So, bought the Gtab on Friday, got a 32gb unlocked (Sweet). So, here is the problem that appears to be happening to almost everyone.
My video playback is Horrible, I've tried multiple codex's, and different Resolutions.
The videos so far i've tried.
3,343 Kbps 1280x720 at 29.970 fps, AVC ([email protected]) (CABAC / 4 Ref Frames) .MP4 Container, Very Choppy.
1,390 Kbps 640x272 23.976 fps MPEG-4 Visual (Xvid) Advanced [email protected]) (BVOP2) .avi Container Very Choppy
5,000 Kbps 1280x720 29.970 fps, VC-1 (WMV3) ([email protected]) .wmv Container Plays Flawlessly
Everything but the .wmv will play flawlessly on my Vibrant. Actually .wmv's are the only thing that i have found that won't play on my Vibrant.
I will test more configurations, but so far i'm not pleased with the video playback on the galaxy tablet.
I've tried other video players off the market, Moboplayer, mVideoplayer, haven't tried RockPlayer yet, but i had it on my vibrant and I felt the playback was not as good. Maybe i'll try it on Honeycomb.
So, I guess list your experiences so far, and suggestions. I will update as I go and find things.
Reserved... (Pending List of known formats)
Working Audio Codex's (So far):
AAC Low Complexity 2 Channel, Best
MP3 2 Channel
WMA 2 Channel
None Working Audio Codec:
AC-3 (Any Channel)
Working Video Codex:
AVC/H.264 Base Profile for 720p/1080p 3 Ref Frames, 0 B Frames
MPEG-4 Visual (Xvid) (Unknown limitations)
VC-1 (Unknown limitations)
Vplayer works great for me
Unfortunately, the fact that Samsung kept their hands out of Honeycomb has a downside. As far as I know, the Tab supports no more video types than stock Honeycomb. Which results in almost no good support at all. I've come to deal with it and you can, too.
The majority of my videos (720p and 1080p mkv) are converted and compressed while maintaining the quality by using this setup:
http://forum.xda-developers.com/showthread.php?t=1102922
Worth it.
tsunami1609 said:
Unfortunately, the fact that Samsung kept their hands out of Honeycomb has a downside. As far as I know, the Tab supports no more video types than stock Honeycomb. Which results in almost no good support at all. I've come to deal with it and you can, too.
The majority of my videos (720p and 1080p mkv) are converted and compressed while maintaining the quality by using this setup:
http://forum.xda-developers.com/showthread.php?t=1102922
Worth it.
Click to expand...
Click to collapse
I found that this morning and tried it, i Converted 3 different files, and tried different settings, and they all run like crap. I guess i will try some other settings on it.
Who thinks Sammy should use Exynos in the tab? Tegra does not seem to be very friendly with respect to playback. I find it tough to believe that Tab looks so sluggish compared to GS2.
Just download a different movie player app. MoboPlayer works great, and it's free.
I downloaded Hall Pass 720 BRRip xvid and it looks amazing and works great...
Sent from my GT-P7510 using XDA Premium App
DroidHam said:
I downloaded Hall Pass 720 BRRip xvid and it looks amazing and works great...
Sent from my GT-P7510 using XDA Premium App
Click to expand...
Click to collapse
And its a .avi
Sent from my GT-P7510 using XDA Premium App
Whats wrong with just converting everything to hi-def MP4 on your desktop/laptop and dumping on your tablet? I mean the iPad does it with great success and gives the user the impression that it can play every video format??
The tab is a 10" screen, just about any video format 720p and above (hell even some 480p) will look just as good as 1080p on your 40-50" tv screen....or am I missing something???
kponti said:
Whats wrong with just converting everything to hi-def MP4 on your desktop/laptop and dumping on your tablet? I mean the iPad does it with great success and gives the user the impression that it can play every video format??
The tab is a 10" screen, just about any video format 720p and above (hell even some 480p) will look just as good as 1080p on your 40-50" tv screen....or am I missing something???
Click to expand...
Click to collapse
What program and settings do you use, then?
Ok, I just purchased the 10.1. I use it alot to play back mp4 and m4v videos that have been encoded by Handbrake. What I've noticed on the 10.1 is that while they look excellent, when panning, the video pans with a jerky motion and is not smooth.
Any suggestions? I've looked around the forum but have not found anything definite. I've encoded the video at 720p.
From what i've read and researched, Tegra 2 only supports H.264 with Mainline Profile, Meaning 3 Reference Frames and no B frames, i've encoded several 720p Videos that way at 5Mbps and they play flawlessly.
While researching, i came across someone that came up with a Profile on Handbrake. That is what I've been using to encode my videos and so far, everything works great.
I will continue to do more Research.
Just a fyi, it does support High Profile, but with a max of 4 reference frames and 3 B frames.
Check the very first post here:
http://forum.xda-developers.com/showthread.php?t=1060825
It also includes presets for High and Baseline.
buri73 said:
Background
As I understand it, Tegra 2 should playback up to High Profile 720p and Main Profile 1080p. However, with limitation on Honeycomb and/or lack of driver release by Nvidia, current crop of HC tablets do not playback anything above Baseline Profile smoothly. Future updates by Google/Nvidia should fix this issue, but it looks like we may have to reencode High/Main profile media for the time being.
Click to expand...
Click to collapse
Even he says it, Tegra 2 currently doesn't support anything above Baseprofile because of driver limitations
But that thread is a Very good reference on how to encode video using handbrake, for Tegra 2 Devices.
He wrote that before the 3.1 update. He should really take that out.
buri73 said:
Update 5/28: Honeycomb 3.1 upgraded TF101 can playback 720p High Profile natively!
Verified with native player and Mobo(HW playback). Modified steps 3-3.1 to reflect HP settings, added HP preset and sample. Enjoy!
Click to expand...
Click to collapse
Ahh I see it, right at the top, right now im testing it out, encoding a 720p video using his High Profile.
Metzenw said:
I found that this morning and tried it, i Converted 3 different files, and tried different settings, and they all run like crap. I guess i will try some other settings on it.
Click to expand...
Click to collapse
I've only converted mkv files, but for 720p ones I use 1280 max output width, 20 video quality, live video type, high h.264 profile, and veryfast encode speed. For 1080p I just change the profile from high to baseline. All of my videos (with the exception of Avatar.....Man that's a long movie) are cut by two thirds. I guess I should mention though that I have a Motorola Xoom til I can sell it and get a Tab
If that doesn't work, just contact the OP of that post. He's really good at giving prompt replies.
Thanks for the information guys, I really appreciate it!
I just got my tab today and I am bitterly disappointed in how poor it is in terms of formts supported. Non of my avi or mkv files play (and when I use a 3rd party app they lag like crazy).
Related
Anytime I try to play a video file that's 720p or bigger it the Video Player comes up with an error window saying "File cannot be displayed or played". I've tried playing the videos in Rock Player and they don't work there either (either jittery, don't play at all, or only display the first frame while the sound plays in the background).
For reference: all the files are in the mp4 container and are h264 or standard mpeg file type. I've even tried using TubeMate to download videos in 720p from YouTube and those don't work either. I've tried using an external MicroSD and same error.
All of these files work *perfectly* on my Galaxy Tab and any computer I try them on.
For reference, although it wouldn't make a difference, I rooted the device the second it came out of the box.
did a bit more research...found weird things.
Transcoding my videos to FFmpeg (still 720p) even up to around 2,000kbps (didn't try higher) bitrate...the videos worked fine. In h264 they didn't work at all. Currently transcoding a video a few times to test a theory...but I'll report back in a few minutes.
Ok even transcoding the videos smaller than the screen display size (960x540) doesn't make them work if they're in h264. I'm completely lost on this... I'd appreciate someone else trying this stuff out too and seeing if it's just my phone...
Tegra2 has no NEON support so neon version of Rockplayer will not work.
Also Tegra2 cannot decode high-profile H.264 video, which might be your case.
So can it run 720p mkv files then?
amtrakcn said:
Tegra2 has no NEON support so neon version of Rockplayer will not work.
Also Tegra2 cannot decode high-profile H.264 video, which might be your case.
Click to expand...
Click to collapse
Very strange...since Motorola listed H.264 under the codec list for the Atrix...
So what kind of limitations are there? I mean it plays *some* H.264 but not all...so where's the line? Pretty strange that it doesn't play the *MOST* used format in the world lol
metaldood said:
So can it run 720p mkv files then?
Click to expand...
Click to collapse
Haven't tried MKV but I've definitely narrowed it down to H.264. amtrak was definitely right, but trying to figure out what kind of limitations that entails.
You're going to want baseline codec, no b frames most likely.
Try handbrake - (http://www.handbrake.fr)
and put these settings in the "Advanced" tab commandline box
ref=5:bframes=0:me=umh:subq=9:mixed-refs=1:8x8dct=0:analyse=all:cabac=0
Andrmgic said:
You're going to want baseline codec, no b frames most likely.
Try handbrake - (http://www.handbrake.fr)
and put these settings in the "Advanced" tab commandline box
ref=5:bframes=0:me=umh:subq=9:mixed-refs=1:8x8dct=0:analyse=all:cabac=0
Click to expand...
Click to collapse
Have you tried it and seen it working? I'm encoding now using my normal H.264 profile just with 0 b-frames. Anyway to use the baseline codec without using the commandline? Don't want to have to do that everytime
metaldood said:
So can it run 720p mkv files then?
Click to expand...
Click to collapse
MKV is a general "container", the actual video is conpressed in different ways.
I'm not really familiar with the difference between high-profile and baseline, but lacking such support is disappointing.
hotleadsingerguy said:
Have you tried it and seen it working? I'm encoding now using my normal H.264 profile just with 0 b-frames. Anyway to use the baseline codec without using the commandline? Don't want to have to do that everytime
Click to expand...
Click to collapse
These are the settings that worked on the Zune HD, a device with the original tegra chipset from nvidia.
Those settings would be transferred over to that device without being re-encoded by the software, so I figure they are pretty much guaranteed to be supported by the Tegra 2 unless nvidia removed some of the featureset.
You should only have to enter the settings once unless you start manually changing the profiles..
amtrakcn said:
MKV is a general "container", the actual video is conpressed in different ways.
I'm not really familiar with the difference between high-profile and baseline, but lacking such support is disappointing.
Click to expand...
Click to collapse
Well I'm trying a transcoding right now with the commandline settings from the post above...it definitely takes a *long* time to encode with these settings (at least 3x as long).
At this point it's just better to encode in FFmpeg. It encodes *very* quickly and the loss in quality is unsubstantial for same-size files.
hotleadsingerguy said:
Well I'm trying a transcoding right now with the commandline settings from the post above...it definitely takes a *long* time to encode with these settings (at least 3x as long).
At this point it's just better to encode in FFmpeg. It encodes *very* quickly and the loss in quality is unsubstantial for same-size files.
Click to expand...
Click to collapse
I didn't really think about the encode time.. I have an i7 at home.. so it only took about 20 minutes for the average hr long tv show..
Maybe if you've got a shorter clip to test it would work better.. I'd love to see the actual video specifications for the Tegra 2.. but nvidia hasn't seen fit to post the exact profile specifications.
This makes me think we may be out of luck for high profile h264 on tegra 2 platforms, though..
http://www.engadget.com/2010/09/13/boxee-box-ditches-nvidias-tegra-2-for-intel-ce4100-pre-orders/ It was one of the reasons cited for boxee box ditching tegra 2..
hotleadsingerguy said:
Well I'm trying a transcoding right now with the commandline settings from the post above...it definitely takes a *long* time to encode with these settings (at least 3x as long).
At this point it's just better to encode in FFmpeg. It encodes *very* quickly and the loss in quality is unsubstantial for same-size files.
Click to expand...
Click to collapse
Aaaand doesn't work. I put the settings you used into the commandline and the file still doesn't work. Apparently the Atrix 4G just doesn't play well with H.264...
Andrmgic said:
I didn't really think about the encode time.. I have an i7 at home.. so it only took about 20 minutes for the average hr long tv show..
Maybe if you've got a shorter clip to test it would work better.. I'd love to see the actual video specifications for the Tegra 2.. but nvidia hasn't seen fit to post the exact profile specifications.
This makes me think we may be out of luck for high profile h264 on tegra 2 platforms, though..
http://www.engadget.com/2010/09/13/boxee-box-ditches-nvidias-tegra-2-for-intel-ce4100-pre-orders/ It was one of the reasons cited for boxee box ditching tegra 2..
Click to expand...
Click to collapse
heh I'm encoding on a Q9550 OC'd to 3.6Ghz. One of the best processors available for transcoding files aside from applications that use both the CPU and GPU in conjunction. It doesn't take *long* but for a 4minute 720p video (around 120Mb) it took almost 8 minutes. Encoding the same video with the normal H.264 profile takes about a minute and a half. Encoding it in FFmpeg took about 35 sec.
This make no sense at all a captivate will play L.3 720p MKV's all day and this phone chokes on lesser material? Something is wrong here, plus the whole excitement around a dual core tegra chip is that you will not have to re-encode anything just drop a file and play. In the brief time I with it today it was chocking on almost any 480p or higher video I threw at it. I also tried multiple video players from the market. These same videos even played fine on a inspire 4G except the L.3 720p that only play on the captivate.
After doing some more research apparently the tegra 2 for all its power sucks at High Profile H264. Which is almost every H264 file on my PC and on the internet. Since my captivate plays High L3.1 720p's I thought for sure this would.
Sigh I guess this isn't my dream phone...
Can someone upload a video to youtube showing the quality of 720p video running on Atrix???
alton987 said:
After doing some more research apparently the tegra 2 for all its power sucks at High Profile H264. Which is almost every H264 file on my PC and on the internet. Since my captivate plays High L3.1 720p's I thought for sure this would.
Sigh I guess this isn't my dream phone...
Click to expand...
Click to collapse
That's the thing...I encoded a few videos in other codecs and they worked great...even at 1080p and over 2,000kbps bitrate (basically what BluRay ends up converting down to for the most part). The processor wasn't even taxed at *ALL* (something like 18%). The problem with the high-profile H.264 is that the Atrix refuses to play it...not that it struggles with the actual video output.
The thought is that the tegra 2's gpu cannot hardware decode high profile H264..
What codecs did you use that worked well?
There are a lot of MP4 video clips that I cannot get to play on Xoom smoothly but they play back really well on my HTC Desire.
On Xoom the video is laggy while the audio is audible. This happened to both 720p and 480p videos. I used both the default player and Moboplayer to ensure I am using the hardware acceleration.
Strangely on my Xoom the Moboplayer can soft-decode 480p MP4 with ffmpeg and playback without any problem. 720 is smoother but the decoding was too slow which resulted in A-V async.
Again, all those clips play really well on my HTC Desire. Tegra 2 should be able to handle them.
Anyone knows anything?
Please search the forum before asking questions. This has been asnswered.
The problem you're having is to do with the clips using high profile encoding.
http://forum.xda-developers.com/showthread.php?t=968640&highlight=video
http://forum.xda-developers.com/showthread.php?t=968308&highlight=video
http://forum.xda-developers.com/showthread.php?t=972812&highlight=video
There's lots more. All I can say is, learn to love Handbrake and be prepared to have your computer running all night every night if you ever want to watch HD movies on this thing.
I dont agree; I have transcoded 2 blue rays, hellboy and start trek 2009 in about an hour each, using my imac and handbreak
Oh, and download Vitalplayer from the market for the best hd video playback..
wase4711 said:
I dont agree; I have transcoded 2 blue rays, hellboy and start trek 2009 in about an hour each, using my imac and handbreak
Oh, and download Vitalplayer from the market for the best hd video playback..
Click to expand...
Click to collapse
Yeah, well, I don't agree.
I converted 2 720p mkv 90 minute movies and a 40 minute 720p mkv TV show last night and it took 6 hours. This was done on an Intel Core 2 duo P750 2.26GHz
Not everyone has the same hardware. I suppose I could run out and buy an i5 or i7 for the sole purpose of encoding video for the XOOM.
Maybe Motorola can partner with a PC company. How about 20% off a new laptop when you buy a XOOM that way you will be able to take advantage of its HD video capability in 2 hours instead of six.
Digital Man said:
Yeah, well, I don't agree.
I converted 2 720p mkv 90 minute movies and a 40 minute 720p mkv TV show last night and it took 6 hours. This was done on an Intel Core 2 duo P750 2.26GHz
Not everyone has the same hardware. I suppose I could run out and buy an i5 or i7 for the sole purpose of encoding video for the XOOM.
Maybe Motorola can partner with a PC company. How about 20% off a new laptop when you buy a XOOM that way you will be able to take advantage of its HD video capability in 2 hours instead of six.
Click to expand...
Click to collapse
It all depends on your settings, and keep in mind that the imac is going to have similar hardware to your machine. The recommendation is to set max width to 1280, set B Frames to 0, turn off CABAC, 8x8 Transform, and Weighted P frames. If you do that, you'll find fairly consistent encoding times even with older hardware. Also, keep in mind that encoding is entirely processor bound and will do better the more cores you can throw at it.
mcnutty said:
It all depends on your settings, and keep in mind that the imac is going to have similar hardware to your machine. The recommendation is to set max width to 1280, set B Frames to 0, turn off CABAC, 8x8 Transform, and Weighted P frames. If you do that, you'll find fairly consistent encoding times even with older hardware. Also, keep in mind that encoding is entirely processor bound and will do better the more cores you can throw at it.
Click to expand...
Click to collapse
Been there done that. There are no shortcuts. Good quality takes time or more cores. Or harness the GPU ie CUDA but that causes horrendous macroblocking in bright scenes.
No matter how you sugar coat it, re-encoding video is a time consuming pain in the ass for most people.
I also seem to remember there are multiple versions of the imac, with variable hardware specs, from dual core up to quad core 3.6GHz - so your claim of similar hardware seems unlikely.
..........
e.mote said:
>I converted 2 720p mkv 90 minute movies and a 40 minute 720p mkv TV show last night and it took 6 hours.
Suggest using 800 max width for substantially faster encode speed and smaller size. Quality diff is negligible on a 10".
If using 2-pass, switch to 1-pass for both faster encode time AND better quality.
Unfortunately, HB doesn't provide x264's speed presets. You can gain additional speed (at cost of some nominal size increase) with the faster presets. Hmm, I should update my HB script to allow "downloadables" as input.
>The recommendation is to set max width to 1280, set B Frames to 0, turn off CABAC, 8x8 Transform, and Weighted P frames. If you do that, you'll find fairly consistent encoding times even with older hardware.
Encoding to baseline profile (what the above basically means) gains speed by disabling more advanced "compression" features. The trade-off is significant size increase, about +30% vs high profile.
Using a lower res allows more efficient settings. At 800 width, you can use main profile. Speed diff between main & baseline is insignificant. Speed gain for the lower res is substantial.
Click to expand...
Click to collapse
I appreciate that your trying to help, but those are the settings that I have been using already: 1280, set B Frames to 0, turn off CABAC, turn off 8x8 Transform, and turn off Weighted P frames....
and it is still taking well over 3 hours to re-encode a 1:30 movie.
I understand that lowering the resolution will decrease the encoding time, but I consider that a last resort compromise. In fact I would consider that basically a failure of the XOOM.
I have considered buying an i5 or i7, but I feel stupid buying a new laptop for the sole purpose of encoding for the XOOM, when I could just pick up my Galaxy Tab and just play these videos immediately. No encoding. Just copy them over and play.
I am quite sure those videos are not high profile. Their bitrates were around 2M, way below 20M.
And, as I said, I can even do soft-decode to play the 480ps which does not play well with hard-decoding.
480ps, man. 480ps. Stunning.
e.mote said:
Last edited by e.mote; Today at 10:19 PM. Reason: reply removed, as recipient can't read
Click to expand...
Click to collapse
Your sarcasm needs work. It lacks creativity. And removing the original post is just immature.
Digital Man said:
Your sarcasm needs work. It lacks creativity. And removing the original post is just immature.
Click to expand...
Click to collapse
I don't really care about the encoding stage, I have an i7-950 which encodes a blu-ray in handbreak in well under an hour.
What I'd like to know, is are the codecs really this lacking, and will we see a solution?
I, like the OP have a HTC Desire and I could be devastated to find the XOOM can't handle the videos my Desire can.
Does it natively support mkv? I like to watch TV episodes in mkv like the 86MB Big Bang Theory episodes.
All my non-TV stuff I rip myself so I'm not concerned. Other than the DRM wmv I buy. Which play back fine on my galaxy tab.
alias_neo said:
I don't really care about the encoding stage, I have an i7-950 which encodes a blu-ray in handbreak in well under an hour.
What I'd like to know, is are the codecs really this lacking, and will we see a solution?
I, like the OP have a HTC Desire and I could be devastated to find the XOOM can't handle the videos my Desire can.
Does it natively support mkv? I like to watch TV episodes in mkv like the 86MB Big Bang Theory episodes.
All my non-TV stuff I rip myself so I'm not concerned. Other than the DRM wmv I buy. Which play back fine on my galaxy tab.
Click to expand...
Click to collapse
Most TV shows that are 720p mkv, and are privately enoded, and downloaded, average about 1.2 GB and will and not play. Support for MKV as a container isn't a problem, its the profile of the h264 video in the container that is the problem.
If the Video that you like to watch is only 86MB, that doesn't sound like high profile 720p. So it might play, only way to know is to try or download mediaInfo and check its properties.
Good to hear that the i7 that you have can do a blu-ray in an hour. That sounds like what I should do eventually. Wonder if an i5 will do as well. I've heard that the i7, though it has 4 physical cores, is seen as 8 due to multithreading, wheras the i5 is limited to 4.
I watched two re-encoded episodes of fringe last night, and the Video on the XOOM is really amazing. It actually is almost worth the wait.
Digital Man said:
Most TV shows that are 720p mkv, and are privately enoded, and downloaded, average about 1.2 GB and will and not play. Support for MKV as a container isn't a problem, its the profile of the h264 video in the container that is the problem.
If the Video that you like to watch is only 86MB, that doesn't sound like high profile 720p. So it might play, only way to know is to try or download mediaInfo and check its properties.
Good to hear that the i7 that you have can do a blu-ray in an hour. That sounds like what I should do eventually. Wonder if an i5 will do as well. I've heard that the i7, though it has 4 physical cores, is seen as 8 due to multithreading, wheras the i5 is limited to 4.
I watched two re-encoded episodes of fringe last night, and the Video on the XOOM is really amazing. It actually is almost worth the wait.
Click to expand...
Click to collapse
That's correct, it's an 8 threaded processor, running on an Asus ROG III Gene.
As for the videos I'm watching:
Video
ID/String : 1
Format : AVC
Format/Info : Advanced Video Codec
Format_Profile : [email protected]
Format_Settings_CABAC/String : Yes
Format_Settings_RefFrames/String : 4 frames
Format_Settings_GOP : M=4, N=48
CodecID : V_MPEG4/ISO/AVC
Duration/String : 20mn 24s
BitRate/String : 465 Kbps
Width/String : 624 pixels
Height/String : 352 pixels
DisplayAspectRatio/String : 16:9
FrameRate/String : 23.976 fps
Standard : NTSC
ColorSpace : YUV
ChromaSubsampling : 4:2:0
BitDepth/String : 8 bits
ScanType/String : Progressive
Bits-(Pixel*Frame) : 0.088
StreamSize/String : 67.8 MiB (77%)
They're not 720, but they're nice enough on my Galaxy Tab. They are High Profile @ L4.0 though which I'v heard a lot of bad-mouthing about on the forum lately. I'm no expert on media codecs and frankly couldn't care as long as theyre watchable. I'd love to know I could rip my Blu-Rays at 720p and watch them on the XOOM comfortably though.
What you are posting is interesting. Its high profile, but low bit rate. Some of the early claims for the Tegra 2, which is used in the XOOM, said it actually could play high profile but only at a low bit rate, but I haven't heard it confirmed. I suspect this video will not play, but later on I will try encoding a video in a simliar manner to yours and see what happens.
Digital Man said:
What you are posting is interesting. Its high profile, but low bit rate. Some of the early claims for the Tegra 2, which is used in the XOOM, said it actually could play high profile but only at a low bit rate, but I haven't heard it confirmed. I suspect this video will not play, but later on I will try encoding a video in a simliar manner to yours and see what happens.
Click to expand...
Click to collapse
Great, if you like I can dropbox the file I have and PM you the link for testing. These files playback flawlessly using the Galaxy Tab with every single player software I have tried, whether hardware or software decoding. FOr them not to play on the XOOM would be a killer.
Got your file. Sorry, it plays but with no sound. I tried RockPlayer and Moboplayer and the System Player and all play the same - silent.
The Video is actually pretty good. Smooth and very acceptable. So I guess it can technically play high profile, very low bitrate files - just not with sound. Have to Play around some more and see if I can learn anything else that might get this to play correctly or figure out what the problem is.
Edit: Actually, this is a Divx encoded file, not h264, so that is why it plays. So I am a little surprised about the lack of audio. And its only mp3 audio!!! This is really amazing. I can't believe the XOOM isn't playing this correctly. Has to be a way.
Update: Ok, success! It does play correctly in Rockplayer in software decoding mode. With sound. So it looks like you will have no problem.
Digital Man said:
Got your file. Sorry, it plays but with no sound. I tried RockPlayer and Moboplayer and the System Player and all play the same - silent.
The Video is actually pretty good. Smooth and very acceptable. So I guess it can technically play high profile, very low bitrate files - just not with sound. Have to Play around some more and see if I can learn anything else that might get this to play correctly or figure out what the problem is.
Edit: Actually, this is a Divx encoded file, not h264, so that is why it plays. So I am a little surprised about the lack of audio. And its only mp3 audio!!! This is really amazing. I can't believe the XOOM isn't playing this correctly. Has to be a way.
Update: Ok, success! It does play correctly in Rockplayer in software decoding mode. With sound. So it looks like you will have no problem.
Click to expand...
Click to collapse
Interesting, if somewhat concerning that it won't play this in the standard players or with hard-decoding even though it uses mp3 audio.
How about VPlayer Advanced? I find this plays most of my videos nicely on the Tab.
Probably just lack of Divx support in hardware. Thats not a big deal, even a single core CPU of lower power can easily decode low res, low bitrate Divx. I don't consider that a flaw at all. Software decoding video like this with the XOOM's dual core A9's is trivial. Results are fine. Just need an app like RockPlayer that does it. XVID files will probably not work in hardware either.
From Motorolas website:
PLAYABLE FORMATS
AAC, H.263, H.264, MP3, MPEG-4, ACC+ Enhanced, OGG, MIDI, AMR NB, AAC+
Digital Man said:
Probably just lack of Divx support in hardware. Thats not a big deal, even a single core CPU of lower power can easily decode low res, low bitrate Divx. I don't consider that a flaw at all. Software decoding video like this with the XOOM's dual core A9's is trivial. Results are fine. Just need an app like RockPlayer that does it. XVID files will probably not work in hardware either.
From Motorolas website:
PLAYABLE FORMATS
AAC, H.263, H.264, MP3, MPEG-4, ACC+ Enhanced, OGG, MIDI, AMR NB, AAC+
Click to expand...
Click to collapse
Yeh that's pretty fair I guess. How do you think it would manage if converted to MP4? I can do it on my 950 when I get home and send you it if you like? I'd not mind converting the whole lot if it played in the stock player.
Hi folks,
Is there any posibility of a lagfree playing of those videos ?
It sucks watching Videos with less than 20fps...
3.1 is supposed to improve playback... just no idea if it will improve 720/1080p playback
Sent from my A500 using Tapatalk
I use Handbrake and imported these setting I found on the net.
https://sites.google.com/site/theiveryinc/a500files
That Google site is mine.
Converts all my 720p.mkv files perfectly, the only issue is the files are big, 2-4 GB, but the quality is outstanding. They even play on 'Movies' which darkens the navigation bar.
i was looking for something like this so many times before, but I never found a stable movie app. On my Samsung Galaxy S II however, it's no problem at all. And that's a freaking phone man! But it's no wonder the hole system is so fast. It makes my newly aquired Iconia looking really sluggish and outdated :-( I don't know if I gonna keep this tablet or gonna look my movies on a 4.3" screen...
I asked Acer customer support whether they're ever going to support additional formats and they replied that they won't ever add support for MKV and can't comment on the rest. So official support for MKV is out the window.
Mkv isn't a video format, it's a container. It's just that most mkv's don't contain only baseline h.264, which is the only supported video format currently. The most benefit would come from adding support for main or high profile h.264
themono said:
Mkv isn't a video format, it's a container.
Click to expand...
Click to collapse
I know, it still doesn't help at all if the video player application or framework don't support the container format. I personally love MKV, it's handy to slap in two different audio tracks and subtitles in English, Finnish and the hearing-impaired version, plus any metadata about the movie itself. No need to hassle with several files then.
The most benefit would come from adding support for main or high profile h.264
Click to expand...
Click to collapse
Indeed. I tried transcoding a 1080p movie to 720p in constant quality mode, both in baseline and high profile modes, and while the quality was the same the high profile one used a lot less storage space. With storage space being rather scarse on mobile devices....
Well, we can only hope. But I don't know if the DSP is beefy enough to decode high profile or if it can be re-programmed to support it. Some DSPs are hardcoded and can't be used for anything other than what they already do when shipped. I don't know anything about Tegra 2 internals so I don't know what to expect.
godashram said:
3.1 is supposed to improve playback... just no idea if it will improve 720/1080p playback
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
I use 3.1 atm, but there is no mentionable ddifference to 3.0.1
The nVIDIA Tegra 2 250 is fully able to hardware decode:
H.264
VC-1 AP
MPEG2
MPEG-4
DivX 4/5
XviD HT
H.263
Theora
VP8
WMV
Sorenson Spark
Real Video
VP6
and encode:
H.264
MPEG4
H.263
VP8
And this is for 1080p both enc/dec
Why ACER can't (won't) support them is beyond me! Even my Single Core 7" Samsung Galaxy TAB can play all 1080p videos I have thrown at it!
And here is the full spec of the Tegra 2 250 Link!
Is it maybe because of that, that I play these videos from my USB-HDD?
dgcxsk said:
Is it maybe because of that, that I play these videos from my USB-HDD?
Click to expand...
Click to collapse
You can always copy one of them to the TAB and see if there is any change ( I doubt it)
Using a OLD 60gb usb hdd (literally 8 years old)
And it does not seem to matter - even with the low speed of an old external drive I have no issues playing video from it.
.Mkv -- Regardless of where it is stored is not going to work on the Iconia right now - i don't think there is anything anyone can do or change to fix that right now - the system will not?/can not? use the hardware decoder on mkv files - and software decoding, even for a low bit rate video file is always going to suck.
Hopefully 3.1 will improve our video performance - but I find it a very simple matter to just transcode a video file if the only source I have handy is mkv. Plenty of great and free tools that make the process pretty darn easy. I watch a lot of movies/TV on my a500 - and get a great experience as long as I don't throw .mkv files at it.
WereCatf said:
Indeed. I tried transcoding a 1080p movie to 720p in constant quality mode, both in baseline and high profile modes, and while the quality was the same the high profile one used a lot less storage space. With storage space being rather scarse on mobile devices....
Well, we can only hope. But I don't know if the DSP is beefy enough to decode high profile or if it can be re-programmed to support it. Some DSPs are hardcoded and can't be used for anything other than what they already do when shipped. I don't know anything about Tegra 2 internals so I don't know what to expect.
Click to expand...
Click to collapse
My understanding is tegra2 will support h.264 high profile up to 720p @ 20mbps, but only baseline profile for 1080p.
With regard to the container format vs video format thing, I'm under the impression that container format support can be added by an app - so even if Acer never support mkv in the default player, if they do add hardware high profile h.264, then other apps should be able to play an mkv that contains high profile h.264 with hardware acceleration.
entropy.of.avarice said:
Hopefully 3.1 will improve our video performance - but I find it a very simple matter to just transcode a video file if the only source I have handy is mkv. Plenty of great and free tools that make the process pretty darn easy. I watch a lot of movies/TV on my a500 - and get a great experience as long as I don't throw .mkv files at it.
Click to expand...
Click to collapse
From playing around with PRIMEE, mkv containers are split appropriately and if the video format is supported hardware decoding works. The problem is that there is no support for AC3 therefore majority of compatible MKVs will play very well but have no sound.
Unfortunately once software encoding is enabled we are back to the same stuttery playback issues.
I personally don't believe it's Acers' job to add playback compatibility, I personally believe it should be built into Honeycomb as a baseline. Honeycomb is a tablet OS and as such should be expected to play popular video and audio. codecs. Saying that, if manufacturers did add additional codec support it would be a solid competitive edge.
Use mobo player.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
patterson12123 said:
Use mobo player.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Have you read any of the thread, running moboplayer doesn't help, as I mentioned above as soon as you enable software decoding HD MKVs start to get choppy.
hellcat82 said:
From playing around with PRIMEE, mkv containers are split appropriately and if the video format is supported hardware decoding works. The problem is that there is no support for AC3 therefore majority of compatible MKVs will play very well but have no sound.
Unfortunately once software encoding is enabled we are back to the same stuttery playback issues.
I personally don't believe it's Acers' job to add playback compatibility, I personally believe it should be built into Honeycomb as a baseline. Honeycomb is a tablet OS and as such should be expected to play popular video and audio. codecs. Saying that, if manufacturers did add additional codec support it would be a solid competitive edge.
Click to expand...
Click to collapse
Ah, that's good to know, so with a baseline h.264 payload an MKV will play fine on stock?
I think it probably IS Acer's job to add codec support, frankly. At the end of the day we're talking about hardware acceleration, and Android provides the software framework for that to work, and it's up to the hardware vendor to make it work with their specific hardware.
Frankly I think Nvidia should be doing it though - it'd do wonders for Tegra 2 sales if they offered up code to support hardware acceleration for their platform on Android.
I guess you didn't really do your research on video playback on Honeycomb tablets, did you?
You can not blame Acer for poor HD playback when, frankly, this is a Google/nVidia issue. Currently no 10" Honeycomb tablet can playback high profile encoded HD vides--smoothly, if at all--without reconverting said movies.
There may or may not be a *real* fix in the future (quad core Tegras are right around the corner, so...), only time will tell.
OrionBG said:
The nVIDIA Tegra 2 250 is fully able to hardware decode:
H.264
VC-1 AP
MPEG2
MPEG-4
DivX 4/5
XviD HT
H.263
Theora
VP8
WMV
Sorenson Spark
Real Video
VP6
and encode:
H.264
MPEG4
H.263
VP8
And this is for 1080p both enc/dec
Why ACER can't (won't) support them is beyond me! Even my Single Core 7" Samsung Galaxy TAB can play all 1080p videos I have thrown at it!
And here is the full spec of the Tegra 2 250 Link!
Click to expand...
Click to collapse
edgie168 said:
I guess you didn't really do your research on video playback on Honeycomb tablets, did you?
You can not blame Acer for poor HD playback when, frankly, this is a Google/nVidia issue. Currently no 10" Honeycomb tablet can playback high profile encoded HD vides--smoothly, if at all--without reconverting said movies.
There may or may not be a *real* fix in the future (quad core Tegras are right around the corner, so...), only time will tell.
Click to expand...
Click to collapse
I bought an ACER device so I'll blame them! Problem here is that the Tegra 2 chip is capable to decode and encode the formats at 1080p without problems! The fact that Google still hasn't taken advantage of this feature doesn't mean that ACER couldn't!! To back my words here is an example:
Samsung! The Galaxy S and Galaxy TAB (7") they have much superior video codec support! I'm playing 1080p movies just perfectly on the Galaxy TAB. Samsung have invested in codec support and optimized it for the platform (both Hardware and Software) The Hummingbird CPU is Single Core! So why can't ACER do it? Maybe because they never did something like this before? Maybe because the have done only the hardware till now and they don't have the programmers that can pull this of? Ones the managers at ACER understand that selling thees devices without enhancing the base that Google provides won't cut it, I think we will have a very good device (not that it isn't good now but...)
OrionBG said:
I bought an ACER device so I'll blame them!
Click to expand...
Click to collapse
Guess you'll have to "blame" every single manufacturer out there who have a Honeycomb tablet out too, then.
OrionBG said:
tl;dr
Click to expand...
Click to collapse
So does the Samsung 10.1 play 1080p videos smoothly?
From what I've been reading.. no. Frankly, watching a 1080p on a 10" tablet is pointless (which is what I'm assuming you're crying about). If 720p isn't "good enough" on a 10" tablet, well, then, time to buy a 17" laptop.
Is it possible to play mkv format with 1080p resoloution in galaxy tab 10.1 ?
if so which players could do it?
which softwares are suitable for video convert?
and other video related soloutions for galaxy tab 10.1 to be discussed here
List of available softwares for video convert:
1-Handbrake (free)
Download page
Information page
Tutorial for 10" Display (thanks to buri73 )
2-Any Video Converter (AVC) ($29.95)
Download (trial)
Information page
3-DVD Catalyst ($9.95)
Download (trial)
Information page
4-Aiseesoft Blu ray Ripper ($39)
Download (trial)
Information page
5- ...
Recommended Video player applications on honeycomb :
1- MoboPlayer
2-...
No, and besides what's the point? The screen is not even 1080p. You can try Moboplayer and see what happens. Best advice is to recode the file down to 720p mp4. Try Handbrake or Freemake.
LordLugard said:
No, and besides what's the point? The screen is not even 1080p. You can try Moboplayer and see what happens. Best advice is to recode the file down to 720p mp4. Try Handbrake or Freemake.
Click to expand...
Click to collapse
I dont have the tablet yet but I'm going to buy and doing some research now,
how if we dont convert the file format ? is it possible to watch or is it laggy?
does the sound and the screen match?
Why would you do that?
The screen resolution is not even 1080 pixel height.
Don't you know that?
It's a waste of resources.
Try to get 720p instead.
taha_e said:
Does anyone know if it is possible to play mkv format with 1080p resoloution in galaxy tab 10.1 ?
if so which players could do it?
Click to expand...
Click to collapse
taha_e said:
I dont have the tablet yet but I'm going to buy and doing some research now,
how if we dont convert the file format ? is it possible to watch or is it laggy?
does the sound and the screen match?
Click to expand...
Click to collapse
Let me know what your research shows. I've been converting blu ray and mkv into 720p mp4 using DVD catalyst 4, real simple setup. From what I found out, mkv files do not work on any tablets because mkv is a container. If you convert it to mp4 then any tablet can handle it, including my phone galaxy s captivate . Takes me an average of 3-4 minutes per TV show and 10-20 on a movie. I stopped encoding at 1080p because there was not much difference other than size of file.
Sent from my GT-P7510 using XDA Premium App
they work but not with high profile settings. you need to reduce them.
you can google what high profile for mkv is.
The answers you are looking for: http://forum.xda-developers.com/showthread.php?t=1060825
mkv is not a format, its a container for H.264 format.
You should be asking "is it possible to play 1080p H.264 in the galaxy tab 10.1?"
The answer is yes BUT (and a BIG BUT) you can only do so if the H.264 file is encoded in the old H.264 baseline profile which nobody uses anymore.
Tegra 2s video accelerator is way to slow to play H.264 videos that are encoded in the popular Main/High profiles which everyone uses today. Yes its unfortunate but you have to recode all your videos to baseline profile if you want to watch on ANY tegra 2 based units.
5thElement said:
mkv is not a format, its a container for H.264 format.
You should be asking "is it possible to play 1080p H.264 in the galaxy tab 10.1?"
The answer is yes BUT (and a BIG BUT) you can only do so if the H.264 file is encoded in the old H.264 baseline profile which nobody uses anymore.
Tegra 2s video accelerator is way to slow to play H.264 videos that are encoded in the popular Main/High profiles which everyone uses today. Yes its unfortunate but you have to recode all your videos to baseline profile if you want to watch on ANY tegra 2 based units.
Click to expand...
Click to collapse
The tab, along with every other Honeycomb 3.1, tegra 2 device plays H.264 high profile 720p and main profile 1080p video just fine.
Although given the screen resolution, playing back 1080p video of any profile is pointless.
hoodoomagic said:
The tab, along with every other Honeycomb 3.1, tegra 2 device plays H.264 high profile 720p and main profile 1080p video just fine.
Although given the screen resolution, playing back 1080p video of any profile is pointless.
Click to expand...
Click to collapse
Correct it CAN play them back but at only very low bitrate and 1080p is not pointless since you can hookup to TV or monitor via HDMI
I did some testing on bitrates for the Teg2 at 720p HP here,
http://forum.xda-developers.com/showpost.php?p=15054949&postcount=250
it does OK at 6Mb/s, and chugs when bits hit 10Mb/s. 6Mb/s avg is about the ceiling for most 720p videos, so one can generalize that the Teg2, at HC3.1, will play a fair number of 720 H264 HP videos (in MP4 format). Ruminations are that HC3.2 will speed things up a bit further.
The clip, along with others, are here if anyone wants to try them:
http://www.mediafire.com/?depxt4zyvpwel
I've played with h.264 video on the Gtab, Use Baseline profile for best results. I've done some encoding in High Profile, and baseline, and compared screen captures, and you can't tell the difference, it has mostly to do with Compression, the higher your Profile (Ref Frames, B Frames, CABAC) the smaller your video file will be without suffering Quality lose. Just that higher profile requires more horsepower to decode, which Tegra 2 does not have.
hmm samsung should have gone with the SGS II guts. It plays pretty much whatever you throw at it
ph00ny said:
hmm samsung should have gone with the SGS II guts. It plays pretty much whatever you throw at it
Click to expand...
Click to collapse
Honeycomb only supports Tegra 2 CPUs. HC 3.2 brings support for Qualcomm CPUs. I could only wish this thing had the SGSII CPU.
Yeah, much as I like my Tab, I always feel like I'm taking a step back when I use it after using my SGS2...both in speed and display. I'd queue up in the pouring rain for a week to get a SAMOLED tablet.
5thElement said:
mkv is not a format, its a container for H.264 format.
Tegra 2s video accelerator is way to slow to play H.264 videos that are encoded in the popular Main/High profiles which everyone uses today. Yes its unfortunate but you have to recode all your videos to baseline profile if you want to watch on ANY tegra 2 based units.
Click to expand...
Click to collapse
Which explains why I am playing 720p24 high profile h.264 with no problems. Oh. Wait. No it doesn't.
Tegra 2 can handle high profile fine at 720p as long as you avoid wighted p frames. However the stock player does not. Enter diceplayer, built on the NDK and supporting all T2 decode capabilities. The stock player is totally borked.
1080p however is another problem. But you'll probably hit the fat32 4GB file size limit with those anyway before you encounter issues with high profile content. None of my 1080p MKVs will fit on the device anyway due to the fat32 limitation, so transcoding it pretty much a given. So I tend to go to 540p or even 480p just to save space. The screen is small, and while I can tell the diffeence between a clean 720p encode and 480p it doesn't bother me in this scenario. And if you drop down to 480p weighted p frames work again.
So, essentially Mr. Element, you don't what the hell you're talking about.
Sent from my GT-P7510 using XDA Premium App
I can only support what ianken said. I can play 720p hig profile just fine with Diceplayer.
Here is a test clip to see on your own. http://www.multiupload.com/CJU6YB5JC3
It is in High 4.1 Format
just thought id let you know it does play 720p mkv files just fine (tested on my galaxy 7" with no skipping or slowness at all) assuming since it works on the 7" the 10" wouldnt have any issues with it.
Danstek said:
Honeycomb only supports Tegra 2 CPUs. HC 3.2 brings support for Qualcomm CPUs. I could only wish this thing had the SGSII CPU.
Click to expand...
Click to collapse
Not entire true since manufacturers can add their own drivers to the OS
I highly doubt gingerbread is tailored to a single platform
bilsmaks said:
just thought id let you know it does play 720p mkv files just fine (tested on my galaxy 7" with no skipping or slowness at all) assuming since it works on the 7" the 10" wouldnt have any issues with it.
Click to expand...
Click to collapse
I'm can play 720p high profile without any issues on Galaxy S Captivated. Gtab 10.1 and other HC tablets are using tegra2, that has some issues playing mkv high profile 720p. So far maker of diceplayer are the only one who have figured out how to make use of tegra2 to decode high profile 720p.
Sent from my GT-P7510 using XDA Premium App
One of my favourite things about the Tab 10.1 is video format support. My #1 use for the device is watching videos during my morning/afternoon commutes. I download some videos the night before, and drop them onto the SD card in the AM. The Tab was able to play all of the formats I threw at it in 720p no problem, in the stock video player.
The first thing I noticed when I turned on my TouchWiz-updated tablet this morning is that none of the videos on it work. They show up as thumbnails in the gallery and video player, but cannot be played. In Moboplayer, the 720p files struggle because it's now relying on software decoding.
Is anyone having different experiences, or have a work around? I really hope this is not an intended change, or I'm probably going to return it. Too bad as I otherwise really like the update!
The update broke 720p high profile support. 720p baseline still works fine and the difference in image quality is negligible imo.
I hope they fix it in the near future, but as it stands now you either take the improved browser in this TW update, or go back to stock 3.1 or one of the older TW leaks and get 720p high profile support.
That sucks! I am assuming it is a bug and they will fix it.
I apologize for the upcoming noobish question as I'm not particularly familiar with codec's, and don't know the different between baseline and high profiles. I'm assuming I can convert one to the other in one step with handbrake? And would the difference in size be substantial?
duraeas said:
That sucks! I am assuming it is a bug and they will fix it.
I apologize for the upcoming noobish question as I'm not particularly familiar with codec's, and don't know the different between baseline and high profiles. I'm assuming I can convert one to the other in one step with handbrake? And would the difference in size be substantial?
Click to expand...
Click to collapse
Yep use handbrake and the baseline profile attached to this post: http://forum.xda-developers.com/showthread.php?t=1060825
Just queue up your files and walk away. I think the files might end up slightly larger but I'm not 100% sure, either way it isn't a big difference.
I'm also assuming it's a bug as high profile playback was a feature that was added in HC 3.1
DICE player is still able to play my 720p high profile (in a mkv container) smoothly.
sylvesterrr said:
DICE player is still able to play my 720p high profile (in a mkv container) smoothly.
Click to expand...
Click to collapse
Interesting... I'll grab it and try when I get home. Do you know if it is designed for the Tegra 2 and using the GPU to decode the video (I'm assuming it is otherwise it should be stuttering)?
duraeas said:
Interesting... I'll grab it and try when I get home. Do you know if it is designed for the Tegra 2 and using the GPU to decode the video (I'm assuming it is otherwise it should be stuttering)?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1181938
It states it uses hw acceleration on Tegra2 devices.
all the mp4 vids i had are still playing nicely on mobo player
Can anyone comment on DivX/AVI support?
I picked up my GT10.1 today, and since it supports DivX out of the box, gave some a try. I was disappointed that the picture broke up and pixelated repeatedly on every AVI I tried. So, I installed Mobo Player and tried it in software mode, but got exactly the same results (which surprised me somewhat).
I also have an Asus Transformer, and those AVIs play flawlessly on the TF using Mobo Player in software mode (since Asus didn't add hardware support for DivX).
I'm wondering if this is related somehow to this issue, since my GT10.1 came with Touchwiz.
Regards,
Dave
720p High Profile H264 is indeed broken. Verified in Mobo Player and System Media Player.
How do I know they are high profile? I made them, and because I only encode in high profile via handbrake.
Bummer because the Tegra2 handles 720p High Profile H264 wonderfully prior to this update.
I have 4 video players loaded because the built in video player couldn't play all of the videos that I have loaded. Ironically I have the exact opposite experience of the OP, it now plays all the formats I have loaded.
TabGuy said:
I have 4 video players loaded because the built in video player couldn't play all of the videos that I have loaded. Ironically I have the exact opposite experience of the OP, it now plays all the formats I have loaded.
Click to expand...
Click to collapse
Can you tell us which players you use? Do you need all of them? Does one work better (produce better quality) than the others? Thanks.
hoodoomagic said:
The update broke 720p high profile support. 720p baseline still works fine and the difference in image quality is negligible imo.
I hope they fix it in the near future, but as it stands now you either take the improved browser in this TW update, or go back to stock 3.1 or one of the older TW leaks and get 720p high profile support.
Click to expand...
Click to collapse
This is extremely disappointing news because one of the things I love about the SGT is the quality of its video playback. My friend has a Xoom and he was blown away when I showed him some hi-def videos I downloaded.
I have a lot of high-def videos I downloaded straight from Vimeo, and they play flawlessly on my SGT without any conversions whatsoever. The thought of having to use Handbrake -- or anything else -- to convert every video I own is not very appealing to me. I hope Samsung fixes this problem.
cameraz said:
Can you tell us which players you use? Do you need all of them? Does one work better (produce better quality) than the others? Thanks.
Click to expand...
Click to collapse
I have mVideoPlayer, which I like the best. I also have ES Video Player which comes with the ES File Explorer. And, I also have VPlayer.
VPlayer will play anything I throw at it. I've never had it not play a video. I only downloaded it because it's required by Remote Potato. Remote Potato lets me play Recorded TV from my Windows Media Center cable card tuner.
To be honest, this is sort of souring the update for me. I'll be testing when I get home to confirm there is no problem playing back lower resolution files. Still, I like to keep a few high-def movies on my Tab and don't want to convert them all. I hope this is a very temporary problem, not something that gets fixed for the 3.2 build.
I don't know if this is related, but when I was trying out the new Kies app on my PC with my tab connected over Wifi, it (Kies on the PC) offered to download new codecs when I first tried to transfer a video over to the Tab. My PC shouldn't have needed new codecs since all the video play on my PC.
sylvesterrr said:
DICE player is still able to play my 720p high profile (in a mkv container) smoothly.
Click to expand...
Click to collapse
x2, just tried it out and it worked fine with my high profile 720p videos in mkv and m4v.
https://market.android.com/details?id=com.inisoft.mediaplayer.dice
Just to add, the TW update apparently fixed ac3 audio playback.
my video players including the stock player play "high profile" m4v and mkv's perfectly
what a dumb thing to do Samsung..
BluesTele said:
my video players including the stock player play "high profile" m4v and mkv's perfectly
Click to expand...
Click to collapse
Well, the stockplayer can't play this pixar short movie. At least, it doesn't on my Tab... Dice Player plays it smoothly.
Code:
Seems stream 0 codec frame rate differs from container frame rate: 47.95 (48000/1001) -> 24.00 (24/1)
Input #0, matroska, from 'for.the.birds.2000.720p.bluray.x264-sinners.mkv':
Metadata:
doctype : matroska
Duration: 00:03:25.24, start: 0.000000, bitrate: 640 kb/s
Stream #0.0(eng): Video: h264, yuv420p, 1280x688, PAR 1:1 DAR 80:43, 23.98 fps, 24 tbr, 1k tbn, 47.95 tbc
Stream #0.1: Audio: ac3, 48000 Hz, 5.1, s16, 640 kb/s