wifi cant connect and is always between conected and disconnected.I ve installed wifi helper and problem seemed solved(connected for a few time) but in the same day returned.Factory reset through pccompanion didnt help(for a lot of times).With all the roms i tried problem still the same
Try these:
1) Forget all networks, turn off and on wifi again and reconnect
2) Reset router
Do you get the problem after your phone comes out of standby mode?
Try these:
1) Forget all networks, turn off and on wifi again and reconnect
2) Reset router
1)not working
2)didnt try it but i think that is not my router fault as it is the same with others routers also
Do you get the problem after your phone comes out of standby mode?
i get it whenever i try to connect to a wifi network
Today i get almost the same problem ... but with me it was because of the data cable .... something is wrong with it and every time it connects / disconnects from the PC i get WiFi network down / up again .... and other thing there are some routers that make problems with phones - just try more places with wifi and maybe you'll be willing to change your router like i do (REPOTEC > TP-LINK )
Related
I have a strange poblem with Wifi. Whenever I try to connect to any accesspoint, secured or otherwise, it displays "CONNECTING" for a while, then reverts to "AVAILABLE". Once in a while, by resetting or turning wifi off and on, Ill be able to connect and then everything is fine. But the moment I trun wifi off and back on, or suspend the unit the error returns.
Update: this is getting even wierder. I am able to connect to _secured_ networks without a problem, but I still cannot connect to unsecured ones.
rokujuuyon said:
Update: this is getting even wierder. I am able to connect to _secured_ networks without a problem, but I still cannot connect to unsecured ones.
Click to expand...
Click to collapse
it would help if you post your GSM/ROM version and to what kind of network you are trying to connect ?
Ok so tis is my problem. the Wifi connects fine. i use it for 10 minutes...20 minutes..it works.. then suddenly.. it stops working?
I go to comm manager the Signal quality is full or 3/4 full (dependent on location). it stays connected... the tx rate is 54Mbps and the Rx Rate jumps between 1-54Mbps.. My network is not security protected but no one uses it except me and my computer.
Im using messeneger then it says " messenger trying to reconnect blah blah) then i go to opera and it stopped working too...but its still connected, the signal strength is still strong?
Whats going on?!
My router is a Netgear DG834GT.. I have put my xperia's mac address on the allowed list as well.. i just dont get it?
i have to disconnect and reconnect to get it working..then it lasts another 5 minutes and dies again? Sometimes when i reconnect it still doesnt work so i have to turn off wifi and turn it on 2 or 3 times?
You are not alone, my friend. That's exactly what happened to me, except mine is Belkin.
Someone here (sorry I can't remember) suggest turning off bluetooth solved the problem.
i would try upgrading the firmware of the router it solves many incompatability issues for many people
sometimes my linksys drops data connection so the wifi signal is just a pin
and only fix is to unplug the router for 10sec and replug it
seems to be common that wifi act up at least see people complain in many many forums for wifi able devices
bluetooth is not on at all... Also every other wifi device will connect just fine? why would it work then just stop?
I have no idear only knows that what i wrote fix it in many cases for many people
i have wifi on even in standby tweaked...did you guys tweak anything? like auto off or anything?
nop i just use wpa AES
but as i said i update my wifi router with the latests firmware when
ever linksys updated it and believe me they updated it often
is anyone facing this problem or faced it before then fixed it?
if it's not your router as Rudegar suggests (one way to test, try over a different wifi elsewhere) then I wonder if your wifi is powering down for some reason?
Hey guys...having the same problem. Firstly I had trouble connecting to Wifi with the Xperia...then I updated the router firmware...now I can connect to Wifi but it does nothing, I cannot surf the net, I cannot connect to Skype I cannot connect to Windows live, cannot check my mail, etc...
Any ideas? Bluetooth etc not on at all...
Xda-viewers,
yesterday i tried to put on my WiFi, but it didn't work anymore
I have my HD2 for about 1month, very happy with the phone,
and this is the first mayor malfunction
When i press WiFi ON in the comm-manager it shows it's loading,
and then nothing, doesn't go ON,
turned the phone off-on, soft reset.. nothing..
anyone else had this glitch?
hard reset or other solution?
It always worked, untill yesterday
If I were you I would go for a full backup with SPB, and then restore (maybe excluding everything regarding the wifi) after a hard reset
I would try doing hard reset.
However, I had the same problem with my old Fujitsu Siemens Pocket Loox N560 and they had to exchange mainboard.
Do you have it charging? I can't seem to connect to any Wifi networks when I have the phone plugged in. Once i disconnect it, it works fine.
If you are connecting it using USB, make sure WMDC / ActiveSync is set to allowing your phone wireless connections while connected to your PC!
???
phone is fully charged
not connected to PC or anything
not working, going to try some things
anyone goto suggestions except hard reset?
else i hard reset tommorow,
thankz
You mean you can't turn ON or NOT CONNECTING?
If its not connecting, did you try to delete the connection settings from advanced wireless settings and try reconnecting again?
skr_xd said:
You mean you can't turn ON or NOT CONNECTING?
If its not connecting, did you try to delete the connection settings from advanced wireless settings and try reconnecting again?
Click to expand...
Click to collapse
It's really not turning ON.
I press the Off-On button, I see it loading and then, nothing,
WiFi is still turned OFF.
timodc said:
It's really not turning ON.
I press the Off-On button, I see it loading and then, nothing,
WiFi is still turned OFF.
Click to expand...
Click to collapse
I've got exactly the same problem - have only noticed it today.
If I go into wireless network config and select my network there and click connect, it takes ages before it says "connected" and then immediately changes to "not connected". I've obviously checked and rechecked my settings. It simply will not connect any more.
i also can't remember installing an update which would cause this probleme..
Connected to PC
When connected to PC, in the comm manager, the WLAN is dissabled, can't even push it, maybe something went wrong with disconnecting and this is the reason why my WiFi is not working - going on?
Anyone?
I'm not at home, so can't do anything with mine at the moment, but out of curiosity, did you use then Wifi N option in BsB Tweaks? That's the only thing Wifi related that I can think of touching recently.
Tried it
Indeed, thought the same,
tried to put Wifi-N off, soft-reset, but no change
Almost at the edge of HARD-reset
timodc said:
Indeed, thought the same,
tried to put Wifi-N off, soft-reset, but no change
Almost at the edge of HARD-reset
Click to expand...
Click to collapse
I really hope it doesn't need a hard reset. I'm not gonna be happy if I have to do that AGAIN!
I'm gonna keep searching, in the hope of finding a solution.
Out of curiosity, do you ever use the Wifi router app?
WM-Wifirouter
I tried to use the Wlan-Router with Comm manager,
didn't work that well,
installed app I had on my P3600: WM-Wifirouter,
this worked like a charm,
Timo
I've solved my problem! Yay!!
I don't know if this will be of any help to you, but give it a try and see how you get on.
Basically, when using the in-built wifi router, it assigned the IP address 192.168.1.1 to the wireless adapter. This is fair enough, for a router, but obviously not for when you want to connect to a wifi network and get assigned an IP address automatically.
I had seen other people suggest that this may be the problem, so I'd already checked my IP settings for the wireless adapter, and they were set to automatic.
However, if you run the wifi router and then go to your IP settings, it says 192.168.1.1. Set it to automatic while the router is running.
This made my phone get a bit upset, and I ended up reseting it, but since then I've been able to connect to my home network again.
So...
1. Run and start the wifi router
2. Go to settings, Connections, Wifi, Wireless networks, Network Adapters (tab)
3. Select the network adapter (Broadcom 802.11 DHD Network Adapter)
4. Change to use a server-assigned IP address, instead of a specific one
5. Click OK
6. Reset the phone - don't close the wifi router app first.
7. When it starts up, go to the comm mananger and disable wifi.
You should now be able to start wifi and connect to your home network. (It may do it automatically if you don't do step 7 - I'm not sure).
Give it a try and let us know how you get on
Sensational johncmolyneux!!!
I had this problem too - it was doing my head in, but now seems like an obvious conflict. Thanks for finding the solution.
Now all I need to do is solve my BT Voice Commander problem (reported in many other threads) and the HD2 will have the same functionality as the Hermes it has replaced ;-)
Cheers,
Lordbowl
You still haven't hard reset?! I am doing hard reset every 6days because of mod/theme and other crap testing
Backups with resco/pim/office2007 entreprise on windows 7 beta do the trick to have phone working in 15 minuts.
johncmolyneux said:
I've solved my problem! Yay!!
I don't know if this will be of any help to you, but give it a try and see how you get on.
Basically, when using the in-built wifi router, it assigned the IP address 192.168.1.1 to the wireless adapter. This is fair enough, for a router, but obviously not for when you want to connect to a wifi network and get assigned an IP address automatically.
I had seen other people suggest that this may be the problem, so I'd already checked my IP settings for the wireless adapter, and they were set to automatic.
However, if you run the wifi router and then go to your IP settings, it says 192.168.1.1. Set it to automatic while the router is running.
This made my phone get a bit upset, and I ended up reseting it, but since then I've been able to connect to my home network again.
So...
1. Run and start the wifi router
2. Go to settings, Connections, Wifi, Wireless networks, Network Adapters (tab)
3. Select the network adapter (Broadcom 802.11 DHD Network Adapter)
4. Change to use a server-assigned IP address, instead of a specific one
5. Click OK
6. Reset the phone - don't close the wifi router app first.
7. When it starts up, go to the comm mananger and disable wifi.
You should now be able to start wifi and connect to your home network. (It may do it automatically if you don't do step 7 - I'm not sure).
Give it a try and let us know how you get on
Click to expand...
Click to collapse
-When I try to connect the WLAN-Router with the Comm Manager, it keeps on loading and nothing happens.
-When I try the WM-Wifi-Router app which I used on my P3600, it says not abble to connect WLAN
-All my settings are server-assigned-IP-address
Still not able to put on my WLAN,
Timo
Hi, I've some problem with wifi connections. I own a lynksis wag54g2 wifi router. I can establish a connection, but after some times (it's not standard, it may vary), my device disconnect from the router and it's not able to reconnect. All that i can do is plug off my router (i take off the ac adapter) and when it's up again my phone can connect. it's very frustating, but i don't know what to do? i've tried setting something in wifi preferences' on my phone but nothing change. i've also flashed my firmware to the new one, hoping that it could fix that problem, but it didn't. someone could help me?
you can update the firmware to a newer one. this would fix your problem.
forum.xda-developers.com/showthread.php?t=781149
Hello.
I have a problem with WIFI on Galaxy 5 (i5500)(Europa) too. They have already changed my phone with new one, but the issue remains. So, for the second time now, I was able to connect my phone to my router for the first time, but after the first interruption or disconnection of WIFI I could not access to wifi anymore.
When I enable wifi in the phone starts ''connecting'' but then reports ''interrupted'' eventhough the signal is recognised as strong.
Firmwire version is the latest available. Router is encrypted with WPA2. Also I can access to router with my HTC Tattoo (Click).
Does anyone know the solution?
I have a decision to make(today), becouse If there is no solution to this I will change to another phone as I still can (Galaxy Spica).
Advise please.
Thanks a lot
What router do you have? have you tried with any other wifi network? i said that because my have this problem only with my router, and not for example with my girlfriend's one.
I found a little fix for my router, linksys wag54g2: open up the config page (192.168.1.1), go for wireless tab, select protection page and click on save settings. that reload the router and my phone is able to connect again.
Hi.
Thanks for your advice. There is some problem with router.. When I restart router the wifi on the phone works until swiched off or interruption becouse being out of range. When I try to connect to wifi again does not work unless I restart router again. ..catchy.. Interfering with mobile connection also makes the drop of wireless connection on my computer, so I need to restart router. I don't know the permanent solution. If anyone has any idea how repair this forever please let me know.
Best,
Thanks
Hi,
Here is my problem with my wifi with the galaxy 550.
For security reasons, my wifi network can't be detected (invisible). If i want to connect a new device by wifi, I must first set my wifi visible and then register my device.
Then I set my wifi as invisible again and the device can connect automaticaly to my network without "seeing" my wifi network.
Problem is that once i set my wifi as invisible again, my galaxy fail to connect because the network is unvisible.
Is there anyway to fix this ?
I have just read similar post on another thread and replied find it here
I ahvent installed anything, perhaps its to do with the handset if its locked to a particular carrier? just a guess and a question...
cheers
helper
try to use static ip!!
CaptainTim said:
Hi,
Here is my problem with my wifi with the galaxy 550.
For security reasons, my wifi network can't be detected (invisible). If i want to connect a new device by wifi, I must first set my wifi visible and then register my device.
Then I set my wifi as invisible again and the device can connect automaticaly to my network without "seeing" my wifi network.
Problem is that once i set my wifi as invisible again, my galaxy fail to connect because the network is unvisible.
Is there anyway to fix this ?
Click to expand...
Click to collapse
I have an answer! Hope it works for you.
My provider gave me really easy solution for wifi connection not connecting even though it was my own network with all the right info. It worked great the first time, then for some reason the phone locked in the "off" position. So I removed the battery to reboot (later learned the right way by pushing the volume button on the left and the power button at the same time)
Anyway, try this....
turn phone off - remove battery - remove sim card - wait a few minutes - reassemble - then the network should log on with no problem.....Good luck!
HeiDuDer said:
try to use static ip!!
Click to expand...
Click to collapse
Didn't work :/
Super1285 said:
I have an answer! Hope it works for you.
My provider gave me really easy solution for wifi connection not connecting even though it was my own network with all the right info. It worked great the first time, then for some reason the phone locked in the "off" position. So I removed the battery to reboot (later learned the right way by pushing the volume button on the left and the power button at the same time)
Anyway, try this....
turn phone off - remove battery - remove sim card - wait a few minutes - reassemble - then the network should log on with no problem.....Good luck!
Click to expand...
Click to collapse
Didn't work neither.
I have same problem after upgrading to 2.3.5 Wi-Fi shown as it is Active, but it is turning off and on and scaning and off again all times
htc tattoo
hellllllllllllllllllllllllllllllllllllllllllllllll llllllllp hellllllllllllllllllllllllllllllp
heeeeeeeeeeelp
helppppppppppppppppppp
I have same problem after upgrading to 2.3.5 Wi-Fi shown as it is Active, but it is turning off and on and scaning and off again all times
I have same problem after upgrading to 2.3.5 Wi-Fi shown as it is Active, but it is turning off and on and scaning and off again all times>>>>>>>>>>>>>>
ok not sure when it happened but, when i connect with wifi it shows both the 3g and wifi symbols and i cant go to any web sites or download, but i can connect with my router. tryed forgetting the settings and connecting again, same same.
i have rebooted the phone by battery pull and tryed to cycle by airplane. i have also tryed diffrent access points all doing the same thing. 3g and wifi symbols show and will not send receive data. except I can access the router configuration.
any ideas??
thanks
Try either rebooting or reset the 3g by cycling in airplane mode. Sometimes mobile data will freeze on the phone and wont allow wifi to connect.