Amazon APP Store - Nook Color Q&A, Help & Troubleshooting

Anyone manage to get this to work on a Manual Nootered Nook? I got the App store on my Nook but when I go to download Apps it fails.
Any suggestions?
I'm running a 1.2 NC with 4.5.18 Manual Nooter.

I found that for my manualnooter'd 1.2 NC I needed to have a nook-formatted microSD card installed. Just leaving my CWM Bootable imaged card in would not work, though there wasn't a good error message just failed application loads.
Good luck,
Ron

That is the problem I'm having but I re-formated the SD card after I used it to Nooter and I still get a failure when it tries to download an App.

Haven't had any issues with mine since day 1. Have you tried unchecking and checking the non-market apps box in nook color tools? Not sure if Amazon appstore has any firewall reqmts...

I checked andecked it multiple times and it still doesn't work.
If someone could post step by step instructions for getting the App store on a nootered Nook Color and then downloading apps then maybe I could figure out where I went wrong.

I'm having the same problem. I just rooted my NC today using MN4-5-18. I downloaded the app store and when I try to download an app, it says the download fails.
Thanks!!!

duh, I just figured it out. I had to have a credit card entered for my 1-click payment.
So go into your amazon app store and choose whatever app you want. You'll get an error message and it'll bring you to your account page. Enter in your phone number and turn on 1-click purchase. Enter in your credit card info. Go back into the app store and try downloading again.
Hope it works!

So I fixed it. Apparently I didn't have a default credit card on my Amazon account. Once I set one of my credit card as default it worked perfectly.

Related

BN sync: unexpected error occurred

The NC return "An Unexpected Error Occurred" message after starting the B&N sync in the Libraries of either Magazines or in Books. I did the Market tip which reset Market for me. Btw, I upgraded from ManualNooter 4.5.6 to 4.5.18.
NookColor 1.2, ManualNooter 4.5.18
Any suggestions,
getting the same error
Huh, I think it was from B&N. It also occurred in the B&N app, running under CM7.
Though, I have not confirmed that my magazine subscriptions have updated since the 4.5.18 update.
The error did not occur in the B&N app, running under CM7 today.
see thread http://forum.xda-developers.com/showthread.php?t=1092036 to see if that helps.
Shucks, the error still occurs in MN but doesnt appear in the Nook app in CM7.
Shop displays, but, clicking on a book selection errors out: service unavailablle.
Sent from my NOOKcolor MN 4.5.18 using XDA Premium App
To resolve the issue I reformated my NC and flashed back to 1.01 following this process: [HOW-TO] : Restore Nook Color back to stock EASILY!
Then updated to NC v1.2 via the manual load method.
Then installed MN 4.5.18.
Seems to be working but with an exception or two observed:
1. On install of 1.0.1, the NC app, Springpad appeared as a book on Home and still does. I can archive it (as a book) but it is not in the app archive (1.2). Downloading just makes it appear and act as a book.
Is there a way to remove NC apps that appear and act like books?
2. I thought there was another observation, oh ya, the reformatting and restore to 1.0.1 instructions indicate that I would loose all my personal data. It and other stray folders remain.... curious....
3. Wifi is annoying, but after a while, I noticed it should settle down and mind its own.
MN nice! I like the Nook Home button.
I successfully removed and then installed Springpad:
1. Archive the app.
2. Log onto B&N in your favorite browser and then delete it from the archive.
3. Find app and the install app.
It is somehow tied up with either the "Account and Sync Settings 2.2.1" or "AuthenticationSvc 1.0" system apps...or both together. Maybe someone with better skills than me can work with that.

[1.3]Rooted, can not install Apps from B&N Store

I have my nook color 1.3 rooted using the new "two MN" process. I have everything working as far as market, amazon app store, etc. However I can not seem to install apps from the barnes and noble app store.
The app downloads and starts to install but errors out with a message stating not enough free space. I do not think this message is valid as I know there is plenty of space on the NC.
I have tried on two different NCs I own and the same message is returned.
The only thing I can think of is that the default associated APK loader is not the nooks app loader.
Has anyone else run into this on 1.3?
Thanks,
Rick
You can always downgrade to 1.2. I downgraded my NC from 1.3 to 1.2, then rooted my NC and everything including apps work fine.

[Q] TouchNooter method not working anymore?

I've been reading a lot of people reporting that they first tried TouchNooter and this failed, they then had to restore and try a different rooting method. Can this maybe mean that TouchNooter doesn't work anymore for some reason? Are there people which have recent successes with it?
I got it!
I tried it and failed, and panicked at first. I then realized I could reboot the device, but nothing happened still. ros82 has a great thread with backups, shown here
Anyway, I took the recovery option one, and put it into my NOOK Simple Touch and rebooted. It said resetting to factory, wait till done. When it finished, I was rooted for some reason!
Apparently that "restore to factory" doesn't get around to restoring the boot partition.
I can confirm TouchNooter works - I used 2.1.31 to root a new nook touch that I bought over the weekend (twice).
The device was running 1.1.0 out of the box and I had updated to 1.1.2 before the first attempt. That worked but "device info" showed 1.1.0 after the root, and I couldn't force update the firmware after. Market was working after the 1-day wait as well. I used the 8 hard resets to restore the device and tried again on the stock firmware. Same results. I ended up using the MinimalTouch method after updating to 1.1.2 to root while retaining the firmware update.
Touchnooter did NOT work for me.
I have a new NST, came with 1.1.1 stock, then I manually upgraded to 1.1.2. Registered to B&N, have downloaded several books and transferred some epub and pdf files.
Then tried to root:
Upon starting up the NST with the Touchnooter SD image I created, I got the touchnooter instruction screen, then 20 seconds later did see a quick flash to black, then immediately the Nook startup screen appeared with the 5 dots along the bottom.
The screen stayed there with only the first dot black and it hung.
Waited awhile....10 or 15 min.
Took out the SD card, powered the Nook off then back on without the Touchnooter SD card in it.
The Nook was NOT rooted. Went right to stock Nook screens with my books loaded.
Tried it 2 more times, same result.
WHY doesn't this work on my Nook?
didnt work for me either
looks like touchnooter worked for me, but then on reboot i dont get adw option, just normal nook boots.. tried also salsicha nooter, same thing, why doenst it work for me!!!!
Touchnooter not working
I am sure there is something I can do to get this working, no? Had firmware 1.0.1, used the Touchnooter 2.1.31 booted and saw the little android icon and I started the process. Skipped the sign in and enabled location service, then flash of the screen and back to nook reader home. Restart, no Android icon, just e-reader home screen. Updated firmware to 1.1, retried touchnooter 2.1.31, still nothing comes up on startup, just acts like an e-reader, SD card inserted or not.
Sounds to me like some of you are either missing the prompt to select the launcher on 1st restart, or it's not working for some reason. Do you see the little Button Savior button on the right of the screen? If everything worked, you should be able to use that to get back to ADW. If that doesn't work, your default launcher may be set to B&N's home screen. I'd recommend a complete wipe and try again. TN has worked very well for me on 1.1.x, but be sure to set ADW as your home default on 1st launch if that's what you want.
If you have updated to 1.2, be sure to read around before trying to root. Things have changed a bit, apparently.
No button savior
bobstro said:
Sounds to me like some of you are either missing the prompt to select the launcher on 1st restart, or it's not working for some reason. Do you see the little Button Savior button on the right of the screen? If everything worked, you should be able to use that to get back to ADW. If that doesn't work, your default launcher may be set to B&N's home screen. I'd recommend a complete wipe and try again. TN has worked very well for me on 1.1.x, but be sure to set ADW as your home default on 1st launch if that's what you want.
If you have updated to 1.2, be sure to read around before trying to root. Things have changed a bit, apparently.
Click to expand...
Click to collapse
Arrgg. Unfortunately no, I do not see the button savior on the right. I had it rooted a few months back and restored it to the plain e-reader before trying to re-root again. I thought I did a complete wipe by updating to 1.2. Should I go back to 1.1 and then try the µSD?
Cannot root my Nook touch
shadylady said:
I can confirm TouchNooter works - I used 2.1.31 to root a new nook touch that I bought over the weekend (twice).
The device was running 1.1.0 out of the box and I had updated to 1.1.2 before the first attempt. That worked but "device info" showed 1.1.0 after the root, and I couldn't force update the firmware after. Market was working after the 1-day wait as well. I used the 8 hard resets to restore the device and tried again on the stock firmware. Same results. I ended up using the MinimalTouch method after updating to 1.1.2 to root while retaining the firmware update.
Click to expand...
Click to collapse
I've tried auto-nooter and touchnooter and nothing I try works. My Nook is running version 1.1.0 and WAS rooted before but refuses to root now. I have the nooter image (linux using dd if= method) on the sd card but rebooting the device with the nooter card in it never ends with a rooted nook. It simply boots up normally and then complains that the sd card needs to be formatted. I've tried restting/deregistering the nook and trying again. No dice. This thing will not root.:crying:
praedoratrebates said:
I've tried auto-nooter and touchnooter and nothing I try works. My Nook is running version 1.1.0 and WAS rooted before but refuses to root now. I have the nooter image (linux using dd if= method) on the sd card but rebooting the device with the nooter card in it never ends with a rooted nook. It simply boots up normally and then complains that the sd card needs to be formatted. I've tried restting/deregistering the nook and trying again. No dice. This thing will not root.:crying:
Click to expand...
Click to collapse
- for NST FW 1.2 upgraded from NST with recovery image 1.1 only 'tinynooter' will work (as for now) . You will gain root + adb but not the Market/Google Play.
I
I.1 - do a full recovery (6 failed boot's in a row [reset the device just after it starts booting])
I.2- upgrade to 1.2 manually
I.3- run tinynooter from CWR.
or
II
II.1 - wipe system partition using CWR
II.2 - install 1.1 FW using CWR (from cwr_1.1_zip)
II.3 - upgrade to 1.2 manually
II.4 - apply 'tinynooter' using CWR
same procedure if you just want to root 1.1.
- I.1 or II.1 + II.2 + 'Touchnooter' or any other 'nooter' that used to work
----------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------
I.1 - http://nookdevs.com/Nook_Simple_Touch_restore_to_stock
I.2 / II.3 http://www.barnesandnoble.com/u/Software-Updates-NOOK-Simple-Touch/379003175/
I.3 / II.4 http://forum.xda-developers.com/showpost.php?p=26015994&postcount=1
II.2 http://code.google.com/p/nst-recovery/downloads/list
Worked like a charm...after
I was having problems getting touchnooter to work. Running linux and using the dd command I found out I was screwing up the dd command slightly. I'd place the sdcard in my card reader and it would show up on my system as /dev/sdb1 (for instance) so I did the dd if=touchnooter.img of=/dev/sdb1 command but this produced a card that failed to boot even though the rooting software was clearly installed. Changing it to dd if=touchnooter.img of=/dev/sdb fixed the issue and a couple of days of problems rooting my nook became instant root upon reboot.
Now the problem I'm having is installing apps (or finding them). I try and install a google android app and it refuses to install saying my system security isn't setup to allow unsigned (or something like that) apps. I cannot find any security settings anywhere in what is provided by touchnooter that changes this. Also, while I can find a kindle reader app without issue in he amazon app store with a browser on my computer, it refuses to appear when I search the amazon app store from the rooted nook! WTF?
There seems to be a number of issues, in fact. The Opera Mobile app doesn't function, I cannot get gmail set to sync automatically, and I cannot get my yahoo email setup to work. Add to that the inability to install any apps beyond the base provided by touchnooter...I'm thinking of trying again only using the auto-nooter instead.
praedoratrebates said:
Now the problem I'm having is installing apps (or finding them). I try and install a google android app and it refuses to install saying my system security isn't setup to allow unsigned (or something like that) apps. I cannot find any security settings anywhere in what is provided by touchnooter that changes this. Also, while I can find a kindle reader app without issue in he amazon app store with a browser on my computer, it refuses to appear when I search the amazon app store from the rooted nook! WTF?
There seems to be a number of issues, in fact. The Opera Mobile app doesn't function, I cannot get gmail set to sync automatically, and I cannot get my yahoo email setup to work. Add to that the inability to install any apps beyond the base provided by touchnooter...I'm thinking of trying again only using the auto-nooter instead.
Click to expand...
Click to collapse
I suggest updating your nook to FW version 1.2
root with tinynoot as osowiecki shows in the previous post
you can then use adb to install apps
tinynoot will install nookcolortools- open this - and deselect and then reselect install non-markets apps.
this will allow you to install non-market apps
tinynoot doesn't include any google apps.
instead of gmail, I use k9mail - with this I am able to set up my gmail and other emails - all in one app.

[Q] MN5 success, except for Market access

Following GMPOWER's instructions (LINK), I used ClockWorkMod 3.2.0.1 and manualnooter-5.08.20.basic.block_updates.zip to successfully root my Nook Color. (It's an original, non-blue-dot model which I wiped clean, re-registered and updated to 1.4.3 before rooting.) After rooting, I had a problem with accessing the Market app, but I gained access by following the "Market has limited visibility" solution in GMPOWER's OP. The Market app updated itself to the Play Store, and everything's working great. So far, so good, and thanks to GMPOWER!
I then executed the same process on my son's Nook Color, which I also wiped clean, etc. (It's also a non-blue-dot.) The root process worked, and everything went the same, except that I can't get access to the Market. I've gone through the "Market has limited visibility" solution multiple times, but always get the "An error has occurred. Please try again later." error message. I've gone through 3 cycles of completely wiping the device, reloading to 1.4.3, and rerooting, but without success. Except for access to the Market, it's running fine - that is, I have access to all of his books and apps in the B&N garden, I can run other apps from the drawer, and I can install new apps from B&N's app store. Just can't get it to run the Market. Any suggestions?
Noob apologies if I haven't provided enough information to address the question.
obfucius said:
Following GMPOWER's instructions (LINK), I used ClockWorkMod 3.2.0.1 and manualnooter-5.08.20.basic.block_updates.zip to successfully root my Nook Color. (It's an original, non-blue-dot model which I wiped clean, re-registered and updated to 1.4.3 before rooting.) After rooting, I had a problem with accessing the Market app, but I gained access by following the "Market has limited visibility" solution in GMPOWER's OP. The Market app updated itself to the Play Store, and everything's working great. So far, so good, and thanks to GMPOWER!
I then executed the same process on my son's Nook Color, which I also wiped clean, etc. (It's also a non-blue-dot.) The root process worked, and everything went the same, except that I can't get access to the Market. I've gone through the "Market has limited visibility" solution multiple times, but always get the "An error has occurred. Please try again later." error message. I've gone through 3 cycles of completely wiping the device, reloading to 1.4.3, and rerooting, but without success. Except for access to the Market, it's running fine - that is, I have access to all of his books and apps in the B&N garden, I can run other apps from the drawer, and I can install new apps from B&N's app store. Just can't get it to run the Market. Any suggestions?
Noob apologies if I haven't provided enough information to address the question.
Click to expand...
Click to collapse
Hopefully this will get you going again.
Choose "Manage Applications" from the NookColor Tools app
Select the "All" tab
Scroll down to "Market" and select it
Tap "Force stop"
Tap "Clear data"
Tap the back button
Scroll up to "Google Services Framework" and select it
Tap "Force stop"
Tap "Clear data"
Reboot the device
Once started backup, open the "Market" app
Most likely you will see the same problem
Choose "Manage Application" from the NookColor Tools app
Select the "All" tab
Scroll down to "Market" and select it
Tap "Force stop"
Exit back to the launcher
Open the "Market" app again, and this time it should work
Did you happen to update to the 1.4.3 firmware through CWM, or using the stock update process? Throughout the hundreds of times that I have flashed the stock firmware, most all of the market issues have happened while flashing the stock firmware from CWM. One of the best ways to get back to the stock firmware, is to follow the 8 failed boot process, then download the most current B&N firmware from B&N, rename the file to "update.zip," place in the root of the media partition, and turn the screen off.
Just for my two cents worth of experience...
If you've lost the 8 failed boots for whatever reason, you're better off flashing back to an older stock firmware and then doing the update from B&N to the latest...
GMPOWER said:
Hopefully this will get you going again.
Choose "Manage Applications" from the NookColor Tools app
...
Open the "Market" app again, and this time it should work
Did you happen to update to the 1.4.3 firmware through CWM, or using the stock update process? Throughout the hundreds of times that I have flashed the stock firmware, most all of the market issues have happened while flashing the stock firmware from CWM. One of the best ways to get back to the stock firmware, is to follow the 8 failed boot process, then download the most current B&N firmware from B&N, rename the file to "update.zip," place in the root of the media partition, and turn the screen off.
Click to expand...
Click to collapse
Thanks for the suggestion, but unfortunately I haven't made any progress. I've been resetting to stock firmware using the 8 failed boot process, and I've been using the stock 1.4.3 update (not CWM) to bring it current before running MN5. I have also been erasing and deregistering the device from settings before resetting to stock. I've gone through the whole process at least 5 more times since your post, always with the same result. After successfully completing the MN5 installation, I enter the Market app and follow the prompt to link the device to my son's Google account (which reports success), and then when I continue to where I would accept TOS, it gives me the error box. Following the procedure you posted doesn't get me past the error.
By the way, I started out using the same SD card that I used to successfully root my own device. The last time I went through the process to root my son's, I reformatted the card and rewrote it (using Win32DiskImager with the card in my laptop's slot) with freshly downloaded copies of CWM 3.2.0.1 and manualnooter-5.08.20.basic.block_updates.zip. No difference.
Sorry to be a pain - any other ideas? Thanks again for any help you can offer.
obfucius said:
Thanks for the suggestion, but unfortunately I haven't made any progress. I've been resetting to stock firmware using the 8 failed boot process, and I've been using the stock 1.4.3 update (not CWM) to bring it current before running MN5. I have also been erasing and deregistering the device from settings before resetting to stock. I've gone through the whole process at least 5 more times since your post, always with the same result. After successfully completing the MN5 installation, I enter the Market app and follow the prompt to link the device to my son's Google account (which reports success), and then when I continue to where I would accept TOS, it gives me the error box. Following the procedure you posted doesn't get me past the error.
By the way, I started out using the same SD card that I used to successfully root my own device. The last time I went through the process to root my son's, I reformatted the card and rewrote it (using Win32DiskImager with the card in my laptop's slot) with freshly downloaded copies of CWM 3.2.0.1 and manualnooter-5.08.20.basic.block_updates.zip. No difference.
Sorry to be a pain - any other ideas? Thanks again for any help you can offer.
Click to expand...
Click to collapse
It's no pain, I would also like to find out what is causing the problem just in case it come up again in the future. Every time that I have experienced the problem that you are describing, that method has worked to fix it. Download this modified version on MN, and give it a try, LINK. I updated the market version in it try to get past that step, and also included an app called "Market Device Info." Sorry, I hosted it on mediafire, not my googlecode account just so people wont be downloading it, and trying to use it.
Once you have signed into the market, if it fails, open the app "Market Device Info," and check to see that you have a registered androidid. If this version of MN fails again on you, I will attempt to reproduce the problem on my device tomorrow to try to find a fix for you.
GMPOWER said:
It's no pain, I would also like to find out what is causing the problem just in case it come up again in the future. Every time that I have experienced the problem that you are describing, that method has worked to fix it. Download this modified version on MN, and give it a try (link removed). I updated the market version in it try to get past that step, and also included an app called "Market Device Info." Sorry, I hosted it on mediafire, not my googlecode account just so people wont be downloading it, and trying to use it.
Once you have signed into the market, if it fails, open the app "Market Device Info," and check to see that you have a registered androidid. If this version of MN fails again on you, I will attempt to reproduce the problem on my device tomorrow to try to find a fix for you.
Click to expand...
Click to collapse
That did the trick, thanks! I wiped and reset to stock again, manually updated to 1.4.3, then ran the modified MN5 you provided. After the root completed, I opened the Play Store app, linked to my son's Google account, and it then prompted me to accept TOS with no errors. I've installed a couple of apps, and the only thing I had to do was untick and retick "Allow Non-Market Apps" to convince one of the apps to install. Everything seems to be working great now, thanks again!!
Wipe Clean and Content download
obfucius said:
That did the trick, thanks! I wiped and reset to stock again, manually updated to 1.4.3, then ran the modified MN5 you provided. After the root completed, I opened the Play Store app, linked to my son's Google account, and it then prompted me to accept TOS with no errors. I've installed a couple of apps, and the only thing I had to do was untick and retick "Allow Non-Market Apps" to convince one of the apps to install. Everything seems to be working great now, thanks again!!
Click to expand...
Click to collapse
Please pardon this stupid question but I have tried to find a clear answer b4 coming to this thread. I am attempting to root my NC 1.4.3 w/ the Mannoot 5.08.20 and CWM 3.2.01 per the instructions. http://forum.xda-developers.com/showthread.php?t=1494901
The two questions remain are:
1) You must do a complete wipe before installing this package.
What constitutes a complete wipe
2) YOU MUST DOWNLOAD ALL YOUR B&N CONTENT BEFORE YOU CONTINUE,
Is this archive, to a SD or just download books from Library marked New?
Sorry to be a pain but If I screw this up... I'll never hear the end of it from my 'loving' wife..
TIA
Skyking711 said:
Please pardon this stupid question but I have tried to find a clear answer b4 coming to this thread. I am attempting to root my NC 1.4.3 w/ the Mannoot 5.08.20 and CWM 3.2.01 per the instructions. http://forum.xda-developers.com/showthread.php?t=1494901
The two questions remain are:
1) You must do a complete wipe before installing this package.
What constitutes a complete wipe
2) YOU MUST DOWNLOAD ALL YOUR B&N CONTENT BEFORE YOU CONTINUE,
Is this archive, to a SD or just download books from Library marked New?
Sorry to be a pain but If I screw this up... I'll never hear the end of it from my 'loving' wife..
TIA
Click to expand...
Click to collapse
1. There's a good description of how to do a complete wipe at http://nookdevs.com/Flash_back_to_clean_stock_ROM.
2. When I rooted my NC and my son's, I first downloaded all books, magazines and BN apps that weren't marked as archived with BN. In other words, there wasn't any BN content in my library with a "download" link attached to it. That's my interpretation of GMPOWER's instructions, and you should take what I say with a grain of salt, but I haven't had any trouble with accessing content after rooting.
I think I'm having a similar problem. I used MN 5.08.20 to root from 1.4.3. Everything rooted fine but whenever I try download an app from the market I get an insufficient memory error. I have tried all of the market corrections stated above. Does anyone have any suggestions? Thanks in advance
Sent from my EVO using xda app-developers app
bard77 said:
I think I'm having a similar problem. I used MN 5.08.20 to root from 1.4.3. Everything rooted fine but whenever I try download an app from the market I get an insufficient memory error. I have tried all of the market corrections stated above. Does anyone have any suggestions? Thanks in advance
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Use CWM on an SD to wipe cache. Play store uses cache to temporarily store downloaded apps. It may be full.
Edit: I did a little research and Play Store temporarily stores the downloaded file to /data/data/com.android.providers.download/cache as download.apk, download-1.apk, etc. And it installs it to /data/app. So if you somehow have problems with that download location it will say not enough room.
Sent from my NookColor running CM10 on SD using Tapatalk.

[Q] Bit of a Newbie, need some things cleared up.

Right, let's delve right into this. Though I warn you, it's quite long.
I recently purchased a Nook Simple Touch in the hopes that, after rooting, I would be able to install the Amazon Kindle app.
Things have not gone according to plan.
I am by no means technically inept, I revel in subverting electrical devices into doing things in which they were never designed.
This is why it pains me to have to come here, asking for assistance.
What I Did:
I used TouchNooter 2.1.31 to root my Nook, which was at version 1.1. I followed the somewhat detailed instructions to the letter, and was happily greeted with the Android screen. "Huzzah!" I exclaimed in my exuberance, all was as it should be, my buttocks finally able to unclench itself.
I proceeded with the setup, when I came upon the choice of if I wanted Google to be able to find where I was located, and if they could have access to my Nook, I unchecked both options, even though the instructions recommended not to.
The setup seemed to proceed unhindered. I put in my Email, and I was shown the desktop. I then proceeded to open Youtube, and logged in.
This is probably where I made a mistake. instead of trying to sign into Gmail, I went straight to the market. It didn't work as I anticipated. So I shut the Nook down and chose to wait the recommended 24 hours.
After 24 hours, I returned to my Nook, and attempted to log into the Android Market. It Worked! Goody Gumdrops.
However, attempting to download anything resulted in a message first stating "Your app will now download" And after a few seconds, a notification would pop up, telling me the download has failed, and to try again.
I chose to give up, and instead try the Amazon App Store. It booted up fine, and everything seemed to work. However, upon attempting to download something, it would start, then immediately stop, without any trace of it happening.
Now I was pretty sure, the reason for all this, is I hadn't synced my Gmail account with my Youtube account. I went and attempted it, only to discover it would supersede my Yahoo account if I continued. I chose to make an entirely new account.
I then went back into Youtube to log into my new account, and after doing so, I was greeted my a 401 Loading Error. I exited the app. and was going to try again by clicking on the Youtube App. Only now it wouldn't show up."Fiddlesticks" I mumbled, what now?
I went back to the instructions, and found that the Youtube App can sometimes flake out for unknown reasons. So that's where I left off.
I figure the easiest route to fix this would be to re-root the Nook.
And that's where I could use a bit of help.
How you can help:
I'd like to know the easiest way to re-root a nook that ISN'T Bricked. If it's not too much trouble.
Can I just use the menu inside the nook to reset to factory settings?
Or should I use this method? http://forum.xda-developers.com/showthread.php?t=1289233
What do I do once It's fixed?
After I re-root it, I'm reading that, because it runs on Android 2.1, many apps no longer work, and older versions must be obtained.
It seems like I need the file ES File Explorer to be able to install these old apps, but how does one go about getting said file explorer on the Nook in the first place?
So if anyone would be so kind, as to take the time to not only read, but answer my questions, I would be eternally grateful.
If all you really want is the kindle app, I would suggest you root using 'tinynoot'. No Google apps or appstore, but you can download the Kindle for android app .apk and install it using EZ Installer, which you can get from the Amazon Marketplace. If you actually want to read email and install apps from the Google app store, you will need to use an different method however.
I beg of you: do a reset to stock and back up your device using noogie if you have not already got a bog-standard, unmodified state backup of your device. Your backup should be ~2gig in size, and a really careful person test-fires that backup on a 2-4 gig storage medium other than their NST to be sure they wind up with a disk that has 8 partitions on it once they restore.
This weekend, I decided to try manually updating my rooted glowworm to 1.2.0. I was more-or-less successful but still saw enough unusual things that I went ahead and did an image based restore. Time to backup and restore was less than 15 minutes all told. Time to **** around with manually copying in the files, rather longer
You can indeed use tinynoot which installs the Amazon appstore (much less complex than getting Play going) and I'd think that you could get Kindle installed via Amazon?
FWIW, the Kindle app on the Nook e-ink devices, ahem, fellates gangrenous goats.
I recommend using Calibre and the de-drm tools to manage your own DRM and open the possibility of migrating most or all of your Amazon library to any format you like.

Categories

Resources