Hi guys can anyone give the working link of cf root for xxjvp 2.3.4....cause m using stock version and some app didnt work with superuser and can,t go easily to recovery mode....plz if anyone have tried any cfroot on jvp share with me
Sent from my GT-I9000 using XDA App
In the development section in the CF-Root thread are all versions (inclusive JVP)
Sent from my GT-I9000 using XDA App
look for v 3.7 which is intended for your rom CF-Root V.3.7
Or using the semaphore Kernel, it based on cf-root 3.7 with some tweaks. Really fast ...
http://forum.xda-developers.com/showthread.php?t=1112908&page=1
You can read here http://forum.xda-developers.com/showthread.php?t=788108 about that.
For stock 2.3.4 I'm using CF-Root-XX_OXA_JVP-v3.7-CWM3RFS.tar flashed with ODIN from the above link.
Or you can flash any custom kernel with ODIN...
POST WITH 3.7 LINK: http://forum.xda-developers.com/showpost.php?p=12651359&postcount=6
Related
I an currently running ee with phoenix 1.43, . I was wanting to know if I could just flash a froyo rom on to of those. I am currently on the DI18 radio as well. I have searches but all of the current roms talk about using odin. Any help would be appreciated. Thank you.
Sent from my SPH-D700 using XDA App
You can flash dj29 froyo over dl18 however your current kernal is 2.1 only.
Sent from my SPH-D700 using XDA App
Btw dj29 froyo can be flashed through clockwork and flashing a dk05 or dk17 modem through odin is not necessary for dj29.
Sent from my SPH-D700 using XDA App
Thanks for the fast response, so would my 2.1 kernel hinder anything running the rom?
Sent from my SPH-D700 using XDA App
Your kernal is a 2.1(Eclair) kernal only. It will nor work if u decide to run a 2.2(Froyo) rom. All froyo roms have a kernal included however u may not want to switch over because all kernals for 2.2 are 1000mhz with no mods availible like undervolting or overclocking.
Sent from my SPH-D700 using XDA App
hi everyone
i've just managed to soft brick my phone while trying to flash a kernel..
can someone help me unbrick it using a mac...dont have access to a PC
hmmm.. no one yet!!
JohnstonF said:
hmmm.. no one yet!!
Click to expand...
Click to collapse
Using windows you can reflash figure Be 2.2
Or if u were in a cmw recovery enabled rom then I can provided you the update. Zip for fugu kernel.
If Odin works in Mac then you can just flash another kernel/rom
Sent from my GT-I5800 using Tapatalk
rudolf895 said:
Using windows you can reflash figure Be 2.2
Or if u were in a cmw recovery enabled rom then I can provided you the update. Zip for fugu kernel.
If Odin works in Mac then you can just flash another kernel/rom
Sent from my GT-I5800 using Tapatalk
Click to expand...
Click to collapse
Thanks for trying to help managed to get hold of a friends windows PC and flashed 4.1 + fugumod 2.43 beta 800hz edition so far so good ..
Just one query ..doesn't the 4.3 update have voodoo app?
Sent from my GT-I5800 using XDA App
JohnstonF said:
Thanks for trying to help managed to get hold of a friends windows PC and flashed 4.1 + fugumod 2.43 beta 800hz edition so far so good ..
Just one query ..doesn't the 4.3 update have voodoo app?
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
4.3 update contains all previous updates of indroid, so just update it and u will find the voodoo app.
brjshshrma said:
4.3 update contains all previous updates of indroid, so just update it and u will find the voodoo app.
Click to expand...
Click to collapse
I did upgrade to 4.3 but no voodoo apply
Is it kernel specific?
Sent from my GT-I5800 using XDA App
JohnstonF said:
I did upgrade to 4.3 but no voodoo apply
Is it kernel specific?
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
Yes it is kernel specific. But dont know if ur kernel version is supported or not.
U can always try fugmod 2.4 beta3 kernel which definately supports it and its also very stable kernel.
sent from my g3 using xda app
I'm looking for the most stable and 100% stock 2.3.3 firmware for the SGS. I did a search but the threads were too old. Any suggestions, especially since I read many 2.3.3 suffer from battery issues ? Some of the newer 2.3.3 ROMs I tested (Asian) gave me weird brightness issues (screen changing brightness constantly).
Why ?
Just flash via odin the stock 2.3.4 jvq dedoexe and flash with it kernel dark core
Or install custom rom
Sent from my GT-I9000 using XDA Premium App
ayhamx360 said:
Why ?
Just flash via odin the stock 2.3.4 jvq dedoexe and flash with it kernel dark core
Or install custom rom
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
No. JVQ is too buggy for me (Phone app crashes) and brightness blinds me at night. I like to keeps things stock and not install kernels or other stuff.
I use JPI as it is an oficially released 2.3.3
I did not notice any bugs.
JVP is not oficially?
Netman_ said:
JVP is not oficially?
Click to expand...
Click to collapse
It is, but 2.3.4
Sent from my GT-I9000 using XDA Premium App
Netman_ said:
JVP is not oficially?
Click to expand...
Click to collapse
no it isnt official!!! Just leaked test software...
Sent from my GT-I9000
I like JVO although I believe that JVH gave me better battery life.
ayhamx360 said:
Why ?
Just flash via odin the stock 2.3.4 jvq dedoexe and flash with it kernel dark core
Or install custom rom
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Where did you find JVQ Deodexed whit no bugs?
criscan - Sent from my I9000 - XDA Premium app
i will suggest to use the jvq 2.3.4. I'm on stock + speedmod and after the fix for the phone.apk everything is fast and very stable
I'm on JVH stock (XEN) and it gives better battery life than unofficial stock JVP. It is a bit laggy though but with speedmod kernel and ext4 it is just fine
After updating to a new version of Darkyy's Rom on my Galaxy i9000 I have been having issues with the clockworkrecovery mod. The Rom is working fine however when try to enter recovery mode instead of showing CWM it shows a scattered, random mixed coloured screen however it is not frozen and will allow me to reboot by pressing the power button. is there anything I can do to fix this?
Bootloaders? Did you go from froyo to gb? If so, Search for bootloaders thread by nitr8 in development section and flash gingerbread bootloaders.
Sent from my GT-I9000 using XDA Premium App
both current and previous rom were on 2.2
Sent from my GT-I9000 using XDA App
Not sure then mate. Sounds like bootloaders though...... Tried asking in darkys forum/thread?
Sent from my GT-I9000 using XDA Premium App
Thanks anyway, won't let me post in the development section as im a new user
Sent from my GT-I9000 using XDA App
If anyone is having the same problem just flash Darky's 10.2 resurrection edition via odin. This has fixed all issues
Sent from my GT-I9000 using XDA App
Try to flash any custom kernel like semaphore or galaxian or talon dev and then come back to ur default kernel. You can either use SGS kernel flasher by Neldar or Odin (load kernel as PDA, DO NOT select "re-partition").
Hello
I want to give my Galaxy Note back to Samsung.
But before i need a Stock kernel from N7000XXLA6
maybe i can extrackt the zimage myself but i donĀ“t know how to flash a zimage.
So if somebody had an stock kernel for N7000XXLA6 pls uploaded.
thx vorny
use mobile odin
I think out will be available on deponent section in Dr learns thread which had all stock ROM
Sent from my GT-N7000 using xda premium