Hello there,
I have Atrix 4.1.83 rooted by GingerBreak. It work correctly before I install Motoptimizer and use a tweak 3D patch. After that phone rebooted and now stuck on Motorola logo. Also a red indicator is blinking for some time, after that screen goes black, green indicator appears and after that the story repeats. The battery level when it happenned was 28%.
How can I restore it?
Now I'm in Android Recovery and watch exclamatory sign in triangle with green robot.
I've done factory reset but everything is the same now
Sounds like time to flash sbf.
Related
I am one of the many Droid Pro users that did not receive the Gingerbread update before Verizon pulled the OTA update. I decided tonight that I would try to update with an update.zip file using the recovery method. The install appeared to be going well right up until the end. At around 90% or so the update failed and abandoned the update, I selected to restore the original firmware and restarted the phone. The phone restarted and this time the Motorola icon had changed from the normal white icon to a red icon, I'm assuming that something changed. The phone then went black, power still applied to the screen but just black. I could hear the phone starting up as it made its characteristic DROID noise and the keyboard and screen buttons illuminated, however nothing shows up on the screen, it still remains black.
I have tried numerous methods to reset or restore but I am unable to get anything to display on the screen other than the red icon as the device powers up. Any help would be greatly appreciated.
should flash the stock firmware.
Hi all,
After flashing some custom roms (and since flashing completely back to stock), whenever I charge the phone while it's turned off it gets stuck on the grey battery logo screen (with the "loading" circle in the middle) even when I pull the charger out. At this point I need to pull the battery before I can turn the phone on.
When I first got the phone it used to show a green animated battery logo and when pulling out the charger it would turn off again.
Does anyone know what partition this problem is related to and how to flash it back to stock? I'm running TWRP recovery...
It's not the biggest issue in the world but I'd like to fix it all the same.
Thanks
re: stuck
sirwiggus said:
Hi all,
After flashing some custom roms (and since flashing completely back to stock), whenever I charge the phone while it's turned off it gets stuck on the grey battery logo screen (with the "loading" circle in the middle) even when I pull the charger out. At this point I need to pull the battery before I can turn the phone on.
When I first got the phone it used to show a green animated battery logo and when pulling out the charger it would turn off again.
Does anyone know what partition this problem is related to and how to flash it back to stock? I'm running TWRP recovery...
It's not the biggest issue in the world but I'd like to fix it all the same.
Thanks
Click to expand...
Click to collapse
Why not just go into cwm or twrp recovery and do a "factory reset", that will should fix the problem.
I had the same issue at one time and done a factory reset, and it solved the problem for me.
Good luck!
Same here. Did u find any solution?
Btw. what are your specs?
I am on i9505, FoxHound 0.7, KT-SGS4 Kernel and CWM Recovery.
Okay um I don't know if this is the right place to be so sorry if its wrong. My phone when oi got it from my sister was incredibly slow so I decided to so a factory reset to see if that would work, I did alittle but not a lot. After awhile of not using my phone being away on holiday and everything so I haven't used it in about 5-6 weeks, I turned it on after I charged it for a bit and I know it was charging because of the white LED that lights up when charging but when I wen to turn it on it gets past the Motorola logo then to the T with the blue background logo and then shuts off and doesn't properly start up. My father suggested I get a new battery for it but I don't know if it will fix the problems. Any ideas? Help?
Do a factory reset + cache wipe from stock recovery once. If it doesn't work, then use rsdlite to flash an sbf (refer to the defy beginners guide for step by step instructions)
Sent from my Nexus 5 using Tapatalk
Starting from the beginning: My phone crashed restarted several times and then black screen with blue led. Then I had t wait for the battery to die because none of the home power vol, power vol keys worked. Eventually got it into recovery mode selected wipe cache restarted same problem.
Now the phone even boot into recovery. It just stays on the blue screen saying "Installing system update" . The little recycling loading icon spins a couple times then its just stuck. Resorted to losing everything and installed smart switch and did emergency restore. Flashed a few times still no joy. Took it to shops they charged it turned it on and its reset to factory. Got it running again, only for it to go into a boot loop. Curious if it was actually fixed, i booted into recovery mode same issue and now back to square one. (I did let the battery die and started it up, came to the home screen and it started rebooting again to black screen and blue LED again.)
I do intend on sending it back but I am wondering could be that the recovery partition is corrupted?
Hey guys,
I wanted to remove the inscription that pops ups while using this thread: https://forum.xda-developers.com/axon-7/themes/remove-inscription-loader-unblocked-t3605213. My phone wasn't encrypted, but after flashing the zip my phone just wouldn't boot and froze at the boot animation. The screen turned black and the LED started blinking red en green. Does anyone have an idea how to fix this and what the problem is exactly?
Thanks a lot!
cedric2219 said:
Hey guys,
I wanted to remove the inscription that pops ups while using this thread: https://forum.xda-developers.com/axon-7/themes/remove-inscription-loader-unblocked-t3605213. My phone wasn't encrypted, but after flashing the zip my phone just wouldn't boot and froze at the boot animation. The screen turned black and the LED started blinking red en green. Does anyone have an idea how to fix this and what the problem is exactly?
Thanks a lot!
Click to expand...
Click to collapse
I don't know if you can't fix the phone in that state. The only hope you have is that you can enter EDL mode by 4th category brick repair manual. There is another way that involves draining the battery and attempting to enter FTM mode (vol down and power) but only a couple of people seemingly could do this.
You had been warned on that thread anyways.