Looking to just one click and install a stable rom(cm7?) on my buddies droid x.. any of u guys know of a one click for droid x and the best available rom for droid x.. I'm not looking for fanboy roms here just want the best all around average user experience.
sent from my cm7speedy /or/ miuispeedy
noskoviak said:
Looking to just one click and install a stable rom(cm7?) on my buddies droid x.. any of u guys know of a one click for droid x and the best available rom for droid x.. I'm not looking for fanboy roms here just want the best all around average user experience.
sent from my cm7speedy /or/ miuispeedy
Click to expand...
Click to collapse
http://forum.xda-developers.com/wiki/index.php?title=File:Motorola_Droid_X.png
Check out that sticky. Has all the information you need. Hard to give an opinion without being a fanboy, so just read on up and decide for yourself. BTW, cm7 is not very stable for the droid x, so you might want to look at alternatives.
Z4root in the link. I don't think you can install cm7 on the DX due to the locked bootloader.
http://www.DroidXForums.com/forum/droid-x-hacks/13259-z4root-download-links-get-your-root-here.html
Sent from my DROIDX
I would recommend liberty or apex rom, had them both before and really liked them. Currently running the team black hat .595 rooted and deodexed. I froze all the bloat, changed the boot logo and animation too. Probably just depends on what level of customization you are happy with.
DX 2.3.3
CM7 isn't available on the DX so you're SOL on that one.
The easiest way to root is (as previously mentioned) z4root which is all done on t he phone itself, you just need to grab the .apk from the XDA forums here.
Personally I would recommend Fission over Liberty but that is only because my DX doesn't seem to always play nice with some of the Liberty tweaks. Fission 2.6.1 (Froyo 2.2.1) hasn't been updated in a while but it is very solid, very fast & has excellent battery life (when paired with SetCPU.)
If you want to go the *leaked* (meaning it isn't done yet) Gingerbread route, there is the TBH (TeamBlackHat) stock releases or you can also check out Liberty Gingerbread (which I've been running for the past couple of days). So far so good with Liberty GB but battery wise I think its better on something like Fission.
marculous said:
I would recommend liberty or apex rom, had them both before and really liked them. Currently running the team black hat .595 rooted and deodexed. I froze all the bloat, changed the boot logo and animation too. Probably just depends on what level of customization you are happy with.
DX 2.3.3
Click to expand...
Click to collapse
Did u ever get root permisions to work on titanium backup and how?... Root is workin for things like root explorer addfree amd bootstrap but I cant get root permisions on titaniumbackup?
Sent from my DROIDX using XDA App
owenbeals said:
Did u ever get root permisions to work on titanium backup and how?... Root is workin for things like root explorer addfree amd bootstrap but I cant get root permisions on titaniumbackup?
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Nevermind I figured it out apparently .595 is missing busybox... Just had to dl it from market
Sent from my DROIDX using XDA App
Gingerbreak 1.20 also roots unroots which is what I thought was needed for the .595?
Nope the deodexed .595 was rooted but was missing busybox
Sent from my DROIDX using XDA App
I've taken a quick dip into GummyJar...
Apex...
And have stuck with Liberty ever since switching to it.
Currently running liberty gingerbread 0.5 actually...and even as a beta it seems to be running flawlessly.
2.01 is on froyo, and is a stable version if you'd prefer that.
LB 2.0.1
Liberty 2.0.1 is the best user experience. Plus they have a supported and free toolbox. Z4 root works.
Ok, so I have a question for u guys if u don’t mind. My buddy has a droid x that he is wanting to flash custom roms on. I have a htc evo and I have quite a bit of experience when it comes to that phone but im completely clue less when it comes to the droid x. He has ran z 4 root and is fully rooted and has a custom recovery but he was saying something about he needed to deodex the files on his phone before he can flash a custom rom which sounds weird to me. If any one could help me help him I and he would greatly appreciate it. Thanks.
Sent from my PC36100 using XDA Premium App
Tiffany84 said:
Ok, so I have a question for u guys if u don’t mind. My buddy has a droid x that he is wanting to flash custom roms on. I have a htc evo and I have quite a bit of experience when it comes to that phone but im completely clue less when it comes to the droid x. He has ran z 4 root and is fully rooted and has a custom recovery but he was saying something about he needed to deodex the files on his phone before he can flash a custom rom which sounds weird to me. If any one could help me help him I and he would greatly appreciate it. Thanks.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
That is wrong actually...you'd only need to do that if he wanted to keep the stock ROM & just theme it. If he wants to flash a different ROM then all you'd have to do is drop the ZIP file onto the root location of the SD card & wipe cache, wipe data, wipe Dalvik and then install the ROM (like you would on any other ROM via CWM.)
JagoX said:
That is wrong actually...you'd only need to do that if he wanted to keep the stock ROM & just theme it. If he wants to flash a different ROM then all you'd have to do is drop the ZIP file onto the root location of the SD card & wipe cache, wipe data, wipe Dalvik and then install the ROM (like you would on any other ROM via CWM.)
Click to expand...
Click to collapse
Exactly. That's what I was thinking. I tried telling him that the stock rom would have to be deodexed in order to flash a theme but since he was fully rooted and he had a custom recovery he should be able to flash a rom but he wasn't listening. So thank u so much for responding. I really appreciate it. I guess since im a chick he thinks I don't know what im talking about. Thanks again.
Sent from my PC36100 using XDA Premium App
Tiffany84 said:
Exactly. That's what I was thinking. I tried telling him that the stock rom would have to be deodexed in order to flash a theme but since he was fully rooted and he had a custom recovery he should be able to flash a rom but he wasn't listening. So thank u so much for responding. I really appreciate it. I guess since im a chick he thinks I don't know what im talking about. Thanks again.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Maybe you should keep him at stock and unrooted for punishment lol
Ditto.
sent from my cm7speedy /or/ miuispeedy
Thanks for all the responses guys and girl... very impressed with the support....so
cm7/miui is a no = bummer....
Fission = most stable (its at 2.2 still right?)
Liberty = most promising GB rom?
Does CWM work for the DX my buddy kept telling me he read somewhere it doesn't. Also does that fission rom flash its own recovery?
sent from my cm7speedy /or/ miuispeedy
noskoviak said:
Thanks for all the responses guys and girl... very impressed with the support....so
cm7/miui is a no = bummer....
Fission = most stable (its at 2.2 still right?)
Liberty = most promising GB rom?
Does CWM work for the DX my buddy kept telling me he read somewhere it doesn't. Also does that fission rom flash its own recovery?
sent from my cm7speedy /or/ miuispeedy
Click to expand...
Click to collapse
Fission is indeed 2.2 (2.2.1 to be exact) and (on my phone) it works fantastic...Liberty and a few others aren't as friendly some apparent reason.
Liberty is the most active I would say but b/c they do a lot of tweaks, some phones (like mine) are finicky with those tweaks. Their Froyo release (2.0.1) is solid & their (leaked) GB mod isn't half bad either.
CWM does work, you just have to apply the Droid X Bootstrap Recovery installed & run the bootstrap in the app then reboot in order to get to the CWM interface.
So that cwm business sounds annoying do I have to do that everytime? Is there a working recovery for this phone such as amon ra? As I mentioned before fission includes one correct? Can the fission recovery be used to flash other roms? Also is there a 2.3 update coming for fission?
sent from my cm7speedy /or/ miuispeedy
noskoviak said:
So that cwm business sounds annoying do I have to do that everytime? Is there a working recovery for this phone such as amon ra? As I mentioned before fission includes one correct? Can the fission recovery be used to flash other roms? Also is there a 2.3 update coming for fission?
sent from my cm7speedy /or/ miuispeedy
Click to expand...
Click to collapse
It's not as bad as it sounds to honest, it takes just as long on my wife's Dinc (running CM7.0.3) to hold down power, choose reboot then choose recovery to get into CWM. The bootstrap app is free (just gotta search online) or you can support Koush (the dev) by buying it in the Android Market ($2.00).
That's the best the Droid X can do to get into CWM b/c of Motorola locking down the bootloader. The only ROM I know of that lets you boot into recovery is Liberty *BUT* it honestly is faster using the dedicated bootstrap app.
Not sure about Fission going to 2.3 however not much has been updated on Fission since 2.6.1 (based on 2.2.1) was released but my guess is that it would however get updated to Gingerbread. GB on the DX is not *officially* out yet so all the leaks at this point are still just leaks...and all the GB-based ROMs are based on potentially unfinished leaks. It does run (really) well but it still is running a handful of Motorola services (even Liberty GB is) and I prefer as close to AOSP as possible...which is why I always go back to Fission 2.6.1.
Seeing 60-75MB of memory used (instead of 100+MB) in "running services" with (near) AOSP ROMs makes my inner OCD geek happy
Related
Im trying to set up my g/f's D2, i'm a fascinate user, rooted/ROMed/etc.... However I feel Im in a whole new world...
SBF? What does it stand for?
Root method? Im used to Odin for Samsungs.
Any suggestions on a stable rom for these phones? Ive read good things about fission.
Kernels? Ok to run stock w/ a rom, or do I need a custom?
Ive done some surfing on this forum and still looking for clear answers to these q's. Sorry for any redundancy in the forum. Thanks to all devs. And anyone who responds
Sent from my SCH-I500 DJ05/SuperDark v.09/SF 1.54 using XDA App
hbc.ciccone said:
Im trying to set up my g/f's D2, i'm a fascinate user, rooted/ROMed/etc.... However I feel Im in a whole new world...
SBF? What does it stand for?
Root method? Im used to Odin for Samsungs.
Any suggestions on a stable rom for these phones? Ive read good things about fission.
Kernels? Ok to run stock w/ a rom, or do I need a custom?
Ive done some surfing on this forum and still looking for clear answers to these q's. Sorry for any redundancy in the forum. Thanks to all devs. And anyone who responds
Sent from my SCH-I500 DJ05/SuperDark v.09/SF 1.54 using XDA App
Click to expand...
Click to collapse
SBF is a recovery file. You use it to flash your phone back to stock when you foobar it.
Root method? Go to Droid 2 Development and it is stickied. It is DORoot or Easier 1-2-3 Root method.
All the ROM's are pretty solid. I use Fission, but ApeX and GummyJAR are also excellent. If you check out my website, www.kimete.com/video.html, there are review videos of all three.
Kernels. You can't do anything with kernels to the D2 at the moment. Locked bootloader...
There's Droid Overclock for overclocking. I highly recommend the recently released Liberty rom. Flashing roms on the D2 will be different from what you're used to because of the locked bootloader so follow the directions to the letter. It's not difficult, just different.
Sent from my DROID2 using XDA App
Yeah definitly get the sbf. Its beena life saver for me a couple of times now. Be sure to get the 2.3.20 sbf though.
Liberty is hands down the best rom for d2, and that's saying something because its only been out a couple of days now.
The droid overclock app is awesome. Its only $1.50 from the market and worth every penny. Loads of features.
Sent from my DROID2 using XDA App
Hey XDA, relative noob here.
Currently running Liberty 1.5. With the donate Liberty toolbox can I go straight to the liberty gingerbread update? Or do I have to go through Liberty 2.0 then 2.0.1? Also, does the gingerbread liberty update include D2 bootstrap or do I need to get that now?
Thanks in advance.
Short answer....yes. There are basically 2 files located in their "Nightlies" ROM list. The first, "Full Install", is for users on Froyo (I'm sure that includes users that are running ROMs other than Liberty on Froyo). This .zip file will not only get you Liberty Gingerbread, but also get you updated to 2.3.3 (Gingerbread). The second is for users on the leaked Gingerbread. Hope this answers your question.
By the way, DX Bootstrap will work on Gingerbread. You should have to go to Settings/Applications/Development and uncheck "USB debugging".
So it won't matter what version of Froyo liberty I have? I can just flash straight to GB?
That is correct. First file, "Full Install", will get you both Gingerbread AND Liberty. Second file will get you Liberty for users already on leaked Gingerbread.
You are a saint my good man.
One last question, does the toolbox automate the process after the zip file is downloaded or will I have to go through clockwork manually and wipe data/cache and install zip?
I think it does take you through the process. However, I would install it manually, going through ClockworkMod Recovery (Bootstrap). Also, "wipe data/factory reset" 5 times then install from SD Card. It's always a good idea to do this to clean the heck out of the phone. Especially since you're upgrading to Gingerbread via a .zip file. Just talking from experience. Hope everything goes well.
By the way, it might take a while for the phone to boot, so make sure your phone is fully charged and give it like 10 minutes after it goes into the boot animation. Hope this helps.
If I already have rooted GB and I want to install Liberty, I will still be rooted after I install liberty correct?
Yes. In fact, that's how I installed it to try out the ROM. I was on the pre-released gingerbread, rooted, without any ROM. Then installed the 2nd file located in their 'nightlies'. It's ok, but I like Broodcomb 2.0. I'm sure once Liberty is fully up and running in Gingerbread, I'll switch over.
Sent from my DROIDX using XDA Premium App
Make sure u are prepared to sbf...liberty gb soft bricked an attempted update from liberty 2.1 the first time around.
Sent from my HTC Vision using XDA Premium App
By the way, DX Bootstrap will work on Gingerbread. You should have to go to Settings/Applications/Development and uncheck "USB debugging".[/QUOTE]
I was wondering why I could not do a back-up. Every time I tried to get to recovery I would have to pull or even once sbf. Thanks amzing how much info if you dig.
Hmm, not sure. I've been on Gingerbread now for a couple days without any issues backing up my data. Sorry to hear you're having issues. If anyone out there is having issues running Droid X Bootstrap on leaked Gingerbread, please respond.
I've gone from Liberty 1, Liberty 1.5, to 2.0, and now, Liberty GBv0.1
Absolutly STUNNING rom. It's continued to be the best ROM I've come across. Each update that comes brings with it a smoother experience. I love my Droid X like I love getting a new phone each time.
Amazing work by the Liberty team!
The only issue I had with DX Bootstrap was during the actual installation of Gingerbread. It bricked my phone both times I used DX Bootstrap, but when I used D2 Bootstrap it worked perfectly.
Ok. I am a huge liberty fan but I went to the GB leak as soon as it was rooted. I would really like to go ahead and get back to Liberty GB but I have a question. I have never updated to the. 588 build. I am still running the. 573 build. Is the new Liberty GB compatible with that version?
Sent from my DROIDX using Tapatalk
Good question. The Liberty ROM Manager doesn't state specifically which version of Gingerbread you need to be on. So, with that said, I can't imagine that it would matter between .573 and .588. I'm sure what's important is that you're on Android 2.3.3. Any reason as to why you wouldn't want to jump on the latest build? I'm sure there were some fixes addressed on .588.
Just never took the time to SBF back to Froyo...... This build has been very good to me.
Sent from my DROIDX using Tapatalk
Farmer Andy said:
Just never took the time to SBF back to Froyo...... This build has been very good to me.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
Similar here...I installed the Original Rooted and Deoxed Gingerbread....Used it for a couple of weeks while trying to decide if I wanted to update to the "Official Version"...Then the Liberty Rom came out.....installed it over the Gingerbread version I had....and all was well.....I can't say enough good things about the battery life on Gingerbread....it is double what I was getting before (Liberty 1.5)...
Also fwiw...I was not able to get the Liberty Automatic install to work..I had to Manually boot up the D2 bootstrapper and do the usual process from there.
Well, to follow up on my post, I took the plunge. Its only been a few hours but everything seems to be working very well. Decided this morning to just dive in and see what happens....... And, just in case someone has the same question I did, I installed directly over .573 rooted, non-deodexed, and experienced ZERO issues with installation. Latest nightly also installed with zero issues....
Sent from my DROIDX using Tapatalk
Glad to hear everything went well. Sometimes you gotta do, what you gotta do, and play guinea pig.
so i just got my htc evo 4g got it for 99.99 thought it was a great deal so i picked it up not looking to root for some roms o.c. kernal etc.. what is the greatest and best rom and kernal running right now but for now i need some easy root methods i am currently running linux ubuntu 10.1 i don't know if that will cause problems or not i did a one click root for my optimus s earlier this year wondering what everyones best root method is i am running 2.2 baseband is 2.15.00.11.19 kernal is 2.6.32-17 software version is 3.70.651.1 i don't know if any of this makes a difference but all the help would be appreciated i need it working asap cause i have a transformer by asus and need free tethering asap
bfitzpatrickd2d said:
so i just got my htc evo 4g got it for 99.99 thought it was a great deal so i picked it up not looking to root for some roms o.c. kernal etc.. what is the greatest and best rom and kernal running right now but for now i need some easy root methods i am currently running linux ubuntu 10.1 i don't know if that will cause problems or not i did a one click root for my optimus s earlier this year wondering what everyones best root method is i am running 2.2 baseband is 2.15.00.11.19 kernal is 2.6.32-17 software version is 3.70.651.1 i don't know if any of this makes a difference but all the help would be appreciated i need it working asap cause i have a transformer by asus and need free tethering asap
Click to expand...
Click to collapse
You got lucky with a 2.2
www.unrevoked.com should work for you.
Read instructions thoroughly.
Why did I get lucky w 2.2
Sent from my PC36100 using Tapatalk
bfitzpatrickd2d said:
Why did I get lucky w 2.2
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Because there is still not a method to gain root access on 2.3
The good thing is you can root your phone.
Unrevoked has a linux tarball to root your phone http://unrevoked.com/recovery/
Once rooted, you can flash unrevoked forever to have permanent S=OFF ( and it's reversible if required) You will flash this from the custom recovery that you just installed.
Then, go get ROManager so if you want, you can use Amon_RA recovery (if you want)
what is the difference between clockwork recovery and amon_ra recovery any benifits
bfitzpatrickd2d said:
what is the difference between clockwork recovery and amon_ra recovery any benifits
Click to expand...
Click to collapse
Clockwork is compatible with Rom manager
Sent from my ADR6350 using XDA App
Any great Rom recommendations
Sent from my PC36100 using Tapatalk
bradsinram said:
Clockwork is compatible with Rom manager
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
A lot of people complain about Rom manger and cwm. Amon ra seems to work well with less problems. And roms that depends on what you like sense or asop. Newest sense is synergy(that is a team effort by the top devs) with sense 2.1 with some 3.0 mixed in( stock kernel so far on that) and as for asop I hear cm7 or kings(but that depends on personal taste).
Sent from my PC36100 using XDA App
Lucky in 2 ways. Unrevoked works much better on Linux.
bfitzpatrickd2d said:
Any great Rom recommendations
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
VaelPak. 3.2 if you want FroYo, 4.0/AOSP if you want AOSP. Link in my sig.
So for the newest OTA do the old methods still work? I assumed Unrevoked didn't and didn't see any threads.
I guess it doesn't. Oh well. No root for co-worker.
Anyone with luck flashing a Milestone X w/ a custom ROM?
Running Rooted 2.3.5 w/bloatware removed (but backed up) along w/ DROID X Bootstrapper.
Have made my first full system backup using this tool.
If complete ROMS could not be used, what components would I need to modify, replace, ... exchange to get it to work on C-Spire (say, Verizon).
I've heard that there are some ROMS that don't mess with the baseband and other communications settings, files, frequencies, protocol, etc... What are these type called if they exist? Where can I find them? Are these a safer alternative to full ROMS?
Will DX Bootstrapper get the job done? Reports ClockworkMod REcovery v2.5.0.6.
I would recommend staying off custom roms for the Milestone X until a working sbf for us makes an appearance. Myself and ngholson both had issues where we got stuck in a bootloop and the sbf just output more errors until a replacement device was needed.
Rocheforte said:
I would recommend staying off custom roms for the Milestone X until a working sbf for us makes an appearance. Myself and ngholson both had issues where we got stuck in a bootloop and the sbf just output more errors until a replacement device was needed.
Click to expand...
Click to collapse
agreed. [10chars...............
another thing to consider, since we cannot sbf at this time, is that the bootstrapper will break your ability to install any future ota updates. it modifies the logwrapper and makes a copy called logwrapper.bin, however, uninstalling the bootstrapper and restoring the logwrapper file does not correct the problem. best i can tell the only answer that i can find when this happens is to sbf back to stock... well you see where this is going.... currently we cannot do this, so unless you never want the ota upgrades i do not recommend installing the bootstrapper on cspire's milestone x.
oh well nevermind went back and re-read your post, you already have the bootstrapper installed. (at least you did it after ota)
here is a link to the post that has the sbf that is reported to work with cell south (cspire) http://forum.xda-developers.com/showthread.php?t=1117885
maybe someone else can try it again and report back.
daywalker04 said:
SBF flash for MB809 - Milestone X Generic North America
SHADO_X6_3.1.39_SHADOW_BP_C_02.06.00R_AP_BP_Flex_1E_signed_secure_dist_1ff_P3_USERBLD.sbf.gz
http://www.filesonic.com/file/11766...x_1E_signed_secure_dist_1ff_P3_USERBLD.sbf.gz
Compression MD5 - BF942D55992C774446F24B56116649A1
SBF MD5 - 2EAEBD1540D563114523BEB09539A8AF
Click to expand...
Click to collapse
abcleanonme said:
Well I can confirm it works on Cellular South.
Sent from my MilestoneX using XDA Premium App
Click to expand...
Click to collapse
I can confirm that the old sbf it does not work after ota update. I had to get a new phone. I have rooted, but I am not installing a bootstrapper until a working sbf is available. Hopefully that will happen soon.
I am on C spire out of Byram, MS and can in fact confirm that "Droid X Bootstrapper" from the market indeed works like a charm on the Milestone X with stock versions 2.2.2 and 2.3.5.
I use "Super One Click" to root, then the same prog to "Allow non market apps" then buy "Droid X Bootstrapper" from market, run it. Reboot while holding camera button and power button,,,,voila
Confirmed roms that I have and currently run or ran: CM 7 nightlies, Liberty 1.5, and Fission 2.5.7 DroidX
---------- Post added at 07:12 AM ---------- Previous post was at 06:57 AM ----------
A little trick I figured out to sbf back to stock,,,,download the latest ota from Cspire "Blur_Version.3.2.6.MB809.ACG-CellSouth.en.US" blah blah,,,,,rename it to "update.zip",,,,not "update.zip.zip"put it on the root of your sd card and boot into stock recovery or clockwork mod and run update.......BLAM! Simple as that...
Brickster said:
A little trick I figured out to sbf back to stock,,,,download the latest ota from Cspire "Blur_Version.3.2.6.MB809.ACG-CellSouth.en.US" blah blah,,,,,rename it to "update.zip",,,,not "update.zip.zip"put it on the root of your sd card and boot into stock recovery or clockwork mod and run update.......BLAM! Simple as that...
Click to expand...
Click to collapse
i tried that too it didn't work for me.
I dunno,,,, it worked for me twice. I tried to update cwm from the app using the flash for droid x and it messed up my recovery. So i updated to the latest ota from Cspire via the stock android recovery by naming the ota file to update.zip and running it like that.
I'm running CM7 nightlies for the droid x on the Milestone x....you might have to remove the line of code in the update file that asked for Kernel assert,,,,I can't remember, but seems like it kept giving me an error that says, "assert failed: run_program("/tmp/check_kernel") but after that all was fine.
Sent from my Milestone X using XDA App
Brickster said:
I dunno,,,, it worked for me twice. I tried to update cwm from the app using the flash for droid x and it messed up my recovery. So i updated to the latest ota from Cspire via the stock android recovery by naming the ota file to update.zip and running it like that.
I'm running CM7 nightlies for the droid x on the Milestone x....you might have to remove the line of code in the update file that asked for Kernel assert,,,,I can't remember, but seems like it kept giving me an error that says, "assert failed: run_program("/tmp/check_kernel") but after that all was fine.
Sent from my Milestone X using XDA App
Click to expand...
Click to collapse
is there a reason that your not using the new liberty rom and used 1.5?
tylorjefcoat said:
is there a reason that your not using the new liberty rom and used 1.5?
Click to expand...
Click to collapse
Nah, it's a cool rom .....I'm just a flash whore. I like cm7 nightlies the best though.
Brickster said:
Nah, it's a cool rom .....I'm just a flash whore. I like cm7 nightlies the best though.
Click to expand...
Click to collapse
what has been the best in your opinion? i just upgraded from the hero and was running aosp and loved it.
i actually like some of the blur apps, hard to believe that i like a custom ui on android lol.
i have been reading on the droid x vs milestone x and i am weary of flashing update that also includes the radio/baseband.
what version of cm7 nightfiles are you on? any complaints?
Brickster said:
I dunno,,,, it worked for me twice. I tried to update cwm from the app using the flash for droid x and it messed up my recovery. So i updated to the latest ota from Cspire via the stock android recovery by naming the ota file to update.zip and running it like that.
I'm running CM7 nightlies for the droid x on the Milestone x....you might have to remove the line of code in the update file that asked for Kernel assert,,,,I can't remember, but seems like it kept giving me an error that says, "assert failed: run_program("/tmp/check_kernel") but after that all was fine.
Sent from my Milestone X using XDA App
Click to expand...
Click to collapse
I am getting the exact same error. Where do I need to go to eliminate this line of code. I have setup everything else up until this point and it works perfectly with recovery and everything. A bit of help please.
thenig said:
I am getting the exact same error. Where do I need to go to eliminate this line of code. I have setup everything else up until this point and it works perfectly with recovery and everything. A bit of help please.
Click to expand...
Click to collapse
Open the ROM zip and go: META-INF/com/google/android/ and in the updater-script, remove the code that asked for Kernel assert.
tylorjefcoat said:
what has been the best in your opinion? i just upgraded from the hero and was running aosp and loved it.
i actually like some of the blur apps, hard to believe that i like a custom ui on android lol.
i have been reading on the droid x vs milestone x and i am weary of flashing update that also includes the radio/baseband.
what version of cm7 nightfiles are you on? any complaints?
Click to expand...
Click to collapse
I too just upgraded from the Hero....and I still love that phone! My hero has had every rom known on it,,,and some that weren't even made for it....It's unbrickable! LOL
Yea, the Milestone is a little more finicky than the Hero, and with Motorola's locked bootloaders, one could get in a fix..
I've ran the past 3 nightlies and currently on cm_shadow_full-154.zip.
I tell ya, they all have some kind of bug somewhere. It all depends on what you want to put up with. Me, personally, I like the stock ota 2.3.5 from Cspire. It works. Plain and simple. Now, I would like some of the CM7 options and spare parts.
Brickster said:
Open the ROM zip and go: META-INF/com/google/android/ and in the updater-script, remove the code that asked for Kernel assert.
Click to expand...
Click to collapse
Open the updater-script with notepad (new to this) and found no mention of kernel assert. Almost there...a bit more help would get me in.
It should be the top 3 lines, if I remember correctly.... I checked it out on my phone to make sure but,,,, duh, I already removed it (face palm).
It's in there somewhere.
Run install again and right down all the errors... Then try to find them in the script file.
I'm new to this also (as far as motorola stuff) too. And I take risks that most people wouldn't..... Hell, if I mess something up bad enough , just sbf back.
I'll try to help you more when I get off work... Maybe send you my roms that have already been fixed.
Make sure to turn off script and signature asserts off in cwm... Sometimes that helps.
Sent from my Milestone X using XDA App
Brickster said:
It should be the top 3 lines, if I remember correctly.... I checked it out on my phone to make sure but,,,, duh, I already removed it (face palm).
It's in there somewhere.
Run install again and right down all the errors... Then try to find them in the script file.
I'm new to this also (as far as motorola stuff) too. And I take risks that most people wouldn't..... Hell, if I mess something up bad enough , just sbf back.
I'll try to help you more when I get off work... Maybe send you my roms that have already been fixed.
Make sure to turn off script and signature asserts off in cwm... Sometimes that helps.
Sent from my Milestone X using XDA App
Click to expand...
Click to collapse
Thank you sir! I'm gonna try that.
Brickster said:
I too just upgraded from the Hero....and I still love that phone! My hero has had every rom known on it,,,and some that weren't even made for it....It's unbrickable! LOL
Yea, the Milestone is a little more finicky than the Hero, and with Motorola's locked bootloaders, one could get in a fix..
I've ran the past 3 nightlies and currently on cm_shadow_full-154.zip.
I tell ya, they all have some kind of bug somewhere. It all depends on what you want to put up with. Me, personally, I like the stock ota 2.3.5 from Cspire. It works. Plain and simple. Now, I would like some of the CM7 options and spare parts.
Click to expand...
Click to collapse
I despised that phone lol, wait i take that back, i guess i had "phone" envy lol Mine was a rom whore as well, it was rooted almost immediately after i got it with the ole gold card method.
the ota 2.3.5 is actually a good CLEAN rom, i do like the fact that it is so clean, just need a few tweaks as you said from the cm7 build, status bar tweaks ect..
may build up one.
built a rom for a tablet we are selling here, BIG learning curve but the locked boot-loader throws a real curve ball
now, have you gotten it to overclock?
Brickster said:
. Hell, if I mess something up bad enough , just sbf back.
Click to expand...
Click to collapse
that still amazes me. i haven't tried it on 2.3.5, but when i did it from stock 2.2.2 it was a no go.... maybe it will only work if you are already on 2.3? hell i dunno... motorola has me chasing my tail.... like everyone else, i came from the hero too, that was one awesome little phone. i read somewhere that the motorola bootloader had been cracked by someone on here but..... not sure what ever happened there.....
I want to flash a custom ROM onto my DX, but I'm pretty new to the game. I've rooted, and have installed ROM Manager, and Titanium backup, etc, but am a bit gun-shy about going the custom ROM route, mostly due to inexperience.
I see that CMx and Liberty are the popular ROMs for DX, but I'm not sure which is the better one to go with. It seems that CMx is feature-packed, but has battery issues. Is this true? Is there a stock Android ROM for DX out there?
Also, it seems like in some cases, like with CMx, that you have to downgrade to an earlier firmware version first. Is this still the case with DX, and is it common for flashing any DX custom ROM?
Thanks,
Mike
Check my sig sir. I recommend using that guide.
And CM7 or MIUI (Use wizards defy 2 build.)
Jubakuba, your sig link isn't working
mikecico said:
I want to flash a custom ROM onto my DX, but I'm pretty new to the game. I've rooted, and have installed ROM Manager, and Titanium backup, etc, but am a bit gun-shy about going the custom ROM route, mostly due to inexperience.
I see that CMx and Liberty are the popular ROMs for DX, but I'm not sure which is the better one to go with. It seems that CMx is feature-packed, but has battery issues. Is this true? Is there a stock Android ROM for DX out there?
Also, it seems like in some cases, like with CMx, that you have to downgrade to an earlier firmware version first. Is this still the case with DX, and is it common for flashing any DX custom ROM?
Thanks,
Mike
Click to expand...
Click to collapse
Rom flashing is a completely safe and reversible process. Before you begin flashing roms though, familiarize yourself with the SBFing process.
Cm7 doesn't necessarily have battery issues, it just doesn't get as much batter life as roms such as Vortex and Liberty. Cm7 is probably as close to AOSP as you will want to get.
You DO NOT have to downgrade for Cm7. You can, but it is not recommended unless you want to run the official nightlies (which aren't as good as the unofficial nightlies).
When you begin your foray in to rom flashing remember to always use Droid 2 Bootstrapper and never use Droid X Bootstrapper.
Sorry, I have no Idea why that darn thing isn't accepting BB code...
But either way, copy and paste will work. Or here's the link.
http://forum.xda-developers.com/showthread.php?t=1374281
Thanks guys, looks like I've got some reading for my sick day today!
Sent from my DROIDX using XDA App
It may seem slightly daunting...
But if you're anything like me...
Just jumping on in really does make it easier.
I promise you if you follow my tutorial...It isn't like most tutorials.
Remember doing the very basic PB&J tutorial in school?
Where you had to say every single step...
Get bread.
Open jar.
Dip knife in jar...blablabla.
That's how I based my tut.
It's very easy to follow!
Roms
I have tried MIUI So on and so forth. Im privy to using liquid smooth roms. For the X. http://liquidsmoothroms.com/node/1
Quick follow on question, I noticed there's a Droid X bootstrap recovery app in addition to the droid 2 one. Should I still stick with the droid 2 ones according to the guide?
Thanks again,
Mike
Whoops, sorry just reread the earlier comment about avoiding the DX bootstrap. Never mind...
So, I installed Liberty 3.0, and have been very happy. More stable, faster, longer battery life. Wish I did this months ago. Went from hating my DX on a daily basis to loving it again. It's like a new phone.
The only problem now is that Verizon's pushing out their latest update, and I don't want it. Last thing I want to see is Blur on my phone again. Is there a way to disable this update?
Don't know if Liberty take OTA verizon update, would think it would be disabled. But on stock ROM freeze updater in titanium would prevent the OTA. I just did it last week as I didn't want the latest OTA reminder continuously popping up until I know how it panned out.
Sent from my DROIDX using Tapatalk
It's just listed as "updater 2.3.3", right? Just want to make sure I freeze the right thing.
mikecico said:
It's just listed as "updater 2.3.3", right? Just want to make sure I freeze the right thing.
Click to expand...
Click to collapse
I think so. That or 'OTA Updater'.
Sent from my Transformer TF101 using Tapatalk
mikecico said:
It's just listed as "updater 2.3.3", right? Just want to make sure I freeze the right thing.
Click to expand...
Click to collapse
yes
Sent from my DROIDX using Tapatalk