I got stuck at moto M and went to flash .sbf but rsdlite will not detect my defy. I tried all kind of versions. I am using windows vista. Now i am stuck. Any suggestions?
Make sure it's version 4.9 or higher. Have you downloaded the drivers? Are you in boot loader mode? Did you run RSD Lite as admin?
rbeier1221 said:
Make sure it's version 4.9 or higher. Have you downloaded the drivers? Are you in boot loader mode? Did you run RSD Lite as admin?
Click to expand...
Click to collapse
I did all that still no success. $400 down the drain
I hate Motorola.
I can see my phone in 'device manager' as 'Motorola flash interface' yet it wont show in rsd lite.
grannyrogers said:
I did all that still no success. $400 down the drain
I hate Motorola.
I can see my phone in 'device manager' as 'Motorola flash interface' yet it wont show in rsd lite.
Click to expand...
Click to collapse
Try another pc i had the same problem
Sent from my MB525 using XDA Premium App
Try this: http://www.multiupload.com/1U4GCLROW3
RSD Lite 5.3.1 and Moto USB Driver.
I had the same problem, but finally got fixed when using this.
Hope can help u
If you are on Win 7 (maybe also Vista) you have to run RSD Lite as Administrator, otherwise it won't do anything. Also make sure you have the correct drivers installed (32bit vs. 64bit).
Have you tried to turn off or on usb debugging?
Guys I got it working. Thanks for the ideas. I removed some belkin router software that was hugging the usb ports and bam! Phone shows in RSD lite immediately.
Sent from my MB525 using XDA Premium App
grannyrogers said:
Guys I got it working. Thanks for the ideas. I removed some belkin router software that was hugging the usb ports and bam! Phone shows in RSD lite immediately.
Sent from my MB525 using XDA Premium App
Click to expand...
Click to collapse
now you should edit your post3... i love moto...
it worked! belkin crap was to blame!
grannyrogers said:
Guys I got it working. Thanks for the ideas. I removed some belkin router software that was hugging the usb ports and bam! Phone shows in RSD lite immediately.
Sent from my MB525 using XDA Premium App
Click to expand...
Click to collapse
Oh Thank you thank you thank you!
You are my saviour!!!!
I thought I had lost my defy and that I would have to do the battery fix, but then I ran into your post and I removed that pathetic Belkin USB crap and RSDLite could detect my phone!
I had flashed Nordic Froyo to my Indian defy and wanted to flash the official Indian Froyo.
Since I had a nandroid backup, I reached the point where I had to flash eclair fixed sbf and thats where I couldn't get Defy to get recognised in RDSLite. The log always showed "ERROR: PSTInitialize failed: Error Code 1"
After I saw your post, I promptly uninstalled that belkin software and voila! I could see my device in RSDLite and flashed the fixed sbf.
Words can't express my gratitude!
Thanks again!!!
Krusadr said:
Oh Thank you thank you thank you!
You are my saviour!!!!
I thought I had lost my defy and that I would have to do the battery fix, but then I ran into your post and I removed that pathetic Belkin USB crap and RSDLite could detect my phone!
I had flashed Nordic Froyo to my Indian defy and wanted to flash the official Indian Froyo.
Since I had a nandroid backup, I reached the point where I had to flash eclair fixed sbf and thats where I couldn't get Defy to get recognised in RDSLite. The log always showed "ERROR: PSTInitialize failed: Error Code 1"
After I saw your post, I promptly uninstalled that belkin software and voila! I could see my device in RSDLite and flashed the fixed sbf.
Words can't express my gratitude!
Thanks again!!!
Click to expand...
Click to collapse
You are welcome.
Sent from my MB525 using XDA Premium App
This worked like a charm for my Photon!!
grannyrogers said:
Guys I got it working. Thanks for the ideas. I removed some belkin router software that was hugging the usb ports and bam! Phone shows in RSD lite immediately.
Sent from my MB525 using XDA Premium App
Click to expand...
Click to collapse
Krusadr said:
Oh Thank you thank you thank you!
You are my saviour!!!!
I thought I had lost my defy and that I would have to do the battery fix, but then I ran into your post and I removed that pathetic Belkin USB crap and RSDLite could detect my phone!
I had flashed Nordic Froyo to my Indian defy and wanted to flash the official Indian Froyo.
Since I had a nandroid backup, I reached the point where I had to flash eclair fixed sbf and thats where I couldn't get Defy to get recognised in RDSLite. The log always showed "ERROR: PSTInitialize failed: Error Code 1"
After I saw your post, I promptly uninstalled that belkin software and voila! I could see my device in RSDLite and flashed the fixed sbf.
Words can't express my gratitude!
Thanks again!!!
Click to expand...
Click to collapse
VDub2174 said:
This worked like a charm for my Photon!!
Click to expand...
Click to collapse
Sweet! glad it helped
Sent from my MB525 using xda premium
Need ur help
rachit2588 said:
now you should edit your post3... i love moto...
Click to expand...
Click to collapse
Hi, i'm facing the same problem but im not able to resolve it, cn u help me with the steps that u hv taken???
---------- Post added at 12:41 PM ---------- Previous post was at 12:29 PM ----------
grannyrogers said:
You are welcome.
Sent from my MB525 using XDA Premium App
Click to expand...
Click to collapse
Hi,
Im not able to c my defy Rsd... cn u help me with the steps...
Manishsharma15 said:
Hi, i'm facing the same problem but im not able to resolve it, cn u help me with the steps that u hv taken???
---------- Post added at 12:41 PM ---------- Previous post was at 12:29 PM ----------
Hi,
Im not able to c my defy Rsd... cn u help me with the steps...
Click to expand...
Click to collapse
Do you have belkin router software installed?
grannyrogers said:
Do you have belkin router software installed?
Click to expand...
Click to collapse
I have the same issue...I have downloaded all the drivers and latest Rsdlite and i dont have any belkin software installed...
I had cwm 7 and its stuck at google bootloader screen and rsd dont recognise my defy
---------- Post added at 05:09 PM ---------- Previous post was at 04:41 PM ----------
Knowpain said:
I have the same issue...I have downloaded all the drivers and latest Rsdlite and i dont have any belkin software installed...
I had cwm 7 and its stuck at google bootloader screen and rsd dont recognise my defy
Click to expand...
Click to collapse
I have manged to do it and my phone is back on in working condition
whoooop
thanks guys
Change to USB 2.0
Change to USB 2.0
Related
I got this update on my phone, but then when I saw PC Companion saying that I can get the legit 2.1 version, I tried it out, but now my phone will not turn on.
This is the update I got.
http://forum.xda-developers.com/showthread.php?t=825201
Is there a way to fix my phone without sending it in?
Yes there is download the new flasher and reinstall its you can't go wrong just follow the instructions
Thank you very much.
I will try it and see how it goes.
Actually, could you link me to the page where I can download it?
peterrchoi said:
Actually, could you link me to the page where I can download it?
Click to expand...
Click to collapse
YEa try http://forum.xda-developers.com/showthread.php?t=928343
Good luck!
Thank you very much.
http://forum.xda-developers.com/showthread.php?t=920746 and do the dual touch, it works. to root, find the newer version of the flashtool. i had the same problem, this fixed it right up, plus its way faster once you remove some stock apps
Sent from my X10a using XDA App
peterrchoi said:
I got this update on my phone, but then when I saw PC Companion saying that I can get the legit 2.1 version, I tried it out, but now my phone will not turn on.
This is the update I got.
http://forum.xda-developers.com/showthread.php?t=825201
Is there a way to fix my phone without sending it in?
Click to expand...
Click to collapse
tell me more about the problem. i had the same problem with an update that i did and i ended up having two problems. one my data cable was trash and two the flash tool i was using was trash. i will be glad to help in any way i can. please pm and ill do what i can to assist you in getting it up and running
SErooted said:
tell me more about the problem. i had the same problem with an update that i did and i ended up having two problems. one my data cable was trash and two the flash tool i was using was trash. i will be glad to help in any way i can. please pm and ill do what i can to assist you in getting it up and running
Click to expand...
Click to collapse
Here is a link to the flasher http://forum.xda-developers.com/showthread.php?t=920746 . You say that the phone does not work, could you explain on that, is it that your phone keeps rebooting or is it that it gets stuck at the Sony ericsson boot logo?
I've bought a new MOTO MB526 with silver keys, and then I try to flash the MIUI into it....OMG,it's dead.
Many versions of defy+'s SBF profiles had been used. The version of its factorysets' SBF is 2.3.6, now how can I save my phone?
Well, I got some information from China Android forums, they said that the bootloader of my phone is higher than the level 5 now. And Series of November products will be like this after RSD flashing any SBF.
Who can offer me a usable SBF for thousands China Dedy+ fans, THX.
wipe data in stock recovery abd send to service...
Sent from my MB525 using xda premium
nogoodusername said:
wipe data in stock recovery abd send to service...
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
NO,NO,NO...now I can never enter into the recovery mode...only a white light can work while I connect the phone with PC and RSD also can know it...but...
Try this one http://forum.xda-developers.com/showthread.php?t=1263212 or this one http://forum.xda-developers.com/showthread.php?t=1127085 and if it wont help wait for new chinese rom or maybe downgrading process will help you but I'm not really sure about bootloader.
Chamelleon said:
Try this one http://forum.xda-developers.com/showthread.php?t=1263212 or this one http://forum.xda-developers.com/showthread.php?t=1127085 and if it wont help wait for new chinese rom or maybe downgrading process will help you but I'm not really sure about bootloader.
Click to expand...
Click to collapse
I'm sure that this version of SBF cannot be used into these new MOTO MB526, what a pity! Now I need a SBF with a higher version of CM39 and other profiles, or even I will guess that our 526 phones are real defy+?
Will we hope for the GOOMO(Google and MOTO) phone?
iray89108 said:
I'm sure that this version of SBF cannot be used into these new MOTO MB526, what a pity! Now I need a SBF with a higher version of CM39 and other profiles, or even I will guess that our 526 phones are real defy+?
Will we hope for the GOOMO(Google and MOTO) phone?
Click to expand...
Click to collapse
you're so unlucky now...
just checked on mfunz and it seems that all you can do now is wait!
good luck!!
MB 526 in white light
tomarsenal said:
you're so unlucky now...
just checked on mfunz and it seems that all you can do now is wait!
good luck!!
Click to expand...
Click to collapse
Hi,
Any update on above issue i have also try to up date and its now on WHite light...
Anyone can guide me the right process to make my phone alive.
Thanks
Regards,
can you tell me how to root ZTE Blade 3 Pro ?
thank you )
Bin4ry Root:
http://forum.xda-developers.com/showthread.php?t=1886460
[email protected] said:
Bin4ry Root:
http://forum.xda-developers.com/showthread.php?t=1886460
Click to expand...
Click to collapse
nah, it didnt work i try it its say Running... and show up restore my data in my phone i restored and nothing happens...
Andrej732 said:
nah, it didnt work i try it its say Running... and show up restore my data in my phone i restored and nothing happens...
Click to expand...
Click to collapse
did tou find how to root ????
Zte Blade 3 PRO
Andrej732 said:
nah, it didnt work i try it its say Running... and show up restore my data in my phone i restored and nothing happens...
Click to expand...
Click to collapse
ilievski.ace said:
did tou find how to root ????
Zte Blade 3 PRO
Click to expand...
Click to collapse
Sent from my Xperia S using xda app-developers app
No it is not working vhit that ....
Sent from my ZTE Blade III Pro using xda premium
ilievski.ace said:
No it is not working vhit that ....
Sent from my ZTE Blade III Pro using xda premium
Click to expand...
Click to collapse
You tried this? :/
www.modaco.com/topic/362795-step-by-step-how-to-root-cwm-zte-blade-iii/
Sent from my Xperia S using xda app-developers app
No Friz on load bootloder
No succeed again help pleace ...
Another option ?
Sent from my ZTE Blade III Pro using xda premium
lol, there isn't anyway to root this phone?
Here you go, lads, Andrej732 already tested, working for Macedonian T-Mobile version. Other versions not tested, but you can try at your own risk. I am not responsible for any damage you do to your phone, so be aware of that. The root itself doesn't flash anything to NAND, so there is very low risk of bricking your phone. Instructions are on serbian, I will translate if needed, but basically, you plug the usb to the phone, enable USB debugging on the phone and run the script (batch file). You need ADB and fastboot drivers, download them from ZTE web page. Cheers!
ZTE BLADE 3 PRO ROOT MACEDONIAN T-Mobile version
Code:
https://dl.dropboxusercontent.com/u/6184905/Blade3ProRoot.rar
fluxx_srb said:
Here you go, lads, Andrej732 already tested, working for Macedonian T-Mobile version. Other versions not tested, but you can try at your own risk. I am not responsible for any damage you do to your phone, so be aware of that. The root itself doesn't flash anything to NAND, so there is very low risk of bricking your phone. Instructions are on serbian, I will translate if needed, but basically, you plug the usb to the phone, enable USB debugging on the phone and run the script (batch file). You need ADB and fastboot drivers, download them from ZTE web page. Cheers!
ZTE BLADE 3 PRO ROOT MACEDONIAN T-Mobile version
Code:
https://dl.dropboxusercontent.com/u/6184905/Blade3ProRoot.rar
Click to expand...
Click to collapse
Yap everything works fine thanks to you <3! Cheers!
Thank you agian fluxx!
Andrej732 said:
Yap everything works fine thanks to you <3! Cheers!
Thank you again fluxx!
Click to expand...
Click to collapse
I've tried and it doesn't relay works.
I'm also like Andrej732 from MK, but here it what happens:
Followed everything, phone restarts, i push any button on pc, load some files for root, but on the phone stuck at the green android logo.
Waited hour, nothing.
No zte logo, no nothing.
Plug out of usb, get battery off and on. Tried a couple of times and all the same.
Help!!!
P.S.
Registered here only for this, so...
It is working tray another usb port an take all the files and copy them to c:/ it will work ....
Sent from my ZTE Blade III Pro using Tapatalk 4 Beta
sepanen this
boskovdime said:
I've tried and it doesn't relay works.
I'm also like Andrej732 from MK, but here it what happens:
Followed everything, phone restarts, i push any button on pc, load some files for root, but on the phone stuck at the green android logo.
Waited hour, nothing.
No zte logo, no nothing.
Plug out of usb, get battery off and on. Tried a couple of times and all the same.
Help!!!
P.S.
Registered here only for this, so...
Click to expand...
Click to collapse
ilievski.ace said:
It is working tray another usb port an take all the files and copy them to c:/ it will work ....
Sent from my ZTE Blade III Pro using Tapatalk 4 Beta
Click to expand...
Click to collapse
I have the same problem, it's stuck on the logo, tried other usb port, tried on my laptop and desktop, everytime the same, what to do ?
you should install http://pdanet.co/a/ with your blade III pro plugged and usb debugging turn on
Andrej732 said:
you should install with your blade III pro plugged and usb debugging turn on
Click to expand...
Click to collapse
did that and it says pdanet connected, still when i load the root it stucks on the logo,i have enabled usb debugging and tether
viktorrxda said:
did that and it says pdanet connected, still when i load the root it stucks on the logo,i have enabled usb debugging and tether
Click to expand...
Click to collapse
here's the same with me.
I'm doing this right now.
boskovdime said:
here's the same with me.
I'm doing this right now.
Click to expand...
Click to collapse
For root extract all the files from the file in c:/ an it will work if not ... tray another usb port ....
Sent from my ZTE Blade III Pro using Tapatalk 4 Beta
ilievski.ace said:
For root extract all the files from the file in c:/ an it will work if not ... tray another usb port ....
Sent from my ZTE Blade III Pro using Tapatalk 4 Beta
Click to expand...
Click to collapse
rootsrbija.iz.rs/root-zte-blade-iii-pro/
already tried everything, simply freezes at the logo
viktorrxda said:
rootsrbija.iz.rs/root-zte-blade-iii-pro/
already tried everything, simply freezes at the logo
Click to expand...
Click to collapse
Tray the unplug the cable an plug it in when search for device...
Sent from my ZTE Blade III Pro using Tapatalk 4 Beta
---------- Post added at 10:44 AM ---------- Previous post was at 10:41 AM ----------
Tray to unplug the device from usb and plug it in when searching for device ...
Sent from my ZTE Blade III Pro using Tapatalk 4 Beta
I was using original stock 4.1.1 version + http://forum.xda-developers.com/showthread.php?t=2166542&highlight=98+18+94 to use xt907 on t-mobile.
Yesterday, I used RSD to restore the 4.1.1 version and OTAed to the latest 98.30.1.XT907.Verizon ROM. Then the t-mobile sim does not work any more, and the original method does not work.
Then I tried to downgrade 4.1.1 version using RSD, and failed. Then I'm stuck in the fastboot mode...
My question is:
1. Is there a way that I can get out of fastboot mode? Which rom should I use in RSD to restore?
2. Is there a way that I can downgrade to earlier version?
3. Is there a way that I can still use t-mobile sim card?
Thanks
You might be able to use the droid razr m utility but I'm no expert in it. I've just dabbled around in all of this. Wait for some insight from Rikrong or someone of the sort.
Sent from my XT907 using xda app-developers app
---------- Post added at 09:24 AM ---------- Previous post was at 09:20 AM ----------
That my suggested answer for question one, but I may be wrong so wait for some insight from someone who knows exactly what's wrong.
Sent from my XT907 using xda app-developers app
danielcdh said:
I was using original stock 4.1.1 version + http://forum.xda-developers.com/showthread.php?t=2166542&highlight=98+18+94 to use xt907 on t-mobile.
Yesterday, I used RSD to restore the 4.1.1 version and OTAed to the latest 98.30.1.XT907.Verizon ROM. Then the t-mobile sim does not work any more, and the original method does not work.
Then I tried to downgrade 4.1.1 version using RSD, and failed. Then I'm stuck in the fastboot mode...
My question is:
1. Is there a way that I can get out of fastboot mode? Which rom should I use in RSD to restore?
2. Is there a way that I can downgrade to earlier version?
3. Is there a way that I can still use t-mobile sim card?
Thanks
Click to expand...
Click to collapse
poppers162 said:
You might be able to use the droid razr m utility but I'm no expert in it. I've just dabbled around in all of this. Wait for some insight from Rikrong or someone of the sort.
Sent from my XT907 using xda app-developers app
---------- Post added at 09:24 AM ---------- Previous post was at 09:20 AM ----------
That my suggested answer for question one, but I may be wrong so wait for some insight from someone who knows exactly what's wrong.
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Poppers, you're on point. However, there's no Razr M utility for the latest update. You can use House of Moto from DroidRzr or flash the latest OTA with RSD.
Daniel, since you updated to .1, you can't downgrade. Just grab the last FXZ from SBF or use House of Moto to clear the fastboot fail. If your battery is low, you need to make sure it's charged before fastbooting.
Link to House of Moto:
http://www.droidrzr.com/index.php/topic/28162-house-of-moto-20/
Link to FXZ's for restore, use the last one on the list:
http://sbf.droid-developers.org/phone.php?device=8
RikRong said:
Poppers, you're on point. However, there's no Razr M utility for the latest update. You can use House of Moto from DroidRzr or flash the latest OTA with RSD.
Daniel, since you updated to .1, you can't downgrade. Just grab the last FXZ from SBF or use House of Moto to clear the fastboot fail. If your battery is low, you need to make sure it's charged before fastbooting.
Link to House of Moto:
http://www.droidrzr.com/index.php/topic/28162-house-of-moto-20/
Link to FXZ's for restore, use the last one on the list:
http://sbf.droid-developers.org/phone.php?device=8
Click to expand...
Click to collapse
Thanks RikRong! I managed to use house of moto to reset the system to the latest VRZ_XT907_9.8.1Q-94-1. Now the phone works. But I still cannot use t-mobile sim card. And the original method described in http://forum.xda-developers.com/showthread.php?t=2166542&highlight=98+18+94 does not work on the latest ROM.
Any idea if there is a way that I can use t-mobile on it? Or my best bet is to sell it on craigslist?
Thanks,
Dehao
danielcdh said:
Thanks RikRong! I managed to use house of moto to reset the system to the latest VRZ_XT907_9.8.1Q-94-1. Now the phone works. But I still cannot use t-mobile sim card. And the original method described in http://forum.xda-developers.com/showthread.php?t=2166542&highlight=98+18+94 does not work on the latest ROM.
Any idea if there is a way that I can use t-mobile on it? Or my best bet is to sell it on craigslist?
Thanks,
Dehao
Click to expand...
Click to collapse
That method should work, though I don't know much about it. You might want to post in the thread. You should be able to get the phone to work on T-Mobile.
I'm on 98.30.1 and on T-Mobile. I used that tutorial also.
SeNT FRoM My MoToRoLA RaZR M XT907 oN T-MoBiLe
Hi, i am somewhat new to this, i have a ALE-L23 (i think it is a single SIM cause in my box comes only one imei) which used to have android 5 (emui 3) so i downloaded & installed the C432B565 update so i could update my phone to android 6, everything went fine (did it trough the official huawei app) and generally speaking my phone works normally but now i see in the build number hi6210sft and in the build model BalongC52B311
As i said, everything works fine, the only issue i have at the moment is that my computer can't recognize my phone when i connect it via USB (The battery does charge itself tough, and when i connect my S4 the computer does recognize it, so i know the cable is not the problem here)
Do you think it is somehow related? Should i worry about the build number and model? Is there any way to fix it? preferably without unlocking my bootloader as my warranty is still valid.
Any help will be highly appreciated, thanks in advance!
Dariane said:
Hi, i am somewhat new to this, i have a ALE-L23 (i think it is a single SIM cause in my box comes only one imei) which used to have android 5 (emui 3) so i downloaded & installed the C432B565 update so i could update my phone to android 6, everything went fine (did it trough the official huawei app) and generally speaking my phone works normally but now i see in the build number hi6210sft and in the build model BalongC52B311
As i said, everything works fine, the only issue i have at the moment is that my computer can't recognize my phone when i connect it via USB (The battery does charge itself tough, and when i connect my S4 the computer does recognize it, so i know the cable is not the problem here)
Do you think it is somehow related? Should i worry about the build number and model? Is there any way to fix it? preferably without unlocking my bootloader as my warranty is still valid.
Any help will be highly appreciated, thanks in advance!
Click to expand...
Click to collapse
Well you have the infamous Balong Bug.. Nothing to worry about.. But the computer should be able to detect your device.. I too had it, while transitioning from Lollipop to Marshmallow..
Read this to remove it.. http://forum.xda-developers.com/showthread.php?t=3400994
Sent from my ALE-L21 using XDA-Developers mobile app
---------- Post added at 18:02 ---------- Previous post was at 18:01 ----------
Dariane said:
Hi, i am somewhat new to this, i have a ALE-L23 (i think it is a single SIM cause in my box comes only one imei) which used to have android 5 (emui 3) so i downloaded & installed the C432B565 update so i could update my phone to android 6, everything went fine (did it trough the official huawei app) and generally speaking my phone works normally but now i see in the build number hi6210sft and in the build model BalongC52B311
As i said, everything works fine, the only issue i have at the moment is that my computer can't recognize my phone when i connect it via USB (The battery does charge itself tough, and when i connect my S4 the computer does recognize it, so i know the cable is not the problem here)
Do you think it is somehow related? Should i worry about the build number and model? Is there any way to fix it? preferably without unlocking my bootloader as my warranty is still valid.
Any help will be highly appreciated, thanks in advance!
Click to expand...
Click to collapse
Read chapter 5 from that link..
Sent from my ALE-L21 using XDA-Developers mobile app
Dariane said:
Hi, i am somewhat new to this, i have a ALE-L23 (i think it is a single SIM cause in my box comes only one imei) which used to have android 5 (emui 3) so i downloaded & installed the C432B565 update so i could update my phone to android 6, everything went fine (did it trough the official huawei app) and generally speaking my phone works normally but now i see in the build number hi6210sft and in the build model BalongC52B311
As i said, everything works fine, the only issue i have at the moment is that my computer can't recognize my phone when i connect it via USB (The battery does charge itself tough, and when i connect my S4 the computer does recognize it, so i know the cable is not the problem here)
Do you think it is somehow related? Should i worry about the build number and model? Is there any way to fix it? preferably without unlocking my bootloader as my warranty is still valid.
Any help will be highly appreciated, thanks in advance!
Click to expand...
Click to collapse
Could you let me know if it worked? Also... Does the computer detect your phone as an unknown device or does'nt it do anything but charge?
amageek said:
Well you have the infamous Balong Bug.. Nothing to worry about.. But the computer should be able to detect your device.. I too had it, while transitioning from Lollipop to Marshmallow..
Read this to remove it.. http://forum.xda-developers.com/showthread.php?t=3400994
Sent from my ALE-L21 using XDA-Developers mobile app
---------- Post added at 18:02 ---------- Previous post was at 18:01 ----------
Read chapter 5 from that link..
Click to expand...
Click to collapse
The enlighted path my friend :laugh:
Unknown device, tried in two computers now and the same result :/
I'm working on fixing the balong bug
Software install fail
I cant unlock my phones bootloader cause it wont get recognized by the computer ((
Lordbannakaffalatta said:
The enlighted path my friend :laugh:
Click to expand...
Click to collapse
indeed yes, the enlightened path...
Cannot evolve Magikarp to Gyarados..
Is there something else i can do about my phone?
Dariane said:
Is there something else i can do about my phone?
Click to expand...
Click to collapse
i guess no, that is the only option
Well, thank you anyways
I think ill take it to a technician :/
In the end i took it to a technician and he told me that my charging bay was all wrong, he changed it and now my computer recognizes my phone !
Thank you so much guys!
Lordbannakaffalatta said:
Could you let me know if it worked? Also... Does the computer detect your phone as an unknown device or does'nt it do anything but charge?
Click to expand...
Click to collapse
So i could get rid of the balong bug, covert my L23 to L21 and convert it from single to dual SIM, but, when i upgrade it to b560 i get again build number hi6210sft, any advice ?
Dariane said:
So i could get rid of the balong bug, covert my L23 to L21 and convert it from single to dual SIM, but, when i upgrade it to b560 i get again build number hi6210sft, any advice ?
Click to expand...
Click to collapse
you need to flash the location zip sokoban has a thread about it
amageek said:
indeed yes, the enlightened path...
Cannot evolve Magikarp to Gyarados..
Click to expand...
Click to collapse
keep catching them you need like 400 candy's :silly:
Dariane said:
In the end i took it to a technician and he told me that my charging bay was all wrong, he changed it and now my computer recognizes my phone !
Thank you so much guys!
Click to expand...
Click to collapse
that's why i was interested. got the same problem with mine... was it covered in waranty?
Lordbannakaffalatta said:
you need to flash the location zip sokoban has a thread about it
Click to expand...
Click to collapse
Could you please post the link? :3
Lordbannakaffalatta said:
that's why i was interested. got the same problem with mine... was it covered in waranty?
Click to expand...
Click to collapse
Dunno, i didn't took it to a huawei official center cause i knew it would take a lot of time since i bought the phone to a friend, so i took it to some guys i know and they changed the bay in around an hour
Lordbannakaffalatta said:
keep catching them you need like 400 candy's :silly:
Click to expand...
Click to collapse
almost one-fourth... geo-limitations sucks
Lordbannakaffalatta said:
you need to flash the location zip sokoban has a thread about it?
Click to expand...
Click to collapse
Found it, do i need to flash the European one or which one?
Thanks for the patience, im trying to learn
So, i flashed the Location ZIP of Europe but the hi6210sft still remains :/
Dariane said:
So, i flashed the Location ZIP of Europe but the hi6210sft still remains :/
Click to expand...
Click to collapse
Ok so you're on c432 now, isn't it?
Download b132 version and flash it, after flashing that.. There must be a folder named vendor which contains update.app (small in size), flash that too.. This will remove the bug..
If successful, you may proceed to download and flash b170, b550 and all the way to b574..
Dariane said:
So, i flashed the Location ZIP of Europe but the hi6210sft still remains :/
Click to expand...
Click to collapse
Sent from my ALE-L21 using XDA-Developers mobile app
The problem arise when i change from to B170 to b560 :/ before that it says ale-l21
Dariane said:
The problem arise when i change from to B170 to b560 :/ before that it says ale-l21
Click to expand...
Click to collapse
From b170, try flashing b550 first.. I did that it worked for me... Must work for you too..
Sent from my ALE-L21 using XDA-Developers mobile app
amageek said:
From b170, try flashing b550 first.. I did that it worked for me... Must work for you too..
Sent from my ALE-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
Just did that and no, it doesn't work