Database Users

DISCUSSION FOR FROYO 2.2.1 AOSP X10 CUSTOM ROM TripNRaVeR

As many have asked for a new thread for the improvements obtained in Rom Froyo TripNRaVeR 2.2.1 and which arrived, I believe that we will be very useful.
cheers
UPDATE VO24 "T" restore for xrecovery "Z" http://dc245.4shared.com/download/YXDSdkmA/Froyo_221_xperia_TripNRaVeR-v0.zip
http://rapidshare.com/files/440354665/Froyo_2.2.1_xperia_TripNRaVeR-v024.zip
UPDATE V024 FOR FLASH MODE INTO CUSTOM.ZIP http://bit.ly/dOzakT thanks th4r
Wifi- only work with IP static
Market- Not work FC
App- some apps not download from market
Camara- not work ( of course )
------------------------------------------------------------------------------------------
fix market
1-requires a clean 2.0.2.A.024 installation. a. zdzihu xrecovery http://forum.xda-developers.com/showthread.php?t=885956
2- install enable jit v02. http://forum.xda-developers.com/showpost.php?p=10058308&postcount=1
3-copy a new file from triPNadVer in sdcard/xrecovery/backup and install with xrecovery restore.
reboot. http://dc245.4shared.com/download/YXDSdkmA/Froyo_221_xperia_TripNRaVeR-v0.zip
4- Take Root Explorer and Delete everything IN the folder "Data/Data/com.android.vending" & "com.android.vending.updater"
(not the folders.. but ALL the stuff they contain)
5-Download the Vending.apk from http://forum.xda-developers.com/showpost.php?p=10259539&postcount=5874 and save it on your SD Card,
then Take the Root Explorer, set permissions to vending.apk, and replace the "System/app/vending.apk" with the new one, you have downloaded.
Reboot your phone and with this the market works.
------------------------------------------------------------------------------------------------------
Mount or unmont sdcard
1-possible into xrecovery mode: xrecovery/partition tools/mount or unmont usb storage .
2-mounting/unmounting sdcard from usb works with multi mount sd-card from market
------------------------------------------------------------------------------------------------
Fix wifi (do not need IP static )
Adb
setprop net.dns1 192.168.1.1

pato66 said:
As many have asked for a new thread for the improvements obtained in Rom Froyo TripNRaVeR 2.2.1 and which arrived, I believe that we will be very useful.
cheers
Click to expand...
Click to collapse
The only problem is that Trip should start the new thread himself, as that would be the only way for him to maintain the main thread info and so on...
MOD: Pleace close this thread !
Sent from my Android phone...

Bugs Rom Froyo 2.2.1 v024
rom TripNRaVeR v024
Bugs
Wifi- only work with IP static
Market- Not work FC
App-some apps not download from market
Camara- not work ( of course )
................

somebody should provide changlog, what is not working and what works, how to install rom, how to use adb shell etc.

Well, for some Market is working...
But it is stupid when Trip does not open the thread

pshdo said:
The only problem is that he should start it himself, as that would be the only way for him to maintain the thread...
MOD: Pleace close this thread !
Sent from my Android phone...
Click to expand...
Click to collapse
Ok,I understand but....... sorry only want to help.

I understand completely
Sent from my Android phone...

yeah it is very confusing, he is doing his own rom in j and z thread but it seems they dont work with each other which is kinda stupid. and then there is some swedish guy which makes his rom into .zip for xrecovery

pshdo said:
The only problem is that Trip should start the new thread himself, as that would be the only way for him to maintain the main thread info and so on...
MOD: Pleace close this thread !
Sent from my Android phone...
Click to expand...
Click to collapse
Perhaps this thread could act like a mirror. i mean if pato66 regularly updates his first post with the links to Trip`s latest release

..........

This is already confusing
sent from my Commodore 64

to the OP please change the title as it will confused people thinking its a thread dedicated to a ROM and not a ROM full of change logs and discussions about bugs in it

chiefy009 said:
This is already confusing
sent from my Commodore 64
Click to expand...
Click to collapse
I hope to TripNRaVeR get this therad and have her own.

I agree that this thread should just be closed.
Sent from my X10i using XDA App

Findee said:
I agree that this thread should just be closed.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
this is not problem.
How I can delete this post?, thanks
anyone can removing this post?, thanks

pato66 said:
rom TripNRaVeR v024
Bugs
Wifi- only work with IP static
Market- Not work FC
App-some apps not download from market
Camara- not work ( of course )
................
Click to expand...
Click to collapse
Don't anyhow report bugs. I have the first 3 work perfectly.
Camera is not even implemented

Even just make this a discussion thread? Or a bugfix thread and request tripnraver to open a new thread?

cobrato said:
Don't anyhow report bugs. I have the first 3 work perfectly.
Camera is not even implemented
Click to expand...
Click to collapse
How you do it?, my market in v024 not work, fc always. I delete data of the market, and delete davkin of the market and also open five seconds, and return fc.

cobrato said:
Don't anyhow report bugs. I have the first 3 work perfectly.
Camera is not even implemented
Click to expand...
Click to collapse
You need to do a factory reset using xrecovery. The system will be jittery when you first start. Use adb shell then killall service manager then reboot then everything will be smooth
Sent from my X10i using XDA App

I did a quandrant benchmark. Result score is 1362. First place in device ranking.
Sent from my X10i using XDA App

Adding multi-touch as a module?

About Multi - touch
You can do multitouch driver as a module. This
kernel module to be unloaded from memory the old driver and load a new one. one person did it for the ebook.
Click to expand...
Click to collapse
Here's how to compile and add module:
http://forum.xda-developers.com/showpost.php?p=11854116&postcount=10
'andrej' has also added a sample from G1
any developer willing to help?

We need someone with knowledge in C, or give me touchscreen module sources for both X10 multitouch module and X8, and 2-3 weeks of time to try to make this work... I'd figure out differences between two modules and put mulitouch part to x8's module... I've had success in similar stuff already so why don't give it a try? We have nothing to lose... (except time, of course )

Will this work?

excellent! I'm in support for this

blagus said:
We need someone with knowledge in C, or give me touchscreen module sources for both X10 multitouch module and X8, and 2-3 weeks of time to try to make this work... I'd figure out differences between two modules and put mulitouch part to x8's module... I've had success in similar stuff already so why don't give it a try? We have nothing to lose... (except time, of course )
Click to expand...
Click to collapse
Cool. I'm no programmer but I'll try and get a developer to share the X10 module, and then you can perhaps give it a shot If a developer jumps onboard, it'll be brilliant ofc.
@Others
From what I've heard, this has been done and ought to work. Since you dont need to push a new kernel altogether, that step is bypassed.

If it worked, would it be implemented on official 2.1 only, or could it be ported to non-official roms too?

Graveir said:
If it worked, would it be implemented on official 2.1 only, or could it be ported to non-official roms too?
Click to expand...
Click to collapse
Its a bit premature to comment on that. First we need to get developers onboard. But once the kernel module is modded, it should work across all ROMs.

Relevant: http://en.wikipedia.org/wiki/Loadable_kernel_module
See the section for binary compability.
Sent from my X8 using XDA Premium App

oisteink said:
Relevant: http://en.wikipedia.org/wiki/Loadable_kernel_module
See the section for binary compability.
Sent from my X8 using XDA Premium App
Click to expand...
Click to collapse
it says
"In an attempt to combat those problems ,
symbol versioning data is placed within the
. m o d i n f o section of loadable ELF
modules . This versioning information can
be compared with that of the running
kernel before loading a module ; if the
versions are incompatible , the module will
not be loaded."
Maybe the module can be customized, and the symbol versioning data added, so that the kernel doesn't reject it?
Just a thought. Somebody has managed to.do this for another device. I'll try and get in touch with him.

Check out this thread. Here is where the discussion about such a possibility started:
http://forum.xda-developers.com/showthread.php?t=976948

[Q] 2.2.1 CM Floyo v0.20 (Pinch Zoom not working)

Hi guys, i need some help here.
I just installed 2.2.1 CM Floyo v0.20 updated by ratch, everything is fine but the features i was looking for is not working. The reason i root my fone is for me to use the pinch zoom coz i was so fascinated by it. I did a manual installation replacing the existing file but there's no luck for me either to work it out. How can i make pinch zoom work with ratch 2.2.1 CM Floyo v0.20 rom?
Thank you so much in advance guys..

Follow up question.
How would i know if my device uses Synaptics or Cypress digitizer?
Thanks

deedii said:
Follow up question.
How would i know if my device uses Synaptics or Cypress digitizer?
Thanks
Click to expand...
Click to collapse
type this on on terminal emulator/adb shell
Code:
dmesg | grep "cyttsp-i2c"
If you have something like this, that means your X8/X10mini is using Cypress and therefore it will not be supported by x8gesture:
Code:
<6>[ 4.185259] cyttsp_i2c_probe: Successful registration cyttsp-i2c

Oh thats quite disappointing coz it resulted something like that.. Is there anyway i could change it to Synaptics

LOL no this is your hardware xD but you are lucky you have cypress! Because its multitouch capable but synaptics not i have synaptics and x8 gesture works for me just wait till someone will make multitouch driver for cypress for our x8
Sent from my X8 using Tapatalk

Hi, I entered the code and nothing happened.
so, what did i do wrong???

zzsetozz said:
Hi, I entered the code and nothing happened.
so, what did i do wrong???
Click to expand...
Click to collapse
You need to :
1method. : reboot your phone and try again
2metod: type it without "" this method works for me and i have synaptics
Sent from my X8 using Tapatalk

Oh you mean it can do multitouch as well with proper driver in it? .way cool..
Im excited for that development..
Thank you. x0x0

deedii said:
Oh you mean it can do multitouch as well with proper driver in it? .way cool..
Im excited for that development..
Thank you. x0x0
Click to expand...
Click to collapse
No problem ask some other question if you want im few times a day on xda;]
Sent from my X8 using Tapatalk

One more thing i wanted to ask how can i make openvpn work on my new rooted x8 with ratch cutum rom. I read a lot of threads regarding it but it leads me with so much confusion.
Ratch floyo 0.25 is cyanogen mod right? so i have to follow this instructions only?
For cyanogenmod ONLY
install openvpn settings
go to sd card, and create a folder name it: openvpn
place the config files in the openvpn folder
open the openvpn application then choose Preferences
choose insmod --> tun --> then locate tun.ko ( /lib/modules/tun.ko)
tap the config file and wait for it to connect
connection sequence:
unknown => wait => auth => get config => add routes => 123.123.123.1 connected as 10.8.2.1 (ex. ip)
Reminder: you should get an ip value for "connected as". you won't be able to connect to the internet if the value is blank.
Click to expand...
Click to collapse
Or should i still do this.
1. Open Android Terminal Emulator and issue the following Commands: Type su first before niyo e.type yung command na nasa baba..
Code:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
busybox insmod /sdcard/openvpn/tun.ko
busybox cp /sdcard/openvpn/openvpn /system/xbin/openvpn
busybox cp /sdcard/openvpn/openvpn /system/xbin/tun.ko
chmod 700 /system/xbin/openvpn
mkdir /system/xbin/bb
busybox ln -s /system/bin/busybox /system/xbin/bb/ifconfig
busybox ln -s /system/bin/busybox /system/xbin/bb/route
busybox mount -o remount,rw /dev/block/mtdblock2 /system
busybox cp /sdcard/openvpn/chargemon /system/bin/chargemon
busybox cp /sdcard/openvpn/busybox /system/bin/busybox
reboot
2. Open VPN Settings and press Menu-->Advanced
3. Check the "Load tun Kernel module" checkbox
4. In TUN module settings select: insmod ; and the path to run module should be: /sdcard/openvpn/tun.ko
5. Path Configurations should be: /sdcard/openvpn
6. Path to openvpn binary should be: /system/xbin/openvpn
7. Back
8. Click on OpenVPN
9. Select freeopenvpn.ovpn
Click to expand...
Click to collapse
Im so confused so which is which??

deedii said:
One more thing i wanted to ask how can i make openvpn work on my new rooted x8 with ratch cutum rom. I read a lot of threads regarding it but it leads me with so much confusion.
Ratch floyo 0.25 is cyanogen mod right? so i have to follow this instructions only?
Or should i still do this.
Im so confused so which is which??
Click to expand...
Click to collapse
Yes floyo is cyanogen mod
I think you should follow the first method report back if it works
Sent from my X8 using Tapatalk

proadi96 said:
You need to :
1method. : reboot your phone and try again
2metod: type it without "" this method works for me and i have synaptics
Click to expand...
Click to collapse
thanks, it worked and i got this
<4>[ 2.490488] cyttsp_i2c: probe of 0-0024 failed with error -12
so i think i have synaptic, right???

zzsetozz said:
thanks, it worked and i got this
<4>[ 2.490488] cyttsp_i2c: probe of 0-0024 failed with error -12
so i think i have synaptic, right???
Click to expand...
Click to collapse
Yes you have synaptics like me
Sent from my X8 using Tapatalk

Hi proadi96, oh first thing i cannot try it coz i dont have tun.ko in my module, i search the net but there were no luck finding tun.ko for x8 running in froyo. I found one with the same kernel with mine but it is for eclair. I wonder if i could ask ratch to include tun.ko in his roms. I dont want to change rom coz his room is very stable for me.
Btw thanks much. x0x0

deedii said:
Hi proadi96, oh first thing i cannot try it coz i dont have tun.ko in my module, i search the net but there were no luck finding tun.ko for x8 running in froyo. I found one with the same kernel with mine but it is for eclair. I wonder if i could ask ratch to include tun.ko in his roms. I dont want to change rom coz his room is very stable for me.
Btw thanks much. x0x0
Click to expand...
Click to collapse
Well you can try to ask him hmmm maybe you need to search Google how to make tun.ko? i cant help you because i never heard about tun.ko;/ or ask racht or doixanh how to make this module? I dont know how much letters will be inside this module so i think you dont make one yourself ok ask racht to include this module and we will see what he write in reply
Hopefully i help you
Sent from my X8 using Tapatalk

My gps not working on floyo 0.20
My gps not working on floyo 0.20. Is there any solution for this problem? Because i like this rom. It´s most fast than floyo 0.25 and have more apps.

Oh i dont have any problem with my gps before in 0.20.. and i disagre with you 0.25 is more faster. x0x0

hey deedii
Did you find a tun.ko for Eclair??? I'm looking for one, I have found one in this "cooked" ROM xCyanogen Shakira gingerbread v3:
http://forum.xda-developers.com/showthread.php?t=1044876
Not sure if it would help you but may you please tell me where did you find the one for Eclair?
many thanks

FroyoBread F.A.Q.

Greetings. The following thread is related to FroyoBread ROM. I'm opening this thread since doixanh suggested it could come in handy. This is supposed to be helpful to all the people who don't know something or can't make something work. If you have issues - read the first post, if there is no answer - ask a question. Never the other way around. If you have a new (sensible) question I will add it to the first post along with a solution (by me or by anyone who can give it - by posting solutions you agree to my puting it into the first post).
This thread will be divided into three parts:
why this ROM?
installation instructions, tricks and issues
F.A.Q.
But first we need to make some things clear. These are as follows:
If you cannot comprehend what is written here - it's your problem, not mine. You can relate to THIS or THIS thread for information regarding things such as rooting, xrecovery and other stuff. Or learn English. I will not put things into plainer words, nor will I explain terms that are general, not ROM-related. "Hard" words will be marked in orange and google is your friend.
If you consider this guide useless - don't write in it.
This is a place for noobs. If you're an advanced user go straight to FroyoBread thread. Use this for questions, not for bug reports. Remember, doixanh is by no means obliged to visit this thread.
Ok, let's get down to business.
1. Why this ROM?
There are several reasons why you should go for this ROM, not for any else:
It's android 2.2 Froyo, which, while bootloader is still locked, runs smooth, and android 2.3 is buggy (mostly camera issues, but not only)
It's fast and contains very few bugs, which means it's good for daily use
It has lovely android 2.3 GingerBread features, such as crt animation, edge glow, and some more useful, like precise text markers. See for yourself
It's under constant development - new versions come even in three days distance
From v013 on you can use a wide variety of themes for CM7 devices!
Hope that it's enough to get your attention
2.1 Installation instructions and tricks
To properly install FroyoBread you need to have files which come with stock ROM build 2.1.1.A.0.6 or higher. You also need baseband ending with 015. You will require xRecovery to for installation. Clockworkmod recovery, for now, does not allow to install FroyoBread!
Do you have all that's needed? Good, let's get started!
Put a downloaded FroyoBread zip in the root of your SD card
Go into xRecovery
Make a backup of your current ROM in case you want to go back!
After backing up choose "install custom zip" -> "choose custom zip from sdcard" -> choose your froyobread zip file and install it. It will take a short while.
NOTE: Every FroyoBread installation file will wipe your cache partition, you don't have to do it manually. All the versions except for RC0 will preserve your data partition, so if you are updating your FroyoBread you will not loose your contacts, apps and so on.
If you are coming from any version of android that is not 2.2 - make a full wipe (factory reset). This step is not necessary for ROMs such as Floyo, Elelinux or miniCM, but it is generally good to get rid of other ROM's data before proceeding.
You may want to go to "advanced option" and wipe battery stats to get more precise readings, but it is entirely optional.
Reboot!
Now, there are some additional files you may want to install. These are themes and fixes. They are installed the very same way the ROM is, but they do not wipe anything, nor do they need you to perform any action apart from choosing them for installation and then rebooting. The list of themes and fixes can be found in FroyoBread thread.
2.2 Installation issues
Something went wrong? Phone doesn't turn on? No worries
Issue: my phone shows only the "Sony Ericsson" logo and doesn't move on!
Solution: take out your battery, put it back and get into xRecovery once more, perform full wipe. You may also want to reinstall the FroyoBread zip. If something weird happens during the installation (for example the progress bar goes only half way) redownload the ROM, go into "partition options" of xRecovery and mount USB to replace the zip, then install it again. If anything else fails, you can always restore your previously done backup of the old ROM. You made it, didn't you?
Issue: I cannot see anything on my notification bar!
Solution: Reboot your device and check settings->CM settings -> user interface -> tweak extras -> select a theme. You should have STOCK_Black enabled by default.
Issue: I instaleld a theme and <something> is not working!
Solution: Do you really need that thing that has been broken? If so, reinstall your current version of the ROM, or perform an advanced restore of your system (if you have a proper backup of course)
Issue: my GPS/radio/data/whatever is not working!
Solution: GPS works. If you have issues - full wipe. Some apps may not be compatible with FroyoBread - in this case report a bug Radio has been fixed in v007, but due to some major changes it could be broken in further versions. I have never checked it. Some themes may also cause radio to break. Data traffic, yes... it has been reported that sometimes it simply breaks and there is nothing to be done, only wifi works. Bug reported, be patient. Anything else is not working? Post a question and we will try to help
F.A.Q.
Q: Is this ROM better than others?
A: In some respects it is. See section one of this guide, or try the ROM yourself
Q: What is baseband/build/xrecovery/etc?
A: At the very beginning I put two reference links to hub threads which will direct you to the knowledge you desire
Q: How to install this?
A: You didn't read the installation instruction, did you?
Q: I have v013 beta(2), why doesn't my notification bar change when I switch themes?
A: doixanh is working on separating notification bar from the system, but in this version of ROM it doesn't work. Wait patiently
Q: Is wifi-N enabled in this ROM?
A: It was up to v012. In v013 doixanh disabled it due to stability issues. Refer to changelog for further versions.
Q: Why are CM settings in English?
A: CM6 settings were never truly translated. Maybe doixanh will include CM7 translations in further releases, but for now you need to wait or translate the xml files yourself (if you know how to extract them from .apk - knowledge is here, on XDA )
Q: Is "beta" unstable?
A: Beta version of v013 is stable enough for daily use. It has been called so due to major changes and for fear of many bugs to come. doixanh simply didn't want people to complain that the "stable" build is unstable.
Q: Can this brick my device?
A: If you do something wrong you may, of course, crash your system. There is, however, now way to brick it permanently, since bootloader is locked. For unbricking see my other guide HERE.
Q: I did all the steps from installation part, I have a proper build and baseband and yet my phone is stuck on boot with SE logo. What's wrong?
A: Did you do a full wipe? If so, then there is something wrong with you file system. Reflash the phone with 2.1.1 tft file from THIS guide, make sure you have 015 baseband and then reinstall FroyoBread. Make sure to backup your data!
Q: I cannot use SE backup and restore app!
A: Well, that's most probably because doixanh named the brand Sh!t Ericsson instead of Sony Ericsson. Change this value in build.prop and try to install again. build.prop may be found in /system and /system/bin, you need to change both, then reboot. If all else fails you may always use MyBackup and Titanium Backup from the market
Q: What modules are included?
A: By default we have x8uv, x8mddi and x8gesture in system/lib/modules. If you want x8oc simply put the .ko file in the directory and reboot, FroyoBread is designed to load this module without any further modifications in config.sh.
Q: How do I add more themes to theme chooser?
A: Go to THIS thread and choose to your liking. Some themes are available through market, some need to be downloaded from XDA and installed through file managers.
This list is to be expanded by your further questions!

Mod Edit: Ok, just deleted the quote.
Omg! That's best thread I ever see! But anyway I'm not noob I know everything what's here but its very good for noobs! Well Done! BTW I'm using froyobread v013 and its very stable
Sent from my X8 using Tapatalk

Actually I have some question how to put some new themes to theme chooser? Because there is only 3... now I'm using blue framework for this Rom and its beautiful
Sent from my X8 using Tapatalk

proadi96 said:
Actually I have some question how to put some new themes to theme chooser? Because there is only 3... now I'm using blue framework for this Rom and its beautiful
Sent from my X8 using Tapatalk
Click to expand...
Click to collapse
You either download some CM7 themes from the market or from XDA. The list is here: http://forum.xda-developers.com/showthread.php?t=1056292
Gonna add this to the FAQ in the first post

Graveir said:
You either download some CM7 themes from the market or from XDA. The list is here: http://forum.xda-developers.com/showthread.php?t=1056292
Gonna add this to the FAQ in the first post
Click to expand...
Click to collapse
Ok i will try it thanks dzięki ziom xD
Sent from my X8 using Tapatalk

What themes do you recommend?
Wysłałem z mojej zajebistej x8 za użyciem tapatalk! ROM froyobread v013 !

I haven't tried any of those yet, but I intend to use Sith with all addons as soon as I have time to theme my GO launcher Ex properly

Graveir said:
I haven't tried any of those yet, but I intend to use Sith with all addons as soon as I have time to theme my GO launcher Ex properly
Click to expand...
Click to collapse
All right i will try it thanks man
Wysłałem z mojej zajebistej x8 za użyciem tapatalk! ROM froyobread v013 !

hello guys..
really happy to see this thread here.. thanks to dx n all devs supporting here...
im using this, frm v6 n i really love it... v14 is stable for me... awesome performance..
how do i change the power icon in notification bar, i wud like to have GB default instead of cirlce ... sorry for my request.. pls do consider n help me,...
once again thanks to dx for this wonderful rom.. n also Achep for his theme...

you want x8oc simply put the .ko file in the directory and reboot
I can't find this file...on v14.

Since you made the F.A.Q. I'll ask you the same question I've asked on the dev thread. Is Bluetooth working for you ? Because I can only use it with a 3rd party app from the market, and is annoying as hell.

hey i just got this problem.. im unable to update google maps, downloads completely but after dat installation fails.. pop up displays update package failure.... flashed v12 freshly same error occured again.. pls help me..
n i also noticed that there are no events in notification dropdown menu while der is a download running frm market, it only appears during installation....

Yeeei, i overclocked my Xperia X8, thanks for your guide.

sathish087 said:
hello guys..
really happy to see this thread here.. thanks to dx n all devs supporting here...
im using this, frm v6 n i really love it... v14 is stable for me... awesome performance..
how do i change the power icon in notification bar, i wud like to have GB default instead of cirlce ... sorry for my request.. pls do consider n help me,...
once again thanks to dx for this wonderful rom.. n also Achep for his theme...
Click to expand...
Click to collapse
You can either change it in framework-res.apk (you'll need default icons and xmls for that, for more see the general theming section of XDA) or use another CM7 theme (in v014 you will experience issues such as battery indicator flipping from stock to themed randomly - wait for more updates for a fix )
Since it is not an easy thing to fix I will not put in into a F.A.Q. this time
CaptainZap said:
Since you made the F.A.Q. I'll ask you the same question I've asked on the dev thread. Is Bluetooth working for you ? Because I can only use it with a 3rd party app from the market, and is annoying as hell.
Click to expand...
Click to collapse
Well, last time I used bluetooth it was on v013b. Both astro bluetooth and bluetooth file manager DIDN'T work for me, I had to send a file (mp3) through default android service actually. I will check it on v014 in the morning and write something more
sathish087 said:
hey i just got this problem.. im unable to update google maps, downloads completely but after dat installation fails.. pop up displays update package failure.... flashed v12 freshly same error occured again.. pls help me..
n i also noticed that there are no events in notification dropdown menu while der is a download running frm market, it only appears during installation....
Click to expand...
Click to collapse
The solution's been found by one of the users. Here - PM this person for more information. If you repost it here I will gladly put in into F.A.Q. I cannot help you since I do not use Maps
As for download event not showing - it is a bug that has been already reported We may only hope that it will be fixed in v015
LegoGabi said:
Yeeei, i overclocked my Xperia X8, thanks for your guide.
Click to expand...
Click to collapse
I will disregard your previous post then Have fun

Dx is using this version of map. This version enables navigation in countrys that don't have it original. You can not update it in market.You need to completly uninstall maps and then install from market, if you want the newest version. Thanks for your FAQ post Gravier

hi, i've been asking this question since v12.
is there anyway to incude tun module in the release? if yes? how can i insert it manually?
i've tried copying the tun module from minicm6-1.0.2 to froyobread but it doesnt work.
thanks
\

question: always come across "FC" term, what does it stand for? eg.
"Fixed black screen bugs and FCs in YouTube, Video Recorder and Video Player...."

wantutri said:
hi, i've been asking this question since v12.
is there anyway to incude tun module in the release? if yes? how can i insert it manually?
i've tried copying the tun module from minicm6-1.0.2 to froyobread but it doesnt work.
thanks
\
Click to expand...
Click to collapse
Could you please attach this module to the post or upload it to mediafire? I'll try to find the solution for you And tell me what is it supposed to do, otherwise I may not know if it's working for me or not
yinhaoliew said:
question: always come across "FC" term, what does it stand for? eg.
"Fixed black screen bugs and FCs in YouTube, Video Recorder and Video Player...."
Click to expand...
Click to collapse
Force Close.

Got X8 few days ago, and installed froyobread. My X8 runs surprisingly smooth, with few glitches:
1. Video recording isnt working, is there any chance of enabling it? (when i press record it shuts down app)
2. Sluggish keyboard
3. auto brightness bugs - First its ok, than it ajusts brigness after 5 seconds or so, than refuses to enlight screen

1. It should be ok in v015. If it isn't - try full wipe. If it doesn't help - report bug in doixanh's thread.
2. Which one are you referring to? As far as I remember we have HTCime mod and stock android keyboard. If both don't suit you - try some keyboards from the market
3. Well, autobrightness is still enlisted as a persisting bug in doixanh's thread, so I'd suggest you disabling it. If you'd like to keep some controll over brightness you may set a drop-down widget in CM settings

Is there a way we can fix atmel touchscreen drivers for 2.3.5 official?

As the title says, thats the only thing holding me back and not upgrade to 2.3.5 official. So can any dev fix this or use froyo drivers for atmel? Cause i dont think huawei is going to fix this.

I'm not a kernel dev, so I can't help. The fix would be to extract touchscreen driver from 2.6.32 kernel and put it in 2.6.35 kernel.

Blefish said:
I'm not a kernel dev, so I can't help. The fix would be to extract touchscreen driver from 2.6.32 kernel and put it in 2.6.35 kernel.
Click to expand...
Click to collapse
sounds to easy..

i would like to know this solution to.

How do you know if you have a atmel screen?

Download elixir 2 apk from market. Start apk, go to information, then input devices. You will find it there.
Sent from my u8800

I'm not happy with the Synaptics driver though... It's "jumpy" when i scroll at a low speed...
So, a kernel dev could fix these issues? That sound awesome New hope ^^

blueberetdb5 said:
I'm not happy with the Synaptics driver though... It's "jumpy" when i scroll at a low speed...
So, a kernel dev could fix these issues? That sound awesome New hope ^^
Click to expand...
Click to collapse
There's a firmware update released at 2011-12-28 for U8800+ Synaptics touchscreen, the offcial staff/moderator said there're no side effect to apply this update on U8800, official thread: http://bbs.huaweidevice.com/cn/forum/index.php?app=forum&mod=Detail&act=index&id=34559 (chinese language, need register to download)
目的：修正U8800+ 触摸屏卡顿问题
适用范围：仅适用U8800+
升级前请仔细阅读《U8800+触摸屏固件升级指导》
升级方法：
1.1 准备一张SD卡，剩余空间至少50M，同时确保手机电池电量剩余50%以上;
1.2 在SD卡根目录下建立一个文件夹，命名为update;
1.3 将synaptics.img复制到update目录下；
1.4 手机关机，将SD卡插入手机SD卡槽；
1.5 同时按住音量上键和电源键不放，直到进入Recovery模式，选择“touchscreen firmware update"
（Recovery模式下音量键可以用来选择，电源键可以用来确认选择）
1.6 升级成功后，重起手机即OK.
升级中可能出现的异常情况：无法找到SD卡或找不到升级文件，检查下SD卡工作状态及目标文件存储位置是否符合要求。
如果升级过程中 出现 E:update failed" 说明您的手机不需要升级该 firmware,选择“reboot system now” 按电源键重新启动手机即可；
Click to expand...
Click to collapse
brief translation:
fixed: 'laggy' issue of U8800+ touchscreen
applied: to U8800+ only
steps:
1. prepared a SD card with at least 50M remaining spaces, make sure battery capacity have 50%+
2. make an "update" directory under the root of SD card
3. copy synaptics.img to that "update" directory
4. power off, and put SD card to phone
5. hold Vol+ and power button to boot into recovery mode, choose "touchscreen firmware update"
6. after update done, reboot
if you got "E:update failed" error message, it means your phone need not update, just choose “reboot system now”

Can you apply this update to both .32 & .35 kernels?

Sorry, I can't confirm it, no official document about this, most people use Android 2.3 to update this, but I saw few people apply on Android 2.2. ( see #58 reply of this feedback thread: http://bbs.huaweidevice.com/cn/forum/index.php?app=forum&mod=detail&act=index&id=34637&p=3 ). My phone does not have 'laggy' issue, I didn't apply this update, I just reply blueberetdb5's question for his Synaptics touchscreen.

So this can't be use for the atmel thouch?
Sent from my Huawei Ideos X5 using XDA App

why this topic got flooded by synaptic messages?

haha it works
Sent from my u8800 using xda premium

It works on what? Atmel touch? What problems you had before?
Sent from my Huawei Ideos X5 using XDA App

alex1301 said:
haha it works
Sent from my u8800 using xda premium
Click to expand...
Click to collapse
what works?

it works on synaptics the update. i had a laggy touchscreen before with actions every 5 pixels
Sent from my u8800 using xda premium

This thread is about the atmel touchscreen guys just read the title.

I try to use this update on the atmel thouch and is said to me error so it has any effect on my phone , still with frezzes and glitches this clip can show what happens in my phone after install a clean 2.3.5 version on a atmel touch. its not my phone but the problems are the same that in this droid on the youtube. http://www.youtube.com/watch?v=TT0CkZVHlXU
Sent from my Huawei Ideos X5 using XDA App

Blefish said:
I'm not a kernel dev, so I can't help. The fix would be to extract touchscreen driver from 2.6.32 kernel and put it in 2.6.35 kernel.
Click to expand...
Click to collapse
Does anyone tried this solution?

Can any dev fix the problem with the atmel touch drivers or at least tell us if its possible to use the froyo drivers which worked fine with atmel.