Related
Hi there,
I really need help!
I wanted to flash my phone with a nbh file, but I could not enter my bootloader.
I had installed HSPL3.
Now someone told me to use Flashaholic ROM update utility.
I did this, and a black screen with a % indicator appeared, not too long, it restarted, and went into a white screen with htc in the middle.
Restarting with volume down button pushed doesnt bring me into bootloader.
What can I do now?
I really need help!
Unfortunately, if you can't get your HD2 to boot into the bootloader, there's not much to be done.
Are you sure you had HSPL installed? Because from what I have heard, HSPL is there to always allow you to use it for flashing stuff, regardless of the integrity of other software parts such as the radio or the ROM, so reaching the bootloader should not be a problem for anyone.
Can you connect it to your PC via USB? If you manage to get a connection, you might just have a chance to flash another radio/ROM.
anrabi4 said:
Unfortunately, if you can't get your HD2 to boot into the bootloader, there's not much to be done.
Are you sure you had HSPL installed? Because from what I have heard, HSPL is there to always allow you to use it for flashing stuff, regardless of the integrity of other software parts such as the radio or the ROM, so reaching the bootloader should not be a problem for anyone.
Can you connect it to your PC via USB? If you manage to get a connection, you might just have a chance to flash another radio/ROM.
Click to expand...
Click to collapse
I installed HSPL3, and it said it was succesfull so...
After that I installed a custom rom with an utility that came with it (Dutty's)
So far I know, I cannot get any connection, but I try to download a stock rom (an utility exe) from HTC.com.
But I think this won't work right? because you have to sync.
You could try and flash a stock ROM via the SD Card, see if that works. There are some instructions here on XDA in the ROM Development section, check it out there.
Basically, once you have downloaded an official ROM from htc.com, extract it as if it were an archive and get the ruu_signed.nbh. Rename it to LEOIMG.nbh. Then take your SD Card, format it to FAT32, place the LEOIMG.nbh on the card and put it in your phone. While holding down the volume down button, boot the phone and a white Loading... screen should appear and the flashing process should begin.
I`m afraid this won't work either, as the bootloader is supposed to show up in order for you to be able to flash anything, but it's better than doing nothing, so...
anrabi4 said:
You could try and flash a stock ROM via the SD Card, see if that works. There are some instructions here on XDA in the ROM Development section, check it out there.
Basically, once you have downloaded an official ROM from htc.com, extract it as if it were an archive and get the ruu_signed.nbh. Rename it to LEOIMG.nbh. Then take your SD Card, format it to FAT32, place the LEOIMG.nbh on the card and put it in your phone. While holding down the volume down button, boot the phone and a white Loading... screen should appear and the flashing process should begin.
I`m afraid this won't work either, as the bootloader is supposed to show up in order for you to be able to flash anything, but it's better than doing nothing, so...
Click to expand...
Click to collapse
Does not work, still hangs in htc bootscreen.
What I have to do now? =(
I hope you have any more suggestions for me.
I will read it within 20 min, because I have to go soon for 20 min.
I really need my phone fixed =(
Hi, if I remember correctly, you already said in the Artemis-thread, that the VOL DOWN button is broken. If this is the case, I fear there is not much you can do...
Have the same problem too.
I've installed a few roms with no worries, tried one about an hour ago that performs a Task 29 and i'm also now stuck at the white HTC screen...
it says the task29 was succesfull and then got stuck on the white HTC screen and the rom failed to load as the laptop did not detect a usb connection...
I've downloaded a stock rom and put it on the SD card named LEOIMG.nbh and tried pressing the vol down button, the Red,green,blue,white screen appears i can see
PB81100 HX-BC
SPL 2.08.Hspl 8g XE
0x05
CotullaHSPL 0x30
Then "serial" at the bottom or if i have the phone connected to the pc then "USB" appears.
If i hold both buttons and perform a Hard reset the phone asks to press Vol up button then says restored really quickly then freezes at the white HTC screen..
Any suggestions
Cheers
Actually got it sorted now, the rom had the Flashaholic utility built in which i haven't used before.
As we speak the rom is now installing phew (stop sweating now)...
Thought i had bricked it...
MaxKaul said:
Hi, if I remember correctly, you already said in the Artemis-thread, that the VOL DOWN button is broken. If this is the case, I fear there is not much you can do...
Click to expand...
Click to collapse
It's not broken, it just worked before I did the task29.
The phone is empty, and has no bootloader, and no ROM.
wakers said:
Have the same problem too.
I've installed a few roms with no worries, tried one about an hour ago that performs a Task 29 and i'm also now stuck at the white HTC screen...
it says the task29 was succesfull and then got stuck on the white HTC screen and the rom failed to load as the laptop did not detect a usb connection...
I've downloaded a stock rom and put it on the SD card named LEOIMG.nbh and tried pressing the vol down button, the Red,green,blue,white screen appears i can see
PB81100 HX-BC
SPL 2.08.Hspl 8g XE
0x05
CotullaHSPL 0x30
Then "serial" at the bottom or if i have the phone connected to the pc then "USB" appears.
If i hold both buttons and perform a Hard reset the phone asks to press Vol up button then says restored really quickly then freezes at the white HTC screen..
Any suggestions
Cheers
Click to expand...
Click to collapse
task29 DELETES the ROM. You NEED to install a ROM. A Radio-ROM should be installed automatically with task29. If this isn't the case, you need to install a Radio-ROM too. You can either install the HTC ROM or you can install a custom ROM like forum.xda-developers.com/showthread.php?t=612580
Suggestion: Enter bootloader -> connect USB -> install ROM with CustomRUU
MaxKaul said:
task29 DELETES the ROM. You NEED to install a ROM. A Radio-ROM should be installed automatically with task29. If this isn't the case, you need to install a Radio-ROM too. You can either install the HTC ROM or you can install a custom ROM like forum.xda-developers.com/showthread.php?t=612580
Suggestion: Enter bootloader -> connect USB -> install ROM with CustomRUU
Click to expand...
Click to collapse
Do I have to repeat it again? there is NO BOOTLOADER
joshoon said:
Do I have to repeat it again? there is NO BOOTLOADER
Click to expand...
Click to collapse
If you'd read the entire post, you'd notice, that I quoted the user "wakers", who seems to be able to enter bootloader.
MaxKaul said:
If you'd read the entire post, you'd notice, that I quoted the user "wakers", who seems to be able to enter bootloader.
Click to expand...
Click to collapse
Well im not able to.
I did a HSPL before then I putted a custom ROM Dutty's on the device.
After that I putten a Stock ROM on it again, and then I used Flashaholic, and after task29 it got stuck.
Well no bootloader means no HSPL which is good news for your warranty coverage..
Just go to HTC service and play dumb " uhm i was playing around websites with a flash game and uhm my phone uhm rebooted and is like stuck ever since in uhm HTC logo"
Now if the case for not being able to load the bootloader is a broken volumedown button, yeah ur pretty screwed, prepare to dive in ur wallet.
Were do you live? If you need help and there's one living nereby maybe we can help (p.e. a full battery) I live in the eastern part of the Netherlands (Overijssel) PM me if you can come.
On the Kaiser (my previous phone) I also had a problem I couldn't enter the bootloader anymore, but I can't remember why or what I did to recover it.
- If it was an allmost empty battery and recharged it?
- If I have used a special tool to connect?
I really can't remember.
If I read your story, I think you have loaded a corrupted NBH thru SDCard method, otherwise i think you cannot wipe your bootloader. Task29 only wipes the ROM area not the bootloader.
Have you tried to contact Bepe or Cotulla, cause i think they know everything about (H)SPL.
Otherwise you can start building a new house (you've got your first brick )
have you checked you battery connections, the middle one is notorious for getting bent out of shape at which point the battery will not charge and you can't flash you ROM.
chris2busy said:
Well no bootloader means no HSPL which is good news for your warranty coverage..
Just go to HTC service and play dumb " uhm i was playing around websites with a flash game and uhm my phone uhm rebooted and is like stuck ever since in uhm HTC logo"
Now if the case for not being able to load the bootloader is a broken volumedown button, yeah ur pretty screwed, prepare to dive in ur wallet.
Click to expand...
Click to collapse
I'm 100% sure it's not the volumebutton, and yes Im gonna play a bit dumb ofc, but I already have another story.
henk-jan said:
Were do you live? If you need help and there's one living nereby maybe we can help (p.e. a full battery) I live in the eastern part of the Netherlands (Overijssel) PM me if you can come.
Click to expand...
Click to collapse
It's costs a lot for a trip to there.
Btw, I tried a full battery too, didn't work. (I have two)
webpatrick said:
On the Kaiser (my previous phone) I also had a problem I couldn't enter the bootloader anymore, but I can't remember why or what I did to recover it.
- If it was an allmost empty battery and recharged it?
- If I have used a special tool to connect?
I really can't remember.
If I read your story, I think you have loaded a corrupted NBH thru SDCard method, otherwise i think you cannot wipe your bootloader. Task29 only wipes the ROM area not the bootloader.
Have you tried to contact Bepe or Cotulla, cause i think they know everything about (H)SPL.
Otherwise you can start building a new house (you've got your first brick )
Click to expand...
Click to collapse
I think it's bricked man, my bro is looking for the papers soon, and then im going to the KPN shop (the provider), because the phone has been ordered from there.
nrfitchett4 said:
have you checked you battery connections, the middle one is notorious for getting bent out of shape at which point the battery will not charge and you can't flash you ROM.
Click to expand...
Click to collapse
All the connections look fine.
I bought T mobile HTC HD2 it was displaying Stick together whenever switched on. Just once it booted normal after a long time but then again it was just displaying Stick together.
I decided to upgared the ROM. It has SPL-2.08.0000
I downloaded the latest ROM from T Mobile 2.13.531.1 and went into boot loader connected USB it dispayed USB (i.e changed from Serial). I started after it was done 8 pct it stopped.
I also tried putting NBH directly into the sd card with leoimg.nbh but it is just displaying "upgrade rom error code"
Please help as what should I do next.
Many thanks
Please help
Any body please help. I am really frustrated now.
shahzadaziz said:
I bought T mobile HTC HD2 it was displaying Stick together whenever switched on. Just once it booted normal after a long time but then again it was just displaying Stick together.
I decided to upgared the ROM. It has SPL-2.08.0000
I downloaded the latest ROM from T Mobile 2.13.531.1 and went into boot loader connected USB it dispayed USB (i.e changed from Serial). I started after it was done 8 pct it stopped.
I also tried putting NBH directly into the sd card with leoimg.nbh but it is just displaying "upgrade rom error code"
Please help as what should I do next.
Many thanks
Click to expand...
Click to collapse
Flash Task29. Then download 3.14 from http://www.t-mobile.com/wmupgrade/ Flash it via USB and see if that does the trick.
Thanks I tried not only thi smany other roms what happens is it starts to flash and then stops at 9 pct with communication lost, then start displaying upgrade rom code error at Boot (down vol key plus power).
I do task 29 then this rom code error thig goes away but I am not able to flash at all.
Help please.
almost did everything
well i have been trying continuously since 8 hours but nothing seems to work. I have HSPL3 and when ever I try to flash any rom (have downloaded tons of roms - lol)
it some time just stucks in begining, some times it stsrts and losses communication with the phone from boot loaded. I even tried butting the RUU_signed.nbh to sd card by naming in LEOimage stuff as it is said in the posts and then did vol down pluspower but it seems like it is not even reading from the sd card.
I am not sure what else can I try. I am able to do task 29 from boot loader. I see tri color screen soI am getting into boot loader but I do not know what the h... is wrong with this device.
If some expert can give me directions from here I will highly appreciate. Thanks
shahzadaziz said:
well i have been trying continuously since 8 hours but nothing seems to work. I have HSPL3 and when ever I try to flash any rom (have downloaded tons of roms - lol)
it some time just stucks in begining, some times it stsrts and losses communication with the phone from boot loaded. I even tried butting the RUU_signed.nbh to sd card by naming in LEOimage stuff as it is said in the posts and then did vol down pluspower but it seems like it is not even reading from the sd card.
I am not sure what else can I try. I am able to do task 29 from boot loader. I see tri color screen soI am getting into boot loader but I do not know what the h... is wrong with this device.
If some expert can give me directions from here I will highly appreciate. Thanks
Click to expand...
Click to collapse
You try flashing it without the microSD card in there just for kicks?
Lready tried. With Micro SD without MicroSD with SIM without SIM. One strange thing is when the RUU is gathering data from Device before starting the flash and where it tells you the old rom and the new rom ver. I do not see any old rom version. Could it be something serious.?
come on experts I have tried what ever i could getting the info from the net. Should I give up on this HTC HD2 and consider by purchase a loss.
The RUU not showing anything for the old ROM version doesn't mean anything. And I would call up HTC and see what they say about warranty status at this point.
Need Nand Flash Dump for HTC HD2 TMOUS
After a lot of time I have contacted a repair shop (after bricking my phone of course). He jtagged and he is also not able to flash into the phone. He advised if we can get hold of a TMOUS (the one which I have and is faulty, 16GB card) nand flash dump then he can try to flash the nand via that dump.
So any one who can give me the nand flash dumpfor tmous htc hd2 16gb mem card.
my email is [email protected]
I will be grateful, as I am not in US so warranty is kinda difficult. Some one sold me this phone over ebay.
Okay do what now? You need a NAND dump of a TMO US HD2? As, a stock 2.13 ROM HD2? What's this about the memory card about?
i have same problem. can not flash.
but will try task29 first.
plz help.
sevmasentyfo said:
i have same problem. can not flash.
but will try task29 first.
plz help.
Click to expand...
Click to collapse
I had this same problem and it is a very easy fix. I rolled back to and original rom. Download the Rom to your Then right click the rom and extract the RUU file.
copy it to your SD card. I couldn't get my 16gb card that came with my HD2 to work doing this so i used my wife's 2gb-4 card. Format the card to fat 32. Rename the extracted RUU file to LEOIMG.nbh my you can download winzip for free to extract the file. The problem is that the phone is set up for fast connection. However you cant change that if the phone wont boot.
let me clean this up a little
1) Download and install winzip
2) Download T-mobile HTC latest update
3) right click update and select extract RUU file
4) rename file to LEOIMG.nbh
5) Format SD card to Fat 32
6) Copy LEOIMG.nbh to SD (I couldnt get my 16gb card to do this)
7) Install in phone and boot
You may notice that i only have a few posts. thats because i an a Noob.
If you search the HD2 ROM development forum for Flashing your First GSM Noobs guide it has almost all the answer and if it doesn't the answers are linked in there somewhere.
Again Im just a noob so if you follow my directions and trash your phone sorry.
Im just trying to help.
chong112193 said:
I had this same problem and it is a very easy fix. I rolled back to and original rom. Download the Rom to your Then right click the rom and extract the RUU file.
copy it to your SD card. I couldn't get my 16gb card that came with my HD2 to work doing this so i used my wife's 2gb-4 card. Format the card to fat 32. Rename the extracted RUU file to LEOIMG.nbh my you can download winzip for free to extract the file. The problem is that the phone is set up for fast connection. However you cant change that if the phone wont boot.
let me clean this up a little
1) Download and install winzip
2) Download T-mobile HTC latest update
3) right click update and select extract RUU file
4) rename file to LEOIMG.nbh
5) Format SD card to Fat 32
6) Copy LEOIMG.nbh to SD (I couldnt get my 16gb card to do this)
7) Install in phone and boot
You may notice that i only have a few posts. thats because i an a Noob.
If you search the HD2 ROM development forum for Flashing your First GSM Noobs guide it has almost all the answer and if it doesn't the answers are linked in there somewhere.
Again Im just a noob so if you follow my directions and trash your phone sorry.
Im just trying to help.
Click to expand...
Click to collapse
can u share which rom u used to update ur hd2
cdma-india said:
can u share which rom u used to update ur hd2
Click to expand...
Click to collapse
I used the latest one put out by T-mobile
T-Mobile_HD2_MR_Software_3.14.531.1
i followed the instruction, put the LeoImg file into 1gb microsd. Booted the phone into bootloader mode but it doesn't do anything. It just stay at "Upgrade roM code error please try again"
PB81120 SS-B3
SL-3.03.0000 XE
abcchoier said:
i followed the instruction, put the LeoImg file into 1gb microsd. Booted the phone into bootloader mode but it doesn't do anything. It just stay at "Upgrade roM code error please try again"
PB81120 SS-B3
SL-3.03.0000 XE
Click to expand...
Click to collapse
Thats exactly what i have to,,,I'm very stuck now,anyone got any ideas on how to fix this?
Thanks
Hello, i have serious problem,
I was running Android GINGER... and after one restart i god 1234.... FAILED bla bla
After that i went to MAGLDR and tryed to reflash another rom but no succes
MAGLDR froze!!!!
I did TASK 29 on it and it removed everything, after this i am UNABLE to install MAGLDR 133 or any other on my HD2. its a 576MB from UK, using it in CROATIA.
HAD T-mob WIN 6.5, Android 2.1, and above mentioned 2.3.3 ver.
ANY IDEA HOW TO INSTALL MAGLDR AGAIN???
HSPL is COTULLA 2.08 HSPL
Did i bricked it? can i undo?
p.s. i did hardreset, didnt work.
CAN I TRY RETURN SPL and how to return to stock so i can try WMO6.5 again?
HELP i am desperate! help, payed alot for this phone, i am broke now without phone!
calm down man we've all been there at some point,
ok if you wanna go back to stock go to the htc site and download a official rom,
does your phone turn on?
can you get in bootloader?
if you can does it say spl or hspl ??
ops
i am sure you havent been there.
I GOT HSPL 2.08 by beppe and Cotula
I,ve tryed official rom, it starts counting, but at approx 10% it stops and bar goes red, and triangle with exclamation point appears next to it.
I OFF:... F**** it UP. i am so screwd!
-phone does turn on, and goes to white screen, saying htc and nothing
-i can go to 4colour bootscreen, sayes SERIAL and USB after i connect
ty for trying to help me
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Demon_man said:
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Click to expand...
Click to collapse
i sayed i had android on cwm, i tryed recover but magldr crashed, and since then i have problem loading MAGLDR.
RADIO FAILED TO UPDATE, i tryed that version that you sayed but it goes to 100% then shows again that triangle with !inside. F***** i am loseing my mind!
Your way of upgrading rom wont work, gray screen shows for a glich of a second and dissapears to 4colour bootscreen.
I wish i died! i ****ed all up.
BTW i bought a phone in uk and on the back of battery sayes only serial numbers in this order:
S/N99HJY005-2
35412003-754967-0
no imei, no nothing else if helps.
i am dead, payed 500$ for it last year for this amazeing phone and now i ruined everything.
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Demon_man said:
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Click to expand...
Click to collapse
I get it , how to do GRAY FLASHING THING, but i got RADIO EROOR
SAYES:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
Update Terminate
UPDATE FAIL
this happends when the bar gets to the 100%
do you have access to another pc mate with a different operating system from yours??
are you connecting phone via usb to the front or back of the pc?
have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Take out the battery and keep the phone off in a very cool air conditioned room for a couple hours (maybe even the refrigerator).
Put the battery back in and flash stock again.
edit: hmm. Just read that other thread, yeah you may need to jtag it...but I'd still try the fridge thing.
Edit2: worked for this guy:
nschoot said:
Sorry, for not replying before...
I put my phone in a ziplock plastic back and left it in the fridge for a few hours (I think about 8 hours or so). Then I booted it and tried to install the LEOIMG.nbh file from SD card... I kept it in the fridge while installing the image.
And somehow, it just worked first time!!
The image (from the first post of this thread) is a US demo version of Windows mobile, but I was able to install the regular ROM from the HTC site after this - without the need to keep it in the fridge.
Click to expand...
Click to collapse
demon_man said:
do you have access to another pc mate with a different operating system from yours??
Are you connecting phone via usb to the front or back of the pc?
Have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Click to expand...
Click to collapse
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
davor.klobucaric said:
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
Click to expand...
Click to collapse
Which stock ROM did you flash?
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Demon_man said:
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Click to expand...
Click to collapse
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
davor.klobucaric said:
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
Click to expand...
Click to collapse
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
your phone turned off??? is your battery dead??
orangekid said:
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
Click to expand...
Click to collapse
I have tryed that, thank you for your response, it went well, spl went to rom fitting, BUT,
WHITE HTC sigh on turn on, 3 RED LINES ON THE BOTTOM showing radio, and other stuff, but it constantly restarts, it wont load win 6.5. anyonne know why?
Problem with clk/magldr
was trying to flash my htc hd2 EUROP with hd2 toolkit v 4.2.0.1 i follow this steps
1-i power off my phone
2-I press in vol down button and power button in same time phone now was in 3 color mode
3- i press in task 29 on hd2 toolkit this erase my phone completely
4-then i press vol down button and power button in same time again
5- i click in clk repartition and choose 200MB
6- what happen is after all this steps my phone start with htc image blocked in white and green and i cannot boot in fast speed mode like usually.
obs, im using spl-2.0.8 HSPL by cotulla.
does anyone knows how to enter in fast speed boot mode without clk or magldr cause ive tried with these they dont work,..i just only can run wm6.5 that is .....i need help please
You are sure, you have installed a recommended radio rom?
You should use the radio rom 2.15.50.14.
Send from my Leo using Tapatalk
Hi Guys,
I am getting desperate with my HD2. I've read and tried most of your advices here on XDA, but I can't get rid of HSPL from my phone and return to stock ROM to send it for repair.
When I tried to flash my phone directly from SD card with renamed .nbh file, it would always get stuck at some point of installation and would leave me with phone that wouldn't boot, neither Android nor Windows. When I flash the phone thru USB while in boot loader mode (i tried few roms and radios, most recently radio 2.06.51.07 with HTC_WWE_1.66.405.2 rom)
It would install correctly and even boot the Win Mobile, but once restarted it wouldn't boot again and would get stuck on a blank white screen. Also the HSPL is still shown on the boot loader screen.
when I repeated the process and installed both radio and rom again, the same thing would repeat and I'm stuck on blank screen again.
My boot loader screen shows this:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
cotulla HSPL 0x40
The phone was from UK Virgin mobile, but came unbranded and I'm not sure what the stock rom was. I tried flashing it with SPL 2.08, but that wouldn't get me rid off the HSPL.
Any help will be greatly appreciated!
Thanks!
Get hspl2, and choose 1.66.0000
Retry the wwe 1.66 rom again.
Post results.
Spl 2.x is tmous spl, and doesn't like to let itself downgrade, which is what the 1.66 rom is trying to do.
thanks for the reply!
Just tried and it went without any error logs (only took couple of seconds) and claimed it was successfully installed, but when restarted, the boot loader screen still says SPL-2.08 HSPL.
any other ideas?
stuck radio then, most likely, which often prevemts spl from changing too.
no definitive answer as to what exactly causes it, , corrupted nand most likely.
when you say it sticks part way thru the flashing, , does it stick around 8-10%? if so then its definitely a stuck radio problem. do you get 'radio_rsa fail' or something similar?
sadly there isn't any way i know of to fix it. all i can suggest is you try various troms from sd. i read one thread (out of hundreds with teh same issue) where the OP finally found one stock rom that took.
dont forget that it needs to be teh correct stock rom, not just any stock rom. so an O2 uk hd2 must use o2 uk stock roms. 1.42, 1.72 or 3.14.
locate your correct stock roms and try them all.
Yea exactly thats what I get when flashing from SD card, stuck soon at around 10% and brings up the radio fail log.
When I do that and try to flash them all from SD card, shall I install radio first or it doesn't matter when flashing ROM from SD card?
Any idea how to find out what's the stock rom for my hd2? I tried HTC site but you can't download anything from there for HD2 since they updated their site.
Also, shall the SD card be formated with ext3 system partition on it (the android setup) or just use an empty FAT32 formatted card?
Vipo said:
Yea exactly thats what I get when flashing from SD card, stuck soon at around 10% and brings up the radio fail log.
When I do that and try to flash them all from SD card, shall I install radio first or it doesn't matter when flashing ROM from SD card?
Click to expand...
Click to collapse
doesnt matter when flashing stock roms, they all imclude a radio. It cant hurt to try flashing teh radio separately, but i suspect teh same outcome.
Any idea how to find out what's the stock rom for my hd2? I tried HTC site but you can't download anything from there for HD2 since they updated their site.
Click to expand...
Click to collapse
pretty sure virgin phones came rom unlocked, so look at teh filenames of teh roms, , you want 'HTC-WWE' where HTC means unbranded, and wwe means world wide english.
example
o2 branded rom filename .. RUU_Leo_S_O2_UK_3.14.206.1_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
unbranded rom filename ... RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
ALso, see the green numbers? thats the same for all same roms, so all o2 roms are 206 and all unbranded wwe are 405
Also, shall the SD card be formated with ext3 system partition on it (the android setup) or just use an empty FAT32 formatted card?
Click to expand...
Click to collapse
shouldnt matter, but again it cant hurt to fully format the phone to fat32, full format, not quick format.
Thanks for your help man! Will try and post results later.
Vipo said:
When I tried to flash my phone directly from SD card with renamed .nbh file, it would always get stuck at some point of installation and would leave me with phone that wouldn't boot, neither Android nor Windows.
Click to expand...
Click to collapse
Thats because you are not booting into the right bootloader. See pt 4 below.
No need for all the hassle, there is a really easy way to do this. This will revert your phone ENTIRELY. Remember to have at least 50% battery before doing this:
1.Download official ROM and extract with winRAR or WinZip.
2.Rename the *.nbh file to LEOIMG.nbh
3.Format a SD card with FAT32 and put the LEOIMG.nbh file in the root directory
4.Insert the card to the phone and enter bootloader (While phone is Off:Hold Volume down & press power button)
5. The bootloader will recognize the .nbh file and ask if you want to flash it. Follow instructions
6.Wait a few minutes and you are back to WM6.5
Tried, doesnt work. Explained in the first post.
why are you sending it for repair in the first place?
I dropped it once and since then has the screen got some weird yellowish/greenish colours. seems like some contacts got fu**ed up, but there isnt any mechanical damage visible, so they should repair under the warranty.
But only if in bootloader the spl says 1.42.0000 1.66.0000 or 3.03.0000
Anything else will be rejected.
What you mean by 'not the right boot loader'. I did get it to start installation and recognise the file, but after a while it would come up with a error log saying something like radio failed or something like that...
Yea I know, thats why Im trying to put it back to stock.
what size sd card are you flashing the .nbh file from? you will need to use a 4gb or smaller sd card.
what he meant by the right bootloader i think was to be flashing the .nbh from the tri-color bootloader, not from MAGLDR or CWM Recovery.
If you are using a 4gb or smaller card and it's still failing at the radio, then you might as well try flashing a few different radio's by themselves and maybe you'll get one of them to take, then possibly be able to get out of HSPL
well yea, thats what will be trying to do next.
it wont let me to MAGLDR or CWM, seems like these files got corrupted too so yea, im using the tri-color bootloader.
and its 2GB sd card im using
so i guess the only way now is to try flash different roms...
dude 2-3 days back even i was facing the same problem, and here i am writing , how i get through this. i guess you already tried this, but still i am writing so that you get some help...
1)i use hspl2 and select 1.42.0000 to remove my hspl 2.08.
2)extract stock rom using "7-zip" and in the extracted folder find "RUU_signed.nbh" rename it to "LEOIMG.nbh". copy that file to your formated fat32 micro sd card.
3) reset the your hd2 while holding vol down and end call button.
4) first a tri-color screen will appear, keep pressing both the buttons, then a gray screen will come with written "loading".
5) after that 1 more gray screen will appear, loose the vol down button now, rest everything will go smooth, u dont have to do anything.
meet.rajiv15 said:
dude 2-3 days back even i was facing the same problem, and here i am writing , how i get through this. i guess you already tried this, but still i am writing so that you get some help...
1)i use hspl2 and select 1.42.0000 to remove my hspl 2.08.
2)extract stock rom using "7-zip" and in the extracted folder find "RUU_signed.nbh" rename it to "LEOIMG.nbh". copy that file to your formated fat32 micro sd card.
3) reset the your hd2 while holding vol down and end call button.
4) first a tri-color screen will appear, keep pressing both the buttons, then a gray screen will come with written "loading".
5) after that 1 more gray screen will appear, loose the vol down button now, rest everything will go smooth, u dont have to do anything.
Click to expand...
Click to collapse
but if you return to hspl 1.42.000 the you cant flash your rom ..you need hspl 2.08 only to flash
Thanks zaaaan but I got bit luckier and virgin replaced the phone for no extra charge. I was 2 weeks before the end of the contract and I gave it a shot, sent it to virgin. They got back to me saying that they cant repair it and will therefore send me a replacement phone. I got new desire, bit smaller, but android on it runs really nicely and most of all its built for it, so no more flashing and killed hours of running in circles.
then I got 20£ discount just to stay with them on no contract. they got me
should probably add that the phone still had hspl on it
i have spent countless hours on this and still have no idea how to fix it..ive searched many threads but none have helped..
i have a htc hd2 and had it on android NAND and just yesterday booting the windows 7 phone onto it.. after it finished the phone rebooted and was stuck on the maglrd screen where it had usb flasher and tetris and all that.. soon i then realized that the maglrd had to be on version 1.3 in order to put windows 7 on it and i had version 1.1 from when i put android on it.. so it was stuck on that screen.. so then i read from a forum that to unistall maglrd and android NAND download a stock ROM for your device then run the setup while your phone is on the tri-colored bootloader screen.. so i downloaded RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50 .07U_2.08.50.08_2_Ship.exe and ran it while on the boot screen after it finished my phone rebooted but then it booted straight to the bootloader screen.. then i downloaded RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship.exe and tried the same thing but no luck.. im still stuck.. on the screen it says
PB81120 ss-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
maybe that helps.. i dont know what my radio thing is
i admit im a noob i just need HELP
You just got REAL lucky,,, PB81120 is a tmous, right? Red end key green send? Says t mobile below the earpiece?
If yes, then that second rom you flashed is the only non tmous rom that wont DESTROY the phone.
Do NOT flash any more stock roms that don't say TMOUS in the filename.
My suggestion, get tmous 3.14 rom and flash from SD card. Assuming that goes well, then flash hspl magldr etc.
Yeah it's a tmobile phone.. But how can I flash from the sd card when it doesn't even show up on my computer.. I can't select the USB drive mode on my phone for it to pull up on the comp unless there's another program I can use to explore my phone
ah right, no card reader?
well, id get the three shipped tmous roms (2.10 2.13 and 3.14, , you already have the 2.10) and try flashing them again, see if you can get any of them to boot. If you can't id suspect the stuck radio/spl problem, meaning something isn't flashing correctly (usually the radio), but the best way to see this is by sd card flashing, so if you have any access at all to an sd card reader (another phone, perhaps?) then sd card flashing will show you on screen each section as it flashes.
Don't be confused by hspl not being removed after a flash, it won't be. We'll come to that later.
Don't forget you need a 4gb or smaller sd card for flashing.
DO NOT use ANY non tmous stock roms, you will end up with a brick.
EDIT - actually, a good test for the stuck radio/spl problem is to try running hspl3 (or hspl4) and changing the spl to anything other than it currently is (2.08.hspl). If it seems to go OK, but nothing changes in the bootscreen, then that's the problem, but be aware that you could potentially end up with no HSPL installed and no way to re apply it, so if you can get your cands on an sd card reader, go for that first.
thanks i already tried the tmous rom i already had with the 16gb sd card and also an 8gb.. i guess i need to buy another one.. i have a 3.14 rom but its not a tmous one.. where do i go to dowload them?
so first i need to get a 2gb sd card and try flashing with a tmous 2.10, 2.13, or 3.14 ROM before testing the stuck radio/spl problem correct?
maybe im just doing the flashing wrong.. first i extract the file using 7-zip .. then i rename the .nbh file to leoimg.nbh then i copy it to the sd card then unplug and turn on and let it run and press the reset button on the back when its finished.. and it says on the tri-colored screen that my the spl is 2.10.0000 now and underneath it now says MicroP(LED) and MicroP(TOUCH)
You need to use a 4Gb or smaller sd card to flash a rom using the sd card bootloader flashing method. Get your hands on one of those and you'll have no problem flashing a stock TMOUS rom.
Sent from my HTC HD2 using XDA App
qweasdzxcasd said:
maybe im just doing the flashing wrong.. first i extract the file using 7-zip .. then i rename the .nbh file to leoimg.nbh then i copy it to the sd card then unplug and turn on and let it run and press the reset button on the back when its finished.. and it says on the tri-colored screen that my the spl is 2.10.0000 now and underneath it now says MicroP(LED) and MicroP(TOUCH)
Click to expand...
Click to collapse
ok well that all looks ok, and your spl has changed from 2.08.hspl to 2.10.0000 .
Did you take note of the blue writing on the phone screen when you sd card flashed? looking out for ''rsa_radio fail'' or some such)
It says radio v2 ok. rcust ok. Boot loader ok. Splash ok. os ok. Configdata ok. Ruu wallpaper1 ok. Ruu wallpaper2 ok update complete update success .... And it still didn't work with a 2gb micro sd card and a tmous 3.14 rom
and how would I even change my hspl to 3 or 4 if my phone doesn't even show up on the computer.. It wouldn't connect to active sync
what if i plug in my phone and instead of flashing with the sd card just click on RomUtilityUpdate and let it run?
yep do that. You can flash from teh bootloader screen, doesnt have to connect to activesync, so long as it says USB in teh white bit of teh bootloader screen.
it's still not working.. I've tried 2.13 and 2.14 ... I'm about to try 2.10 .. But I doubt it'll work
Nope still nothing..
looks like a warranty issue then (assuming its still under warranty?) at least the spl is now warranty safe.
So what does that mean.. do i take it into the store then an they fix it?
won't they just tell me to go since i tampered with the system?
so long as the spl says 2.xx.0000 (the 0000 is the important bit) and you cant see anything like magldr, , , are there any obvious signs? it doesnt boot does it? (im on my pohone one handed, im not checking back thru the thread )
Right now it's 2.10.0000 an it still doesn't boot
Then there's no way anyone can tell you've been flashing. Anything a tech does to make it work will wipe any evidence.(unless they forensically examined it, which they don't)
Gotta be out of warranty by now tho? And if its a paid repair it doesn't matter if you've been flashing.
Oh i see.. and yes it's out of warranty.. i guess i'll just take it to the store then
They basically said the phone is no more.. but i was just talking it employees at the place so maybe i need to talk to a tech person or something..
bootloader problm
is there any software which can put my hd2 tmus into bootloader...as i cant get into boolder by holding vol down key....wat can ido....