Database Users

[Q]Update fixed Clockworkmod isn't working

Update fixed the SD was broken I don't exactly know why but it explains everything so thanks for all your help and sorry for not being very
clear.
Hi I'm having issues with clockworkmod.
See the problem is while trying to flash cyanogen mod I was getting the endless loop so I kept
at it until I managed to flash it. The problem is I flashed Cm6.1.0 so easy fix right? Well I thought so too until clockworkmod wouldn't find the zip. So I tried nandroid and it again couldn't find any zip so I checked the partitions menu and clockworkmod had mounted the
Sd card and the cache. So I unmounted both and still nothing so I looked at the setting's again and it remounts the cache and sometimes the Sd card. Well my problem is worsened by
the fact that the version of cyanogen mod that did flash doesn't have the market or flash.
Any help will be welcome. HTC aria.

place name here- said:
Hi I'm having issues with clockworkmod.
See the problem is while trying to flash cyanogen mod I was getting the endless loop so I kept
at it until I managed to flash it. The problem is I flashed Cm6.1.0 so easy fix right? Well I thought so too until clockworkmod wouldn't find the zip. So I tried nandroid and it again couldn't find any zip so I checked the partitions menu and clockworkmod had mounted the
Sd card and the cache. So I unmounted both and still nothing so I looked at the setting's again and it remounts the cache and sometimes the Sd card. Well my problem is worsened by
the fact that the version of cyanogen mod that did flash doesn't have the market or flash.
Any help will be welcome. HTC aria.
Click to expand...
Click to collapse
With CM 6, the Market is in the GoogleApps zip which must be installed after the ROM.
Also Flash 10.x does not run on the Aria; the CPU is not supported by Adobe.

Well clockworkmod won't find any zip not even nandroid and so my problem deepens so now can't get the market crap.

place name here- said:
Well clockworkmod won't find any zip not even nandroid and so my problem deepens so now can't get the market crap.
Click to expand...
Click to collapse
Some of your terminology in your post is very confusing. First of all, ClockworkMod will only find ZIP files that are copied to the root directory of your SD card. If you copied them to a folder on your SD card, CWM will not find them.
Second, Nandroid is a backup and restore utility and it does not use ZIP files. It creates backup folders on the SD card under /clockworkmod/backup and contains image files of the various partitions on your phone.
So what is the exact state of your phone? You stated that you have flashed CM 6.1? If you boot your phone normally, does CM 6 start up and are you able to use your phone? In order to install gapps.zip file to get the Market app, copy the gapps.zip file to the root of your SD card and see if ClockworkMod can install it. BTW, in CWM you are select "install zip from sdcard" and then "choose zip from sdcard", right?

tpbklake said:
First of all, ClockworkMod will only find ZIP files that are copied to the root directory of your SD card. If you copied them to a folder on your SD card, CWM will not find them.
Click to expand...
Click to collapse
Not true, you can install ZIP files from any directory.

drumist said:
Not true, you can install ZIP files from any directory.
Click to expand...
Click to collapse
+1. I keep all my zips in a subdirectory on my sdcard.
Sent from my cm6.1 Aria using XDA App

drumist said:
Not true, you can install ZIP files from any directory.
Click to expand...
Click to collapse
CallMeAria said:
+1. I keep all my zips in a subdirectory on my sdcard.
Sent from my cm6.1 Aria using XDA App
Click to expand...
Click to collapse
Thanks for correcting my misinformation. I guess the root location only applies to "update.zip", right?

Yup. And it actually must be named "update.zip"

Oh crap I just formated the boot partition and now my phone won't boot at all!
It still won't find any zip. What now? Is there any way to restore clockworkmod?

place name here- said:
Oh crap I just formated the boot partition and now my phone won't boot at all!
It still won't find any zip. What now? Is there any way to restore clockworkmod?
Click to expand...
Click to collapse
Mount sdcard in clockwork and transfer from PC then reboot recovery and choose the zip
Sent from my Liberty running CM7

that's my problem i can load many zip files but it won't find any of them.
it just keep's saying no files found.

place name here- said:
that's my problem i can load many zip files but it won't find any of them.
it just keep's saying no files found.
Click to expand...
Click to collapse
Are you copying the zip files from your PC to the sd card? Have you tried downloading a ROM zip file directly to your SD card using your phone's browser?

I have exactly the same problem...Clockwork will not see any .zip files....even tried mounting usb storage from cwm, it mounts and the zips are there, yet it can not find any of them when i try to find them (all are in the root of the sdcard)...any ideas?

So if you pick "choose zip from SD" you can't manually pick a zip?
Sent from my Liberty using XDA App

Found a solution:
1. Get SD card formatter from HERE
2. Plugin your phone (as USB drive), start up the application and format the card (default options selected) NOTE: backup your SD card to your PC first (obviously)
3. Unplug the phone (or put it into charge mod, whatever)
4. The phone should now try (and fail) to mount the card...go to the SD options and format the card using the phone function
The .zip files should now be visible in ClockworkMod Recovery (it worked for me and a few others as far as i know)

[PROBLEM] Clockwordmod recovery issue

hello,
i am havin annoyin issue with clockwordmod recovery 2.x.x.x.x, it doesnt see new files on sd card.. i have tried formating sdcard from recovery but it didnt format it at all.. next i formatted sd in windows, but still.. when i log into recovery it suppouse to show the files i've uploaded onto sdcard which were; cm7, nightly 40, new radio, gapps.. but instead it shows the old files which are not on the sdcard.. the problem is more annoying because i ve notticed that after formatting system, wipping cache etc.. so now i have only acces to broken? recovery and my wf gets bootloop all the time.. please help is there any way to flash the new cm7 from pc or somehow fix the sd card and flash new cm7 and fix the recovery??
i have searched @ google but i found notting..
please help ; /
cheers,

Have u tryed using unrevoked again n updateing with Rom manager
Do u have another SD card
Sent from my HTC Wildfire using XDA App

i cant use unrevoked and rom menager because my wf doesnt load os.. i was tryin to put update.zip and load it from sd card but it says "cant open E:/sdcard/update.zip (bad) installation aborted.", ive load even file as pc49img.zip, in bootloader it says it's parsing and it looks like everything is ok but still have no updatec cmw ;/.
and no i do not have another sd card ;/

Surely borrowing an SD card from some of your close ones shouldnt be an issue? Anyway, did you try using an RUU to get back to the default state?

i;ve tried to use ruu, it only sees my phone while the htc logo but it says it's not enough charged.. i think ill try to wait until green led comes up and try it again ;/

mlotson said:
hello,
i am havin annoyin issue with clockwordmod recovery 2.x.x.x.x, it doesnt see new files on sd card.. i have tried formating sdcard from recovery but it didnt format it at all.. next i formatted sd in windows, but still.. when i log into recovery it suppouse to show the files i've uploaded onto sdcard which were; cm7, nightly 40, new radio, gapps.. but instead it shows the old files which are not on the sdcard.. the problem is more annoying because i ve notticed that after formatting system, wipping cache etc.. so now i have only acces to broken? recovery and my wf gets bootloop all the time.. please help is there any way to flash the new cm7 from pc or somehow fix the sd card and flash new cm7 and fix the recovery??
i have searched @ google but i found notting..
please help ; /
cheers,
Click to expand...
Click to collapse
Sounds like you might have partitioned your card, and now are looking at two different partitions, one from windows, one from recovery. You could try repartitioning it from recovery, to make sure that you only have one FAT partition and one EXT and that they are in the correct order.
Mine has its FAT partition on p1, and ext2 on p2.

hey mate,
could you guide me how to do it? in recovery i have;
unmount system
unmount data
unmount cache
mount sd-card
when i click on mound sd-ext it says "ERROR MOUNTING SDEXT:!"
;/
i took off the sd card and formatted it then i mount it into the device and tried to choose zip file but it was unmounted in options so it didnt show me any files, next i've mounted sd card and left sd-ext unmounted and againt its the same, it shows me the old files which dont even exist anymore, i guess it maybe something with partitionin, but how to do it? could you guide me how to make one fat and one ext ? like u have? thx in advance

I partitioned mine from a linux PC with an SD card reader attached, but it should work from recovery as well.
From the Clockworkmod recovery menu, choose advanced and then partition sd card then choose the size you want for the ext partiton, then the size for the flash partition (if any). That should set them up correctly in the correct order.

Questions/Problems don't belong in the Development section <---please click link and read....moved to general...

i've wipped cache and during wippin it said that there is no sd-ext partiotion ; / it's something wrong with clockwork but i have no idea what.. it shows only the old files that i've loaded on sd before flashing with cm7 rc-2 ;/ the weird thing is that i remember that i updated cmw do newest 3.0.5... (something like that - the orange one) and it worked fine but next when i log into recovery it shows the older version oO
i successfuly manange to update cmw, i used adb in that purpouse and now everything works fine

[Q solved] cannot mount sdcard in recovery

So this was solved by using a tool from sdcard.org to format my sdcard in a PC. Once formatted with that tool cwm started seeing correctly.
-------
I'm running 3.1 rooted
I've flashed Thor's 1.4.2 recovery.
I have two sd cards: a 2g and an 8g.
Both work when accessed on a PC and on the iconia.
Neither work in cwm so I can't flash any roms.
I have tried formatting the sdcards on two different PCs. for the 2g I tried both fat and fat32. The 8g is fat32. In every case cwm says it can't mount it.
Additionally, I can't seem to use a USB key, although that may be that i don't know how to use it.
Thanks for any help.
-Bert

When in CWM and you go to install zip from sdcard do you see any folders where you choose the zip. Just wondering if it isn't mounted already. Physical sdcard is in /mnt/external_sd
and not /mnt/sdcard.

PsychosisNC said:
When in CWM and you go to install zip from sdcard do you see any folders where you choose the zip. Just wondering if it isn't mounted already. Physical sdcard is in /mnt/external_sd
and not /mnt/sdcard.
Click to expand...
Click to collapse
Thanks for your reply. I'm prety sure It's not mounted already.
I'm attaching a screenshot to show the exact message I get when trying to browse for a zip. I get a similar message when I go to mounts and storage and try to mount the sdcard.

im bumping this because I'm really becoming concerned that the device is defective in some way.
I'm hoping that someone can give me some guidence on what I may be doing wrong.

So, brosell, did you figure out a solution? I have the exact same problem - cannot mount sdcard in recovery and I get the exact same message.
When the system is booted normally, the internal storage mounts ok as /sdcard
EDIT:
It seems CWM treats the external sdcard as /sdcard, not the internal storage. So, to flash an update, you need to place it on an external SD card

I always get that error, and I never had to mount anything using cwm, just booted it selected the zip to flash and flash. I still don't mount anything...?
And the zip goes on the external sd not the inturn

Can't format SC Card in Window. If won't mount.
Guys,
Unfortunately SD cards for Android must be formatted by Android. If the card is not properly formatted CWM can not mount it, nor can CWM format it. The best way to get it properly formatted is to put it into an Android Phone and use its format functions. There really is no way on the Icona Tab to reformat an improperly formatted card or a new formatted card. If you don't have an Android phone borrow a friends. You will know that it is properly formatted when you see a lost files folder created on the card by the Android phone formatting process. This is a common problem that many people encounter when performing their first ROM flash. If it was formatted under windows as FAT 32 you can access it and store on it in normal operation mode. But ClockWorkMod can not mount it in recovery mode. Hope this helps. Good luck.

Can mount SD card in Recovery
I should have also mentioned last night in my post here, that my experience has been that it is much easier to flash a new custom ROM from a USB thumb drive. Flashing a custom ROM from USB seems to be less problematic than from an SDCard that appears otherwise to be good and formatted with FAT32, but CWM can't mount it. You can fast format the thumb drive on Windows to clean it off. Then copy your custom .zip ROM to be flashed on to the thumb drive from within Windows then insert it into the USB port of your Icona Tab, boot into CWM recovery (I'm assuming you know how to do that so I won't go into it here.) I forget exactly where in the CWM menu it is, it might be under the CWM advanced sub-menu but it say's something to the effect of Install zip from USB. It always works for me with no problem. The advantage is that you do all your prep work on Windows and then flash from the thumb drive which I believe has an ISO standard across all platforms and usually comes already per-formatted. This is an alternative method if you can't get your SDCard properly formatted (see my previous post in this thread for how to get it properly formatted so that it will mount under CWM.) Again, good luck!

I want to cry!!
I tried re formatting! Nothing! Cmw is not on sd card! Nothing is working! Still stuck on acer start screen! Yes i am a noob! But i read alot into this stuff b4 i do it! I wish there was someone i can have come to my house and do this for me! I have tried everything!!!!!!!!!!! So frustrated!!! Someone pls help me!!!!

in CWM recovery, there are 2 options,sd and "internal sd" i think(for me atleast). i chose the internal sd and it mounts.

brosell said:
So this was solved by using a tool from sdcard.org to format my sdcard in a PC. Once formatted with that tool cwm started seeing correctly.
-------
-Bert
Click to expand...
Click to collapse
Thank You Sir! been looking for this fix for a long time

brosell said:
So this was solved by using a tool from sdcard.org to format my sdcard in a PC. Once formatted with that tool cwm started seeing correctly.
-------
/QUOTE]
thanks brosell, for the solution,
I have a 512MB SD card in the g5360, was FAT formatted. reformatting the sdcard with the tool from sdcard.org worked for me as well, afterwards it could be mounted by the stock recovery
and could install update.zip (prior to install CMW)
kr, Erik
Click to expand...
Click to collapse

CWM 5.0.26 - can't install nand roms in zip format!!! HELP

i've been running wp7. yesterday i want to install android nand rom. but when i put the option in cwm install from zip file - the error messege was generated(bad. error). He couldn't to unzip the file. i was trying to install few differnet roms, but without the success.
Any help or idea what the hell is going on?
I flashed my phone many times by android nand roms, and there was never any kind of error.
I've got the Nokia 8gb micro sd-card 6 class of speed.

Czort666 said:
i've been running wp7. yesterday i want to install android nand rom. but when i put the option in cwm install from zip file - the error messege was generated(bad. error). He couldn't to unzip the file. i was trying to install few differnet roms, but without the success.
Any help or idea what the hell is going on?
I flashed my phone many times by android nand roms, and there was never any kind of error.
I've got the Nokia 8gb micro sd-card 6 class of speed.
Click to expand...
Click to collapse
Format your sd card to FAT 32 and perform a task 29 on your phone. Re install the preferred bootloader and cwm and try again.

i did it. about 6 times. all proces.

Czort666 said:
i did it. about 6 times. all proces.
Click to expand...
Click to collapse
first make sure your using the correct 5.0.2.6 recovery for hd2
and that your flash image is big enough
copy the rom.zip ( do not unpack) to your sdcard, either through CWR mounted to usb, or use a cardreader

i am using HD2 Toolkit. Never been any problems. by cardreader or either through CWR , can't install. only messege - bad, error. every rom!! The sd is formated. as usually. i don't know what's happend:/

I'm not a rookie in flashing. it is not ordinary error. it looks like the zip file are corrupted when i am trying to install them by the CWR. After the error when i try to open it the zip file on my computer by the win rar, it tells me that, the zip is corrupted. when i download it the rom the zip was good, cause i check it.
ps. sorry for english

it is no matter what rom i want to install. I always have this messege - "e:can't open /sdcard/roms_name.zip
(bad)
installation aborted
Zip file is good before put him to sdcard. after a press choose zip from sdcard the zip file is corrupted. Maybe something with CWR?;/

Eliminate all the possibilities, if you're using MAGLDR switch over to cLK and vice-versa, and then try again.

carl1961 said:
first make sure your using the correct 5.0.2.6 recovery for hd2
and that your flash image is big enough
copy the rom.zip ( do not unpack) to your sdcard, either through CWR mounted to usb, or use a cardreader
Click to expand...
Click to collapse
u are ****ing awesome sir

Heh, I know the reason why it is happening.
When you are doing the ext partition through CWM, the whole reserved space to this partition is corrupted. That's why there is an error messege when i'm trying to install zip rom. The file is corrupted immediately, and you can't even unpack him in windows, or linux.
Right now I am using the GParted. There is no more errors, after I did the partitions using this program
ufff
Thx 4 help anyway

Step by step installation guide for nativesd method by securecrt

people who does not understand the installation method of native sd please follow these steps
create ext 4 partition of minimum 512mb
1.unzip the recovery zip file from this link (http://goo.im/devs/Xylograph/Various/Recoveries) copy zimage & intrid file from recovery and paste these files on root of your sd card
2.go to magldr menu and 2 nd option (ad sd) then press call button
3.then it will take you to recovery mode
4.flash the rom(paranoid 1.99 or 2)
5.after that your sd card will have folder called nativesd click on folder inside there will be one more folder pa
6.copy zimage & intrid files
7. before that delete the zimage & intrid files of recovery from root of your sd card
8.paste the zimage & intrid files of pa
9.reboot
THANKS TO SECURECRT,XYLOGRAPH,PHO3NIX,COTULLA,TYTUNG

Can I make a ext4 partition on my sdcard w/o PC as I've currently a company laptop only which doesn't allow to install any partition tool??
Cheers.....LinChina

LinChina said:
Can I make a ext4 partition on my sdcard w/o PC as I've currently a company laptop only which doesn't allow to install any partition tool??
Cheers.....LinChina
Click to expand...
Click to collapse
you can use PartitionWizard to make ext4 partition on sd card

anhnq said:
you can use PartitionWizard to make ext4 partition on sd card
Click to expand...
Click to collapse
he can't install that warez in his PC/ NB.
@LinChina
i think recovery(CWM) only makes EXT3 but i'm not really sure about that, your best bet is use a pc that can have those warez on it
or this, if you can place & unzip the file in your NB
3a Use the provided 4EXT recovery (NAND or SD version) to create the partitions and format them.
Click to expand...
Click to collapse
NativeSD Dual Installer v2
http://forum.xda-developers.com/showpost.php?p=31110719&postcount=2

Now I know ..but the first post is for people who don't have magldr or android on nand....SD recovery is not needed when you have cwm recovery inbuilt in magldr
Easy steps
1. Use minitool partition manager on PC to make sdext4 partition (cwm makes only ext3 ..so is not useful)
2. Copy your favorite native SD rom zip folder to SD card
3. In magldr ..go to ad recovery..install zip from SD...then follow instructions ..default path install is SD ext
4. Reboot
Enjoy
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2

Hi everyone, it only looks that I'm a new user, it's because i've never posted anything before. I have Hd2 for almost 2 years from now and like 1,5 year being passive user on XDA. Anyway I do have problems that i can't manage myself. OP asked a dumb question, only if he has Android Nand or Windows Mobile, however... nobody ever tried making it work with WP7? I've been working on it few hours and don't have a clue how to do it. I've deleted my FAT32 partition and split it into Fat32+Ext4. If EXT is logical, WPH boots and show "Storage Card not working", but if it's primary it doesn't even boot. Is there anyway to solve this thing? Any help much appreciated, thanks.

maykel. said:
Hi everyone, it only looks that I'm a new user, it's because i've never posted anything before. I have Hd2 for almost 2 years from now and like 1,5 year being passive user on XDA. Anyway I do have problems that i can't manage myself. OP asked a dumb question, only if he has Android Nand or Windows Mobile, however... nobody ever tried making it work with WP7? I've been working on it few hours and don't have a clue how to do it. I've deleted my FAT32 partition and split it into Fat32+Ext4. If EXT is logical, WPH boots and show "Storage Card not working", but if it's primary it doesn't even boot. Is there anyway to solve this thing? Any help much appreciated, thanks.
Click to expand...
Click to collapse
You can use the same link as 2 post before yours and check the section about "NativeSD Installation for Magldr NAND Android & WP7 users".
http://forum.xda-developers.com/showpost.php?p=31110719&postcount=2
@mengfei.....just downloaded and will try and feedback if succeded.......hopefully :laugh:
Edit1: Thanks a lot mengfei.....EXT4 created....now will try one of the natives sd
Edit2: "Aokp Nightly 04-09-2012" run sooooooooooo fast!!!!!
Cheers.....LinChina

^ Glad to know you got it working :highfive:

I like to try nativeSD Android roms, but with MAGLdr it runs into a deadlock as MAGLdr does not support WinMo 6.5.
Is there a way to use NativeSD? even better with multiboot?

Hi at all,
today I installed ACA NativeSD on partition EXT4 into my sd card. I copy and paste the 2, zImage, intrid file which I fund in NativeSD/ACA folder, into root of my sd card. I rebooted and when I choose Boot AS SD in MAGLDR the ROM do not boot.
What I do wrong?

eclyptos said:
Hi at all,
today I installed ACA NativeSD on partition EXT4 into my sd card. I copy and paste the 2, zImage, intrid file which I fund in NativeSD/ACA folder, into root of my sd card. I rebooted and when I choose Boot AS SD in MAGLDR the ROM do not boot.
What I do wrong?
Click to expand...
Click to collapse
you must copy the 2 files from "<SDCARD>/NativeSD/ACA" to "<SDCARD>/NativeSD" (and not to "<SDCARD>/" )
Sent from my HTC HD2 using xda app-developers app

o82239 said:
you must copy the 2 files from "<SDCARD>/NativeSD/ACA" to "<SDCARD>/NativeSD" (and not to "<SDCARD>/" )
Sent from my HTC HD2 using xda app-developers app
Click to expand...
Click to collapse
but I got already 2 file in there (zImage & intrid), do I have to relace them? Anyway if I try to set up the AD SD Dir from Magldr I do not see the NativeSD folder so will not boot anyway. I think I have problems with 4EXT but I am not sure.

eclyptos said:
but I got already 2 file in there (zImage & intrid), do I have to relace them? Anyway if I try to set up the AD SD Dir from Magldr I do not see the NativeSD folder so will not boot anyway. I think I have problems with 4EXT but I am not sure.
Click to expand...
Click to collapse
yes, you must replace the 2 files...
why you can't see the folder: check on a PC, if the folder has hidden attribute... or try to create a new folder, copy all files from the old to the new, delete old and rename new folder...
Sent from my HTC HD2 using xda app-developers app

o82239 said:
yes, you must replace the 2 files...
why you can't see the folder: check on a PC, if the folder has hidden attribute... or try to create a new folder, copy all files from the old to the new, delete old and rename new folder...
Sent from my HTC HD2 using xda app-developers app
Click to expand...
Click to collapse
ok, I will replace them.
Why I do not see the folder? I ask my self the same question and I don't know why, anyway my card is recognized and the folder is there, if will be hidden I will not see the folders, I also put different card into my hd2 with different folders and still the same. I think the 4EXT recovery make something wrong with partitions or I do.

LinChina said:
Can I make a ext4 partition on my sdcard w/o PC as I've currently a company laptop only which doesn't allow to install any partition tool??
Cheers.....LinChina
Click to expand...
Click to collapse
you may partition your sd card by this way
backup your data first, reboot into recovery, choose option 8. ad recovery => advance => partition sd card, choose your own option and wait