Can't keep usbotg working after a few mounts. I have to reboot after about3 mounts to get it too see external devices again. I have an official cable coming just in case it'sthe cable. anyone else having this issue? 3.1 3g xoom. (Sdcard external works flawlessly btw)
Sent from my Xoom using XDA App
i have had no problems with otg in 3.1. using rooted wifi xoom (BRD method).
Is there a command I can run in terminal from my tablet to reset the USB port? I hate having to reset the xoom to get it to see usbOTG devices every few times
Sent from my Xoom using XDA App
Just an update and maybe it will help someone. I updated and rooted by means other than bdr method. I just used step four. Well I didn't have constant access to usbotg and would have to reboot. I started from scratch using bdr steps 1-4 and now usbotg is working like it should.
Sent from my Xoom using XDA App
Related
So I may be getting a xoom rather soon and was wondering. Is anyone working on a recovery for this yet? I know you guys are still waiting on USB host support from Motorola but is one being developed?
Sent from my GSBv1.9 ERIS using XDA App
Koush has a working recovery but is waiting for Moto to enable the microsd slot before releasing it.
Koush, myself, and a few other folks have recovery but it is useless without the sd driver. Also, USB Host is already working. Perhaps recovery could mount USB Host though... interesting...
lol, I was thinking that when I saw the USB host mode stuff come out. Sounds like you are gonna save me the trouble of finding out if it works. I am still waiting for my cable, but that wiwiukd be awesome if it workd.
Yeah I meant the microSd slot. So should I get it? It's most likely gonna be a wifi only model. It still comes with GPS right?
Sent from my GSBv1.9 ERIS using XDA App
Why not work it to back up to the eMMC storage? Then at least we could copy it to a PC or something...
Sent from my Xoom using Tapatalk
I recently flashed Prime XL Supersonic RC3 and now can't connect my phone through usb to flash a different rom. This is driving me insane. I already tried to run RUU.exe wont let me. please help.
Usb mounting doesn't work on prime xl for some it works and others it doesn't
Sent from my PC36100 using XDA App
Download a Rom straight to the phone or try automount in the market and see if it works
Sent from my PC36100 using XDA App
Also if you have amon ra as a recovery you can go to recovery and enable Usb-ms toggle
Sent from my PC36100 using XDA App
Newest version comes with AutoMount. Use that, it works fine. Open the app, choose the setting to enable mount on plugging in, then plug your device up. Also, you can Mount as MS in recovery mode.
seems usb disk drive doesn't work in all sense 3.5 rom
Hello spent all day trying to sort an issue here.
I'm running my nexus 7 with latest jellybean update official and unlocked and rooted.
I have changed my kernel to trinity, over clocked to 1.6ghz
But heres my big issue' I don't have any USB support
So I would like to use playstion control pad and flash drives.
When I connect devices nothing happens. I have tried installing stick mount and loads other apps, with no joy. Sorry guy I,m new to this forum. I see lots of people use other devices on you tube' I can't. In have a samsund s3
I connect a cable it comes up with USB connected works well that using ps3 pad on asphalt 7 with no problems
Can any one help than in advance.
So does the Franco kernel have the USB support on ready to use. Any one have a link please.
Hi installed the Franco kernel still got no responds for USB support. Omg what is wrong. My nexus just does not see me putting g any device
To it at all'the cable works OK as I used it with my Samsung s3 and its brill
dmoxon said:
Hi installed the Franco kernel still got no responds for USB support. Omg what is wrong. My nexus just does not see me putting g any device
To it at all'the cable works OK as I used it with my Samsung s3 and its brill
Click to expand...
Click to collapse
Use this app. it requires root (assuming you have it)
https://play.google.com/store/apps/...wsMSwxLDEsImV1LmNoYWluZmlyZS5zdGlja21vdW50Il0.
You might could try the app called nexus media importer in the play store
Sent from my Nexus 7 using xda app-developers app
magick86 said:
Use this app. it requires root (assuming you have it)
https://play.google.com/store/apps/...wsMSwxLDEsImV1LmNoYWluZmlyZS5zdGlja21vdW50Il0.
Click to expand...
Click to collapse
He said he's already tried it.
Have you got SuperSU to grant super user access to devices?
As StickyMount needs superuser permissions to function.
If you don't have SuperSU, download it, configure it and then try to manually run StickyMount, it should ask you to grant it superuser permissions, do this and your good to go.
If you've already done this, I've seen people removing stickymount, clearing all the data/cache etc, delete it from superSU list and then re-install StickyMount, re-grant it superuser and you should be good to go !
I confirm loss of OTG support with 4.1.2 - I downgraded to 4.1.1. and recovered OTG support.
This is a bad update....
Stock kernel on both...rooted...using USB mass watcher with OTG but tried others on 4.1.2 to no avail...
Ehud
Mine has OTG support with stock 4.1.2, though only intermittently. I traced the problem to the OTG cable. Something is loose in the female usb head because it stops working whenever I lightly touch it and starts working again when I push the cable deeper into the plastic cover.
Maybe something similar is happening to yours.
Rooted, stock kernel, 4.1.2 OTA: I still have full OTG-usb support with Stickmount. I just now viewed some pics on a flash drive and copied a file to the external drive.
Groid said:
Rooted, stock kernel, 4.1.2 OTA: I still have full OTG-usb support with Stickmount. I just now viewed some pics on a flash drive and copied a file to the external drive.
Click to expand...
Click to collapse
Which ROM are you using?
Rooted, stock rom, stock kernel, now 4.2.1, cwm recovery, stickmount. OTG works perfectly for read/write and streaming media.
4.2.1 , no OTG-USB!!! what's wrong
Are you rooted and using the current stickmount app? The storage media should be FAT32. Some cables may not work. Maybe try with a wireless mouse receiver.
Edit: Just saw your other thread. Sounds like you are doing the right things. Did stickmount ask for root access?
It might be your otg cable
For some users, the app appears not to work, while in fact it is the device itself or the cable not working. One OTG cable is not the other OTG cable. If you have a USB stick with a light on it, it should light up when you connect it to the Galaxy Nexus using your OTG cable. If it does not, either your cable or your Nexus is faulty. 99 out of 100 times it is going to be your cable. That the cable works fine with another device does not mean anything! Cables known to work on a one devices may not work on another device.
Click to expand...
Click to collapse
Yes it did .. Not sure about the. Cable but can anyone confirm that it works on 4.2.1?
Sent from my Nexus 7 using xda app-developers app
OTG working perfectly for me on paranoid android 2.99 rom
Hi guys. Everytime i use usb OTG, i unmounted it, i'll get a freeze n reboot afterwards. How to solve this problem? TQ..
Please provide a little more information. I'm stock-rooted, 4.2.1, cwm recovery, stickmount pro. It works perfectly. Do you unmount it by pulling down the notification bar and touching Stickmount to unmount before you unplug the cable?
Sorry.. im using smooth custom ROM, rooted,unlocked.. i did both but still freeze after i unplugged the flash drive..
Sent from my Nexus 7 using XDA Premium HD app
I'm having the same issue myself. Stick Mount was working fine for months and then this happened. I remembered that I recently updated to PD 2.99 Beta 8. This version actually shows USB storage under your system settings. I couldn't get that to work by itself and it is probably due to the kernel I am currently using. Ill have to test a few out. So I'm thinking with the updated rom's USB support running together with Stick Mount might be causing some problems too. There's my 2 cents.
I just got my Asus Nexus 7 today and i have a problem. First thing i did is connect OTG cable to it and i was suprised when keyboard didn't work. After that i rooted my tablet with motochopper script and i verifyed it to work. Since i saw most of people use StickMount i downloaded it and when i started it it did not ask for root which was weird for me. I conenneced my USB flash device to OTG cable and pressed mount but nothing happened. My USB device is formated to FAT32 primary partition. I also tried with some other USB flash devices and only thing i noticed is that on one of them light blinked but nothing happened. I also tried with some other mounters but nothing happened. I can confirm that there is new USB connection when i connect OTg cable (lsusb). I can confirm this cable works becouse i tested it with Galaxy S II and it worked. Please, help.
ROM: Stock
Bootloader not unlocked
ROOTED: Yes
BusyBox: latest & all tools symlinked
Some otg cables work with some devices, but not others. You need to make sure that your cable is compatible with the Nexus 7. Can you share the link where you bought yours from?
Sent from my Nexus 7 using xda premium
nemanjan00 said:
/snip
Click to expand...
Click to collapse
Are you also running the stock kernel?
Rirere said:
Are you also running the stock kernel?
Click to expand...
Click to collapse
I fixed this problem. It’s cable problem. Try anyway.
Rirere said:
Are you also running the stock kernel?
Click to expand...
Click to collapse
Stock kernel would make no difference, as it is compatible with an ext kb right out of the box.
Sent from my Nexus 7 using xda premium