So my SD card is partitioned to fat32+ext2+swap, yet my apps still being stored and run from the phone since im running out of storage.
Is there an app that will move my apps to the sd card and run the from there?
What rom are you using?
The latest MyHero ROM
bump**
help =(
I don't use hero ROM's so I'm not very familiar with them. Do they have automatic apps2sd? (assuming your sdcard is partitioned)
can you help me out too? im running on manup's eclair 2.1 rom
Rosco911 said:
So my SD card is partitioned to fat32+ext2+swap, yet my apps still being stored and run from the phone since im running out of storage.
Is there an app that will move my apps to the sd card and run the from there?
Click to expand...
Click to collapse
running out of storage on what? sdcard? or phone? i highly doubt phone... and if its on sdcard, your ext3 partition is probably too small or being used up by all of the heros **** that it stores there, as i just read heros do. include the sizes of your partitions and link to thread of hero rom.
I just pulled this off the MyHero thread located here
My Apps 2 sdcard patch: (no ext2/ext3 partition required, it using your sdcard's vfat partition.)
It work for the apps you install from android market or by "adb install".
The "app2sdcard" patch will create a "app" folder in your sdcard. Then copy apps from /data/app to /sdcard/app and make a symbol link to there.
The "app2phone" patch will copy apps in the sdcard "app" folder back to your phone and delete from your sdcard.
Or you may want to do it yourself in recovery mode with following commands :
Code:
mount /sdcard
mount -o rw /data
mkdir /sdcard/app
cp -a /data/app/* /sdcard/app/
rm -rf /data/app
ln -s /sdcard/app /data/app
If I understand this right, it does not use an ext, but stores the apps on your fat32.
Did you read through this thread and try that?
apps on sd
Is there any way to update apps that run from sd card?
Apps that run from your sd card runs normally as if it was on your phone, so it updates normally also.
Unless you flash over a new rom and backup and restore your apps, then they don't show up in the market on the new rom. For that, I use atrackdog to keep my apps not showing in the market up to date.
Hi all, originally intending to post this tutorial to Ideos S7 Android Development but got a nice greeting from xda-developers.com unallowing newbies to post there
So I just got a brand-new-in-a-box, dead cheap, Ideos S7 tablet -- my first android tablet, and my second android device. I brought my last device about 2 years ago, a G1 that I only kept for a week and sold it afterwards. I was thinking that at that time Android isn't ready yet for replacing my E71.
Back to the Ideos S7, mine is already preloaded with TRZ-mod-0.2 ROM, which is nice. However, I had some issue with wireless network. Whenever I disable my wifi, I would ge trouble activating it as it constantly disabled by itself. Thus, I decided to go back to available stock ROM. Long story short, I've chosen the Froyo 2.2.2 Sweden coded S7V100R001C63B110, and made myself comfortable with repeating Huawei's flashing process.
The firmware seems more stable, and does not have the wireless network activation/deactivation issue. Stock ROM lover anyone
However, the stock ROM doesn't have apps2d+ or whatever that was called, to extend the internal storage. 137MB of free space is really pity for such device. I couldn't run Data2Ext* script successfully, as the default shell /system/bin/sh doesn't seems to support square brackets on scripts conditional parts. Busybox 1.18 supports it, but somehow it would cause all the commands executed in the script to ran by Busybox, causing "applet not found" errors. The other option would be Link2SD, which could probably saved me 10+ hours of hacking. It had its drawback though, the current version on the market expects the extended internal tablet storage partition to reside on the external SD card. Some hacking to mount the internal SD partition works, but not sure whether it would got correctly mounted on boot.
Also, the most important thing: nothing feels better than looking at "Available space" on "Internal tablet storage" of 5.5GB
So here it is, the tutorial for extending the internal storage. Most of the information used are gathered from various sources, and rewritten here for your enjoyment!
REQUIREMENTS:
=========
a) All hardware: Ideos S7 -- should work on Slim as well, data cable, charger, a living being..
b) Rooting -- I've used Gingerbreak from the market
c) Terminal Emulator -- Android Terminal Emulator works fine. Irritating blue background though.
d) Busybox -- 1.18 version is working fine
e) Root explorer -- Optionally used, for easier file editing and copying.
STEPS:
=========
0) Backup your data, as all data in internal storage will be lost!
---------
Well honestly I didn't do this as I got my contacts and mail synced on the internet. My S7 only got 5 days of lifetime so not much data there yet. Sorry no guide on how to do this
1) Partition the internal SD (or external SD card if you intend to do so).
---------
It is recommended to use a good class of memory card when using external SD card for the tablet storage partition.
There's possibly partitioning tools available for the architecture, but I did it with EASUS Partition Master on a Windows system. Mac OS's Disk Utiliy should work as well. Don't worry too much about the partition type, we'll reformat it later with busybox later anyway.
To partition the internal (or external) SD card, connect your data cable to your phone. When the USB connection notification came up, activate the USB storage mode. You don't need to install the Huawei S7 (or adb) drivers.
Fire up your partitioning application, and identify your storage. Delete (or) resize the existing FAT partition. Create another primary partition afterwards, with ext2 filesystem. ext3 and ext4 isn't supported in the stock ROM, so you probably have to either install a kernel module for the ext3,4 or replace your boot.img. Hey but that's not going to be a stock ROM
2) Root the device
---------
Install Gingerbreak from the market. Enable USB debugging in Settings -> Application -> Development, or else it won't work. Run Gingerbreak, root your device! The device will restart after successful process, and you are ready to modify your root filesystem.
3) Prepare the required tools
---------
You'll optionally need busybox to format and edit the files. Copy over the busybox binary file to /system/xbin/. The terminal login path would automatically points there so you can run busybox from anywhere inside the terminal.
4) Prepare the new data directory
---------
Fire up your terminal emulator. You'll need to be logged in as root to do the whole operation mentioned. Thus, type in:
Code:
su
Mount the new partition you've prepared on step (1). For internal SD, it's going to be /dev/block/mmcblk0p2 device, or for external SD, /dev/block/mmcblk1p2. You can also use other shorthand such as /dev/block/vold/179:2. But for simplicity, I'll use mmcblk*p* throughout the tutorial.
Prepare the mount point for your prepared data partition, and mount it. If it's currently mounted, unmount it first.
Code:
umount /dev/block/mmcblk0p2
mkdir /system/sd
You can also format the partition now if you didn't specify the partition type during the partition creation.
Code:
busybox mke2fs -m0 -b4096 /dev/block/mmcblk0p2
Now mount the extended data partition.
Code:
mount -t ext2 /dev/block/mmcblk0p2 /system/sd
We'll still need to be able to access the original data partition now and later, so, prepare the mount point and mount it as well.
Code:
mkdir /system/internal
mount -t yaffs2 /dev/block/mtdblock4 /system/internal
At this stage, you'll need to copy over all files inside the original /data directory to your new sd directory. You'll also need to make sure that the permissions isn't changed during the process. To do this, just tar the entire original data directory to your new one.
Code:
cd /system/internal
busybox tar -cvf /system/sd/old-data.tar *
cd /system/sd
busybox tar -xvf old-data.tar
busybox rm old-data.tar
The initialization for the new data directory mounting in the boot process does not modifies the boot image's init.rc. Thus, it seems that the initialization process is called after the radio initialization. I can't get my GSM to work without this step. We'll need to symbolic-link back the /system/sd/radio directory to the original internal storage /data/radio directory. And remember that on the boot process, we'll need to mount /system/internal *before* /system/sd.
Code:
cd /system/sd
busybox rm -rf radio
ln -s /system/internal/radio /system/sd/radio
After fiddling for several hours, I realized that the date and time settings gets reset on each boot. Fixed by symlinking the /data/date.time back to the internal storage.
Code:
cd /system/sd
busybox rm -rf date.time
ln -s /system/internal/date.time /system/sd/date.time
5) Prepare the boot init script
---------
The Froyo boot process runs init.rc script, which is replaced by the boot.img when system boots. So we can't put our new /data directory mount commands there, unless we extract, unpack, modify, repack the boot.img. Ok so I decided that modifying boot.img will be the last step if I can't get it working without it. There must be an easier way!
Also, there aren't any rc.d, rc3.d, bla bla directory in which we can put our custom initialization script.
Luckily, there is a script that is called from the init.rc script during boot, which is stored on the root filesystem and can be customized. It's called /system/etc/install-recovery.sh. Thus, we'll put the initialization script there. If you already got a /system/etc/install-recovery.sh, you can just add our initialization script in the beginning of the. Alternatively, you can create a separate script to perform init, and call it from your modified /system/etc/install-recovery.sh.
There will be drawback, for example, it seems that the script is called after radio initialization, so we'll need to use the old /data/radio directory from the original /data directory, prepared on step (4).
So now you'll need to create (or copy) the install-recovery.sh script. You can use vi from the busybox, or easier is to just copy and paste the install-recovery.sh script provided in this post. In case you're a vi expert, fire up these commands. Don't forget to remount the root filesystem as rw first!
Code:
busybox vi /system/etc/install-recovery.sh
Write in the install-recovery.sh script:
Code:
#!/system/bin/sh
mount -t yaffs2 /dev/block/mtdblock4 /system/internal
mount -t ext2 /dev/block/mmcblk0p2 /system/sd
mount -o bind /system/sd /data
Don't forget to set executable and readable attribute at least for root user, or else the system can't run the script!
Code:
chmod 755 /system/etc/install-recovery.sh
So now you're ready to reboot the system. Double check the install-recovery.sh script, make sure all commands mounts the partition exactly to where you intend it.
6) Reboot your Ideos S7!
---------
Reboot and enjoy the trendemous increase on your internal tablet storage
WARNING!!! Do not attempt to perform factory data reset while running with /data mounted. It seems that S7 will format the /data partition as yaffs2, not sure as I haven't checked it. But it worth to try to change the install-recovery.sh script to mount the data partition as yaffs2, and then performing factory data reset.
Sorry I can't post either an image or attachment yet
watch_mania said:
Sorry I can't post either an image or attachment yet
Click to expand...
Click to collapse
Btw, if someone with account capable of posting images and files would like to help, I can send the image links and files to your e-mail, so you can post it here
Should've post the title with [HOWTO] prefix. Sorry about the newbie-ish thing
Hey, sure i can post them! I've set up a site for the "Install GNU/Linux" anyway. I'll be looking to follow this howto sometime in the future. Tell ya what tho, i'd have saved 10+ hours hacking had i known gingerbreak was in market also!
threader said:
Hey, sure i can post them! I've set up a site for the "Install GNU/Linux" anyway. I'll be looking to follow this howto sometime in the future. Tell ya what tho, i'd have saved 10+ hours hacking had i known gingerbreak was in market also!
Click to expand...
Click to collapse
Unfortunately I don't own the Ideos anymore
Good luck on your site!
can you make a simple tutorial to us? i need it badly.
Could you help me.... do I have to label the drives as "mmcblk..." because it's not recognizing the directory
---------- Post added at 12:22 PM ---------- Previous post was at 12:21 PM ----------
I'm stuck after entering su in the emulator...please help
Nice guide
work perfectly on S7 slim
i do all the steps using sshdroid and putty so i can use cut&paste from web page
the only think that i've to add is mount syster as readwrite:
mount -o rw,remount -t yaffs2 /dev/block/XXXXXXX /system
Thanks for this guide i will do the same on all my device
i'm triing to increase internal memory on stock rom.
I successfully done on S7 slim (i found i guide writen by watch_mania) but on Vodafone Smart i've some trouble (i use sshdroid and putty).
I do the following step :
1) Partiton the external SD with two filesystem the the first one FAT32 the second one ext2
this is the output of fdisk :
/system/sd # fdisk -l /dev/block/mmcblk0 Disk /dev/block/mmcblk0: 7969 MB, 7969177600 bytes
255 heads, 63 sectors/track, 968 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System
/dev/block/mmcblk0p1 1 509 4088511 83 Linux
/dev/block/mmcblk0p2 510 968 3686917+ b Win95 FAT32
2) mount system as read-write and create new mount point
mount -o rw,remount -t yaffs2 /dev/block/mtdblock4 /system
mkdir /system/sd
mkdir /system/internal
3) format ext2 partition created at 1)
mke2fs -m0 -b4096 /dev/block/mmcblk0p1
4) mounting the "original" /data on /system/internal and new ext2 partition on /system/sd
mount -t yaffs2 /dev/block/mtdblock6 /system/internal
mount -t ext2 /dev/block/mmcblk0p1 /system/sd
5) copy the content on "original" /data on /system/sd
cd /system/internal
tar -cvf /system/sd/old-data.tar *
cd /system/sd
tar -xvf old-data.tar
rm old-data.tar
6) create boot init script
vi /system/etc/install-recovery.sh
and write inside :
#!/system/bin/sh
mount -t yaffs2 /dev/block/mtdblock6 /system/internal
mount -t ext2 /dev/block/mmcblk0p1 /system/sd
mount -o bind /system/sd /data
Originally in the guide for S7 slim you have to do :
cd /system/sd
rm -rf radio
ln -s /system/internal/radio /system/sd/radio cd /system/sd
rm -rf date.time
ln -s /system/internal/date.time /system/sd/date.time
BUT if i try to do that the device does not recognize the sim.
If i try to don't do that the device loop during boot.
on S7 Slim in /system/internal/radio i found this file :
srwxrwxrwx 1 0 0 2048 Dec 31 06:49 qmux_connect_socket
the same file on vodafone smart is located in /system/internal/local/tmp/
but if i try to link it does not work and the device loop.
Will this also work on altek A14 LEO(an Android 2.1 phone)? It has less than 100MB internal storage, although it built-in dtapps2sd with the newest stock firmware, "/data/data" is still stored in internal storage. Because the version of dtapps2sd in stock firmware is not latest version, no "/data/data" mount on SD-EXT support. And I can't upgrade dtapps2sd myself due to no reflash tool for this phone.
Thank for the niec post, i,ll try it shortly
Increasing Internal Memory
Hi,
Has anyone tried a superb "setinstalllocation-xxx.apk" available in xda-developers.
I have been using it and it is really good. But as mentioned by watch-mania that 139 or 140 MB of available storage is a pity.
Your device must be rooted to use the above apk. You can successfully use gingerbreak available from this excellent forum.
more info
watch_mania said:
Hi all, originally intending to post this tutorial to Ideos S7 Android Development but got a nice greeting from xda-developers.com unallowing newbies to post there
So I just got a brand-new-in-a-box, dead cheap, Ideos S7 tablet -- my first android tablet, and my second android device. I brought my last device about 2 years ago, a G1 that I only kept for a week and sold it afterwards. I was thinking that at that time Android isn't ready yet for replacing my E71.
Back to the Ideos S7, mine is already preloaded with TRZ-mod-0.2 ROM, which is nice. However, I had some issue with wireless network. Whenever I disable my wifi, I would ge trouble activating it as it constantly disabled by itself. Thus, I decided to go back to available stock ROM. Long story short, I've chosen the Froyo 2.2.2 Sweden coded S7V100R001C63B110, and made myself comfortable with repeating Huawei's flashing process.
The firmware seems more stable, and does not have the wireless network activation/deactivation issue. Stock ROM lover anyone
However, the stock ROM doesn't have apps2d+ or whatever that was called, to extend the internal storage. 137MB of free space is really pity for such device. I couldn't run Data2Ext* script successfully, as the default shell /system/bin/sh doesn't seems to support square brackets on scripts conditional parts. Busybox 1.18 supports it, but somehow it would cause all the commands executed in the script to ran by Busybox, causing "applet not found" errors. The other option would be Link2SD, which could probably saved me 10+ hours of hacking. It had its drawback though, the current version on the market expects the extended internal tablet storage partition to reside on the external SD card. Some hacking to mount the internal SD partition works, but not sure whether it would got correctly mounted on boot.
Also, the most important thing: nothing feels better than looking at "Available space" on "Internal tablet storage" of 5.5GB
So here it is, the tutorial for extending the internal storage. Most of the information used are gathered from various sources, and rewritten here for your enjoyment!
REQUIREMENTS:
=========
a) All hardware: Ideos S7 -- should work on Slim as well, data cable, charger, a living being..
b) Rooting -- I've used Gingerbreak from the market
c) Terminal Emulator -- Android Terminal Emulator works fine. Irritating blue background though.
d) Busybox -- 1.18 version is working fine
e) Root explorer -- Optionally used, for easier file editing and copying.
STEPS:
=========
0) Backup your data, as all data in internal storage will be lost!
---------
Well honestly I didn't do this as I got my contacts and mail synced on the internet. My S7 only got 5 days of lifetime so not much data there yet. Sorry no guide on how to do this
1) Partition the internal SD (or external SD card if you intend to do so).
---------
It is recommended to use a good class of memory card when using external SD card for the tablet storage partition.
There's possibly partitioning tools available for the architecture, but I did it with EASUS Partition Master on a Windows system. Mac OS's Disk Utiliy should work as well. Don't worry too much about the partition type, we'll reformat it later with busybox later anyway.
To partition the internal (or external) SD card, connect your data cable to your phone. When the USB connection notification came up, activate the USB storage mode. You don't need to install the Huawei S7 (or adb) drivers.
Fire up your partitioning application, and identify your storage. Delete (or) resize the existing FAT partition. Create another primary partition afterwards, with ext2 filesystem. ext3 and ext4 isn't supported in the stock ROM, so you probably have to either install a kernel module for the ext3,4 or replace your boot.img. Hey but that's not going to be a stock ROM
2) Root the device
---------
Install Gingerbreak from the market. Enable USB debugging in Settings -> Application -> Development, or else it won't work. Run Gingerbreak, root your device! The device will restart after successful process, and you are ready to modify your root filesystem.
3) Prepare the required tools
---------
You'll optionally need busybox to format and edit the files. Copy over the busybox binary file to /system/xbin/. The terminal login path would automatically points there so you can run busybox from anywhere inside the terminal.
4) Prepare the new data directory
---------
Fire up your terminal emulator. You'll need to be logged in as root to do the whole operation mentioned. Thus, type in:
Code:
su
Mount the new partition you've prepared on step (1). For internal SD, it's going to be /dev/block/mmcblk0p2 device, or for external SD, /dev/block/mmcblk1p2. You can also use other shorthand such as /dev/block/vold/179:2. But for simplicity, I'll use mmcblk*p* throughout the tutorial.
Prepare the mount point for your prepared data partition, and mount it. If it's currently mounted, unmount it first.
Code:
umount /dev/block/mmcblk0p2
mkdir /system/sd
You can also format the partition now if you didn't specify the partition type during the partition creation.
Code:
busybox mke2fs -m0 -b4096 /dev/block/mmcblk0p2
Now mount the extended data partition.
Code:
mount -t ext2 /dev/block/mmcblk0p2 /system/sd
We'll still need to be able to access the original data partition now and later, so, prepare the mount point and mount it as well.
Code:
mkdir /system/internal
mount -t yaffs2 /dev/block/mtdblock4 /system/internal
At this stage, you'll need to copy over all files inside the original /data directory to your new sd directory. You'll also need to make sure that the permissions isn't changed during the process. To do this, just tar the entire original data directory to your new one.
Code:
cd /system/internal
busybox tar -cvf /system/sd/old-data.tar *
cd /system/sd
busybox tar -xvf old-data.tar
busybox rm old-data.tar
The initialization for the new data directory mounting in the boot process does not modifies the boot image's init.rc. Thus, it seems that the initialization process is called after the radio initialization. I can't get my GSM to work without this step. We'll need to symbolic-link back the /system/sd/radio directory to the original internal storage /data/radio directory. And remember that on the boot process, we'll need to mount /system/internal *before* /system/sd.
Code:
cd /system/sd
busybox rm -rf radio
ln -s /system/internal/radio /system/sd/radio
After fiddling for several hours, I realized that the date and time settings gets reset on each boot. Fixed by symlinking the /data/date.time back to the internal storage.
Code:
cd /system/sd
busybox rm -rf date.time
ln -s /system/internal/date.time /system/sd/date.time
5) Prepare the boot init script
---------
The Froyo boot process runs init.rc script, which is replaced by the boot.img when system boots. So we can't put our new /data directory mount commands there, unless we extract, unpack, modify, repack the boot.img. Ok so I decided that modifying boot.img will be the last step if I can't get it working without it. There must be an easier way!
Also, there aren't any rc.d, rc3.d, bla bla directory in which we can put our custom initialization script.
Luckily, there is a script that is called from the init.rc script during boot, which is stored on the root filesystem and can be customized. It's called /system/etc/install-recovery.sh. Thus, we'll put the initialization script there. If you already got a /system/etc/install-recovery.sh, you can just add our initialization script in the beginning of the. Alternatively, you can create a separate script to perform init, and call it from your modified /system/etc/install-recovery.sh.
There will be drawback, for example, it seems that the script is called after radio initialization, so we'll need to use the old /data/radio directory from the original /data directory, prepared on step (4).
So now you'll need to create (or copy) the install-recovery.sh script. You can use vi from the busybox, or easier is to just copy and paste the install-recovery.sh script provided in this post. In case you're a vi expert, fire up these commands. Don't forget to remount the root filesystem as rw first!
Code:
busybox vi /system/etc/install-recovery.sh
Write in the install-recovery.sh script:
Code:
#!/system/bin/sh
mount -t yaffs2 /dev/block/mtdblock4 /system/internal
mount -t ext2 /dev/block/mmcblk0p2 /system/sd
mount -o bind /system/sd /data
Don't forget to set executable and readable attribute at least for root user, or else the system can't run the script!
Code:
chmod 755 /system/etc/install-recovery.sh
So now you're ready to reboot the system. Double check the install-recovery.sh script, make sure all commands mounts the partition exactly to where you intend it.
6) Reboot your Ideos S7!
---------
Reboot and enjoy the trendemous increase on your internal tablet storage
WARNING!!! Do not attempt to perform factory data reset while running with /data mounted. It seems that S7 will format the /data partition as yaffs2, not sure as I haven't checked it. But it worth to try to change the install-recovery.sh script to mount the data partition as yaffs2, and then performing factory data reset.
Sorry I can't post either an image or attachment yet
Click to expand...
Click to collapse
can you make a video about how increase the internal memory? i trying but at final step after restart my ideos nothing happens, or screenshots, please i have 4 for weeks looking for a solution about the low memory on my ideos, i install joenilan rom but dont like me the launcher, please and sorry for my bad english.
This is one good tutorial that I missed
Sent from my Ideos S7 using XDA App
HELP
Hi, i followed the steps, and my ideos keep looping at the ideos start screen
is there anything i can do?
zonyman said:
Hi, i followed the steps, and my ideos keep looping at the ideos start screen
is there anything i can do?
Click to expand...
Click to collapse
Reflash with new program,search it ..
My way !
My device : Huawei S7-105
Another way to increse internal memory :
1 flash with stock rom 2.2.2 norvegian
2 flash trizetmod v3
3 with MiniTool Partition Wizard Home Edition i've made 3 partitions on internal memory ( s7-105 using mass storage options )
- 1.2 Gb fat32
- 6 Gb ext4
- 157 Mb swap linux partition
This was one of many attempts to increase memory , and at the end i was happy with that result ! I think that you can make your own partitions , as you wish ! I have seen many movies on youtube .
Most important thing to remember : first you create fat32 partition and make it primary , second is ext4 partition also primary and the last swap partition !
After you create the partitions , reboot in recovery and make a factory reset , and your S7 has 6Gb program memory !!!!!!
Another important thing : I am a newbie in " Android world " , so I do not know how correct is what I did but one thing is certain : I HAVE 5.28 Gb and I got rid of that annoying message LOW MEMORY !!!!!!
I hope I posted in the right place , so i ask an admin to check ! Thx
in summary of this post..
all you have to do is to backup ur current rom via cwm by goodane..
make a 2nd primary partition formatted ext2/ext4 (for ext2 supports 2GB or less.. ext4 for 2GB or higher)
flash trizet's v3 rom
-THE END :good:
Hello guys!
I have a Huawei Ideos S7 Slim too,
Specifications
- Model: Huawei Ideos S7 Slim
- Version: 202u
- Intermal memory: 160 mb
I'm trying to do the steps to increase the internal memory
I don't getting success with the process
I wonder if the process works with the model Huawei Ideos S7 Slim 202u
Thank you
So, the Note 8.0 is a nice, fast, expensive device that had a big shortcoming for me: as shipped, the SD card is not useful as a place where application data easily lands - it's only intended for storing music and video files, or those chunks of data you manually target to it.
I fixed it, after a fashion, by mounting the card at boot time as sdcard0, which Samsung normally assigns to the (very limited) internal storage. The internal /data/media pool is treated as the external sdcard and very little installation data defaults to it. Apps2SD is still broken, but quite a lot of things simply default to using /sdcard0 as their preferred storage, which I find helpful.
You have to mount it at start time (init.d), and you have to mount it correctly (bind)
I figured out and set my device up this way by setting init.d scripts I learned about from threads by Ryuinferno (init.d) and mattiadj (rebinding in the Note 2) for this. Translation: none of this is my work, I just sounded out how others had done it and am assembling it here, since I know it will help other Note 8 folks.
I think that the init.d script support is very interesting - there are a lot of ROM tweaks that rely on init.d. You do not need a custom kernel for init.d to work the note 8 - which is nice, since we have no custom kernel
The outcome of this mod is that with an sdcard inserted, I get:
/storage/sdcard0 29.7G 3.68G 26.0G 32768
and
/storage/extSdCard 9.87G 1.78G 8.09G 4096
If I remove the card at boot, I still have apps (installed at /data/data) and the media
pool reverts to normal:
/storage/sdcard0 9.78G 1.78G 7.99G 4096
I wrote none of the scripts I'm using and will be the first to admit that I may have set them up stupidly.
Doing this voids your warranty and gives you pimples and a moon tan. But it does mean your sd card expands your storage and I hope that if there are better ways to do any of this, folks will chime in.
tools needed:
- knowledge of ADB and working ADB
- helps if you know how Unix and windows terminate lines differently, and can get your copy of Notepad++ to help you with the script, if you're trying this from Windows
- a note 8 running the 4.1.2 software - this approach is only tested there
- Kies
- Possibly Odin as a replacement for Kies (untested)
- understanding of how to put your device into recovery mode and trigger the Samsung recovery
- the US stock firmware for your device, for use with Odin (unless waiting on 1+ gig downloads if you screw something up is ok by you - the Kies method works, slooooowly.)
- Framaroot, to root your Note 8 (see the thread by tweebee)
- Busybox installed
Steps:
Install Framaroot
Root your device
Install busybox
Easy part done.
Next, you need to be able to run init.d scripts. At first I thought this might require a custom kernel, until I ran into Ryuinferno's excellent tool for enabling init.d without a custom kernel.
the thread I learned this from is by Ryuinferno at http://forum.xda-developers.com/showthread.php?t=1933849
I used term-init.sh from an ADB command line, but the thread has an APK in it called Uni-Init.apk that I would expect to work.
What you're doing is creating an install-recovery.sh script and telling it to go read /etc/init.d and run scripts there at boot.
Next, you want to create a simple script and drop it into /etc/init.d You can do this with an adb push; if you create the file in windows, though, you need to deal with the line endings correctly. You need the script to be executable and to be owned by root.
The one I'm using is this, from Mattiadj of the Note 2 community
in this thread: http://forum.xda-developers.com/showthread.php?t=2036796:
I call the script 07mount on my device, and a copy is attached to this post.
-----------------------script starts next line
#!/system/bin/sh
#extsd2internalsd is a modification that allows to switch internal sd to external sd
#and viceversa. With this you can use default internal sd only for app storage
#and the external sd to store all apps resource and all others stuff. The resut is a very
#big increase of installable apps on gnote2 and note8
#All credits to Mattiadj of xda forum for the idea and script and to mike1986 for
#the cmw zip. xda thread url
# at http://forum.xda-developers.com/showthread.php?t=2036796:
sleep 10
mount -o remount,rw /
mount -t vfat -o umask=0000 /dev/block/vold/179:17 /storage/sdcard0
sleep 30
mount -o bind /data/media /storage/extSdCard
chmod 777 /mnt/extSdCard
sleep 10
chown 1023:1023 /storage/extSdCard
chown 1000:1000 /storage/sdcard0
------------- end script on blank line above
You need /system remounted read/write, either in your favorite file explorer or via adb shell:
#mount -o rw,remount /system
to put the file in and
#chown root:root
the script itself
Now, put a fat32 formatted card into your sdcard, and reboot. When done, you should be able to see that your data storage has been remapped.
If you ever wanted to install a Samsung update, by the way, you'd need to completely unroot the device. I think the following would probably work:
- remove the su binary
- remove superuser from /system
- remove the busybox binaries
- remove install-recovery.sh from /etc and the /etc/init.d folder
If there was someting in an update you really wanted, you might do better to start by using the Samsung firmware downloaded from samfirmware.com, set your device all the way back to a clean install, then check for the OTA - Samsung does look at modifications and blocks updates to devices with changes to /system. My device is ineligible for OTA at this time.
That said, it appears that using Kies in emergency recovery mode can be used to reset your device to an as-shipped condition (I learned this when an early experiment resulted in my device being weirdly screwed up - bootable, but the network was down for the browser, etc. DNS and ping worked from an ADB prompt, though...)
You can download a copy of the script at http://www.mediafire.com/?2wbm439vlapb6om
I'm gonna try this when I have a full afternoon off as I tend to mess things up the first time I do them. But this will be super useful if I get it working. Hopefully when people start developing custom roms they can build this script in and save us all the trouble :highfive:
Haven't tried it yet, but it sounds like a custom recovery is very, very close. Once that happens, making this into a flashable modification will be trivial.
The very active Note II development is incredibly helpful, because our hardware and software are so similar to theirs.
I know this was something that users on the other Galaxy Note 2 threads were doing, and was wondering if at some point this will be an issue with say JB 4.2.2. I recall that Apps2SD would be an issue later on and wouldn't work, but I never got to that point. For me I am really in need of a 32GB tablet and just can't compromise even with a 64GB microSD card. I don't know why this tablet isn't supporting a 128GB microSD card, that would be awesome.
Upgrading internal storage by blending in sdcard
Just to be clear - this mod does not allow app2sd style migration of apps (in /data/app) to the sdcard.
Rather, it puts /data/media on the sdcard. A lot of apps use /data/media as their default for storage, though, so it's a helpful middle ground. Also, your apps are installed whether or not the sdcard is inserted, which is helpful.
I notice that the update includes a script called
install-recovery.sh - the same script that this method is using.
I have tested replacing a backed up copy of install-recovery and also
appending the command
run-parts /system/etc/init.d/ to the new file.
Using just a script to call run-parts or the stock install-recovery.sh works just fine.
I found a much easier way of doing this.
http://forum.xda-developers.com/showthread.php?t=2276193
hi friends & master
please help me
Is there any way to transfer games and apps to the internal storage with app2sd (moving apps & games in from system Rom to SD card(internal) no memory card)?
my system rom There is almost full
1.44 GB (148 MB free)
internal 12.6 GB (5.8 GB free)
SD card 12.5 GB (5.6 GB free)
I do not need to memory card
LVM is a logical volume manager. It joins underlying physical partitions into a pool which can be divided to virtual partitions. Since there are no real partition layout changes, hard bricking is a lot more difficult (but not impossible).
You may have BlePart installed previously, it makes no difference. You can use stock partition layout.
WARNING: LVM requires you to install LVM compatible ROMs. Do not install non-LVM ROM if you have LVM installed.
All your data will be wiped.
Current space division
If you would like to change this, open the zip META-INF/com/google/android/update-binary, find the partition sizes, and modify data partition size (the total space is nearly 3GiB so watch the space).
System - 800MiB
Cache - 10MiB
Data - 2000MiB
Internal SD - rest of the free space
Requirements
LVM-compatible recovery installed
Strongly recommended: Unlocked pink screen
How to install
Download the zip from downloads below
Save it to your phone's EXTERNAL SD card
Reboot to recovery (if you notice errors it is normal, since LVM is not yet installed)
Install the zip from your external SD
Your phone will automatically reboot in 3 seconds
How to uninstall
Method 1
Download the zip from downloads below
Save it to your phone's EXTERNAL SD card
Reboot to LVM recovery
Install the zip TWICE (first time it will notify you LVM is installed, second time it uninstalls it)
Your phone will automatically reboot in 3 seconds
Method 2
Install any non-LVM recovery (TWRP recommended as some older CWM recoveries cannot format vfat properly)
Reboot to recovery
Wipe/Format system, data, cache, internal storage partitions (and repair file system if errors occur)
Reboot recovery
Method 3
Install stock ROM
Downloads
BlePart-LVM-11
Hello, Blefish
These lines i need to change? When i clean applications i have empty space in "System" 220mb, and "Data" i have 270mb empty space.
/sbin/lvm lvcreate -L 700M -n system lvpool;
/sbin/lvm lvcreate -L 10M -n cache lvpool;
/sbin/lvm lvcreate -L 2350M -n userdata lvpool;
/sbin/lvm lvcreate -l 100%FREE -n media lvpool;
Click to expand...
Click to collapse
P.S. Can i delete directly application from system.new.dat?
Good,thanks!
BlePart-LVM-11 uploaded.
This change is minor. It only simplifies installing/uninstalling and makes it easier for the end user. It also adds necessary checking mechanism to make sure the user is installing LVM from a proper location with proper tools.
My external sd card don´t work, can I still get it done?
MazdaGTI said:
My external sd card don´t work, can I still get it done?
Click to expand...
Click to collapse
Through ADB sideload you can do it . You need to install necessary drivers and ADB if you are on windows. Technically it is possible to use ADB and push the zip to /tmp/ for example, and install from there aswell.