is a way to hack some file changing the available audio profiles. I've read others doing something similar with different devices when the manufacturer disable those audio profiles. I would find it doubtful that google/asus would do this though.
Anyway, if anyone can try that app, or confirm that say grooveip is using the bluetooth mic and not the device. An easy test is tap on the unit mic while recording and see if you or the person you are talking to hears that.
No one? I know a couple of you said it worked, but are you sure grooveip is actually recording via the mic? I can hear phone calls using various sip apps with bluetooth, but I know the mic isn't recording. One of the headsets my friend has is a Motorola MOTOROKR S9 Stereo Bluetooth Headphones. Link here: http://www.amazon.com/Motorola-S9-Bluetooth-Headphones-Packaging/dp/B0017KTOJK.
I've only tried stereo headsets, so maybe that is the issue. The Motorola HS850 is a single ear piece, I'm not sure what plantronics set you have.
I'd really appreciate if someone else can verify if bluetooth is working. If bluetooth recording in fact works with the nexus 7, I must be really unlucky with 4 headsets that don't, which I find highly unlikely or nexus 7 has poor bluetooth support. The only thing left is my bluetooth hardware is broken which I find even more unlikely. Aradreamer, you say you've seen several posts saying bluetooth works, but I haven't found one post explicitly stating bluetooth recording works. I found more post on other forums clearly stating it doesn't work.
sark666 said:
I'd really appreciate if someone else can verify if bluetooth is working. If bluetooth recording in fact works with the nexus 7, I must be really unlucky with 4 headsets that don't, which I find highly unlikely or nexus 7 has poor bluetooth support. The only thing left is my bluetooth hardware is broken which I find even more unlikely. Aradreamer, you say you've seen several posts saying bluetooth works, but I haven't found one post explicitly stating bluetooth recording works. I found more post on other forums clearly stating it doesn't work.
Click to expand...
Click to collapse
odd odd ...
first off i have the Nexus 7 16g with it rooted.
heres what i did first i bought the samsung HM1200 didnt thoroughly test that 1 because i figured it just wouldnt work with the device ( or was broken ) once i started to get all this screeching out of it... i heard sound momentarily then all it did was the screeching at different levels. returned it yesterday. then i added a couple more bucks ( about $27 total ) and got the plantronics M20 took it home and crossed my fingers. got it all it paired up and what not and ended up with the same condition except now the mic is working perfectly. i tested this thoroughly now over and over inside and outside and also away from the N7 to be sure the mic is working. this is great BUT i cannot hear any sound at all coming in to the N7 except the same screeching at constantly varying levels. this is with both grooveip and talkatone. i also tried uninstalling beats audio and rebooting but i read somewhere this wont change the drivers back to the originals and i still have the same condition. i just got the N7 about 3 weeks ago and the store where i bought it has a price guarantee so i am today planning to return it and get the N7 again but this time the 32g version. ( they got 2 left so i will be going ASAP. ) so almost all the work i put into setting this thing up is about to be wasted. still i am going to do it anyways. to me its just the point of getting the best i can with my available budget/resources and i can easily see this thing be full and kicking myself in the butt for not doing it. this time around i will test all of what i mentioned here BEFORE i root it. in fact i will only install the necessary apps ( grooveip/talkatone etc.. ) during testing. its a real pain in the butt but it is a MUST i have this thing working as a phone with BT asap. thanks for the input and i will report back later.
update: actually in a more quiet room i was able to hear myself on the BT headset but very very low and in the background behind the screeching. still will report back later with the new unit.
For some reason the Bluetooth headset profile on the n7 is totally broken. I tried MANY headsets and none of them work. It is either the drivers, the hardware or the kernel. I hope it fixable in the 3g version.
Sent from my Nexus 7 using xda premium
yep i am sitting here now with the 32g N7 and the first thing i did was try the BT unrooted and its the exact same thing screeching like mad can hear myself on the mic perfect from the other phone and can hear the other phone low in the background of the screeching on the N7 ugh
i have a temporary solution that should work till its sorted.... i need a new headset for my computer anyways so ill just make sure to grab one that is USB then when my OTG cable arrives i am pretty sure that should work. it will be corded but at least i can use the phone somewhat normally for free. ill let you know. now im off to rebuild the whole thing back to where i had it in the 16.
zip1212 said:
yep i am sitting here now with the 32g N7 and the first thing i did was try the BT unrooted and its the exact same thing screeching like mad can hear myself on the mic perfect from the other phone and can hear the other phone low in the background of the screeching on the N7 ugh
Click to expand...
Click to collapse
Bummer. Hopefully they fix it with 4.2 or with the 3G version.
It also seems that if you try to toggle speakerphone / BT headset in various voip apps the tablet will crash and restart.
I tried with GrooveIP, Talkatone and the build in phone app (After changing the framework-res.apk file).
I also noticed i had better luck getting the BT headset to fully (and randomly) work when doing outgoing calls. It never worked on incoming calls.
Any progress on this?
I've noticed the same problem and just returned a BT headset due to the problems in GrooveIP & Talkatone
As a side note I was able to get the BT headset to work as a MIC with the google voice commands by using the following..
- Soundabout
- Under BT settings set it to force mono BT mic
- Set audio to wired headset
Just as ref, I'm using my N7 in my car, so my setup may be a bit different.
But this worked, I was able to tell my N7 commands and it would read out the response over my car speakers.
Anyone had success with a USB mic? Curious if that will work.
I'm very interested in this thread too.
I have a 32GB nexus 7, rooted and unlocked. I have a Platronics M100 bluetooth earpiece. My goal is to be able to dictate to Evernote through the BT earpiece. It is pairing and under the connect settings it is showing up as "phone audio". But when I speak into it nothing is happening in Evernote. I also do not get media audio through the earpiece.
My Sony xperia Z accepts audio from bluetooth microphones, but only during a phone call.
When the call is terminated the paired bluetooth mic becomes inactive and the phones built in microphone takes over. I have tried many apps but none will accept audio from a BT mic.
I have tried a number of headsets and speakerphones and they all behave in the same way. Sound is not a problem as the BT speaker simply replaces the phones internal one when paired.
The xperia Z has a setting which claims to: " record audio through bluetooth headset if available", but this setting does nothing. I keep retrying the setting at every android update, to no avail. Currently at 4.2.2.
When I plug in a wired headset, the speaker and mic simply replace the ones in the phone. Why doesn't bluetooth behave in the same way?
This issue has been raised in many forums, in relation to many android devices, but never answered.
First post here, so apologies and let the flaming begin but I am trying to determine if my Nexus 4 "issues" are unique to me or normal for this phone.
1. Issue #1 - Bluetooth functions only for numeric dialing, no voice (say name phonetically) dialing or other voice actions seem to work. You can speak the numbers you wish dialed and that's about it. Maybe others can confirm whether this is unique to me. Android ver 4.2.1. Using with a Sena SMH10 bluetooth motorcycle headset
2. Minor issue, but also related - I can not use a stereo headset with my phone and expect the handset mic to work. Something that simply works in every other smart phone I've owned. You plug in a stereo headset (3 conductor earbuds only, not 4 conductor with mic for example) and the phone ideally recognizes the lack of 4th conductor and sends output audio to headphone while using handset mic. So, if you wish to make a call, you can do so. And if you wish to communicate with your phone using verbal commands you may do so as well. You may get "some" functionality using a 3 conductor headphone, however try making a call to someone and it simply doesn't work.
I don't think my phone issues are unique, but perhaps I got a lemon? Nexus support can't seem to confirm whether or not its a known issue.
Anyone else have these "features"?
Thanks in Advance.
Issue #1. Confirmed hands free dialing works over Bluetooth using blue ant s4. In fact I was excited they actually reworked the voice dialer to be accurate!
Sent from my Nexus 7 using Tapatalk
Well that's certainly weird. The headset I am using lists the following profiles:
Key Specifications:
• Bluetooth v2.1+EDR, Class1
• Supporting profiles: Headset Profile, Hand-Free Profile (HFP), Advanced Audio
Distribution Profile (A2DP), Audio Video Remote Control Profile (AVRCP)
The Settings tab of this headset in my Nexus say it is paired for:
-Phone Audio
-Media Audio
I have paired/unpaired and reset bluetooth device to factory.
This headset worked flawlessly with my previous phone, an HTC MyTouch 4G running Android 2.3
When i attempt a call, I get a prompt from the phone "Voice Dialer" that says:
"Say Call, followed by a name or a number"
If i speak the numbers to dial, it works perfectly. If I say the name of any person in my google contacts list, it balks and exits right away, sometimes saying "Sorry, I didn't catch that"
HF Dialing has been horribly broken in Android for some time. You might try disconnecting it from A2DP to see if that helps. For me, since I use a moto headset, I went with Motospeak and it works pretty well.
chas4android said:
2. Minor issue, but also related - I can not use a stereo headset with my phone and expect the handset mic to work. Something that simply works in every other smart phone I've owned. You plug in a stereo headset (3 conductor earbuds only, not 4 conductor with mic for example) and the phone ideally recognizes the lack of 4th conductor and sends output audio to headphone while using handset mic. So, if you wish to make a call, you can do so. And if you wish to communicate with your phone using verbal commands you may do so as well. You may get "some" functionality using a 3 conductor headphone, however try making a call to someone and it simply doesn't work.
Click to expand...
Click to collapse
This works fine for me. I've used it a number of times in the car, where I have a stereo cable to an FM transmitter, and I just tested it with a no-microphone set of headphones: my voice went through the phone microphone with no problems.
chas4android said:
Well that's certainly weird. The headset I am using lists the following profiles:
Key Specifications:
• Bluetooth v2.1+EDR, Class1
• Supporting profiles: Headset Profile, Hand-Free Profile (HFP), Advanced Audio
Distribution Profile (A2DP), Audio Video Remote Control Profile (AVRCP)
The Settings tab of this headset in my Nexus say it is paired for:
-Phone Audio
-Media Audio
I have paired/unpaired and reset bluetooth device to factory.
This headset worked flawlessly with my previous phone, an HTC MyTouch 4G running Android 2.3
When i attempt a call, I get a prompt from the phone "Voice Dialer" that says:
"Say Call, followed by a name or a number"
If i speak the numbers to dial, it works perfectly. If I say the name of any person in my google contacts list, it balks and exits right away, sometimes saying "Sorry, I didn't catch that"
Click to expand...
Click to collapse
I understand your frustration. Hands free dialing is a feature I don't like to do without. After jumping to jellybean from ICS on my fascinate handsfree was horrible.
When I set up my blue ant with any phone it goes through a "transferring contacts" part of the setup. Perhaps this is why it can recognize the peoples names and not just the numbers.
Does your headset "transfer contacts" like the S4?
Sent from my Nexus 7 using Tapatalk
No, the headset is strictly a phone headset as far as that goes. Not a sync device like some cars, etc. In that case, it might work since dialing could be handled by the Bluetooth device?
I'm no expert, but relying on the nexus dialer seems to be the issue. What baffles me is that when not using Bluetooth and using the Google voice search, it actually works. If pressing the "pickup/hangup" button actually launched Google voice actions... It would solve the problem as well as give me further hands free operations such as nav and music control.
Anyone know how to make that action occur with Bluetooth button?
As for #2, I actually called nexus device support, and while speaking to the rep plugged in my skull candy ear buds. He confirmed that mic sounded extremely garbled and not understandable. These same ear buds world fine on my old my touch and my girlfriends iPhone. Both of those phones recognize them as basic stereo headphones and keep the handset mic intact.
I'm going to call them back and just get a replacement today. Screen has done the flicker/vertical lines thing now at least once too.
I'm having bt issues with my car stereo. It's after market that worked fine with my GNex. I can pair it with the N4 and it shows Phone Audio, but then after a few seconds disconnects. Could bt be bad on my N4? I normally have the headphone jack plugged in through aux and can take calls that way, but I'd like to get bt working again.
Update: after powering off the stereo and powering it back on it seems to be connecting ok
Lttlwing16 said:
Issue #1. Confirmed hands free dialing works over Bluetooth using blue ant s4. In fact I was excited they actually reworked the voice dialer to be accurate!
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Just checked... Blue ant uses its own voice recognition to pair contacts with numbers and thereby bypasses phone voice dialer. That's why it works for you.
I just got a SMH10 as well. I am able to voice dial okay as well as use google music, what I don't like is no access to Google Now without handling the phone (which would require me to stop and get my phone out of my pocket). Not sure if this is an issue with the SMH10, or with android 4.2.x.
I know it's been over a month since you posted in here, curious about your usage and if you have found any tricks to get google now to work in place of the voice dialer only. Since google now should handle voice dialing I am hoping to get that to work so I can also use the navigation when needed.
Sending a note to Sena as well to see if they have a solution as well.
Hands free out-calling issue
As of last week the bluetooth hands free calling feature was working fine on my Nexus 4. A couple days ago I went to call out using the hands free, and the display on my car stereo went blank for a few seconds and came up saying 'Not Supported'. I can receive calls fine, but for whatever reason the hands free voice recognition doesn't want to open when I ask it to now. Anyone have a similar problem?
ssj4kevin said:
As of last week the bluetooth hands free calling feature was working fine on my Nexus 4. A couple days ago I went to call out using the hands free, and the display on my car stereo went blank for a few seconds and came up saying 'Not Supported'. I can receive calls fine, but for whatever reason the hands free voice recognition doesn't want to open when I ask it to now. Anyone have a similar problem?
Click to expand...
Click to collapse
I've had exactly the same thing happen. Weeks and weeks of working voice dialing through my Blueant S4. Now, it doesn't work at all. Incoming calls can be answered, but I can't dial out by voice.
I came from the Samsung galaxy S2.
With the S2, when I turned ON the BT toggle at the notification bar, I would immediately get a screen where I could choose which BT device I would like to connect to. With the LG G2, I get no such screen. What a bummer, I thought this was part of Android...
In any case, this is the least of my problems, since the LG G2 has a much more severe one - unreliable Bluetooth connection.I think I got to the root of this problem though:
When you connect a device to the LG G2 using BT, you can choose two options for this device: "Phone audio" and/or "Media audio" (A2DP). You can tick both, or just one.
When I tick only one of them, I get perfect stable connection (but then I can only use it for phone, or for music, not both...). The problem is when I tick both of them. What happen is that when a call comes in, or when a call is finished, the G2 has trouble getting back to "Media audio" (A2DP), and usually the BT disconnects. So, the trouble seems to be in the change between "Media audio" and "phone audio", when the G2 is required to make this change, most chances a BT disconnection will result.
I have this exact problem with two totally different devices (both of them worked great with the Galaxy S2), these two devices are:
1. Pioneer DEH-P980BT car CD receiver unit.
2. Sony Ericsson MW600 wireless headset.
I have the LG G2 D802.
You can long press the Bluetooth icon in the power bar to access this screen. This works better for me since I always have my Bluetooth on for the car, but need quick access for my Creative Bluetooth speaker.
earlthepearl said:
You can long press the Bluetooth icon in the power bar to access this screen. This works better for me since I always have my Bluetooth on for the car, but need quick access for my Creative Bluetooth speaker.
Click to expand...
Click to collapse
Yes I know, but as I said, this is the least of my problems regarding BT function with the G2....
Noam23 said:
I came from the Samsung galaxy S2.
With the S2, when I turned ON the BT toggle at the notification bar, I would immediately get a screen where I could choose which BT device I would like to connect to. With the LG G2, I get no such screen. What a bummer, I thought this was part of Android...
In any case, this is the least of my problems, since the LG G2 has a much more severe one - unreliable Bluetooth connection.I think I got to the root of this problem though:
When you connect a device to the LG G2 using BT, you can choose two options for this device: "Phone audio" and/or "Media audio" (A2DP). You can tick both, or just one.
When I tick only one of them, I get perfect stable connection (but then I can only use it for phone, or for music, not both...). The problem is when I tick both of them. What happen is that when a call comes in, or when a call is finished, the G2 has trouble getting back to "Media audio" (A2DP), and usually the BT disconnects. So, the trouble seems to be in the change between "Media audio" and "phone audio", when the G2 is required to make this change, most chances a BT disconnection will result.
I have this exact problem with two totally different devices (both of them worked great with the Galaxy S2), these two devices are:
1. Pioneer DEH-P980BT car CD receiver unit.
2. Sony Ericsson MW600 wireless headset.
I have the LG G2 D802.
Click to expand...
Click to collapse
My bt is flawless call comes in it switches to phone audio then switches back to media after call has ended, never had any random disconnects. D800
The disconnections are not random, it happens when the phone needs to switch between media audio and phone audio.
Maybe this is a problem with the D802 only?
Sent from my LG-D802 using XDA Premium 4 mobile app
havent experienced these issues here so far myself!
No problem either, transition between audio and calls then back to audio operate smoothly (D802).
No disconection problem either.
But I do find the Bluetooth audio volume very low (compared to my previous iPhone 4 on the same car audio system), as reported by other users.
i have sa,e error. no solve
I'm having a similar issue. I have a uconnect 430 system in my Jeep, and every time I end a call, the bluetooth audio streaming playback doesn't quit on me, but continues at a slightly lower pitch, and slightly slower pace. Really bizarre, and I can correct it by disconnecting the phone and powering off the car stereo, then reconnecting everything. Haven't really tried to troubleshoot just yet but saw your post and thought I'd chime in.
I connect to my 2011 Hyundai Genesis Coupe. I have no connection issues, the phone switches from Wifi to Bluetooth well. If a call comes in I can answer and talk through the car, when I end the call it will switch back.
Some issues I have noticed that are different from my HTC One X:
1. When I switch to the Bluetooth input the audio plays then stops and I have to hit play on the car controls.
2. The audio clips and distorts periodically. I believe this is related to the bitrate of the audio, and may be on the Hyundai side. I mention it because it only occurred now that I use the G2.
3. The car controls will stop working seemingly at random, I have to use my phone to skip or pause. First world problems.
Edit: ATT D800 Rooted, CleanROM XE, had same issues on stock.
TMo D801, 14 Toyota Corolla, no problems at all with it.
BT audio works very well with my car also (D801), one thing that annoys me is that it automatically starts playing music upon BT connection. Is there a way of making it so that I have to do it manually?
bachera said:
havent experienced these issues here so far myself!
Click to expand...
Click to collapse
This!
tiguy99 said:
This!
Click to expand...
Click to collapse
I think a lot off people have old bluetooth equiptment that might not play nice with new. what version bluetooth does the equiptment have you are pairing with and are there any newer versions? Even though bluetooth is standardised if you search you will find often certain equiptment doesnt play nice with it, hence the supperted devices.
tiguy, Knowing not all devices have this is, is important info isnt it? Of course I have different equiptment, so it may not be representative.
Sent from my LG-D802
mgmgb said:
BT audio works very well with my car also (D801), one thing that annoys me is that it automatically starts playing music upon BT connection. Is there a way of making it so that I have to do it manually?
Click to expand...
Click to collapse
Anyone?
My Bluetooth is flawless.
Sent from my LG-D803 using XDA Premium 4 mobile app
bachera said:
I think a lot off people have old bluetooth equiptment that might not play nice with new. what version bluetooth does the equiptment have you are pairing with and are there any newer versions? Even though bluetooth is standardised if you search you will find often certain equiptment doesnt play nice with it, hence the supperted devices.
tiguy, Knowing not all devices have this is, is important info isnt it? Of course I have different equiptment, so it may not be representative.
Sent from my LG-D802
Click to expand...
Click to collapse
At the moment I use my earpiece which is the Platronics Voyager Legend. It works flawless. I haven't done a car Bluetooth sync but from what I've read on the Web with my earpiece and other phones, i was very impressed that i have excellent call quality, sound & range when i listen to music directly on the earpiece
Noam23 said:
I came from the Samsung galaxy S2.
With the S2, when I turned ON the BT toggle at the notification bar, I would immediately get a screen where I could choose which BT device I would like to connect to. With the LG G2, I get no such screen. What a bummer, I thought this was part of Android...
In any case, this is the least of my problems, since the LG G2 has a much more severe one - unreliable Bluetooth connection.I think I got to the root of this problem though:
When you connect a device to the LG G2 using BT, you can choose two options for this device: "Phone audio" and/or "Media audio" (A2DP). You can tick both, or just one.
When I tick only one of them, I get perfect stable connection (but then I can only use it for phone, or for music, not both...). The problem is when I tick both of them. What happen is that when a call comes in, or when a call is finished, the G2 has trouble getting back to "Media audio" (A2DP), and usually the BT disconnects. So, the trouble seems to be in the change between "Media audio" and "phone audio", when the G2 is required to make this change, most chances a BT disconnection will result.
I have this exact problem with two totally different devices (both of them worked great with the Galaxy S2), these two devices are:
1. Pioneer DEH-P980BT car CD receiver unit.
2. Sony Ericsson MW600 wireless headset.
I have the LG G2 D802.
Click to expand...
Click to collapse
I had to install a firmware update to my clarion for the exact same symptoms, I was also having issues with the phone freezing up during the switch between call/music.
mgmgb said:
BT audio works very well with my car also (D801), one thing that annoys me is that it automatically starts playing music upon BT connection. Is there a way of making it so that I have to do it manually?
Click to expand...
Click to collapse
It's just the opposite for me. I would like to have the music to autoplay (without hitting the play button on the Belkin BT... connected to my
2004NissanBoseUnit).
BT is great with my VS980 (with Malladus ROM).
hyperxguy said:
It's just the opposite for me. I would like to have the music to autoplay (without hitting the play button on the Belkin BT... connected to my
2004NissanBoseUnit).
BT is great with my VS980 (with Malladus ROM).
Click to expand...
Click to collapse
Ha well there's got to be a switch for this somewhere but I've had no luck finding it.
Sent from my iPad using Tapatalk