Related
I installed the new 2.2.320 sbf from TBH, just to start fresh. I have now tried 6 different programs to root my phone. None of them are working...Is anyone else having this issue? And if you got it working, what steps did you take to fix it? Thanks in advance
Use z4root. Had The same problem. This is a one click root application.
Yup, same problem here too. I was actually going to ask if anyone has the z4 root app because it disappeared from the market. It was the only thing that worked the first time I flashed the new SBF.
ya, after flashing the new SBF, had to manually install Z4 as it wasnt in the market. Also it seems as if the D2 method wasnt working properly.
Thanks for the help everyone...
Sent from my DROIDX using XDA App
s0n- said:
ya, after flashing the new SBF, had to manually install Z4 as it wasnt in the market. Also it seems as if the D2 method wasnt working properly.
Click to expand...
Click to collapse
I don't know what the reasoning is, but no other root methods seem to work on 2.2.1.
z4root worked fine for me
deadpixell said:
z4root worked fine for me
Click to expand...
Click to collapse
YEs it works. That was the point of this thread. lol
I had to wipe data to get z4 to work. I don't know why but if I downloaded all my apps again and set everything up it wouldn't work.
Put your phone in airplane mode, reboot, run z4root, let it reboot you phone. Once it powers on take it out of airplane mode and you should be rooted.
Sent from my DROIDX using Tapatalk
I tried loading z4root on my phone, but every single time I try to download it it say "content not supported on phone".
Any help is much appreciated.
SleekDX said:
I tried loading z4root on my phone, but every single time I try to download it it say "content not supported on phone".
Any help is much appreciated.
Click to expand...
Click to collapse
I used z4root also make sure debugging is turned on
Sent from my DROIDX using XDA App
Breakthecycle2 said:
I don't know what the reasoning is, but no other root methods seem to work on 2.2.1.
Click to expand...
Click to collapse
Rooting through ADB works... z4root is much easier of course.
The .340 OTA installed on my phone today. Lost root.
I tried the DarkOnion batch file (DoRootWin_2.1.4) several times and could not get it to run to completion.
As mentioned, Z4 (in airplane mode) worked fine.
I tried this...my phone is telling me it cannot down the file because the file type is not suported by my phone. What am I missing? Thank you!!!
I too am having issues with rooting after the ota update. I initally was rooted using the rootmyx2 one click gui from sli3ntki11 and did the update, now nothing will give me root access, I tried z4, rootmyx2 (again), and tried the doroot.bat method through the android sdk install. Kinda at a loss. Any help on this would be greatly appreciated.
Sent from my DROIDX using XDA App
So I believe I figured it out. I have two existing superuser.apk in my system/app folder. This from what I read in some other posts is confusing z4 ( go figure smart enough to root but not to overwrite, lol) but the directory is read only. The other post gave a link to the steps to access it but the page was not found. Can anyone give me the steps to take to gain access to the directly and make it read/write so I can remove those two rogue files and get rooted?
Sent from my DROIDX using XDA App
z4root not supported on my droid X
hi,
i updated my Droid X to the latest version. 2.3.340. and downloaded the z4root through my phone from the link here and i get an error message that the file is not supported on this phone. please help i am new to this and still don't fully understand all of the terms. i tried to download the z4root 1.2 from 4shared.com but the phone hangs and nothing happens. any type of help will be appreciated, thanks.
did you sucessfully install it or did you get the error while trying to install it. you will have to download the apps installer from the market and use it to install the z4root.apk from your sd card.
crxin said:
did you sucessfully install it or did you get the error while trying to install it. you will have to download the apps installer from the market and use it to install the z4root.apk from your sd card.
Click to expand...
Click to collapse
what is the name of the apps installer i need to use the Z4root.
Latest update is out in the wild: 3.8.7.XT610. Info here
apparently this is a 43.8MB file
updated Blur
not Gingerbread
Wonder if it supports root??
jhalsey205 said:
Latest update is out in the wild: 3.8.7.XT610. Info here
Wonder if it supports root??
Click to expand...
Click to collapse
I saw a post by Android wizard extraordinaire, CellZealot, over at MyDroidForums, who claims :
"... it supports root and is an excellent build. It also supports using the band unlock and GSM performance is far superior to the previous radio firmware. Overall this build is incredibly stable and without question the best build yet for this phone."
That's good enough for me.
Has anyone received this OTA yet? Nothing yet for my two in NY (one rooted, one not).
Sent from my DROID PRO using Tapatalk
Does this update require that I unroot my phone prior to it?
Could any person who has received the update upload it somewhere, please? I cannot wait to update my phone and root it again. I have tried to update it but it keeps telling me I have the latest software version.
Scanned the net and no one has posted the update...hopefully someone here will soon
nottin in new jersey checked on moto droid pro system update whats up with this enyone got this update runnin thankssss
There was a renewal. Loading ...
:-(
Was rooted. Installed OTA update without problems. Then applications like Titanium Backup can not longer get root privileges. Ran Z4Root to Permanent Root again, it crashes and leaves phone unstable, most of the time freezing a few seconds later and I have to remove battery :-(
fpont1 said:
Was rooted. Installed OTA update without problems. Then applications like Titanium Backup can not longer get root privileges. Ran Z4Root to Permanent Root again, it crashes and leaves phone unstable, most of the time freezing a few seconds later and I have to remove battery :-(
Click to expand...
Click to collapse
Blarg, don't like the sound of that. I'm nit sure that my wife uses any root apps but there is just something wrong with an android phone that does not have root.
I used SuperOneClick 1.7 to get root again after apply this update.
Sent from my DROID PRO using XDA App
raphael888 said:
I used SuperOneClick 1.7 to get root again after apply this update.
Sent from my DROID PRO using XDA App
Click to expand...
Click to collapse
Thanks, will try it myself then...
raphael888 said:
I used SuperOneClick 1.7 to get root again after apply this update.
Click to expand...
Click to collapse
Thanks very much for the tip... worked a treat!
Guys pleaaaaaaaaaaase, can someone upload the update file off his SD card?
received the update and rerooted again
Received the update and was able to root using the aroot method, z4root will not work .
Download aRoot!
rafeee2 said:
Guys pleaaaaaaaaaaase, can someone upload the update file off his SD card?
Click to expand...
Click to collapse
I second that!! Bloody takes them ages this time ... wonder why the holdup with some devices?? Its not like theres a million of Droid Pros out there ...
OK, so I can also root with SuperOneClick 1.7 after the update, but the apps like Titanium still can't get root from the SuperUser app. adb shell su also gets Permission denied (after reboot). Any hints?
Edit: problems solved by using aRoot. My conclusion: run aRoot post-update, not z4root nor SuperOneClick.
I lost root after the update and tried Z4Root with no results. SuperOneClick worked after I tried both root methods and rebooted the phone.
I am using AntTek App Manager to remove bloat without any issue. The phone seems more responsive and I have not had any random reboot until now.
Yep - aroot after the update worked. Re-froze the junk via Titanium and my Pro is running well.
For those like me who didn't know how to use aRoot:
Quoted from designgears
http://forum.xda-developers.com/showthread.php?t=981866
http://ponack.net/designgears/atrix/aRoot/
"How to use:
note: xp users, you will get an error about the TIMEOUT function, ignore it.
Enable USB Debugging on your phone (settings > applications > development > enable USB debugging)
Plug your phone into your computer
Extract aRoot.7z
Run aRoot.bat (run unRoot.bat to unroot)"
I have an AT&T Atrix on the 1.5.7 firmware. I do have all drivers installed, USB debugging enabled, and am using Windows 7 (dual booted on a macbook 2011).
I believe my problem is that I originally rooted it on the old firmware and then i installed the 1.5.7 OTA update. I now have the Superuser app on my phone but it does not give anything root permission. I've attempted to root again via Superoneclick but it gets hung right after pushing pneuter or gingerbreak to the phone. I have also tried unrooting but that gets hung up as well.
Can anyone give me some things to try or even walk me through something?
Thanks so much!
search the dev forum for gladroot as to why it doesn't work...
and you can try to re-root using gingerbreak, which is also in the dev forum.
basically updating without following the proper steps will not keep your root. and also.
NEVER USE SUPERONECLICK!
spend some time in the dev forums. you'll learn a lot.
Thanks! I'll look into the gladroot issue.
I have tried Gingerbreak but when I run the program with my phone connected, the spinning loading cursor displays for a second then nothing happens. I've ran as administrator but that doesn't do anything different.
It's worth noting, on 1.8.4 Gingerbreak 1.2 worked fine. I know recovery wasn't playing nice unless plugged in. That could also help. Obviously it won't hurt.
notanatheist said:
It's worth noting, on 1.8.4 Gingerbreak 1.2 worked fine. I know recovery wasn't playing nice unless plugged in. That could also help. Obviously it won't hurt.
Click to expand...
Click to collapse
There is no 1.8.4
Meh, 1.8.3 I means. Although I just noticed Greyblur takes it down to 1.5.7
CaelanT said:
There is no 1.8.4
Click to expand...
Click to collapse
Update to 1.83 and use gingerbreak. You'll need an external SD card though. It works great.
Not sure if this is the place to put this, but I'm having a similar problem, even if I got here differently.
I tried superoneclick, and I tried gladroot. In each case, the program seemed to run successfully, did everything I expected from the directions, no error messages. Claimed success at the end of the run. The superuser app is installed, but no apps are listed. When I try to run an app that needs root, like Root Explorer, it just complains that my phone isn't rooted.
I used the directions and downloads here: http://forum.xda-developers.com/showthread.php?t=1016060
Build number was OLYLA_U4_0.37.4
My phone is on Bell, so I used the Bell directions. Anyone else have or overcome this problem?
i am rooted, all root apps work.
my problem is android commander says am not rooted (windows xp)
and adb dont work
any solution?
Use gingerbreak and report back
Sent from my GT-I9100 using XDA Premium App
So I tried doing the webtop hack anyway, and when I got to this step:
Code:
adb shell
su
my phone prompted me to allow root access. Finished the process and it's working fine. Ran Root Explorer, it asked for permission, and now it works fine, too.
Maybe doing something as explicit as 'su' in adp shell was the kick in the pants it needed. Either way it's working now...
I thought maybe I'd added superuser to auto-end list, for whatever reason, but when I checked it wasn't there...
tjjensen23 said:
Use gingerbreak and report back
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
my sig says i used gingerbreak m8
So I picked up an ATT Atrix 4g the other day and I love it! Last cell's were a BlackBerry and before that an iPhone. Android OS blows those away. So I am the tinkering type and want to root and use custom ROM (greyblur). Currently I am upto date (version 4.1.83). From what I read here, I need to flash back to 1.26 via this guide (http://forum.xda-developers.com/showthread.php?t=991072). Installed RSDlite, passworded file, removed sim card, memory card, booted with RSD support, opened RSDlite, selected file (extracted to c:\GladRoot...also tried directly into c, Start. Created the image, it rebooted my atrix, and then the Status threw this message:
"Failed flashing process. failed flashing process. Phone did not re-enumerate after RAM-downloader was sent. (0x703E); phone disconnected.
Progress: Exectuded 100%
Result: FAIL
So was am I missing here? I am on version 4.1.83, but there is reference to 1.2.6 and 1.5.2...I assume these numbers are the firmware revision/version? So as I take it I need to "downgrade" from 4.1.83 to 1.26....? I am kinda lost here. Any help in the right direction would be great.
Look here to root your Atrix http://forum.xda-developers.com/showthread.php?t=1016060
1) Where can I verify that I am on 1.2.6 on my Atrix?
2) I ran the gladroot.bat as admin (win7 user) and got:
waiting for root access to kick in...
psneuter failed to execute properly
I extracted gladroot to c:\gladroot
Any thoughts?
Did you try to use Gingerbreak?
This is really easy, i got no problem with that...
Also, I think you need to install motorola usb windows driver to use rsdlite...
No I didnt try gingerbreak.
I do have the Moto USB drivers installed.
Settings>about phone>build number
Will show if you are on 4.1.26
When it comes to the psneuter fail, I had an issue with that too I believe. Try battery pull/restart. Make sure phone is fully charged. Make sure to right click and run it as admin. Other then that, I don't know what else to suggest.
Edit: if you have any system apps frozen with titanium backup, try unfreezing them and also make sure you have the home motoblur launcher unfrozen if you are flashing an sbf.
Sent from my MB860 using XDA App
lhurtado said:
Did you try to use Gingerbreak?
This is really easy, i got no problem with that...
Also, I think you need to install motorola usb windows driver to use rsdlite...
Click to expand...
Click to collapse
Please tell me a way to unroot after rooting with ginger break?
Sent from my MB860 using XDA App
Jazor28 said:
Please tell me a way to unroot after rooting with ginger break?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Flash sbf.
Sent from WinBorg 4G via XDA premium app
why do not root with gingerbreak?
briefmobile[dot]com/motorola-atrix-4g-root - this is even a link i found on xda-dev
i want my device rooted too, but noneed to flash back, flash up, flash back blabla?
gingerbreak sounds much more easier for me - why you guys recommend gladroot? whats the diffrence? is gingerbreak that bad?
Backing out gingerbreak - "flash sbf"?
CaelanT said:
Flash sbf.
Sent from WinBorg 4G via XDA premium app
Click to expand...
Click to collapse
So what does this really mean? I used gingerbreak after superoneclick hung on psneuter. Phone rebooted after gingerbreak, but superuser app was nowhwere to be seen. I got cold feet and did a factory reset thinking this was all I needed to undo what gingerbreak (and superioneclick?) did. EasyTether now hangs when disabling to I think something is broken.
using gingerbreak to root is real simple I can't post a URL, but briefmobile has instructions on how to do so using gingerbreak. briefmobile.com/motorola-atrix-4g-root
Gingerbreak and Gladroot are equally good. Some don't like Gingerbreak as it can wipe internal sdcard.
Beamed in from WinBorg 4G via XDA Premium app
Hi, just installed the new BELL OTA update that is now available. If you have not received it, go to Settings -> About Phone -> System Update.
To Root, download GingerBreak from this thread:
http://forum.xda-developers.com/showthread.php?t=1044765
You will need v1.20 - install, enable USB Debugging, and wait. It took around 1 minute on my phone. Afterwards, if you were not rooted previously, download SuperUser from the market.
Can confirm this method works. First try did not work; rebooted unmounted formatted SD card, remouted. Then retried gingerbreak. 1 min approx to root, root confirmed with superuser.
Downloading now...
What about gladroot? It doesn't work?
Glad root will work, frozenfish is left intact in /osh/sbin.
(That's just the su binary with a different name, but the right permissions, you can adb shell, and type /osh/sbin/frozenfish and have a root shell.)
Cheers!
Worked for me. Takes a few good minutes so be patient.
Yeah, works fine to root and unroot, just have to be patient and wait.
NFHimself said:
Glad root will work, frozenfish is left intact in /osh/sbin.
(That's just the su binary with a different name, but the right permissions, you can adb shell, and type /osh/sbin/frozenfish and have a root shell.)
Cheers!
Click to expand...
Click to collapse
I just updated (37.23) yesterday, there is no /osh/sbin/frozenfish on my Atrix
Now running Blur_Version.0.37.23.MB860.BellMobility.en.CA (build OLYLA_U4_0.37.23)
I had used GladRoot 4.3 to previously root the device. Now I'm wondering if it's going to be safe to run Gingerbreak 1.2 - anyone in the same scenario ?
daymz said:
I just updated (37.23) yesterday, there is no /osh/sbin/frozenfish on my Atrix
Now running Blur_Version.0.37.23.MB860.BellMobility.en.CA (build OLYLA_U4_0.37.23)
I had used GladRoot 4.3 to previously root the device. Now I'm wondering if it's going to be safe to run Gingerbreak 1.2 - anyone in the same scenario ?
Click to expand...
Click to collapse
Just thought I'd report that I successfully ran Gingerbreak 1.20 on 37.23 (after having used GladRoot on 37.4) and everything seems OK, I'm back in root mode.
nikechristo said:
What about gladroot? It doesn't work?
Click to expand...
Click to collapse
I used Gladroot for the initial FW version, but I didn't want to chance that it may not work or cause any issues like SuperOneClick. I went with Gingerbreak just to be safe.
Put me on the list of the list confirming that Gingerbreak works with this FW...
Hi I tried to use Gingerbreak but the application was running for about 20 minutes and then it crashed. I was wondering if this root app worked for everybody and if maybe I'm doing something wrong.
I'm have a Bell Atrix with the latest firmware.
Any information or suggestion/solution would be appreciated!!!
heptic buttons
Anyone having issues with their backlighting? Mine seems dim and sometimes don't come on.
Thanks
Just ran on 37.23. Works! Only took a minute.
Can confirm this works on bell 2.2.2. This indeed deleted my internal sd data though, so make sure to back up before proceeding.
Sent from my MZ604 using XDA Premium App
I just have a quick question about using Gingerbreak on my Atrix running this newest firmware.
Do I absolutely need an SD card in the phone?
I don't have one so I was wondering if I can stil do it or I need to go out and get one tomorrow?
Thanks!
You need one definately.
Successful 37.23 update - unsuccessful root.
I've just ran the the bell 37.23 update.
I managed to gain root access again after running super one click.
However after I factory reset the phone all my root applications stopped working.
Super user was still in the app drawer, but titanium backup was saying it didn't have root access. (along with every other root app)
I tried rooting/unrooting the phone again with super one click and every time it hangs on "Running psneuter..."
I also tried rooting with GingerBreak and it just stays on the "Running exploit..." screen.
Any suggestions?