Failed to flash .. - Atrix 4G General

Ok everyone , use rsd flash 5.0 only don't update or your phone will get ****ed up when u go to flash

You have to unfreeze the apps you have frozen first.

Whatttttt?....

Try using RSDLite 5.3 and I have been to all of the AT&T versions and back many times and can still flash anyversion I want.
Sent from my MB860 using Tapatalk

firefox3 said:
Ok everyone , use rsd flash 5.0 only don't update or your phone will get ****ed up when u go to flash
Click to expand...
Click to collapse
There's the daily LOL!
Bye!

I kind agree on this one.anything higher than 5.0 ****ed up my phone.
Sent from my MB860 using XDA App

neer2005 said:
I kind agree on this one.anything higher than 5.0 ****ed up my phone.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Had no problems myself with 5.3, so I put it down to operator error.

Related

SBF errors

Hi I have been trying to flash SBF for about 2 weeks now. Can someone please point me to the 1.5.7 sbf that they know works. I have tried about 4 different files. And it either goes straight to processing and finishes in about 2mins then gives error, the other file goes fine and takes about 35min to finish but then gives the error cannot flash file. Iam now rooted on 1.83 but cannot enable webtop hack and would like flash a clean build. Thanks.
Sent from my MB860 using XDA Premium App
Think you have to flash. 1.2.6 retail sbg we have here first, than update to 1.5.7. No sure if you can go back from 1.8.3 but I was reading that some people here did it without any issues
Sent from my MB860 using XDA App
I flashed with RSD lite 5.0 the 5.4 is messed up and make sure ur puting the right file in there. There is a rsd lite no how on forums
Sent from my MB860 using XDA App
O and I was 1.57 greyblur to stock 1.57 then updated ota to 1.83 then gingerbreak ect ect
Sent from my MB860 using XDA App
Webtop hack doesn't work yet unless u no hoe to change files
Sent from my MB860 using XDA App
RPK925 said:
Hi I have been trying to flash SBC for about 2 weeks now. Can someone please point me to the 1.5.7 sbf that they know works. I have tried about 4 different files. And it either goes straight to processing and finishes in about 2mins then gives error, the other file goes fine and takes about 35min to finish but then gives the error cannot flash file. Iam now rooted on 1.83 but cannot enable webtop hack and would like flash a clean build. Thanks.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I got the .57 webtop hack to work on .83 after clearing my /data.
Not sure why this works (I had try to clear everything *dock* *portal* etc in /data already) but it did.
grncivic2001 said:
Webtop hack doesn't work yet unless u no hoe to change files
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
What files do I need to change. I have root exploere.
Sent from my MB860 using XDA Premium App
eval- said:
I got the .57 webtop hack to work on .83 after clearing my /data.
Not sure why this works (I had try to clear everything *dock* *portal* etc in /data already) but it did.
Click to expand...
Click to collapse
How did you do that?
Sent from my MB860 using XDA Premium App
Where did you get the 1.5.7. SBF that works? Can someone post a link please.
Sent from my MB860 using XDA Premium App
RPK925 said:
Hi I have been trying to flash SBF for about 2 weeks now. Can someone please point me to the 1.5.7 sbf that they know works. I have tried about 4 different files. And it either goes straight to processing and finishes in about 2mins then gives error, the other file goes fine and takes about 35min to finish but then gives the error cannot flash file. Iam now rooted on 1.83 but cannot enable webtop hack and would like flash a clean build. Thanks.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I am 100% sure this link works. Ive flashed it myself several times.
http://bandbinnovations.com/xda/OLYFR_U4_1.5.7_SIGNED_OLPSATTSPE_P012_HWolympus_1g_1FF.sbf.gz
Consider using RSDLite 5.0 and not any newer versions.
mrnicotra said:
I am 100% sure this link works. Ive flashed it myself several times.
http://bandbinnovations.com/xda/OLYFR_U4_1.5.7_SIGNED_OLPSATTSPE_P012_HWolympus_1g_1FF.sbf.gz
Consider using RSDLite 5.0 and not any newer versions.
Click to expand...
Click to collapse
That link didn't work. Can someone post a link they know that works thanks
Sent from my MB860 using XDA Premium App

not letting me update to current update after flashing sfb

I just came from Gingerblur 4.5 and reflashed my sfb files from 1.2.6, to 1.5.2. Now i'm trying to OTA update it's saying i'm at the current version. Also, I'm trying to update with the motorola software update to the current version, and it's not letting me =/ also now trying to flash with RSD lite, it's saying " Failed flashing process. Unable to retrieve interface handle. (0x727; phone disconnected).
Which provider are you with?
CaelanT said:
Which provider are you with?
Click to expand...
Click to collapse
AT&T why do you ask?
tripleh3lix said:
I just came from Gingerblur 4.5 and reflashed my sfb files from 1.2.6, to 1.5.2. Now i'm trying to OTA update it's saying i'm at the current version. Also, I'm trying to update with the motorola software update to the current version, and it's not letting me =/ also now trying to flash with RSD lite, it's saying " Failed flashing process. Unable to retrieve interface handle. (0x727; phone disconnected).
Click to expand...
Click to collapse
Maybe because the update 1.83 comes after 1.56, not 1.52
Sent from my GT-I9100 using XDA Premium App
co.ag.2005 said:
Maybe because the update 1.83 comes after 1.56, not 1.52
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
hmm i did it this way before.. not sure why it's giving me issues now. =/
tripleh3lix said:
hmm i did it this way before.. not sure why it's giving me issues now. =/
Click to expand...
Click to collapse
Huh. Not sure either then. So you're running 1.52? Try flashing 1.56 then try updating
Sent from my GT-I9100 using XDA Premium App
co.ag.2005 said:
Huh. Not sure either then. So you're running 1.52? Try flashing 1.56 then try updating
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Okay, so I guess when I was running the motorola updater it installed a new set of drivers.. I had to restart my computer and it's updating fine. DOH! Thanks guys for your advice
tripleh3lix said:
Okay, so I guess when I was running the motorola updater it installed a new set of drivers.. I had to restart my computer and it's updating fine. DOH! Thanks guys for your advice
Click to expand...
Click to collapse
Good deal!
Sent from my GT-I9100 using XDA Premium App
co.ag.2005 said:
Huh. Not sure either then. So you're running 1.52? Try flashing 1.56 then try updating
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Wrong!
4.1.26 to 4.1.57 to 4.1.83 on AT&T.
co.ag.2005 said:
Maybe because the update 1.83 comes after 1.56, not 1.52
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Again, sorry, but wrong.................since you posted it twice I felt compelled to correct it twice.
4.1.26 - 4.1.57 - 4.1.83
CaelanT said:
Again, sorry, but wrong.................since you posted it twice I felt compelled to correct it twice.
4.1.26 - 4.1.57 - 4.1.83
Click to expand...
Click to collapse
Ok. .57... I was off by .1... that update was ages ago. Feel better now?
Sent from my GT-I9100 using XDA Premium App

A little help needed (please)

Hi all got myself a note and its running liquid ics rom I'm looking to go back to stock nd want to make sure that I don't brick my device is it just a case of flashing an open Europe rom using Odin nd then it all be back to normal
Thanks in advance for any help given
Sent from my GT-N7000 using xda premium
toonarmy85 said:
Hi all got myself a note and its running liquid ics rom I'm looking to go back to stock nd want to make sure that I don't brick my device is it just a case of flashing an open Europe rom using Odin nd then it all be back to normal
Thanks in advance for any help given
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yes when in doubt all you need to do is flash the stock rom via Odin of cause if you want to keep root you might want to use mobile odin pro
Thanks buddy was a bit worried after seeing all the stuff about leaked ics roms nd kernels nd that so there's deffo no chance I'll brick wen using Odin
Sent from my GT-N7000 using xda premium
toonarmy85 said:
Thanks buddy was a bit worried after seeing all the stuff about leaked ics roms nd kernels nd that so there's deffo no chance I'll brick wen using Odin
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
As long as you are flashing a good image and you don't unplug the cable in the middle of it or loose power to your computer.
So using a stock image from samfirmwares would be fine then
Sent from my GT-N7000 using xda premium
toonarmy85 said:
So using a stock image from samfirmwares would be fine then
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
indeed they should come in the form of a .md5 file anyway so it will check that it is not corrupt before flashing. You may find that when you reboot the note you get force closes etc just boot into recovery and wipe cache/data to fix this
Thanks a lot buddy really appreciated
Sent from my GT-N7000 using xda premium

Weird issue

I got a new phone and I want to use my huawei for testing roms etc. But I reinstalled GB and it wouldn't boot up only if i'm going to the stock recovery then wipe data. Then i'm in GB and if I reboot I need to wipe data again so I cant install aurora because GB doesn't work and its really annoying
Please help
Sent from my LG-P990 using xda premium
Flash froyo again, puting dload folder on sdcard.
Then flash GB and try again..
I cant find any Froyo links
Sent from my LG-P990 using xda premium
I have this one http://www.mediafire.com/?anwnhlx5mytr73j
But it is the portuguese one but you can try anyway
Can you change it to engish if your booted.
So yes then its OK
Btw: thanks a lot man for searching
Sent from my LG-P990 using xda premium
TheJoker0 said:
I have this one http://www.mediafire.com/?anwnhlx5mytr73j
But it is the portuguese one but you can try anyway
Click to expand...
Click to collapse
Froyo works but when I install GB the same thing happens.
I tried V100R001C00B526G001 for GB
jaronstrypsteen said:
Froyo works but when I install GB the same thing happens.
I tried V100R001C00B526G001 for GB
Click to expand...
Click to collapse
Try b518 any other one.
Sent from my U8800
entrapmen said:
Try b518 any other one.
Sent from my U8800
Click to expand...
Click to collapse
I'm going to try
Thanks
jaronstrypsteen said:
I'm going to try
Thanks
Click to expand...
Click to collapse
Didn't work
I dont actually understand. What happens when you boot your phone in GB?
It booted like any other phone but if I do a reboot or shutdown then I got a bootloop I can only boot then if I wiped data via stock recovery.
But I tried install CWM that worked
Then I flashed aurora but the only problem is that I cant connect the signal falls down and I keeps saying connecting
Sent from my LG-P990 using xda premium
Try another custom rom, like MIUI.
Didn't work. It think its because of the GB version I installed. I dont know witch one it was but I'm going to try another GB version and see if that was the problem
Sent from my LG-P990 using xda premium
jaronstrypsteen said:
I got a new phone and I want to use my huawei for testing roms etc. But I reinstalled GB and it wouldn't boot up only if i'm going to the stock recovery then wipe data. Then i'm in GB and if I reboot I need to wipe data again so I cant install aurora because GB doesn't work and its really annoying
Please help
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
Did you have changed the partition size ?
Yes. Do I need to reflash the stock partition?
Sent from my LG-P990 using xda premium

[OTA] Rogers 4.4.2 update

Hey this is the pulled Rogers OTA file it should bump up the system version from 139.12.36.ghost_row.RCI.en.CA to 161.44.26.ghost_row.RCI.en.CA!! that is from Android 4.2.2 to Android 4.4.2... Useful For those who haven't got the OTA...
DOWNLOAD
Gundabolu SC said:
Hey this is the pulled Rogers OTA file it should bump up the system version from 139.12.36.ghost_row.RCI.en.CA to 161.44.26.ghost_row.RCI.en.CA!! that is from Android 4.2.2 to Android 4.4.2... Useful For those who haven't got the OTA...
DOWNLOAD
Click to expand...
Click to collapse
Thank you very much, really appreciated.
Is there a change log?
Sent from my XT1056 using xda app-developers app
EVOSerb said:
Is there a change log?
Sent from my XT1056 using xda app-developers app
Click to expand...
Click to collapse
All i know is its Kitkat 4.4.2 nothing else! I just pulled the OTA.... Know nothing else...
EVOSerb said:
Is there a change log?
Sent from my XT1056 using xda app-developers app
Click to expand...
Click to collapse
Here is the release notes for this update.
https://motorola-global-portal-en-c...ers/prod_answer_detail/a_id/98225/action/auth
maxone001 said:
Here is the release notes for this update.
https://motorola-global-portal-en-c...ers/prod_answer_detail/a_id/98225/action/auth
Click to expand...
Click to collapse
Thanks. They don't list new changes. It's just basically the stuff from 4.4 update. I wonder what they fixed in the .2 update?
Sent from my XT1056 using xda app-developers app
EVOSerb said:
Thanks. They don't list new changes. It's just basically the stuff from 4.4 update. I wonder what they fixed in the .2 update?
Sent from my XT1056 using xda app-developers app
Click to expand...
Click to collapse
It's the last google version of android. I don't remember exactly what they've changed but it's minor bugs fixed.
Can I just flash this with rsd lite over the current camera patch? Locked boot loader... Or can we sideload on this thing never figured that out
Sent from my XT1058 using Tapatalk
mcsqwizzys98 said:
Can I just flash this with rsd lite over the current camera patch? Locked boot loader... Or can we sideload on this thing never figured that out
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
NO!! This is just the OTA that you can flash via the stock recovery ONLY IF you are already on Rogers 139.12.36.ghost_row.RCI.en.CA firmware....
mcsqwizzys98 said:
Can I just flash this with rsd lite over the current camera patch? Locked boot loader... Or can we sideload on this thing never figured that out
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
If it is the update as downloaded to the phone(I believe it is) you'll need to sideload it with adb.
Steve-x said:
If it is the update as downloaded to the phone(I believe it is) you'll need to sideload it with adb.
Click to expand...
Click to collapse
Anyone got a link on how to sideload this baby? Did it on my n7 but idk if its different on the rogers moto x I never got the update and moto device manger isn't working so I'm stuck
Edit I am already on rogers
Damn I can't get into recovery to sideload I have the little Andy with a line underneath it saying no cammand and no button combinations work
Sent from my XT1058 using Tapatalk
mcsqwizzys98 said:
Anyone got a link on how to sideload this baby? Did it on my n7 but idk if its different on the rogers moto x I never got the update and moto device manger isn't working so I'm stuck
Edit I am already on rogers
Damn I can't get into recovery to sideload I have the little Andy with a line underneath it saying no cammand and no button combinations work
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
Press on the volume up button and then press the power button that should bring up the menu!!
Gundabolu SC said:
Press on the volume up button and then press the power button that should bring up the menu!!
Click to expand...
Click to collapse
Didnt work
Sent from my XT1058 using Tapatalk
mcsqwizzys98 said:
Didnt work
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
Or wait I think you should hold the volume up button and simultaneously press the power button two times...
Gundabolu SC said:
Or wait I think you should hold the volume up button and simultaneously press the power button two times...
Click to expand...
Click to collapse
That worked Am I able to apply the update from the sdcard? I downloaded it on my phone but can't make it to a PC.... Sorry for asking so much questions I really appreciate the help
Sent from my XT1058 using Tapatalk
mcsqwizzys98 said:
That worked Am I able to apply the update from the sdcard? I downloaded it on my phone but can't make it to a PC.... Sorry for asking so much questions I really appreciate the help
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
I don't think there is any chance of that. Wait till you have the PC and sideload it.
Hopefully it doesn't mess up your phone, since it doesn't seem to want to update on its own.
Steve-x said:
I don't think there is any chance of that. Wait till you have the PC and sideload it.
Hopefully it doesn't mess up your phone, since it doesn't seem to want to update on its own.
Click to expand...
Click to collapse
Oh okay I guess I won't risk it lol yeah idk why it won't get the ota since I'm on stock rogers I untooted a few days ago and haven't had any issues but I just cant get the ota... Damn I can't get a PC for like 2 days lol
Sent from my XT1058 using Tapatalk
mcsqwizzys98 said:
Oh okay I guess I won't risk it lol yeah idk why it won't get the ota since I'm on stock rogers I untooted a few days ago and haven't had any issues but I just cant get the ota... Damn I can't get a PC for like 2 days lol
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
Its only a 5 hour drive to my place from Kelowna, lol.
Steve-x said:
Its only a 5 hour drive to my place from Kelowna, lol.
Click to expand...
Click to collapse
Lol I guess I'm coming over I'm at silver star right Now so add an hour
Sent from my XT1058 using Tapatalk
mcsqwizzys98 said:
Lol I guess I'm coming over I'm at silver star right Now so add an hour
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
Of course you can update... Just go to update via SD card in the recovery and browse for your file!!

Categories

Resources