[Q] [CM7] "Problem Loading Widget" (NOT on SDCard) - Nook Color Q&A, Help & Troubleshooting

Well, i'm a noob to this forum, and to doing ANY rooting/flashing. There, thats out in the open XD
Heres the specs:
CM7 7.0.3 Stable
Nook Color (Blue Dot)
ADW Launcher
Onto the issue! I have searched ENDLESSLY for a solution to this, but have come up short. Nearly everytime I power off/on or reboot the Nook, all my widgets show "Problem Loading Widget". The ONLY way to get them running again is deleting and replacing them again on the screen.
Let me explain some things I have done and hopefully we can figure this out. I am assuming, that it may be due to me performing this - http://forum.xda-developers.com/showthread.php?t=1034939. Basically what that does is take the unused eMMC from the NC and tag it as the SDCard. The reason for doing that is because I don't have any ACTUAL decent sized SD cards and figured why not use the 5GB thats avail and unused on the Nook, and "simulate" it as being a 5GB SD card for apps and whatever else.
Nearly every post I have read says it has to do with having the apps for the widgets on the SD Card. Well, they're not, they're on internal memory. AND, if I do move them to my "simulated" SD Card, they don't even come up in the widget list, so that clears that option.
Also, since I had a Blue Dot Nook, I performed this - http://forum.xda-developers.com/showthread.php?t=1094371 and partitioned to the old style NC.
I have tried and tried to find out where the apps, if stored "internally", actually are. I cannot for the life of me find them, other than the default Google Apps in /system/app, as well as the ones I have downloaded on the "simulated" SD card under /mnt/asec & /mnt/sdcard/android.secure.
Also, when I plug the NC into my PC, I see whatever is on my "simulated" 5GB SD card (which is really the eMMC of the device). Is it possible to view the root of the device at all to see ALL the files/folders on it?
If someone can solve this, I will be eternally grateful, in a totally non gay way atleast. THANKS!

Hey there....
I'm new to the NookColor and rooting/flashing Android devices, too (though, I did run Linux on my Palm Tungsten T3, back in the day). I probably only partially understand your woes, but it seems to me that your problem stems from the faking microSD thing. Maybe it's not so much that Android wants to put something in the SD, as much as it's confused, when it probes for orthodoxy. I understand the want to use the internal memory, instead of buying a mSD, honestly.
Again, I'm totally new to this, but reading your post and many other posts in the last 48 hours, I think I might have a valid solution: start over. If I were you, I'd do the following, which, incidentally, is very much what I'm in the process of doing, too. I'm starting from "blue dot" scratch with two mSD's (2GB & 8GB) in-hand, though. By the way, and if it's any help to you, I bought my Class 4 SanDisk 8GB mSD at Office Depot yesterday for around $15 (on sale?).
1. Buy a microSD card.
2. Image the card with ClockworkMod.
3. Install TitaniumBackup Free.
4. Backup all of your apps/stuff to the microSD card with TitaniumBackup.
5. Save an image of your current setup with ClockworkMod (booting from mSD, backing up to mSD)
6. Repartition to the old (pre-"blue-dot") scheme, again, using the first mrm3.net link below as a guide.
7. Install the latest CM7 Nightly for "encore"...
8. Save an image of your current setup with ClockworkMod (booting from mSD, backing up to mSD)
9. Install TitaniumBackup Free.
10. Restore all of your apps to the microSD card with TitaniumBackup.
(Of course, I'm assuming a lot of things... I guess I'm just thinking aloud... Maybe some of this is of some use to you. Good luck!)
-v
p.s.... I had a few links I was going to share, but I'm not allowed to share external links until after my 8th post (and I understand why that's a rule)... lol..
There seems to be plenty of threads about these things around here. I just don't have them right now..

Thank you vulariter! It'd be great if when you finish getting everything set up, letting me know how it works out for you. I know people have been having some pretty weird things happening with the blue dot Nooks. Appreciate the info.

I"m happy to report that my internal CM7 Nightly install went well. I chose to go with a 2 GB apps / 4 GB media internal partitioning scheme. I like breathing room, on both sides..lol.. I also like doing things the difficult way, sometimes.. (just being honest)...
Minus the unnecessary convolution of my rooting the stock OS, 50+ complex character WPA2 key, static IP WIFI network, and email address fiasco, here's basically what I did. Again, I'd love to share the external links, but I don't think it will let me do so.
Oh, and always check MD5 sums on the files you download, wherever possible. Corruption in these files will surely eat your Nook alive, at least a little. lol.. Yes, be very scared of that.
Also, don't forget to backup your ClockworkMod backups to a better medium than the microSD card. I used 7zip to archive them on my laptop's internal drive. A cloud backup of them would probably be better (e.g. Dropbox). Just remember, you're putting potentially personal info out there, wherever you put these backups.
Thanks to all the people who figured this stuff out (see the links / websites below, to give them credit).
Bought a NookColor at my local B&N. (I later read about the "blue dot" thing and realized mine had the "blue dot" on the back of the box.)
SIDE NOTE: My understanding is that the "blue dot" signifies only a few important things. 1. a 5 GB apps / 1 GB media partitioning scheme... 2. U-Boot 1.2, with the "Read Forever" logo..... 3. Maybe an unlocking of a few more cylinders (about 250 MB)??? I've only read a little on this..... 4. Maybe a different chip revision or two, inside.
Bought a SanDisk Class 4 (class 6 would have been better) 8GB microSD card.
Located my microSD to SD adapter, which is a priceless item to me.
Located my USB many-in-one card reader, because my Lenovo R61's internal SD reader is unstable.
Located my 2GB class ? microSD card, which I once used in my old LG env2.
Connected my USB card reader to my laptop.
Inserted the 2GB mSD into my USB card reader.
Copied all of my old music, etc, on my 2GB microSD to a directory on my laptop for posterity.
Downloaded the latest version of Win32DiskImager. (Link 1)
Downloaded the latest version of ClockworkMod 2GB SD image. (Link 1)
Imaged my 2GB mSD with the ClockworkMod image.
Created "clockworkmod" and "clockworkmod\backup" directories, inside of the 2 GB mSD (whose disk label is now "boot").
Downloaded the "Custom: 2GB for Apps and 4GB for Media" partitioning file from mrm3.net and placed it in the root directory of my 2 GB mSD.
Downloaded the "Mandatory Data Format File" from mrm3.net and placed it in the root directory of my 2 GB mSD.
Downloaded the latest CM7 "encore" Nightly from cyanogenmod.com and placed it in the root directory of my 2 GB mSD.
Downloaded the latest "encore" Gapps from mrm3.net and placed it in the root directory of my 2 GB mSD.
Confirmed my Gmail and Youtube accounts were linked. This is also the same address which I'm using for my B&N account.
SIDE NOTE: I had to change my B&N account's non-Gmail email address to align my email addresses. I think this may have caused a problem with my obtained-at-Nook-purchase B&N Membership Card, because it no longer works... (I've contacted them about it...and their answer is unsatisfactory. Beware!)
Unboxed my NookColor and began charging it, via the wall plug.
Booted my stock NookColor, signed into my WIFI network and registered my device to my Gmail email address.
Played around with the stock OS and Nook apps, because I'll probably never ever see them again.. The Crossword game was awesome! I didn't allow myself to become attached to their reading apps, to be honest..lol.. (I would have probably been attached, had I not been proactive in my "hacking".)
Powered off my NookColor.
Inserted the 2 GB mSD into my NookColor.
Booted my NookColor into ClockworkMod.
Saved a backup of the stock system to the "backup" directory I created earlier.
Followed the instructions at mrm3.net to repartition my NookColor (rebooting, as directed).
Removed the 2 GB mSD card.
Rebooted again, allowing the Nook to recover from the repartitioning. I did not reregister the device in this step. I just waited for the woman's face to appear and shut it down.
Inserted the 2 GB mSD card.
Booted my NookColor into ClockworkMod.
Saved a backup of the NEWLY PARTITIONED stock system to the "backup" directory I created earlier.
I followed the mrm3.net CM7 Nook Nightlies instructions, but I'll paraphrase here. (Definitely seek this article out, and don't take my word for it.)
Still in ClockworkMod, I reformatted the "data", "system",and "cache"partitions.
Used "install from zip" to install "cm_encore_full-xx.zip"
Used "install from zip" to install "Nook_Color_Google_Apps.zip"
This may be a good time to obtain another backup, if you're paranoid. I did not and wasn't...
Removed the 2 GB mSD card.
Rebooted again, allowing CM7 to do its thing.
Signed into my WIFI network, using the menus.
Signed into the Google Market, selecting all of the Gapps, when prompted. (I figure I can uninstall them, if I find them totally useless.) (e.g. Facebook
app, since I quit it..lol)
Inserted my 8 GB mSD card in the NookColor for the first time and formatted it, from within CM7. I could have made a Win32DiskImage image of the 2 GB ClockworkMod mSD, wiped it out and formatted it for general use, but I like having my own data (media files / apps) separate from my "live recovery environment(s)." Point being, I could have gotten by with just a single mSD card, as tiny as 2 GB and the cheapest class, but I splurged, because I want to keep some music and things on tap, wherever I go.
Rejoiced in the open source goodness.
This would another good time to obtain another backup. I should go do that right now..
Please keep in mind that I might be taking some things for granted. My mind has been altered by being a *NIX System Administrator...
Good luck and let me know if you have any questions.
-v

Great stuff V! So this is what I have decided to do. I will keep my current system until the next stable version of CM is released. Once that happens, i'll go ahead and repartition, reformat, and of course reinstall following all of the proper procedures that i'm too lazy to write out here.
The only other issue I was having with my Nook is that it wasnt recognizing when an SD card was plugged in. I thought it may have been CM7, so I flashed back to the stock OS, and it still wouldnt recognize it plugged in. However, if I have the SD card plugged in, and reboot, it shows the SD card mounted fine. I need to do a check to make sure I can read/write to it, but i'm assuming it will be no problem if it sees it fine. If I were to remove the card, it would not say that the card is unplugged, so theres no instant feedback; it requires a reboot every time to notice if the card is plugged in or not. For me, all I need is it to be recognized and be accessible, as its not like I am going to be taking it out all the time, it will be in there pretty much for good.

Related

[Q] Noob question: How to boot from SD?

I tried to create a CM7 bootable SD card per the thread entitled "Size-agnostic SD Card image and CM7 installer for SD Cards. with updater."
I used WinImage to create the supposedly bootable SD card with the installer, placed it into my Nook which was fully off, and the Nook booted as usual instead of from the SD card.
Am I missing something? How do you boot from an SD card?
Is there such a thing as a boot choice menu like on my PC or is the default always to boot from the SD card?
Does the Nook have to be rooted for this to work?
Thanks
ETA: My PC shows the uSD card as nearly full, but my Nook shows the SD card as nearly empty (1.74 out of 1.84 GB available).
When you bought your Nook, did it have a blue sticker on the box? And does internal storage show 1GB or 5GB for you?
Also, you did drop an update CM7 zip file onto the imaged uSD before you tried booting off it right?
angomy said:
When you bought your Nook, did it have a blue sticker on the box? And does internal storage show 1GB or 5GB for you?
Also, you did drop an update CM7 zip file onto the imaged uSD before you tried booting off it right?
Click to expand...
Click to collapse
No blue sticker was on the box. The internal storage shows 5GB.
Yes, I had a CM7 zip file on the imaged card. (The latest encore nightly)
Interestingly, my PC shows the uSD (2 GB) as nearly full. The Nook shows it as nearly empty (1.74 out of 1.84 available).
JowBe said:
No blue sticker was on the box. The internal storage shows 5GB.
Yes, I had a CM7 zip file on the imaged card. (The latest encore nightly)
Interestingly, my PC shows the uSD (2 GB) as nearly full. The Nook shows it as nearly empty (1.74 out of 1.84 available).
Click to expand...
Click to collapse
When you burned the installer img, did you run WinImage as administrator? Also, when you put it in your reader it comes up as boot (drive letter in Windows, with files like uImage, uRamdisk, mlo, u-boot.bin, right?
angomy said:
When you burned the installer img, did you run WinImage as administrator? Also, when you put it in your reader it comes up as boot (drive letter in Windows, with files like uImage, uRamdisk, mlo, u-boot.bin, right?
Click to expand...
Click to collapse
Yes, I ran WinImage as administrator. And yes, it shows up in Windows explorer as boot and yes those files are there.
Could it be because my Nook operates in "factory mode," in order to skip initial registration?
You should run it and register it and setup wifi and everything first. Get the stock software working fine and dandy (its not half bad actually). Then, checkout this guide for installing CM7 onto an SD card:
http://clubnook.com/forum/showthread.php?953-Rooting-Instructions
It has worked for some rooting rookies so far and includes both windows and mac guides specific to SD cards.
JowBe said:
Could it be because my Nook operates in "factory mode," in order to skip initial registration?
Click to expand...
Click to collapse
I'm not sure, because I ran through initial registration on stock prior to running CM7 off SD --- I used the same image (verygreen's agnostic at http://forum.xda-developers.com/showthread.php?t=1000957) as you did without a hitch.
If you decide to run CM7 off internal sometime you're going to need to register the nook anyway.
You could try an alternate bootable SD (e.g., using an image from here: http://forum.xda-developers.com/showpost.php?p=13283643&postcount=34) to eliminate one of the two: a) your nook having issues booting from SD or b) your SD install is not set up correctly.
An update: I decided to try to create a bootable SD from another bootable image (MonsterRootPack with CWR). This time the nook wouldn't even turn on. I'm going to try to create a third bootable SD as angomy has suggested to see what happens.
I need to add that when I removed the uSD card, it booted normally.
Also, when I create the bootable SD with winimage, I get a dialog box that tells me that the format of the SD card is not right and asks me if I want to resize the image. But this happened on both the images. I don't know if this has anything to do with it.
angomy said:
You could try an alternate bootable SD (e.g., using an image from here: http://forum.xda-developers.com/showpost.php?p=13283643&postcount=34) to eliminate one of the two: a) your nook having issues booting from SD or b) your SD install is not set up correctly.
Click to expand...
Click to collapse
Ok, I tried the CWR image in the link you gave. Same problem - no-go. Just sits there dead. I remove the uSD and it boots normally.
FWIW you do not have to boot into stock B&N at all before you setup and install to CM7 SD card. One of my NCs has never ever booted into stock ROM at all, I installed CM7 onto SD card and running off that from the moment it was unboxed.
The NC will always boot off the SD card first, so if it's booting off eMMC instead then there must be something wrong with the img that you wrote to your SD card.
Make sure that you have a freshly formatted SD card, preferably one with good small random block r/w speeds (eg Sandisk class 4 8G). Follow the instructions in verygreen's "Size Agnostic..." OP to the letter. Re-download all the files as you may have a corrupted one. Make sure to check MD5 this time. Try using Win32diskimager instead, the 0.1 version works better.
It should work. Good luck.
ebubar said:
You should run it and register it and setup wifi and everything first. Get the stock software working fine and dandy (its not half bad actually). Then, checkout this guide for installing CM7 onto an SD card:
http://clubnook.com/forum/showthread.php?953-Rooting-Instructions
It has worked for some rooting rookies so far and includes both windows and mac guides specific to SD cards.
Click to expand...
Click to collapse
Thanks for the link. I have given this some thought, and it doesn't seem reasonable that booting from an SD card should depend upon the state of registration of the device because the whole idea of booting from an SD card means that the content of the SD card is loaded in the place of the stock software.
robot8 said:
FWIW you do not have to boot into stock B&N at all before you setup and install to CM7 SD card. One of my NCs has never ever booted into stock ROM at all, I installed CM7 onto SD card and running off that from the moment it was unboxed.
The NC will always boot off the SD card first, so if it's booting off eMMC instead then there must be something wrong with the img that you wrote to your SD card.
Make sure that you have a freshly formatted SD card, preferably one with good small random block r/w speeds (eg Sandisk class 4 8G). Follow the instructions in verygreen's "Size Agnostic..." OP to the letter. Re-download all the files as you may have a corrupted one. Make sure to check MD5 this time. Try using Win32diskimager instead, the 0.1 version works better.
It should work. Good luck.
Click to expand...
Click to collapse
Thanks. Yes, I just replied to another poster that I didn't think that the state of registration of the device should matter since the whole purpose of a bootable SD card is to load the contents of the SD in place of the stock.
I have followed the instructions in verygreen's thread to the letter - several times. Also, I have tried to make other bootable SDs without success. But that's a good idea about trying Win32diskimager. Also, I will try a Sandisk class 4 card SD as soon as I can get to a store.
I do have a question. When I format the SD card what "allocation unit size" should I be using? (formatting through Windows) The default is 32 kb.
PROBLEM SOLVED!
Thanks to everyone for trying to help me figure this out. The winning idea belongs to robot8.
When I switched from using WinImage to using Win32diskimager, it worked immediately. I am now running CM7 on my Nook Color! Took forever and a day to boot though.
Congrats!
Re: allocation unit size, do you mean cluster size? Depends on how big the FAT32 partition is --- larger clusters used means more actual space used but too large a size can reduce access speed. Generally Windows defaults to suggested 4k for up to 8GB, 8GB-16GB = 8k, 16-32GB = 16k, and 32+ = 32kb.
Also the first boot is the longest --- shouldn't take as long after that. Welcome to CM7 - I don't regret installing it over stock after waffling for weeks on whether or not I'd use stock at some point -- CM7 is just too much faster with too many more options and tweaks for my impatience to deal with stock Froyo.
THANK YOU OP!
I had the same issue, tried 20x various ways, 2 different computers, 2 different SD readers, and it was WinImage that wasnt working correctly. Win32DiskImager solved it.
Thanks.
JowBe said:
PROBLEM SOLVED!
Thanks to everyone for trying to help me figure this out. The winning idea belongs to robot8.
When I switched from using WinImage to using Win32diskimager, it worked immediately. I am now running CM7 on my Nook Color! Took forever and a day to boot though.
Click to expand...
Click to collapse
Thanks so much! This finally got it to work for me too. Loving my new Android tablet
FWIW, WinImage does not work. Maybe it used to work, but it does not now. I posted about this a few days ago here.

[Q] Help with partitioning SD Card

Hello first I want to say a big THANK YOU to everyone that has put time and effort into making the Nookie what it is today....but I have a noob question.
I recently got a 16gb micro SD and can successfully get the 0.6.8 Nookie to run on my nook color, my problems start when I try to "recover" my other 13gb's. Before I get burned and tossed aside I have checked
http://forum.xda-developers.com/showthread.php?t=922324&page=92
http://forum.xda-developers.com/showthread.php?t=883175&highlight=partition&page=103
and about 5 other pages and they all say the same thing..use EASEUS, grab the slide bar and voila. It appears to work but when I install it in the NC it either becomes very unstable or just boots to the NC as if the SD card was not there.
Anyone have any ideas?
Jeep_Lover said:
Hello first I want to say a big THANK YOU to everyone that has put time and effort into making the Nookie what it is today....but I have a noob question.
I recently got a 16gb micro SD and can successfully get the 0.6.8 Nookie to run on my nook color, my problems start when I try to "recover" my other 13gb's. Before I get burned and tossed aside I have checked
http://forum.xda-developers.com/showthread.php?t=922324&page=92
http://forum.xda-developers.com/showthread.php?t=883175&highlight=partition&page=103
and about 5 other pages and they all say the same thing..use EASEUS, grab the slide bar and voila. It appears to work but when I install it in the NC it either becomes very unstable or just boots to the NC as if the SD card was not there.
Anyone have any ideas?
Click to expand...
Click to collapse
I use Lexar Bootit ....a free utility...to format and flip the bit that says its a removeable drive, then your windows pc drive management can see and format it as full capacity fat32.
Hey thanks for the tip, unfortunately it won't work. I forgot to mention that I followed this tutorial ..... and updated my driver (saved my original Windows just in case) to a hitachi driver and now I can switch my SD memory card forth "removable" to "logical" and back when needed. Once I get it as a logical drive I was EASEUS to increase the size of partition 4 (SD Card)..but again no dice!!!
Seeing that I am a noob I can't post the link to the tutorial but I'll say it worked like a charm and when I want to go back to the original I just need to "roll back" the driver.
Well, a couple of things:
Are you using a Sandisk card? Sandisk class 2 and 4 cards have been found much more stable than most others for running a ROM from SD, and problems with SD installs often go back to the card.
Any particular reason you went with Nookie Froyo? It has pretty much fallen out of use since the NC's stock OS was updated to Froyo in May. If you want an SD install, there's a simpler, size-agnostic method for CM7, which is also a more robust and capable OS and a more advanced version of Android (Gingerbread 2.3.4 rather than Froyo 2.2). I would recommend CM7.1 RC1, or if you're adventurous, Nightly 136.
Taosaur said:
Well, a couple of things:
Are you using a Sandisk card? Sandisk class 2 and 4 cards have been found much more stable than most others for running a ROM from SD, and problems with SD installs often go back to the card.
Any particular reason you went with Nookie Froyo? It has pretty much fallen out of use since the NC's stock OS was updated to Froyo in May. If you want an SD install, there's a simpler, size-agnostic method for CM7, which is also a more robust and capable OS and a more advanced version of Android (Gingerbread 2.3.4 rather than Froyo 2.2). I would recommend CM7.1 RC1, or if you're adventurous, Nightly 136.
Click to expand...
Click to collapse
Thanks for the info unfortunately I am using a 16gb PNY, class 4 and at $15 I couldn't pass it up...looks like I should have done some more reading first. Really I have no clue why I am using the Nookie, my wife said said that was the one she wanted. I think she just likes saying "Nookie", but I'll give the CM7 a go and see what trouble I can get into.
thanks again...
Taosaur...I was able to get the CM7 mod up and running in no time flat. Now the wife wants me to see if I can get bluetooth working.
You said "I was able to get the CM7 mod up and running ...." so I assume you got your problem fixed. That's good.
About bluetooth.
1. Turn off Wifi
2. Power off NC
3. Power on NC
4. Turn on bluetooth
5. Turn on wifi
votinh said:
You said "I was able to get the CM7 mod up and running ...." so I assume you got your problem fixed. That's good.
About bluetooth.
1. Turn off Wifi
2. Power off NC
3. Power on NC
4. Turn on bluetooth
5. Turn on wifi
Click to expand...
Click to collapse
Yep, I had to do the above the first time I turned on bluetooth, but haven't had any trouble toggling it on and off since then. Just open notifications (that broken-circle-and-arrow button on the status bar) and you have toggles there for Wifi, bluetooth, and a couple other things.
@ Taosaur,
I've seen your signature indicate you are running nb136, any change or improvement (both slightly and/or significant) over the previous ones?
Jeep_Lover said:
Thanks for the info unfortunately I am using a 16gb PNY, class 4 and at $15 I couldn't pass it up...looks like I should have done some more reading first. Really I have no clue why I am using the Nookie, my wife said said that was the one she wanted. I think she just likes saying "Nookie", but I'll give the CM7 a go and see what trouble I can get into.
thanks again...
Click to expand...
Click to collapse
Damn! My wife never says "nookie".
votinh said:
@ Taosaur,
I've seen your signature indicate you are running nb136, any change or improvement (both slightly and/or significant) over the previous ones?
Click to expand...
Click to collapse
I haven't done much but read and browse a little since I flashed it, but I haven't noticed any difference from 7.1 RC1, which wasn't really any different from Nightly 102 I had before that. I mostly just flashed this time for the integrated OC/Tweaks kernel, without the video/lag problems that were reported in 132-134.
Thanks for an update, m8
maybe someone can help me, i'm about to loose my mind here trying to figure this out. i'm using a Sandisk class 4 16gb card running CM7 with the OC kernal.Did all of this using the size agnostic install method. everything is working fine but i can't for the life of me figure out how to access the rest of the space on my SD, when i insert the sd card into my PC it just shows up as the 115mb partition. i've tried using EASeus, the lexar bootit, and some other partition tool with no luck. with Easeus i select the 13gb FAT32 partition and make it active and thats it right? does it need to be logical? and which partition am i resizing?
Dr. Light said:
maybe someone can help me, i'm about to loose my mind here trying to figure this out. i'm using a Sandisk class 4 16gb card running CM7 with the OC kernal.Did all of this using the size agnostic install method. everything is working fine but i can't for the life of me figure out how to access the rest of the space on my SD, when i insert the sd card into my PC it just shows up as the 115mb partition. i've tried using EASeus, the lexar bootit, and some other partition tool with no luck. with Easeus i select the 13gb FAT32 partition and make it active and thats it right? does it need to be logical? and which partition am i resizing?
Click to expand...
Click to collapse
None of the above. Windows will only recognize the first partition on a SD card, and when you make a SD bootable, that first partition will be the boot partition. To access the larger storage partition, connect your NC with CM7 running to the PC over USB. Open notifications on the NC, tap through "USB connected" to the USB screen, and "Turn on USB storage." Windows will now detect two storage drives, NookColor (the system partition, where apps install) and SDcard (the large storage partition).
The only time you'll want to remove the card from the NC and plug it into your PC is when you want to put on a new cm...zip update file to flash a new ROM.
I used the size agnostic install method with a 16gb PNY calss 4 SD and after all the steps were completed I was showing 13.8gb free for my SD card when I looked at in on the NC. Not believing my eyes I pulled it out and looked at it with EASUS and it showed partition 4 as 13.8gb (utilizing all the cards remaining space). I then downloaded a few things and added a few books for my wife and the space shrank to 13.4gb. As stated above your computer wont show it.
In short have you looked on the NC under "Storage" (I think that is were I found it) and verified you don't have the full capacity already?
Also there is another method I needed to use when I was messing with an earlier version (Nookie) that allowed me to see an SD card as a "Local Device" so windows would let me see all partitions on the hard drive. I can't post a link until I have more posts but email me and I can send you the link if interested.
Taosaur said:
None of the above. Windows will only recognize the first partition on a SD card, and when you make a SD bootable, that first partition will be the boot partition. To access the larger storage partition, connect your NC with CM7 running to the PC over USB. Open notifications on the NC, tap through "USB connected" to the USB screen, and "Turn on USB storage." Windows will now detect two storage drives, NookColor (the system partition, where apps install) and SDcard (the large storage partition).
The only time you'll want to remove the card from the NC and plug it into your PC is when you want to put on a new cm...zip update file to flash a new ROM.
Click to expand...
Click to collapse
thanks, well that got me some where. i connected nook to PC, turn on storage mode and it shows E/F drive. click either one and it says "Please insert disk into removable disk E/F" so then i turn off debugging and the nook color internal memory pops up as drive F, while clicking on drive E gives me the same error as above. any ideas? btw i'm on Windows 7 64bit, do i need any kind of special drivers or anything?
It is because windows will only allow you to manipulate the first partition on an SD card...even if it "sees" the other partition as another card it will not do anything with it. EASEUS will show you all the partitions on the SD.
The only way I got Windows to see all the partitions and do anything with them was to change my driver via the "Hitachi fix" If you google Hitachi driver SD card you will find it. I used this site and even though it is long it did exactly as advertised and now I install this driver when I need to format just the partition of an SD card and then "roll back" the driver when I'm done. It tricks windows into thinking it is a local device instead of removable. www/1src/com\forums\showthread.php?t=133718
change / to .
\ = /
I can't post a link as I'm still a noob...
Jeep_Lover said:
It is because windows will only allow you to manipulate the first partition on an SD card...even if it "sees" the other partition as another card it will not do anything with it. EASEUS will show you all the partitions on the SD.
Click to expand...
Click to collapse
S/he really doesn't need Windows to do anything with those other partitions--I suspect messing with them was where s/he went wrong in the first place.
Dr. Light said:
thanks, well that got me some where. i connected nook to PC, turn on storage mode and it shows E/F drive. click either one and it says "Please insert disk into removable disk E/F" so then i turn off debugging and the nook color internal memory pops up as drive F, while clicking on drive E gives me the same error as above. any ideas? btw i'm on Windows 7 64bit, do i need any kind of special drivers or anything?
Click to expand...
Click to collapse
I suggest you start over, because you probably damaged your install when you were messing with the partitions earlier. I'm also using Win7x64, and no, I didn't need any special drivers. Delete all partitions except "SDcard" in EASEUS, expand that partition to the whole card, then write verygreen's image to the card again and re-install. At that point, you should be able to access storage over USB from CM7 without turning off debugging or taking any other special steps other than "Turn on USB storage."
Taosaur said:
S/he really doesn't need Windows to do anything with those other partitions--I suspect messing with them was where s/he went wrong in the first place.
I suggest you start over, because you probably damaged your install when you were messing with the partitions earlier. I'm also using Win7x64, and no, I didn't need any special drivers. Delete all partitions except "SDcard" in EASEUS, expand that partition to the whole card, then write verygreen's image to the card again and re-install. At that point, you should be able to access storage over USB from CM7 without turning off debugging or taking any other special steps other than "Turn on USB storage."
Click to expand...
Click to collapse
alright i'll give it a shot when i get home from work. is the verygreen image the same one found in the CM7 size agnostic SD thread?
"http://crimea.edu/~green/nook/generic-sdcard-v1.3.img.gz"
and when i delete all partitions except for "SDCARD" do i need to make that partition logical or active or anything?
again thanks for your help.
Dr. Light said:
alright i'll give it a shot when i get home from work. is the verygreen image the same one found in the CM7 size agnostic SD thread?
"http://crimea.edu/~green/nook/generic-sdcard-v1.3.img.gz"
Click to expand...
Click to collapse
Yep, verygreen is the author of that thread and image.
Dr. Light said:
and when i delete all partitions except for "SDCARD" do i need to make that partition logical or active or anything?
Click to expand...
Click to collapse
No, in fact you might be able to write the image without messing around in EASEUS at all--I'm just not sure if WinImage (or whatever) would write to the whole card or just one partition. I know if you tried to format it, Windows would only format the boot partition.

[Q] External SD - Tab no see it.....SOLUTION FOUND SEE OP

UPDATE well it looks as though I have found a solution to my woes. I made several attempts of formatting the 2gb card in my laptop to no avail. I tried my old captivate that it originally came out of and the cappy had troubles reading it. I then stuck it in my evo and it registered instant, so I did asdcard format on my evo and then finally the tablet registers the card. In case this helps anyone else
First off someone please enlighten me on the tabs use and the way it mounts the external SD, I read somewhere that it only uses it for media files such as music books and pics. I have an 8GB that belongs in my EVO, and a 2gb that I had for my captivate I was hoping to use in my Tab for now.
Here's my story, maybe someone can shed a little light here: My tab was purchased with Stock 3.1, I was getting annoyed by the constant update request so I went ahead and rooted and installed CWM without incident, then I decided to install the Stock rooted update from here, however when I insert my SD cards they say they are unavailable. So I stick my 2gb in my laptop format to fat32 (should this be different?, typically it works in every other device I own) It still won't read, I did exactly as others point out in other threads but still I am stumped as to how the card is made available to the OS ? Now in a fit of frustration I pulled my 8gb out of my evo put the 2gb in and wham there it is, I put the 3.2 download on the 8gb popped it in tab entered CWM and flashed the update, I don't know if the 2gb is mountable in CWM I will try tonight but the 8gb was mountable through CWM however my 8gb also was not available to Android even after the update.
So what the heck is the use of the external SD and how is it used?
I think you might have an issue with your ROM,
I use my external SD for my titanium backups and other files I want to keep portable. I have used the SD card through my PC via USB and directly by putting into the PC's card reader.
Have you tried using a file manager? I use File Manager HD and the external card shows up as Storage on the left bar.
As for the filesystem, I think I may have originally formatted as FAT but I have also pulled my SD out of my Blackberry and used it to install Honeylicious through CWM,
All in all I dont think you should be having the issues that you are having...
Good luck
If it won't mount in CWM you need to format it in your android phone, that fixed it for me. Once it is formatted correctly you'll see a notification that an SD card is installed. Also my PC wouldn't see it until I put a custom rom on. Also to store items on it you can use a file manager to move things to and from it.
~Sent from my Droid SuperCharge~
>DARKMAN< said:
If it won't mount in CWM you need to format it in your android phone, that fixed it for me. Once it is formatted correctly you'll see a notification that an SD card is installed. Also my PC wouldn't see it until I put a custom rom on. Also to store items on it you can use a file manager to move things to and from it.
~Sent from my Droid SuperCharge~
Click to expand...
Click to collapse
The 8gb card did mount in CWM but would not mount in the OS, or when it would I would get it was unavailable or sometimes even empy when I know there is only about 1 gb free space, I did not test the 2gb in CWM mainly because it was late and I needed to go to bed, but I will try tonight. The 8gb is the one I updated to rooted 3.2 with, I still need to go to 3.2.1 ? Is there a rooted Stock 3.2.1 floating around I really havent looked much into it yet
I have noticed that getting the iconia to read some sd cards is like tossing dice..Most people who have this issue says one card works perfect in every device but not in the iconia.. Some say the card will work sometimes and not others .. Some say the card works in cwm and not with file manager..
The issue here i think is that you have two CARDS THAT ARE FUSSY ABOUT mating with the iconia. OR Your rom .i would read the threads in the rom you are using.. IF still nothing that sounds like your issue ask the DEV about this.. If STILL No luck you can either try to buy a new diffrent card or flash a new rom to try and Diag. this issue..
Good luck..
Silly question
Is your microSD formatted FAT32?
If it is anything else, your unit may have trouble reading it depending on what ROM you are using - Not all ROM's are capable of reading NTFS or other file systems.
Sometimes, microSD's freak out as well, and the only way to get it back to normal is to format it in a Symbian phone (Nokia)
Also, make sure you are using the correct mount point for the card - /mnt/external_sd - Root Explorer and other apps like it can get there.
Other than that, you may just have a bad microSD, I have had many of them die for seemingly no reason.

[Q] Please help!!! Noobie messed up NC (big time)

I have a Nook Color. Somehow (and I really can't recall how), I can no longer get to the B&N side of my Nook. Even with the micro-SD out, I still go directly into CYANOGEN. To make matters worse, every single app I try to get from the market will not download. Once I 'Accept & download', the app starts to download then I get an Error overlay screen: "name-of-software" could not be downloaded due to an error.
So I have a V--E--R--Y generic tablet that can't do much. Please help.
Thanx in advance...................................
How did you go about installing CM7? Did you install it to the internal storage?
Please help!!! Noobie messed up NC (big time)
That's part of the problem. I did not consciously install to internal memory, I wanted it to boot from the SD card.
That's what I did...
That's what I did once. I unwittingly installed it onto the internal memory. It also happened to be really buggy. I restored it to stock using Clockworkmod Recovery. Did you use the installer for the SD card?
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card.
I put the ZIP file for: gapps-gb-20110828-signedgapps-gb-20110828-signed, and gapps-gb-20110828-newtalk-signed.
I tried the home-power key combo. It asks me if I'm sure that I want to restore to the factory. I say "Yes" but when the Nook starts up, I'm still in cyanogen mod.
Should I (re-)format the MicroSD, write 1gb_clockwork-3.2.0.1-eyeballer (or another version) then move recovery-clockwork-3.2.0.1-encore?
Aside from not being able to get back to B&N-supplied software, I can't do anything with the NC as an Android tablet.
OP, do you intend to install CM7 into the internal memory?
All I'm trying to accomplish is to get back to the factory NC settings. Once I can get there, I'll decide.
How to hard reset and Factory Default Nook Color - http://goo.gl/pSFui
Power down your NC. Wait approximately 10 seconds or so-- just give it a bit of a break between shut down and factory reset.
Press and hold power button and your "N" home button almost simultaneously-- press Power first and then the N.
Hold these until your screen flashes the "Touch the future of reading" message; hold for a second or two afterward, then release. You will then get a prompt asking if you want to reset your nook to factory. Press the home button to continue. It will ask you to confirm. Press the home key again. Your nook will deregister, reset, and when it reboots, you will see "Kate" in her tutorial video, as if you'd never registered it in the first place.
(Obviously your account info will still be valid-- simply register with your email/pw combo instead of creating a new account.)
Hope this helps- if so please click thanks
Sent from my MB860 using XDA App
I did this (more than once - grrrrrrrrrrrrr!). I never see the "touch the future....." message. Instead, I get a cyanogen mod 7 screen with the message "Booting into Recovery". Then I get a sickly yellow-greenish screen that asks (twice) if I want to teset. I confirm both times then it "wipes" the data. It then boots into a cyanogen mod 7 screen (and the skateboarding 'droid) and I go through the registration process.
Now, when I select a Google app, the downloading (Google Maps) seems to be taking forever, but at least I'm not getting the error I got before.
Also, I do not see the progress of the download that I'm used to seeing on my phone. All I see is "movement" under the "Downloading..." message. How long do I leave it before I abort the download?
Your micro sd card is removed right?
Sent from my MB860 using XDA App
mike11050 said:
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card.
I put the ZIP file for: gapps-gb-20110828-signedgapps-gb-20110828-signed, and gapps-gb-20110828-newtalk-signed.
I tried the home-power key combo. It asks me if I'm sure that I want to restore to the factory. I say "Yes" but when the Nook starts up, I'm still in cyanogen mod.
Should I (re-)format the MicroSD, write 1gb_clockwork-3.2.0.1-eyeballer (or another version) then move recovery-clockwork-3.2.0.1-encore?
Aside from not being able to get back to B&N-supplied software, I can't do anything with the NC as an Android tablet.
Click to expand...
Click to collapse
Eyeballer is a clockwork recovery bootable SD image which is used to install stuff (e.g. CM7) to internal memory.
http://forum.xda-developers.com/showthread.php?t=1030227
VeryGreen (size agnostic thread) is the SD image which creates a full OS on the SD card itself leaving the internal memory alone.
http://forum.xda-developers.com/showthread.php?t=1000957
You have used the Eyeballer method and have therefore done an internal install. You must also have installed a CM7 zip not just the gapps zip as they are just google apps and not an actual ROM.
You have 2 ways forward.
The simplest is if you want to end up with internal CM7 and are not interested in running the B & N ROM. Start again by creating the Eyeballer SD card using win32diskImager. Make sure you use a real USB SD adapter and not a card slot on a laptop. Put onto the card the CM7 ROM zip. I recommend the one from the KANG MiRaGe thread in the development forum. It is the most up to date and stable version available at the moment. Also put on one gapps zip (20110828). Now put the card in Nook, Power up and when in recovery then use the menus to format system, data and cache. Do NOT format boot. Then flash the CM7 ROM zip, then the gapps zip. Power down and prepare a clean SD card either by reformatting the eyeballer card with something like the HP USB card utility or a partition manager in the PC like miniTools. You could also use a different SD card if you want to keep the eyeballer one for future use. Put the card back in, power up and you should now be in a stable CM7 environment where you can set up wifi, register with the Google market and download apps.
The second way if you really want to return to stock on the internal and run CM7 of the SD card then use the eyeballer method but instead of flashing CM7 and gapps you now use a return to stock zip. Make sure you still format the partitions as before.
http://forum.xda-developers.com/showthread.php?t=914690
Once you have it back to stock and upgraded to whatever stock you want then follow the VeryGreen method from the link above. Once the SD card has put CM7 on itself, do not worry that there is only a 114MB space if you ever put the card back in the PC. That is normal; it is just the boot partition that the PC sees. The rest of the card can be seen if you USB connect the Nook to the PC.
Yes it is. Also, even though I'm not getting an error, no apps are loading.
You absolutely rock!!!!!!!!!!!!!!
I'm back at the NC "baseline". I tried to go back to a 1.2 (which is what it came with) using "update-nc-stock-1.2-signed". Once I re-booted, it kept returning to the NOOK COLOR screen. Then I used a 1.0.1 from your last post. It came back fine with 2 exceptions. 1) I now have a message that I need to install a SD card. When I do, my (Windows Explorer) "Computer" screen only recognizes the SD card and not the Nook. These are piddly little issues, but if I can get them fixed, great! (Right now, I cannot upgrade the NC or move any books or load any apps.
Thanks again!!!!!!!!!!!!!!!
mike11050 said:
That's part of the problem. I did not consciously install to internal memory, I wanted it to boot from the SD card.
Click to expand...
Click to collapse
I had this same problem. Since I am a new member, and can't post links, I'm going to try to help.
Install Clockwork Recovery to an SD card. Yes, the same way you did when installing clockwork to the SD the first time.
There are some threads on other fourms (google is your friend) that have links to Update files that allow you to update while keeping clockwork recovery, and some that will remove clockwork recovery. If you can remove the SD card and boot into the Stock Nook OS, then don't worry about installing 1.0.0 or 1.0.1 like some of the forms say. Just place the .ZIP file of the hacked update (usually 1.3 or 1.4 I think) into the root folder of the SD card, then Install it on your NC just like installing CM7 onto the internal memory. Your nook should start working again. It restored mine to full functionality. I can now pay 3 Dollars for angry birds, but at least its not as terribly slow and laggy as it was with CM7.
mike11050 said:
You absolutely rock!!!!!!!!!!!!!!
When I do, my (Windows Explorer) "Computer" screen only recognizes the SD card and not the Nook. These are piddly little issues, but if I can get them fixed, great! (Right now, I cannot upgrade the NC or move any books or load any apps.
Thanks again!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
I had the same issue last weekend, somehow my internal memory had become unrecognizable to anything, and the local Barnes and Noble store had a SD card that repartitioned the internal memory, and I was back in business. And as an added bonus I now have the 4 GB app/BN partition and the 1 GB mostly useless partition.
mike11050 said:
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card. ...
Click to expand...
Click to collapse
The instructions I see when googling around where I see that image mentioned are instructions for installing onto the Nook Color internal memory.
In the simplest case, making an n2a card is much less complicated than that ~ all you need is on the PC, write the size agnostic image, then drop in the CM7 build you want to use, then put the card in the Nook and it creates itself. There are upsides and downsides to different n2a methods, but that one seems to be the easiest ~ I've done it successfully several times, and I'm certainly nothing like an expert when it comes to these Android systems.
A recovery card image will make a bootable recovery card ... and while that might not have been what you needed to get what you want, its what you need to get the nook back to stock.
You might want to go to
http://forum.xda-developers.com/showpost.php?p=22809801&postcount=148
... to get a version of the 1.4.1 upgrade that your recovery card can install. You'll probably have to wipe all sorts of partitions, which means you'll have to sign in with the B&N store again and you'll get to download you B&N apps again, but that's pretty straightforward.
This OP in this thread:
http://forum.xda-developers.com/showpost.php?p=10623716&postcount=1
... says that it will be necessary to format ("wipe") the /data and /system partitions, but it doesn't seem like you'll lose anything you want to keep. After all, you've either overwritten or completely tangled up your stock B&N info.
That post above has 1.4.1. There should be a signed 1.4.2 lying around somewhere, but if not, once its back to stock, you can update to 1.4.2 the normal way, download the B&N update file, drop it in the root of the Nook, make sure its at least 30% charged, and let it go to sleep, which will run the update file.

[Q] Chronic "Unexpected Lack of Boot Partition on the SD card! Please Report"

[Q] Chronic "Unexpected Lack of Boot Partition on the SD card! Please Report"
Hi,
First let me say - YES, i have searched all of the forums here (and a number of other sites) and seem to have tried almost every option.
I have Chronic "Unexpected Lack of Boot Partition on the SD card! Please Report" problems. The farthest I get guaranteed is the cyanogenmod boot and menu (if I try and bring it up). I'm simply trying to get the SD card with cm7 to boot reliably and not eventually loose the boot partition.
Off and on since spring I was able to burn a CM7 image (verygreen's size agnostic, and one or two others I have since lost track of) to a SD card; have had it boot to cm7 and it work for awhile - but then eventual degraded into the no partition found error. the majority of the time it just doesn't work and results in that annoying purple black screen.
When it does work, it only works for awhile and then the boot partition can't be found; a few very small 3 of times - if I copied a new update it woke back up ad worked for a couple of reboots then lost the partition again.
Anybody got time to take pity on my melted brain and take a few guesses?
Clearly I'm not only missing something - but as things have gotten worse, am now missing more (if that is possible) as I'm going backwards to see why it no longer works at all.
At this point wrong has happened so often, I'm just lost on what even worked way back when I started.
I'm trying to backtrack to where it at least worked a little for a few days...but noob world is decaying into worse world.
I tried a couple of other, older processes and a multiboot menu one that seemed promising (plus could handle the new naming conventions for 7.2 CM7); but that one never even got past the missing boot partition.
I have tried approx 10 2gb SDCards, Sandisk, Kingston, Unknown; Class 4 and mixed.
I have tried 3 8GB SD Cards, Sandisk, class 4
I have tried 1 16gb SD Card, Sandisk, class 4
I have tried a Vivitar Micro SD Card Reader
I have tried the micro SD card Adapters in a laptop, and then in a sandisk USB adapter.
I even tried doing it all using the Nook color via a USB cable.
I even tried leaving the nook color off and connecting the USB cable to the PC to initiate a boot.
Using Windskimager
Using SD formatter
Have formatted Full erase and overwrite.
Tried leaving partition size alone
Tried partition resizing up to 250mb
Tried cm7 zip alone and with gapps
WinXP on 2 desktops and a laptop
It sounds like you have run the gamut of attempted resolutions.
That message is part of the verygreen partitioning script that runs every time the verygreen recovery is run. So, that means the normal boot kernel for CM7 is not loading.
The way the verygreen SD should operate is it starts with uImage and uRamdisk on the boot partition. Those are verygreen's recovery files. The first time it is booted, it looks at your emmc to be sure it is a nook. Then it looks at the SD to see if it has been partitioned yet. If it is not, it partitions it into those partitions necessary for installing ROMs. After partitioning, it looks for a zip to install. If it does not find one, it shuts down and the next time it boots it does the same thing until it finds the first ROM zip to install. If it finds one, it installs it. The first time it installs a ROM, it renames those uImage and uRamdisk verygreen files to uRecImg and uRecRam and they become the verygreen recovery files. And it installs new uImage and uRamdisk files from the zip to become your CM kernel and ramdisk. These are what normally will load in the future to start CM.
Now, with the disk partitioned and CM installed, ordinarily, after the cyanomod logo comes up, it boots by default to CM via the uImage and uRamdisk files. If you intercede with the boot menu and tell it to boot to SD recovery, it looks for uRecImg and uRecRam to load the verygreen recovery. If that is loaded, the verygreen script does all its checking again, it verifies that emmc is a nook, then tries to verify if the SD is partitioned. If it is, it looks for a new zip to install. If, in checking to see if it is partitioned, it cannot find partition 1, it gives that message that has been bugging you.
So I see two things that are happening to you.
First, it is booting to the verygreen recovery first instead of CM. That could be due to a recovery bootloop happening. Look at my tips thread linked in my signature to see an explanation as to what that is and how to possibly get out of it.
Second, after it boots to the verygreen recovery, it does its checking and cannot find partition 1 of the SD and gives you that message.
What I cannot understand is, if you have no partition 1 on your SD, how is it booting to the verygreen recovery?
What you have not told us is what you have on emmc. Stock? Does it boot properly without the SD installed? Or does it go to stock recovery?
After this happens to you again, take the card out and put it in the PC. Tell us what you see. What files are there? Maybe look at it with Mini-Tool Partition Manager and see what partitions it reports.
leapinlar said:
What you have not told us is what you have on emmc. Stock? Does it boot properly without the SD installed? Or does it go to stock recovery?
Click to expand...
Click to collapse
Ditto on that - especially as it boots happily to that error message time after time after the green cyanomod screen appears and I can also do the menu trick to get it to go into recovery.
Just as a clarifier: A number of times it tried to do the install (text flowing by) and at the end claims it can't find the boot partition - odd (unless I have less of an idea of what I am doing than I think) as isn't all that running from that partition? A fairly even number of times it doesn't even run the install and just errors out right up front.
Once in a great while it all works, and I'm good for a few days - but eventually upon rebooting to get it back to normal (either by menu choice or by pulling the sd card) - all I get is that lack of partition again.
leapinlar said:
What you have not told us is what you have on emmc. Stock? Does it boot properly without the SD installed? Or does it go to stock recovery?
Click to expand...
Click to collapse
Yes with the SD card out it boots to stock, although a few time what looked like the CWMod menu came up after I shut down and started up without the SD card installed. Maybe only 2 or 3 times out of WAY to many boots to stock so the kids could read their books while I went to work.
I have even tried resetting the nook to factory on the off chance I did something dumb while mucking about to cause that.
leapinlar said:
After this happens to you again, take the card out and put it in the PC. Tell us what you see. What files are there? Maybe look at it with Mini-Tool Partition Manager and see what partitions it reports.
Click to expand...
Click to collapse
Will do so later tonight and will read the notes in your signature as well.
I saw something go by about the boot partition having to start at the 63 block or something - I can't believe ALL my SDcard adapters / writers are bad, but could the nook reader be screwy? Anyway to do a real test? I've been using the Easeus Partition Manager, but will try the Mini-Tool Partition Manager.
Thanks for the step by step explanation of exactly what happens in the process so I can again get a handle on what it's all doing. That all makes sense to what it looks like it tries to do. Deeply appreciate the time!.
You know, I am beginning to suspect something is wrong with your card reader built into the nook. Some sort of intermittent thing like a pin not making a good connection to the card. Put an ordinary SD in it and see if your stock can consistently read it.
Is your unit still under warranty? You might want to explore seeing if you can get it replaced.
Your downloaded verygreen image might be corrupted. Have you tried re-downloading it?
Sent from my NookColor using xda app-developers app
leapinlar said:
You know, I am beginning to suspect something is wrong with your card reader built into the nook. Some sort of intermittent thing like a pin not making a good connection to the card. Put an ordinary SD in it and see if your stock can consistently read it.
Is your unit still under warranty? You might want to explore seeing if you can get it replaced.
Click to expand...
Click to collapse
I had thought of that too - at stock it seems to have no problems reading consistently; I've done surface tests using partition manager - but haven't located any real other options of hard testing like once done for hard drives.
Plus the fact that sometimes, it will work for days before it craps out.
j8048188 said:
Your downloaded verygreen image might be corrupted. Have you tried re-downloading it?
Sent from my NookColor using xda app-developers app
Click to expand...
Click to collapse
A number of times - I went through and wiped all my downloads for the latest try.
Okay So As I mentioned I went back and wiped everything I had downloaded and restarted (again).
Current status is it's working BUT:
suspiciously too easy this time, worked first shot
- (having said that, I've had looking stupid and asking suddenly means it all starts working - so if it's that I'm good with this)
I've only rebooted into CM7, not back to stock at any time
Have not removed the SD card
I've not had time to load up the apps I like, just the kids games
- (sometimes I think it's the more wanted, the less reliable)
Obviously because I haven't removed the SD card, i haven't been able to retry things enough to recreate the other problems of boots right, yet can't find the partition when it really counts.
Changes (listing stupid things too, just because):
-Went back to my sandisk class 4 16gb HC card
-changed USB adapter back to sandisk one, using a sandisk micro to SD adapter that specifically says sdhc (although I think that is really just marketing
-Formatted the SD in the Nook x2, and did not use SDformatter
-Looked at the partition on the card with MiniTool not Easeus partition manager
-There is a step in verygreen's where you pop the card out and reconnect to the PC BEFORE adding the cm zip, made sure to do that - but could swear I had done it before.
Full painful boring steps that SO far has gotten it past the first stage of creation (again the full test is when I boot into stock a few times, or remove the SDcard for anything, or load my really wanted apps on the android side):
--Also note my lack of class 4 Sandisk cards, I only had one after all. BUT I have had this all work to this point with the 16gb only to have it go south.--
Painful details is so I can catch what is really worthwhile different as even WHEN I get it to work, I'm going back to try all the other cards because it worked so oddly and failed so oddly and differently - but that's just me.
> The 2GBs are:
6 Sandisk SD, don't see any class Rating
2 no brand SD, don't see any class Rating
1 Kingston SD, don't see any class Rating
> The 8gb are SDHC "Adata" Class 4 SDHC
> The 16gb is a Sandisk Class 4 SDHC
Using the 16GB Sandisk Class 4
--------------------------------
> Nook booted to stock
Inserted SD Card
Unmounted
Formatted sucessfully
unmounted and removed
> Put in Red SD / SDHC Adapter
Put in Sandisk MicroMate SDHC to USB Adapter
Put in Front USB spot
> Mounted as E Drive
E Drive shows standard Nook Folders:
.amdroid_secure
B&N Downloads
LOST.DIR
My files
> MiniTool Partition Wizard
Surface test = all good.
>Write the image on your SD card
Used Win 32 Disk Imager
After done with writing, eject and then re-insert the uSD card into your computer.
Two Partitions - 118 and 14.72gb
>Copied to card:
update-cm-7.1.0-encore-signed.zip
Installed correctly
configured wireless
Rebooted = OK
Rebooted = OK
>Turned off
Removed SD Card
Put in Red SD / SDHC Adapter
Put in Sandisk MicroMate SDHC to USB Adapter
Put in Front USB spot
copied gapps
>Boot into Recovery
Gapps installed
> boot
all good
did all set ups like before
added apps (7 games for kids)
rebooted twice
started using
added one app I really like (newshog)
Listening for drumming... nothing so far (Dr. Who reference)
I'm going to go the weekend before rebooting to stock as I can do some adding, and rebooting to android.
Maybe backup the droid side this time around.
THEN the death tests on Monday
-thanks for listening_
p.s. - Yes, I still suspect the card reader somewhat as REMOVING may be where it breaks down.
However, once or twice when I had the Unexpected lack of boot partition error - I was able to bring it back by doing a CM7 update via recovery, despite it refusing to find the boot partiton immediately previously - of course that means the SDcard was removed and reinserted. Most time reinsertion = no help.
You do not need to remove the SD to test booting to emmc. Just press and hold the n button during the boot until the boot menu comes up. Then select emmc/normal and boot. It will boot to stock. The only problem with doing that is now your SD boot partition is 'sdcard'. But should work for testing stock.
leapinlar said:
You do not need to remove the SD to test booting to emmc. Just press and hold the n button during the boot until the boot menu comes up. Then select emmc/normal and boot. It will boot to stock. The only problem with doing that is now your SD boot partition is 'sdcard'. But should work for testing stock.
Click to expand...
Click to collapse
Yes, I know - but it's two separate tests to see which one caused the problem.
Turns out that neither was needed - it was easier to create; my son simply turned it off (not a reboot cycle as I had been doing which worked).
When it was turned on, it no longer boots - it goes straight to BSOD (actually deep purple).
Booting into recovery gets me:
Penguin Logo
rcS!
Populating /dev using udev: done
Initializing random number generator.... done.
modprobe: chdir(2.6.32.9): No such file or directory
Starting Network...
Detected Standard B&N nook layout, emmc first
Error! Unexpected lack of boot partition on the SDCARD!
Please Report!
Poweroff when ready
Since I'm till held to the noob reposting limit of once every 5 minutes and the captha I can barely read - I'll post MiniTool result in about 5 minutes. I'll link a screen capture if i can here.
I tried to boot per menu to the EMMC stock; Clockworkmod Recovery v3.2.0.1 came up. I know I did emmc and what ever the second default is (which should be normal) - I'm pretty sure it was normal.
I offed it and did the same and confirmed it was the default; THIS time it came up Nook stock.
Is there some way I installed something to the stock NOOK and didn't remove it when I restored to factory? The other day I did the restore from that same clockworkmod screen NOT from the stock Nook environment.
I'm wondering if I somehow created my own monster way back when I first started this and was playing in the android environment.
I just edited what I wrote a few seconds ago. The reason it went to emmc recovery is because the recovery flag was not reset when that SD Recovery told you that error. Did you read my tips about recovery bootloops? When you exited 3.2.0.1, it cleared the flag and booted normally.
I still suspect hardware issues.
Just for Ha, Ha's I hooked the Nook via USB to the PC.
G Drive "Removable Disk G" (wants a disk to be inserted)
E Drive "MyNookColor" ( Lots of what I assume to be standard Nook folders.
See my edit above.
Attachement # 1 SD Card from Mycomputer:
Attachment # 2 MiniTool View of SD Card
Boot Partition
Properties using Minitool Partition Wizard (attached):
Used
Partition Info
File System Info
Surface Test of Boot Partition:
Perfect - so no picture.
This is SO aggravating - I almost would accept just knowing why rebooting wrecks something if I knew WHAT).
leapinlar said:
I just edited what I wrote a few seconds ago. The reason it went to emmc recovery is because the recovery flag was not reset when that SD Recovery told you that error. Did you read my tips about recovery bootloops? When you exited 3.2.0.1, it cleared the flag and booted normally.
I still suspect hardware issues.
Click to expand...
Click to collapse
Sorry, apparently not closely enough - got lots of time again.
....didn't expect that anyone would be watching, was busy posting pictures so I could go away and read and think...
Probably is hardware - wish I had some way to vigorously test that, I get that basic use in Nook Stock doesn't really prove everything is good.
Plus I bought refurbished and I have to go dig up the warranty, it was months ago, so not too hopeful and boxes long gone. Don't know how nice B&N is, free replacement charger and cord is one thing - whole another refurb unit is different if I can't show stock SD card reading is an issue, not sure how much they check, but I don't think they care about CM7 off a SDcard not working!
Everything looks perfect on that card. All the right files, partition sizes, etc. You have stock on emmc, CWM 3.2.0.1 on emmc recovery.
I still suspect hardware issues. Powering off makes card semi-unreadable. Can still boot to it but when checking for partition information on SD fails.
If you registered your nook, the serial number is all you need. Refurbished usually have a one year warranty. Mine did. Just tell them card reading is intermittent. Which it is. They are pretty generous. You still have stock on there.
Edit: Try just an ordinary SD and power off, reboot, and repeat many times and in between check card reading ability.
leapinlar said:
Everything looks perfect on that card. All the right files, partition sizes, etc. You have stock on emmc, CWM 3.2.0.1 on emmc recovery.
I still suspect hardware issues. Powering off makes card semi-unreadable. Can still boot to it but when checking for partition information on SD fails.
Click to expand...
Click to collapse
Yup, it's really the only thing that hasn't been able to be changed through all of this.
I've mostly gotten these results - I've managed to make it worse as I redid things and apparently got sloppy. But when going back to methodically following instructions I have what I had months ago. I had hoped buying other cards would make it at least act differently.
Thanks for all of the reviews and double checking, at least I now it's not something obvious (but wasn't obvious to me) that I missed along the way!
I'll have to call B&N and see how strict they are and if they take the "It just has trouble reading any SD card consecutively".
Now where was that review of the Nexxus 7.... and I wonder how all the tablet prices are going to drop especially for the Galaxy Tab. Buying is not as fun but I am completely beat with modding failures.
We are too fast with each other. Lol. See my edit above.

Categories

Resources