Related
if anybody has a copy of the old AndroidRevolution HD 1.1 for Samsung Galaxy note 2 , i would really appericate it. I've been pulling my hair out trying to get ver 3.0 to work, but with no success. I assumed it would be as easy as 1.1 , but i was wong. One of my mistake was not making a backup after the 1.1 installation. So i'm stuck with an old image that atleast has CWM. So if anybody has this.. Thank you in advance!
thats what my repository is for
http://forum.xda-developers.com/showthread.php?t=1926506
hope it helps bro
This is great,thank you! but the links for the 1.0,1.1, and 2.0 are dead. I really appreciate the effort though. Hoping someone out there has 1.1
then mike must have taken them off...
I have 2.0 and I can Share it via dropbox, but would it help ya?
Sent from my GT-N7100 using xda premium
Jobiza said:
I have 2.0 and I can Share it via dropbox, but would it help ya?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
I can give it a try :fingers-crossed: , but if anything i'll hold on to it for a few unless i can't get 1.1
Why not let us disagnose your problem with 3.0?
AFAIK, 3.0 is much more improved than 1.1.
Here it is, Hope you can get it working. http://db.tt/WBP5iUSZ
Sent from my GT-N7100 using xda premium
Jobiza said:
Here it is, Hope you can get it working. db.tt/WBP5iUSZ
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Results are in and it WORKS!
With a huge grin on my face: Thank you
as to troubleshooting why 3.0 dosn't work for me, i honestly don't know what to tell you. I spent a lot of time researching it and i'm just dumb founded. If i had a spare note 2 i would try to get to the bottom of it, but alas thats not the case (too scared to brick my phone).
<--- happy once again :victory:
flipmodess said:
Results are in and it WORKS!
With a huge grin on my face: Thank you
as to troubleshooting why 3.0 dosn't work for me, i honestly don't know what to tell you. I spent a lot of time researching it and i'm just dumb founded. If i had a spare note 2 i would try to get to the bottom of it, but alas thats not the case (too scared to brick my phone).
<--- happy once again :victory:
Click to expand...
Click to collapse
Great! I'm Happy for being help.
Sent from my GT-N7100 using xda premium
4.0
Now Android Revolution HD 4.0 has came out but still can't download it
zyx5189 said:
Now Android Revolution HD 4.0 has came out but still can't download it
Click to expand...
Click to collapse
If you go to the main thread, it'll be there. Btw i was able to install 4.0 with no problems at all. Makes me wonder whats so different about 3.0 that makes it fail to install. Anybody have any ideas?
Sent from my GT-N7100 using Tapatalk 2
Revolution HD 19.0
Hi all,
First post ! I'm not totally new on this forum, I've been consulting them since my very first Android and Smart phone about 3 years ago when I bought the HTC Desire. I did create account back then in order to communicate with you guys, but I never got the privileges for posting so... I just kept reading.
New account made just now because I wanted to share my experience and maybe post a couple of questions (even tips, who knows) - and it does work now, which is nice ! So... Hello !!
I was an HTC protagonist and hated Samsung for their phones made of Taiwanese plastic and their Apple-like designs and commercial strategies... until my employer introduced a new Android application and provided us with new Samsung Galaxy Note 2 devices. Well - let's just say I was amazed on one hand by the speed and capabilities of my new device and disappointed on the other hand by my beloved HTC One X. It's just that - everything works better ! The only annoying bit was the keyboard, which is far less practical than the one on Sense... but that was easily set right with the installation of AI Keyboard and its Gingerbread theme.
So - my phone had just completed its very first charge after I unpacked it when I decided to root it immediately, install CMW6 recovery and flash it with Revolution HD 19.0 - which worked like a charm !
I'm very happy with this ROM ! My battery lasts clearly longer than that of my colleague's stock devices (about 48h with normal use - including a bit of gaming during number 2's, use of Wifi most of the time and Bluetooth in the car). The response is slightly faster too - for instance that app we use for work works just a little bit faster on mine. Same thing for Youtube, Facebook, Despicable Me (cool game :cyclops: ) and so on...
During the flashing it suggests the installation of some apps - well a few of them weren't installed after flashing although I did select them (I remember Maps was not installed for instance... unfortunately I don't remember what else I had to install manually). That means I'm not entirely sure all the tweaks suggested during the flashing were indeed enabled. I couldn't find any Revolution HD specific section in the settings (like you'd have on a Cyanogen ROM) - and couldn't find any app either to test and play with those tweaks. So can someone tell me if there's a way to find/modify those specific options/tweaks ?
What I also can tell is that one of my colleagues, who received the Note 2 the same day as I did, followed me with the rooting and flashing with his device... He seems to have been less lucky than me - he tells me every once in a while, when waking up the phone, he has no reaction when trying to unlock it (he just uses the screen swipe). He has to put it back to sleep and wake it up again before he can unlock it... Is this something that happens to anyone ?
So there you go - my experience is nearly flawless ! I love this ROM and will continue using it !
By the way : does anyone know how updates work with this ROM ? Do I have to backup my apps and data whenever a new Revolution HD ROM comes out for my phone and restore that backup after upgrade ? Or is there some kind of OTA-like update available ?
monkoid said:
Hi all,
First post ! I'm not totally new on this forum, I've been consulting them since my very first Android and Smart phone about 3 years ago when I bought the HTC Desire. I did create account back then in order to communicate with you guys, but I never got the privileges for posting so... I just kept reading.
New account made just now because I wanted to share my experience and maybe post a couple of questions (even tips, who knows) - and it does work now, which is nice ! So... Hello !!
I was an HTC protagonist and hated Samsung for their phones made of Taiwanese plastic and their Apple-like designs and commercial strategies... until my employer introduced a new Android application and provided us with new Samsung Galaxy Note 2 devices. Well - let's just say I was amazed on one hand by the speed and capabilities of my new device and disappointed on the other hand by my beloved HTC One X. It's just that - everything works better ! The only annoying bit was the keyboard, which is far less practical than the one on Sense... but that was easily set right with the installation of AI Keyboard and its Gingerbread theme.
So - my phone had just completed its very first charge after I unpacked it when I decided to root it immediately, install CMW6 recovery and flash it with Revolution HD 19.0 - which worked like a charm !
I'm very happy with this ROM ! My battery lasts clearly longer than that of my colleague's stock devices (about 48h with normal use - including a bit of gaming during number 2's, use of Wifi most of the time and Bluetooth in the car). The response is slightly faster too - for instance that app we use for work works just a little bit faster on mine. Same thing for Youtube, Facebook, Despicable Me (cool game :cyclops: ) and so on...
During the flashing it suggests the installation of some apps - well a few of them weren't installed after flashing although I did select them (I remember Maps was not installed for instance... unfortunately I don't remember what else I had to install manually). That means I'm not entirely sure all the tweaks suggested during the flashing were indeed enabled. I couldn't find any Revolution HD specific section in the settings (like you'd have on a Cyanogen ROM) - and couldn't find any app either to test and play with those tweaks. So can someone tell me if there's a way to find/modify those specific options/tweaks ?
What I also can tell is that one of my colleagues, who received the Note 2 the same day as I did, followed me with the rooting and flashing with his device... He seems to have been less lucky than me - he tells me every once in a while, when waking up the phone, he has no reaction when trying to unlock it (he just uses the screen swipe). He has to put it back to sleep and wake it up again before he can unlock it... Is this something that happens to anyone ?
So there you go - my experience is nearly flawless ! I love this ROM and will continue using it !
By the way : does anyone know how updates work with this ROM ? Do I have to backup my apps and data whenever a new Revolution HD ROM comes out for my phone and restore that backup after upgrade ? Or is there some kind of OTA-like update available ?
Click to expand...
Click to collapse
And you had to dig up a year old thread just to tell us about it?
maxld said:
And you had to dig up a year old thread just to tell us about it?
Click to expand...
Click to collapse
Well it was the first thread when searching for Revolution HD on this particular device - for one. And I wasn't allowed replying on the thread from the developer about Revolution HD 19.0.
Had I made a new thread about this, you'd have told me to look up other threads on the same topic before creating a new one...
Anyway, I sincerely apologize if I made your day worse somehow with my irrelevant post in such an old thread... I hope you will forgive me
I've tried accessing the hidden menu via *#*#4636#*#* but when I go to the setting to change radio band it force closes, is there any other way to change it via cmd adb or something? Would like to test the new 1900mhz band ;D
Fixed ROM
https://docs.google.com/file/d/0B9wuQYoYYGrzampEa3poWHAtR0E/edit
Sent from my Nexus 4 using Tapatalk 2
Bump
Sent from my Nexus 4 using Tapatalk 2
Serious_Beans said:
I've tried accessing the hidden menu via *#*#4636#*#* but when I go to the setting to change radio band it force closes, is there any other way to change it via cmd adb or something? Would like to test the new 1900mhz band ;D
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Been trying myself! Don't know where to fix that issue. The Gnex had no problem with that. This one does tho... I live 5 miles from the 1900 tower.
Sent from my Nexus 4 using Tapatalk 2
luckylui said:
Been trying myself! Don't know where to fix that issue. The Gnex had no problem with that. This one does tho... I live 5 miles from the 1900 tower.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
I'm so upset I want to try it.
Sent from my Nexus 4 using Tapatalk 2
Bump.
There has to be a way ... :/
Sent from my Nexus 4 using Tapatalk 2
Are you on the stock ROM? If not, that might be the issue (because of the modifications made to it something could've gone wrong in that specific ROM.) You could also attempt to use Phone Info from the play store if it simply just doesn't work in the dialer. There's not many people that have issues doing this, so it could be that you might just have to reset your phone if all else fails.
doesnt force close on me.
Wolfy9247 said:
Are you on the stock ROM? If not, that might be the issue (because of the modifications made to it something could've gone wrong in that specific ROM.) You could also attempt to use Phone Info from the play store if it simply just doesn't work in the dialer. There's not many people that have issues doing this, so it could be that you might just have to reset your phone if all else fails.
Click to expand...
Click to collapse
This was happening to me on stock ROM/kernel and on two different phones
Basically I just want to know if there is any other method to change it. If not then I'll just wait a random amount of time and try again after a new update comes out
Sent from my Nexus 4 using Tapatalk 2
It force closes on my phone too when in phone info and I try to select radio band
I even downloaded the phone info app n its the same thing
Sent from my Nexus 4 using xda premium
jaestreetss said:
It force closes on my phone too when in phone info and I try to select radio band
I even downloaded the phone info app n its the same thing
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
You running a custom ROM or kernel?
Sent from my Nexus 4 using Tapatalk 2
Wolfy9247 said:
Are you on the stock ROM? If not, that might be the issue (because of the modifications made to it something could've gone wrong in that specific ROM.) You could also attempt to use Phone Info from the play store if it simply just doesn't work in the dialer. There's not many people that have issues doing this, so it could be that you might just have to reset your phone if all else fails.
Click to expand...
Click to collapse
This was happening to me on stock ROM/kernel and on two different phones
Sent from my Nexus 4 using Tapatalk 2
This happens to me too. I'm using stock rooted 4.2.1.
Alright so its just random? Works for some not for others? It can't be software then...hardware problem? Idk >_< I just want better indoor service Lol.
Sent from my Nexus 4 using Tapatalk 2
Serious_Beans said:
Alright so its just random? Works for some not for others? It can't be software then...hardware problem? Idk >_< I just want better indoor service Lol.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
I think it crashes on all phone. It is software problem.
I called tech support and had him tried it on his phone and it crashed too.
which band do you switch it to?
Sent from my Nexus 4
Just Tried it again on CFX SR1 W/ brixked 0.6 and got an FC. I got it stock as well.
But from what ive heard you will not kick into HSPA+ mode until you put a strain on your conection. IE: Idling/web browsing/facebook will not bring you up to HSPA:15 (you can check you HSPA Channel in the settings--->about phone--->Status and then look at mobile Network Type). Knowing that i live in a well covered area i was upset that i couldnt get full 42mbps. But as my research and expereince has shown i can get it, just only when its necessary.
NOW, im not a wireless tech, im not even a rocket scientist, but i have done alot of reasearch and the data matches my hypothesis so ill lay it out for everyone to tear apart.
HSPA+ 42M works by using a Dual Carrier signal, which of course uses a bit more power than a single carrier. So even if you have a perfect -0dbm signal strength, you will only see HSPA:10 [ aka 21mbps ] in your network type. BUT, if you put a load on your connection ( in my case i took a multi hundred meg file into dropbox and then downloaded it) you will see the speeds increase signifigantly past the first little bit of data transfer, and if your are quick about it or cook up some sort of widget or overlay you can see the phone kick up to "high gear" and use the HSPA:15 channel.
i have also seen this in effect with larger apps. For instance the Ingress update that i got earlier today downloaded in these steps: 756k - 1.3Mb - 3.5mb installing. in ~ 10 seconds.
tl;dr Phone idles in low speed mode, goes to high speed when needed.
So if you want to test for yourself and have a bit of data left on your account (in 3 test i burned ~ 250MB) start a big download and then quickly switch to a view of the network type.
Ludacon said:
Just Tried it again on CFX SR1 W/ brixked 0.6 and got an FC. I got it stock as well.
But from what ive heard you will not kick into HSPA+ mode until you put a strain on your conection. IE: Idling/web browsing/facebook will not bring you up to HSPA:15 (you can check you HSPA Channel in the settings--->about phone--->Status and then look at mobile Network Type). Knowing that i live in a well covered area i was upset that i couldnt get full 42mbps. But as my research and expereince has shown i can get it, just only when its necessary.
NOW, im not a wireless tech, im not even a rocket scientist, but i have done alot of reasearch and the data matches my hypothesis so ill lay it out for everyone to tear apart.
HSPA+ 42M works by using a Dual Carrier signal, which of course uses a bit more power than a single carrier. So even if you have a perfect -0dbm signal strength, you will only see HSPA:10 [ aka 21mbps ] in your network type. BUT, if you put a load on your connection ( in my case i took a multi hundred meg file into dropbox and then downloaded it) you will see the speeds increase signifigantly past the first little bit of data transfer, and if your are quick about it or cook up some sort of widget or overlay you can see the phone kick up to "high gear" and use the HSPA:15 channel.
i have also seen this in effect with larger apps. For instance the Ingress update that i got earlier today downloaded in these steps: 756k - 1.3Mb - 3.5mb installing. in ~ 10 seconds.
tl;dr Phone idles in low speed mode, goes to high speed when needed.
So if you want to test for yourself and have a bit of data left on your account (in 3 test i burned ~ 250MB) start a big download and then quickly switch to a view of the network type.
Click to expand...
Click to collapse
In this thread, we are talking about changing TMobile 3G bands: 1700 (current) and 1900(new, refarmed). We are not talking about HSPA, HSPA+, etc.
Mine FC's as well. I'm unlocked and rooted only
Sent from my Nexus 4 using xda premium
Serious_Beans said:
You running a custom ROM or kernel?
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Yes
Sent from my Nexus 4 using xda premium
Well no one has a solution or an actual idea about what the problem is so I guess we will just be waiting x amount of time for a fix. Maybe a ROM dev can look into this and fix the issue because it'd be really nice to use the new 1900mhz bands. Can someone do a log cat and see what the issue is? No laptop ATM.
Sent from my Nexus 4 using Tapatalk 2
I ordered a nexus, but I wanna know, what I can use nfc for?
Sent from my SGH-T959V using xda app-developers app
This is exactly what I was wondering but was afraid to ask in order not to look like a noob
I mean, I know the basics of the technology, but any good use? I mean, I don't care about NFC tags that I have to glue to my desk, because I already have a better way to turn on wifi automatically or do different stuff (i.e. Setting Profiles uses GPS or GSM location to do these things).
I mean - I have Nexus 7 and Note 2, which both have NFC. I saw some demonstrations concerning file trenasfer between phones and what not... But when I put my Note 2 onto N7, I only hear a beep and that's it... what has to be done i.e. to use NFC to transfer something between these 2 devices? Does this work in combo with Wifi direct?
D.
In am not sure if the note 2 uses the normal beam app built into android or not but I know if I put my nexus s or nexus 4 back to back next to my nexus 7 (nexus s to nexus 4) with say the gallery app opened up it will allow me to beam the image selected to the other device...you can also use it for webpages, contacts and other such shareable items.
Sent from my Nexus 7 using Tapatalk HD
Check out this video: https://www.youtube.com/watch?v=qp5il7yhM4Y&feature=youtube_gdata_player
lol number 1 use of nfc
when your looking at ....anything, and wanna show a friend put your devices back to back till you hear the beep, then touch the screen on the device you wanna send from,
i can send pics, youtube video urls, webpage urls, mp3's,videos, etc from nfc connection:good:
krobinso2295 said:
Check out this video: https://www.youtube.com/watch?v=qp5il7yhM4Y&feature=youtube_gdata_player
Click to expand...
Click to collapse
You beat me to it
I like that dude's YouTube channel, so thanks for introducing me to it... Ah, Hackintosh, there's a scene I haven't been to involved with since the early leaks of the developer preview of 10.4.3 way back when... (I'm pretty certain I was amongst the first to get it booted on anything other than the developer platform, lol) NFC though, I've not really had much use for it. Got a few devices which support it, my partner's S2 as well, although trying to get the I9100P's party piece working in an I9100 CM10.1 ROM has been hit and miss. I should grab some tags to use for profile switching and app launching on my Nexuses (Nexii?), it seems like the only thing I'm likely to use it for in the short term, at least.
Nfc is a gimmick. I tried to send a pic to my cousin once using nfc. It wouldn't even send it... It said file was too large... Wtf its like a 25kb pic file... Seriously?
Gimmicks gonna gimmick
Sent from my Nexus 7 using Tapatalk 2
Try this thread, or this thread. The Galaxy Nexus forum has a few similar threads that might give you some ideas, too.
Check out this vid: http://www.youtube.com/watch?v=sN1GFa1DO3k
I like his channel.
Hello All,
Can anybody tell me if there is a way to get a "Verizon Only" app, called Indycar 13, to run on our N4?
As a motor racing fan, I would love to be able to run this app while watching the races, but of course the Play Store says its not compatible.
https://play.google.com/store/apps/...t#?t=W251bGwsMSwxLDEsImNvbS52encuaW5keWNhciJd
Is it really not able to run on our phones? Or is it simply a matter of getting it into our phone.
Thanks for any help.
dcrandon said:
Hello All,
Can anybody tell me if there is a way to get a "Verizon Only" app, called Indycar 13, to run on our N4?
As a motor racing fan, I would love to be able to run this app while watching the races, but of course the Play Store says its not compatible.
https://play.google.com/store/apps/...t#?t=W251bGwsMSwxLDEsImNvbS52encuaW5keWNhciJd
Is it really not able to run on our phones? Or is it simply a matter of getting it into our phone.
Thanks for any help.
Click to expand...
Click to collapse
Why dont u try Market Faker application. You can fake your carrier , if u r desperate about using this app
I'm no expert so please this is just spit balling, but I think market hacker will only allow him to download the app, same as if he simply side loaded the .apk from somewhere. Once in the app it will "detect" for my lack of technical terms, for a Verizon Sig of some sort and and to register it to a corresponding number. I remember way back when warez sites were really out in the open, somebody posting hacked versions of vzw NFL app, where you could watch the red zone channel on Sunday or NFL network any other time...and it would work for a week or two but then vzw would notice the same # being registered hundreds of times and **** it down....I assume this would be similar.
Sent from my Nexus 4 using xda app-developers app
1) Hopefully the hacked app maker was nice enough to include a function to change the fake Verizon #.
2) Find a friend with a Verizon # and use that #.
3) Profit!
I don't think it works that way...pretty sure the app has to be edited with working numbers and what not.
Sent from my Nexus 4 using xda app-developers app
Hello
Little history: I bought my phone yesterday, and i'm shocked with de poor wifi. So I back to the store do change the device, but th saleswoman said I can't change it, because of the contract that I've signed with Claro (Claro is one of the mobile operator in Brazil, and I bought this device through a fidelity plan). So I decide to fix or brick this **** and buy another. Fortunately, I think I was able to fix it and my pocket thanks it.
First of all, let's clarify somethings:
1 - I don't know a **** about developing, so don't blame me with don't work. I'm sharing this solution (that worked for me) because I'm extremely grateful to XDA since of my first day in Android. And to fix this **** that Sony makes (haha!)
2 - As if I say, it's worked for me; My Wifi is detecting more networks now and don't disconnect them. Range is better to.
3 - If I can, I'll help, but I don't know a **** about developing (again!), and I hope that the real developers will come here do help who needs.
4 - I'm in 12.0.A.2.254 firmware (rooted) (BL Locked - I'll unlock it later to teste custom roms; just waiting a feel days because of factory issues)
Ok, let's go
I did it:
1 - root following this tutorial http://forum.xda-developers.com/showthread.php?t=2405933
2 - I downloaded that Rom for Xperia L (I think that is the same wifi devices on both phones) http://forum.xda-developers.com/showthread.php?t=2419042
3 - extract the file 01_____C_n_T_JB_4.1.2_15.0.A.2.17_V1.zip\system\etc\firmware\wlan\prima\WCNSS_qcom_cfg.ini and put in somewhere of easy acess
4 - copy to your phone through root explorer
5 - Reboots
AGAIN: I don't know how to developing; I don't know if it will blow my phone or whatever; I just works here.
Thanks to serajr, for his amazing rom for Xperia L (I had one, but a mother****er stole it. It's a great phone. Better camera than Xperia SP)
thanks to DooMLoRD, for allowing us to root this great device
and thanks to you, that you understand my bad english
***If it posted in wrong section, please move it***
***Sorry if I forget someone in credits, just thanks to all of developers involved in XDA***
Greetings
EDIT: Forget do upload the files. Idiot.
Here: http://d-h.st/ZHW
My Wi-Fi issues had been resolved after the 2.254 firmware update, anyhow's great work, maybe this help people who suffer from poor wifi. ))
upload ini
can you please upload the ini file instead we download the whole zip file.
Wifi Fix?
can anyone confirm if this Fix actually works in extending the range and preventing disconnections?
omair.anwer said:
can you please upload the ini file instead we download the whole zip file.
Click to expand...
Click to collapse
it's in EDIT on my first post, bro
Greetings.
Wow it's amazing! It works perfekt! Before i do this my wifi connection currently interrupted, now it's fast and stable! Thank's bro!!!
Sent from my C5303 using xda app-developers app
well to be true 2.254 firmware update did a little better though with the wifi.. but not as expected.:silly:
Still waiting for perfection or at least to meet the expectation.
This fix seems to be working
Going to give it a try, thanks
Edit: Seems to work!
Please stop using **** in every sentence you write down, it does not make any sense and is not of any use.
works perfectly on C5302_12.0.A.1.284. Thanks for this fix.
Works absolutely awesome even in custom rom. Many many thanks.
Sent from my C5303 using xda app-developers app
Deepam7325 said:
Works absolutely awesome even in custom rom. Many many thanks.
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
Well ok, you convinced me. I will try it out as well later tonight and will post results
At the moment my Galaxy Note II gets 2 bars at 10m distance with 2 walls.
While Xperia SP gets only 1 (or no bars at all) at distance of just 5m and one wall.
Where?
Where exactly should I put this .ini file?
Thank you
Frankly, I don't see any difference. I have the same signal power and the same problems with connection drops as I had before.
gbf360 said:
Where exactly should I put this .ini file?
Thank you
Click to expand...
Click to collapse
HERE: system\et c\firmware\wlan\prima
overwrite the stock file.
c0rtexx said:
Frankly, I don't see any difference. I have the same signal power and the same problems with connection drops as I had before.
Click to expand...
Click to collapse
Well, in order to fix this problem, I searched the web a lot. I found many fix for it, but none of them works. I found a topic that says to overwrite this files and a lot of peoples saying that works, but not for me. So I tried this way and works.
I think it don't work for all devices, Like the lastest update solved the problem of wifi for a some peoples and not for other. Maybe something related to the region and the model of phone (5302/5303/5306/mh35)?
guiips said:
HERE: system\et c\firmware\wlan\prima
overwrite the stock file.
Click to expand...
Click to collapse
after overwriting, have to change permissions to r-w-r-r, otherwise wont work.
Weird, it is (almost) the same ini file as our phone however some lines are missing /diffrent..
Tried all the Wi-Fi fixes and still crappy connection
Sent from my C5303 using XDA Premium 4 mobile app
Deepam7325 said:
after overwriting, have to change permissions to r-w-r-r, otherwise wont work.
Click to expand...
Click to collapse
what do u mean by overwriting... in prima folder we have three files,,,, what to do next??