Hey all,
Just wondering if anyone got l2tp over ipsec using pre shared key to work on their tablet. I keep getting a bad username and password error. Server says that it was a chap authentication error. I use the username and password on my laptop without problem. I am using Astaro v8 as my vpn server.
Thanks!
Having the same problem here with Astrill, connects no problem on my Captivate....any ideas??
Before anyone thinks I'm retarded, I'd like to point out my iphone and computer connect properly.
I turned on debugging in the logs on my vpn server and the only noticable difference I can see is that the Iconia A500 sends over the password as an MD5 hash. My iphone sends it as an MS-CHAP v2. Probably why I get a bad username/pass error.
Finally got it working.
I'm not too familiar with Astrill, but on Astaro I had to require mschap-v2 authentication. Theres no option in the WebUI for that so I had to ssh into it and make the change to the configuration file directly.
Related
I'm having a problem authenticating to network shares over wifi. I don't have any problems authenticating to regular workgroup computers but in this instance I'm trying to connect to my server which is a domain controller. It appears wm6 is having problems with the authentication when using domain accounts versus regular local computer ones...
I checked the event viewer and as far as the server is concerned the login was successful but wm6 is saying login failed....
does anyone know how I might be able to connect to these shares?
thanks very much
After reading many threads and websites, I am still unable to get a solution to my issue regarding specific Wi-Fi connections on my XV6800 / HTC Titan.
My college uses a WPA Enterprise/TKIP secured network using PEAP/EAP-MSCHAPv2 authentication. It is also required that the server's certificate is not checked against a CA for validity.
My problem is that I have been unable to connect to the network.
Using the settings (Authentication: WPA, Encryption: TKIP), I can choose PEAP for Network Authentication, but hitting Properties says "Cannot log on to the wireless network. This network requires a personal certificate to positively identify you."
It will never let me connect because of that.
Now, on the other hand, I tried SecureW2 TTLS as my authentication, and in SecureW2, I setup a profile with it setup to not check the server certificate, and EAP/PEAP for Authentication method/type respectively. As well as to prompt for user credentials.
With this method, I get nothing... Also, Properties near PEAP also says the same thing about the requirement of a personal certificate.
For reference, I'm using DCD's 3.2.0 ROM with Windows Mobile 6.1.
If anyone has any experience with this, please let me know ASAP.
Thank you.
hi all ppl, i was wondering if anyone could help with setting up a vpn on my home.
the router/firewall that acts as a server is a netgear dg834g and I would like to connect my HD. i never get to connecting and the errors are:
- when i use ip address it asks for log & password. I haven't set up any log/pass in the router as there is NO possibility to do that! then i try to login as administrator (from the local PCs) and the error is "the remote party has ended this connection." same thing if i leave both fields blank.
- when i use the dyndns alias everything happens the same way but the error msg i get then is "VPN server problems. Verify your username and password, and try again etc etc".
note that i have setup both machines to use ipsec with a pre-shared key which is typed correctly (it seems to be recognized/accepted by the router)
am i missing something stupid here or simply my router does not support winmo ?
any help/tip will be highly appreciated. thanks!
check the mac address filtering tables, or try to experiment with different authentications mode.
I was wondering if anyone was using OpenVPN with CM7 here, and if so -- are you able to successfully use the extra arguments area to set --tls-auth arguments?
I have my key for TLS auth stored in a folder called openvpn on my SD card...
I am using:
--tls-auth /mnt/sdcard/openvpn/static.key 1
in the additional arguments section.. Ive done MD5 compares between the server static.key and whats on the phone, and they are identical.. The server is OpenVPN running on TomatoUSB, and "Extra HMAC Authorization" on the server is set to "Incoming (0)"
The configuration works fine with my laptop, but on my phone it does not seem to be picking up the option... The server log shows it attempting and throwing the error "TLS Error: cannot locate HMAC in incoming packet"
If I turn Extra HMAC Authorization off on the server, I connect fine.. The reason I am wondering if the argument is even being picked up is because if I leave it in there, and disable tls-auth on the server, it connects without complaint. From what I understand, both the server and client need to have the option set or unset, otherwise a connection cannot be negotiated.
Anyone else?
Thanks,
Rick
Hi all,
I have been tinkering with connectivity into my corporate network and so far been able to get a connection to our Office Communicator server via ASProxy and a secure wireless connection. However I am looking for a solution that works across my 3G connection via a VPN.
I have looked at the market place versions of OpenVpn and I cannot get it to work with our Cisco Gateway. I got stuck at the tun and adb part, so not sure what I need to do at this point so though I would ask the experts on here ;-) There has been much work on a very important missing part which was a user authentication proxy, so the next bit for me would be a means of connecting to an IPSec/UDP Cisco VPN Gateway that works with my Domain username and then a fob generated password.
Any help from you guys would be most appreciated and perhaps I can share my ASProxy configuration for anyone wishing to get their's working....
Thanks
Avalon
Hi,
you can't use an OpenVPN client to connect to a Cisco (IPsec) VPN server.
If you want to connect to an OpenVPN server then you can use OpenVPN Installer and OpenVPN Settings from the market.
If you want to connect to an IPsec server then use the built-in android VPN client or even some proprietary Cisco client from the market... (don't know about these as I only use OpenVPN)
Hi, thanks for the reply, however the built in VPN client will not work with our server. There is a Cisco anyconnect client that does connect, but we need a license for it which we dont currently have.
I will keep trying....