Database Users

[Q] [Help] Can't get any Os on my Leo :(

I followed this guide:
w w w.jayceooi.com/2011/01/07/how-to-install-nand-android-on-htc-hd2-with-clockworkmod-recovery-video
and now i dont have any OS on my htc, it just sais
booting android from nand
and it keeps getting stuck at Go Go GO!!
help me!

hallamartin said:
I followed this guide:
w w w.jayceooi.com/2011/01/07/how-to-install-nand-android-on-htc-hd2-with-clockworkmod-recovery-video
and now i dont have any OS on my htc, it just sais
booting android from nand
and it keeps getting stuck at Go Go GO!!
help me!
Click to expand...
Click to collapse
I would get another ROM and reflash it, whether it's a ZIP ROM (CWM) or a NAND ROM via DFT.

it would be awsome if you could send me a link to a good rom? android or windows? realy need this to work

hallamartin said:
it would be awsome if you could send me a link to a good rom? android or windows? realy need this to work
Click to expand...
Click to collapse
Well there's lots of good roms out there... they are all very easy to flash back and forth from. I hate to say which one is "better" than another as that is purely subjective and everyone has a differing opinion. However, it seems a lot of people really like Sergios, MDJ's and CMYXLGO's ROMs. As a start you may want to check out one of those... Here is a link to the main Android NAND forum.

I have
•HSPL3 ~ SPL-2.08.HSPL
•Radio that support 576 RAM
•DFT MAGLDR Bootloader
•ClockworkMod Recovery
Installed.
Can you send a link to a rom that supports clockwork? i dont realy care witch one just one that works. am e newbie in this just got the phone yesterday, and now i kinda afraid i cant fix it :/ :/

hallamartin said:
I have
•HSPL3 ~ SPL-2.08.HSPL
•Radio that support 576 RAM
•DFT MAGLDR Bootloader
•ClockworkMod Recovery
Installed.
Can you send a link to a rom that supports clockwork? i dont realy care witch one just one that works. am e newbie in this just got the phone yesterday, and now i kinda afraid i cant fix it :/ :/
Click to expand...
Click to collapse
If it turns on and will boot to the bootloader, it's fixable So don't worry that much! Try out Sergio's ROM. It supports CWM. If you do use that one be sure to back up your SD card as you have to repartition it.
The steps to install it are:
Code:
HD2 COREDROID Desire HD V1
1. Extract downloaded zip to a folder of your choice
2. Copy contents of copy_to_sd_root (initrd.gz and zImage) to the root of your sd card
3. Boot into magldr and select USB Flasher option while phone is connected to PC
4. Run DAF.exe included in the zip and follow onscreen instructions.
5. After complete devise will reboot in magldr chose "Boot AD SD" option
6. Device will boot into Clockwork Recovery
7. Select advanced
8. Select Partition SD card (remember too backup all valuable data you have on SD Card)
9. Selet (minimum 512M)(maximum 1024M) Chose what fits best for you Recomended size 1024M
10.Select Swap 0M
11.Wait for the process too finish (do not restart device stay in ClockWork recovery)
12.Connect the Device into USB
13.select mounts and storage
14.select mount USB storage
15.Copy contents of copy_to_sd_root (initrd.gz, zImage) to the root of your sd card
16.Copy CoreDroid_HD_HD2_v*.zip to the root of your sd card
17.Press back key after finish
18.Press back key once more
19.Select install zip from sdcard
20.Select choose zip from sdcard
21.Select CoreDroid_HD_HD2_v* file and then confirm
22.Wait for it too finish
23.After flash options pop up again Press back Key
24.select reboot system now
25.Let it boot wait about +-10Min Enjoy

I haven't really examined the guide you followed that much, but make sure you have installed a recent version of Magldr (i.e. the one you can download in the official Magldr thread in the WinMo subforum, version 1.11 to be precise). The first version(s) have been notorious for the Gogogo! bug persistently affecting some users.
Just a fyi, ignore this if you already have this v1.11

I got the aMagldr V1.11
The rom you sendt me doesnt work, it stopps here:
Run DAF.exe included in the zip and follow onscreen instructions.
i allredy installed a Daf.exe can that be the problem?

hallamartin said:
i allredy installed a Daf.exe can that be the problem?
Click to expand...
Click to collapse
No, because it's not really an installer, but a flasher. I'm not really an expert on the CWM issues, but it seems to me like formatting your SD card(do a full format, not the quick one) might help you, since it's quite probably your SD card being the *****.
It may not help you, but if you've got a few minutes I'd say give it a shot. Don't forget to backup important SD (NAND isn't affected) first of course!
Oh, and there's also this small chance that your CWM download is corrupt. Not sure if that would give the gogogo error though.

Sorry for being a complete newb, but how do i do the hard format?
but do i need the DAF.exe to install the rom?

You'd have to format in Windows (which I assume is the OS you're running), which now that I think of it may be a bit of a problem. I don't think you can mount your SD card with Magldr, which means that you'd have to use an external card reader. If you don't have that, you'd have to reflash WinMo to format, but since that's quite some more work for something that I can't even guarantee to be a solution you might wanna hold on to other suggestions.
DAF.exe is the tool which flashes CWM to your phone. Some other tools and/or ROMS use the same name for their flasher though.

after this one :
8. Select Partition SD card (remember too backup all valuable data you have on SD Card)
9. Selet (minimum 512M)(maximum 1024M) Chose what fits best for you Recomended size 1024M
10.Select Swap 0M
i can't do **** i cant open the device in windows. is there no way i can just system recover the whole device? or do i have to rom it?..
realy need this to be working, prefer android but windows is okey

StephanV said:
You'd have to format in Windows (which I assume is the OS you're running), which now that I think of it may be a bit of a problem. I don't think you can mount your SD card with Magldr, which means that you'd have to use an external card reader. If you don't have that, you'd have to reflash WinMo to format, but since that's quite some more work for something that I can't even guarantee to be a solution you might wanna hold on to other suggestions.
Click to expand...
Click to collapse
dosn't seem like there is allot of things i can do? i just hope i didnt brick it...
i cant send it to repair like this?

hallamartin said:
dosn't seem like there is allot of things i can do? i just hope i didnt brick it...
i cant send it to repair like this?
Click to expand...
Click to collapse
It sure is no brick, as long as you can boot into bootloader (turn on phone while keeping volume down pressed) there's no problem at all. No need to return it either.
If you feel really desperate try the WinMo thing, you've got nothing to lose except for about 30 minutes of your time.

winmo thing? is there any guide?
if i download a format program i can format the sd card..

1. Flash WinMo, this should be no problem in bootloader
2. I think it's possible to format your SD card within WinMo. I've never used WinMo actually so I can't give instructions on that.
If you can't find it or if it isn't possible, mount your SD card so you can see it in Windows. Backup data if necessary. Then right click on it (in Windows), and choose format, then disable quick format which should be selected by default. After the format you should have a clean SD card.
4. Flash Magldr again, following instructions in the official Magldr thread. Download a new copy off xda, to eliminate the possibity of just having had a corrupt download.
6. Flash CWM, following instructions in the official CWM thread.
7. Flash ROM.
Edit: I used WinMo where I meant the mobile OS, and Windows where I meant the pc OS.

I did format the SD card, nothing new just that CWM disapeard.
Now its loading with aMagldr v1.11
And i Have Spl-2.08. Hspl 8g Xe
Can anyone send me a link to a good Win 6.5 rom and anykind of guide?

loading android on htc hd2

is it supposed to take more than 2 hours?

No.
Something must of went wrong.
Can you explain the steps you did?

i extracted to sd card
took out the usb cable
went in my storage card, opened the folder
clicked on clrcad
clicked on haret and started the load
now its reading
acr=### fl=####raac=##

The first i've tried took me about 1h, but I had to install everything Mgldr, CWM, etc. ..

Are you installing SD version or nand?
johnnyboy8707 said:
i extracted to sd card
took out the usb cable
went in my storage card, opened the folder
clicked on clrcad
clicked on haret and started the load
now its reading
acr=### fl=####raac=##
Click to expand...
Click to collapse
Sent from my HD2 using XDA App

what is rootfs?

lozonw said:
Are you installing SD version or nand?
Sent from my HD2 using XDA App
Click to expand...
Click to collapse
im pretty sure my sd card, i went through it to click HaRET

Which rom did you download or trying to install?
I haven't done sd version since nand was released.
Do you need to use windows at all?
johnnyboy8707 said:
im pretty sure my sd card, i went through it to click HaRET
Click to expand...
Click to collapse

lozonw said:
Which rom did you download or trying to install?
I haven't done sd version since nand was released.
Do you need to use windows at all?
Click to expand...
Click to collapse
ive tried shubCRAFT_v1.5_STOCK.rar
and ive tried HyperDroidV1.5.zip
Can you link me the way you did it maybe a quick step guide and a file download pleasE?

It's not supposed to take more than 2 hours, 20 mins max.
Try either of the following, a combination, or all of the following:
format your sd
rextract the android folder form the build you downloaded, into the root of your sd card
Try a different blank data image (if the build requires you to have a data image in there, some builds make their own)
If it's the case of where it makes its own, go into the android folder and delete that incomplete data image
Is it just the build you are using now that doesn't work, or does every other build give you the same problem?
Maybe you need HSPL installed, iunno
You got the latest radio?
Tried a different winmo rom?

Try reading thru this.
http://forum.xda-developers.com/showthread.php?t=881958

Kailkti said:
It's not supposed to take more than 2 hours, 20 mins max.
Try either of the following, a combination, or all of the following:
format your sd
rextract the android folder form the build you downloaded, into the root of your sd card
Try a different blank data image (if the build requires you to have a data image in there, some builds make their own)
If it's the case of where it makes its own, go into the android folder and delete that incomplete data image
Is it just the build you are using now that doesn't work, or does every other build give you the same problem?
Maybe you need HSPL installed, iunno
You got the latest radio?
Tried a different winmo rom?
Click to expand...
Click to collapse
ok im sorta lost ill try and make sense of everything, bare with me
how do i download to the root of my sd card? Maybe using nand way would be more easier
latest radio? you got a link for that? how do i check that?
HSPL how would i know if thats installed
Im running 6.5 on the hd2 right now, havent tried anything else except android

Nand is the way if you do not need windows.
Here is a guide by Mskip with links to everything you need.
http://forum.xda-developers.com/showthread.php?t=893948
Here is a link to the ClockworkMod Recovery which will be very helpful.
http://forum.xda-developers.com/showthread.php?t=898913
And here is a link to the rom I use daily, Hyperdroid which is great.
http://forum.xda-developers.com/showthread.php?t=918899
It takes me less than 30 minutes to go thru all the steps needed.

what does "failed to find rootfs on sd car. you need to unzip a rootfs zip file to the root of your sd card

[REF] A Brief guide to Installing and Maintaining Android [SD/RAM] on HD2 Despy1989 thread.
3) Android Build :
Download your chosen Android build on your computer.
Extract / Unzip the folder on the computer
Now copy into the Root of your SD card.
Folder should be labelled "Android"
Once copied into SD card you will see 2 files: CLRCAD.exe and HaRET.exe which have to be run to boot into Android.
There will also be other folders / files (Android Apps, initrd.gz, system.ext2, rootfs.img, zimage, startup.txt, ts-calibration) please leave them as they are.
QUOTE=johnnyboy8707;11737355]what does "failed to find rootfs on sd car. you need to unzip a rootfs zip file to the root of your sd card[/QUOTE]

Stops after GO GO GO at first boot

Hi
I have tried to install android on my phone and after a few attempts I finally got to the step where to install Android which works fine.
But after first boot it is written that it may take upto 20 minutes.... I have tried with different kernels with same results.... it simply stops after GO GO GO then it comes to the android screen and nothing happens... I have tried to let it be for 5 hours... still no reaction!
What I do is to copy the .zip file to my SD card and go to to the boot menu and coose "Install from zip file on SD card".
Any good ideas how to solve it?

PeterSvendsen said:
Hi
I have tried to install android on my phone and after a few attempts I finally got to the step where to install Android which works fine.
But after first boot it is written that it may take upto 20 minutes.... I have tried with different kernels with same results.... it simply stops after GO GO GO then it comes to the android screen and nothing happens... I have tried to let it be for 5 hours... still no reaction!
What I do is to copy the .zip file to my SD card and go to to the boot menu and coose "Install from zip file on SD card".
Any good ideas how to solve it?
Click to expand...
Click to collapse
You need to provide more details for folks around here to reply. Ie:
1. Which model are you using - LEO512 or LEO1024
2. Which MAGLDR was flashed. Version 1.13? Because earlier version had the freeze at GOGOGO! problem.
3. Which android build did you use (DAF build type or CWR type?)
Only then we can even start to suggest what to do to help you
Wait....Are you using builds that requires SDCards to be partitioned? If yes, did you partition as required?

PeterSvendsen said:
Hi
I have tried to install android on my phone and after a few attempts I finally got to the step where to install Android which works fine.
But after first boot it is written that it may take upto 20 minutes.... I have tried with different kernels with same results.... it simply stops after GO GO GO then it comes to the android screen and nothing happens... I have tried to let it be for 5 hours... still no reaction!
What I do is to copy the .zip file to my SD card and go to to the boot menu and coose "Install from zip file on SD card".
Any good ideas how to solve it?
Click to expand...
Click to collapse
Mate,
I experience that too. I think not all ROM can be successfully boot.
My suggestions is either try reflashing or find another ROM that works for your HD2.
Cheers

silverwind said:
Mate,
I experience that too. I think not all ROM can be successfully boot.
My suggestions is either try reflashing or find another ROM that works for your HD2.
Cheers
Click to expand...
Click to collapse
Thats odd.... I only know that the experience may vary across different units (ie: wake-up lag, power drain, etc). Never have i heard that not all builds can be successfully booted. I still think the problems has to do with settings (i.e.: config.txt, NAND partition layout, SD Card partition size and formats etc).
If you have a prob with the builds, please specify clearly which version and your configurations. Only then folks here can advice accordingly....

can't hurt...
task 29, WM6.5 rom installation, magdlr installation then flash the rom again
make shure you created ext partition on SD if required for making work the ROM (check its trhead)....

Do a fresh installation(Format SD->Task 29->Flash Radio->Flash MAGLDR->Flash CWM->Flash ROM from zip using AD recovery option in MAGLDR.. Maybe you are using an incompatible radio?

if i have this problem, i flash windows back (LEOIMG.nbh is always on my sdcard).
this will help me.
after one "no-function"-flash dont try an other flash by the same config like the config before.

I think that problem is in kernel . you trying kernel for new desire, use for N1.

tidus18 said:
You need to provide more details for folks around here to reply. Ie:
1. Which model are you using - LEO512 or LEO1024
2. Which MAGLDR was flashed. Version 1.13? Because earlier version had the freeze at GOGOGO! problem.
3. Which android build did you use (DAF build type or CWR type?)
Only then we can even start to suggest what to do to help you
Wait....Are you using builds that requires SDCards to be partitioned? If yes, did you partition as required?
Click to expand...
Click to collapse
Hi
I have no idea if it is a 1024 or 512! How do I find out?
I use MAGLDR 1.13
I have tried to install
RAFDROID HD 4.0.2|Fastest Full DesHD|DATA2EXT|[Rafpigna 1.8 OC]
[LEO512][LEO1024]CMYLXGOs Stock Desire HD(2)[RUU1.84][RAFPIGNA 1.9OC]
and more
All with same result
I have tried to do the sd partition... .actually with 2 diffent cards but I have never been able to have 2 partitions.... I alway ends up with 1 partition on 2Gb
---
Do a fresh installation(Format SD->Task 29->Flash Radio->Flash MAGLDR->Flash CWM->Flash ROM from zip using AD recovery option in MAGLDR.. Maybe you are using an incompatible radio?
---
I tried that as well with same results
Do you recomment a specific android?
I'm totally new in this and only want a android on my phone )

tidus18 said:
Thats odd.... I only know that the experience may vary across different units (ie: wake-up lag, power drain, etc). Never have i heard that not all builds can be successfully booted. I still think the problems has to do with settings (i.e.: config.txt, NAND partition layout, SD Card partition size and formats etc).
If you have a prob with the builds, please specify clearly which version and your configurations. Only then folks here can advice accordingly....
Click to expand...
Click to collapse
I m trying to say that so many ROMs are available here.
Dont spend your time to long only to one ROM
Unless it is your favorite ROM (Chef)
Cheers...

i guess you did a ROM flash through clockworkmod? if so, did you flash the correct partition sizes (sense roms need often about 400mb /system partition). If not you need to find the 400mb clockwork recovery in this forum.
If you flashed a rom via DAF, please disregard this.
also please post in the correct forum (Q and A would be correct for this topic i believe)

joshman99 said:
i guess you did a ROM flash through clockworkmod? if so, did you flash the correct partition sizes (sense roms need often about 400mb /system partition). If not you need to find the 400mb clockwork recovery in this forum.
If you flashed a rom via DAF, please disregard this.
also please post in the correct forum (Q and A would be correct for this topic i believe)
Click to expand...
Click to collapse
Hi
I have tried to do it by DAF (reports size to big?!) and clockworkmod I have also tried with
Sorry about the trong forum, you're absolutly correct...
Update
I have now bought a new sd micro card to make a correct partition.. but I experience exactly the same... error I cant..
With program do you recomment?

PeterSvendsen said:
Hi
I have tried to do it by DAF (reports size to big?!) and clockworkmod I have also tried with
Sorry about the trong forum, you're absolutly correct...
Update
I have now bought a new sd micro card to make a correct partition.. but I experience exactly the same... error I cant..
With program do you recomment?
Click to expand...
Click to collapse
check this thread http://forum.xda-developers.com/showthread.php?t=981811 task 29 is reccommended do u have red and green call buttons on ur hd 2 or rather t mobile on top of ur screen
than we can help u accordingly
remember a wrong cwm partition might be responsible for bootloop
go for hyperdroidv10 rom it s amazing and use 135 or 150 cwm partition

shhbz said:
check this thread http://forum.xda-developers.com/showthread.php?t=981811 task 29 is reccommended do u have red and green call buttons on ur hd 2 or rather t mobile on top of ur screen
than we can help u accordingly
remember a wrong cwm partition might be responsible for bootloop
go for hyperdroidv10 rom it s amazing and use 135 or 150 cwm partition
Click to expand...
Click to collapse
use panasnic sd fromatter and frmat
http://forum.xda-developers.com/showthread.php?t=905089
or use mini partition tool
cwm is the best method to install android rom
sorry wrong quote

shhbz said:
check this thread http://forum.xda-developers.com/showthread.php?t=981811 task 29 is reccommended do u have red and green call buttons on ur hd 2 or rather t mobile on top of ur screen
than we can help u accordingly
remember a wrong cwm partition might be responsible for bootloop
go for hyperdroidv10 rom it s amazing and use 135 or 150 cwm partition
Click to expand...
Click to collapse
I have done a task29 several times already.
---
.... or rather t mobile on top of ur screen
---
I'm not sure what you ask me about. But no on my phone my call buttons is black and gray
By using panasonic formatter I only format... but the card is on 8Gb so guess I need to make a partition.
Mini partition tool doesnt work correct it report errors as soon as I ftry to format etx3

If your phone has T-mobile on top and buttons are colored red & grees - its LEO1024.
If all grey without any logo on its case/housing - then its LEO512/EURO model.
difference is the NAND size. LEO1024 has 1GB and LEO512 has 512MB.
Peter,
I'll quickly write the outline here, hopefully it helps. But detailed guide on each subject has been posted numerous times here. Please look for them.
Outline to get RAFDROID up and running (Based on your post, im assuming yours is LEO512)
1. Flash MAGLDR 1.13 (this involves entering tricolor screen and flashing like good'ol WM6.5)
2. From MAGLDR, choose USB Flasher mode (Option 4 i think...) and flash Clockwork Mod Recovery with 400MB layout. (this is important, wrong layout will cause bootloop and androd will not boot)
3. Assuming you have 2GB microSD card - Use a memcard reader and connect it to your PC. Dont use mass-storage option from MAGLDR. Launch Minitool Partition and create 1GB FAT32 Primary partiton followed by 1GB EXT3 with 4096 block size primary partition. This process is not as complicated as it may sound
4. Put the downloaded RAFDROID CWR zip file into the FAT32 partition. (When the partitioning is complete, windows will only see 1GB in your microSD. The 2nd 1GB EXT3 partition will only be available to android, so dont worry about it)
5.Once done, pop you microsd in your LEO, and choose Recovery option from menu. Once you enter the recovery menu, choose Install from ZIP file and choose the RAFDROID zip file that you have just put in.
6. Wait, and choose reboot. Whole process should be about 20 min.
7. Enjoy your android
Guys, please add anything if i missed out any steps

PeterSvendsen said:
I have done a task29 several times already.
---
.... or rather t mobile on top of ur screen
---
I'm not sure what you ask me about. But no on my phone my call buttons is black and gray
By using panasonic formatter I only format... but the card is on 8Gb so guess I need to make a partition.
Mini partition tool doesnt work correct it report errors as soon as I ftry to format etx3
Click to expand...
Click to collapse
ok if u have performed task 29
install stock rom having spl 2.08 or less
install hspl 2.08
install malgdr 1.13
install cwm depending on the rom u want to use (it must be mention in the thread which one to go for)
transfer the zip file from pc to mmc card by mounting the card orelse use card reader to transfer the files
go into malgdr option and install from zip
note:create 1024 ext3 or ext4 leaving the rest in fat format
http://forum.xda-developers.com/showthread.php?t=905089 (the best way to parttition)
or http://forum.xda-developers.com/showthread.php?t=910000
or http://forum.xda-developers.com/showthread.php?t=905145
or http://www.youtube.com/watch?v=9d7qhBpCJQc&feature=player_embedded
this is the best method to format your card in order of your requirement
do these steps of formating before instaling cwm or before doing any other steps
and 1 more thing u have a 512 leo euro hd 2 so read these guides here
http://forum.xda-developers.com/showthread.php?t=609477
u wil get all information for stock rom /correct radio and every stuff in the above thread
hope your probelem gets solved this time if u need any more help let me know
remeber if you have hspl 3.03 u cant install android so use stock rom with spl 2.08 and install hspl 2.08 later
i wouls suggest to use hyperdroid http://forum.xda-developers.com/showthread.php?t=918899 as its the best after MDJ built
great battery,speed,smooth,etc no errors but if you want to try froyo built than you are checking the right thread

[Q] htc hd2 installation..did everything and still nothing.

hi
I have been trying to install the new android system that was just recently posted on hd2 apps..i have install hspl on my phone, formated my sd card, updated my radio to 2.15, and still nothing. i have installed the android launcher into the sd card and then to the main phone memory and still nothing, every time i start the installation process for the droid on my htc hd2 it stays on the htc green logo. and yes i did but the android folder on the root of my sd card after extracting it using 7zip....i have also tried doing the installation without my sims card in and still nothing..i dont know what else to do can someone please assist me with this, i dont know what else to do.
nani

narani2 said:
hi
I have been trying to install the new android system that was just recently posted on hd2 apps..i have install hspl on my phone, formated my sd card, updated my radio to 2.15, and still nothing. i have installed the android launcher into the sd card and then to the main phone memory and still nothing, every time i start the installation process for the droid on my htc hd2 it stays on the htc green logo. and yes i did but the android folder on the root of my sd card after extracting it using 7zip....i have also tried doing the installation without my sims card in and still nothing..i dont know what else to do can someone please assist me with this, i dont know what else to do.
nani
Click to expand...
Click to collapse
what medium are your using? is it SD install? Mgcldr, or clK?

narani2 said:
hi
I have been trying to install the new android system that was just recently posted on hd2 apps..i have install hspl on my phone, formated my sd card, updated my radio to 2.15, and still nothing. i have installed the android launcher into the sd card and then to the main phone memory and still nothing, every time i start the installation process for the droid on my htc hd2 it stays on the htc green logo. and yes i did but the android folder on the root of my sd card after extracting it using 7zip....i have also tried doing the installation without my sims card in and still nothing..i dont know what else to do can someone please assist me with this, i dont know what else to do.
nani
Click to expand...
Click to collapse
Dear confused Nani,
1. What android build r u trying to install...post links to the thread.
2. Did u follow proper instructions posted by the build dev?
3. It appears u want 2 install android via SD method, so what windows ROM r u currently using? or would u like to install Android on main memory (NAND)?
Remember, More info is always better...

voncrane said:
Dear confused Nani,
1. What android build r u trying to install...post links to the thread.
2. Did u follow proper instructions posted by the build dev?
3. It appears u want 2 install android via SD method, so what windows ROM r u currently using? or would u like to install Android on main memory (NAND)?
Remember, More info is always better...
Click to expand...
Click to collapse
Hi,
sorry, i was trying to install the android via sd card. and the windows rom that i an currently using is version 2.13.531.1,..what can i do to fix this problem..

narani2 said:
Hi,
sorry, i was trying to install the android via sd card. and the windows rom that i an currently using is version 2.13.531.1,..what can i do to fix this problem..
Click to expand...
Click to collapse
oh and i did follow the instructions exactly as it was posted and still not luck.

narani2 said:
oh and i did follow the instructions exactly as it was posted and still not luck.
Click to expand...
Click to collapse
Dear confused nani,
SD android was so yesterday, wouldn't you want to have hd2 boot straight into android like how window os? It's called NAND android. Unless you like window 6.5 os or dual os then you should gone SD android. I'm throwing this out there just in case you don't know. If you decided to go NAND, follow my sig for the best pure latest android.

hi capt pp
i want to have my options open n b able to still have access to windows.thats why i would prefer via sd card. buf if u can, can u help me with this..i will greatly appreciate if u or anyone can help me with this.
thanx

narani2 said:
hi capt pp
i want to have my options open n b able to still have access to windows.thats why i would prefer via sd card. buf if u can, can u help me with this..i will greatly appreciate if u or anyone can help me with this.
thanx
Click to expand...
Click to collapse
Is this 2.13 TMOUS Stock ROM?
I would suggest you to use Custom ROM that is compatible with SD Android. You can try Platinum Series by Laurentius26 (find the link in WM 6.5 ROM Development forum!). I used this rom for dual boot with SD Android (American Android AOSP)
To do that, you have to install HSPL 4 and Choose SPL 2.08 HSPL.
Do Task 29.
Flash a Custom ROM.and do HARD RESET. Let it fully boot and do Soft REset.
Place your SD Android Folder to the ROOT of your FORMATTED Micro SD Card.
Remember that the name of the folder must be "Android" (without quote). Few SD Android ROM has different folder name, so you might need to rename it.
Now within Android ROM folder, tap CLRCAD and tap HARET
It will boot to ANdroid. Keep in mind it will take around 20 Minutes. Be patient
If you still have a problem or need more detail, you can PM me
Good luck

silverwind said:
Is this 2.13 TMOUS Stock ROM?
I would suggest you to use Custom ROM that is compatible with SD Android. You can try Platinum Series by Laurentius26 (find the link in WM 6.5 ROM Development forum!). I used this rom for dual boot with SD Android (American Android AOSP)
To do that, you have to install HSPL 4 and Choose SPL 2.08 HSPL.
Do Task 29.
Flash a Custom ROM.and do HARD RESET. Let it fully boot and do Soft REset.
Place your SD Android Folder to the ROOT of your FORMATTED Micro SD Card.
Remember that the name of the folder must be "Android" (without quote). Few SD Android ROM has different folder name, so you might need to rename it.
Now within Android ROM folder, tap CLRCAD and tap HARET
It will boot to ANdroid. Keep in mind it will take around 20 Minutes. Be patient
If you still have a problem or need more detail, you can PM me
Good luck
Click to expand...
Click to collapse
yes its a 2.13 tmo usa stock rom...i will try this i just hope it works. thanx silverwind

first of all you needn't do a hspl to run an android sd build. first choose a build from the android sd build threads. i can suggest americandroid if 'sense' isn't so important for you. After you download the rom,unzip and find android folder in it. copy it to your hd2. tap clrcad then haret. first boot may take up to half an hour.

narani2 said:
yes its a 2.13 tmo usa stock rom...i will try this i just hope it works. thanx silverwind
Click to expand...
Click to collapse
try: http://forum.xda-developers.com/showthread.php?t=981811
[04 MAR][MAGLDR/CWM][AUTO-INSTALL] EASY INSTALL OF MAGLDR And ClockworkMod Recovery!

hi mutil,
american droid is the one that i have been trying to install via sd card.i did hspl 2.08,changed radio to 2.15 and rom to platinum series..i was finally able to load droid but now i do not have internet service.so i just booted back up to platinum series where my internet service actually works.

[Q] Dual boot android - NAND & SD

Is there a possibility that we can have 2 Android OS simultaneously i.e, MAGLDR version & SD Card version..???
If so, is there a bootloader that let's us select the version as we had in the SD card ROMs..???

You can use this
http://forum.xda-developers.com/showthread.php?t=1090783
to install MAGLDR and Clockwork recovery.
Get a CWM NAND ROM and put the rom.zip on your phone's sd card and flash it via Clockwork.
Then get an sd build, extract it to your sd card, and follow all the installation steps in the thread you downloaded it from.
You boot the sd build from the MAGLDR menu by chooding AD SD, but first you must set your sd directory. To do this, in the MAGLDR menu choose Services, BootSettings, then AD SD Dir, and choose the directory of your sd build.
Once you have flashed MAGLDR and CWM, you must hold down the Power button while booting up your phone to get to the MAGLDR menu.
Make sure you flash the right partition size for the ROM you'll be flashing to NAND

huggs said:
You can use this
http://forum.xda-developers.com/showthread.php?t=1090783
to install MAGLDR and Clockwork recovery.
Get a CWM NAND ROM and put the rom.zip on your phone's sd card and flash it via Clockwork.
Then get an sd build, extract it to your sd card, and follow all the installation steps in the thread you downloaded it from.
You boot the sd build from the MAGLDR menu by chooding AD SD, but first you must set your sd directory. To do this, in the MAGLDR menu choose Services, BootSettings, then AD SD Dir, and choose the directory of your sd build.
Once you have flashed MAGLDR and CWM, you must hold down the Power button while booting up your phone to get to the MAGLDR menu.
Make sure you flash the right partition size for the ROM you'll be flashing to NAND
Click to expand...
Click to collapse
Oh, that's great..!!!
Thanks for the help, may be I missed that thread while searching..!!!

Dear all,
I hope nobody minds reactivating thread.
I'm currently trying to install an Android dual boot setup. I installed a NAND Android (TBD SensationXL v2.5) which works already quite well for me. Now I tried to start an SD Android Build via Magldr. But none except ICS Beta 5 starts. All other start showing their Boot splash but phone boots never the less to NAND Android.
Has anyone an Idea, what the problem could be?
Thanks in advance

war_child said:
Dear all,
I hope nobody minds reactivating thread.
I'm currently trying to install an Android dual boot setup. I installed a NAND Android (TBD SensationXL v2.5) which works already quite well for me. Now I tried to start an SD Android Build via Magldr. But none except ICS Beta 5 starts. All other start showing their Boot splash but phone boots never the less to NAND Android.
Has anyone an Idea, what the problem could be?
Thanks in advance
Click to expand...
Click to collapse
Your steps should be as follows
1. Download an SD Android ROM with MAGLDR contents as well
2. Rename folder to whatever you like but the startup.txt MUST have rel_path= same name as folder
3. Place folder on root of SD card
4. Go to Services>AD SD Dir>Desired folder (in MAGLDR)
5. Select 'Boot AD SD' (or whatever the Android SD boot option is)
Oh, and reactivating the thread is infinitely better then starting a new one

Dear Nigeldg,
already did all this.
I'm just wondering why the ICS SD build boots normal while every other tested SD build won't boot

war_child said:
Dear all,
I hope nobody minds reactivating thread.
I'm currently trying to install an Android dual boot setup. I installed a NAND Android (TBD SensationXL v2.5) which works already quite well for me. Now I tried to start an SD Android Build via Magldr. But none except ICS Beta 5 starts. All other start showing their Boot splash but phone boots never the less to NAND Android.
Has anyone an Idea, what the problem could be?
Thanks in advance
Click to expand...
Click to collapse
Same here...
I think the SD ROM is not suitable to Recovery..
I've tried installing SD first, after that i install CWR, n try booting AD SD but got stuck on bootsplash..

war_child said:
Dear Nigeldg,
already did all this.
I'm just wondering why the ICS SD build boots normal while every other tested SD build won't boot
Click to expand...
Click to collapse
Hmm, seems odd. Which other builds have you tried?

Nigeldg said:
Hmm, seems odd. Which other builds have you tried?
Click to expand...
Click to collapse
have tried
http://forum.xda-developers.com/showthread.php?t=1256423
and
http://forum.xda-developers.com/showthread.php?t=957652

OK I think I found the solution in this thread:
http://forum.xda-developers.com/showthread.php?t=1375554
So I now switched to 3dak's Kernel on SD Build and it booted. Then tried to apply glitch fix from this post http://forum.xda-developers.com/showpost.php?p=19025914&postcount=12 I copied files via OI File Manager in system/lib/hw and system/lib/egl but now SD Android hangs at bootscreen.
Due to my postcount I can't as this in the respective thread, so does anyone can give a detailed installation description for this fix as my solution was obviously "suboptimal".