It's been a while and patiently waiting for Samsung or MS to provide a solution to address this issue but still no luck. After doing some research, connecting the dots and thinking a way around to make this work. I finally was able to.
So I just want to share to the rest of my fellow Omnia7 users who are frustrated with getting the MMS to work 'coz despite the Network profile tool working with some, there are still some like me who couldn't.
Here are the steps I did to finally make it work.
1. If you are on Nodo already, unlocked and still no mms. Just install the SamsungTools from lyriquidperfection found here tick on Set 'Run ADC' Flag and reboot the phone. You don't need to run the Network Profile any more just check if your carrier is the one listed in the mms setting by going to the Diagnosis menu (##634#) then keying in *#9920#
2. If you are on Nodo already, locked and no mms. Unfortunately, you would have to flash to the previous rom before Nodo if you can't successfully make Chevron work. I used this version I8700_XEN_I8700XENJK1 found in this thread. Unlock your phone using Chevron and then installing the SamsungTools. After you have mms working, you can upgrade to NoDo. There's a possibility that you may lose the unlock state, mine still remained unlocked. But you're mms settings will be retained.
I don't know if there's an easier way to get MMS working but this worked for me.
HTH
kieboy said:
It's been a while and patiently waiting for Samsung or MS to provide a solution to address this issue but still no luck. After doing some research, connecting the dots and thinking a way around to make this work. I finally was able to.
So I just want to share to the rest of my fellow Omnia7 users who are frustrated with getting the MMS to work 'coz despite the Network profile tool working with some, there are still some like me who couldn't.
Here are the steps I did to finally make it work.
1. If you are on Nodo already, unlocked and still no mms. Just install the SamsungTools from lyriquidperfection found here tick on Set 'Run ADC' Flag and reboot the phone. You don't need to run the Network Profile any more just check if your carrier is the one listed in the mms setting by going to the Diagnosis menu (##634#) then keying in *#9920#
2. If you are on Nodo already, locked and no mms. Unfortunately, you would have to flash to the previous rom before Nodo if you can't successfully make Chevron work. I used this version I8700_XEN_I8700XENJK1 found in this thread. Unlock your phone using Chevron and then installing the SamsungTools. After you have mms working, you can upgrade to NoDo. There's a possibility that you may lose the unlock state, mine still remained unlocked. But you're mms settings will be retained.
I don't know if there's an easier way to get MMS working but this worked for me.
HTH
Click to expand...
Click to collapse
I did this route, but not for MMS, i had a problem on my Omnia 7 display from tweaking registry. I had to flash to this ROM I8700_XEN_I8700XENJK1 but i really wanted my original branded T-mobile UK rom . Now my phone is dev unlocked and on Nodo, but today i see a branded t-mobile ROM on the main samsung omnia 7 page, so i will flash to Samsung-Omnia-7-Firmware-XXJJ6-ALL-PROVIDERS even if it goes back to firmware 7.0 7004 ..then update to nodo after. Im having one or two issues with XEN_I8700XENJK1 ROM on my Omnia 7 thats why i am flashing again. oh well more loss of apps, settings and tension lol
thanks for the good tips, i will check it out for MMS issues.
Related
So, I got this 6800 from a friend of mine along with a 6700 ( with a very bad battery ), figuring that I am going to develop software for 6.0 I went with the 6800 for the Rom Upgrade. I had the original Qwest Rom on here
Software Version 2.13.656.2
Firmware Version 1.39.00
I went ahead and followed the Ryan Mogul Cricket flash info ( yes i plan to flash this to cricket also ) however sadly before I installed his cricket ROM, i went ahead and followed the instructions for the NUERom2_5049 and after the flash ( done via laptop/activesync connection ), the phone seemed to be bricked. I tried every trick in the book from using the 1G MicroSD card that I have with the ROm on it ( considering the 4G wouldnt work at all ), and couldnt get anywhere.
I also tried flashing Sprint/Alltel/VZW Roms without success, I finally came across the Stock Rom ( Upgrade ) frm Qwest, ran it from Laptop, worked like a charm.
OK now for the questions... Here is some quick info about the new rom. It is Software Version 3.35.656.2, and the Firmware Version is 3.37.20 . At this point I am considering a couple of options.
1. leave the working rom on here and just play with the registry, settings, software, etc.. to get my goal accomplished.
2. Flash this thing over to Ryans Cricket Rom for Mogul ( Hey Ryan if you read this... Is that compatible with the Qwest Mogul?) and go ahead and start the service.
3. Custom Rom, and find a way to get the Cricket info in there.
Also I am using PRL1039 from CK right now, working like a charm so far, I am also wondering if this unit will work on cricket as is if I change some settings.
Just a few things im trying to figure out right now. Along with the ability to get the device to become a Portable Hotspot/ Wireless Adapter ( I now finally have this working as an internet connection....Laptop to PPC via USB Cable, PPC to Netgear Router via WiFi, and im online! Thanks a bunch for anyone with any suggestions, I look forward to seeing what I can do with this device. Also I have the SPL 1040, should I chance it for Cricket?
Thanks in advance!
First thing you want to do is re-do your PST settings to Cricket as the stock ROM changed all of that. Including unlocking your MSL/SPC code to all zeroes and loading a Cricket PRL on there. Follow my Cricket PST settings thread for that. Then you want to remove your memory card and boot up your current ROM into windows mobile and connect to active sync. Make sure its connected you should be able to access the files on the device through your computer and sync icon in taskbar will be green.
Now flash the unlocked bootloader Olipro2.40 exe. You can find that in my htc unlock tools directory on my share site, link provided in my PST settings thread.
After that is all said and done you can flash any Custom ROM including mine. If you use my Cricket ROMs all you have to do is activate the data connection and enter your [email protected], password cricket, blank domain, check save password. Done.
If you use someone elses NON cricket ROM you can always use my Cricket WAP or WAP and Arcsoft CABs to set up the Cricket information for you. Hope this helps.
already redid the spl stuff, still cant seem to get the msl back to 000000 but i do have the correct one. Just got the unit working as a wireless adapter so thats a plus, i need to get this thing over to cricket next, so I can get my account set back up. right now using Skype for phone service sicne I have WiFi. I will try your rom again, Ryan , as soon as I get things going with this again. Thanks for the tips, they seem to be coming in very handy ( been googling your posts for help with this device ) I know the 6700 inside and out but the 6800 seems to be a new dog right now, been playign with it for a while, got alot figured out, but still more to learn. Thanks again
ok just to update a bit, ive made a few slight changes, got a few new accessories, and tweaked out a few settings, however, all this and i still havent gotten the MSL back to 000000. Any ideas at all, tutorials, walkthroughs, hits, tips, tricks, or otherwise step-by-step directions so i can get that back to 000000 insead of the 6 digit code it is now, then maybe *2/228 will work and i can actually use the data features. Thanks in advance.
I only post this here for those interested who may not pay attention to the general Win Phone 7 section. It is a link to the steps I took to get from dev unlocked nodo 7390 to mango 7166 keeping my dev. unlock:
http://forum.xda-developers.com/showpost.php?p=15386126&postcount=3
Good luck and enjoy mango responsibly!
I don't know if anyone post this but I had the same problem with the internet and th MMS they where not working. There IS NO NEED TO RESET OR TO CALL AT&T FOR UNLOCK CODE.....
SIMPLY HAVE INSTALLED SAMSUNG TOOLS (BY GAZZ) FROM NODO WHEN YOU DO THE UPGRADE.....
http://forum.xda-developers.com/showthread.php?t=924497&page=9
AFTER YOU MODIFY THE UNLOCK WITH *#9908# SIMPLY GO TO THE SAMSUNG TOOLS AND CHECK ALL THE BOXES AND APPLY IT WILL REBOOT AND VUALAAAAAA YOUR FOCUS NOW HAVE INTERNET AND MMS AGAIN.....
RUNNING MANGO FROM MY FOCUS
I follow your instruction, however my phone is re-locked after install mango
nodo: unlocked
pre-mango: unlocked
mango: locked
I tried to go back nodo, then did the whole process 3 time, but no luck. I also tried to update mango by a different way, got mango but also re-locked my phone.
----------------
NVM, deleted the diagnosis app, then dial ##634# again, everything works
After spending long nights of investigations, I here present the solution for those LG Quantum users like who want to get onto Rogers Canada Network.
So far I have done 2 LG Quantums and all works fine for both data and MMS.
Here are the steps:
1. Download the attached LGC900KB_100927_MP.zip and extract it somewhere. You will get LGC900KB_100927_MP.dll.
2. Goto nasirahmed's post regarding LG Quantum's original firmware thread. (Great job, nasirahmed!)
http://forum.xda-developers.com/showthread.php?t=935605
Download the LG C900K Australia version firmware and of course "LGDP2 V36 UMTS Setup" tool.
3. Follow the steps in nasirahmed's instructions to flash the LGC900K firmware. When you are asked for "DLL Selection", pick the one you have just extracted.
4. If everything goes well, you should have the C900K firmware pre-nodo version.
5. Start Zune and let it upgrade your firmware all the way to Mango. Be patient, it's a long process (about 1 hour).
6. Now you should have C900K mango on your phone, go to dialer and dial ##634# to install the MFG tool.
7. Disconnect USB and connect Wifi. Goto MarketPlace and download LG's Network Setup(In the LG App Store section).
8. Start the Network Setup tool it'll say something like "setttings changed, has to reboot". Let it reboot.
9. Then start MFG tool, password "277634#*#", "Engineering" -> "Other Options" -> Pick Registry editor.
Change the following key to 0.
LM_LOCAL_MACHINE\Software\LGE\DYNPROV\XMLList
Key = "RGS_CA_302_720"
Type = DWORD
10. Exit the MFG tool. Then run Network Setup again, it will reboot again.
11. Now you should have the Roger's Profile everything set up including the MMS.
12. Enjoy!
p.s.
The reason why it has to be C900K:
Only the C900K has the required the application lge_dynprovapp.exe to do dynamic provisioning. The Bell and AT&T ones doesn't include the file in \windows.
The reason for my DLL:
The original DLL for C900B or C900 or C900K will not let you do cross model flash. My version will let you flash across C900-C900B-C900K.
thanks, I'm thinking this might also be useful in the future if the at&t or the telstra versions get the tethering update but bell doesn't.
Thanks a lot for this! Flashing between C900/B/K with provided .DLL and LGDP2 V36 UMTS Setup tool works smootly!
Unfortunately flashing to different firmware didn't fix my issue. C900 is not accepting SIM, but repeatedly prompt for PUK code. I'm almost ready give my money for Octopus or similar tool, after trying unlock codes and flashing with different firmwares...
This worked great for me once I figured out the nuances to Nasirahmed's instructions but there are a couple of areas that I got stuck on.
Here are Nasirahmed's instructions from http://forum.xda-developers.com/showthread.php?t=935605 with some notes in red so you don't waste time uninstalling and reinstalling drivers and software like I did trying to get this to work:
1. Download LGDP2 V36 UMTS Setup and extract, go to LGDP2_31_INCLUDE_LGDP1_Setup folder and install the exe (use serial number). Now copy all the files from DOWNLOAD folder and paste on C:\DOWNLOAD (overwrite if needed).
2. Install LG United Modem Driver, connect the phone to PC through USB cable and let the drivers to be installed. USB 1.1 is recommended. (note: phone has to be in Emergency Download mode at this point to get the drivers to install.. power off phone, then press Volume Down, Camera, and Power Button at the same time to get in Emergency Download mode.)
3. You'll need firmware in DZ format and the correct DLL for your model.
(note: Unplug phone from USB)
4. Open LGDP2_V36_UMTS from C:\DOWNLOAD, select UMTS in Division and click OK.
5. Select port (check Device Manager for LG USBModem Port number), you can set a range from easy select or select manually. Select DLL and select firmware in Downlaod Configuration. Click OK. (note: You need your phone plugged into USB in Emergecy Download mode to find the port number in Device Manager... otherwise, just click ALL under easy select. Also, don't worry about the "Can't find Monitor Port!" warning )
6. Click START in main window and connect the phone to USB cable in Emergency download mode(VOL+CAM+PWR). (note: Make sure phone is not plugged into USB before you click start, then plug it back in AFTER after you click start. The update will then start automatically and is finished after the phone reboots into Windows.)
Hi,
I live in INDIA, currently i have a AT & T unlocked LG Quantum ?
I am interested in trying the above flashing ?
By what way, it will help me. ?
Is there any advantage in flashing c900 K version over c900 ?
Please let me know.
yakaaithiri said:
Hi,
I live in INDIA, currently i have a AT & T unlocked LG Quantum ?
I am interested in trying the above flashing ?
By what way, it will help me. ?
Is there any advantage in flashing c900 K version over c900 ?
Please let me know.
Click to expand...
Click to collapse
Not sure if this will help you much.
As far as i remember, most of the indian provider's profiles are already in the stock rom. You just need MFG app to set the correct one.
Sent from my LG-P990hN using xda premium
chinabull, using the 900k firmware, what radio and firmware version do you end up with after all the mango and post mango updates?
LG setup tool??
I have an unlocked quantum and have followed along with no problems untill I need to get the LG network setup tool. I can't find it or access it anywhere. I tried marketplace after i did the firmware update to the australia rom. I found a place to get the tool .xap file but cant get it onto the phone. Anyone can help?
Oh and I'm in Canada trying to get the quantum on Rogers.
did you folks on the flashed telstra ROM get the wifi tethering update notice too?
edit, flashed the ROM myself, yes, you do get the tethering update.
Does this flashing to Australian ROM solves the problem of Caller ID on rogers network for LG quantum?
Caller ID is more important for me than the MMS, i only want to do this if it fixes caller id.
Thanks
bobzero said:
did you folks on the flashed telstra ROM get the wifi tethering update notice too?
edit, flashed the ROM myself, yes, you do get the tethering update.
Click to expand...
Click to collapse
Might be a reasonable way to get the wifi tethering update. I just got a reply back from LG Canada saying:
"Unfortunately we have been told that the phone will not support tethering and this cannot be added through an update."
I guess LG Canada figures the quantum can't get wifi tethering?
M_SK said:
Does this flashing to Australian ROM solves the problem of Caller ID on rogers network for LG quantum?
Caller ID is more important for me than the MMS, i only want to do this if it fixes caller id.
Thanks
Click to expand...
Click to collapse
Would also like to know this. Does the Telstra ROM fix the caller ID issue on the Fido/Rogers network?
I personally don't use this specific phone regularly.
I did it purely because I promised my friends to help them to fix the MMS issue.
Just talked to them and they did mentioned about the caller id sometimes works and sometimes doesn't.
If you are talking about similar issue, then probably no.
chinabull said:
After spending long nights of investigations, I here present the solution for those LG Quantum users like who want to get onto Rogers Canada Network.
So far I have done 2 LG Quantums and all works fine for both data and MMS.
Here are the steps:
1. Download the attached LGC900KB_100927_MP.zip and extract it somewhere. You will get LGC900KB_100927_MP.dll.
2. Goto nasirahmed's post regarding LG Quantum's original firmware thread. (Great job, nasirahmed!)
http://forum.xda-developers.com/showthread.php?t=935605
Download the LG C900K Australia version firmware and of course "LGDP2 V36 UMTS Setup" tool.
3. Follow the steps in nasirahmed's instructions to flash the LGC900K firmware. When you are asked for "DLL Selection", pick the one you have just extracted.
4. If everything goes well, you should have the C900K firmware pre-nodo version.
5. Start Zune and let it upgrade your firmware all the way to Mango. Be patient, it's a long process (about 1 hour).
6. Now you should have C900K mango on your phone, go to dialer and dial ##634# to install the MFG tool.
7. Disconnect USB and connect Wifi. Goto MarketPlace and download LG's Network Setup(In the LG App Store section).
8. Start the Network Setup tool it'll say something like "setttings changed, has to reboot". Let it reboot.
9. Then start MFG tool, password "277634#*#", "Engineering" -> "Other Options" -> Pick Registry editor.
Change the following key to 0.
LM_LOCAL_MACHINE\Software\LGE\DYNPROV\XMLList
Key = "RGS_CA_302_720"
Type = DWORD
10. Exit the MFG tool. Then run Network Setup again, it will reboot again.
11. Now you should have the Roger's Profile everything set up including the MMS.
12. Enjoy!
p.s.
The reason why it has to be C900K:
Only the C900K has the required the application lge_dynprovapp.exe to do dynamic provisioning. The Bell and AT&T ones doesn't include the file in \windows.
The reason for my DLL:
The original DLL for C900B or C900 or C900K will not let you do cross model flash. My version will let you flash across C900-C900B-C900K.
Click to expand...
Click to collapse
Hi can you make a DLL that will allow us to flash the Optimus 7 rom to our quantum. They both share the same hardware spec.
yakaaithiri said:
Hi can you make a DLL that will allow us to flash the Optimus 7 rom to our quantum. They both share the same hardware spec.
Click to expand...
Click to collapse
I'd be really wary of doing this, there are some differences 1) capactive vs physical windows button, 2) hardware keyboard.
I agree. If you want to flash different variant of firmware on your optimus 7, i can probably help.
Sent from my LG-P990 using xda premium
Hi bobzero, chinabull, and other Canadian Quantum users. I guess we all got the phone on Bell firesale. I unlocked it and moved to Speakout (Rogers) network now, but since I can't update all APN settings maps are not working. I'm not sure if you have similar problem. They load over home wireless but not when I'm using Speakout data.
My understanding is that here mentioned procedure would solve MMS issue so I was wondering would this help with maps issue too?
Issue is that I can't change all APN proxy values. I unlocked and moved one Android phone to Speakout recenty but since I had control over all APN settings maps are working great.
If this update doesn't help with maps is there any other way to update APN settings?
Edit: To clarify, when I open MFG I don't have any xml file to chose from under network configurations.
Thanks
CHINABULL, with the Telstra ROM, do you happen to know if text messages are received with the wrong time stamp as they are with the bell ROM ? thank you
chinabull said:
I agree. If you want to flash different variant of firmware on your optimus 7, i can probably help.
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
hi Chinabull,
Just a question out of curiosity, is there a chance to flash a Optimus 7 Jil Sanders ROM to our Quantum.?
Can you make a DLL for the same ?
Yes, just confirmed the Time stamp issue is still there. But it seems it doesn't affect threading.
Sent from my LG-C900k using XDA Windows Phone 7 App
I'm rocking my focus, which hasn't been unlocked since mango 7720. I used chevron unlock to get nodo and played around with some tones in the registry. So the only changes I made to get nodo was change the registry carrier from ATT to blank. Had to use the Hungary and disconnect trick for nodo, but have gotten every update since. (cheated for mango too, but that, obviously was impatience)
So my question is, is it worth it to download this one, as I see a lot of people are having data and other issues with it...
Sent from my SGH-i917 using XDA Windows Phone 7 App
ATT Focus
I have no confidence in ATT so I upgraded first to 7740, then 8107 using the cab sender method. Everything works fine. Still Chevron WP7 token and interop unlocked, and all of my registry edits are intact. The upgrade went easily, was recognized by Zune, and the backup was also recognized. Hope this helps. No data issues or any other issues. Most issues people have using the cab sender method had to do with misunderstanding what language packs needed to be installed.
That's what I did. Changed ATT-US to Rog-CA, and upraded to 7740. Then changed back to ATT and used the CabSender method to get to 8107. All is working fine.
I did the software unlock via the dial code & UMTS menu, I can make phone calls with a different carrier sim, but I cannot get the data to connect. I have been searching xda and google for months trying to get this to work. I have a Canadian Bell mobilty i337m. Stock rom (mdj) and its rooted. I have tried factory reset several times but it doesnt fix it. I also tried flashing back to stock with odin. Does anyone have any other ideas?
When I try a telus (or other provider) sim, it give me voice service only and in the about > status menu the mobile network state either says disconnected or connecting. I have the data toggle on also.
Those unlocks don't work that well with the Canadian variants. They're designed for the i337 not the i337m.
Have you made sure the apn is set up right for the carrier?
Maybe this will help
Code:
http://apn-settings.com/canada/apn-settings-bell-mobility/
I will say the reason that cause the problem is that this is an ATT phone with At stock ROM. So it doesn't have the APN setting for other carries. You should set that by yourself.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ve6ay said:
Those unlocks don't work that well with the Canadian variants. They're designed for the i337 not the i337m.
Click to expand...
Click to collapse
ksj0823 said:
I will say the reason that cause the problem is that this is an ATT phone with At stock ROM. So it doesn't have the APN setting for other carries. You should set that by yourself.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Not true. I successfully unlocked my first S4 I337M on Bell following this tutorial. I sold that one because I was able to make a profit once I unlocked and flashed the AWS mod to make it compatible with WIND and Mobilicity.
simplywinter said:
I did the software unlock via the dial code & UMTS menu, I can make phone calls with a different carrier sim, but I cannot get the data to connect. I have been searching xda and google for months trying to get this to work. I have a Canadian Bell mobilty i337m. Stock rom (mdj) and its rooted. I have tried factory reset several times but it doesnt fix it. I also tried flashing back to stock with odin. Does anyone have any other ideas?
When I try a telus (or other provider) sim, it give me voice service only and in the about > status menu the mobile network state either says disconnected or connecting. I have the data toggle on also.
Click to expand...
Click to collapse
Try reflashing the original 4.2.2 firmware from here and then immediately follow this tutorial before rooting (do not install any system updates!). Then you can root, install custom recovery, reset the flash count, etc.
All questions and help issues go in Q&A and Help section
Thread moved
Thanks
FNM
MrKhozam said:
Not true. I successfully unlocked my first S4 I337M on Bell following this tutorial. I sold that one because I was able to make a profit once I unlocked and flashed the AWS mod to make it compatible with WIND and Mobilicity.
Try reflashing the original 4.2.2 firmware from here and then immediately follow this tutorial before rooting (do not install any system updates!). Then you can root, install custom recovery, reset the flash count, etc.
Click to expand...
Click to collapse
You did exactly what I am in the process of doing. I will try what you suggested now. Thanks!
Also, ive manually inputed apns for telus and eastlink and neither seem to work. I can always make voice calls, but the data will not connect.
ksj0823 said:
I will say the reason that cause the problem is that this is an ATT phone with At stock ROM. So it doesn't have the APN setting for other carries. You should set that by yourself.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
oddly enough, when I put a telus sim in it and waited for a while (in hopes it would eventually connect to data) and the apn settings for telus were in the phone. I know I didnt put them there because the apn settings for koodo were also present along with a third apn that I cant remember.
For future reference, try not to double post. Just edit your current post.
simplywinter said:
oddly enough, when I put a telus sim in it and waited for a while (in hopes it would eventually connect to data) and the apn settings for telus were in the phone. I know I didnt put them there because the apn settings for koodo were also present along with a third apn that I cant remember.
Click to expand...
Click to collapse
It's actually not an odd thing to happen. Once an activated SIM is inserted and the phone is unlocked, the phone searches for the best APN settings from all compatible carrier bundles. Some phones do this more accurately than others. However, it may not do this well enough if a custom ROM is installed. I know this to be true because this happened with my older Galaxy S3 when I tried selling it to someone (it was a T-Mobile unlocked running CM 10.0 at the time). However, setting the APN manually (assuming all settings are correct and that nothing else is wrong with the phone) should resolve your issues.
If you're still having problems, I suggest doing these things:
1. Try going into your network operators and let the phone search for carriers nearby. Once the list shows up, tap on Telus and wait until that screen closes on its own.
2. If you can't get data going yet, try disabling it, re-enabling, and reboot.
3. If this still doesn't work, try going into the network mode screen and select GSM/LTE and reboot.
4. If it's still derping on you, then it must either be your SIM not connecting to Telus's data network, or your account has a data block. That's all I can really think of.
Good luck.
MrKhozam said:
For future reference, try not to double post. Just edit your current post.
It's actually not an odd thing to happen. Once an activated SIM is inserted and the phone is unlocked, the phone searches for the best APN settings from all compatible carrier bundles. Some phones do this more accurately than others. However, it may not do this well enough if a custom ROM is installed. I know this to be true because this happened with my older Galaxy S3 when I tried selling it to someone (it was a T-Mobile unlocked running CM 10.0 at the time). However, setting the APN manually (assuming all settings are correct and that nothing else is wrong with the phone) should resolve your issues.
If you're still having problems, I suggest doing these things:
1. Try going into your network operators and let the phone search for carriers nearby. Once the list shows up, tap on Telus and wait until that screen closes on its own.
2. If you can't get data going yet, try disabling it, re-enabling, and reboot.
3. If this still doesn't work, try going into the network mode screen and select GSM/LTE and reboot.
4. If it's still derping on you, then it must either be your SIM not connecting to Telus's data network, or your account has a data block. That's all I can really think of.
Good luck.
Click to expand...
Click to collapse
Ok, reflashed stock 4.2.2 (the first one) and manually entered TELUS apn settings from the telus website, got data to connect finally. As a note, there was a typo in the apn settings that it auto aquired for telus. Going to try a eastlink sim tomorrow and hopefully AWS is working.
Edit: all seems to work. thanks everyone!!