Database Users

samsung vibrant soft bricked

convert data partition not enough space on partition error.. what to do

Welcome to the forums.
Tried flashing a voodoo kernel or something?
Download ODIN (below). It does not work on Macs. You will need Heimdall and can be found HERE << LINK.
HERE IS ODIN << DOWNLOAD THIS
Quote
MD5: E012B512C1579C3AF7A38A27FD905B86
TWO FILES ARE NEEDED TO LOAD IN ODIN FOR GOING BACK TO STOCK JFD (2.1 Eclair)
The PIT FILE << DOWNLOAD THIS
Quote
MD5: 1D927B36D2FA807A22E64FC86B445130
The TAR FILE << DOWNLOAD THIS
Quote
MD5: 632730F6B637F53E5B10E5CBC8B966A7
Move all files to Desktop.
- Mount your phone and move the rom to the internal (sdcard/ ) & the update.zip file (if needed)
- Power down the phone, or pull the battery.
3 - DOWNLOAD MODE
*NOTE - IMPORTANT*
On my PC, ODIN will NOT work when my camcorder is plugged in.
If you notice ODIN not working, you may pull the battery if it has not started/hung (again, at YOUR risk, not my fault/responsibility). Remove any USB devices just in case if you are worried about it, I have to.
Quote
1- Open ODIN on your PC. (DO NOT PRESS/SELECT ANYTHING IN ODIN!)
2- Plug in the USB Cable to PC
(preferably the one that came with your phone *My N1 cable doesn't work??*)
3- Power down Phone if you had not already.
4- Remove the battery.
5- Plug USB into Phone.
6- Hold down BOTH volume buttons and while holding both, insert the battery.
7- Two to three seconds later your phone will be in Download Mode.
Be mindful to not remove connection while ODIN is running.
** ALT METHOD
You can also just power down the phone, open ODIN, load the pit and tar, connect USB to pc, hold both volume buttons and connect USB to phone. This is how I do it. Some are not able to do this so the above instructions were used just in case. **
4 - ODIN
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Go back to ODIN on your PC. Should be a yellow box under ID COM, Something like COM 5. If not, likely a problem with your drivers, see this THREAD FOR DRIVERS that I created. Should help. If you were on Cyanogen or MIUI you may need the Nexus S Drivers, Google them.
Click the PIT button, Select the PIT file from desktop
Click the PDA button, select the TAR file
** Re-partition is checked now in ODIN - THIS IS APPROPRIATE!! **
Click Start. Unless ODIN hangs, you should see a progress bar start soon after. The process takes a few minutes and you told ODIN to reboot once done.... so... when your phone boots up, you are on stock JFD.
IF ODIN HANGS ON YOU:
- Are you using my files (all 3 of them?)
- Did you check the MD5 using Hashtab (LINK)?
- Are you using the cable that came with your phone?
- Have you tried other USB ports on you PC?
Credit for this guide goes to; s15274n

[Guide] Using Mobile Odin

Hey everyone i tried to search but found no step by step guide to use mobile odin to flash firmwares on samsung devices. Here i will try to make each step as elaborate as possible so fasten your seat belts and here we go...!!!
I will be using my galxy note 10.1 for refrence
First of all download appropriate stock firmware file from
http://www.sammobile.com/
Copy it to your phone storage or external card i preferably use ecxternal card
then get your self mobile odin from following link from playstore
https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro&hl=en
After installation is complete click mobile odin application icon in app drawer as shown below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After opening it will ask for root permissions as shown
After Giving root permissions it can go in 2 directions it may ask u to download a file to be able to flash in recovery or it may proceed . If it is asking to install a file u will be presented with a download option for which wifi enabling is required as shown
And it will start downloading immediatley
Now after download is Complete u will be presented with main menu window it is scroll able and provide basic options as selecting individual modem, csc etc or selecting a file
View attachment 2815248
Scroll and find option "Open File" select this option and choose ur stock firmware file location and then select firmware file
View attachment 2815249
View attachment 2815250
View attachment 2815253
After selecting proper firmware file you will be presented with a summary of ehich partiions are selected for this flash Click ok
After that as i have shown in screenshot with different coloured arrows select ur prefrences. Red ones are for rooting the firmware after flashing it, blue arrow is for mobile odin to be injected in the new frmware, green ones are for wiping options u must select both of these, at the end click yellow one to start the flash operation
View attachment 2815255
Final screenshot show after flash options whther u want to boot normally or to recovery
View attachment 2815256
Flashin will take some time after flashin is complete open up recovery while using power+up button during boot up and wipe everything and then after booting up your new rom is flashed voilaaaa.......

Thank you for this, but just in case one of you have flashed the n8000 bootloader on your n8010, and Mobile Odin sees your device as an n8000, you might need to manually download the latest version for the n8010, found in this thread here: http://forum.xda-developers.com/showthread.php?t=1347899
Sent from my GT-N8013 using Tapatalk

electrikjesus said:
Thank you for this, but just in case one of you have flashed the n8000 bootloader on your n8010, and Mobile Odin sees your device as an n8000, you might need to manually download the latest version for the n8010, found in this thread here: http://forum.xda-developers.com/showthread.php?t=1347899
Sent from my GT-N8013 using Tapatalk
Click to expand...
Click to collapse
thanks bro

Arabic Stock ROM for Samsung SM-J200G Galaxy J2 Duos LTE

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Arabic Stock ROM for
Samsung SM-J200G Galaxy J2 Duos LTE​
How To Use:
- Download The Arabic Firmware Zip.
- Extract it to get the *.Tar.md5 file.
- Run Odin3.exe
- Select the extracted *.Tar.md5 file as AP/PDA file.
- Put the phone into Download Mode.
- Connect it to PC via USB cable.
- After Odin3 detects it, Click on Start button.
- Wait until installing is done, And PASS! Word appears on Odin3 flasher.
- Done.
Download:
- J200GDDU1AOK1 v5.1.1 KitKat: Download (AFH Link). Tested

Andro-Man said:
Arabic Stock ROM for
Samsung SM-J200G Galaxy J2 Duos LTE​
How To Use:
- Download The Arabic Firmware Zip.
- Extract it to get the *.Tar.md5 file.
- Run Odin3.exe
- Select the extracted *.Tar.md5 file as AP/PDA file.
- Put the phone into Download Mode.
- Connect it to PC via USB cable.
- After Odin3 detects it, Click on Start button.
- Wait until installing is done, And PASS! Word appears on Odin3 flasher.
- Done.
Download:
- J200GDDU1AOK1 v5.1.1 KitKat: Download (AFH Link). Tested
Click to expand...
Click to collapse
@Andro-Man,
this firmware doesnt work! it stops in between , im trying to use this on J200G-ds! is there any way esle to flash it?
wbr
reytech

ReyTech said:
@Andro-Man,
this firmware doesnt work! it stops in between , im trying to use this on J200G-ds! is there any way esle to flash it?
wbr
reytech
Click to expand...
Click to collapse
At what section did this ROM stop?
And what is the details of your original phone firmware: AP + CP + CSC ?
Did you run Odin3.exe as Admin?

Andro-Man said:
At what section did this ROM stop?
And what is the details of your original phone firmware: AP + CP + CSC ?
Did you run Odin3.exe as Admin?
Click to expand...
Click to collapse
hi, it stops while flashing modem at 99%! yes i tried doing that and as well removing the extension of .md5 to make .tar and flash it as well but the same stops at modem!
the phone had indian firmware in it ver 5.1.1. i can get hold of the pc and give u more details of the firmware!
WBR
reytech.

ReyTech said:
hi, it stops while flashing modem at 99%! yes i tried doing that and as well removing the extension of .md5 to make .tar and flash it as well but the same stops at modem!
the phone had indian firmware in it ver 5.1.1. i can get hold of the pc and give u more details of the firmware!
WBR
reytech.
Click to expand...
Click to collapse
Maybe your phone's modem version is newer than the Modem inside this ROM.

Not working !!!
**** ! i tried my times !!!
after it loops into the homescreen, the super su is not there.. that means NO ROOT ACCESS
then should root again !!!
its not working !! 100 % not working !!!
i fed up !!!

Working method
i try every thing nothing worked no arabic rom no root at the end this worked
just down load this google it for link J200FXXU3AQL1_5.1.1_4File_United Arab
just flas this file with z3x AP_J200FXXU3AQL1_CL12637999_QB15972609_REV00_user_low_ship.tar
done now u have arabic in ur mobile
worked for me let me know if it work for you

How to root Samsung Galaxy S3 GT I9300 & install Cyanogenmod 13.0

ATTENTION: This lesson is for advanced users, not for people who do not understand, what is going on!!! REQUIREMENT: Basic knowledges for Windows Operating Systems!!!
--------------------------------------------------------------------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TESTED: Working without any errors and bugs.
Enjoy, Best Regards.
Steps:
1. Download Samsung driver: link, and install it.
2. Download and extract, md5 file CF-Auto-Root-m0-m0xx-gti9300: link
3. Install - run "Odin" from extracted md5 file!
4. Setup your Samsung Galaxy S3 to use usb debug mode, from > Settings > About device, tap couple of times on Build number to activate your Developers options then, activate usb debug mode!
5. Shutdown your phone, and then press volume down + home + power button, to load bootloader, after loading press volume up!
6. Connect your phone with usb cable in to your computer, and wait to displaying message from Odin software, for openly device!
7. Click on PDA button from Odin software, and load CF-Auto-Root-m0-m0xx-gti9300.tar.md5 from already done extract, md5 file.
8. Press Start button from Odin software, and wait little time...
9. After finish, the phone will to reboot automatically, and you are finished. Congratulation, you are owner on your phone!!!
---------------------------------------------------------
0. After rooted:
1. Install SuperSU
2. Install busybox
3. Install Terminal emulator - for advanced users
4. Flash with TWRP recovery, if you want repeat step 7. But you have to load TWRP file (twrp-3.0.2-1-i9300.img.tar) in to "PDA" TWRP. Press volume up + home + power button if you want to use TWRP bootloader
5. NOTE: When you decide to install custom ROM, you have to use TWRP recovery!

nu11secur1ty said:
Steps:
1. Download Samsung driver: link, and install it.
2. Download and extract, md5 file CF-Auto-Root-m0-m0xx-gti9300: link
3. Install - run "Odin" from extracted md5 file!
4. Setup your Samsung Galaxy S 3 to use usb debug mode, from > Settings > About device, tap couple of times on Build number to activate your Developers options!
5. Shutdown your phone, and then press volume down + home + power button, to load bootloader!
6.
Click to expand...
Click to collapse
Not sure but this thread is as useless as tits on a fish. Really. There are dozens of threads similar to this one. Sorry.

Root problem
Alexander_the_B0ss said:
Not sure but this thread is as useless as tits on a fish. Really. There are dozens of threads similar to this one. Sorry.
Click to expand...
Click to collapse
When I root my phone, the root checker did not root

trujulu said:
When I root my phone, the root checker did not root
Click to expand...
Click to collapse
I don't have enough time, to explain in everyone! Please look at description in the top of this post!!!
Best Regards.

Alexander_the_B0ss said:
Not sure but this thread is as useless as tits on a fish. Really. There are dozens of threads similar to this one. Sorry.
Click to expand...
Click to collapse
Yes i see, you are not sure.
BR

nu11secur1ty said:
Yes i see, you are not sure.
BR
Click to expand...
Click to collapse
Yea...
Now I am sure.

Alexander_the_B0ss said:
Yea...
Now I am sure.
Click to expand...
Click to collapse

imo its useless, on forum you can find

S6 edge SM-G925 not booting at all !

Hello,
I woke up one day, and I wanted to open my s6 edge, but did not boot up at all (black screen).... I took it to someone to fix it, he messed up (it seems he installed wrong firmware ). When i put the phone to charge it, nothing show up.
But when I link it with PC via USB, I got this photo:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I followed instruction, but the SS does not support the phone ( i followed YT Tutos )........... The only option i have now is to install fireware via Odin, but I do not know the origin of this phone ( it says only on the back made in vietnam) to install the correct on, i only rember this phone was running with android 6.
Even downloading mode does not work only if i plug the phone via USB:

Hey...
is the problem still activ?
when problem is solved...ok nice gz
if not...do the following#
1. start the phone and boot into download-mode (like in your last picture)
2. start odin (v.3.12.3) as an admin
3. download Firmware from any source you want. this is my german...https://drive.google.com/file/d/1pDybynK6_Huu-vjM_azIjgz30IIhlEAP/view?usp=sharing
4. unzip the downloadet archive
5. choose the one for BL, AP, CP and CSC in Odin
6. now connect the phone to the pc
7. in Odin you can see info that a Phone is connected at com3 or any else.
8. check every single step again
9 Press Start and pray
10. The Phone restarts automatically ( it could up to 15 mins for the first boot )
Maybe i could help you...i hope so
solong speedson

speedson said:
Hey...
is the problem still activ?
when problem is solved...ok nice gz
if not...do the following#
1. start the phone and boot into download-mode (like in your last picture)
2. start odin (v.3.12.3) as an admin
3. download Firmware from any source you want. this is my german...https://drive.google.com/file/d/1pDybynK6_Huu-vjM_azIjgz30IIhlEAP/view?usp=sharing
4. unzip the downloadet archive
5. choose the one for BL, AP, CP and CSC in Odin
6. now connect the phone to the pc
7. in Odin you can see info that a Phone is connected at com3 or any else.
8. check every single step again
9 Press Start and pray
10. The Phone restarts automatically ( it could up to 15 mins for the first boot )
Maybe i could help you...i hope so
solong speedson
Click to expand...
Click to collapse
Do you have a link for G925i? cause sammobile has a cap on download speed. Also would it be harmful if I flash g925f stock ROM on g925i?

Hello friend, did you solve the problem?

7mada said:
Do you have a link for G925i? cause sammobile has a cap on download speed. Also would it be harmful if I flash g925f stock ROM on g925i?
Click to expand...
Click to collapse
Hi buddy dont use Sammobile....there is a tool named Samfirm!!!!
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
just download samfirm v036....link is on button of the first thread...no need to follow the fw.updato.com link...there is limitation of speed like at sammobile!!!
1. unzip the downloaded archiv and start samfirm
2. Type Model....sm-g925i
3. Type Region you want!!!
4. Check Auto-Button
5. Check Nature Binary to get PIT file includet
6. Klick Button--check Update
7. crc32+decrypt automatically both should be checkt
8. press download and become bright eyes and smile in your face
good luck mate
p.s. use winrar to unzip the downloadet archive to become the 4 integrated files...BL, AP, CP and CSC

Everything working perfectly. Thanks