Hello everyone,
(Note, I did do a nandroid backup before I did ANYTHING, right after rooting)
I was having some issues with Modaco 1.0 when it was first put out, and like everyone else, got trapped in a reboot loop. Once I saw that the fix was repartitioning to FAT32, I did so, re-flashed the ROM, and I was back in. All was good.
But when 1.1 came out, I really wanted to restore to my backup to start fresh with the new ROM, but it did not work out. When I tried to do so in the recovery console, I got this error - Error: "nandroid-mobile.sh restore" from console! -
What am I supposed to do with that? I went ahead and went through with 1.1, but I am worried I accidentally closed my backdoor at some point. I noticed I lost some things from the basic ROM (such as the default wallpapers, and I had issues with Google Maps), and I am just generally worried something is fishy in there.
Any suggestions?
lorsoblu said:
Hello everyone,
(Note, I did do a nandroid backup before I did ANYTHING, right after rooting)
I was having some issues with Modaco 1.0 when it was first put out, and like everyone else, got trapped in a reboot loop. Once I saw that the fix was repartitioning to FAT32, I did so, re-flashed the ROM, and I was back in. All was good.
But when 1.1 came out, I really wanted to restore to my backup to start fresh with the new ROM, but it did not work out. When I tried to do so in the recovery console, I got this error - Error: "nandroid-mobile.sh restore" from console! -
What am I supposed to do with that? I went ahead and went through with 1.1, but I am worried I accidentally closed my backdoor at some point. I noticed I lost some things from the basic ROM (such as the default wallpapers, and I had issues with Google Maps), and I am just generally worried something is fishy in there.
Any suggestions?
Click to expand...
Click to collapse
Your Nandroid backup was on that SDcard...I don't suppose you saved it before formatting it?
lorsoblu said:
Hello everyone,
(Note, I did do a nandroid backup before I did ANYTHING, right after rooting)
I was having some issues with Modaco 1.0 when it was first put out, and like everyone else, got trapped in a reboot loop. Once I saw that the fix was repartitioning to FAT32, I did so, re-flashed the ROM, and I was back in. All was good.
But when 1.1 came out, I really wanted to restore to my backup to start fresh with the new ROM, but it did not work out. When I tried to do so in the recovery console, I got this error - Error: "nandroid-mobile.sh restore" from console! -
What am I supposed to do with that? I went ahead and went through with 1.1, but I am worried I accidentally closed my backdoor at some point. I noticed I lost some things from the basic ROM (such as the default wallpapers, and I had issues with Google Maps), and I am just generally worried something is fishy in there.
Any suggestions?
Click to expand...
Click to collapse
nah. The happens sometimes. Could be your nandroid backup got corrupted or you are low on battery power. Two most common causes. I would make sure the nandroid backup is on the sd card. if so, simply try plugging it in to a power supply. Let us know if you get it working.
All right... I did not want to admit it but I believe what you said is probably true, and I either corrupted or simply deleted the nandroid backup during all the flashing and repartitioning. I am not seeing it at all when I mount the SD card. It crossed my mind a little too late that I should have pulled it off the card.
What are my options here? On the one hand, it is working fine for now. I had just got the Hero earlier that day (did an exchange due to dead pixels and network issues), so it was not like I lost anything important. Is there an easy way for me to go all the way back, such as flashing the original ROM to the phone, and essentially starting over, like I just opened the box and turned the phone on? That way I can do it right from the very beginning. I just worry that in all my partitioning things got scrambled, and I am not seeing the repercussions from it yet, other than Google Maps.
ftp://xda:[email protected]_Hero_C_Sprint_1.29.651.1_signed_release.exe
if at first you try and fail.... try try agian
Thanks for the link.
Is there some process to this? I mean, I understand the whole update.zip concept of flashing the ROM, but would I also need to do a complete wipe of the SD card to achieve the fresh start I am looking for? Should I partition it at only FAT32, or go ahead and setup the ext2 partition before flashing the original ROM?
lorsoblu said:
Thanks for the link.
Is there some process to this? I mean, I understand the whole update.zip concept of flashing the ROM, but would I also need to do a complete wipe of the SD card to achieve the fresh start I am looking for? Should I partition it at only FAT32, or go ahead and setup the ext2 partition before flashing the original ROM?
Click to expand...
Click to collapse
convert sd card to "SDPART:fat32 only" from custom recovery
et the official RUU wipe your phone
enable USB debugging in settings>applications
reroot your phone using asroot exploit
make any partition changes you want
do a nandroid backup
do a nandroid restore to verify it works
backup on your workstation /sdcard/nandroid
DO NOT TOUCH YOUR SD PARTITION TYPE AT THIS POINT
get to modding in confidence
johnsongrantr said:
convert sd card to "SDPART:fat32 only" from custom recovery
et the official RUU wipe your phone
enable USB debugging in settings>applications
reroot your phone using asroot exploit
make any partition changes you want
do a nandroid backup
do a nandroid restore to verify it works
backup on your workstation /sdcard/nandroid
DO NOT TOUCH YOUR SD PARTITION TYPE AT THIS POINT
get to modding in confidence
Click to expand...
Click to collapse
All right, I am having issues already, from the very beginning.
The RUU ROM .exe will not recognize the HTC Hero. It throws an error 170 at the step where it is trying to pull information from the phone. I think this has something to do with ADB, and the fact the computer did not have the SDK on it. (I originally set up the root with my Mac.)
So, where do I go? I have a Boot Camp partition and another computer both running Windows 7, but my attempts to put the SDK on those computers and then have the phone drivers properly recognized failed on both, and the .exe still cannot complete. Is there something I am missing here, or can I somehow do this on the Mac side? I'll take anything!
Edit: Just cause I can see someone asking, yes, I tried to do this on both of my Windows 7 computers, not the Mac. I recognized that the .exe would not run on OSX pretty quickly.
can you put your phone into fastboot (power+vol down) and get to the point where windows basically sees your phone
what you are looking for is when you type adb devices it shows your hero
fastboot might not work because it's a seperate program but try custom recovery main menu.... enable usb.... or something to that extent
I appologize I don't have my main computer in front of me so I can't tell you EXACTLY where to go
once I do, I'll find which one to hit.... it does work though because I had to do the same thing with my godly preaching of backups :blush:
it's one of the recovery areas though i promise
fastboot will see the hero as the same device as adb will in fastboot
adb will see the hero as recovery device in custom recovery
attempt both of these I'm certain one of these work
if absolutely all else fails.... after you "install" sprint ruu search your computer for rom.zip it should be in your START>RUN>%TEMP% in here somewhere
rename rom.zip it to HERCIMG.ZIP and put it at root of your sd card and boot into hboot and it should automatically find it and press action to flash it
I'll give some of that a shot. I can confirm that adb devices was not showing the hero connected cause I tested that, so I have a feeling correcting that is my primary concern. What happened when I connected the Hero the first time was that it applied the drivers, but it could not find the ADB one, even after I added the SDK. So if anyone knows what that means (Windows 7 doesn't really give you an easy way to point and say, "Hey, I know what you are looking for, it's right here!" apparently, at least I haven't found it) it would be appreciated.
lorsoblu said:
I'll give some of that a shot. I can confirm that adb devices was not showing the hero connected cause I tested that, so I have a feeling correcting that is my primary concern. What happened when I connected the Hero the first time was that it applied the drivers, but it could not find the ADB one, even after I added the SDK. So if anyone knows what that means (Windows 7 doesn't really give you an easy way to point and say, "Hey, I know what you are looking for, it's right here!" apparently, at least I haven't found it) it would be appreciated.
Click to expand...
Click to collapse
go to htc's website and get htc sync under support>sprint hero it has the drivers built in.... should fix driver issue
johnsongrantr said:
go to htc's website and get htc sync under support>sprint hero it has the drivers built in.... should fix driver issue
Click to expand...
Click to collapse
Hey, that did the trick! Currently flashing with the official ROM right now. Thanks for all the help! FINALLY, I will get to do this right!
lorsoblu said:
Hey, that did the trick! Currently flashing with the official ROM right now. Thanks for all the help! FINALLY, I will get to do this right!
Click to expand...
Click to collapse
glad to be of assistance
johnsongrantr said:
glad to be of assistance
Click to expand...
Click to collapse
Actually, I do have one more question.
Following your instructions back on page 1, wouldn't I want to make the nandroid backup BEFORE repartition to fat32+ext2, so I could recover it all the way back to the standard ROM without partition alterations? Or is it necessary for me to repartition before creating a backup?
lorsoblu said:
Actually, I do have one more question.
Following your instructions back on page 1, wouldn't I want to make the nandroid backup BEFORE repartition to fat32+ext2, so I could recover it all the way back to the standard ROM without partition alterations? Or is it necessary for me to repartition before creating a backup?
Click to expand...
Click to collapse
you'd think so.... but from my own experience if you do a backup on a partititon then convert it... it screws with the backup and you can't recover from it.... just in case... do 2 backups.... store the normal fat32 nandroid backup on your workstation (the entire nanddroid folder) and copy it back to sd after you convert it to fat32+ext2 .... you'll see what I'm talking about....
I don't quite understand why it does that... but for me I was only successful in recovering from a partition that I made a backup to not copied to (if that makes any sence)
also if you don't want to experiement yet... just leave it fat32... you can always change it later after you see it working (sorta confidence builder before tinkering)
lorsoblu said:
Actually, I do have one more question.
Following your instructions back on page 1, wouldn't I want to make the nandroid backup BEFORE repartition to fat32+ext2, so I could recover it all the way back to the standard ROM without partition alterations? Or is it necessary for me to repartition before creating a backup?
Click to expand...
Click to collapse
Think about it this way, you do a nandroid backup...it places it on the sdcard.
Then you go and change the format of the sd card (potentially blowing away or corrupting any data on it, including the nandroid backup you just made).
Thus why it's better to do it afterwards (besides, nandroid doesn't back up your sd card, just your phone's OS and such)
solved for me
i had that problem its cuz the back up is brocken get anthoer copy of it if u hav 1 then restore it again it worked for me
I have been working on this for the past few days and for the life of me cannot figure out the problem. I'll start by just laying out a sequence of events.
Bought A500 about a month ago. OTA'd to HC 3.1 4.010.13_com_gen2
Decided not to wait for OTA 3.2 and rooted with iconiabreak.
Did not do a backup (like an idiot, i know)
Flashed Taboonay 2.0 with Thor's 2.1 kernal.
Saw awesome post to get rid of cell standby by deleting phone.apk and telephony.apk....do i did that.
Realize i am an idiot and then run a Nandroid backup.
Was happy for a few weeks when i see that Vache had updated taboonay to 2.1b and decided i wanted to do that.
Downloaded the files and started to flash with CWM. Factory, cache, dalvik wipe. Run Taboonay zip.
Get stuck in bootloop at Taboonay boot screen. $#!t......
Think "it's ok, ill just do an update.zip and go back to 3.1"
Try almost all the files on Vache's full package and update thread.
I put each one on an ext sd card and throw it into recovery boot. The Android guy with gears shows up and it looks like it is going to work.
The progress bar gets about 90-95% of the way when everything just stops. Gears animation, progress, everything.
It then reboots and gets stuck in a bootloop at the android screen. Load a different update.zip and same thing happens each time.
I try to just do a normal recovery boot, but CWM isnt there anymore and i get the ! android.
Normal reboot gives me a bootloop.
So i am stuck and asking if it is the phone and telephony apks that caused everything? if that were the case, how would i be able to load them back up since im totally locked out. I havent tried adb since im out of town for a few days. Thanks for any help that anyone can lend me. Ill try to answer any questions for any information that might be needed.
bumping for great justice~
I've tried decrypting update.zip files and vice versa.
still no luck..
try the fall back to 3.0.1
Check under development section for iconia a500. You'll see a thread for going from 3.2 to 3.0.1.
As i readd about this rom, it seems it's used in difficult cases (it removes the locks created by 3.2 stock), so it could be worth giving it a try.
rorohajj said:
Check under development section for iconia a500. You'll see a thread for going from 3.2 to 3.0.1.
As i readd about this rom, it seems it's used in difficult cases (it removes the locks created by 3.2 stock), so it could be worth giving it a try.
Click to expand...
Click to collapse
Thanks for the reply.
I don't think that will be a viable option for me since i'm not able to get my UID. i've plugged my tablet into the computer and gotten the "hardware found" bubble. It prompts me to look for drivers (which i havent be able to find) and, i assume because it's in a bootloop, wont show up on the computer.
Does anyone know why the update.zip files would fail at 90%? I think that's really the thing that boggles my mind and is most frustrating.
Did you at all have your A500 connected to your computer prior to this happening? If so then you can get the UID from by way of the Windows registry. Then you should contact SC2K and get him your UID he should be able to help you get your A500 back from the dead.
jeffw111 said:
Did you at all have your A500 connected to your computer prior to this happening? If so then you can get the UID from by way of the Windows registry. Then you should contact SC2K and get him your UID he should be able to help you get your A500 back from the dead.
Click to expand...
Click to collapse
Unfortunately, no I never plugged my A500 into my computer.
quick update:
I was able to use a different computer and found something interesting.
While trying to transfer or open a decrypted update.zip file, i get an error message saying, "Please insert the last disk of the Multi-Volume set and click OK to continue". Clicking OK just brings it back and i am forced to click cancel.
Anyone have any idea what that would mean??? It doesnt happen when I open or transfer the non-decrypted file. Only the decrypted file using Thor's Acer Update Decrypter application on HC 3.1 and 3.2 files.
While loading the decrypted update.zip on the A500, it almost instantly shows the ! android guy, while the non-decrypted files go 90-95% and then reboot into bootloop.
Any help would be greatly appreciated!
first off if you can get into recovery to flash anything.You are not bricked.
Take your SD card put in a android phone format it.
Put the card in your computer.copy a full update.zip file from dev section.likes on a post by Thor.put card.back in tab and flash.
If it stall fails repeat with a different SD card.seems smaller ones do best.
Good luck.
erica_renee said:
first off if you can get into recovery to flash anything.You are not bricked.
Take your SD card put in a android phone format it.
Put the card in your computer.copy a full update.zip file from dev section.likes on a post by Thor.put card.back in tab and flash.
If it stall fails repeat with a different SD card.seems smaller ones do best.
Good luck.
Click to expand...
Click to collapse
Thanks for your reply, first off.
I'm sorry I didn't make it clear that I had done all of those things during the events of the first post EXCEPT try a different sd card.
So I went out today and bought a PNY 2GB sd card as opposed to the SanDisk 4GB i was using. I formatted it in my Atrix 4G and threw a full update.zip file in there. The first file I tried (from Vache's http://forum.xda-developers.com/showthread.php?t=1113878 thread) was Acer_A500_4.010.38_COM_GEN1 (HC 3.1). Since I was able to open the .zip without decrypting it I loaded it only the sd card. It did the same thing as before (loaded to about 90% then freeze, reboot) except this time I got a "Boot verification failed..." message in bright red letters up at the top left of the Acer screen. Since it didn't work, I loaded Acer_A500_7.006.03_COM_GEN2 (HC 3.2) onto the sd card. Again, since I was able to open the .zip file, I assumed that there was no need to decrypt it. Loaded the sd card and put the tablet into default recovery (not CWM recovery which I no longer have). The same problem keeps happening: it loads to 90%, freezes then reboots. This time, however, it went into a bootloop at the "android" screen.
I've tried decrypted versions of those files, but I always get an error message while trying to open them and when trying to flash them in default recovery, it almost instantly goes to the ! android guy since I'm assuming those files are already decrypted and decrypting them again is bad.
Hopefully if I try enough files, I'll find the one that works...
Until then, if anyone has any ideas as to what I might be doing wrong or should be doing differently, please let me know!
Thanks.
there is a thread that has instructions on going from the OTA 3.2 to downgrade. To 3.1.look for that tthread and windows software. On that thread it talks about that error your getting.
Since I have not had this issue .can't say for sure if it will help.
Good luck sorry I can not do more to hhelp
Just a dingy blonde here.
erica_renee said:
there is a thread that has instructions on going from the OTA 3.2 to downgrade. To 3.1.look for that tthread and windows software. On that thread it talks about that error your getting.
Since I have not had this issue .can't say for sure if it will help.
Good luck sorry I can not do more to hhelp
Just a dingy blonde here.
Click to expand...
Click to collapse
Thanks for your suggestion.
I was able to find my UID from an old CWM backup file and tried this method. I attempted it last night with no success. I was actually in the middle of making a reply saying how heartbroken I was and that I was basically giving up. I decided to try it one more time and made a slight adjustment from my method last night. In the UID file, I had my UID in there as 0x0blahblahblah and kept getting the incorrect UID error in the program. When I tried taking out the first 0x in the program, it gave me an incorrect format error. That is where I was messing up.
Instead of 0x0, all i needed was 0blahblahblah in the UID file.
Attempted the upgrade utility again, and viola! It worked like a champ.
So thanks again to all that helped out and offered suggestions and to all the Devs for their outstanding work. I've definitely learned a lot from this experience.
OK, I've come into a roadblock and have searched the forums and google... But to no avail.
I bought a refurbed Nook, and it came with V1.2 firmware.
I ended up downgrading to 1.0.1 (by accident, I had meant to downgrade to 1.1) and then ran the auto nooter (for 1.1). Some reason, it worked. I then installed CM7. It seems to have installed a seperate Bootloader or Recover (im not sure maybe both). Problem is, I dont have root (or at least, I dont have SU permissions. not matter wether I run CM7 (WHEN it actually boots) from the NC itself, OR when in Honeycomb via booting it from the SD card.
I have searched and searched how to get the NC back to stock to try to start over, but I cant seem to do anything right on this machine.
When I boot into CWM (From SD Card) to try and format system/data, it locks up and seems to not have been successful... When I try to reinstall CM7, it boots with the big android (like a rooted stock FW). When I try to install CWM from a honeycomb run from the SD card, it kicks back with no superuser permission to run the install (Rom Manager loads correctly, but doesnt get SU perms).
When I try to boot into CM7 then reboot into recover, it locks up on "Booting into recovery"
can SOMEONE help out?
Found V1.2 firmware:
http://www.mediafire.com/?a1lg5w8thbbkp9t#1
(Wanted to do a strikethrough on previous note, but unsure how...
Figured it out...
Had an old version of CWM (I was on 3.0.0.5, needed 3.2.0.1)...
Rebuilt NC by formatting Data/System folders, then incrementally updating from 1.0.1 to 1.1 to 1.2 to 1.3.. Had to piece together a bunch of different tutorials and forum posts.
Looks like the problem I encountered was starting with a newer version of CWM to try to root, then switching to an older version which was causing me to be unable to properly format my /DATA folder which kept carrying bad info from one install to the next... SO FAR, SO GOOD...
HOPEFULLY, my mistakes will help someone in the future.. I'm going to go back and look for links to all the stuff (or maybe I'll just post dropbox links and host the items myself)
Hi,
First of all, sorry about my english. It's not my primary language.
I recently bought a used Nook Simple Touch on eBay. The previous owner had tried to root it, but failed somewhere along the way. I got it dirt cheap and figured I could fix it..
I've read "all" the unbricking guides here on the forum, but I'm yet to make it start. I can boot CWM, but for some reason noogie is not starting at all.
At first, the device said "Rooted forever" all the time, but after some messing around in CWM it's instead displaying "Your NOOK is starting up..." in five different languages, and stops there.
The thing is, I'm not even interested in the reading features (B&N apps, e-books, etc.), I just want to use the device to display a status webpage that I've made (weather updates, bus/subway/tram departures, etc. etc.), so as long as it can run Chrome or similar I would be perfectly happy! Is there a vanilla android ROM available so I don't need to care about the "device specific" data that I've been reading about (the one you're supposed to take a backup of)? Or can I just flash it with any NST firmware if I'm not interested in the reading functionality?
Thanks!
Have you tried Nook Manager? I've had really good luck with it and it includes a factory image reset. It may be a way to get back to something you can work with.
nmyshkin said:
Have you tried Nook Manager? I've had really good luck with it and it includes a factory image reset. It may be a way to get back to something you can work with.
Click to expand...
Click to collapse
I agree. I just received my nook from ebay a couple of days ago. I've tried a number of different root methods and google apps installers. Nook Manager + NTGApps was by far the simplest for me.
Also, have you tried the stock factory reset?? I'm new to this, so I'm not sure if it will work -- but I thought I bricked mine 3-4 times and the factory reset saved me every time.
0) Take out any SD cards (just making sure you don't have anything bootable on the card)
1) Press and hold the power button until it resets
2) As soon as it begins to reboot press and hold the bottom left and bottom right physical buttons until you see a prompt.
3) Wait for the prompt and press the "n" button once to confirm the factory reset
4) Press the "n" button again to begin the factory reset again.
After you factory reset, upgrade to 1.2.1 and then root using Nook Manager. Then, you'll have the browser available to you.
* Use Nook Manager to make a backup *
Thanks for the suggestions you guys! I finally got it to work!
Noogie finally booted up. I just left the nook, with the noogie sd card in, connected to my computer when I went to work. When I got home, it had started. Since then it started every reboot. No idea why it didn't work in the beginning?
Alright, this is how I did. This information is scattered around the forum already, but hopefully it can help someone in my position.
1) I realized that the partitions table was probably messed up, so after "aligning" it using fdisk and the table found here:
http://forum.xda-developers.com/showpost.php?p=29585690&postcount=6
I could restore my /rom partition. After I've made a backup of the /rom files...
2) ... I flashed this file using noogie:
http://forum.xda-developers.com/showpost.php?p=49389880&postcount=2
3) I mounted partition2 on my computer (still using noogie) and copied my /rom files back to it.
4) It started! So I applied the official 1.2.1 update from B&N. After update I realized that I actually have a glowlight! It was listed as a regular Simple Touch, so that was a pleasant surprise.
5) Rooted using NookManager. Worked flawlessy. Installed Opera Mobile 12.1 (which have websocket support that I needed). I now have an awesome status "frame".
Thank you for all you help, including the guys & girls posting in the threads linked in this post.
Hello, a few weeks ago I accidentally bricked my A500 in the process of installing custom roms. Today I finally decided to try and revive the thing. After successfully bringing it back to stock Honeycomb, I noticed it was only recognizing 25MB of internal storage, although I have the 32GB model.
My only guess is the somewhere along the line, new partitions were made and upon installing the stock rom, it was installed to a smaller sized partition. So my question is how can I re-partition the whole system and bring it back to how it was fresh out of the box? Also, if anyone thinks that isn't the issue and have another idea what could be wrong, please come forward.
I am looking for a solution which can be used with Windows or Mac (don't currently have a machine running Linux).
Thanks in advance!
Try to check this: http://forum.xda-developers.com/showthread.php?t=1585907 and/or this: http://forum.xda-developers.com/showthread.php?t=2755126 to unbrick your tablet and begin your unlocking process again.