Related
I rooted my device yesterday and installed clockworkmod, then i was going to install a new rom on my device. But i decided to this the next day, but i still deleted
cache and did a factory reset, When i booted up i didnt find superuser and i downloaded titanium backup and the programe said i was not rooted.
So i installed visionary r12 and it said im rooted. what Now?
Now i uninstalled r12, and unstalled r14, and got everything to work,
now i want to take a backup but in rom manager when i press backup rom, it tells me
E:cant open /cache/recovery/comand
Have you turned Security Off (S-OFF)?
Yes i installed s-off before factory reset, shuld i try to do it again
In ROM Manager try to flash ClockworkMod Recovery again. Most users note that it doesn't work first time.
I find more assuring to make a backup from within CWM Recovery. Six and 2 Threes I know.
It worked to reflash clockwork. Thank you<3
No problem.
Dear XDA
I have been an android user for many years and rooting has been one of the things I always did to my devices. I am an owner of a Note 3, which I have rooted succesfully and used X-NOTE 13 rom for long time. Last week I wanted to try something new and after that everything seems to be impossible. Before I install any roms I always perfom full wipe of, system, data, cache, dalvik cache etc. (I do it inside the recovery). Afterwards I tried to install CRASH ROM V9 and the progress went fine. When the phone rebooted the strange things started to happened I couldn't find the rom's extra menu and couldnt find any of the functions that the rom contained. I just thought that it was problem with the rom itself therefore I tried to went back to X-NOTE, but without any luck. The X-NOTE installed probably but I couldnt boot into it, it was stucked at the "Samsung Note 3" logo. I tried to wipe cache and dalvik but without any luck and every time I rebooted from the recovery the recovery says "it seems your device doesnt have root access" and the recovery tries to gain root access.
Then I couldnt understand anything of what was happening so I went to stock using ODIN. After installing stock rom I used CF-ROOT and everythings went smooth and I could use SuperSU inside the stock rom. Then I installed a recovery and it didn't mentioned anything about root access, so I was ready to install my custom rom...at least I thought so....I installed X-NOTE again (because I knew that this rom worked before without any problems) and after the progress was done I couldnt boot into the rom again, it was stucked. I wiped the cache and dalvik and as soon I clicked reboot in recovery it tells me that I am not rooted.
Then I did the same thing again, went back to stock, installed CF-ROOT and recovery. This time I installed CRASH ROM instead and I could boot into the system, but the rom still misses the "rooted features" etc.
In other words, what have I done wrong? I cant seem to find the problem and I think that I have tried every possible solution?
Informations:
Model: SM-N9005
STOCK ROM: Tried both N9005XXUENB4 (German) and N9005XXUENC2 (Nordic firmware)
Custom Rom: Tried both X-NOTE and CRASH ROM
Recoveries used: TWRP, CWM and Philz CWM
Kernels: Tried with stock one and X-NOTE kernel 1.5
I hope you can help me I cant live with stock roms
Thanks in advance
Regards,
Nepoznati
Nepoznati said:
Dear XDA
I have been an android user for many years and rooting has been one of the things I always did to my devices. I am an owner of a Note 3, which I have rooted succesfully and used X-NOTE 13 rom for long time. Last week I wanted to try something new and after that everything seems to be impossible. Before I install any roms I always perfom full wipe of, system, data, cache, dalvik cache etc. (I do it inside the recovery). Afterwards I tried to install CRASH ROM V9 and the progress went fine. When the phone rebooted the strange things started to happened I couldn't find the rom's extra menu and couldnt find any of the functions that the rom contained. I just thought that it was problem with the rom itself therefore I tried to went back to X-NOTE, but without any luck. The X-NOTE installed probably but I couldnt boot into it, it was stucked at the "Samsung Note 3" logo. I tried to wipe cache and dalvik but without any luck and every time I rebooted from the recovery the recovery says "it seems your device doesnt have root access" and the recovery tries to gain root access.
Then I couldnt understand anything of what was happening so I went to stock using ODIN. After installing stock rom I used CF-ROOT and everythings went smooth and I could use SuperSU inside the stock rom. Then I installed a recovery and it didn't mentioned anything about root access, so I was ready to install my custom rom...at least I thought so....I installed X-NOTE again (because I knew that this rom worked before without any problems) and after the progress was done I couldnt boot into the rom again, it was stucked. I wiped the cache and dalvik and as soon I clicked reboot in recovery it tells me that I am not rooted.
Then I did the same thing again, went back to stock, installed CF-ROOT and recovery. This time I installed CRASH ROM instead and I could boot into the system, but the rom still misses the "rooted features" etc.
In other words, what have I done wrong? I cant seem to find the problem and I think that I have tried every possible solution?
Informations:
Model: SM-N9005
STOCK ROM: Tried both N9005XXUENB4 (German) and N9005XXUENC2 (Nordic firmware)
Custom Rom: Tried both X-NOTE and CRASH ROM
Recoveries used: TWRP, CWM and Philz CWM
Kernels: Tried with stock one and X-NOTE kernel 1.5
I hope you can help me I cant live with stock roms
Thanks in advance
Regards,
Nepoznati
Click to expand...
Click to collapse
weird.
all the rom you mentioned xnote & crash come with root access inside.
When you said you used all those 3 recoveries, did you try each rom with each recovery ?
and when you flash those rom, did you follow to do a clean full wipe as mentioned on each OP thread ?
clean full wipe is not only wipe cache and dalvik, but also the data (factory reset).
antique_sonic said:
weird.
all the rom you mentioned xnote & crash come with root access inside.
When you said you used all those 3 recoveries, did you try each rom with each recovery ?
and when you flash those rom, did you follow to do a clean full wipe as mentioned on each OP thread ?
clean full wipe is not only wipe cache and dalvik, but also the data (factory reset).
Click to expand...
Click to collapse
Yes I have and tried several other combinations too. First time I installed X-NOTE I wiped everything and installed X-NOTE without problems.
I cant seem to break the code, I am getting frustrated hour by hour. I have double checked everything, I am on the NC2 bootloader with the NC2 kernel, when trying to install X-NOTE I get stuck at "Samsung Glaxy Note 3" - I cant understand what the problem may be and it is beginning to be personal :/ heheh
But seriously what could I have done wrong?
Nepoznati said:
Yes I have and tried several other combinations too. First time I installed X-NOTE I wiped everything and installed X-NOTE without problems.
I cant seem to break the code, I am getting frustrated hour by hour. I have double checked everything, I am on the NC2 bootloader with the NC2 kernel, when trying to install X-NOTE I get stuck at "Samsung Glaxy Note 3" - I cant understand what the problem may be and it is beginning to be personal :/ heheh
But seriously what could I have done wrong?
Click to expand...
Click to collapse
To be frank... I have no idea. U flash before earlier, means u know how to flash it.
What I could think of, is just the recovery.
I ve been using cwm chenglu all this time (the one reported with less bugs, and most recommended at any rom thread). And jump from rom to rom every 1 week at least with no issue.
I will try tonite use twrp to flash rom. I will let u know if I face any problem.
SOLVED
antique_sonic said:
To be frank... I have no idea. U flash before earlier, means u know how to flash it.
What I could think of, is just the recovery.
I ve been using cwm chenglu all this time (the one reported with less bugs, and most recommended at any rom thread). And jump from rom to rom every 1 week at least with no issue.
I will try tonite use twrp to flash rom. I will let u know if I face any problem.
Click to expand...
Click to collapse
Finally, finally and finally solved!
Well it seems strange but the problem was the official kernel inside the stock roms that made it almost impossible to run any custom rom.
What I did to solve the problem:
1. Went back to stock rom using a rom with the newest baseband NC2, ex. N9005XXUENC2
1a. I did have som problems getting the bootloader updated, which means I was force to install it over ODIN 3.09 - use this bootloader NC2 BOOTLOADER (Thanks soloilmeglio for the bootloader)
2. I used CF-ROOT to gain root access
3. Then I installed CWM 6.0.4.8 recovery as recommended from antique_sonic (Updated few hours ago!)
4. Install the CivZ-SnapKat-Rev3.1-sm_n9005-4.4.2.zip kernel
5. Lets the phone reboot and check that everything works!
7: Boot into recovery and wipe system, data, cache, dalvik cache
8. Install the custom rom
Dont ask me why the kernel wasn't working from beginning and why it was "corrupted" after installing another custom rom - but now everything works as it should!
Thank you very much antique_sonic for helping me!
Nepoznati said:
Finally, finally and finally solved!
Well it seems strange but the problem was the official kernel inside the stock roms that made it almost impossible to run any custom rom.
What I did to solve the problem:
1. Went back to stock rom using a rom with the newest baseband NC2, ex. N9005XXUENC2
1a. I did have som problems getting the bootloader updated, which means I was force to install it over ODIN 3.09 - use this bootloader NC2 BOOTLOADER (Thanks soloilmeglio for the bootloader)
2. I used CF-ROOT to gain root access
3. Then I installed CWM 6.0.4.8 recovery as recommended from antique_sonic (Updated few hours ago!)
4. Install the CivZ-SnapKat-Rev3.1-sm_n9005-4.4.2.zip kernel
5. Lets the phone reboot and check that everything works!
7: Boot into recovery and wipe system, data, cache, dalvik cache
8. Install the custom rom
Dont ask me why the kernel wasn't working from beginning and why it was "corrupted" after installing another custom rom - but now everything works as it should!
Thank you very much antique_sonic for helping me!
Click to expand...
Click to collapse
Good then to know ur phone is okay.
I fully wipe with twrp last nite. And flash xnote. Hang at boot after done.
Fully wipe again, and flash assassins. A lot fc here and there.
I flash back cwm chenglu, full wipe, and flash back xnote. Now it runs nicely.
My phone not suit with twrp.
antique_sonic said:
Good then to know ur phone is okay.
I fully wipe with twrp last nite. And flash xnote. Hang at boot after done.
Fully wipe again, and flash assassins. A lot fc here and there.
I flash back cwm chenglu, full wipe, and flash back xnote. Now it runs nicely.
My phone not suit with twrp.
Click to expand...
Click to collapse
It could probably be a problem with TWRP as you mentioned earlier. After using CWM everything went smooth after updating my kernel. Last night I couldnt hold me back to try one more time, and I flashed X-NOTE with TWRP and I got the same problem as described in #1 post. Then I installed CWM and flashed X-NOTE again and everything got messed up. Then I restored everything, force installed the kernel and bootlaoder. After that installed CWM and then I was able to run X-NOTE without any problem.
I am not a professional developer but I may think that the problem is TWRP when it tries to flash the kernel under the process with may results in some problems. When using CWM from the beginning I do not get any problems but when using TWRP I need to restore everything back.
Hello guys.
I want to downgrade my defy+ from CM11 to stock android.
Before update the recovery and install CM11 i made a backup with CWM and now i want to restore this backup.
How can i do this? Can i install CWM using the kitkat on my phone?
Sorry for the dumb question, but I'm afraid of doing something wrong.
lucashs said:
Hello guys.
I want to downgrade my defy+ from CM11 to stock android.
Before update the recovery and install CM11 i made a backup with CWM and now i want to restore this backup.
How can i do this? Can i install CWM using the kitkat on my phone?
Sorry for the dumb question, but I'm afraid of doing something wrong.
Click to expand...
Click to collapse
I have discovered that I need it too because my phone is loked and, to enter my carrier unlock code, i need to restore my backup made with CWM.
Looking for the same.
Yesterday i have installed 2ndInit to get back CWM recovery and restore my original stock ROM image.
Android can not complete the full boot, showing the intro of my carrier during a hour while loading Android.
Reinstalled TWRP and recovered my CM11 backup.
I will try again and, if not suceded, i will flash my carrier SBF to unlock my phone.
I will inform any news about CWM restore stock ROM.
TicoDePano said:
Yesterday i have installed 2ndInit to get back CWM recovery and restore my original stock ROM image.
Android can not complete the full boot, showing the intro of my carrier during a hour while loading Android.
Reinstalled TWRP and recovered my CM11 backup.
I will try again and, if not suceded, i will flash my carrier SBF to unlock my phone.
I will inform any news about CWM restore stock ROM.
Click to expand...
Click to collapse
I think this happens because the roms use different file systems
Try the Aroma Wiper to change the file system:
http://forum.xda-developers.com/showthread.php?t=2202674
I'll try this, but now i'm without time, then i report if it work.
I got my phone working.
http://forum.xda-developers.com/motorola-defy/help/tim-brasil-signal-cm11-t2824983#post54683596
About revert to stock ROM, only doing a factory reset to format my data partition fix the boot (I did not try AROMA or safewipe.zip).
I do not tried to restore data from my stock dump after got my phone working because it was not my objective, but i think that it is possible and simple after get it working.
Thanks.
Alright, so I'm thinking my problem was that i initially had supersu installed when attempting to install this kernel, and thus causing that bootloop.
Can anyone provide insight as to whether this is true. I had a nandroid backup of my stock rom and even though I "restored" it, it was still stuck in bootloop regardless :/. I don't want to keep restarting and reinstalling everything over and over without knowing what the problem is.
I currently run Resurrection Remix with xposed. I'm fearing if I make another nandroid backup for this and try to flash the rom again, it won't work and I have to start again.
FYI: I was on RR when I attempted the kernel install.
Try downloading the kernel again and dirty flash it. If that doesn't work try dirty flashing some other kernel. And if that doesn't work dirty flash your rr rom. And if still not working then restore your backup
billamin said:
Try downloading the kernel again and dirty flash it. If that doesn't work try dirty flashing some other kernel. And if that doesn't work dirty flash your rr rom. And if still not working then restore your backup
Click to expand...
Click to collapse
well what i did was following:
round 1. RR rom already installed
wipe cache and delvik, install kernal, bootloop
attempt to restore nandroid., still bootloop,
attempt 2:
wipe everything and install RR, SU, Gapps
did setup
installed franko r25
attempt 3.
wipe and factory reset
restore nandroid
bootloop
attempt 4
DONT install franco and install ak. after everything
works
Franco kernel needs to be installed twice to work. flash kernel, dont restart, just flash again
feis said:
Franco kernel needs to be installed twice to work. flash kernel, dont restart, just flash again
Click to expand...
Click to collapse
omg thanks! that worked perfectly. Now a new problem is specifically when I'm using tugapower, while typing on my swiftkey into the xda forum. I'm noticing a lag. I've made it so then both apps are operating on performance with franco. Not sure what's causing the lag. Is it possibly the theme?
Dunno whats the problem, but im pretty sure if you just flashed franco, didnt change anything and used those apps, they wouldnt lag
didn't figure out what caused the lag but its gone now
Hello, so im stuck now on startup. I actually rooted my phone a week ago and everything's fine until I've downloaded some cracked apks online and restarted my phone. Please help what would i do now
imgur.com/a/07UWA4l
Did you installed Twrp...if yes then you might want clear cache and restart the phone or you could just reflash the rom or any other custom rom....and if you havn't then i am afraid you will have to lose your data..
Paramvir Singh said:
Did you installed Twrp...if yes then you might want clear cache and restart the phone or you could just reflash the rom or any other custom rom....and if you havn't then i am afraid you will have to lose your data..
Click to expand...
Click to collapse
yes yes i've installed twrp, i've actually tried formatting my data, clearing dalvik cache (thru twrp) then restarted it but still stuck at loading zenfone logo. i dont care bout my data on phone, just wanna get my phone back to normal.
can u please elaborate bout reflashing rom? i've never done flashing any rom before , stock or custom,
Never done this on my M1 but on my note edge,
When i got a bootloop, i simply reinstall stock rom, or just clean install custom rom
abcnormal said:
yes yes i've installed twrp, i've actually tried formatting my data, clearing dalvik cache (thru twrp) then restarted it but still stuck at loading zenfone logo. i dont care bout my data on phone, just wanna get my phone back to normal.
can u please elaborate bout reflashing rom? i've never done flashing any rom before , stock or custom,
Click to expand...
Click to collapse
Ok so it's good opportunity to try something new...first you need to download custom rom and gapps package to sd card (always a better option)or internal storage...do the downloads on pc or somewhere else...
1. Wipe cache, dalvik cache, system, vendor, data, internal storage(this one is optional)
2. Mount extsd card
3. Install Rom package...(i personally use xenonhd based on pie) from here https://mirrors.c0urier.net/android...tal/X00T/XenonHD-181007-Experimental-X00T.zip
You can try any other of your choice
4. Install Gapps package from here..http://download2264.mediafire.com/r0vq21tabscg/m1u4llu62bdwyos/BiTGApps-arm64-9.x.x-0.1-unsigned.zip
5. This step is optional if you want root access then flash magisk package from here..https://github.com/topjohnwu/Magisk/releases/download/v17.1/Magisk-v17.1.zip and uninstall package from https://github.com/topjohnwu/Magisk/releases/download/v17.2/Magisk-uninstaller-20180921.zip ......after tge rom boot up install magisk manager from https://github.com/topjohnwu/Magisk/releases/download/manager-v6.0.0/MagiskManager-v6.0.0.apk
6. Reboot to system..first boot up will take 4-5 minutes...ENJOY
so i tried flashing the stock rom but i got an error
Code:
[B] This package is for "ASUS_X00TD" devices; this is a "X00TD"[/B]
i got the rom at asus.com/ph/Phone/ZenFone-Max-Pro-ZB602KL/HelpDesk_BIOS/
i guess i'll try flashing with a custom rom instead?
also a follow up question: is it safe to reboot to recovery with twrp even my phone has no OS installed (already wiped it for flashing a new rom)
abcnormal said:
so i tried flashing the stock rom but i got an error
Code:
[B] This package is for "ASUS_X00TD" devices; this is a "X00TD"[/B]
i got the rom at asus.com/ph/Phone/ZenFone-Max-Pro-ZB602KL/HelpDesk_BIOS/
i guess i'll try flashing with a custom rom instead?
also a follow up question: is it safe to reboot to recovery with twrp even my phone has no OS installed (already wiped it for flashing a new rom)
Click to expand...
Click to collapse
Stock rom available at asus website is not flashable through twrp...u need twrp flashable zip...download this file...
https://forum.xda-developers.com/showpost.php?p=77671149&postcount=83
And also decrypt file from here.... https://forum.xda-developers.com/asus-zenfone-max-pro-m1/how-to/mod-decrypt-data-t3787311
After flashing the rom...flash decrypt zip
And remember to wipe internal storage after flashing these two zips!
Hello sir i got stuck in bootloop in asus max pro m1
Actually its not showing anything screen is blinking as i try to turn it on. I was on custom rom and suppose to install stock rom and i followed every step but my phone doesn’t start its just reboot and nothing displays anything. Please can anyone tell me the solution of this issue.
did u solved issue
how did u soolves issue ??