Just wanted to post a notice of success story of getting SEUS and Flashtool working under Ubuntu 11.04 with Virtualbox installed from the repository running Windows XP. This means that it IS possible to use both of these tools just fine under Linux (with Windows running as a guest). Looking around the web a few weeks ago led me to believe that it couldn't be done, as some people (Mac users IIRC) were having issues getting Virtualbox to properly handle the X10 when it is in flash mode. Here are the steps that worked for me:
1. Install Virtualbox from Ubuntu Software Center
2. Create a Windows XP virtual machine and install Windows
3. Add your username to the group "vboxusers" in Ubuntu (this will allow the VM to use USB devices) and reboot to apply the change.
4. Create a blank filter under USB in the settings of the main Virtualbox menu so that all USB devices can be picked up automatically.
5. Run SEUS and check for updates, first time doesn't work because it installs the drivers for flash mode, second time worked fine for me.
6. Use Flashtool, etc. as you like - fully functional.
It was just nice to realize I didn't have to look around for a Windows machine to borrow for the amount of time it takes to test out different basebands and custom ROMs/kernels, so I thought I would share here.
Post a link to this thread in the Flashtool thread...
Should be helpful for others...
sent from x10 CM7 (FreeXperia Project)
Amazing how i was told Vbox cannot do this.
Well done.
This is awesome. My SATA connector on the mainboard just broke and the disks attatched to it was my Windows 7 installation. Now that that is gone (until I get it fixed) I'll have to use this method because I had my Linux running on the reserve/backup PATA disk (just in case **** happens, and it came in handy now).
And I really don't want to re-partition those disks, reinstalling Windows, reinstalling Mint (Fixing possible GRUB or MBR issues etc.) So this is gonna come in very very handy.
As I'm writing this I'm installing XP in VirtualBox.
I had to reboot linux after adding the username to the vboxusers group before it could pick up my USB ports.
But else it's working flawlessly...
Original post updated with reboot instructions, thanks! Glad to hear it's working for you too.
Flashtool works in VirtualBox for Mac Users
Hi Everyone,
I confirm that it works in Virtualbox for Mac. The point was: create a blank filter for USB. I did it under the windows machine.
Thank You coverup!
coverup said:
4. Create a blank filter under USB in the settings of the main Virtualbox menu so that all USB devices can be picked up automatically.
Click to expand...
Click to collapse
This is the key point
I have been using it for past 2-3 months didn't knew that general opinion was that it doesn't works.
well i don't have a filter coz i use my usb devices on linux most of the time so i manually add device.
confirmed working on both virtualbox and VMWare too.........
anantshri said:
This is the key point
I have been using it for past 2-3 months didn't knew that general opinion was that it doesn't works.
well i don't have a filter coz i use my usb devices on linux most of the time so i manually add device.
confirmed working on both virtualbox and VMWare too.........
Click to expand...
Click to collapse
Manually adding doesn't work on mac, but it works on linux.
arkedk said:
I had to reboot linux after adding the username to the vboxusers group before it could pick up my USB ports.
But else it's working flawlessly...
Click to expand...
Click to collapse
I suppose reboot is not exactly necessary for linux. You just need to logout and login again to update the granted groups.
I didn't create a blank USB filter, because I don't want to catch every USB device.
Instead I created a filter for all devices with just the VendorId '0fce' to catch all states of my X10.
Amazing great work ,,Well done.
m.maga said:
Hi Everyone,
I confirm that it works in Virtualbox for Mac. The point was: create a blank filter for USB. I did it under the windows machine.
Thank You coverup!
Click to expand...
Click to collapse
anantshri said:
This is the key point
I have been using it for past 2-3 months didn't knew that general opinion was that it doesn't works.
well i don't have a filter coz i use my usb devices on linux most of the time so i manually add device.
confirmed working on both virtualbox and VMWare too.........
Click to expand...
Click to collapse
Hmm... Not working for me with virtualbox, a mac host and a Win XP guest.
First tried manually adding. Next, I put a blank USB rule at the top of the USB filters. This time, it successfully captured and the hardware install wizard popped up. FlashTool did not recognize the phone.
Soooo.... are drivers from SEUS needed (unclear on that)? Sony pulled SEUS for x10, by the way. If needed, has someone mirrored it somewhere? USB drivers are installed - FT and adb work fine when phone normally booted.
I'm using parallel 7 on osx lion
windows 7 runs very smoothly and it can read my phone's sd card
but x10 is not recognized in flash tool
i thought virtual box and parallel are similar
so how to create a blank filter under USB in the settings ?
m.maga said:
Hi Everyone,
I confirm that it works in Virtualbox for Mac. The point was: create a blank filter for USB. I did it under the windows machine.
Thank You coverup!
Click to expand...
Click to collapse
anakinlam95 said:
I'm using parallel 7 on osx lion
windows 7 runs very smoothly and it can read my phone's sd card
but x10 is not recognized in flash tool
i thought virtual box and parallel are similar
so how to create a blank filter under USB in the settings ?
Click to expand...
Click to collapse
I figured out my problem. It was just as I expected. A different set of drivers is needed to use flashtool to flash when the phone is in flash mode. It seems that many people take this for granted, since they've had an xperia for a while, it isn't explicitly mentioned in the flashtool posts.
The flashtool folder will something called gordons gate (IIRC). If you didn't install that and try again.
Does it really work? I just found out there is a problem for ADB working under windows 7 as a guest. It is also documented as a bug
https://www.virtualbox.org/ticket/6620
Given problem with that, I am very leery to even want to flash anything with that even though it is using a different driver.
Very good! After a lot of research. I was already trying fastboot, unsuccessfully, when I found this. Worked perfectly on Ubuntu 11.10 32b & VirtualBox.
One point I'd like to mention is that even creating the blank filter, besides flashing worked on first try, adb was not finding the device. I had to manually attach it, and more than once while rooting it. Pretty easy, but was unexpected and I wasn't waiting for something like that. May help others.
I still have to try filtering by verdor ID as suggested by User Name in post #10.
Thanks!
rapchan said:
Very good! After a lot of research. I was already trying fastboot, unsuccessfully, when I found this. Worked perfectly on Ubuntu 11.10 32b & VirtualBox.
One point I'd like to mention is that even creating the blank filter, besides flashing worked on first try, adb was not finding the device. I had to manually attach it, and more than once while rooting it. Pretty easy, but was unexpected and I wasn't waiting for something like that. May help others.
I still have to try filtering by verdor ID as suggested by User Name in post #10.
Thanks!
Click to expand...
Click to collapse
Dear all guys,
Does anybody know if is possible to use MTK Flashtool under a windows xp virtual machine (host-linux from virtualbox) in order to flash ROMS ¿?
I have already do this step "4. Create a blank filter under USB in the settings of the main Virtualbox menu so that all USB devices can be picked up automatically". But when i try to flash any ROM nothing happens. The preloader is not detected.. i get an error message similat this: "The usb-device is already in use on Host-linux.."
I would like to use MTK Flashtool on linux under a xp virtual machine
Regards.
m3n3chm0 said:
Dear all guys,
Does anybody know if is possible to use MTK Flashtool under a windows xp virtual machine (host-linux from virtualbox) in order to flash ROMS ¿?
I have already do this step "4. Create a blank filter under USB in the settings of the main Virtualbox menu so that all USB devices can be picked up automatically". But when i try to flash any ROM nothing happens. The preloader is not detected.. i get an error message similat this: "The usb-device is already in use on Host-linux.."
I would like to use MTK Flashtool on linux under a xp virtual machine
Regards.
Click to expand...
Click to collapse
I though Flashtool has supported Linux, why u need virtual machine???
Check this out :
http://forum.xda-developers.com/showthread.php?t=920746
XtremX10 said:
I though Flashtool has supported Linux, why u need virtual machine???
Check this out :
http://forum.xda-developers.com/showthread.php?t=920746
Click to expand...
Click to collapse
I did not know about linux version of Flashtool. I will check it thanks a lot !!
My phone is a Zopo ZP900 and the win version of Flashtool is 4.0 on Windows. I don't know if the linux version is compatible for my device (MTK 6577).
Related
Hello folks.
I'm working on custom kernel & ramdisk on Linux and was tired to plug/deplug the phone from my Linux workstation to a Windows netbook to flash it...
..Before I realized that Odin works perfectly well on a XP VM on a Ubuntu 10.4 host / Linux 2.6.35.2 !
Big bonus of this setup is that the software virtual USB switch allow you to plug/deplug the phone without touching any hardware.
Odin re-discover the phone and you can flash next millisecond
PS : this has maybe already has been reported, but I know few people who thought it did not work.
I never had any issues flashing my old Hermes through a VM XP machine on my hackingtosh back in the day, as long as I selected the correct USB port to stop OSX trying to grab hold of it.
Not quite "off topic" but thought it would put a few minds at rest
FlanFlinger said:
I never had any issues flashing my old Hermes through a VM XP machine on my hackingtosh back in the day, as long as I selected the correct USB port to stop OSX trying to grab hold of it.
Not quite "off topic" but thought it would put a few minds at rest
Click to expand...
Click to collapse
VMWare 3 on a Mac, no go for Odin. Can't get the USB to hold onto the phone, only device I ever had trouble with.
Gonna try VB...
distortedloop said:
VMWare 3 on a Mac, no go for Odin. Can't get the USB to hold onto the phone, only device I ever had trouble with.
Gonna try VB...
Click to expand...
Click to collapse
I thought that Vmware was better than VirtualBox for USB tweaks, maybe this is history !
Tell us aware of your tests on Mac
In download mode, SGS appears as Gadget Serial [021B] in VirutalBox.
Pretty good news, I should really clean the dust off my XP virtual machine!
Is Samsung Kies working too?
VMWare 7 in Ubuntu is fine too...
thunderteaser said:
Pretty good news, I should really clean the dust off my XP virtual machine!
Is Samsung Kies working too?
Click to expand...
Click to collapse
Kies in VirtualBox fine...VMWare fail MTP driver...
I finally just installed Windows 7 in Boot Camp. VM would never see the phone
braintheboss said:
Kies in VirtualBox fine...VMWare fail MTP driver...
Click to expand...
Click to collapse
Thanks for your feedback! I replaced VMWare with VirtualBox many years ago and this kind of issues was the main reason, you should stick to VirtualBox!
Can someone tell me how to prevent my mac to grab my phone on usb? I always get an error from my virtualbox, thay device is used by someone else.
Sent from my GT-I9000 using XDA App
Can't get the Galaxy S i9000 to connect to VirtualBox either.
I select Gadget Serial, it waits a minute or so, then pops up this error message:
Failed to attach the USB device Unknown device to the virtual machine XP.
Could not find a USB device with uuid (xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
Callee RC: NS_ERROR_INVALID_ARG (0x80070057)
Click to expand...
Click to collapse
After that, sometimes the phone still appears as available to connect, others it doesn't. Very similar to the VMWare problem.
This is on my Late 2009 MacBook Pro with Snow Leopard. Doesn't matter which USB port I select. I might try a powered hub in between the phone and the laptop. Connecting the SGS to the laptop USB is always a bit of hit and miss for both adb sessions and even mounting the sdcards. I frequently have to unlplug and replug the phone to get a connection. I've seen a few others report the same.
Must be an issue with OS X itself, but to make sure I'll have to try this on my Mac Pro desktop.
I'll report back any success, but I'm not hopeful, I've yet to read a report of someone successfully using Odin in a vm on a Mac.
I'll pile on with my test results. Thus far, under Mac OS X 10.6.4, I have not successfully connected the Vibrant to a VM USB in any Windows virtual machine with the Samsung USB drivers installed. I tried vmware fusion 3.1.1 and the latest virtualbox, 3.2.8. Both failed to recognize the phone when attempting to mount it. No issues in the Mac host environment or Bootcamp. The problem is limited to the VM environments under the Mac host environment.
If anyone has successfully connected the Vibrant to a Windows virtual machine running under vmware fusion or virtual box for Mac please report your results. I did quite a bit of searching and found no successful results with this combo. Thanks.
UK
Appears to be a lost cause for Mac owners who won't boot camp.
ukchucktown said:
I'll pile on with my test results. Thus far, under Mac OS X 10.6.4, I have not successfully connected the Vibrant to a VM USB in any Windows virtual machine with the Samsung USB drivers installed. I tried vmware fusion 3.1.1 and the latest virtualbox, 3.2.8. Both failed to recognize the phone when attempting to mount it. No issues in the Mac host environment or Bootcamp. The problem is limited to the VM environments under the Mac host environment.
If anyone has successfully connected the Vibrant to a Windows virtual machine running under vmware fusion or virtual box for Mac please report your results. I did quite a bit of searching and found no successful results with this combo. Thanks.
UK
Click to expand...
Click to collapse
Thanks to fresh discovering, you will be able to flash from the phone itself soon
supercurio said:
Thanks to fresh discovering, you will be able to flash from the phone itself soon
Click to expand...
Click to collapse
This is exciting.
this thread is definitely NOT what I had hoped to find after trying to use odin under VMWare/Win7 (MBP 2009)
I'll report back if I figure out anything. I've had similar battles with activesync/WMC under VMWare as well, and I've got things playing nice after some tinkering
Was a little worried about using virtual machines to flash my favorite toy, but this thread was the push I needed to give it a shot. Plus, seems like there's a fix to get out of almost any brick you manage to install on your phone, even if you have to build a JIG its not expensive.
So gave it a shot and it worked like a charm, Mint/Ubuntu 10.10 host using Virtualbox. One less reason to ever use Windows 7. Even when I don't boot it Windows breaks, I swear its a scheme to keep people who fix Microsoft products employed......
Supercurio that mean "Odin in Recovery" ? or im think in a false way? to flash tar files in recovery..
Sent from my GT-I9000 using XDA Premium App
Wow, you might become an archaelogist if you managed to bring back this thread from the ashes! We now have Heimdall, which is GNU/Linux native. Give that a shot.
I ever used Odin in a VM of Windows 7 over Ubuntu 11.04.
Heimdall is only for 64bit system and i user a 32bit version.. so...
But..Every flashed i did went good
An odd one....
I have one of the HD2 Android releases on my phone, and it's working fine EXCEPT....
USB tethering does not work.
Now here's the odd part.
1. I have two machines. Both running Win7/x64.
2. One loads the RNDIS driver and works fine. The other can't find the driver on Windows Update.
I have no clue what's going on, but the USB signature is VID_0bb4&PID_0FFe, which is valid for the HTC Sapphire.
And, like I said, the other machine -also running Win7 - finds it just fine.
Any ideas?
Answering my own question...
If you run into this, put this somewhere on your disk and point "Update Driver" at it.
It'll work.
Now why this was on the disk of ONE machine (which worked) and NOT the other (which did not), and why Windows Update wouldn't find it either (!!!) is unknown.
All I know is that this is the file that Windows 7 wanted, and didn't have on one of the computers - but did have on the other.
i'm running Windows 7 x64 and when i start usb tethering from android on HD2 there is Android Device driver missing in Device Manager, I've read that Windows 7 already have Remote NDIS support so no need for seperate driver download if you have Windows Mobile Device Center but it ain't working, the same problem as you had.
Luckely, your solution and this separate driver works, Windows 7 complains about unsigned driver but who cares, USB tethering is working
Thanks!
didn't work...
i attempted installing the driver OEM106.inf, but received an error once it was loaded on my pc:
"This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"
i was having similar problems as Genesis trying to tether my Android phone via USB to my pc and receiving a Remote NDIS driver problem (same as above). I successfully tethered my phone to my PC once (and only once), but after I woke the computer from sleep mode, my pc began giving me errors on the "Remote NDIS based Internet Sharing Device" stating that windows cannot load the drivers ("rndismpx.sys" & "usb8023x.sys"). I haven't been able to tether via USB since then.
Windows Update states the driver is up to date, and when I tried Genesis3's driver fix, it only gave me the same error.
Any ideas?
Running win7/x64 on a toshiba i3, and a HTC nexus 1 running android 2.2.2
The files referenced have somehow been damaged or destroyed. Find them from another machine and put them back, and the OEM file I posted will work.
Those two files have to be on your machine - the OEM file is the pointer to them, but the base-level drivers have to exist.
you may need the latest version of htc sync
i did all my flashing on an xp computer and when i got win7 i just could not get any drivers to work. i downloaded the latest version of htc sync and all the drivers loaded just fine. time to flash this thing again ive had the same rom for two weeks
This is what I was looking for, and it worked for me, thanks!
PISSA! Tried for a while to get usb tethering to work and this did it! Took a minute for windows to sort things out after the driver update but its working! THANK YOU!
DL DesireZ V3.4 final HD2 TMOUS
Hey guys..
This thread popped up first on google and im quite a noob so pls tell me how you include this driver in windows(win7 x64)
Genesis3 said:
Answering my own question...
If you run into this, put this somewhere on your disk and point "Update Driver" at it.
It'll work.
Now why this was on the disk of ONE machine (which worked) and NOT the other (which did not), and why Windows Update wouldn't find it either (!!!) is unknown.
All I know is that this is the file that Windows 7 wanted, and didn't have on one of the computers - but did have on the other.
Click to expand...
Click to collapse
Worked like a charm, thanks! I just had to update driver with provided file and it started working. Thank you very much again! Bump may not be a bad idea, maybe few more users will solve their problems with this. HD2 isn't a native Android device, so it wasn't that strange that it didn't worked out-of-the-box even with Win7 RDNIS (or sth like that) native support.
raven_raven said:
Worked like a charm, thanks! I just had to update driver with provided file and it started working. Thank you very much again! Bump may not be a bad idea, maybe few more users will solve their problems with this. HD2 isn't a native Android device, so it wasn't that strange that it didn't worked out-of-the-box even with Win7 RDNIS (or sth like that) native support.
Click to expand...
Click to collapse
After I have Device Manager opened, what do I do next?
Genesis3 said:
Answering my own question...
If you run into this, put this somewhere on your disk and point "Update Driver" at it.
It'll work.
Now why this was on the disk of ONE machine (which worked) and NOT the other (which did not), and why Windows Update wouldn't find it either (!!!) is unknown.
All I know is that this is the file that Windows 7 wanted, and didn't have on one of the computers - but did have on the other.
Click to expand...
Click to collapse
thaaaaaaaaanks.
I have been trying many drivers and tools. This one worked like a charm
I lOVE YOU!
Thanks so much man. you saved me from reverting back to windows mobile, i had about given up on usb teathering with android but you saved me. Im very greatfull.
Not a problem!
still not working
Genesis3 said:
Answering my own question...
If you run into this, put this somewhere on your disk and point "Update Driver" at it.
It'll work.
Now why this was on the disk of ONE machine (which worked) and NOT the other (which did not), and why Windows Update wouldn't find it either (!!!) is unknown.
All I know is that this is the file that Windows 7 wanted, and didn't have on one of the computers - but did have on the other.
Click to expand...
Click to collapse
I tried this and others ( htc sync, intel android drvrs,) but no success. Any clue what's missing?
i have windows xp, sp3....android 2.3.7 htc wildfire.
oem.inf
Genesis3 said:
Answering my own question...
If you run into this, put this somewhere on your disk and point "Update Driver" at it.
It'll work.
Now why this was on the disk of ONE machine (which worked) and NOT the other (which did not), and why Windows Update wouldn't find it either (!!!) is unknown.
All I know is that this is the file that Windows 7 wanted, and didn't have on one of the computers - but did have on the other.
Click to expand...
Click to collapse
I would like to share my solution. I modified the oem.inf file in the oem.zip(above) ,by changing the manufacturer name and device id as given in the PC 's device manager(unknown device).
It should work for xp,seven,vista.
I have a folder for android stuff like fastboot and adb that I keep for fixing my phone. I keep the minimum files required for fastboot to work... adb.exe, adbwinapi.dll, fastboot.exe and the 64bit usb drivers.
I used to be able to use fastboot even after formatting my computer (and reinstalling the drivers), but it's been a long time and when I tried to do the same again, it no longer works.
Windows says the driver is not compatible with the device. I download Android SDK Tools to download the usb drivers there. They install, but fastboot still doesn't detect the phone.
I tried following tutorials out there to get fastboot to work, but I tried on 2 HTC Dreams and they don't get detected. What am I missing?
Only thing I remember being different is that I'm using Windows 7 x64 SP1 now and before I was using plain Windows 7 x64.
You need to use the usb driver removal tool and install the usb driver from SDK.
yes you've got my same trouble.
this is my thread.. http://forum.xda-developers.com/showthread.php?t=1032249
i solved with backtrack 3.. don't ask me why because i don't know.. i just have a try with bt3 because i use bring it with me on my pendrive (it can ever be useful )
BeenAndroidized said:
You need to use the usb driver removal tool and install the usb driver from SDK.
Click to expand...
Click to collapse
The old drivers I had were never installed. For some reason, Windows did not recognize a compatible driver. I did download a fresh set of drivers from SDK and windows did install them, but fastboot devices is not listing anything.
P4p3r1n0 said:
yes you've got my same trouble.
this is my thread.. http://forum.xda-developers.com/showthread.php?t=1032249
i solved with backtrack 3.. don't ask me why because i don't know.. i just have a try with bt3 because i use bring it with me on my pendrive (it can ever be useful )
Click to expand...
Click to collapse
I see no reason why I can't use fastboot on Windows if it worked before. Perhaps if there is no other way, I'll try Linux distros.
It sound like there is no compatible driver for Windows 7 x64 SP1. Check google to see may be they might have an updates.
BeenAndroidized said:
It sound like there is no compatible driver for Windows 7 x64 SP1. Check google to see may be they might have an updates.
Click to expand...
Click to collapse
So there is an actual difference between win7 and sp1 in regards to the drivers and not that I set it up wrong?
From my experience on working with Windows. Every version always different. As far as how much different, I can't tell.
If you had it working with W7 before SP1, then there is a change in driver that causing it not to work correctly. Do you required to upgrade to W7 SP1? Or is that your preference?
BeenAndroidized said:
From my experience on working with Windows. Every version always different. As far as how much different, I can't tell.
If you had it working with W7 before SP1, then there is a change in driver that causing it not to work correctly. Do you required to upgrade to W7 SP1? Or is that your preference?
Click to expand...
Click to collapse
Well that's all I can think of. Just wanted to know if anyone else had problems with sp1. I think faastboot should work with my winxp vms.. gonna try that next time I try to use fastboot..
After searching a bit it seems most if not all rooting methods require the use of a Windows machine. Are there any resources for us mac users in terms of rooting the TF?
I'm not sure if there is an nvflash version for Mac. The nvidia developer's website show flashing features for Win and linux. I assume this means nvflash.
sent from my cyanogen(mod) vision
eep2378 said:
After searching a bit it seems most if not all rooting methods require the use of a Windows machine. Are there any resources for us mac users in terms of rooting the TF?
Click to expand...
Click to collapse
I've done it with Windows Seven on Parallels 6.
Be carefull to assign at the first time the asus usb to virtual machine in static way, otherwise you can loose the connection during the procedure and the software re-ask you where do you want to connect the usb...
DLuke77 said:
I've done it with Windows Seven on Parallels 6.
Be carefull to assign at the first time the asus usb to virtual machine in static way, otherwise you can loose the connection during the procedure and the software re-ask you where do you want to connect the usb...
Click to expand...
Click to collapse
I do have vmware on my Mac running win 7. Assign asus to virtual machine in static way? How would I go about that?
Sent from my GT-I9000 using XDA App
I never used VMWare...
But in parallels, with vm running, when i insert something in the usb, it prompt where the device will be seen, on the mac or on the vm.
There, there is a check box to "remind this selection" and it never ask you again pairing always taht device with vm.
Sorry, but i don't know where and if there is something like in VMWare
I think this will get you rooted on a Mac. You will need adb.
http://androidroot.mobi/asus-eee-pad-transformer-tf101-root-cwm-recovery/
eep2378 said:
After searching a bit it seems most if not all rooting methods require the use of a Windows machine. Are there any resources for us mac users in terms of rooting the TF?
Click to expand...
Click to collapse
When I rooted mine at the very beginning of June I just used this guide as a template.
Didn't need to install any extra drivers like Windows users do, I got adb from the link provided at the beginning of the guide and the followed each of the steps including downloading the rooting tools. The commands are the same but are entered slightly differently in OSX.
Example
In OSX you would type:
Code:
./adb devices
instead of Windows:
Code:
adb devices
If you've used OSX terminal before you should be fine.
I am using my laptop for ADB currently, but I want to know if it is possible to run ADB through windows in a Virtual Machine? I have gotten to where I have ADB running and the VM reconizeds the phone but as soon as I type,
Code:
adb devices
There is no response. Side note: I am using VMware and am running Tvall's CM7 on my phone.
Edit: solved was a driver issue
adb works when drivers for adb were installed
did you install drivers from Android SDK Tools?
at second you need turn usb debugging on (settings/applications/development)
5[Strogino] said:
adb works when drivers for adb were installed
did you install drivers from Android SDK Tools?
at second you need turn usb debugging on (settings/applications/development)
Click to expand...
Click to collapse
Yes I know this. The virtual machine knows the device is there(ADB drivers are installed) but in cmd it doesn't work. USB debugging is on, another option is the wireless ADB from CM7, but I have no idea how that works. Thanks for the help.
acseazzu said:
Yes I know this. The virtual machine knows the device is there(ADB drivers are installed) but in cmd it doesn't work. USB debugging is on, another option is the wireless ADB from CM7, but I have no idea how that works. Thanks for the help.
Click to expand...
Click to collapse
When connecting phone through usb debugging there is 'Android USB Devices' section in Device Manager (My Computer / Manage / System Tools / Device Manager). Do you have this section while connecting?
Wireless adb application establishes connection via custom port and adb can use this port to communicate with phone.
5[Strogino] said:
When connecting phone through usb debugging there is 'Android USB Devices' section in Device Manager (My Computer / Manage / System Tools / Device Manager). Do you have this section while connecting?
Wireless adb application establishes connection via custom port and adb can use this port to communicate with phone.
Click to expand...
Click to collapse
In device Manager it has "Android Composite ADB Interface" and a "HTC Android Device" My VM connects to HTC Android device, not letting me connect to it in ADB. Before I connect my device and before it installed the drivers I installed the Google driver package from AndroidSDK. Thanks for your help.
How did you fix it?
acseazzu said:
In device Manager it has "Android Composite ADB Interface" and a "HTC Android Device" My VM connects to HTC Android device, not letting me connect to it in ADB. Before I connect my device and before it installed the drivers I installed the Google driver package from AndroidSDK. Thanks for your help.
Click to expand...
Click to collapse
So how did you end up fixing this? I want to connect my phone to the VM.
This is happening to me right now. I have a VM Windows 7, it can detect a "HTC Android Device" but the platform-tool command line cant detect my phone. Even with ADB USB drivers, platform-tools, as well as HTC-sync installed.
How did you fix it? Please tell me
kazzarok said:
So how did you end up fixing this? I want to connect my phone to the VM.
This is happening to me right now. I have a VM Windows 7, it can detect a "HTC Android Device" but the platform-tool command line cant detect my phone. Even with ADB USB drivers, platform-tools, as well as HTC-sync installed.
How did you fix it? Please tell me
Click to expand...
Click to collapse
I uninstalled all the drivers (with USBdeview) and instead of installing with the Google Driver I used the HTC one for MyTouch 3G. I think I installed the drivers before I plugged in the phone. And also what software are you using to run your VM?
acseazzu said:
I uninstalled all the drivers (with USBdeview) and instead of installing with the Google Driver I used the HTC one for MyTouch 3G. I think I installed the drivers before I plugged in the phone. And also what software are you using to run your VM?
Click to expand...
Click to collapse
I am using Oracle VM Virtualbox. Doing VM Windows 7 under Ubuntu 11.10.
I have been trying a few times in the VM Windows 7. I tried the lastest HTC Sync 3.0.0.0 as well as the older version 2.0.3.3 that worked when I was using full Windows 7.
But in VM, nothing works
The VM win 7 can detect a USB Composite Device, but it cant find the correct driver.
edit:
Oh my god!! hopefully you still havent read this post yet because I just got it working!
In the settings of the VM, theres an option to enable USB 2.0
But to enable that, we must install the Oracle VM VirtualBox Extension Pack
It works!
edit2:
but somehow the transfer speed is really slow...
i guess i will just install windows again dual boot it
Yay! Congrats if I helped at all please hit the thanks button.
Sent from my Dream/Sapphire using XDA
acseazzu said:
Yay! Congrats if I helped at all please hit the thanks button.
Sent from my Dream/Sapphire using XDA
Click to expand...
Click to collapse
Not until you tell me about your VM
I want to know that because at the moment the transfering and intallation of APK files in Oracle VM VirtualBox is utterly slow (comparing with my old Win7 days), I am interested in other alternative VM which might be faster.
I see you mentioned VMware in you first post, I went to their website (link) but I see a lot different products... can you tell me which one you used, can you please tell me more about your VM?
Thanks in adcance.
edit:
Hey there again, I fainlly got VMware working.
I went for VMware Player 4.0.2. But for Ubuntu 12.04, we need a custom patch the VMware before it can run gracefully.
Not I have got it running now, VMware is so much faster than Oracle VM.
Thanks for the suggestsion!
kazzarok said:
Not until you tell me about your VM
I want to know that because at the moment the transfering and intallation of APK files in Oracle VM VirtualBox is utterly slow (comparing with my old Win7 days), I am interested in other alternative VM which might be faster.
I see you mentioned VMware in you first post, I went to their website (link) but I see a lot different products... can you tell me which one you used, can you please tell me more about your VM?
Thanks in advance.
edit:
Hey there again, I fainlly got VMware working.
I went for VMware Player 4.0.2. But for Ubuntu 12.04, we need a custom patch the VMware before it can run gracefully.
Not I have got it running now, VMware is so much faster than Oracle VM.
Thanks for the suggestsion!
Click to expand...
Click to collapse
I personally use Workstation. But for me VMware is alot faster than Oracle VM VirtualBox. Glad I could help
adb driver won't connect
I'm running windows parrallel on my mac. On the windows side I have the samsung drivers downloaded but when I go to root my phone the command line says doesn't recognize. Anyone know away I can get drivers to recognize phone when running virtual on a mac?