Related
I had just finished installing Myns New Rom and Flashed the combo radios aswell, I ran Titanium Backup and installed my apps. I opened Rom Manager and said I had to flash Clockwork Mod and it updated to 3.O. I then proceeded to make a back up of the rom and then my phone went straight to boot loader, It would not reboot and would not enter recovery just reboots back into boot loader. I finally removed the sd card and rebooted after 10 mins it went back to my rom. I then tried to open my sd card on pc an nothing shows up, I tried 2 others and nothing, cannot even format. I borrowed my friends evo and went to recovery with sdcard in to format it say error can not mount and nothing. I tried within the phone, with cm6 installed and it said the sd card was blank or wrong something, (I forgot) No luck. I think it might have destroyed my sd card, Im trying to find a software that may allow me to do so any luck.
-not visible in pc
-cannot mount or format on phone or recovery mode.
-16gb Micro Sd card Sandisk class 2, bought when touch pro came out for 110 from bestbuy (got 100 back from Htc Touch return so really only 10)
-Had partitoned earlier to run mikifroyo app2sd, unpartioned by formatting.
Please any help would be greatly appreciated, thank you.
Ok when I Insert My SD card it just boots to loading and reboots over and over again. Any ideas?
deolarte said:
Ok when I Insert My SD card it just boots to loading and reboots over and over again. Any ideas?
Click to expand...
Click to collapse
try looking in the forums for the lastet recovery in .zip format.
Copy it to the root of the sd card. (if you think that you have an issue with the SD card, then take a fresh SD that is formatted to Fat32. Make sure it is not NTFS. If you formatted on the Mac, make sure the partition format is MBR and not GUID, if you don't know how to do this, I can explain further. The easiest way would be to make sure that you do it on a windows machine)
Start your phone, and hopefully it will install the recovery automatically.
After you install the recovery, and get your phone booted into android, you can locate a pre-rooted rom of your choice in the forums here or at the "other" place if you prefer.
You can read more about it in this other section of the forum. The information below is from that forum, in case you can't find it or are too lazy to search.
http://forum.xda-developers.com/showthread.php?t=705026
Latest version :
IMG (fastboot or flash_image method): recovery-RA-supersonic-v2.2.1.img - MD5Sum: c9a28b8be2c97e5805d530ed991b26fe
PC36IMG (bootloader method) : PC36IMG-Amon-V2.2.1.zip - MD5SUM: 26eadae1e206784d0bb9426f24f4303d
Thanks, I was planning to do this but Im more concerened about my sd card, The phone boots well with out the sd card now, So I was planning to install the zip later. Thanks though I really appreciate the help and thoroughness of your answer which is great. But do you by anychance know what I can to do to recover the card back?
deolarte said:
-not visible in pc
Click to expand...
Click to collapse
Not visible as a drive or not visible as one that can be formatted?
drive on one pc and not possible to be formatted on other. Not possible to format on nook, evo, camera
I just bought a new Nook Color that's got the latest 1.2.0 Firmware. I've already registered it and I'd like to install the latest version of CM7 on it.
I've got a newer iMac with OS X Lion installed. What's the best way for me to Root this and install CM7? What's the latest version of CM7?
I've got a 4 GB MicroSD card and reader for my Mac. I think that I've got all the correct tools, just not sure what would be the easiest method to do this. Thanks for any advice!
It really depends on what you want to do. Do you want to install on emmc? SD? Do you want to run the 7.1RC or the nightly releases?
I recommend reading through the two guides linked below and seeing exactly what you want to do with the device.
As far as using OSX, I believe you can use the *nix commands the same to set up the cards however you need.
http://forum.xda-developers.com/showthread.php?t=1030227 - Emmc
http://forum.xda-developers.com/showthread.php?t=1000957 - SD
Thank you for the links. I was able to get CM7 installed using the second link. I'm going to play around with it now and see how well things work. Thanks!
If you're interested in going eMMC, it's pretty simple from OSX. I got it done in about 15 minutes, and most of that was waiting for the clockwork image to burn. What I did:
Download clockworkmod, repartition zip, reformat zip, cm7 zip, gapps, and oc kernel zip (though if you use the latest nightly you don't need to install the kernel seperately)
Extract the CWR .img file, insert blank sd card into Mac
Open terminal and run the command "diskutil list". Figure out which disk is the SD card. Your HD will probably be /dev/disk0 and your sdcard /dev/disk2, but double check to make sure. You don't want to reformat your HD by accident.
Now run the following commands- assuming your SD card is /dev/disk2, otherwise substitute the appropriate location:
diskutil unmount /dev/disk2
dd if=<drag CWR image here to auto fill in the location> of=/dev/disk2
Now wait. There's no progress bar but the SD card is being burned. Allow about 10 minutes, it's done when the next command prompt line shows up. When it's done, pop the card out then reinsert to mount it. Drag all your zip's onto the card, then eject and put it in your Nook.
Reboot the Nook and it'll boot into clockwork. If you're repartitioning, do those zips now then wipe data and reboot, because you'll probably need to re-register the Nook. Then go back to clockwork and wipe cache, dalvik, data, and flash CM7, gapps & kernel. Don't reboot yet!
Take the SD card out and put it back into your Mac. Open Disk Utility and reformat the card to MS-DOS (FAT32). Then take the card out and put it back into the Nook. Now you can reboot.
That's it! Super easy. At this point I would recommend opening ROM Manager and using it to flash clockwork to the internal memory, makes it easier to upgrade in the future.
I have a Nook Color. Somehow (and I really can't recall how), I can no longer get to the B&N side of my Nook. Even with the micro-SD out, I still go directly into CYANOGEN. To make matters worse, every single app I try to get from the market will not download. Once I 'Accept & download', the app starts to download then I get an Error overlay screen: "name-of-software" could not be downloaded due to an error.
So I have a V--E--R--Y generic tablet that can't do much. Please help.
Thanx in advance...................................
How did you go about installing CM7? Did you install it to the internal storage?
Please help!!! Noobie messed up NC (big time)
That's part of the problem. I did not consciously install to internal memory, I wanted it to boot from the SD card.
That's what I did...
That's what I did once. I unwittingly installed it onto the internal memory. It also happened to be really buggy. I restored it to stock using Clockworkmod Recovery. Did you use the installer for the SD card?
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card.
I put the ZIP file for: gapps-gb-20110828-signedgapps-gb-20110828-signed, and gapps-gb-20110828-newtalk-signed.
I tried the home-power key combo. It asks me if I'm sure that I want to restore to the factory. I say "Yes" but when the Nook starts up, I'm still in cyanogen mod.
Should I (re-)format the MicroSD, write 1gb_clockwork-3.2.0.1-eyeballer (or another version) then move recovery-clockwork-3.2.0.1-encore?
Aside from not being able to get back to B&N-supplied software, I can't do anything with the NC as an Android tablet.
OP, do you intend to install CM7 into the internal memory?
All I'm trying to accomplish is to get back to the factory NC settings. Once I can get there, I'll decide.
How to hard reset and Factory Default Nook Color - http://goo.gl/pSFui
Power down your NC. Wait approximately 10 seconds or so-- just give it a bit of a break between shut down and factory reset.
Press and hold power button and your "N" home button almost simultaneously-- press Power first and then the N.
Hold these until your screen flashes the "Touch the future of reading" message; hold for a second or two afterward, then release. You will then get a prompt asking if you want to reset your nook to factory. Press the home button to continue. It will ask you to confirm. Press the home key again. Your nook will deregister, reset, and when it reboots, you will see "Kate" in her tutorial video, as if you'd never registered it in the first place.
(Obviously your account info will still be valid-- simply register with your email/pw combo instead of creating a new account.)
Hope this helps- if so please click thanks
Sent from my MB860 using XDA App
I did this (more than once - grrrrrrrrrrrrr!). I never see the "touch the future....." message. Instead, I get a cyanogen mod 7 screen with the message "Booting into Recovery". Then I get a sickly yellow-greenish screen that asks (twice) if I want to teset. I confirm both times then it "wipes" the data. It then boots into a cyanogen mod 7 screen (and the skateboarding 'droid) and I go through the registration process.
Now, when I select a Google app, the downloading (Google Maps) seems to be taking forever, but at least I'm not getting the error I got before.
Also, I do not see the progress of the download that I'm used to seeing on my phone. All I see is "movement" under the "Downloading..." message. How long do I leave it before I abort the download?
Your micro sd card is removed right?
Sent from my MB860 using XDA App
mike11050 said:
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card.
I put the ZIP file for: gapps-gb-20110828-signedgapps-gb-20110828-signed, and gapps-gb-20110828-newtalk-signed.
I tried the home-power key combo. It asks me if I'm sure that I want to restore to the factory. I say "Yes" but when the Nook starts up, I'm still in cyanogen mod.
Should I (re-)format the MicroSD, write 1gb_clockwork-3.2.0.1-eyeballer (or another version) then move recovery-clockwork-3.2.0.1-encore?
Aside from not being able to get back to B&N-supplied software, I can't do anything with the NC as an Android tablet.
Click to expand...
Click to collapse
Eyeballer is a clockwork recovery bootable SD image which is used to install stuff (e.g. CM7) to internal memory.
http://forum.xda-developers.com/showthread.php?t=1030227
VeryGreen (size agnostic thread) is the SD image which creates a full OS on the SD card itself leaving the internal memory alone.
http://forum.xda-developers.com/showthread.php?t=1000957
You have used the Eyeballer method and have therefore done an internal install. You must also have installed a CM7 zip not just the gapps zip as they are just google apps and not an actual ROM.
You have 2 ways forward.
The simplest is if you want to end up with internal CM7 and are not interested in running the B & N ROM. Start again by creating the Eyeballer SD card using win32diskImager. Make sure you use a real USB SD adapter and not a card slot on a laptop. Put onto the card the CM7 ROM zip. I recommend the one from the KANG MiRaGe thread in the development forum. It is the most up to date and stable version available at the moment. Also put on one gapps zip (20110828). Now put the card in Nook, Power up and when in recovery then use the menus to format system, data and cache. Do NOT format boot. Then flash the CM7 ROM zip, then the gapps zip. Power down and prepare a clean SD card either by reformatting the eyeballer card with something like the HP USB card utility or a partition manager in the PC like miniTools. You could also use a different SD card if you want to keep the eyeballer one for future use. Put the card back in, power up and you should now be in a stable CM7 environment where you can set up wifi, register with the Google market and download apps.
The second way if you really want to return to stock on the internal and run CM7 of the SD card then use the eyeballer method but instead of flashing CM7 and gapps you now use a return to stock zip. Make sure you still format the partitions as before.
http://forum.xda-developers.com/showthread.php?t=914690
Once you have it back to stock and upgraded to whatever stock you want then follow the VeryGreen method from the link above. Once the SD card has put CM7 on itself, do not worry that there is only a 114MB space if you ever put the card back in the PC. That is normal; it is just the boot partition that the PC sees. The rest of the card can be seen if you USB connect the Nook to the PC.
Yes it is. Also, even though I'm not getting an error, no apps are loading.
You absolutely rock!!!!!!!!!!!!!!
I'm back at the NC "baseline". I tried to go back to a 1.2 (which is what it came with) using "update-nc-stock-1.2-signed". Once I re-booted, it kept returning to the NOOK COLOR screen. Then I used a 1.0.1 from your last post. It came back fine with 2 exceptions. 1) I now have a message that I need to install a SD card. When I do, my (Windows Explorer) "Computer" screen only recognizes the SD card and not the Nook. These are piddly little issues, but if I can get them fixed, great! (Right now, I cannot upgrade the NC or move any books or load any apps.
Thanks again!!!!!!!!!!!!!!!
mike11050 said:
That's part of the problem. I did not consciously install to internal memory, I wanted it to boot from the SD card.
Click to expand...
Click to collapse
I had this same problem. Since I am a new member, and can't post links, I'm going to try to help.
Install Clockwork Recovery to an SD card. Yes, the same way you did when installing clockwork to the SD the first time.
There are some threads on other fourms (google is your friend) that have links to Update files that allow you to update while keeping clockwork recovery, and some that will remove clockwork recovery. If you can remove the SD card and boot into the Stock Nook OS, then don't worry about installing 1.0.0 or 1.0.1 like some of the forms say. Just place the .ZIP file of the hacked update (usually 1.3 or 1.4 I think) into the root folder of the SD card, then Install it on your NC just like installing CM7 onto the internal memory. Your nook should start working again. It restored mine to full functionality. I can now pay 3 Dollars for angry birds, but at least its not as terribly slow and laggy as it was with CM7.
mike11050 said:
You absolutely rock!!!!!!!!!!!!!!
When I do, my (Windows Explorer) "Computer" screen only recognizes the SD card and not the Nook. These are piddly little issues, but if I can get them fixed, great! (Right now, I cannot upgrade the NC or move any books or load any apps.
Thanks again!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
I had the same issue last weekend, somehow my internal memory had become unrecognizable to anything, and the local Barnes and Noble store had a SD card that repartitioned the internal memory, and I was back in business. And as an added bonus I now have the 4 GB app/BN partition and the 1 GB mostly useless partition.
mike11050 said:
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card. ...
Click to expand...
Click to collapse
The instructions I see when googling around where I see that image mentioned are instructions for installing onto the Nook Color internal memory.
In the simplest case, making an n2a card is much less complicated than that ~ all you need is on the PC, write the size agnostic image, then drop in the CM7 build you want to use, then put the card in the Nook and it creates itself. There are upsides and downsides to different n2a methods, but that one seems to be the easiest ~ I've done it successfully several times, and I'm certainly nothing like an expert when it comes to these Android systems.
A recovery card image will make a bootable recovery card ... and while that might not have been what you needed to get what you want, its what you need to get the nook back to stock.
You might want to go to
http://forum.xda-developers.com/showpost.php?p=22809801&postcount=148
... to get a version of the 1.4.1 upgrade that your recovery card can install. You'll probably have to wipe all sorts of partitions, which means you'll have to sign in with the B&N store again and you'll get to download you B&N apps again, but that's pretty straightforward.
This OP in this thread:
http://forum.xda-developers.com/showpost.php?p=10623716&postcount=1
... says that it will be necessary to format ("wipe") the /data and /system partitions, but it doesn't seem like you'll lose anything you want to keep. After all, you've either overwritten or completely tangled up your stock B&N info.
That post above has 1.4.1. There should be a signed 1.4.2 lying around somewhere, but if not, once its back to stock, you can update to 1.4.2 the normal way, download the B&N update file, drop it in the root of the Nook, make sure its at least 30% charged, and let it go to sleep, which will run the update file.
so i have cm 7.3.0-encore installed and
1) i cant get the android apps to install
2)cm mod( rom manager 4.2.0.2 clockwork mod 3.2.0.1) will not let me updgrade to premium
when i try to download rom it tells me i must upgrade rom manager to latest version and when i press ok i get another box that says "the application ROM Manager process com.koushikdutta.rommanager) has stopped unexpectedly please try again" and when i press ok i get sent bact to the home screen.
3)when i try to reboot into recovery,1) with the sd card in,i get booted to the main cyanogen mod home screen
4) and when i try to install gapps i go into the recovery,/install zip from sd card/choose zip from sd card/confirm install/when it says install complete,i exit out(reboot system now)it goes back to the main nook color screen so i have to power the nook off and back on so it can boot into cm. once back in cm,i dont have any market.
Oh and my software version is 1.2.0
PLEASE HELP!!
As much as I or we want to help you, we are completely lack of info.
Please provide some basic info about your system and what you are trying to do.
1. Where did you get cm7.3.0?
2. On your very last sentence, 1.2.0. What is that?
3. How have you run "which ROM"? from eMMC or uSD?
Those info is a good start to get more help.
votinh said:
As much as I or we want to help you, we are completely lack of info.
Please provide some basic info about your system and what you are trying to do.
1. Where did you get cm7.3.0?
2. On your very last sentence, 1.2.0. What is that?
3. How have you run "which ROM"? from eMMC or uSD?
Those info is a good start to get more help.
Click to expand...
Click to collapse
i hvae to pull up the site i got the mod from (i believe it was the cyanogen forum,ill get back to you on that)
2 1.2.0 is the stock nook firmware.(i believe they are up to 1.4 now)
3 i have no idea what your talking about.(im hoping your asking wether im running from internal or sd card. if that is the case,im running from the sd card
OK... to help you there are several things we must know... since answers to each can influence the method we need to get things working as they should:
1. Which method did you use to setup your SD? i.e. verygreen's SASD, racks11479 or another method.
2. Which ROM are you having issues with? i.e. CM7 on SD, Stock 1.2 on eMMC
3. What "android apps" are you having issues with? i.e. google apps (gApps) or another specific "android" app... since they are ALL android apps.
If you used verygreen's SASD then you CANNOT use the stanard ROM manager and CWM to install gApps... you have probably screwed up your stock system and installed gApps there... not that it will work... but you are now no longer "stock"
If you can answer these questions and elaborate as to exactly what you have done, and are trying to accomplish, we can provide informed suggestions to you... otherwise we can flood this thread with a TON of solutions that will EVENTUALLY work... but waste lot of time and cause you much frustration along the way.
DizzyDen said:
OK... to help you there are several things we must know... since answers to each can influence the method we need to get things working as they should:
1. Which method did you use to setup your SD? i.e. verygreen's SASD, racks11479 or another method.
2. Which ROM are you having issues with? i.e. CM7 on SD, Stock 1.2 on eMMC
3. What "android apps" are you having issues with? i.e. google apps (gApps) or another specific "android" app... since they are ALL android apps.
If you used verygreen's SASD then you CANNOT use the stanard ROM manager and CWM to install gApps... you have probably screwed up your stock system and installed gApps there... not that it will work... but you are now no longer "stock"
If you can answer these questions and elaborate as to exactly what you have done, and are trying to accomplish, we can provide informed suggestions to you... otherwise we can flood this thread with a TON of solutions that will EVENTUALLY work... but waste lot of time and cause you much frustration along the way.
Click to expand...
Click to collapse
heres what i did step by step
1) got a sandisk 16gb micro sd card and fomatted it to fat 32.
2) used win image to burn generic sd card image to the sd card
3) once burned, i put cm7.3.0 encore zip file in the root of the sd card
4) put sd card in nook
5) let the install run
thats pretty much it it will not let me update the rom manger or install gapps
im trying to include pics of my rom manager and settings screens
so i have the cm mod running i just want to be able to install gapps and upgrade my rom manager
bigicedog said:
heres what i did step by step
1) got a sandisk 16gb micro sd card and fomatted it to fat 32.
2) used win image to burn generic sd card image to the sd card
3) once burned, i put cm7.3.0 encore zip file in the root of the sd card
4) put sd card in nook
5) let the install run
thats pretty much it it will not let me update the rom manger or install gapps
im trying to include pics of my rom manager and settings screens
so i have the cm mod running i just want to be able to install gapps and upgrade my rom manager
Click to expand...
Click to collapse
First off, you are running CM7.0.3, NOT 7.3 since it is not exist.
Secondly, I start following this post of yours. Pls note, whatever you did or have done described in your very first post were totally screw. Don't know who show you that.
Anyway,
Let's put it this way.
1. Your device is NC (NOOKColor)
2. Your NC is running stock ROM version 1.2.0 on eMMC.
3. You want to run CM7.0.3 on external uSD card.
4. You have problem getting Android apps.
Right? OK
1) got a sandisk 16gb micro sd card and fomatted it to fat 32. => good
2) used win image to burn generic sd card image to the sd card.
Ans: I strongly suggest you getting the Win32DiskImager since a lot of members reported having issue with WinImage.
3) once burned, i put cm7.3.0 encore zip file in the root of the sd card.
Again. It is CM7.0.3.
Assume after successfully done creating a bootable uSD using Win32Diskimager, put your cm7.0.3 (or suggesting using CM7.2-RC KANG) into the root folder, where you see those mlo, ramdisk, ... file. It should only 4 files there at this time.
4) put sd card in nook => correct
5) let the install run => it should
6 - after successfully install, it will automatically delete the cm7.0.3 zip file then shutdown.
7 - remove the uSD, put back into PC, download and copy GApps and put it the root folder, same place where you just put the ROM before.
Link: http://wiki.cyanogenmod.com/index.php?title=Latest_Version
Note: rolling all the way down and select one for CM7, not CM9
8 - remove the uSD off PC, put it back into the NC, power it up
9 - let it boot into CM7 first, do connect to your wifi at this point is a good choice, then reboot and choose reboot into recovery using the menu.
10 - after it boots back into recovery, it will install the GApps now and shutdown again.
11 - reboot and start using.
NOTE: the way I show you above is the easiest way. There are several ways that are so good and too convinience but it's far more advance for newbie. When you get used to the NC, you will find out more.
This link is very helpful:
http://forum.xda-developers.com/showthread.php?t=1000957
votinh said:
First off, you are running CM7.0.3, NOT 7.3 since it is not exist.
Secondly, I start following this post of yours. Pls note, whatever you did or have done described in your very first post were totally screw. Don't know who show you that.
Anyway,
Let's put it this way.
1. Your device is NC (NOOKColor)
2. Your NC is running stock ROM version 1.2.0 on eMMC.
3. You want to run CM7.0.3 on external uSD card.
4. You have problem getting Android apps.
Right? OK
1) got a sandisk 16gb micro sd card and fomatted it to fat 32. => good
2) used win image to burn generic sd card image to the sd card.
Ans: I strongly suggest you getting the Win32DiskImager since a lot of members reported having issue with WinImage.
3) once burned, i put cm7.3.0 encore zip file in the root of the sd card.
Again. It is CM7.0.3.
Assume after successfully done creating a bootable uSD using Win32Diskimager, put your cm7.0.3 (or suggesting using CM7.2-RC KANG) into the root folder, where you see those mlo, ramdisk, ... file. It should only 4 files there at this time.
4) put sd card in nook => correct
5) let the install run => it should
6 - after successfully install, it will automatically delete the cm7.0.3 zip file then shutdown.
7 - remove the uSD, put back into PC, download and copy GApps and put it the root folder, same place where you just put the ROM before.
Link: http://wiki.cyanogenmod.com/index.php?title=Latest_Version
Note: rolling all the way down and select one for CM7, not CM9
8 - remove the uSD off PC, put it back into the NC, power it up
9 - let it boot into CM7 first, do connect to your wifi at this point is a good choice, then reboot and choose reboot into recovery using the menu.
10 - after it boots back into recovery, it will install the GApps now and shutdown again.
11 - reboot and start using.
NOTE: the way I show you above is the easiest way. There are several ways that are so good and too convinience but it's far more advance for newbie. When you get used to the NC, you will find out more.
This link is very helpful:
http://forum.xda-developers.com/showthread.php?t=1000957
Click to expand...
Click to collapse
so i did everything and most of i went as planned until.....
10) i pressed the power button to power off and pressed reboot( i got 3 choices 1-reboot,2-recovery 3-bootloader) i pressed recovery and it rebooted back into cm7. so i powered down the nc,took the sd card out and powered on it went to the stock nc menu. so i re-inserted the sd card and rebooted through the clockwork mod menu,once again it booted into the cm7 without installing gapps, so i once again powered down took out the sd card,powered up.it finnaly booted into recovery so i inserted the sd card(again) went down to "install zip from sd card,choose zip from sd card chose gapps-gb-20110828-signed.zip.installed it said install from sd card complete chose reboot system now. it booted into stock nook.so i powered off and back on into cm7 just to find out GAPPS DID NOT INSTALL. so im at the point where im just gonna get a n2a premade card or something. but i do want to say to say THANK YOU TO EVERYBODY FOR YOUR HELP
bigicedog said:
so i did everything and most of i went as planned until.....
10) i pressed the power button to power off and pressed reboot( i got 3 choices 1-reboot,2-recovery 3-bootloader) i pressed recovery and it rebooted back into cm7. so i powered down the nc,took the sd card out and powered on it went to the stock nc menu. so i re-inserted the sd card and rebooted through the clockwork mod menu,once again it booted into the cm7 without installing gapps, so i once again powered down took out the sd card,powered up.it finnaly booted into recovery so i inserted the sd card(again) went down to "install zip from sd card,choose zip from sd card chose gapps-gb-20110828-signed.zip.installed it said install from sd card complete chose reboot system now. it booted into stock nook.so i powered off and back on into cm7 just to find out GAPPS DID NOT INSTALL. so im at the point where im just gonna get a n2a premade card or something. but i do want to say to say THANK YOU TO EVERYBODY FOR YOUR HELP
Click to expand...
Click to collapse
Did I just said whatever you did or have done, described on your very first post were screw up?
Why would you do that?
You follow to step 10, you are very close to get it up and running then you continue to do the wrong way. That's why you can't get your NC work.
On which instruction you got that shows you doing the "went down to "install zip from sd card,choose zip from sd card" when you are running CM7 from uSD?
My suggestion, start over again, go slow.
Since using the uSD, why not using the stable CM7.1 or CM7.2 KANG? Get rid of the 7.0.3
Hi, so I've tried everything I can think of to restore my Nook to the stock 1.4.1 but nothing has worked and I've given up before I break anything else...
This all started when I was trying to install the CM7.2/CM9 dual boot from SD card - I burned the image to the SD card and booted but the device just hanged at a black screen (for a lot longer than it should have) after the CM "loading" startup screen.. I tried removing the SD card after holding the power button to turn it off but it then refused to boot to the EMMC stock OS... Somehow (I've only ever used SD card CM ROM's) an old CWM install (v.3.0.2 or something) was installed on the internal memory that booted when I tried to launch a factory reset (Power + N + vol+).
I then followed an older guide to restore to stock by formatting the /system and /data and installing a .zip from sd card (the nookcolor_1_4_1_signed.zip) but it failed with a (bad) error....
Now I don't know what to do. The device now hangs at "Read Forever" and the internal CWM is gone, as well as everything else I'm assuming... It will boot into CWM if it's installed on an SD card, but without that it will just reboot into Read Forever when I try to turn it off...
An aside, but now that I've checked with external CWM again, it appears there is now a "/system1, /system2, /data1, and /data2" file on the EMMC...
TL;DR: How do I restore Nook Color to stock 1.4.1 from CWM installed on an external SD card without flagging a "(bad)" error with the install?
Thank you for any help and I hope I haven't bricked this device... Hopefully this is just a case of ignorance on my part
EDIT: I've tried re-downloading the 1.4.1 and even a 1.2 signed ROM with out success. I haven't rooted the device, but I do not know how the internal CWM got there, as well as the fact that the external SD dual boot didn't work.. I'm using a new SanDisk Ultra 16GB SDHC Class 10 card if it makes a difference..
Could not having rooted the Nook be the only cause?
I had successfully dual booted the CM7.2 and CM9 for months until my old 16GB card broke... This was the new card I bought last week and it's been nothing but problems, exacerbated by myself, probably :/
I
cekren said:
Hi, so I've tried everything I can think of to restore my Nook to the stock 1.4.1 but nothing has worked and I've given up before I break anything else...
This all started when I was trying to install the CM7.2/CM9 dual boot from SD card - I burned the image to the SD card and booted but the device just hanged at a black screen (for a lot longer than it should have) after the CM "loading" startup screen.. I tried removing the SD card after holding the power button to turn it off but it then refused to boot to the EMMC stock OS... Somehow (I've only ever used SD card CM ROM's) an old CWM install (v.3.0.2 or something) was installed on the internal memory that booted when I tried to launch a factory reset (Power + N + vol+).
I then followed an older guide to restore to stock by formatting the /system and /data and installing a .zip from sd card (the nookcolor_1_4_1_signed.zip) but it failed with a (bad) error....
Now I don't know what to do. The device now hangs at "Read Forever" and the internal CWM is gone, as well as everything else I'm assuming... It will boot into CWM if it's installed on an SD card, but without that it will just reboot into Read Forever when I try to turn it off...
An aside, but now that I've checked with external CWM again, it appears there is now a "/system1, /system2, /data1, and /data2" file on the EMMC...
TL;DR: How do I restore Nook Color to stock 1.4.1 from CWM installed on an external SD card without flagging a "(bad)" error with the install?
Thank you for any help and I hope I haven't bricked this device... Hopefully this is just a case of ignorance on my part
EDIT: I've tried re-downloading the 1.4.1 and even a 1.2 signed ROM with out success. I haven't rooted the device, but I do not know how the internal CWM got there, as well as the fact that the external SD dual boot didn't work.. I'm using a new SanDisk Ultra 16GB SDHC Class 10 card if it makes a difference..
Could not having rooted the Nook be the only cause?
I had successfully dual booted the CM7.2 and CM9 for months until my old 16GB card broke... This was the new card I bought last week and it's been nothing but problems, exacerbated by myself, probably :/
Click to expand...
Click to collapse
Easy solution. Go to my tips thread linked in my signature and make a bootable CWM card per item A10. Then flash my format 567 zip. Then go to item A15 and download my 1.4.3 stock ROM and flash that. Boot up, register and you are golden.
If you want to put a ROM on SD go to my updated SD instruction thread also in my signature.
Sent from my Nook HD+ Running CM10 on SD
leapinlar said:
I
Easy solution. Go to my tips thread linked in my signature and make a bootable CWM card per item A10. Then flash my format 567 zip. Then go to item A15 and download my 1.4.3 stock ROM and flash that. Boot up, register and you are golden.
If you want to put a ROM on SD go to my updated SD instruction thread also in my signature.
Sent from my Nook HD+ Running CM10 on SD
Click to expand...
Click to collapse
Thanks! I'll try that right when I get home..
EDIT - Awesome - It works! The dual boot card also works!
EDIT 2 - so... booting from the SD card still doesn't work... It just hangs at the Cyanogen7 boot video looping over and over (left to go to the store, got back and it was still looping)... holding power button down just resets the device while the SD card is in, doesn't actually shut down for more than 4 seconds or so....
Should I post this as a new thread? I'll try searching for anybody else having this problem in the mean time...
cekren said:
Thanks! I'll try that right when I get home..
EDIT - Awesome - It works! The dual boot card also works!
EDIT 2 - so... booting from the SD card still doesn't work... It just hangs at the Cyanogen7 boot video looping over and over (left to go to the store, got back and it was still looping)... holding power button down just resets the device while the SD card is in, doesn't actually shut down for more than 4 seconds or so....
Should I post this as a new thread? I'll try searching for anybody else having this problem in the mean time...
Click to expand...
Click to collapse
Are you using Racks' dual boot SD? If so, how recent is it? You might want to go to his special CWM and clear dalvik cache and try rebooting again.
Sent from my Nook HD+ Running CM10 on SD
leapinlar said:
Are you using Racks' dual boot SD? If so, how recent is it? You might want to go to his special CWM and clear dalvik cache and try rebooting again.
Sent from my Nook HD+ Running CM10 on SD
Click to expand...
Click to collapse
Yeah, I used the Dual Boot image I downloaded a couple days ago from Techerrata (I used the one at the top of the list that had the most downloads, connection I'm on is blocking Techerrata so I can't get the exact name ATM) with burned with Win32DiskImager, popped in the card and turned on but it just hangs. I'll try clearing the dalvik cache with his CWM image and see if it fixes anything..
EDIT - Ok, I tried clearing the cache, but it gives me the following error:
E:unkown volume path [/data]
I checked the Mounts and Storage Menu, and it looks like I still have "/system1, /system2, /data1, and /data2" directories, did the 567 format.zip not take care of whatever file structure or partition these were kept on in the EMMC?
cekren said:
Yeah, I used the Dual Boot image I downloaded a couple days ago from Techerrata (I used the one at the top of the list that had the most downloads, connection I'm on is blocking Techerrata so I can't get the exact name ATM) with burned with Win32DiskImager, popped in the card and turned on but it just hangs. I'll try clearing the dalvik cache with his CWM image and see if it fixes anything..
EDIT - Ok, I tried clearing the cache, but it gives me the following error:
E:unkown volume path [/data]
I checked the Mounts and Storage Menu, and it looks like I still have "/system1, /system2, /data1, and /data2" directories, did the 567 format.zip not take care of whatever file structure or partition these were kept on in the EMMC?
Click to expand...
Click to collapse
The format 567 zip was for clearing the partitions on internal memory (emmc). Those partitions you are looking at are on the SD card (system1, etc).
You might just try clearing cache with his cwm rather than dalvik cache. You also might get a better response posting your dual boot question on the dual boot thread. I don't know a lot about the dual boot.
leapinlar said:
The format 567 zip was for clearing the partitions on internal memory (emmc). Those partitions you are looking at are on the SD card (system1, etc).
You might just try clearing cache with his cwm rather than dalvik cache. You also might get a better response posting your dual boot question on the dual boot thread. I don't know a lot about the dual boot.
Click to expand...
Click to collapse
Sounds good, I'll try that. Thanks again for all the help, though!
One thing to note... the initial boot does take a while and sits on a black screen while the cache image and formatted. Racks has put that into the dual boots with loop mounting so each bootable system will have its own cache space and avoid overwriting cache data from nother ROM.
DizzyDen said:
One thing to note... the initial boot does take a while and sits on a black screen while the cache image and formatted. Racks has put that into the dual boots with loop mounting so each bootable system will have its own cache space and avoid overwriting cache data from nother ROM.
Click to expand...
Click to collapse
Good to know, but should it really take more than 90 minutes to initially boot? I let it boot up to CM7 on a freshly burned Class 10 card and left for the store, when I got back it was still at the boot video, watched it for another 5 minutes and it still didn't do anything... I don't really know what the problem is, could it be the card?
I have seen it take up to10 minutes, but 90 is definately excessive... I would suspect the card being the issue... class 10 cards are not good for running any operating system from. While they have exceptional sustained read/write speeds... they (generally) have poor random small read/write speeds, and this is the types of files used by an operating system.
DizzyDen said:
I have seen it take up to10 minutes, but 90 is definately excessive... I would suspect the card being the issue... class 10 cards are not good for running any operating system from. While they have exceptional sustained read/write speeds... they (generally) have poor random small read/write speeds, and this is the types of files used by an operating system.
Click to expand...
Click to collapse
Oh.. ok, well good to know! I'll pick up a different card today and see if that will work.
I got the Mirage 7.2 to work, by writing the "generic_sd.img" to the card, the coping the .zip download to the boot partition (renaming it to "update-cm7-mirage.zip" so the generic loader would see it)...
I inserted the card, booted, and Tux showed up and it ran through partitioning the card, expanding the mirage zip, and shutting down. However, when I turned it back on, it showed the Cyanogen mod bootloader, and I selected "SD Normal" but Tux showed up again and it went through trying to partition again (which it said was not needed, so it skipped) and finding an update- / .zip file (which it deleted when it expanded it before), same with the SD recovery boot option... Should I just try a new card?
EDIT - So, I was sick of messing with SD card booting, and realized I really don't care if I have the stock OS on it anymore since my warranty is about to run out anyway, I just rooted it an installed Mirage 7.2 and it works! Thanks for the help with the SD Card problems, though!