Related
Hey guys, I'm currently trying to flash back to the new 4.3 factory image that I downloaded from Google, however, it all goes fine, I flashed the bootloader, flashed the radio and it all says it has been updated properly, then when I try and flash the system.img files and boot.img files they just say no such file or directory exists and stops, meaning the phone is unusable at the moment until I flash something.
Anyone know why this is happening?
BTW I'm using a mac.
Issue fixed, see below!
************************************************************************************************
Ok guys, the problem was solved in an odd way!
I got annoyed with the flashing errors, and flashed the old kernel and radio I was using with my Illusion rom which thankfully got me back to that even though I had lost all of my data (backed up though).
For anyone having this problem and wants to unroot to go back to 4.3 or is trying to flash the legit 4.3 rom from Google and then maybe unroot or just use the 4.3 rom direct from Google...
DOWNLOAD THE LEAKED 4.3 ROM AND FLASH USING STANDARD CWM METHOD.
DOWNLOAD THE .84/.83 KERNEL AND FLASH THIS AS WELL.
After this I got the legitimate OTA update which was only 3.4mb and it even fixed root so I am now back to complete stock, locked bootloader and no root!
Hope this helps
Click to expand...
Click to collapse
Easiest way of flashing the system image is to just use the flash-all script included in the TGZ - just extract it out and run it when the phone is connected in fastboot mode. Personally, I do the following:
1. Extract the entire TGZ (including the update.zip)
2. Move all the IMG files into one folder
3. Rename them to easy names, e.g. bootloader, radio, system, userdata, boot, recovery, etc.
4. Flash them all in turn, rebooting the bootloader each time
5. Once all done, erase/format the cache (fastboot erase cache and fastboot format cache)
6. Boot into recovery and clear cache again and then do a factory reset (this makes sure the unit see all the internal memory)
7. Reboot the phone
Should all work now
siravarice said:
Hey guys, I'm currently trying to flash back to the new 4.3 factory image that I downloaded from Google, however, it all goes fine, I flashed the bootloader, flashed the radio and it all says it has been updated properly, then when I try and flash the system.img files and boot.img files they just say no such file or directory exists and stops, meaning the phone is unusable at the moment until I flash something.
Anyone know why this is happening?
BTW I'm using a mac.
Click to expand...
Click to collapse
Maybe you have corrupted files? Retry the download from google and unpack all with 7zip.
I did that yesterday and all works fine.
4.3 (JWR66V)
https://dl.google.com/dl/android/aosp/occam-jwr66v-factory-08d2b697.tgz
7zip
http://www.7-zip.de/
[HOW-TO] How to flash a factory image / return to stock / unlock / root #
http://forum.xda-developers.com/showthread.php?t=2010312
EddyOS said:
Easiest way of flashing the system image is to just use the flash-all script included in the TGZ - just extract it out and run it when the phone is connected in fastboot mode
Click to expand...
Click to collapse
How would I do that on a mac? I tried typing:
./fastboot flash flash-all.bat
but do I need to use the .sh version?
info.brandenburg said:
Maybe you have corrupted files? Retry the download from google and unpack all with 7zip.
I did that yesterday and all works fine.
Click to expand...
Click to collapse
Did that, same thing happened. I tried flashing the entire .zip and then I tried separately and it still didn't work.
Ok so I know it is just the system.img file that doesn't work, as all the other files have just flashed fine! Going to re-download and see if that helps.
siravarice said:
How would I do that on a mac? I tried typing:
./fastboot flash flash-all.bat
but do I need to use the .sh version?
Click to expand...
Click to collapse
You just run the script, you don't flash it. It's a batch file which then does all the fastboot commands. You also use flash-all.sh as you don't have Windows
EddyOS said:
You just run the script, you don't flash it. It's a batch file which then does all the fastboot commands. You also use flash-all.sh as you don't have Windows
Click to expand...
Click to collapse
Still doesn't work.
I used: bash flash-al.sh
And it just said fastboot not found in certain lines for the command and did nothing. I thought it fixed itself when I swapped USB ports but when it got to the system.img it just gave me the same error again. It flashes everything else ok but not this file, it's the third time I have downloaded it and now I have no way to get it back to being useable as when I press start it just gives me a black screen
HELP PLEASE!
I would but I use Windows and it's all fine. Might be worth downloading the factory image again, checking the md5 and trying to flash the system image again
EddyOS said:
I would but I use Windows and it's all fine. Might be worth downloading the factory image again, checking the md5 and trying to flash the system image again
Click to expand...
Click to collapse
Im trying to install some Samsung Android Drivers on my old laptop but the thing is so slow it's basically impossible to work from now
I've redownloaded the files, I don't know how to check the MD5Sum though. Still nothing doing. I get this error:
checking product... OKAY
checking version-bootloader... OKAY
checking version-baseband... OKAY
sending 'boot' (6166 KB)... OKAY
writing 'boot'... OKAY
sending 'recovery' (6664 KB)... OKAY
writing 'recovery'... OKAY
sending 'system' (531281 KB)... ERROR: usb_write failed with status e00002be
FAILED (data transfer failure (No such file or directory))
edue3e4:4.2unrootnexus4 Simon$
It really doesn't want to write the system.img file, or maybe it doesn't want to write to system?
What happens if you extract the system.img file and flash it via fastboot manually?
fastboot flash system system.img
I always use this guide if I forget:
efrant said:
D. Type in the commands into the command prompt
1) Make sure your computer recognizes your device by typing: fastboot devices
2) Unlock your bootloader (if you have not already done so): fastboot oem unlock
3) You will see a prompt on your device. This will wipe your entire device (including the /sdcard folder). Accept. Note: you use the volume keys to change the option and the power button to accept. You cannot use the touch screen.
4) Reboot by typing: fastboot reboot-bootloader
5) Flash the bootloader: fastboot flash bootloader bootloader-mako-makoz10o.img (or whatever the name of the bootloader image that you downloaded).
6) Reboot: fastboot reboot-bootloader
7) Flash the radio: fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1700.48.img (or whatever the name is of the radio image that you downloaded).
8) Reboot: fastboot reboot-bootloader
9) Flash the system partition: fastboot flash system system.img
10) Flash the data partition: fastboot flash userdata userdata.img Note: this command will wipe your device (including /sdcard), EVEN if your bootloader is already unlocked. See note 2 below.
11) Flash the kernel/ramdisk: fastboot flash boot boot.img
12) Flash the recovery partition: fastboot flash recovery recovery.img
13) Erase the cache partition: either a) fastboot erase cache OR b) fastboot format cache <<== the second option seems to work better for most people. Thanks joostburg.
14) Reboot: fastboot reboot
15) Done! The first boot will likely take quite a bit longer than you are used to, as Android builds the Dalvik cache.
Now you have a fully stock image on your device. The only thing that is different from out-of-the-box condition is that your bootloader is unlocked. See the notes section at the end of this post for information on re-locking the bootloader.
Note that some users indicate that they can't get past the X on boot. If this happens to you, reboot into the bootloader and select recovery. Then, when you see the Android with the red exclamation mark, hold power and press volume up to take you to the menu. Wipe cache. If that still doesn't work, boot back into recovery and do a factory reset.
If you have a 16GB device, and it now shows up as 8GB, reboot into recovery (hold power and press volume up when you are at the screen with the android and the red exclamation mark), and wipe cache. If that still doesn't work, boot back into recovery and do a factory reset. Or do this
Click to expand...
Click to collapse
EddyOS said:
What happens if you extract the system.img file and flash it via fastboot manually?
fastboot flash system system.img
I always use this guide if I forget:
Click to expand...
Click to collapse
That's exactly what I have been doing, I prefer doing it manually as I don't like using Toolkits and finding a good one for mac is hard enough.
It just says that it cannot send it because the file or directory does not exist, yet if I unplug the phone it does go back into my old rom I was using before that, even though I flashed a new radio and recovery.img, boot.img, user data.img, everything except system.img as it doesn't work
Something clearly wrong with the partition but no idea what...
I know right, I've gone back to the ROM I had previously and downloaded the leaked 4.3 rom and flashed it through flashify. If it works I will simply lock the bootloader again and it should be good to go!
i did the same way through nexus tool kit 2.0 n p.s i guess the file was corrupted that y it failed in the mid. ill try it again
Hmmy 4444 said:
i did the same way through nexus tool kit 2.0 n p.s i guess the file was corrupted that y it failed in the mid. ill try it again
Click to expand...
Click to collapse
Let me know if you get anywhere with it!
it worked.. jst copy the image n dont rename it n go to google nexus 4 toolkit folder n there u would see a folder named *put googlr factory image here* paste it there n before starting ur bootloader must be unlocked.. so thats that.. after that that open the nexus 4 toolkit n then click on number 9 whch says download extract + flash google factore stock rom n then after that type 2 whch says flash google factory image... n thats it. it will automatically flash it.... gv me thanks too
Sent from my Nexus 4 using xda app-developers app
Hi there, same issue with me on a mac
Plus can you tell me how you went back to the previous rom, my phone is unusable right now and i do have a nandroid backup so.
Have either of your tried to flash the 4.2.2 factory image? Would be interested to see if it works
Sent from my Nexus 4 using xda premium
EddyOS said:
Have either of your tried to flash the 4.2.2 factory image? Would be interested to see if it works
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I dont mind, can you direct me towards a post where they show how to, i m not sure of all this and dont want to mess around with wrong files.
UPDATE: I tried and that works just fine. Rebooted to 4.2.1
Hi, I am a happy owner of the HP Slate 7 Extreme which is basically the same device as you guys are using.I am still on the 4.2 Jelly bean since HP are not pushing over the air updates with our devices.I want to use the script from the development forum "[Script] [Utility] Nvidia Tegra Note 7 Kitkat Unlock BL, Restore, Recovery, & Root", I want to know if anyone has tried to use it with the Slate Extreme or if it simply should work on the Jelly Bean aswell. Thanks guys.
still have freeze/hang issue..
http://forum.xda-developers.com/showthread.php?t=2663449&page=2
mofared said:
still have freeze/hang issue..
http://forum.xda-developers.com/showthread.php?t=2663449&page=2
Click to expand...
Click to collapse
What about the 4.3+ ?
crazyhacker202 said:
What about the 4.3+ ?
Click to expand...
Click to collapse
i have not test that yet but i believe it should work because i have tested the 4.4.2 and 4.2.2 evga ROM from here using the cwm install from sdcard method..
http://forum.xda-developers.com/showthread.php?t=2627671
The only thing that puzzles me now is i am unable to perform a system recovery from HP update.zip using cwm.
http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=6608632#N147
So right now i am stuck with 4.2.2 evga ROM all is good and functional.
I have read some post that by updating OTA fix issue in 4.4 but i have no idea on how to get the OTA update.
p/s: This is my first tablet and root attempt...
edit:
i found out that rootjunky has already released the 4.4.2 with 2.3 OTA i will give it a try and feedback later
mofared said:
i have not test that yet but i believe it should work because i have tested the 4.4.2 and 4.2.2 evga ROM from here using the cwm install from sdcard method..
http://forum.xda-developers.com/showthread.php?t=2627671
The only thing that puzzles me now is i am unable to perform a system recovery from HP update.zip using cwm.
http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=6608632#N147
So right now i am stuck with 4.2.2 evga ROM all is good and functional.
I have read some post that by updating OTA fix issue in 4.4 but i have no idea on how to get the OTA update.
p/s: This is my first tablet and root attempt...
edit:
i found out that rootjunky has already released the 4.4.2 with 2.3 OTA i will give it a try and feedback later
Click to expand...
Click to collapse
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571
There was an individual who has received the 4.4.2 update from HP on his Slate Extreme over at the HP forums. I believe he stated he received 20 units donated directly from HP and was wondering why only 1 of them received the update. I believe the reason stated is that he most likely received a non-retail unit by accident. Not sure if he ever dumped the ROM or even knows how. I don't know either otherwise I'd try to contact him to get him to do so.
Re-write recovery partition?
Robo_Leader said:
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571
Click to expand...
Click to collapse
I did flash the modified update.zip but CWM doesn't give me the option to re-write the recovery partition. I go straight to "Install from sdcard complete". How is that re-write done?
*Update* All done - Had to select NO to questions on reboot (Replace recovery and root). Thanks so much - back to stock 4.2.2
Belmichel said:
I did flash the modified update.zip but CWM doesn't give me the option to re-write the recovery partition. I go straight to "Install from sdcard complete". How is that re-write done?
*Update* All done - Had to select NO to questions on reboot (Replace recovery and root). Thanks so much - back to stock 4.2.2
Click to expand...
Click to collapse
See my HP Slate 7 Extreme Root post: http://forum.xda-developers.com/showthread.php?t=2850893
What am I supposed to open updater-script with?
---------- Post added at 03:47 AM ---------- Previous post was at 03:31 AM ----------
Robo_Leader said:
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571
Click to expand...
Click to collapse
---------- Post added at 04:25 AM ---------- Previous post was at 03:47 AM ----------
I downloaded a script editor and deleted the first three lines of updater script but it still fails to flash.
Finally success!
Robo_Leader said:
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571
Click to expand...
Click to collapse
I have the 4450 extreme and one the things that was a little different- is that I had put the update zip on the sd card prior and it did the update on its own... WEIRD but acceptable! rooted and on 4.4.2- thanks man!
I didn't have any luck doing it this way. I ended up getting there by a slightly different avenue.
My s7e was totally non functional beyong fastboot and recovery mode being operational. I ended up downloading tegratools 2.2. Using the fastboot included in that I unlocked my boot loader with fastboot by the command
Code:
fastboot -i 0x03F0 oem unlock
(The '-i 0x03F0' is a code relating to the specific model, apparently without this the tablet will ignore your command. Please also remember that the unlock factory resets the tablet.)
It may be overboard again, but I also formatted all the system partitions
Code:
fastboot -i 0x03F0 erase boot
fastboot -i 0x03F0 erase system
fastboot -i 0x03F0 erase userdata
fastboot -i 0x03F0 erase cache
fastboot -i 0x03F0 erase preinstall
fastboot -i 0x03F0 reboot
I uploaded cwm recovery from the above version of tegratools to my s7e as it seems a bit more forgiving with signatures than the stock recovery. I used that to upload a version of update.zip with the "assert" lines removed from META-INF\com\google\android\updater-script. I also self signed the .zip to reduce the likelyhood of my upload being rejected by the tablet, it may not be needed, but I did it anyway.
Code:
adb sideload slate7update-signed.zip
when completing the firmware flash, apparently there is a common problem of the kernel not flashing correctly when recovery takes place and giving an "Error 7", this is the problem I think you solved by re-writing the unmodified firmware (but that didn't work for me)
Anyway I had to fix it by dropping back to fastboot and flashing it to "staging", which puts the kernel in a placeholder until the next boot, at which point the kernel will be written to the correct spot. Because of this writing to the correct partition, you will notice a quick double-boot as the updated kernel is written to the correct point in firmware.
Code:
fastboot -i 0x03F0 flash staging "c:\fastboot-s7e\blob"
I hope this helps.
Oh and to those curious, the beats version appears incompatible with the standard s7e, I tried modifying a rom in the same way as above and it just went to a blank screen. My guess is they've done some form of sanity check in the kernel, given that every "beats" version I've read about in tablets has been a software-only modification. I've not bothered trying to use the beats version rom with the s7e kernel, I'll leave that for someone else to try in greater depth as I'm just happy that I got everything working again.
references:
Fastboot (previously this): This is a copy of the twrp/cwm roms as well as fastboot & adb taken from tegratools 2.2 mentioned above.
SignApk (Previously this): The java files and self signing certificate I used to sign the .zip file. It was actually a bit of a pain to find a working signapk.jar that had the valid certificates included, most were broken in one way or another when trying to sign on ubuntu 12.04.
slate7update-signed.zip (previously this): A signed copy of update.zip with META-INF\com\google\android\updater-script modified to remove the assert validation lines sanity checks, be careful with this, you could nuke your tablet if you use it on an incompatible bit of hardware.
guide.txt (previously this): A full how-to with a number of things I've omitted from this response.
To those wondering, I collated the above procedure from a dozen different links on a good four or five websites, including a number of threads here on XDA. Thank you to anyone out there that contributed to the information I found, you really made my day so much better in being able to recover my tablet.
It Worked! But...
mike-s said:
I didn't have any luck doing it this way. I ended up getting there by a slightly different avenue.
My s7e was totally non functional beyong fastboot and recovery mode being operational. I ended up downloading tegratools 2.2. Using the fastboot included in that I unlocked my boot loader with fastboot by the command
Code:
fastboot -i 0x03F0 oem unlock
(The '-i 0x03F0' is a code relating to the specific model, apparently without this the tablet will ignore your command. Please also remember that the unlock factory resets the tablet.)
It may be overboard again, but I also formatted all the system partitions
Code:
fastboot -i 0x03F0 erase boot
fastboot -i 0x03F0 erase system
fastboot -i 0x03F0 erase userdata
fastboot -i 0x03F0 erase cache
fastboot -i 0x03F0 erase preinstall
fastboot -i 0x03F0 reboot
I uploaded cwm recovery from the above version of tegratools to my s7e as it seems a bit more forgiving with signatures than the stock recovery. I used that to upload a version of update.zip with the "assert" lines removed from META-INF\com\google\android\updater-script. I also self signed the .zip to reduce the likelyhood of my upload being rejected by the tablet, it may not be needed, but I did it anyway.
Code:
adb sideload slate7update-signed.zip
when completing the firmware flash, apparently there is a common problem of the kernel not flashing correctly when recovery takes place and giving an "Error 7", this is the problem I think you solved by re-writing the unmodified firmware (but that didn't work for me)
Anyway I had to fix it by dropping back to fastboot and flashing it to "staging", which puts the kernel in a placeholder until the next boot, at which point the kernel will be written to the correct spot. Because of this writing to the correct partition, you will notice a quick double-boot as the updated kernel is written to the correct point in firmware.
Code:
fastboot -i 0x03F0 flash staging "c:\fastboot-s7e\blob"
I hope this helps.
Oh and to those curious, the beats version appears incompatible with the standard s7e, I tried modifying a rom in the same way as above and it just went to a blank screen. My guess is they've done some form of sanity check in the kernel, given that every "beats" version I've read about in tablets has been a software-only modification. I've not bothered trying to use the beats version rom with the s7e kernel, I'll leave that for someone else to try in greater depth as I'm just happy that I got everything working again.
references:
Fastboot: This is a copy of the twrp/cwm roms as well as fastboot & adb taken from tegratools 2.2 mentioned above.
SignApk: The java files and self signing certificate I used to sign the .zip file. It was actually a bit of a pain to find a working signapk.jar that had the valid certificates included, most were broken in one way or another when trying to sign on ubuntu 12.04.
slate7update-signed.zip: A signed copy of update.zip with META-INF\com\google\android\updater-script modified to remove the assert validation lines sanity checks, be careful with this, you could nuke your tablet if you use it on an incompatible bit of hardware.
guide.txt: A full how-to with a number of things I've omitted from this response.
To those wondering, I collated the above procedure from a dozen different links on a good four or five websites, including a number of threads here on XDA. Thank you to anyone out there that contributed to the information I found, you really made my day so much better in being able to recover my tablet.
Click to expand...
Click to collapse
I was able to unlock my bootloader using the above method and it worked. My s7e rebooted and everything was working normally. I loaded the bootloader again to go in and do a cache wipe and my 3 year old bumped into me as I was holding down the volume+ and power buttons. Now I'm stuck in ADX mode (black screen but recognized by my pc, have tried connecting to charger, volume+ and power, volume - and power, nothing works) . I've read that Advent has released adx files for the Vega Note 7 and you can use Tegra Note 7 Super Tools to restore the Nvidia Note 7. I'm wondering if I can use the update.zip file and the nvflash files from Nvidia to restore my tablet from ADX mode.
Any suggestions?
Mike-S, Thanks for the in depth how-to. I tried to sell my Extreme 4450 and the guy that I sold it to said when he received it was in boot loop. I got it back and it is indeed the one I sent him, however, now I have a bricked tab that doesn't even allow fastboot. I have, like others tried calling HP, tried installing per you instruction and finally considered just throwing away or selling. I almost seems like the recovery was wiped... I can get to uploading from SD and have tried using your info to accomplish with no success. Any suggestions? I hate to smash it or try and sell if I can fix it.
Thank you in advance for anyone's help
som1special2 said:
however, now I have a bricked tab that doesn't even allow fastboot. I have, like others tried calling HP, tried installing per you instruction and finally considered just throwing away or selling.
Click to expand...
Click to collapse
Damn, I'm sorry to say that I'm unsure if i'll be able to help much or at all. All i can suggest is look and see if there is any pre-boot subsystem that connects to your pc via usb, similar to the mediatek "preboot mt65xx" which can sort of provide a last gasp chance of recovery.
help with ROM
Hi there,
Need desperate help. I followed the instructions here but ended up with no OS in the s7e. I kept on trying to install a signed ROM via ADB, it reaches 100% senidng but always failed inside TWRP. Not succesful even with CWM. I even tried installing from SD card but no success. Please help, thank you.
Anyone still around here?
Mike S ... not sure you (or anyone else) is paying any attention to this thread anymore (and the HP Slate 7 Extreme at this point is a fairly old device) ... but I can't get any of these methods to work and my S7E (model 4450) is basically useless right now. When cold (i.e. not booted up in prior 30mins or so), I can boot it normally, but within about 10mins, it will "crash" to the all-white HP splash screen and will never recover. Holding the power button just has it go through initial startup, get to the white HP splash screen, and sit there until the battery runs down. I haven't been able to root it yet, so the bootloader still shows "locked". What's ironic is that this device is really all I need -- I don't play high-end games and mostly just stream shows -- but now it's completely unusable. I'm not sure which is easier ... trying to get this to root or just buying something else?
So far, to root, I've tried towelroot and Cydia Impactor, but both of those returned errors as others have reported. I tried following the steps that Mike S put up here, but without my tablet being rooted, adb and fastboot don't even detect my device from the PC (though the PC detects it because I'm able to see it in Windows Explorer and drag files to the storage) ... so it seems like I can't even get to install CWM or anything further.
Maybe the right thing to do is just to dump the paperweight ... it used to work so well but about 6 months ago this stupid HP white screen crash started happening, and since then it's become a regular thing that only takes about 10 mins (at most) before it craps out. I can get to the bootloader and onboard recovery mode, but that doesn't let me load anything.
Not sure where to go next but any advice would be appreciated!
--AJ
MGrad92 said:
Mike S ... not sure you (or anyone else) is paying any attention to this thread anymore (and the HP Slate 7 Extreme at this point is a fairly old device) ... but I can't get any of these methods to work and my S7E (model 4450) is basically useless right now. When cold (i.e. not booted up in prior 30mins or so), I can boot it normally, but within about 10mins, it will "crash" to the all-white HP splash screen and will never recover. Holding the power button just has it go through initial startup, get to the white HP splash screen, and sit there until the battery runs down. I haven't been able to root it yet, so the bootloader still shows "locked". What's ironic is that this device is really all I need -- I don't play high-end games and mostly just stream shows -- but now it's completely unusable. I'm not sure which is easier ... trying to get this to root or just buying something else?
So far, to root, I've tried towelroot and Cydia Impactor, but both of those returned errors as others have reported. I tried following the steps that Mike S put up here, but without my tablet being rooted, adb and fastboot don't even detect my device from the PC (though the PC detects it because I'm able to see it in Windows Explorer and drag files to the storage) ... so it seems like I can't even get to install CWM or anything further.
Maybe the right thing to do is just to dump the paperweight ... it used to work so well but about 6 months ago this stupid HP white screen crash started happening, and since then it's become a regular thing that only takes about 10 mins (at most) before it craps out. I can get to the bootloader and onboard recovery mode, but that doesn't let me load anything.
Not sure where to go next but any advice would be appreciated!
--AJ
Click to expand...
Click to collapse
Get your device drivers right (try androidsdk if it's still not getting recognised) and fastboot the stock system images (fastboot is not root dependent). By the way why were you trying those weird rooting methods ??? Just flash supersu from cwm/twrp and be done with it.
Thanks ... I'll try androidsdk. I actually am a root n00b and so I was trying to figure out the simplest way to go. I guess I guessed wrong! But of course before I can get that working I need the right drivers ... So I'll try that first. I was thinking the drivers were OK since my PC recognized the S7E when Android loaded (before it crashed to the white screen).
Couldn't get androidsdk to work
Hello again... I never could get androidsdk to work. My computer never recognized the tablet to be able to fastboot. *sigh* As much as I hate to give up, I don't know what else to do.... I might try another PC?
Looking for update.zip for S7E
mike-s said:
I didn't have any luck doing it this way. I ended up getting there by a slightly different avenue.
My s7e was totally non functional beyong fastboot and recovery mode being operational. I ended up downloading tegratools 2.2. Using the fastboot included in that I unlocked my boot loader with fastboot by the command
Code:
fastboot -i 0x03F0 oem unlock
(The '-i 0x03F0' is a code relating to the specific model, apparently without this the tablet will ignore your command. Please also remember that the unlock factory resets the tablet.)
It may be overboard again, but I also formatted all the system partitions
Code:
fastboot -i 0x03F0 erase boot
fastboot -i 0x03F0 erase system
fastboot -i 0x03F0 erase userdata
fastboot -i 0x03F0 erase cache
fastboot -i 0x03F0 erase preinstall
fastboot -i 0x03F0 reboot
I uploaded cwm recovery from the above version of tegratools to my s7e as it seems a bit more forgiving with signatures than the stock recovery. I used that to upload a version of update.zip with the "assert" lines removed from META-INF\com\google\android\updater-script. I also self signed the .zip to reduce the likelyhood of my upload being rejected by the tablet, it may not be needed, but I did it anyway.
Code:
adb sideload slate7update-signed.zip
when completing the firmware flash, apparently there is a common problem of the kernel not flashing correctly when recovery takes place and giving an "Error 7", this is the problem I think you solved by re-writing the unmodified firmware (but that didn't work for me)
Anyway I had to fix it by dropping back to fastboot and flashing it to "staging", which puts the kernel in a placeholder until the next boot, at which point the kernel will be written to the correct spot. Because of this writing to the correct partition, you will notice a quick double-boot as the updated kernel is written to the correct point in firmware.
Code:
fastboot -i 0x03F0 flash staging "c:\fastboot-s7e\blob"
I hope this helps.
Oh and to those curious, the beats version appears incompatible with the standard s7e, I tried modifying a rom in the same way as above and it just went to a blank screen. My guess is they've done some form of sanity check in the kernel, given that every "beats" version I've read about in tablets has been a software-only modification. I've not bothered trying to use the beats version rom with the s7e kernel, I'll leave that for someone else to try in greater depth as I'm just happy that I got everything working again.
references:
Fastboot: This is a copy of the twrp/cwm roms as well as fastboot & adb taken from tegratools 2.2 mentioned above.
SignApk: The java files and self signing certificate I used to sign the .zip file. It was actually a bit of a pain to find a working signapk.jar that had the valid certificates included, most were broken in one way or another when trying to sign on ubuntu 12.04.
slate7update-signed.zip: A signed copy of update.zip with META-INF\com\google\android\updater-script modified to remove the assert validation lines sanity checks, be careful with this, you could nuke your tablet if you use it on an incompatible bit of hardware.
guide.txt: A full how-to with a number of things I've omitted from this response.
To those wondering, I collated the above procedure from a dozen different links on a good four or five websites, including a number of threads here on XDA. Thank you to anyone out there that contributed to the information I found, you really made my day so much better in being able to recover my tablet.
Click to expand...
Click to collapse
Hey Mike, you wouldn't still happen to have that signed update.zip since you've don't have it on Dropbox anymore?
The aim of this thread is to make an easy guide to flashing stock firmware. Owners of previous nexus devices already know all this stuff, this thread is aimed at making the process as simple as possible for new users. This will work regardless of what modifications you've done to your device. Remember to backup all your important data and do this with the knowledge that all flashing activity carries some risk.
Download
Factory image here
(for windows users) Minimal adb & fastboot
(for mac users) adb & fastboot for mac
Follow the instructions to install adb on your computer.
Prepare your tablet
Enable developer options in settings > about tablet and tapping build number 7 times
Open developer options and enable usb debugging. (If you haven't unlocked your bootloader yet, tick enable oem unlock)
Extract images
Place the downloaded factory image inside your adb folder and extract with 7zip.
A new folder will be there called something like volantis-lrx21. Open and extract "image-xxxxx-zip" to your adb folder. We are interested in these files:
bootloader-flounder-xxxxxx.img
boot.img
recovery.img
cache.img
system.img
vendor.img
Place these files directly into your adb folder.
# I recommend renaming the 'bootloader-flounder-xxxxxx.img' to just 'bootloader.img' to make it easier to type.
Now that everythings set up, we can start flashing
Plug in your device. Open the adb folder, hold shift and right click and select open command window here
(if your having driver issues try using Pdanet)
Run these commands one at a time
Code:
adb devices
adb reboot bootloader
if you haven't unlocked the bootloader yet run
Code:
fastboot oem unlock
and follow the instructions using the volume keys to scroll through the menu. This procedure will wipe all data.
Run the following commands one at a time
Code:
fastboot flash bootloader bootloader-flounder-xxxxxxx.img
[B] [I](replace 'bootloader-flounder-xxxxx.img' with full name of bootloader image[/I])[/B]
fastboot reboot-bootloader
fastboot -w
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
fastboot flash system system.img
fastboot flash vendor vendor.img
(OPTIONAL) At this stage you can relock the bootloader if you want by running the command
Code:
fastboot oem lock
finally reboot the device by running
Code:
fastboot reboot
Thats it. Enjoy your tablet in factory condition
Great. Is it possible to make a batch file to run all the commands at once?
albsat said:
Great. Is it possible to make a batch file to run all the commands at once?
Click to expand...
Click to collapse
There is already a flash all batch script that comes with the firmware files but I've noticed that some people have problems with it so I decided not to include it. It should work fine most of the time.
i am long-time familiar with htc,but new to nexus. i was looking thru a couple downloaded factory image files and having noticed that "rebootRUU" is an oem command,and that "image-xxxxx-zip" contains an android info document,i am curious if anyone has tried flashing image-xxxxx-zip as a zip file,in ruu mode?
Cool, thanks for the information.
Thanks for creating this! Will come in handy. Saving this for later
This has been useful as the update from 5.0.1 to 5.0.2 kept failing on my rooted device. It was successful and educational.
scotty1223 said:
i am long-time familiar with htc,but new to nexus. i was looking thru a couple downloaded factory image files and having noticed that "rebootRUU" is an oem command,and that "image-xxxxx-zip" contains an android info document,i am curious if anyone has tried flashing image-xxxxx-zip as a zip file,in ruu mode?
Click to expand...
Click to collapse
I indeed tried this as a last chance hoping it would bypass bootloader lock protection. It didn't work since I think the factory image is not signed by HTC as RUU are . It also lead to a fastboot crash. Now sending my nexus 9 for RMA
Sent from my HTC One using XDA Free mobile app
remedya said:
This has been useful as the update from 5.0.1 to 5.0.2 kept failing on my rooted device. It was successful and educational.
Click to expand...
Click to collapse
Same here. The manual flash method worked very well. Here's hoping that Google doesn't muck 5.1
cant flash stock rom
I'm trying to downgrade my nexus 9 from DU rom 5.1.1 to stock for everything. I'm running the flash-all.sh on linux while my tablet is in bootloader mode. Tab makes and few checks and reboots automatically in bootloader mode. I reboot tablet and still has the DU rom. Any tips
nyasha1935 said:
I'm trying to downgrade my nexus 9 from DU rom 5.1.1 to stock for everything. I'm running the flash-all.sh on linux while my tablet is in bootloader mode. Tab makes and few checks and reboots automatically in bootloader mode. I reboot tablet and still has the DU rom. Any tips
Click to expand...
Click to collapse
The flash all script doesn't seem to work on linux. You shouldn't have a problem if you write the commands out manually.
nyasha1935 said:
I'm trying to downgrade my nexus 9 from DU rom 5.1.1 to stock for everything. I'm running the flash-all.sh on linux while my tablet is in bootloader mode. Tab makes and few checks and reboots automatically in bootloader mode. I reboot tablet and still has the DU rom. Any tips
Click to expand...
Click to collapse
Art Vanderlay said:
The flash all script doesn't seem to work on linux. You shouldn't have a problem if you write the commands out manually.
Click to expand...
Click to collapse
As indicated, the flash all script doesn't work very well on any system. Flash each .img separately via fastboot.
cam30era said:
As indicated, the flash all script doesn't work very well on any system. Flash each .img separately via fastboot.
Click to expand...
Click to collapse
Problem is that the tgz is too big for the device's buffer, so it craps out before it actually writes the images. Its been this way for a while over several different nexus devices. Kind of like nobody at google ever even bothered to test the process.
doitright said:
Problem is that the tgz is too big for the device's buffer, so it craps out before it actually writes the images. Its been this way for a while over several different nexus devices. Kind of like nobody at google ever even bothered to test the process.
Click to expand...
Click to collapse
I agree.
I also used Linux but I executed the commands individually rather than using the script. It worked.
remedya said:
I also used Linux but I executed the commands individually rather than using the script. It worked.
Click to expand...
Click to collapse
I cant flash system.img I get error
sending 'system' (1108544 KB)...
FAILED (remote: data length is too large)
finished. total time: 0.105s
nyasha1935 said:
I cant flash system.img I get error
sending 'system' (1108544 KB)...
FAILED (remote: data length is too large)
finished. total time: 0.105s
Click to expand...
Click to collapse
Update your Android SDK.
These instructions also worked with 5.1.1
im trying to install back to facctory i erased my system and recovery and data and now when i try to flash bootloader i get error cannot open bootloader someone please im stuck in bootloader mode
maxtcee said:
im trying to install back to facctory i erased my system and recovery and data and now when i try to flash bootloader i get error cannot open bootloader someone please im stuck in bootloader mode
Click to expand...
Click to collapse
Are you writing the full name and file path for the bootloader img?
Hello to everybody, so i was thinking my nakasi was really dead this time, the last thing i did was flashing a 5.1.1 rom next when i rebooted got stuck on lolipop boot loop so i restarted the tablet
manually to access the recovery, and to my awe, i couldn't no more access the recovery ! (latest twrp) tried again and again nothing, no recovery no bootloader, can't start the OS
always stuck on google logo with the options above, start, bootloader, recovery etc, today i realized i could access the bootloader and fastboot mode (ADB recognize my device when i type fastboot devices)
so i tried flashing stock image and stuff with no luck, tried many stock roms, tried wug's toolkit and the flash all.bat still no luck, i get all kind of error messages here is a screenshot, help is really appreciated if there is anything i can do to save it :
View attachment 3305126
the problem seems to be that i can't write the things i send to the tablet via ADB, tried the NVflash recovery today and got :
View attachment 3306049
Have you tried not imputing the full file address as you have the emulator already running from that location.
So recovery command would be.
Fastboot flash recovery "name of recovery Img file here"
Just make sure that the image file is in the platform-tools folder.
Probably not your issue but its going to save you some typing.
Good luck
gaosphappy said:
Have you tried not imputing the full file address as you have the emulator already running from that location.
So recovery command would be.
Fastboot flash recovery "name of recovery Img file here"
Just make sure that the image file is in the platform-tools folder.
Probably not your issue but its going to save you some typing.
Good luck
Click to expand...
Click to collapse
Thank you for the tip I'll certainly use it, but i don't think it is the culprit since as you can see in the screenshots
the files get sent successfully but cannot be written, my bootloader is unlocked by the way
Homurato said:
Thank you for the tip I'll certainly use it, but i don't think it is the culprit since as you can see in the screenshots
the files get sent successfully but cannot be written, my bootloader is unlocked by the way
Click to expand...
Click to collapse
Did you try the latest factory image? I noticed you are flashing a very old bootloader, possibly the first one? 4.23 is the current version.
Where is flatline_grouper.img coming from? I've never seen that.
adomol said:
Did you try the latest factory image? I noticed you are flashing a very old bootloader, possibly the first one? 4.23 is the current version.
Where is flatline_grouper.img coming from? I've never seen that.
Click to expand...
Click to collapse
Hello kind sir, of course at first i tried the 5.1.1 full factory image with the NRT toolkit and got the same writing errors next i tried many bootloaders
(one of them found it here as a 100% working bootloader) the Flatline is the recovery of the NVflash tool where you can access it to unbrick full bricked N7s
if you got blobs.bin of your N7 backed up (clearly not my case)
the flashing writing error i get it with everything i try to flash, recoverys bootloader system etc
when i send them with the flash all command they got sent to the tablet okay, but when writing i get the errors
i don't know but there is a small informations if that can help, before it broke my system was in EXT4 and all the rest in F2FS
It's entirely possible your memory has failed. I'm reading more and more people running into corrupted memory issues.
You can get a replacement motherboard cheap on eBay if nothing else works.
fwayfarer said:
It's entirely possible your memory has failed. I'm reading more and more people running into corrupted memory issues.
You can get a replacement motherboard cheap on eBay if nothing else works.
Click to expand...
Click to collapse
I'm still hoping for a software solution since my fastboot works fine, I'll let the motherboard solution my last i guess
Hello some news about the still staggering situations : when the tablet is off and i put the charger i get the battery refiling animation ! so that mean the bootloader isn't broken
and i still can access fastboot mode, even when i push a bootloader i get a signature match message, but the problem is still that the things i push can't be written as i'm still getting a :
FAILED <Remote: <FileWriteFailed>> changed usb cables, changed ports, the last time the tablet was working i had the system on EXT4 and the rest on F2FS, maybe if i can convert everything to EXT4 ?
Hello!
I have the Nexus 6P and I have successfully rooted 16 phones over the past 4 years and never had a problem I couldn't fix. Today I made a mess of my new phone.
I had a perfectly working custom ROM with an unlocked boot loader with TWRP (2.8.7.2) installed. I installed some custom soft keys and got into a boot loop. I went and flashed what I thought was the stock ROM according to the website I was following, and I re locked my boot loader like a fool and was going to eventually unlock it.... turns out I was still boot looped.
I have tried:
sideloading 3 different zips, always get the message "cannot read zip" whatever the zip is
I tried changing the names, doing the full names, doing a stock rooted zipped ROM, nothing works.
I have used SkipSoft and Wugs toolkit and I can't flash ANYTHING or transfer files onto the phone unless the bootloader is unlocked.
I have installed the Google drivers multiple times, ADB devices always works, it seems to not be a driver issue because I can do everything else fine.
I have let the phone sit for 35 minutes in bootloop waiting for it to come back online so I can tick that "OEM unlock" button in the settings menu.
I have also done a dozen other things, the problem is nothing I have done or tried allows me to get any ROM or any file onto the device to flash in TWRP.
Help?
ok shot in the dark here. I had a boot loop until I flashed the flashable vendors zip
I got it in this thread:
http://forum.xda-developers.com/nexus-6p/development/rom-pure-nexus-layers-fi-wifi-calling-t3244563
Give it a whirl if you haven't already.
Found this in the Pure Nexus Project thread, so props to them for providing this.
-MotoNexus- said:
Hello!
I have the Nexus 6P and I have successfully rooted 16 phones over the past 4 years and never had a problem I couldn't fix. Today I made a mess of my new phone.
I had a perfectly working custom ROM with an unlocked boot loader with TWRP (2.8.7.2) installed. I installed some custom soft keys and got into a boot loop. I went and flashed what I thought was the stock ROM according to the website I was following, and I re locked my boot loader like a fool and was going to eventually unlock it.... turns out I was still boot looped.
I have tried:
sideloading 3 different zips, always get the message "cannot read zip" whatever the zip is
I tried changing the names, doing the full names, doing a stock rooted zipped ROM, nothing works.
I have used SkipSoft and Wugs toolkit and I can't flash ANYTHING or transfer files onto the phone unless the bootloader is unlocked.
I have installed the Google drivers multiple times, ADB devices always works, it seems to not be a driver issue because I can do everything else fine.
I have let the phone sit for 35 minutes in bootloop waiting for it to come back online so I can tick that "OEM unlock" button in the settings menu.
I have also done a dozen other things, the problem is nothing I have done or tried allows me to get any ROM or any file onto the device to flash in TWRP.
Help?
Click to expand...
Click to collapse
Thanks, the problem is I can't find a way to sideload anything or move a file over. Everything results in a myriad of errors.
tigercranestyle said:
at worst, you would have to invoke the flash-all command via adb once you extracted the couple of times that you have to. directions are on google's factory image site.
may not be the answer that you were looking for, but it always feels great having a clean device to work with. i mean as it stands, you would have to set everything back up on whatever rom anyway if you somehow got out of the problems you were having. you would spend more time doing that instead of just going the factory image route.
toolkits are fun, but learning your way around them is even more so.
Click to expand...
Click to collapse
I'm gonna check the flash all,I've never done that before. I think that would be all the images in the tgz factory image? Anything to get my phone back yeah, I just need it working again.
-UPDATE- I tried the flash all batch in the system image and I tried the flash all batch command and neither work.
Hey man - crazy story - I literally just got done messing with a toolkit and the EXACT same situation happened to me. Locked bootloader, bootloop, everything. What you need to do is do a complete wipe of everything in TWRP so you can access /data from your PC (unless it isn't messed up currently, and you can decrypt within TWRP, I couldn't...) Then, download Cataclysm (maybe something else will work, idk, but I just did it with cataclysm) and bam - it boots, head to developer options and get the box checked.
Stock images didn't work, nothing did... was scared I had a brick. The saving grace for us is that we both got TWRP installed. No more toolkits for me!
Melamunna said:
Hey man - crazy story - I literally just got done messing with a toolkit and the EXACT same situation happened to me. Locked bootloader, bootloop, everything. What you need to do is do a complete wipe of everything in TWRP so you can access /data from your PC (unless it isn't messed up currently, and you can decrypt within TWRP, I couldn't...) Then, download Cataclysm (maybe something else will work, idk, but I just did it with cataclysm) and bam - it boots, head to developer options and get the box checked.
Stock images didn't work, nothing did... was scared I had a brick. The saving grace for us is that we both got TWRP installed. No more toolkits for me!
Click to expand...
Click to collapse
I have already done the advance wipe and the format data, I just tried again and my computer will not read it as storage with MTP enabled.
Thanks though!
tigercranestyle said:
after extracting the tgz file, it should become a tar file. after extracting that tar file, it should become the six files listed below. these files should be in platform-tools to start from scratch.
bootloader-angler-angler-02.45.img
flash-all.bat
flash-all.sh
flash-base.sh
image-angler-mmb29m.zip
radio-angler-angler-02.50.img
once they are, open command line in that directory (platform-tools) and then "flash-all" should work. if it doesn't make sure you post the error that you're getting on your computer so that others can help.
Click to expand...
Click to collapse
I followed all these steps, I unzipped it and everything and put it in my fastboot folder. I still get the "unknown partition "all" " orrr flash is not recognized as an internal or external command, operable program or batch file. In an attempt with desperation I tried opening every version of the batch file, in the tgz and tar and unzipped AND in the fastboot and it all gives the radio img error.
I still do have my fastboot device connected, to my knowledge that means it can't be a driver problem right?
-MotoNexus- said:
I followed all these steps, I unzipped it and everything and put it in my fastboot folder. I still get the "unknown partition "all" " orrr flash is not recognized as an internal or external command, operable program or batch file. In an attempt with desperation I tried opening every version of the batch file, in the tgz and tar and unzipped AND in the fastboot and it all gives the radio img error.
I still do have my fastboot device connected, to my knowledge that means it can't be a driver problem right?
Click to expand...
Click to collapse
You can't flash anything in fastboot with a locked bootloader. The only way you can get your device to work is by using TWRP to flash a rom.
The flash all command doesn't work because the extracted tar file has A zipped folder inside that has to be extracted also with radio and I think recovery zipped up. You have to extract those two files to put them in the tar file and then you might be able to flash all. But as long as you can fastboot devices you should be able to flash all 6 files and have a brand new device.
tigercranestyle said:
sorry for the late reply. not always here.
1. did you unlock the bootloader again before doing all of this?
2. list the files that are in your platform-tools folder.
3. when you executed the "flash-all" command earlier, you did do it with the dash in between flash and all... right? also, you're doing it without the quotation marks, right?
sorry if they seem silly. just never really know.
Click to expand...
Click to collapse
He can't unlock the bootloader without booting into a rom. He needs to use twrp to flash a full system but I am not sure how to help with that when he can't sideload.
just an unrelated question... why did you lock the bootloader again? what was the purpose?
also, as mentioned... locked bootlader, odds arre USB debugging and OEM unlock are also not checked.... afaik, youre in trouble... hopefully someone else can sav you, im out of ideas
akellar said:
You can't flash anything in fastboot with a locked bootloader. The only way you can get your device to work is by using TWRP to flash a rom.
Click to expand...
Click to collapse
Are you telling me that I'm bricked?
I have no way of transfering files to the devices, it won't read as anything to transfer files and ADB won't sideload anything.
tigercranestyle said:
sorry for the late reply. not always here.
1. did you unlock the bootloader again before doing all of this?
2. list the files that are in your platform-tools folder.
3. when you executed the "flash-all" command earlier, you did do it with the dash in between flash and all... right? also, you're doing it without the quotation marks, right?
sorry if they seem silly. just never really know.
Click to expand...
Click to collapse
Neither am I , I just got back from a trip. I have the fastboot exe adb exe mfastboot exe the ADB api files, and the ROMs I tried to sideload along with all the images I pushed to the device.
Originally I had the bootloader unlocked, like I said I was being a fool blindly following a tutorial to get back to stock and I locked it too soon.
Yeah, I tried flash-all flash all and flash flash-all / flash flash all
dontbeweakvato said:
The flash all command doesn't work because the extracted tar file has A zipped folder inside that has to be extracted also with radio and I think recovery zipped up. You have to extract those two files to put them in the tar file and then you might be able to flash all. But as long as you can fastboot devices you should be able to flash all 6 files and have a brand new device.
Click to expand...
Click to collapse
Okay I unzipped that folder and put all the files in the fastboot folder, I still get the same error. The thing that scares me here is I can use the batch file now and it just gives me an error saying it can't flash because it's bootloader is locked.
Soulfly3 said:
just an unrelated question... why did you lock the bootloader again? what was the purpose?
also, as mentioned... locked bootlader, odds arre USB debugging and OEM unlock are also not checked.... afaik, youre in trouble... hopefully someone else can sav you, im out of ideas
Click to expand...
Click to collapse
They are default unchecked, hence the reason I can't unlock the bootloader again. I said it in my first post, I was being a fool following some guide to get back to stock and ******* up a step.
rift999 said:
He can't unlock the bootloader without booting into a rom. He needs to use twrp to flash a full system but I am not sure how to help with that when he can't sideload.
Click to expand...
Click to collapse
Is there not a way to fix the sideload? Or a way to get my computer to read it as a media devices so I can transfer files or something? It's always worked with previous phones but my computer reads the 6P differently. (even when it was working)
Stop trying to fastboot flash anything, it will not work as I've already started multiple times. The only option you have is to get something moved to storage and flash it from twrp.
akellar said:
Stop trying to fastboot flash anything, it will not work as I've already started multiple times. The only option you have is to get something moved to storage and flash it from twrp.
Click to expand...
Click to collapse
I've tried every driver from Google and Nexus 6P, I can't get it to read the MTP for a file transfer, what would you suggest I do? it doesn't show up as my old phones used to in the computers drives.
I have found 0 success with getting a file on through file transfer or ADB push file.
-MotoNexus- said:
I've tried every driver from Google and Nexus 6P, I can't get it to read the MTP for a file transfer, what would you suggest I do? it doesn't show up as my old phones used to in the computers drives.
I have found 0 success with getting a file on through file transfer or ADB push file.
Click to expand...
Click to collapse
Can't help too much personally, but you might give this a shot:
http://forum.xda-developers.com/showpost.php?p=64317181&postcount=20
Sent from my Nexus 6P using XDA Free mobile app
So I just got it............!!!!! I have spent a total of 16 hours with videos, forums and trial and error. When I was going back the 5th around time messing with drivers I turned my ADB driver into a USB composite because I had no idea I could and instantly I was able to file transfer!!!! Problem solved, I have my ROM on now.
Thank you all for your help! I am so sorry I derped at this, I have been doing this a long time and just got sloppy.