[Q] problems when switching from 3g to 2g - Nexus S General

Hi There,
I'm a rather new nexus owner and I'm also quite new to the android world.
I own a nexus S wehich I bought second hand, it came with Superaosp 8 preinstalled.
I flashed 8.2 and yesterday 8.6 and I have a rather nasty issue wich I recognized only one week ago.
I'm living in a city with quite good 3g network however in case I go countryside or have bad 3g network my nexus does not switch to 2g automatically.
Even if I try to enable 2g manually it does not find any connection. only a reboot helps and it gets online again.
on the "hidden" menu which I reach with *#*#4636#*#* I set it to WCDMA preferred and this did not help.
Is there anybody who can giveme some hint what else I can do or check?
thanks in advance.

Related

[Q] Poor 3G to 2G handover

Hey there, I enjoy reading this forum but I had little to contribute with as I am an android noob. So unfortunately my first post is a question forced by the fact that something is wrong with my DHD Thank you in advance for your advices!
The problem is - when in areas with low 3G coverage the phone keeps on searching for 3G for too long instant of seamlessly switching to 2G, which often has full signal bars. This way the phone acts as if there was no signal and sends incoming calls to the voicemail even though all it has to do is to switch to 2G as soon as 3G gets too weak.
My previous phones had no problem with this. In my city the 3G quality varies from area to area but the 2G coverage is perfect almost everywhere. So I used to be sure that my phone never really disconnects from the network, it only might have dropped the 3G signal in favor of 2G while keeping the calls and everything.
I know I can disable the 3G and stick to 2G and EDGE but this way using full data capabilities of the phone turns into pain instead of pleasure.
Just to make sure and to show I did my homework, this is NOT:
- the death grip case
- a network related problem /I suppose.../
- a problem with data connection /I have never run into any problems with this/
My questions are:
- is anyone of you experiencing this?
- is there a way to force the phone to hand over the connection from 3G to 2G quicker without "blind spots"?
- does any custom ROM improve this? /I am running the latest stock HTC DHD android 2.2 with Sense/
- is there any hint that android 2.3 gingerbread should fix this issue?
Thank you, hope to find a piece of good advice here!
I`ve found this service menu and I switched the preffered network from WCDMA preferred to GSM AUTO PRL. will see if it helps.
I havent noticed any more problems since I did the switch. I think it helped. I cannot be 100% sure but I think it did the thing for me. I forgot to mention that I also switched networks mode from Auto to European but I think this has nothing to do with the issue.
fortuneman had my answer. To access the service menu on the soft phone keypad enter *#*#4636#*#* and its under Phone Information.
Switching from 2g to 3g works seamlessly. But the other way around doesn't work that well. Nothing to do with the phone. Just the net tech that has its flaws. If your in a call and switch to 2g, the call will most certainly be disconnected.
Sent from my Desire HD using XDA App

[Q] issues with connection speed on rooted inspire 4G/DHD

I am having a strange problem with the connection speed on my inspire 4g. it is always in G or in E, never in H (this refers to the symbols displayed in the info bar, corresponding to Edge, G2 and High Speed respectively). It has nothing to do with my sim (i have put it in another phone, went into H no problems) and it has nothing to do with the network (my friend's cheapo HTC Hero is on H all the time).
I am outside the US. The phone is a HTC inspire 4g, which i bought new and decoded. Here are the steps i have been through:
- I have rooted the phone and initially installed Inspired 4G ROM; This has not solved the problem;
- I have then wiped it and made a clean install with LeeDroid ROM 2.2.3; this has also not solved the problem;
- i have flashed the radio with Radio_12.28g.60.140f_26.05.05.27_M2; still the problem continues
I am running out of ideas, why would such a smart phone not connect to a readily available High speed network?
By The way, i have dialed *#*#4636#*#* - i have tried to set the preferred network type to both WCDMA preferred and various other GPS/CDMA auto PRL, etc - no change. the phone info in this menu shows "network type:GPRS". in my friend's HERO (again same network, same place, same provider, same sim card), if i enter this menu, it says "Network type:HSDPA"
Any ideas? What's going on here?
Did it work prior to updating rom? If not, the carrier that you are using may not be on the 2100mhz/900mhz high speed bands that the dhd uses. I made this mistake and purchased a dhd without checking and I'm stuck with gprs/edge, mainly using 850mhz 2g not 3g ... until I change to a carrier that use 2100mhz/900mhz or upgrade to another phone
inspiredNOT said:
I am having a strange problem with the connection speed on my inspire 4g. it is always in G or in E, never in H (this refers to the symbols displayed in the info bar, corresponding to Edge, G2 and High Speed respectively). It has nothing to do with my sim (i have put it in another phone, went into H no problems) and it has nothing to do with the network (my friend's cheapo HTC Hero is on H all the time).
I am outside the US. The phone is a HTC inspire 4g, which i bought new and decoded. Here are the steps i have been through:
- I have rooted the phone and initially installed Inspired 4G ROM; This has not solved the problem;
- I have then wiped it and made a clean install with LeeDroid ROM 2.2.3; this has also not solved the problem;
- i have flashed the radio with Radio_12.28g.60.140f_26.05.05.27_M2; still the problem continues
I am running out of ideas, why would such a smart phone not connect to a readily available High speed network?
By The way, i have dialed *#*#4636#*#* - i have tried to set the preferred network type to both WCDMA preferred and various other GPS/CDMA auto PRL, etc - no change. the phone info in this menu shows "network type:GPRS". in my friend's HERO (again same network, same place, same provider, same sim card), if i enter this menu, it says "Network type:HSDPA"
Any ideas? What's going on here?
Click to expand...
Click to collapse
Did you mange to sort this out? I have a similar problem with DHD. It seems to be stuck on G. When I first installed lee droid ROM it was working fine and I got H appearing and fast download speeds ( used traffic monitor to prove the speeds) all of a sudden it seems to be stuck on the G icon.
I have has this issue for a while, i have checked all the setting on the phone (*#*#4636#*#* and connection settings). I thought it could have been my sim, I tested my mates sim on my phone( same network). when I put my sim back it I got the H network again. This only lasted for a few days and it has now gone again.
I have done tests using traffic monitor I only get speeds between 21 Kbit/s on the mobile network. In my archive I can see when I was connected to the H network , I was downloading 289 Kbit/s.
I have not flashed the radio yet as im not sure which one I should be using but surely it cant the radio as it was working on the H network twice.
I am running lee droid 2.6.35.14 Ace 3.2.1
band base version: 12.28b.60.140eu_ 26.03.02.26_M
Any ideas why this is happening?
I have that same issue STUCK ON EDGE
I need to revive this thread. I used ace hack kit released oct.27 and hack went perfect. I installed ARHD 6.1.3 and i couldnt get on H and also the rom itself was unresponsive and would do all kinds of crazy things. I downgraded to 6.1.1 which i had put on my brothers phone and worked great but exact same issue on the new one here. So then I tried old faithful ARHD 5.1.11 and the rom works perfect but im still stuck on edge network. I get full signal almost all the time in a 4G area but only get edge. Im set on GSM/WCDMA auto, I tried to go WCDMA only and i lost all signal and it switched itself back to auto. Im totally outta ideas. Im in canada, could it be that this phone is the Euro DHD? How can I check?

[Q]No 3g Signal, only Edge, help

So I got this phone from my friend asking to help him because quite recently his phone would start dropping calls and losing signal. He was running completely stock on Android 2.2 He asked if I could take a look and try to get it working. So after doing some researching in the sub I found the rooting app and decided to put CM7.1 on his phone. Everything works great now considering he couldn't get a call to go through but it only has edge and that's only after waiting a couple minutes after boot. There isn't an option in CM7 to choose WCDMA but it does have the check box for 2g only. Anyway calls go through fine now as well as texts but god Edge is so slow. WiFi works fine as well. Anyway What on earth do I do to get 3g working?
I have also done the Defy Baseband switcher, everything but T-Mobile 3.4.2 -107-9 works. The only thing I can think of doing next is having him switch out his sim card through T-mobile. If someone else has an idea I would love to hear it cause I am just spinning my wheels.
Also I did install CM7.2 and it had the option for WCDMA which forced the 3g icon but it never would do anything about data for it. It would just sit at a webpage and timeout. Anyway back at CM7.1 and waiting to see what happens.
Thanks ahead of time for the help guys.
Anyone with any other ideas or something simple I am missing?
I have a very similar problem. I have installed WhiteRabbitEddtion 1.5 for Defy+ MB526 (based on CM7.2 I think). When it tries for operate on 3G, it works for a while, then just loses the network. It looks like the receiver goes deaf or something. If I select 2G only, it seems to work fine. But then restricted to EDGE data rates -- bummer.
My network operator is Telstra (Australia) - 850/2100 MHz.

UMI Super 3G instead of 4G

Hi,
did anyone using Umi Super have any problems with using 4G at 800MHz? Im on giffgaff and even though Umi Super is supposed to work at 4G under 800MHz (thats what the specification states) i cant manage to make it work. I have perfect 4G coverage, 4G sim, 4G tariff, even gave my sim to a friend with S7 edge and it worked on his phone. Maybe new update will fix that? I tried with different sim from different operator (LYCA) and it works but 4G in LYCA is at 2100MHz so I didnt really check the 800. I tried everything and still nothing. Did anyone have similar problem?
I actually bought 2 phones of the same model so I decided to check if 4G worked on the other one and as I put the sim card in I just remembered something and realized same thing happened with my phone. When I put the SIM card in for the first time it DID automatically go to 4G, ok, when I looked for available networks it found O2 4G, granted BUT!!! when i got to "preferred network type" there is only 3G to pick, and THE MOMENT I PICK IT there is not possible to go back. Every network I find from that moment is only 2G or 3G. Now i reckon that a software problem right? See attachments
It is a software bug and I think I sort it out after flashing the phone. For now I sorted out the problem using Networks app by Philipp Mangalov and switching network to LTE/GSM auto
Well it seems the data part of the UMI SUPER is not so super, is it? I face a similar problem but worse. The 4G band of 800 doesn't work(despite being advertized by UMI as supported) but luckily the band of 2100 works without any issues. The problem comes when I'm out of 2100 band coverage and phone must switch to 3G - then I lose all data connectivity completely. So basically whenever I'm out of 4G 2100 coverage(which is often) I am without any connectivity! Anyone facing the same? Solution?
Indopilot said:
Well it seems the data part of the UMI SUPER is not so super, is it? I face a similar problem but worse. The 4G band of 800 doesn't work(despite being advertized by UMI as supported) but luckily the band of 2100 works without any issues. The problem comes when I'm out of 2100 band coverage and phone must switch to 3G - then I lose all data connectivity completely. So basically whenever I'm out of 4G 2100 coverage(which is often) I am without any connectivity! Anyone facing the same? Solution?
Click to expand...
Click to collapse
I only have 3G and the phone shows that I have internet, but when I try to actually use the data it just says no connection on apps.
zbysogi said:
Hi,
did anyone using Umi Super have any problems with using 4G at 800MHz? Im on giffgaff and even though Umi Super is supposed to work at 4G under 800MHz (thats what the specification states) i cant manage to make it work. I have perfect 4G coverage, 4G sim, 4G tariff, even gave my sim to a friend with S7 edge and it worked on his phone. Maybe new update will fix that? I tried with different sim from different operator (LYCA) and it works but 4G in LYCA is at 2100MHz so I didnt really check the 800. I tried everything and still nothing. Did anyone have similar problem?
Click to expand...
Click to collapse
I don't have this issue at all. My UMi Super connects perfectly to my 4g network under 800MHz without an issue here in Uganda. You can install the MTK Engineering app from the play store and check the band compatibility on ur device and you can also set the mode using the same app under android settings.
You could also try updating to the latest OTA which is 20160810 or the one before it by downloading the files from forum post here and saving them to ur phone and updating manually if you don't have the current OTA
sachak said:
I don't have this issue at all. My UMi Super connects perfectly to my 4g network under 800MHz without an issue here in Uganda. You can install the MTK Engineering app from the play store and check the band compatibility on ur device and you can also set the mode using the same app under android settings.
You could also try updating to the latest OTA which is 20160810 or the one before it by downloading the files from forum post here and saving them to ur phone and updating manually if you don't have the current OTA
Click to expand...
Click to collapse
GravityBox is a perfect solution for this problem. You can set up an icon in notification bar allowing You to toggle between 2G/3G/4G
zbysogi said:
I actually bought 2 phones of the same model so I decided to check if 4G worked on the other one and as I put the sim card in I just remembered something and realized same thing happened with my phone. When I put the SIM card in for the first time it DID automatically go to 4G, ok, when I looked for available networks it found O2 4G, granted BUT!!! when i got to "preferred network type" there is only 3G to pick, and THE MOMENT I PICK IT there is not possible to go back. Every network I find from that moment is only 2G or 3G. Now i reckon that a software problem right? See attachments
Click to expand...
Click to collapse
same problem
This is indeed a software issue, one I have come accross many times - using an app to toggle between the service types is the best workaround!
There are many apps that work to resolve this, some great ones have already been mentioned.
TerryWebbs said:
This is indeed a software issue, one I have come accross many times - using an app to toggle between the service types is the best workaround!
There are many apps that work to resolve this, some great ones have already been mentioned.
Click to expand...
Click to collapse
Could you tell me some app that resolve this?
Thanks
I've got a UMI Super and had this issue as well:
try this app:
Network by Philipp Mangelow
https://play.google.com/store/apps/details?id=de.mangelow.network
4g Umi Super on Giff Gaff
You need Giff Gaff settings in access point name. If you try and use O2 4g it doesn't work even though Giff Gaff uses O2 network. Settings are really easy to input but MUST be Giff Gaff not O2.
zbysogi said:
I actually bought 2 phones of the same model so I decided to check if 4G worked on the other one and as I put the sim card in I just remembered something and realized same thing happened with my phone. When I put the SIM card in for the first time it DID automatically go to 4G, ok, when I looked for available networks it found O2 4G, granted BUT!!! when i got to "preferred network type" there is only 3G to pick, and THE MOMENT I PICK IT there is not possible to go back. Every network I find from that moment is only 2G or 3G. Now i reckon that a software problem right? See attachments
Click to expand...
Click to collapse
There is a fix on rooted phones by using GravityBox and switching between 2G/3G/4G
Thread can be closed.
4G on a Umi Super on GiffGaff.
zbysogi said:
There is a fix on rooted phones by using GravityBox and switching between 2G/3G/4G
Thread can be closed.
Click to expand...
Click to collapse
All that's needed is GiffGaff settings inputing manually. Very easy to do. O2 settings that the phone recognises when a GiffGaff sim is used WILL NOT WORK. The Network is O2 but the APN settings for GiffGaff are totally different.
All you guys that think you know what you're doing obviously don't.
No need to Root or use GravityBox or any other App.
Maz Jones said:
All that's needed is GiffGaff settings inputing manually. Very easy to do. O2 settings that the phone recognises when a GiffGaff sim is used WILL NOT WORK. The Network is O2 but the APN settings for GiffGaff are totally different.
All you guys that think you know what you're doing obviously don't.
No need to Root or use GravityBox or any other App.
Click to expand...
Click to collapse
Well said. I just shake my head in despair when I see how totally clueless people try to be teachers and Internet gurus with very limited knowledge about the task at hand. These comments should come with warning stickers.
For those who want to be able to switch between 3G/4G and LTE only, use this nifty little APK that I've attached below. It will allow you to enter engineer mode without using the dial code.
Hi
This is a bug implemented in Android 7.0.
I had the same.
1 Just force in your parameters 2G/3G networks
2 wait for network authentification (no more excalamtion mark)
3 go back to 4G
Every thing will be OK to next switch off or plane mode.
Rgds,
LTE band 7 (2600) not working
I recently received my new Umi Super and updated to the last firmware V7.01_20170413, everything works fine except for the 4G. I live in an area where band 7 (2600) is available but the phone can't connect to it. Of course, my preferred network type is set to 4G/3G/2G (auto).
I read a lot about the issue on the internet but I can't find a solution.
I checked the BandMode on the phone by dialing *#*#3646633#*#*, band 7 is included and checked. However, when I tried to remove the other LTE bands and keep only band 7, I got a message explaining that the list can't be empty ("Failed. The band is changed from not null to null, it is illegal"), though the list was not completely empty because band 7 was still selected.
Also, I tried to change the radio band by dialing *#*#4636#*#*, but process com.android.phone stopped working when I pressed "select radio band", even after I cleared cache in phone and sim apps.
Can anyone tell me how to fix the problem and get connected to 4G.
BTW, Network by Philipp Mangelow is not available anymore. Switching between 3G/2G and 4G/3G/2G settings doesn't fix the issue. I tried the giffgaff settings, but the APN gets deleted as soon as I try to save it.
Thanks
bemo00 said:
I recently received my new Umi Super and updated to the last firmware V7.01_20170413, everything works fine except for the 4G. I live in an area where band 7 (2600) is available but the phone can't connect to it. Of course, my preferred network type is set to 4G/3G/2G (auto).
I read a lot about the issue on the internet but I can't find a solution.
I checked the BandMode on the phone by dialing *#*#3646633#*#*, band 7 is included and checked. However, when I tried to remove the other LTE bands and keep only band 7, I got a message explaining that the list can't be empty ("Failed. The band is changed from not null to null, it is illegal"), though the list was not completely empty because band 7 was still selected.
Also, I tried to change the radio band by dialing *#*#4636#*#*, but process com.android.phone stopped working when I pressed "select radio band", even after I cleared cache in phone and sim apps.
Can anyone tell me how to fix the problem and get connected to 4G.
BTW, Network by Philipp Mangelow is not available anymore. Switching between 3G/2G and 4G/3G/2G settings doesn't fix the issue. I tried the giffgaff settings, but the APN gets deleted as soon as I try to save it.
Thanks
Click to expand...
Click to collapse
You may try to force 3G and then try to force 4G
You may try to user another IMEI number from a UMI device with 2600 support (of course backup/write down the original one before just in case)
http://www.ucc.co.ug/data/imei/2
After the update to Nougat 7.x how long does it take to do a full recharge?
Do you still have fast charge feature (< 1 hour) or do you lost it like all users reported so far?
What about your GPS? Do you have a fast fix after cleaning history and is it reliable (not losing signal often?).
SimurghXDA said:
You may try to force 3G and then try to force 4G
You may try to user another IMEI number from a UMI device with 2600 support (of course backup/write down the original one before just in case)
http://www.ucc.co.ug/data/imei/2
After the update to Nougat 7.x how long does it take to do a full recharge?
Do you still have fast charge feature (< 1 hour) or do you lost it like all users reported so far?
What about your GPS? Do you have a fast fix after cleaning history and is it reliable (not losing signal often?).
Click to expand...
Click to collapse
Is it safe to change the IMEI number? and where can I find another number for a UMI device?
GPS is working fine, it fixes pretty fast, but I'm not sure about interruption in the signal because I haven't used it enough yet

Network Switcher App

Hello, I'm searching for a working (root) App that switches the network mode, for example to 3G or LTE only. ZTE has only limited options in Stock settings... I live in a town Where 3g and LTE are possible but the axon does not switch the network Mode from 2G up really quick. And 2G is a pain here.
Thank you!
This one should work, but it is not free unfortunately. I know for a fact that it works on my Nexus 5X and 6 with Android 7.1.
https://play.google.com/store/apps/details?id=com.cygery.togglenetworktype
Edit: I just tried to use this on my Axon 7 and had no luck...so my apologies for mentioning this app as it doesn't seem to work for this device, at least on Stock. Also, ZTE seems to have screwed the pooch on the Testing Menu mentioned below - almost all of the various network types have been disabled from use it seems, aside from GSM only, Global auto, and LTE/CDMA/UMTS auto (PRL). On my Verizon SIM I also can't force 1X only...nor EvDO only (though admittedly this wouldn't be of much use anyway). Kind of annoying that ZTE has done this.
*#*#4636#*#* in the dialer does the same thing. Works in both stock and los.

Categories

Resources