Related
I'm looking for clean (minimal) ROM to use as base for Android ROM. It has to be for T-Mobile HD2 (based on official 3.14 ROM). Most of "clean" ROMs here are for International HD2
Any recommendations ?
Also appreciate advise on dual boot application. Thanks
I have flashed 3.14 rom.Android works fine.except Cprog.exe error.I have done small correction. then all working fine.fast as well.
the perfect rom for you is VBN ROM or VNB ROM im not sure just search it im sure ull find it
rasih5503 said:
I have flashed 3.14 rom.Android works fine.except Cprog.exe error.I have done small correction. then all working fine.fast as well.
Click to expand...
Click to collapse
I know that 3.14 works fine as is. But I think that there could be SMALLER roms based on 3.14 with everything turned off, removed, etc ... so it would load faster
kiloah said:
the perfect rom for you is VBN ROM or VNB ROM im not sure just search it im sure ull find it
Click to expand...
Click to collapse
It seems that vbn rom is discontinued. Not sure if it matters for base ROM, but it seems it is not based on latest 3.14 ROM
bogdatov said:
It seems that vbn rom is discontinued. Not sure if it matters for base ROM, but it seems it is not based on latest 3.14 ROM
Click to expand...
Click to collapse
Not sure what you're talking about but VBN core is 3.14. You can also try OzDroid, both are barebones winmo roms for booting android. I've used both, and they both working flawlessly, very fast and no robo voice in android. I've only recently decided to go to OzDroid because the buttons in WinMo are bigger so it's more touch friendly.
VBN: http://forum.xda-developers.com/showthread.php?t=776971
OzDroid: http://forum.xda-developers.com/showthread.php?t=774417
I was wondering if it was possible to install Android on the stock ROM 3.14 WWE (radio 2.15.50.14). I would like to install android without having to use HSPL because I'd like to keep the phone under warranty
Nahh
Tried doing that. My WM locked up totally. It would start, but NO 3'rd party progs worked. I could not uninstall, nor install.
The only thing that worked was to reset WM.
So i ran the HSPL part, upgraded WM to Dutty, upgraded the Radio, and Android ran smoothly.
I'm not sure if all WM's will lock up, but i only speak for my self.
Btw, my was stock Norwegian.
Good luck
It does work on the latest ROM (3.14). Plenty of people have had it working, me being one of them. It's definitely a good solution for those who don't want to have to upgrade HSPL in order to get a newer radio.
I've been always using Stock roms, and Android has always worked perfectly here.
Currently using 3.14 German Stock Rom + MDJ 1.7 Android room. working flawlessly.
stock orange rom
I am using a stock orange rom. I did HSPL3 and updated the radio to 2.14.50.04.
I went for the FroyoStone_Sense_V3.2 build, and have had no stability issues. I use this as my main phone and never revert back to winmo.
Like most I do suffer from data drops, but get around it by toggling airplane mode.
Hi, two seperate things here, you can run it on a stock rom see my sig, but you must install HSPL3.
Mines working just fine...
Didn't alter the WinMo ROM, radio, or even SPL. Just cut & pasta the Android ROM files to SD Card, and magic!
aenedor said:
Hi, two seperate things here, you can run it on a stock rom see my sig, but you must install HSPL3.
Click to expand...
Click to collapse
No, you don't need to install hspl. A radio version >2.08 is enough. Recent stock ROM has 2.15
having HSPL is safer .. I am running the Tmobile stock with hspl ,running Mdeejay Evo and works like a charm .
I don't see how having HSPL could possibly be any safer for running Android from your sd card, as Android doesn't use or touch your SPL at all. You are perfectly safe to run Android on a stock rom, as long as you have a X.XX.50.XX radio everything will be as if you were to run it on a cooked rom
hinky said:
No, you don't need to install hspl. A radio version >2.08 is enough. Recent stock ROM has 2.15
Click to expand...
Click to collapse
Thank-you for correcting me this change to the builds had totally passed me by
hi
which android is most suitable to use on official 3.14 rom. I dont want to use hspl.
can I install to sd without making any change to device? and which android works this way?
thanks all.
You better say, which windows mobile Rom will work best with android, but since you have a 3.14 ROM you can run Android without any modifications to your device, just copy the Android folder then tap clrcad then haret .
Also if one build worked then all others should
on your link for guide to android, it says that "you must have hspl 2 or 3 for android to run well please use HSPL"
is it a must? cant I do it without hspl?
you can - I did just the same thing. Flashed the stock 3.14 ROM and then ran haret.exe from the android folder...
I've installed mdeejay froyo build on my HD2, with the Stock 3.14 WWE ROM (and the radio that came with it, can't remember the number), no HSPL whatsover. So far it's working fine, just a couple of issues with the data connection. Its also the first build ive tried, so if anyone has any feedback on the other builds it'd be great
Hi
My HTC HD2 is currently running Android 2.2 NAND " Clean Desire " ROM.
I had to use MAGLD 1.11 and HSPL_3 to get Android 2.2 on to my HD2 as it is an Australian Leo T9193 - both files are still on my phone.
I want put / revert to a an official clean / stock HTC / Telstra T9193 WinMo ROM.
I have already downloaded the official HTC Telstra ROM and am ready to go.
I know how to load differnet Androind builds, but have no idea how to go back to a stock WinMo ROM
Question.
Can someone please point me to a guide / or explain the steps / what I need to do to go from a HTC HD2 currenlty running an Androind 2.2 NAND back to a HTC HD2 running WinMo 6.5 ?
Much apreciated.
Ben
Read this fully.
Flash CustomRUU ROM
You should flash CustomRUU ROM ( without SPL version if possible )
You may go with any custom / modified ROM, and copy & flash from microSD ( < 4GB )...
This will help you out...
Let us know when you are back to WM 6.5 ........
ben ifin said:
Hi
My HTC HD2 is currently running Android 2.2 NAND " Clean Desire " ROM.
I had to use MAGLD 1.11 and HSPL_3 to get Android 2.2 on to my HD2 as it is an Australian Leo T9193 - both files are still on my phone.
I want put / revert to a an official clean / stock HTC / Telstra T9193 WinMo ROM.
I have already downloaded the official HTC Telstra ROM and am ready to go.
I know how to load differnet Androind builds, but have no idea how to go back to a stock WinMo ROM
Question.
Can someone please point me to a guide / or explain the steps / what I need to do to go from a HTC HD2 currenlty running an Androind 2.2 NAND back to a HTC HD2 running WinMo 6.5 ?
Much apreciated.
Ben
Click to expand...
Click to collapse
into bootloader,flash telstra rom over usb.
that should do it.
If you want to remove hspl too, run hspl3 first and choose 2.08.0000 OR flash the telstra rom from sd card.
I need hd2 to work !!My current ROM is very unstable ROM (DL.Desire.v4.31.44.12) phone sometimes call robotic and need reboot, camera record video with audio not in sync. MMS sometimes not send, Display change colour to lilac and need reboot(al version of android have this bug for my... not in windows mobile).
My hd2 is European version
My baseband version: 15.40.50.07U_2.12.50.02_2
I need ROM with Sense nand for EU hd2, support for 2nd partition ext* microsd and a radio ROM for this.
I'm really desperate, please help
Try this one,I have searched a bit after using many SD versions.I am happy with it so far....
What do you prefer sеns or no sense rom . If i were you I would chose Hyperdroid with no doub
http://forum.xda-developers.com/showthread.php?t=918899
darkphoinix said:
I need hd2 to work !!My current ROM is very unstable ROM (DL.Desire.v4.31.44.12) phone sometimes call robotic and need reboot, camera record video with audio not in sync. MMS sometimes not send, Display change colour to lilac and need reboot(al version of android have this bug for my... not in windows mobile).
My hd2 is European version
My baseband version: 15.40.50.07U_2.12.50.02_2
I need ROM nand for EU hd2, support for 2nd partition ext* microsd and a radio ROM for this.
I'm really desperate, please help
Click to expand...
Click to collapse
Try flashiong a newer radio. I suggest you flash the latest one which is 2.15.50.14 you can down load it from The HTC HD2 Master Radio Thread here om XDA.
Proposed upgrade to 2.15.50.14, I believe will be improved, the other recommendation to you
my favorite rom
http://forum.xda-developers.com/showthread.php?t=954369
HyperDroid rules
T-Macgnolia said:
Try flashiong a newer radio. I suggest you flash the latest one which is 2.15.50.14 you can down load it from The HTC HD2 Master Radio Thread here om XDA.
Click to expand...
Click to collapse
i have tried this radio 2.15.50.14 freeze my hd2 and the first call after reboot cause robotic voice!! Is a problem of EU??
I had major stability issues with every 2.2 Sense based nand rom I tried. Then I installed tytuns gingerbread 2.3 based on the nexus one and have never looked back (current version is 2.5)
You wouldn't know this wasn't an Android phone to be honest. almost everything is prefect, except for laggy HQ video recording that's now been fixed in the new version. Im so content with v2.3 though I won't be upgrading til something major happens!
Sent from my Nexus One
SMS92 said:
I had major stability issues with every 2.2 Sense based nand rom I tried. Then I installed tytuns gingerbread 2.3 based on the nexus one and have never looked back (current version is 2.5)
You wouldn't know this wasn't an Android phone to be honest. almost everything is prefect, except for laggy HQ video recording that's now been fixed in the new version. Im so content with v2.3 though I won't be upgrading til something major happens!
Sent from my Nexus One
Click to expand...
Click to collapse
NexusHD2-Gingerbread
v2.5 (27.MAR)
by tytung
* Rom type: NAND
* Version: v2.5
* Updated: 27 Mar 11, 09:15
* Base: Nexus One
* Android ver: 2.3.2 (Gingerbread)
* Kernel: tytung_r8.3
* Sense: No <---------------------------------- i need SENSE!!!!
darkphoinix said:
i have tried this radio 2.15.50.14 freeze my hd2 and the first call after reboot cause robotic voice!! Is a problem of EU??
Click to expand...
Click to collapse
Are you using a NAND Android ROM or a SD card build? The reason I ask is most NAND Android ROMs work good with the 2.15.50.14 radio, and I have only read reports of the robot voice issue in threads for SD builds. Also if you are using a SD card build and you are still runningvWindows Mobile, ifthe Win Mo ROM is not a 3.14 or a 3.14 based ROM the radio will cause some issues with your HD2 such as frezes and such.
Edit: I looked back at your first post and I think you are running a NAND Android ROM so just disregard some of what I said. But I do recommended changing your ROM I use Hyperdriod check my sig for a link to it.
T-Macgnolia said:
Are you using a NAND Android ROM or a SD card build? The reason I ask is most NAND Android ROMs work good with the 2.15.50.14 radio, and I have only read reports of the robot voice issue in threads for SD builds. Also if you are using a SD card build and you are still runningvWindows Mobile, ifthe Win Mo ROM is not a 3.14 or a 3.14 based ROM the radio will cause some issues with your HD2 such as frezes and such.
Click to expand...
Click to collapse
My rom is NAND DL.Desire.v4.31.44.12 i not have win mobile.