[GUIDE] [NS4G] Simple Root/Unroot

[GUIDE] [NS4G] Simple Root/Unroot - Nexus S General

This guide is the easiest way to root and unroot your nexus s 4g. If you follow the instructions well you should be fine, included is odin and the files needed if something goes wrong, but it shouldn't as my 11 year old sister could follow them correctly. READ ENTIRE POST BEFORE ASKING QUESTIONS PLEASE.
If your pc doesn't recognize your phone in fastboot make sure your sdk is up to date including thirdparty installs, and download pdanet trial version and those drivers will work. get drivers here http://hotfile.com/dl/92897696/7ae5290/drivers.rar.html
or if your not comfortable installing drivers download pdanet here and install as it will automatically install drivers for you
http://www.junefabrics.com/android/download.php
ROOTING..................
Ok download the files attached and extract them. For the first part for rooting you will need the:
superuser.zip
recovery3101.img
-Ok put the superuser.zip on the sdcard of your phone.
-Power off phone, when off hold volume up and power button to get to bootloader.
-Go the the tools folder of your android sdk and open command prompt and enter the following command: (easiest way is to hold shift and right click on tools folder and hit the button that says "open command window here" then type these command...
fastboot devices (make sure your device shows up, if not your drivers aren't installed)
fastboot oem unlock
-this will unlock the bootloader and you should follow the prompt and accept (volume up, then power button)
-Some have reported unlocking the bootloader erases sdcard..if so when you reboot after unlocking make sure to put superuser.zip back on sdcard.
-this should reboot your phone, now power off, when off hold volume up and then power button to get back to bootloader.
-place the recovery3101.img in the tools folder and type the following command
fastboot flash recovery recovery3101.img
-You should see it say flash ok in the command prompt, now scroll down (on phone) to recovery and hit the power button (ok button)
-Go to flash zip from sdcard and select the superuser.zip and let it flash.
-when done reboot phone, sign into google accnt, download rom manager, open up rom manager go down to All clockworkmod recoverys and flash 3.1.0 (the newest recovery doesn't work for me as my phone can't get into recovery that is why we are flashing the other one )
-All set you can flash other roms, MAKE SURE TO CREATE BACKUP OF YOUR CURRENT STOCK ROOTED ROM FIRST.
UNROOTING.........
Get files http://www.4shared.com/file/N5g8Hav_/root.html?]
-download and extract files, we will be using odin, the 3 tar files.
-extract tar files to desktop along with odin.
-run odin and in the files section select the boxes bootloader, pda, phone.
-click the buttons next to each and direct it to the .tar files we extracted to desktop, so....
click the bootloader box, direct it to sph-d720-bootloader.tar ...then..
click the pda button direct it toward the sph-d720-pda.tar....then..
click the phone button and direct it toward sph-d720-phone.tar....
-now turn off your phone, when off hold volume up and volume down buttons simultaneously, then quickly press the power button....a huge yellow triangle will pop up and say "downloading'.......
plug your phone via usb to computer....odin should automatically see it.....click the start button in odin and let it do its thing and bam...all set.
If you want stock recovery too place the recovery.img in tools folder, open command prompt..type the following command..
fastboot flash recovery recovery.img
Done.

Ill give this a try when I get home....but I'm sure you need to make sure you have all the correct drivers installed...or when you run the fast boo command it won't recognize your phone is connected.

Subbed for when I have time.
Since the NS4G doesn't have a SD Card where do you put the superuser zip?

This will work for the 3g version, correct?
Sent from my Nexus S using Tapatalk

yes it should work for 3g

where the files to download?dont see the links

dodgeram02 said:
where the files to download?dont see the links
Click to expand...
Click to collapse
Links are right under the post, i'll post the unroot guide tonight as i am at work and cannot do it.

need some help..when i hook my phone to my computer which has windows vista 32..i get a found new hardware that pops up SM BUS CONTROLLER..why is that..but if i go into my DEVICE MANAGER under OTHER DEVICES it has a question mark next to SM BUS CONTROLLER...and at the top of the list i do have ANDROID PHONE.when i expand that there is ANDROID COMPOSITE ADB INTERFACE...this crap is driving me crazy tried everything....HELP.....

I have rooted a EVO IPHONE AND ETC..but for some reason I just cant get this thing to root or to comunnicate to my computer.

MAKE SURE PDANET IS INSTALLED http://api.viglink.com/api/click?fo...ers&txt=http://www.fileserve.com/file/5bgRBX5
OR HERE http://hotfile.com/dl/92897696/7ae5290/drivers.rar.html

dodgeram02 said:
need some help..when i hook my phone to my computer which has windows vista 32..i get a found new hardware that pops up SM BUS CONTROLLER..why is that..but if i go into my DEVICE MANAGER under OTHER DEVICES it has a question mark next to SM BUS CONTROLLER...and at the top of the list i do have ANDROID PHONE.when i expand that there is ANDROID COMPOSITE ADB INTERFACE...this crap is driving me crazy tried everything....HELP.....
Click to expand...
Click to collapse
install pda net before doing this root process..

ok i got it figured out but when i do the RECOVERY STEP I GET A "!"IN A TRIANGLE.

-place the recovery.img in the tools folder and type the following command
fastboot flash recovery recovery.img
-You should see it say flash ok in the command prompt, now scroll down (on phone) to recovery and hit the power button (ok button)
this part isnt workin for me.........

dodgeram02 said:
ok i got it figured out but when i do the RECOVERY STEP I GET A "!"IN A TRIANGLE.
Click to expand...
Click to collapse
redownload the files....
Just in case i reuploaded the recover.img and named it recovery3101.img
place in tools folder and type
fastboot flash recovery recovery3101.img
and should flash just fine...

DUDE YOUR THE MAN!!!!!!GOT R DONE...you been very helpful....out of trying all the other damn ROOTING GUIDES yours was the FASTEST AND THE EASIEST......Thanks bud!!!!

dodgeram02 said:
DUDE YOUR THE MAN!!!!!!GOT R DONE...you been very helpful....out of trying all the other damn ROOTING GUIDES yours was the FASTEST AND THE EASIEST......Thanks bud!!!!
Click to expand...
Click to collapse
No problem.

I can't seem to get this to work. I have Win7 64 and I used PDAnet to install the drivers but when I get to the part where I have to type "fastboot oem unlock" the command prompt just says < waiting for device > and there is nothing on the Nexus S 4g other than the normal fastboot options for me to select.

DarkManX4lf said:
I can't seem to get this to work. I have Win7 64 and I used PDAnet to install the drivers but when I get to the part where I have to type "fastboot oem unlock" the command prompt just says < waiting for device > and there is nothing on the Nexus S 4g other than the normal fastboot options for me to select.
Click to expand...
Click to collapse
Make sure you installed the right drivers....reboot computer, make sure you opened the command prompt in the tools folder as that is where the fastboot commands are located....also it will automatically reboot in the "unlock bootloader menu" you don't select anything...until that menu comes up..make sure your sdk is updated as well..even third party installs..

I want to thank you, these are great instructions so far. I have been trying for days, got my phone unlocked by a mistake, had to Odin back (came from Epic so know and love that system), but it stayed unlocked.
I cannot get it rooted. Used your instructions and get to second part - cannot install fasboot recovery.
My files are in tools listed as recovery-clockwork-3.1.0.1-crespo4g. I ran fastboot, came up with a large square of instructions, not ok, with command and option. So I tried again. nothing
Then went to phone with it connected, tried to select from card the su file. It goes to yellow triangle and finally get back to a reboot.
I am so close, can you help with what I am doing wrong? It is not rooted and cannot get it to do anything.

nmoreman said:
I want to thank you, these are great instructions so far. I have been trying for days, got my phone unlocked by a mistake, had to Odin back (came from Epic so know and love that system), but it stayed unlocked.
I cannot get it rooted. Used your instructions and get to second part - cannot install fasboot recovery.
My files are in tools listed as recovery-clockwork-3.1.0.1-crespo4g. I ran fastboot, came up with a large square of instructions, not ok, with command and option. So I tried again. nothing
Then went to phone with it connected, tried to select from card the su file. It goes to yellow triangle and finally get back to a reboot.
I am so close, can you help with what I am doing wrong? It is not rooted and cannot get it to do anything.
Click to expand...
Click to collapse
MAKE SURE IT IS UNLOCK BY TYPING
FASTBOOT OEM UNLOCK
JUST TO BE SURE ITS UNLOCKED.
to open the command prompt for fastboot when you see the tools folder in android sdk folder hold shift, right click on tools folder and choose option "open comand prompt here"
first use the recovery3101.img i provided. Flash that by typing
fastboot flash recovery recovery3101.img
command prompt will say flash ok...look at your phone..scroll down to recovery option and hit the power button..should load you into clockwork recovery....let me know if you get that far..

Related

Help with Rooting my Nexus One?

I'm having problems Rooting my Nexus One and would be extremely greatful if someone could help me. I got my Nexus One directly shipped to the UK, I am using Windows 7 Ultimate 64bit.
Here's what I've been doing;
I checked 'about' screen and saw it's ERE27 on my N1.
1) I download Superboot for ERE27 - download MD5: 19d302e1bcb18932f009d2a36a3d688f and extracted it to directory (C:\)
2) Turned off phone then plugged in the USB to the N1 (sound on my Windows 7 confirmed the USB connection was made)
3)I I put my N1 in bootloader mode - Turn off the phone then press and hold the trackball to enter the bootloader.
4) I double click 'install-superboot-windows.bat' extracted file on my pc.
BUT then Command Prompt pops up and I get - C:\Users\Bukhtiar\Desktop\1.0-ERE27-nexusone-superboot>fastboot-windows.exe flash boot boot.ERE27.superboot.img
< waiting for device >
After that nothing happens, please could someone help me with a step by step guide as I am new to this.
Many Thanks

You need the USB drivers for the nexus (http://djdoprkngutub.cloudfront.net/usb_driver.zip)
Also, did you unlock the bootloader? You didnt mention it

You need to download the Android SDK and run "Fastboot OEM Unlock"

Do I need to have the phone connected while downloading the Android SDK? Sorry about the Q's but I'm new to all this.

Follow step 1 and 2 in this link
http://androidandme.com/2010/01/hacks/video-how-to-unlock-and-root-a-nexus-one/
then do your superboot step that you have mentioned.
Afterwhich, your phone is unlocked,has a new recovery img, rooted and ready for flashing of custom roms.

Worsty said:
Follow step 1 and 2 in this link
androidandme.com/2010/01/hacks/video-how-to-unlock-and-root-a-nexus-one/
then do your superboot step that you have mentioned.
Afterwhich, your phone is unlocked,has a new recovery img, rooted and ready for flashing of custom roms.
Click to expand...
Click to collapse
I downloaded the Android SDK folder and downloaded the files within it then I followed the links instructions....as follows;
# Reboot phone into fastboot: Power off device and hold down trackball while powering back on. (The fastboot screen is the one with the Androids on skateboards)
# Open a command prompt and navigate to your Android SDK tools folder.
# Type ‘fastboot devices‘ to make sure your phone is recognized.
I opened Command Prompt and navigated to the Android SDK tools folder but I get nothing coming up when I typed ‘fastboot devices‘ nor any message saying my phone is recognized, except in 'Fastboot USB' the phone screen.

Edited /system? Here's how to get the OTA to apply.

http://android.modaco.com/content/t...ng-to-stock-1-19-before-applying-the-new-ota/
P

Seriously, did a mod edit my topic name to put a [Q] in front? (I removed it now).
Just because there's a question mark in the topic doesn't make the topic a question. IYSWIM.
P

do u HAVE to revert to the stock rom to apply the update?

Only if you've deleted stuff on /system.
P

after doing the flash paul, my phone is sitting at the black htc screen with the green indication bar full

'fastboot reboot'
P

thanks, this is my first droid flash. i prolly have flashed windows mobile over a thousand times

Hey paul anyway on doing your method without wiping? Don't wanna lose my launcher pro homescreen setup I got going on took me a while to do lol.
[G2/HTC Vision]

Hey paul did u update. I'm holding off on the update cuz I don't wanna risk never being able to get root

I did yeah.
P

How long should it take to flash?
Its been sitting on a black screen with HTC logo for 20 min
terminal shows:
./fastboot-mac flash zip PC10IMG_Vision_TMOUS_1.19.531.1_Radio_12.21.60.09b_26.02.01.15_M2_release_149459_signed.zip
sending 'zip' (126272 KB)...

http://www.mediafire.com/?s9ld7vag3fdm39g alternate link for shipping rom

mcp2009 said:
http://www.mediafire.com/?s9ld7vag3fdm39g alternate link for shipping rom
Click to expand...
Click to collapse
Oh YES! I was pulling my hair out waiting for the other to download. thank you

ikarma said:
How long should it take to flash?
Its been sitting on a black screen with HTC logo for 20 min
terminal shows:
./fastboot-mac flash zip PC10IMG_Vision_TMOUS_1.19.531.1_Radio_12.21.60.09b_26.02.01.15_M2_release_149459_signed.zip
sending 'zip' (126272 KB)...
Click to expand...
Click to collapse
If it's still on 'sending', you can pull the battery and try again.
P

When I try to extract the fastboot zip it errors me out. Downloading from my device. Not pc
Edit: guessing I'm suppose to use fastboot thru my pc? How does this work?
[G2/HTC Vision]

mine is sitting on htc screen with green progress bar which looks to be full.. is it okay to pull battery and try the update?

Fastboot
When I run fastboot-windows.exe on my computer I just get a quick flash of a black screen and then nothing.
Nevermind kinda went a different route and put the orginal rom on the root of the sdcard and named it to pc10img.zip and the booted into fastboot and then bootloader. It then flashed the zip, took a few min. Than put OTA on root of sd and named it to update.zip and entered into recovery and selected apply sdcard : update.zip. All went well. Actually is now booting for the first time havent even played with new system yet. Thanks for all the hard work that you devs do though. You make these phones bada$$.

Helpful Hint
If you have trouble getting it to "see" the device while in fastboot, just go to control panel, devices, install driver, and pick the one from sdk folder.

This was my first time using fastboot, so I had to do some digging around to figure it out.
Flashing via Fastboot (done within Windows, not the phone):
1.Download ROM and fastboot.zip from OP
2.Leave the ROM alone, and extract the contents of fastboot.zip into the same folder as the ROM
3.Start phone in fastboot mode; when phone is off, hold trackpad button and press power
4.The phone should go into the proper mode, now connect it to USB
5.Open up the command prompt in Windows (Start>run>cmd)
EDIT:6. I forgot to add this: you have to set the directory in cmd to the folder in which the ROM and fastboot files reside. The easiest way to do so is make a folder on the desktop itself, and type "cd desktop/[foldername]" into the command prompt, without the quotes.
7.Follow the last three bullets as listed in Paul's post
I already had the USB drivers for the phone when messing with adb. I don't know if that will affect fastboot; if it does, you'll need to boot the phone normally and connect via USB, download PdaNet onto your computer, and let it install the necessary drivers. Once done, then you may follow the remaining steps.
EDIT: See #6 for updated instructions; it is crucial to avoid the invalid command error.

EfemaN said:
This was my first time using fastboot, so I had to do some digging around to figure it out.
Flashing via Fastboot (done within Windows, not the phone):
1.Download ROM and fastboot.zip from OP
2.Leave the ROM alone, and extract the contents of fastboot.zip into the same folder as the ROM
3.Start phone in fastboot mode; when phone is off, hold trackpad button and press power
4.The phone should go into the proper mode, now connect it to USB
5.Open up the command prompt in Windows (Start>run>cmd)
6.Follow the last three bullets as listed in Paul's post
I already had the USB drivers for the phone when messing with adb. I don't know if that will affect fastboot; if it does, you'll need to boot the phone normally and connect via USB, download PdaNet onto your computer, and let it install the necessary drivers. Once done, then you may follow the remaining steps.
Click to expand...
Click to collapse
LOL! I had sat around and realized even though I used abd and shell... I had no drivers in fastboot. also after flushing type "fastboot reboot" or pull battery to finish.

[ROOT/TWRP] Asus Zenfone Go ZC500TG/Z00VD

First and all, DO THIS AT YOUR OWN RISK!*Credits goes to the devs of 4pda.ru for discovering this method and to Pedro Fortunato for sharing the link.
REQUIREMENTS, PREREQUISITES
Computer, Laptop will do.Asus Zenfone Go Unit - obviously
Adb drivers -*https://mega.nz/#!2scCERxC!gbNd6tJcrUAkn4nv7kU2DBsnSEv8G6-GfZVVl9g97fI download this.
ADB, Root file, Twrp - https://mega.nz/#!HtN03SCa!WxQJ3a33C0XkuE20qv0rYwvxcYrGxZtMk-4jQeL1ykU
Methods
1. PREPARE THE FILES ON YOUR COMPUTER AND PHONE
a. On your computer, Install ADB drivers and extract the files on the given link. To Install the driver, extract the one given from the link and right click on android_winusb.inf and select install. Another way to install it is to download from adbdriver.com and download th ADB Driver Installer.b. On your device enable developer option by tapping build number on about phone.c. Go to Developer options - turn on Allow OEM Unlocking and Usb Debugging.2. UNLOCK YOUR BOOTLOADER
a. Turn off your devices.b. Press Volume up + power simultaneously to go to the bootloaderc. Use volume up to navigate and navigate to fastboot, select by pressing volume downd. On your computer, go to the extracted file (the one i provided from mega.nz) and press shift + right click, the select open command window here.e. Once on the command prompt typefastboot devicesf. if your device appeared (denoted by serial number and device) typefastboot oem unlockg. on your device, follow the on screen instruction, press volume up to agree on unlocking bootloaderNOTE THIS WILL FORMAT YOUR DEVICE SO MAKE SURE YOU ENSURE YOU BACKED UP
h. Wait for it to return to fastboot mode.*Reboot. If you cant reboot it, reinsert battery and turn it on, it will now format your device. It will usually take time to boot so be patient.i. Once booted go back to developer options again and enable oem unlock and usb debugging.3. FLASHING TWRP RECOVERY
Done with unlocking? Lets proceed to flashing TWRP RECOVERY.[WARNING AGAIN: DO THIS AT YOUR OWN RISK. DOUBLE CHECK THE FILES, DOUBLE CHECK THE*COMMANDS THAT YOU TYPE]
a. On your pc, again go to the extracted file, open the command prompt as instructed before and type this adb reboot bootloaderb. Your phone will restart to bootloader again, select fastboot again. Dont close the cmd.c. On the command prompt typefastboot flash recovery recovery.imgd. It will now flash the twrp. Ensure that the recovery is flashed correctly.e. Reboot to recovery by holding volume up + down + power to shut it down without removing rom pc and by pressing vol up and power to boot to bootloader and selecting recovery.f. IF YOU ARE NOW ON THE TWRP. CONGRATS. You have only one thing to do. Flash the root package.4. FLASHING THE ROOT PACKAGE
a. Boot your phone and copy the root package to your internal storage.b.Reboot to TWRP Recovery, once there select install and browse for UPDATE-SuperSU-v2.46.zip you just copied, swipe to install. Then viola! YOUR PHONE IS NOW ROOTED.
AGAIN, I WILL NOT BE HELD LIABLE IF YOUR PHONE DIED, EXPLODED, ATE YOU OR COMMITTED SUICIDE. AGAIN AGAIN. ALL CREDITS GOES TO THE DEVS OF 4pda.ru especially Jemmini for the TWRP Recovery

Yea please there's more people looking for it here at xda

me too I have the same problem! any solution? please help and happy new year!

yes please

Yeah im waiting too , please where people that knowledge about root please makes for asus zenfone go

How root asuse zenfone go?

I think we should root this phone like rooting other mtk devices
sorry for my bad english

keityrobins said:
Hello. I would like to ask for help about our phone. As of now there are no working rooting method available and we cannot move apps to sd since asus disabled that option, our internal storage is therefore limiting us to install more apps. Anyone knows how to root it would be of great help.
Asus Zenfone Go has MT680 chipset running android 5.1.
Click to expand...
Click to collapse
Hello! There was a fully working right way to get Root! The forum 4pda found a solution to this problem :good:

it seems the Russians have done it
http://4pda.ru/forum/index.php?showtopic=698725&view=findpost&p=45947797
would anyone like to try?
please post feedback here!

burovik26 said:
Hello! There was a fully working right way to get Root! The forum 4pda found a solution to this problem :good:
Click to expand...
Click to collapse
will try

pedrofortunato said:
it seems the Russians have done it
http://4pda.ru/forum/index.php?showtopic=698725&view=findpost&p=45947797
would anyone like to try?
please post feedback here!
Click to expand...
Click to collapse
will try and feedback

THE TWRP WORKED. However the root package i had didn't installed the su binary and superuser cannot install it, will try more. Here is the link to the twrp - ftp://1 09.87.84.155/Asus_Zenfone_Go/Recovery/TWRP/2.8.7.0/recovery.img - remove the space between 1 and 0

guys it worked. rooted mine now.

keityrobins said:
guys it worked. rooted mine now.
Click to expand...
Click to collapse
could you make a step by step in english?
and does it erase all data on the phone?

pedrofortunato said:
could you make a step by step in english?
and does it erase all data on the phone?
Click to expand...
Click to collapse
Will do. Thanks for linking And yes on unlocking the bootloader part, it will erase your data.

where should i post the tutorial?

if the adb driver dont work -http://adbdriver.com/downloads

keityrobins said:
if the adb driver dont work -http://adbdriver.com/downloads
Click to expand...
Click to collapse
thank you so much! since there's more than 3 threads about the same thing I don't think it's a bad idea to create a new one for this tutorial

pedrofortunato said:
thank you so much! since there's more than 3 threads about the same thing I don't think it's a bad idea to create a new one for this tutorial
Click to expand...
Click to collapse
then lets create a new one, but first let me know if there are mistakes on the tutorial.

[REF] [ROOT] [RECOVERY] [BOOT LOADER] Metro PCS LG K7 LGMS330 [Guide For Dummies]

I have not been on this site since posting my guide, i do want to let any future people reading this know that, I am not a professional. everything in this guide is using stuff from other peoples threads.... this thread is just step by step directions on how i rooted (and installed TWRP on) MY lg k7 (MetroPCs). Also i had to root before i unlocked the boot loader. Which is not safe, you should probably unlock the boot loader before you root, but i couldn't figure out how to unlock it without root access.
I AM NOT RESPONSIBLE FOR ANY THING THAT HAPPENS TO YOUR DEVICE!
YOU AND ONLY YOU CAN BE HELD RESPONSIBLE
~BACK UP FILES ON PC, YOUR PHONE WILL BE RESET TO FACTORY SETTINGS DURING THIS TUTORIAL~
Step One: Enable Dev Options
A) open settings>about phone>software info then tap "Build Number" really fast about 10 times
B) open settings>Developer Options, then check the box labeled "Enable OEM Unlock", and the box Labeled "USB Debugging"
Step Two: Install Android SDK/ADB/USB drivers
A) go to http://developer.android.com/sdk/index.html in your browser, and click download...
B) go to https://www.microsoft.com/net/default.aspx in your browser, and click the big blue button that says .NET
Framework 4.6.1 or X.X.X depending on when your reading this...
C) go to http://www.oracle.com/technetwork/java/javase/downloads/jdk8-downloads-2133151.html scroll down until you get to the first box, labeled Java SE Development Kit 8u91 or XuXX Depending on when your reading this, then find your OS (ex: Windows x86, Mac OS, Linux, Etc..), then select the download link
Step Three: Installing LG K7's USB Driver's
A) unlock your phone
B) plug your phone into you Computer via USB
C) pull down your notifications, Tap on the USB icon which should be labeled "Media Device (MTP)," "Send Images (PTP)," or "Charge Phone"
D) if a dialogue box pops up asking to install drivers tap install, if not proceed to step E
1) Your PC should ask you if you want to auto run, Either auto run or open the folder and run LG_PC_Programs.exe then proceed to Step Four
E) select "Media Device (PTP)," if not already selected
1) click the three vertical dots next to the magnify glass in the upper right hand corner, select install pc drivers, then tap install
Step Four: Installing Java SE
A) return to the folder where you downloaded the files in step two, install the file which contains the word java in it
Step Five: Installing Microsoft .NET 4 Framework
A) now in the same folder as step four, install the with the name "NDP461-KB3102438-Web," the name might be different then mine depending on when you are reading this
B) if it is already installed it will notify you and you can proceed to the next step
Step Six: Installing Android Studio 2.0 (SDK/ADB Drivers)
A) in the download folder from step four & five, double click the remaining file, the name should contain the words "android", and "studio" in it
B) when the dialogue box opens requesting admin rights, select allow
C) click next
D) click next
E) make sure all boxes are checked and click next
F) read the license agreement, (unless your the 99.9% that doesn't) click i agree
G) you may click next or choose where you'd like to install android studio, and where you'd like to install SDK, for this tutorial i will change make a new folder in my docs named SDK then change the SDK install dir to My Docs
H) click next
I) it will take a moment to install so just wait
(note: the progress bar will fill up, then reset, as it is installing in two separate locations)
J) when finished, click next
K) uncheck the box and click finish
Step Seven: Root your device
(Note: I rooted before i unlocked my boat loader, as i could not get it to boot into boot loader mode until i rooted it)
A) go to http://www.kingroot.net/wap on your android device and download the apk file
B) go to settings>security and check the box labeled "Unknown Sources"
C) install the apk
Video tutorial for king root here: https://www.youtube.com/watch?v=tG_ruuTPVpU
(Not my channel or video)
D) open the king root app
E) make sure you have a charged battery or your phone is plugged in as the rooting process time may vary (better safe then sorry)
F) swipe up until you see a "TRY IT" button click it
G) under "Root Access not available" tap "Get Now
H) do not turn off your phone
I) when it is done you can tap optimize now if you wish, otherwise close the app
Step Eight: Replacing KingRoot with SuperSU ~ W0lfDroid Method
A) go to http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html
B) scroll down until you see the word "download:" (should be right above the related posts
C) click on the "new link" next to "Replace_Kingroot_With_SuperSU.zip"
D) extract the .zip so that the "MRW" folder is on your internal storage
(Easiest way is to download it on PC and open up your k7 in "my computer" and select internal storage and drag the MRW folder inside the .zip there)
E) go to google play and search "terminal emulator for android" or use this link if your reading this on your phone https://play.google.com/store/apps/details?id=jackpal.androidterm&hl=en
F) install the first one, or use this link if your reading this on your phone https://play.google.com/store/apps/details?id=jackpal.androidterm&hl=en
G) open terminal emulator
H) type "su" without the quotations
(everything typed in the terminal is case sensative)
I) type "sh /sdcard/mrw/root.sh" without the quotations
J) you might see a few errors, that is fine
K) wait until it says finished
L) when SU opens, select "update" "install" or what ever pops up
M) when it asks to uninstall, uninstall it, it is not uninstalling SuperSU it is uninstalling Kingroot,
O) if 30 minutes pass and it is still uninstalling then exit the app and then reboot the phone
DO NOT STOP HERE ~ YOU HAVE TO UNLOCK THE BOOTLOADER, and OPTIONALLY FLASH TWRP
Step Nine: Unlocking The Bootloader
A) refer to step one and double check the OEM unlock is enabled and USB debugging is turned on
(If not then please enable them)
B) search quick boot on the google play store download the first app it should be a circle with a lightening bolt
C) open quick boot
D) when asked to "allow root access?" tap allow
E) if an add pops up close it with the ex in one of the corners
F) tap on the word boot loader
G) at the top of your phone you should see " * Welcome To Fast Boot Mode : "
H) now go to your SDK dir, in my case it is C:\Users\USER\Documents\SDK
I) hold shift, then right click on the "platform-tools" folder, then select "open command window here"
J) in the CMD window type "fastboot devices" - without quotations
(everything is case sensative)
K) then type "fastboot oem unlock" - without quotations
L) then type "fastboot getvar unlocked" if that doesn't work try "fastboot getvar" or "fastboot getvar unlock" to confirm if it is unlocked
(if non of the getvar commands work you did something wrong, and i wont be able to help you, but if you followed the tutorial you shouldn't have any issues as these are the exact steps i took)
M) then type "fastboot reboot"
LEAVE THE CMD OPEN OR YOU WILL HAVE TO REPEAT steps H-I
Step Ten: Flashing TWRP
A) go to http://forum.xda-developers.com/general/general/qa-metro-pcs-lg-k7-lgms330-t3331678 and click on the latest download for twrp for me it is BETA1
if the links on that page dont work then use the links here http://forum.xda-developers.com/showpost.php?p=66282525&postcount=42
B) extract the download into your SDK folder on your PC
C) in the sdk CMD window from Step nine
D) type "fastboot devices" - without qoutation
E) ~optional, HIGHLY RECOMENDED~
1)type fastboot "boot twrp-image-3.img" - this will boot up twrp WITHOUT flashing it, just so you can make sure everything is working right
in my case it was twrp-image-3.img check your twrp file name and replace fastboot boot twrp-image-3.img with
fastboot boot INSERT YOUR FILE NAME HERE.img
2)in twrp tap reboot>bootloader
F) when bootloader mode opens back up
G) type "fastboot flash twrp-image-3.img" or "fastboot boot INSERT FILE NAME HERE.img" depending on your file name
H) when finished flashing type "fastboot reboot"
Step eleven
A) follow instructions on step one
B) the reason you must do this is because when you flash TWRP it erases your entire phone and resets it
Congrats you have Successfully Rooted, Unlocked Your Bootloader, and Flashed TWRP, to your LG K7

Well done, my friend. Well done indeed.

[QUOTE
Congrats you have Successfully Rooted, Unlocked Your Bootloader, and Flashed TWRP, to your LG K7[/QUOTE]
is this ok with the gapps 5.1 instsall .zip for twrp install or should i use a different? also, do you have a suggested camera app? awesome thread btw. Nevermind simple twrp install fixed everything.

I have tribute 5 and can't access bootloader or install SuperSU.....always fails.
How can I get this to work?

Today backup important files you need!

Is this a real method BC everybody having problems rooting this device so I ask can u make a video and add screenshots
Sent from my LG-D800 using Tapatalk

I can confirm this method works. The only different thing i did was purchase Supersume pro from playstore. Worked like it said it would. The Ls675 is rootable. But no bootloader unlock or bootloader at all for that matter. Im running MS330 with TWRP full root and have twrp backups and fastboot flashable backups via flashfire....
---------- Post added at 02:28 AM ---------- Previous post was at 02:20 AM ----------
https://mega.nz/#!CRAVWAyI!QIbo20-0ZnVqlREs7ZXF66aB_Eh3UjCEMVQbLuP1Zec
https://mega.nz/#!zBoxGIQR!buXvorPkA14Vr2Idn7uhNPHanOL6wbvcEav3MhRdjv8
https://mega.nz/#!yQBg1ayC!r3qvWfLjCAKg0e8t91J1IEtae8_EwhvYTXjawv7b_2A
Screen shots of root, flashfire backups, and device info

While it does work I can find no method using the buttons to get into twrp all the instructions I find for recovery fail so I can only boot back to it after the phone boots, thus it's worthless at this point. Also the command is fastboot flash recovery imgagename.img and you'll need to remove kingroot from administrators to uninstall.
Anyone else been able to boot directly into twrp from the off position?

zgauthier8286 said:
I can confirm this method works. The only different thing i did was purchase Supersume pro from playstore. Worked like it said it would. The Ls675 is rootable. But no bootloader unlock or bootloader at all for that matter. Im running MS330 with TWRP full root and have twrp backups and fastboot flashable backups via flashfire....
---------- Post added at 02:28 AM ---------- Previous post was at 02:20 AM ----------
https://mega.nz/#!CRAVWAyI!QIbo20-0ZnVqlREs7ZXF66aB_Eh3UjCEMVQbLuP1Zec
https://mega.nz/#!zBoxGIQR!buXvorPkA14Vr2Idn7uhNPHanOL6wbvcEav3MhRdjv8
https://mega.nz/#!yQBg1ayC!r3qvWfLjCAKg0e8t91J1IEtae8_EwhvYTXjawv7b_2A
Screen shots of root, flashfire backups, and device info
Click to expand...
Click to collapse
can you please help me i have 2 MS330 that are bricked

callihn said:
While it does work I can find no method using the buttons to get into twrp all the instructions I find for recovery fail so I can only boot back to it after the phone boots, thus it's worthless at this point. Also the command is fastboot flash recovery imgagename.img and you'll need to remove kingroot from administrators to uninstall.
Anyone else been able to boot directly into twrp from the off position?
Click to expand...
Click to collapse
Try to do the factory hard reset trick but say no at the second screen. I haven't tried it out yet but I've been reading around several sites and that's a possible solution

zgauthier8286 said:
Try to do the factory hard reset trick but say no at the second screen. I haven't tried it out yet but I've been reading around several sites and that's a possible solution
Click to expand...
Click to collapse
Just reboots. Think we're going to have to change something? Boot image? Kernel?

callihn said:
Just reboots. Think we're going to have to change something? Boot image? Kernel?
Click to expand...
Click to collapse
I'm no developer by any means but I have Linux and windows on my laptop. I'm familiar with kernel building on bunt and have the source code for MS330 on my laptop. I have a backup of my boot img as well. If you can get to fastboot u can probably flash my boot img if you want me to send it. I have recovery img as well which is twrp. Let me know if you have any ideas on what u need or i can do as far as possibly doing a fresh build kernel later tonight and getting a zImage out of it

Does anyone know a way to successfully root this phone? Not just recover?
Sent from my LGMS330 using Tapatalk

callihn said:
Just reboots. Think we're going to have to change something? Boot image? Kernel?
Click to expand...
Click to collapse
Of other interest 5.1 is very dendent on Google apps and move app updates to the system via TB or Link2SD fails more than it succeeds, shows they moved but app inaccessible afterwards hence brick. Mine went down trying to integrate play services and reinstalling from adb didn't help. FYI if you relock the BL it'll lock the phone with a security error too. Moving play services causes unending error screens so you can't really see if it's done moving, but I waited a good 5 minutes before reboot. Issue on fails could have been the system not being r/w. Needless to say backup, backup, backup as I hadn't because I've never had a serious issue doing that and considered it a trivial task. Anyone had good success with integrating updates and cache? Anyone restored from twrp yet?

JayCouture.com said:
Does anyone know a way to successfully root this phone? Not just recover?
Sent from my LGMS330 using Tapatalk
Click to expand...
Click to collapse
Yes! Just follow the instructions here:
http://forum.xda-developers.com/showpost.php?p=66456635&postcount=1

zgauthier8286 said:
I'm no developer by any means but I have Linux and windows on my laptop. I'm familiar with kernel building on bunt and have the source code for MS330 on my laptop. I have a backup of my boot img as well. If you can get to fastboot u can probably flash my boot img if you want me to send it. I have recovery img as well which is twrp. Let me know if you have any ideas on what u need or i can do as far as possibly doing a fresh build kernel later tonight and getting a zImage out of it
Click to expand...
Click to collapse
Can you figure out why we can't boot to recovery via hardware buttons? That's critical for tinkering and testing on the go since I always have my phone but not my laptop for booting into recovery with adb. Not sure exactly where to look, probably start with a search for the words "recovery" and "safe mode" for the buttons and "security error" in the boot.img files.

callihn said:
Can you figure out why we can't boot to recovery via hardware buttons? That's critical for tinkering and testing on the go since I always have my phone but not my laptop for booting into recovery with adb. Not sure exactly where to look, probably start with a search for the words "recovery" and "safe mode" for the buttons and "security error" in the boot.img files.
Click to expand...
Click to collapse
If your rooted u can dl a reboot recovery app on the play store I have one that works like a charm. But im gonna take a look through Linux at the kernel options using make menu_config and see if there's anything I can see in there.

zgauthier8286 said:
I'm no developer by any means but I have Linux and windows on my laptop. I'm familiar with kernel building on bunt and have the source code for MS330 on my laptop. I have a backup of my boot img as well. If you can get to fastboot u can probably flash my boot img if you want me to send it. I have recovery img as well which is twrp. Let me know if you have any ideas on what u need or i can do as far as possibly doing a fresh build kernel later tonight and getting a zImage out of it
Click to expand...
Click to collapse
im having a problem w the security 9 error boot loop. only seem to b able to get it into download mode , not bootloader or recovery. would your boot and recovery img's help me at all ya think ? thanks !

goitalone said:
I have tribute 5 and can't access bootloader or install SuperSU.....always fails.
How can I get this to work?
Click to expand...
Click to collapse
Thanks again. For anyone that has a soft bricked LG K7 see this man! He brought my S#!? To life through teamveiwer. Thanks again. From my LG K7.

Maybe just my experience, but regarding step 10. I had to have the twrp image in SDK>platform tools, also when you get to fastboot flash twrp-image-3.img, I couldn't get it to work, until I typed it as fastboot flash recovery twrp-image-3.img. Hope this helps anyone else getting errors during this part. Thanks for the writeup.

Complete Rooting Guide!

I have seen a lot of people using unofficial and third-party methods to root, which can result in a lot of adverse circumstances to say the least.
So I'm presenting a complete noob-friendly guide to rooting.
Prerequisites:
1. A computer ( I'm using Windows 10 but any OS would do)
2. A USB cable
3. Basic computer know-how
Part 1 (Getting computer ready)
Download sdk tools (adb and fastboot) from here
Note that in the entire guide I'm using official products.
So in Windows, download the zip and extract it in any folder.
Now download latest twrp recovery from here
The lastest version as of 7th August, 2017 is 3.1.
The downloaded file will be named as twrp-x.x.x-0-x3.img.
Now rename this as recovery.img (this will make our work easier)
Now move that file to platform-tools folder which we extracted earlier.
Also, I suggest downloading Intel USB drivers for Android from here
Part 2 (Getting Phone Ready)
Unlocking bootloader didn't format my phone but taking a backup is still important.
Now go to Settings<About Phone and click on Build until it says "You have become a developer"
Now back to main settings menu and find "Developer Options". And turn USB debugging on.
Download magisk install.zip, unistall.zip ans apk from here
Now connect your phone to PC via USB cable.
Step 3 (Rooting!!)
Now open platform-tools folder and press Shift+ right click.
Select "open command prompt here".
Now a terminal will open.
Type
Code:
adb devices
Now you will get a prompt on your phone. Accept it.
Now type
Code:
adb reboot bootloader
Your phone will automatically reboot and fastboot will come up.
Now type
Code:
fastboot oem unlock
[Alert! If you get <waiting for device> right click on start menu, select the unrecognized device and install Intel driver in it. Google for detailed instruction]
The process will start and you will get something like
(Okay ....)
(Okay....)
And type prompt. Now type
Code:
fastboot flash recovery recovery.img
Flashing will start.
When you get type prompt again, type
Code:
fastboot reboot
And when the screen switches off, hold power up+power button.
(
Code:
fastboot reboot emergency
should work but it's effect was same as
Code:
fastboot reboot
If you get something like red state... verification failed... Then it's a good news.
Wait a few seconds and then twrp will launch. I suggest swiping on the first screen
[because letv is almost dead and we can't expect any updates. Plus my bootloader was relocked in my first attempt when I didn't swipe.]
(I suggest wiping dalvik cache and cache)
Now you can just reboot your phone normally.
Now install magisk apk.
Now reboot again to recovery. (Easiest way is Update app>tree dots menu> reboot to recovery)
When twrp starts, go to install> download and find magisk zip. Swipe to install.
Reboot and you have a fully rooted phone!!

Will it work with Le1s eco x509
Will the given method work with le 1s eco x509

Yes it will!

Im stuck in <waiting for any device>. I've installed the Intel drivers , what do you mean by select unrecognized device and install the Intel driver in it?

deepu_ said:
Im stuck in <waiting for any device>. I've installed the Intel drivers , what do you mean by select unrecognized device and install the Intel driver in it?
Click to expand...
Click to collapse
Intel driver will not work try downloading drivers from skyneel for our phone

deepu_ said:
Im stuck in <waiting for any device>. I've installed the Intel drivers , what do you mean by select unrecognized device and install the Intel driver in it?
Click to expand...
Click to collapse
Intel drivers worked for my leeco le 1s. Ideally, Intel drivers should work for all devices.
I'll make a tutorial with screenshots on setting up the drivers whenever I get time.

i cant find "open command prompt here" with shift+ Right click in platform-tools folder

junaidshaik96 said:
i cant find "open command prompt here" with shift+ Right click in platform-tools folder
Click to expand...
Click to collapse
Make sure the directory is writable .

stealthinator16 said:
I have seen a lot of people using unofficial and third-party methods to root, which can result in a lot of adverse circumstances to say the least.
So I'm presenting a complete noob-friendly guide to rooting.
Prerequisites:
1. A computer ( I'm using Windows 10 but any OS would do)
2. A USB cable
3. Basic computer know-how
Part 1 (Getting computer ready)
Download sdk tools (adb and fastboot) from here
Note that in the entire guide I'm using official products.
So in Windows, download the zip and extract it in any folder.
Now download latest twrp recovery from here
The lastest version as of 7th August, 2017 is 3.1.
The downloaded file will be named as twrp-x.x.x-0-x3.img.
Now rename this as recovery.img (this will make our work easier)
Now move that file to platform-tools folder which we extracted earlier.
Also, I suggest downloading Intel USB drivers for Android from here
Part 2 (Getting Phone Ready)
Unlocking bootloader didn't format my phone but taking a backup is still important.
Now go to Settings<About Phone and click on Build until it says "You have become a developer"
Now back to main settings menu and find "Developer Options". And turn USB debugging on.
Download magisk install.zip, unistall.zip ans apk from here
Now connect your phone to PC via USB cable.
Step 3 (Rooting!!)
Now open platform-tools folder and press Shift+ right click.
Select "open command prompt here".
Now a terminal will open.
Type
Code:
adb devices
Now you will get a prompt on your phone. Accept it.
Now type
Code:
adb reboot bootloader
Your phone will automatically reboot and fastboot will come up.
Now type
Code:
fastboot oem unlock
[Alert! If you get <waiting for device> right click on start menu, select the unrecognized device and install Intel driver in it. Google for detailed instruction]
The process will start and you will get something like
(Okay ....)
(Okay....)
And type prompt. Now type
Code:
fastboot flash recovery recovery.img
Flashing will start.
When you get type prompt again, type
Code:
fastboot reboot
And when the screen switches off, hold power up+power button.
(
Code:
fastboot reboot emergency
should work but it's effect was same as
Code:
fastboot reboot
If you get something like red state... verification failed... Then it's a good news.
Wait a few seconds and then twrp will launch. I suggest swiping on the first screen
[because letv is almost dead and we can't expect any updates. Plus my bootloader was relocked in my first attempt when I didn't swipe.]
(I suggest wiping dalvik cache and cache)
Now you can just reboot your phone normally.
Now install magisk apk.
Now reboot again to recovery. (Easiest way is Update app>tree dots menu> reboot to recovery)
When twrp starts, go to install> download and find magisk zip. Swipe to install.
Reboot and you have a fully rooted phone!!
Click to expand...
Click to collapse
It works perfectly on x507, thanks bro

Orange State
stealthinator16 said:
I have seen a lot of people using unofficial and third-party methods to root, which can result in a lot of adverse circumstances to say the least.
So I'm presenting a complete noob-friendly guide to rooting.
Prerequisites:
1. A computer ( I'm using Windows 10 but any OS would do)
2. A USB cable
3. Basic computer know-how
Part 1 (Getting computer ready)
Download sdk tools (adb and fastboot) from here
Note that in the entire guide I'm using official products.
So in Windows, download the zip and extract it in any folder.
Now download latest twrp recovery from here
The lastest version as of 7th August, 2017 is 3.1.
The downloaded file will be named as twrp-x.x.x-0-x3.img.
Now rename this as recovery.img (this will make our work easier)
Now move that file to platform-tools folder which we extracted earlier.
Also, I suggest downloading Intel USB drivers for Android from here
Part 2 (Getting Phone Ready)
Unlocking bootloader didn't format my phone but taking a backup is still important.
Now go to Settings<About Phone and click on Build until it says "You have become a developer"
Now back to main settings menu and find "Developer Options". And turn USB debugging on.
Download magisk install.zip, unistall.zip ans apk from here
Now connect your phone to PC via USB cable.
Step 3 (Rooting!!)
Now open platform-tools folder and press Shift+ right click.
Select "open command prompt here".
Now a terminal will open.
Type
Code:
adb devices
Now you will get a prompt on your phone. Accept it.
Now type
Code:
adb reboot bootloader
Your phone will automatically reboot and fastboot will come up.
Now type
Code:
fastboot oem unlock
[Alert! If you get <waiting for device> right click on start menu, select the unrecognized device and install Intel driver in it. Google for detailed instruction]
The process will start and you will get something like
(Okay ....)
(Okay....)
And type prompt. Now type
Code:
fastboot flash recovery recovery.img
Flashing will start.
When you get type prompt again, type
Code:
fastboot reboot
And when the screen switches off, hold power up+power button.
(
Code:
fastboot reboot emergency
should work but it's effect was same as
Code:
fastboot reboot
If you get something like red state... verification failed... Then it's a good news.
Wait a few seconds and then twrp will launch. I suggest swiping on the first screen
[because letv is almost dead and we can't expect any updates. Plus my bootloader was relocked in my first attempt when I didn't swipe.]
(I suggest wiping dalvik cache and cache)
Now you can just reboot your phone normally.
Now install magisk apk.
Now reboot again to recovery. (Easiest way is Update app>tree dots menu> reboot to recovery)
When twrp starts, go to install> download and find magisk zip. Swipe to install.
Reboot and you have a fully rooted phone!!
Click to expand...
Click to collapse
There was a prompt for TWRP update and Magisk Update.
After it has started showing Orange State instead of Red State.
The phone got rebooted and all installed apps were deleted.
Xposed got uninstalled.
Playstore, Googlemaps got unistalled.
Camera is working.
Calling is working.
Now it shows Orange State.
Is it safe.
Can we bring it to red state?
As per this link
https://www.androidauthority.com/verified-boot-warnings-in-android-6-0-marshmallow-650368/
Orange warning: Your device is in an “unlocked” state. This means that your operating system can’t be checked to make sure that it’s safe to use.
Red warning: The operating system on your device has been changed or corrupted and is not safe to use. The device may not work properly and could expose your data to corruption and security risks.
Orange State seems to be a better state than red.

eighty9sid said:
There was a prompt for TWRP update and Magisk Update.
After it has started showing Orange State instead of Red State.
The phone got rebooted and all installed apps were deleted.
Xposed got uninstalled.
Playstore, Googlemaps got unistalled.
Camera is working.
Calling is working.
Now it shows Orange State.
Is it safe.
Can we bring it to red state?
As per this link
https://www.androidauthority.com/verified-boot-warnings-in-android-6-0-marshmallow-650368/
Orange warning: Your device is in an “unlocked” state. This means that your operating system can’t be checked to make sure that it’s safe to use.
Red warning: The operating system on your device has been changed or corrupted and is not safe to use. The device may not work properly and could expose your data to corruption and security risks.
Orange State seems to be a better state than red.
Click to expand...
Click to collapse
I too got orange state when I had to reroot my device after it got bricked, but there was no issue, everything worked perfectly.

Hi l used this very step by step guides but sadly l got stuck at the :-
Alert! If you get <waiting for device> right click on start menu, select the unrecognized device and install Intel driver in it. Google for detailed instruction]
The process will start and you will get something like
(Okay ....)
(Okay....)
Here l select the unrecognized device and install the Intel drivers but it stuck at the "Okay,,,,Okay" prompt. Meaning that l didn't get this okay prompts and it keeps me on waiting the whole day.
Secondly, till this command l stop it and power down the phone, so after l power back on and try opening the "Application" folder, then it's not working anymore, it shuts down itself.
Please help!!

Valambok said:
Hi l used this very step by step guides but sadly l got stuck at the :-
Alert! If you get <waiting for device> right click on start menu, select the unrecognized device and install Intel driver in it. Google for detailed instruction]
The process will start and you will get something like
(Okay ....)
(Okay....)
Here l select the unrecognized device and install the Intel drivers but it stuck at the "Okay,,,,Okay" prompt. Meaning that l didn't get this okay prompts and it keeps me on waiting the whole day.
Secondly, till this command l stop it and power down the phone, so after l power back on and try opening the "Application" folder, then it's not working anymore, it shuts down itself.
Please help!!
Click to expand...
Click to collapse
Don't power off your phone. Post a screenshot of what exact problem you face with driver installation.

Phone Dead
Hi, after completing this step by step guides my Le 1s can't boot to normal anymore, even if I try booting up system from twrp also it doesn't help, I cant even power off now. So, please please help me out again on how to get back to a normal phone. Thanks in advance.
N.B: My phone shows Orange state

Database Users

welcome