Related
Would someone write a tutorial on installing Android on ext2? I thought I understood how it works, but realized I was only booting from haret, and not installing onto the ext2 partitions I had made. I went back and reread a lot of the old threads, but find it hard to figure out when to push vol down or hit end. Also, I prefer to boot into 320 x 480 so I can see the whole Market. This makes the print so tiny, I'm not sure what I'm seeing. (I did manage to get it on to my ext2 partition, I think. How do I know for sure.) Thirdly, the choices when booting are different, depending on whether you want to install for the first time or not. So, could someone tell us what the correct selections are if you are:
1. Installing onto ext2 partitions for the first time.
2. Just wanting to change resolution.
3. Wanting to change builds completely from say, Donut to Eclair.
Also, I understand that you can backup your data.img. But how do you go about reusing it if you are wanting to go back to a version of Android you've used in the past?
Lastly, if you are moving from, say Donut to Eclair, (moving to a completely different build), must you use a backup app to take your apps, settings, ringers, wallpapers and so on, to the new build?
If someone would write a tutorial addressing these questions, I'd be forever grateful and I'd imagine it would help those who want to try Android for the first time. Having all this information in one place would really help.
Thank you so much.
Not a pro by any means, I am still trying to figure everything out myself but here is how I understand it...
To install on ext2, you need to partition your SDcard into 3 partitions, 1 FAT32 and 2 ext2. When you run haret, it will detect the partitions and ask you to "upgrade". If you choose yes, it will install on the ext2 partition. If you choose to back up your data, it will create a backup of your data.img file and then upgrade. If you press End, you have the option to wipe the data file before you install.
You can verify if it installed to the ext2 partitions by browsing your SDcard. You should not see a data.img file on your FAT32 partition and you should see a backupsystem folder with the system.sqsh file in it.
If you want to change the resolution, all you need to do is change it in your default.txt or startup.txt file.
Don't have any advice going from one build to another as I normally just wipe my data file and start over to ensure I am starting clean.
Thanks, it helped me too...
But; I made 2 partitions, 1 Fat32 and 1 EXT2. I'm running haret now, he didn't ask anything about updating... Now it hangs on a black screen, but the backlight is still on. I didn't see any linux penguin neither like the last times (without ext2).
Hi All,
I need real help with ClockworkMod Recovery. I have been installing Android on HD2 using storage card (haret.exe) method. Then I moved to NAND without any problems.
But I am not able to understand ClockworkMod Recovery at all. I looked at lots of threads and also the main thread for ClockworkMod Recovery. I know how to install it. I have installed it on my phone. But for some reason I was stuck in the loop after installing the ROM {[22 JAN] -=MDJ's CyanogenMod 7 v. 2.6 [A2SD+][GRH78C][RMNET][Kernel: MDJ S10.4 OC]}. I did exactly same as the video tutorial says. My radios and HSPL is fine. Coz I am able to use the same ROM in NAND mode. But still in ClockworkMod Recovery mode the phone kept restarting and never got to the main screen.
I also do not know what ext2, ext3, ext4 partitions are. Do I need to make them before installing the ROM? Also on the main thread for ClockworkMod Recovery, it has 3 partition files. 250MB, 350MB and 450MB. I do not know what that is. Which one to use for which ROM and what are the differences between them?
What is the use of ClockworkMod Recovery if I have to flash this partitions every time I install new ROM?
Also can someone tell me what backing up the ROM means? Does it mean I can back up my current one and flash new one, and if I do not like the new one I can restore the old one in the same state (with my APPS and SETTINGS)?
Please please help me with ClockworkMod Recovery fundamentals. I would really appreciate it.
One more thing, I would not post a question if I haven't looked around enough for answers. As you can see I have been doing this from months, but only asked one question before and this is the second one. So please do not take me for someone who does not look around for answers. I do, its just that I did not find anything real good to explain me from the bottom. So please someone help me out.
Thanks in advance.
EXT partitions can be thought of as extended partitions on your SD card. They are used to "extend" your storage capacity. Some ROMS place some of the ROM files on the SD-EXT partition. This is done particularly for the EU HD2 where it has only half the storage on-board that the TMOUS HD2 does. If you are using a ROM that requires one you do have to create the partitions before installing/flashing the ROM.
The three different flash.cfg files on the CWM thread are files used to instruct DFT how to re-partition your on-board storage (NAND). There are several partitions, up to 16 at the moment. Some ROM's use 4 partitions, some use 6 or more. Typically, non-CWM ROM's use only 4 partitions (boot, system, data, cache), whereas CWM ROM's use those same ones as well as a miscellaneous and recovery partition.
The main reason for the different files is that some ROM's use more space for the system partition. The different flash.cfg files just simply allocate more or less space to the system partition.
You don't technically have to flash new partitions every time you flash a new ROM. As long as you know how to modify the ROM to work with your current partition setup it will work. Or, get ROM's that use the same type of partition layouts. Since the release of CWM, more ROM's are becoming available for installation via the ZIP deployment method in CWM, which means they ALL use the same partition (with exception of the system partition size) setup.
If you have a TMOUS HD2 with plenty of onboard storage it's easier to just create a larger system partition and never have to worry about repartitioning. That's what I did. I have a 450 MB system partition and every time I deploy a new CWM ZIP ROM I don't have to repartition anything.
You nailed it on the head about backing up via CWM. It backs up all your partitions (boot, system, cache, sd-ext, data, etc) and saves them to your SD card. That way you can flash a new ROM or do a hard reset. Then later if you want you can do a full restore and be exactly where you left off before doing so. That is, if you flash a ROM that has the same partition layout. If you flash a ROM with a different partition layout, the restore may or may not work until you repartition the same as the original ROM was when you flashed it.
The only issue with all this is that since there isn't a set standard yet for ROM's and their partition layouts any ROM chef can define their own partition scheme which can make for a hassle when trying different ROM's. I expect that at some point there will be a standard set of partitions that will be used between all different chefs to make things easier. CWM ROM deployments and updates are definitely the future of this and how all native Android devices are handled. I imagine that will become the case down the road for the HD2 as well.
Hopefully that clears it up for you a bit. Sorry about writing a novel...
Digital Outcast said:
EXT partitions can be thought of as extended partitions on your SD card. They are used to "extend" your storage capacity. Some ROMS place some of the ROM files on the SD-EXT partition. This is done particularly for the EU HD2 where it has only half the storage on-board that the TMOUS HD2 does. If you are using a ROM that requires one you do have to create the partitions before installing/flashing the ROM.
The three different flash.cfg files on the CWM thread are files used to instruct DFT how to re-partition your on-board storage (NAND). There are several partitions, up to 16 at the moment. Some ROM's use 4 partitions, some use 6 or more. Typically, non-CWM ROM's use only 4 partitions (boot, system, data, cache), whereas CWM ROM's use those same ones as well as a miscellaneous and recovery partition.
The main reason for the different files is that some ROM's use more space for the system partition. The different flash.cfg files just simply allocate more or less space to the system partition.
You don't technically have to flash new partitions every time you flash a new ROM. As long as you know how to modify the ROM to work with your current partition setup it will work. Or, get ROM's that use the same type of partition layouts. Since the release of CWM, more ROM's are becoming available for installation via the ZIP deployment method in CWM, which means they ALL use the same partition (with exception of the system partition size) setup.
If you have a TMOUS HD2 with plenty of onboard storage it's easier to just create a larger system partition and never have to worry about repartitioning. That's what I did. I have a 450 MB system partition and every time I deploy a new CWM ZIP ROM I don't have to repartition anything.
You nailed it on the head about backing up via CWM. It backs up all your partitions (boot, system, cache, sd-ext, data, etc) and saves them to your SD card. That way you can flash a new ROM or do a hard reset. Then later if you want you can do a full restore and be exactly where you left off before doing so. That is, if you flash a ROM that has the same partition layout. If you flash a ROM with a different partition layout, the restore may or may not work until you repartition the same as the original ROM was when you flashed it.
The only issue with all this is that since there isn't a set standard yet for ROM's and their partition layouts any ROM chef can define their own partition scheme which can make for a hassle when trying different ROM's. I expect that at some point there will be a standard set of partitions that will be used between all different chefs to make things easier. CWM ROM deployments and updates are definitely the future of this and how all native Android devices are handled. I imagine that will become the case down the road for the HD2 as well.
Hopefully that clears it up for you a bit. Sorry about writing a novel...
Click to expand...
Click to collapse
Amazing explanation. Thanks a lottt man. Just one more question, I have TMOUS HD2 abd I did the same thing as you said. 450MB of partition. And then tried to install the MDJ's CM7 ROM. I got the message saying the ROM is successfully installed. and then I rebooted my phone. But it kept rebooting itself. Any particular reason you know of?
jalshah05 said:
Amazing explanation. Thanks a lottt man. Just one more question, I have TMOUS HD2 abd I did the same thing as you said. 450MB of partition. And then tried to install the MDJ's CM7 ROM. I got the message saying the ROM is successfully installed. and then I rebooted my phone. But it kept rebooting itself. Any particular reason you know of?
Click to expand...
Click to collapse
Is this using the 400 MB flash.cfg file from the CWM thread? The reason I ask is that I checked that flash.cfg file and the boot partition is flagged as the bootable partition. I'm not familiar with the CM7 ROM from MDJ, but is it set to deploy via CWM with a boot folder in the ZIP file?
Also, have you run logcat (if you're familiar with that) while the issue is happening to see what is going on?
To be very frank I did not understand what you just told me sir. Only thing I can tell for sure is I downloaded the .zip file from the thread at http://forum.xda-developers.com/showthread.php?t=877777 . And I do not know what logcat is. I am sure you must be thinking that I am an idiot. Forgive me for my ignorance.
Google is your friend!
I'm a better one: http://wiki.cyanogenmod.com/index.php?title=Logcat
Edit: very interesting read by the way, Digital Outcast. Much appreciated!
Digital Outcast said:
Is this using the 400 MB flash.cfg file from the CWM thread? The reason I ask is that I checked that flash.cfg file and the boot partition is flagged as the bootable partition. I'm not familiar with the CM7 ROM from MDJ, but is it set to deploy via CWM with a boot folder in the ZIP file?
Also, have you run logcat (if you're familiar with that) while the issue is happening to see what is going on?
Click to expand...
Click to collapse
Thanks a lott Digital Outcast for this amazing explanation. I hope I can get the Recovery mode working. I will try some different roms and see what can be done. meanwhile if you get chance please explain me your response "Is this using the 400 MB flash.cfg file from the CWM thread? The reason I ask is that I checked that flash.cfg file and the boot partition is flagged as the bootable partition. I'm not familiar with the CM7 ROM from MDJ, but is it set to deploy via CWM with a boot folder in the ZIP file?
Also, have you run logcat (if you're familiar with that) while the issue is happening to see what is going on?"
Thanks a lott once again.
I've had a lot of success creating a bootable CM7 using the size agnostic preparation instructions. (Here) I want to keep the Nook at stock, for a variety of reasons. Anyway, I created a very nice installation on a 16gb uSD card and did a lot of work setting up LP+ and my hundred-odd android apps. (I also have an Evo 4G). I was fortunate enough to get a 32gb uSD at a great price and want to move my installation over to that. The most successful by making an image with the Win32DriveImage and flashing that back to the 32gb uSD card, which leaves a large area of un-partitioned space. I've tried a couple downloaded tools but have been unsuccessful. Is there a command I can use in Terminal Emulator to to do that? I know I can use the agnostic procedure to start from scratch, but I'd really hate to do that.
The only thing that would make starting over is if someone can point me to instructions that would allow me to have an installation that boots from uSD and has fully functional CWR and Rom Manager. I love how it works on my EVO to download and install updates with a couple clicks. (Everything I've tried there seems to mess with the core Nook).
Thanks a lot!
Rob
Use Minitool Partition Wizard, or another windows partition manager to expand the last storage partition.
LBN1 said:
Use Minitool Partition Wizard, or another windows partition manager to expand the last storage partition.
Click to expand...
Click to collapse
Thanks for the suggestion. I tried a few partition managers and run into the same problem including with MiniTool. It will start the process of expanding or copying and expanding in one step, but it will eventually say "file system error" just before it finishes. It suggests repairing the file system, but none of the tools can do this with the ext4 partition. Still trying though. Gonna give the Acronis partition manager a whirl.
bitbearmi said:
Is there a command I can use in Terminal Emulator to to do that? I know I can use the agnostic procedure to start from scratch, but I'd really hate to do that.
Click to expand...
Click to collapse
You can edit partitions with fdisk from the terminal emulator. I suggest googling, it's a pretty old school tool and isn't very friendly. You should easily be able to resize your "sd" partition with that. Actually more accurately you should be able to delete that last partition and then create a bigger one in it's place. won't keep your data, but you can just copy it over to your computer and resize, then copy back.
Another option would be gparted which comes with basically every live linux cd ever. That one can actually do true resizes and should handle ext4 partitions easily (it is a linux file system after all)
bitbearmi said:
The only thing that would make starting over is if someone can point me to instructions that would allow me to have an installation that boots from uSD and has fully functional CWR and Rom Manager. I love how it works on my EVO to download and install updates with a couple clicks. (Everything I've tried there seems to mess with the core Nook).
Click to expand...
Click to collapse
You don't need to start over. Get a new uboot.bin for your cards boot partition from here.
Then get the clockwordmod kernel and ramdisk from the zip at the end of this post. Put the uImage and uRamdisk on the sd card as uAltImg and uAltRam.
Now when you choose sd:alternate from the boot menu it will boot you into clockwork.
Thank you so much. I think that will do the trick.
..rob
ylixir said:
You don't need to start over. Get a new uboot.bin for your cards boot partition from here.
Then get the clockwordmod kernel and ramdisk from the zip at the end of this post. Put the uImage and uRamdisk on the sd card as uAltImg and uAltRam.
Now when you choose sd:alternate from the boot menu it will boot you into clockwork.
Click to expand...
Click to collapse
OK. All is well and the dual-boot solution is super-convenient. But I'm a little perplexed as to how to work with CWM in this environment. Ideally I'd like this to work just as it does on my EVO, Rom Manager lets me know there is a new version, I select it, it downloads asks if an want Gapps and backup (yes please) then it does its thing. Maybe that is way too much to ask. If so, then the main things I need to know are how to instal an updated build that I download separately? Do I just copy it to the root of the boot partition.
Sorry for being such a n00b with the nook. Its funny but I'm much more confident messing with my phone, which if bricked, is pretty catastrophic. (LOL)
The instructions for updating CM7 for the agnostic build is in the OP's post for that build.
"How to update to a new build:
put the new build you want to try on the first partition. (the name must be update-cm-*.zip or cm_encore_full*.zip or just update-*.zip)
Boot from the SDcard in the recovery mode (see above) and the new snapshot would be installed.
The partition layout would be preserved, filesystems are NOT reformatted, so your data should be safe."
Also, Easeus Partition Manager is supposed to be able to resize partitions w/o destroying data. YMMV, of course. I used it to extend ext 4 but prior to putting anything there.
Didn't have any luck with easus either, but ended up using a gparted boot which worked great. Normally I would use recovery nandroid to backup the rom before installing the updated, but when I did that by booting into alternate, I ended up backing up the nook rom to the root partition, so I think the safest thing to do is to use win32diskmanager to image the entire sd card.
ylixir said:
You don't need to start over. Get a new uboot.bin for your cards boot partition from here.
Then get the clockwordmod kernel and ramdisk from the zip at the end of this post. Put the uImage and uRamdisk on the sd card as uAltImg and uAltRam.
Now when you choose sd:alternate from the boot menu it will boot you into clockwork.
Click to expand...
Click to collapse
So, just to make absolutely sure, if I already have CM7 installed on an SD card, which I've been using as a daily driver, installing apps, downloading Kindle books, PDFs, and the like, but I want to put CWMR onto the SD card, the steps you outlined should be OK?
NOTE: I know, I know, if I'm confused I probably shouldn't be screwing around with things...But the size-agnostic SD CM7 method was so bloodless that I thought the other stuff would be pretty easy to do. For whatever reason, adding stuff like the OC kernel and CWMR has been a little confusing.
Because I'm running off the SD card (with CM7 and verygreen's agnostic card boot thing) ...
1. Do I need to be careful about flashing packages? The recovery mode will apply any ZIP that starts with "update-" -- is there a concern about dropping something in there to flash, but it tries going to the Nook's EMMC memory instead (even though I never rooted it?)
2. When I look in ROM manager, it gives the option to install CWM. Will that harm verygreen's recovery thingy? Is there any reason to install CWM on this SD install?
I guess I'm wondering how careful I should be when operating on SD card installs, of what might get accidentally written to the EMMC or what not.
I'm familiar with CWM/AMON-RA on my Evo 4G - so the "recovery" boot for the SD install is a bit strange to me (no menus, just installs any "update-*.zip" and then shuts down.
Is there harm in switching the bootloader to CWM? If I mess with that route, do I dork up the "SD"ness of it all?
When I mount the drive, I see uImage, uRamDisk, etc - are those just the binary files for bootloaders, and the like? Every now and then I see some post that says to write over the uImage or something. Just wondering what those files are.
Anyhow - I'm really just interested in knowing what this low-level stuff is, whether or not I can bork it up, or have to be careful because I'm SD-installed. The verygreen/Quinxy guides made it stupid-easy to do (burn this image, drag this zip, reboot and you're done) - and want to make sure I'm not screwing stuff up as I mess about.
Also - the agnostic boot loader that gets added -- is that amend or edify scripting?
Hi everyone!
I just got CM7 (latest stable release) installed on on external sdhc card. I have wifi issues with CM7 (and looking around the forums tells me that CM7 can be finicky with certain routers) so I would love to be able to use Nook's stock ROM (4.1.4) when I am having issues.
But, when I am on NC ROM, I don't see anything except the small boot partition on the SD and when I am on CM7, I don't get access to this boot partition. I am wondering if there is a way to either create another partition or make the currently existing partitions accessible on both ROMS so that I can share data between them.
I am a n00b without any Android experience so thanks in advance for your patient responses.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
andrandom said:
Hi everyone!
I just got CM7 (latest stable release) installed on on external sdhc card. I have wifi issues with CM7 (and looking around the forums tells me that CM7 can be finicky with certain routers) so I would love to be able to use Nook's stock ROM (4.1.4) when I am having issues.
But, when I am on NC ROM, I don't see anything except the small boot partition on the SD and when I am on CM7, I don't get access to this boot partition. I am wondering if there is a way to either create another partition or make the currently existing partitions accessible on both ROMS so that I can share data between them.
I am a n00b without any Android experience so thanks in advance for your patient responses.
Click to expand...
Click to collapse
Look in my signature for a link to my tips thread. I explain there how to make the SD media partition available to both ROMs (item B3).
leapinlar said:
Look in my signature for a link to my tips thread. I explain there how to make the SD media partition available to both ROMs (item B3).
Click to expand...
Click to collapse
*That's* the one I wanted to point them to.
leapinlar said:
Look in my signature for a link to my tips thread. I explain there how to make the SD media partition available to both ROMs (item B3).
Click to expand...
Click to collapse
Thanks.
Do you mean step #3 in Section B? I could edit it without running your script too, can't I?
andrandom said:
Thanks.
Do you mean step #3 in Section B? I could edit it without running your script too, can't I?
Click to expand...
Click to collapse
If whatever you have on emmc is rooted, you can manually edit it. If you have unrooted stock, then you need to flash the zip since without root you cannot edit those files manually. And I did mean item B3. Each item is a different topic, they are not steps. One topic does not depend on another. Just do B3 and no others if you want.
Yes, item B3. My mistake...
I should be able to do flash the zip from my current CM7 SD card's boot partition, shouldn't I?
So I put the update-stockemmc-vold-fstab-modified-for-partition4.zip file in the boot partition of the SD card, rebooted to Recovery mode and then booted to NC's stock ROM. NC is still using the tiny boot partition on the SD card as my external storage instead of the much larger CM7 partition. This was the same partition that was under 'My Files / Memory card' before I flashed so nothing has changed. I did this twice to double-check.
Am I doing this wrong?
andrandom said:
Yes, item B3. My mistake...
I should be able to do flash the zip from my current CM7 SD card's boot partition, shouldn't I?
So I put the update-stockemmc-vold-fstab-modified-for-partition4.zip file in the boot partition of the SD card, rebooted to Recovery mode and then booted to NC's stock ROM. NC is still using the tiny boot partition on the SD card as my external storage instead of the much larger CM7 partition. This was the same partition that was under 'My Files / Memory card' before I flashed so nothing has changed. I did this twice to double-check.
Am I doing this wrong?
Click to expand...
Click to collapse
Yes you are doing it wrong. You need to flash that file with a CWM card, not put in the boot partition of your SD. And since you did that, you need to re-flash your latest ROM on SD to correct your mistake. (I will edit my instructions to make it a little clearer that you use CWM to flash that file.)
I got NC stock ROM to see my SD card partition by following item A10. That is most excellent and thanks again!
Unfortunately, I no longer see the boot partition when I attach NC to my computer whether NC is running off stock ROM or CM7. My guess is that this is due to my failed attempt to flash from my CM7 SD card yesterday. Am I right?
I thought I could reverse that by copying the update-stockemmc-vold-fstab-return-to-stock.zip file to CM7's boot (and then booting to the recovery mode) but that seemed to have nothing.
If I understand your previous message correctly, I should re-do my entire SD card but... I have already spent a few hours downloading and customizing the Android apps. Is there a way to preserve all that before Win32diskimager destroys the contents of the SD card?
Is there a way to manually mount the /etc folder from a unix prompt and alter the file?
Does it even matter if I don't see boot while I attach NC to a computer? Are there any caveats to 'let it be'?
Questions, questions and more questions...
That leads me to the obvious question, is there a book that explains Android to someone who is not interested in programming it but wants to understand the architecture and design of the OS (and custom ROMs)?
Thanks for being patient with all these n00b questions.
andrandom said:
I got NC stock ROM to see my SD card partition by following item A10. That is most excellent and thanks again!
Unfortunately, I no longer see the boot partition when I attach NC to my computer whether NC is running off stock ROM or CM7. My guess is that this is due to my failed attempt to flash from my CM7 SD card yesterday. Am I right?
I thought I could reverse that by copying the update-stockemmc-vold-fstab-return-to-stock.zip file to CM7's boot (and then booting to the recovery mode) but that seemed to have nothing.
If I understand your previous message correctly, I should re-do my entire SD card but... I have already spent a few hours downloading and customizing the Android apps. Is there a way to preserve all that before Win32diskimager destroys the contents of the SD card?
Is there a way to manually mount the /etc folder from a unix prompt and alter the file?
Does it even matter if I don't see boot while I attach NC to a computer? Are there any caveats to 'let it be'?
Questions, questions and more questions...
That leads me to the obvious question, is there a book that explains Android to someone who is not interested in programming it but wants to understand the architecture and design of the OS (and custom ROMs)?
Thanks for being patient with all these n00b questions.
Click to expand...
Click to collapse
You do not need or want to re-set up the whole SD installation. Just put the same CM7 zip file back in the boot partition and boot to SD recovery. It will put the correct vold.fstab back on the SD. You will not lose any settings or apps you have already set up. (And putting the return to stock zip there was also the wrong thing to do. The vold.fstab for stock and CM7 are different. But don't worry, it will fix that too.)
You are not supposed to see the boot partition on the PC when you plug the nook in with the cable. You are only supposed to see 'emmc' and 'sdcard'. Under the original setup, your stock system thought the boot partition was 'sdcard' and that was why you saw it on your PC. Since you modified stock to see partition 4 as 'sdcard', partition 4 is what the PC sees, not the boot partition.
Most people have to physically take the card out of the nook and put it in the PC to see the boot partition on the PC. If you don't want to do that, use my script in item B4. But since you are on CM7, you will not be adding many things to the boot partition to install with SD recovery in the future. So it is probably best to leave things be.
And I don't know of any books to help you.
Sent from my Nook Color running ICS and Tapatalk
That is excellent news!
A bit of playing around with Astro tells me that I was wrong about seeing the 'CM7 SDCARD' partition when I was on CM7 ROM. I am only seeing the boot. Anyway, I am going to flash the CM7 ROM again and I am hoping it would fix everything.
Also, yes, I can see the boot partition when I put the SD card directly on my computer but I was also able to see it when I hooked up the NC to my computer via USB before I did my unintended tweaks but... I'll survive.
I'll be back after I flash. (Famous last words??)
Mission accomplished!
Thanks again for all your help.
For future reference after you alter stock's fstab... all you have to do is:
mkdir /sdcard/boot (only have to do this one time)
mount /dev/block/mmcblk1p1 /sdcard/boot (do this every time you want to put something on the boot partition)
put anything you want on boot partition in /sdcard/boot
DizzyDen said:
For future reference after you alter stock's fstab... all you have to do is:
mkdir /sdcard/boot (only have to do this one time)
mount /dev/block/mmcblk1p1 /sdcard/boot (do this every time you want to put something on the boot partition)
put anything you want on boot partition in /sdcard/boot
Click to expand...
Click to collapse
Yes, there is one big advantage to using that method. I think it allows the boot partition to be seen not only on the nook, but also on the PC when you plug in the usb.
leapinlar said:
Yes, there is one big advantage to using that method. I think it allows the boot partition to be seen not only on the nook, but also on the PC when you plug in the usb.
Click to expand...
Click to collapse
We could probably come up with a symlink to /dev/block/mmcblk1p1 to /sdcard/boot and avoid having to mount it everytime as well.
DizzyDen said:
We could probably come up with a symlink to /dev/block/mmcblk1p1 to /sdcard/boot and avoid having to mount it everytime as well.
Click to expand...
Click to collapse
Thank you Dizz, your suggestion got me to thinking and I was able to come up with an init.d bash script that does the trick. I just temporarily mounted sdcard and created the sdcard/boot directory and the mounted the boot partition to it, then unmounted sdcard so it could be mounted again by the system later in the boot sequence.
The only problem is now sdcard will not mount on the PC using UMS mass storage. Must be because of having a second mount within the mount. But it does mount with MTP. But that may be acceptable. I will test some more, including using Goo Manager tomorrow.
EDIT (6-21): Goo Manager works. But I think I have figured out why sdcard is not mounting in UMS. Once it is mounted in my script and the boot partition mounted under it, it cannot be unmounted. And since it cannot be unmounted, it cannot be mounted later by the system as vold. If it cannot be mounted as vold, it does not show in UMS. For now I think I will leave it as I have it in Rev 2 of my script (symlinking to the root directory with full r/w permissions). If people want to see the boot partition on the PC, just use my modified for CM9 NookColorUMS available in my tips thread.
Sent from my Nook Color running ICS and Tapatalk
Help!
When CM7 is running, my computer is no longer mounting any of the partitions when I connect NC to my computer via the USB cable.
If the NC stock ROM is running, my computer mounts all three partitions (MyNook..., boot and CM7SDcard) but calibre is not recognizing the external partitions for transfers.
Further, when I boot to my NC stock ROM, I am no longer seeing my SD card's contents in the NC's library.
This may have something to do with the fact that NC stock ROM seemed to have updated itself to 4.1.3.
Should I re-run the scripts again or am I missing something else?
When it was updated to 1.4.3, you lost the emmc mods. Just re-flash my zip with the CWM SD. You may have lost CWM on emmc too.
On CM7, you have to select the turn on storage button after you plug it in. It is not automatic like stock. Pull up the notification area and touch the turn on button.
Darn, I forgot about that 'USB' option under notifications. Enabling it allows me to find the partitions. I will run your scripts again when I find a spare mUSB card.
Thanks again for your help!