Related
Stop, listen. Follow my directions, if you fail to follow directions I will no longer help you. Don't PM me and ask. If you screw up ask in the thread.
Rooted Users (Non - Root Users scroll down below):
MR1 RUU
http://www.multiupload.com/KU7GSF2EY0
PG05IMG_MR1_no_hboot.zip - c64b4367086fff4f51ec3d5d766a0456
Bootloader (FLASH THIS LAST) FLASHING THIS WITHOUT SUCESSFULLY FLASHING THE ABOVE FILE WILL CAUSE A SECURITY WARNING
http://www.multiupload.com/26WG1UZCXR
abda920f3e159fb05c00d8c54a5b8768 - PG05IMG_hboot_1.4.0000.zip
Flash the above PG05IMG_MR1_no_hboot.zip to restore everything to stock + OTA BUT still will have the s-off bootloader.
Rename PG05IMG_MR1_no_hboot.zip as PG05IMG.zip, and flash through hboot (like in the root guide).
To restore the bootloader, rename PG05IMG_hboot_1.4.0000.zip as PG05IMG.zip and flash through the bootloader. DO NOT FLASH THIS unless you are absolutely sure PG05IMG_MR1_no_hboot.zip flashed to your device, without issue.
Now you are done, enjoy. If you screwed up, and got a security warning contact me, don't stress. Then again, don't screw up.
Non root users wanting to return to 1.12.605.6 (Stock, pre OTA) can continue below:
NOT FOR ROOT USERS
Taken from AndroidPolice: [Tutorial] How To "Un-Root" The HTC ThunderBolt And Return It To Stock. Please check the site out.
One of the most popular questions about rooting the ThunderBolt is how to undo the process and return to stock, which renews your eligibility for customer support. Well, here you go:
Instructions:
Please read the whole tutorial first, and pay attention to every detail. Note that your battery needs to be charged to at least 40% at the beginning of the process, and remember to check the MD5 sums of all downloaded files before diving in. As always, neither Android Police nor Team AndIRC are responsible for any damage this may cause to your phone, and, needless to say, returning to stock means you will no longer be able to use root apps like ShootMe and Titanium Backup.
First, download the following files:
Stock firmware (MD5 sum: 7141f5620f6128af77d50587e341f4b0)
exploits.zip (MD5 sum: 3b359efd76aac456ba7fb0d6972de3af)
Next, push exploits.zip and misc.img.
Code:
adb push misc.img /data/local/
adb push busybox /data/local/
adb shell chmod 777 /data/local/busybox
To gain root and flash misc.img:
Code:
adb shell
su
/data/local/busybox md5sum /data/local/misc.img
If the output is anything other than "c88dd947eb3b36eec90503a3525ae0de," stop and start over again.
Now let’s write misc.img:
Code:
dd if=/data/local/misc.img of=/dev/block/mmcblk0p17
Rename "PG05IMG_Mecha_VERIZON_WWE_1.12.605.6_Radio_1.16.00.0223r_NV_8k_1.41_9k_1.64_
release_174685_signed.zip" to "PG05IMG.zip" before placing it on your SD card.
Finally, reboot into bootloader mode by entering the following command. Allow the stock firmware to flash.
Code:
adb reboot bootloader
You’re done – your phone should now be stock, S-ON.
Bookmarking this, just in case. Thanks, Jcase!
Looks like I'll be going back to Froyo for now. I believe the Sense in GB leak is older than the stock on the device.. plus.. camera doesn't work, weather in clock widget doesn't work.. quadrant score is pretty low.. As for now.. I don't see any solid reason to upgrade to GB.. (though I wish I did).. sigh!
http://forum.xda-developers.com/showthread.php?t=1082114
Follow that to return to stock from gingerbread
I am getting No Image or Wrong Image Error In Final Step. I downloaded Stock Firmware Twice but same issue!
Can anyone help me out? I am not able to return to stock. I have BAMF remix 1.6.3 installed and trying to get back to stock as i have to send this device back to Verizon for replacement. I tried everything..file name is correct....md5 sum is correct however in final step when i tried to load the stock FW the boot-loader says wrong image!!
i downloaded stock FW from every possible source but no different!
Please Help!
If I wanted to unroot and use pre ota software? Would I have to perform both procedures or is there a way to go straight to the pre ota with s-on?
spjoneser said:
If I wanted to unroot and use pre ota software? Would I have to perform both procedures or is there a way to go straight to the pre ota with s-on?
Click to expand...
Click to collapse
Take the pre ota RUU, and make a custom ruu out of it without the hboot, and then proceed with the instructions in the first half.
jcase said:
Take the pre ota RUU, and make a custom ruu out of it without the hboot, and then proceed with the instructions in the first half.
Click to expand...
Click to collapse
First of all Jcase, thanks for the time, I know it's valuable to the community.
So just so I'm clear.... All I need to do is remove "hboot_7630_1.04.0000_110223.nb0" from the pre ota ruu or is there more to be altered than just that?
And if that's all I have to do is flash those seperate, could you tell me briefly why you could not just flash all at once? Would it not flash the rest of it if the stock hboot was installed first?
spjoneser said:
First of all Jcase, thanks for the time, I know it's valuable to the community.
So just so I'm clear.... All I need to do is remove "hboot_7630_1.04.0000_110223.nb0" from the pre ota ruu or is there more to be altered than just that?
And if that's all I have to do is flash those seperate, could you tell me briefly why you could not just flash all at once? Would it not flash the rest of it if the stock hboot was installed first?
Click to expand...
Click to collapse
Yes, because some radios seem to cause the files to flash in different orders, doing it like this keeps me from having to make multiple versions.
Sent from my LG Revolution
Question I have used the oneclick program to get ride of the NV recovery but I think im still rooted because I still see my superuser program on my stock 2.2. Can I just download Rom Manager and use clockwork Recovery to flash the Zips? I have to stock recover now which just formats the phone pretty much.
Androidfreakz said:
Question I have used the oneclick program to get ride of the NV recovery but I think im still rooted because I still see my superuser program on my stock 2.2. Can I just download Rom Manager and use clockwork Recovery to flash the Zips? I have to stock recover now which just formats the phone pretty much.
Click to expand...
Click to collapse
You need to consult the author of the program, because I don't know what it did, I can't support their application.
Sent from my LG Revolution
This flashes EVERYTHING back to stock? I have my boss tripping that his phone is bad after rooting it. I want to know if this reverts the baseband back to stock too?
AnalyzeFaith said:
This flashes EVERYTHING back to stock? I have my boss tripping that his phone is bad after rooting it. I want to know if this reverts the baseband back to stock too?
Click to expand...
Click to collapse
Reverts everything back to stock + OTA
Can I still use these steps to revert to stock after flashing the leaked Gingerbread Radio?
i am rooted and so i followed directions for first file and lost root.. so for the second file(its been forever since rooting) do i run adb commands( like step 6 for rooting) for install or can i use fastboot and bootloader? Does the second file bring root back?
Droid_ALM2ND said:
Can I still use these steps to revert to stock after flashing the leaked Gingerbread Radio?
Click to expand...
Click to collapse
yes
1234567890
droidrev71 said:
i am rooted and so i followed directions for first file and lost root.. so for the second file(its been forever since rooting) do i run adb commands( like step 6 for rooting) for install or can i use fastboot and bootloader? Does the second file bring root back?
Click to expand...
Click to collapse
Of course you lost root, this is for restoring to stock. It removes root.
jcase said:
Of course you lost root, this is for restoring to stock. It removes root.
Click to expand...
Click to collapse
well the good news is it works..the bad news is i didn't realize it was back to factory stock (like out of the box) which is very useful.. my bad.. so how do i install the bootloader file?
droidrev71 said:
well the good news is it works..the bad news is i didn't realize it was back to factory stock (like out of the box) which is very useful.. my bad.. so how do i install the bootloader file?
Click to expand...
Click to collapse
if you are S-off, you can just flash the MR1 upgrade from the root guide, otherwise you have to do a complete re-root.
All,
I have updated to 2.3.4, lost root as expected and tried to reroot 2.3.4.
I had no luck, once i ran ./Gingerbreak the script would sit and not do anything after displaying the initial text.
Has anyone successfully done this?
I thought about updating with the prerooted 2.3.4, but the devs started to add all sorts of stuff in there, and right now that is not what I am after.
Thanks!
Also anxiously waiting for a 2.3.4 root option.
- No custom boot loader means I can't use the current SU.zip process.
- I didn't unlock the boot loader on the phone and now really don't want to go through the hassle of having the phone reset when I do... too much on it.
- Can't do a nandroid backup (to unlock) because I don't have root.
Catch 22 circle. Am keeping my eyes open, hopefully someone comes up with an alternate method. Once I get root again I will unlock the boot loader after making a backup so this doesn't happen again.
51Cards said:
Also anxiously waiting for a 2.3.4 root option.
- No custom boot loader means I can't use the current SU.zip process.
Click to expand...
Click to collapse
Custom bootloader? Just unlock the one you have and flash a new recovery. It takes a whopping 3 minutes to flash recovery, then SU, and reboot. If you want to keep everything stock so you can OTA, the stock ROM will overwrite the recovery when you boot and you'll end up with rooted stock ROM with OEM recovery. If you want to then flash a custom rom, you can do so through ROM manager.
Want to unroot? Download the FRG33 passimg.zip and boot into bootloader.
This stuff is stupid easy on the N1.
ATnTdude said:
Custom bootloader? Just unlock the one you have and flash a new recovery.
Click to expand...
Click to collapse
Ok so feeling like a newb here.
First I meant 'custom recovery', not 'custom boot loader'... mixup in terms on my part.
But to put in a custom recovery I need to unlock the phone. Once I unlock the boot loader doesn't the phone reset to factory state? I had seen that mentioned several times and in the unlock video I was watching. After the phone was unlocked it went back to "Welcome to Android" etc on the next startup. Have far too much in the phone I don't wish to loose and I can't Nandroid it without root.
Thanks for the info.
I had used Gingerbreak on my 2.3.3 - after 20 seconds of searching on XDA I found that you can simply install ROM Manager, flash RA custom recovery, boot into recovery, remove signature verification, flash update.zip followed by su.zip and you keep root .... all this WITHOUT an unlocked bootloader...
I am attempting to keep my phone as stock as possible and only root to block ads and sometimes push some new app that google wont release to the n1.
I really don't want to mess with custom anything on my daily driver (used for business also). I have my g1 for that
SO....has anyone used gingerbreak successfully on 2.3.4?
Disregard. I misread the post.
MitchRapp said:
I had used Gingerbreak on my 2.3.3 - after 20 seconds of searching on XDA I found that you can simply install ROM Manager, flash RA custom recovery, boot into recovery, remove signature verification, flash update.zip followed by su.zip and you keep root .... all this WITHOUT an unlocked bootloader...
Click to expand...
Click to collapse
Yeah, the ROM manager option would have worked well before I did the OTA for 2.3.4 and lost root. I will keep it in mind for the future, thanks!
I'm sure there's a better, faster, more direct way, but here's how I went from 2.3.4 stock to 2.3.4 rooted without unlocking the bootloader.
1. Flash FRG33 as passimg.zip on SD card.
2. Flash FRG33 to GRI40 as update.zip on SD card using stock recovery.
3. Root GRI40 2.3.3 using Gingerbreak.
4. Install ROM Manager app and install Clockworkmod Recovery.
5. Open GRI40 to GRJ22 update zip file and REMOVE Recovery folder from it.
6. Boot into Clockworkmod Recovery and flash modified update.zip from step 5.
7. Install SU.zip from Clockworkmod right.
Voila! Rooted GRJ22 2.3.4 with locked bootloader. Lot of steps, but I don't think it took more than 10-15 minutes.
Exactly what I did. Works smoothly and you're all set in minutes. As long as you had root in the first place, on 2.3.3.
Sent from my Nexus One using XDA Premium App
DownloaderZ said:
All,
I have updated to 2.3.4, lost root as expected
Click to expand...
Click to collapse
This was the same lesson I learned when I rushed in with Froyo --> GRI40 update the moment it became available. I lost my root and had to wait for Gingerbreak release. Now when they release OTAs, I wait until I understand how to keep the root under the new update before accepting it. Seems like a better approach to me.
Sent from my Nexus One using XDA App
GnatGoSplat said:
I'm sure there's a better, faster, more direct way, but here's how I went from 2.3.4 stock to 2.3.4 rooted without unlocking the bootloader.
1. Flash FRG33 as passimg.zip on SD card.
2. Flash FRG33 to GRI40 as update.zip on SD card using stock recovery.
3. Root GRI40 2.3.3 using Gingerbreak.
4. Install ROM Manager app and install Clockworkmod Recovery.
5. Open GRI40 to GRJ22 update zip file and REMOVE Recovery folder from it.
6. Boot into Clockworkmod Recovery and flash modified update.zip from step 5.
7. Install SU.zip from Clockworkmod right.
Voila! Rooted GRJ22 2.3.4 with locked bootloader. Lot of steps, but I don't think it took more than 10-15 minutes.
Click to expand...
Click to collapse
I'm looking to download all the files for this so I'm set from the start. I found FRG33 here but I haven't found the GRI40 update yet (although I haven't really looked yet either, that's not my question). I'm wondering, the site I listed has FRG83 as well as 33, does it matter which to use? 33 mentions a possible error.
What's the deal?
Thanks,
I think you should be able to use FRG83 instead. All you really need is something that can be named passimg.zip installed by the bootloader itself.
I got the GRI40 update from here:
http://android.clients.google.com/p...b119f8.signed-passion-ota-102588.656099b1.zip
GRI22 update:
http://android.clients.google.com/p....signed-passion-GRJ22-from-GRI40.71d2f9ec.zip
That sucked!!! I lost all my settings and apps when I moved back to froyo?? I wasn't expecting that
Oh yeah, I forgot about that. Flashing PASSIMG.zip wipes out everything because it's a full flash.
brettbellaire said:
That sucked!!! I lost all my settings and apps when I moved back to froyo?? I wasn't expecting that
Click to expand...
Click to collapse
There is no way to downgrade Android without wiping everything, as a downgrade is only possible with leaked shipped ROMS (i.e., ROMs that re-write the entire NAND flash memory on the device...
droidexplorer said:
This was the same lesson I learned when I rushed in with Froyo --> GRI40 update the moment it became available. I lost my root and had to wait for Gingerbreak release. Now when they release OTAs, I wait until I understand how to keep the root under the new update before accepting it. Seems like a better approach to me.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I do that as well now. However I have some steps I figured out that work for me. It's more direct (only 2 flashes, plus su), but you have to pay attention. If you didn't already have a CWM backup though, it will wipe everything:
1) Flash to FRG33 using PASSIMG_Passion_Google_WWE_2.16.1700.1_FRG33_release_signed.zip (rename to PASSIMG.ZIP), takes you to 2.2
2) Root using Super-One-Click
3) Install ROM Manager and flash CWM
4) Flash b90257ed8cd3.signed-passion-GRJ22-from-FRG33-121341.b90257ed.zip, takes you directly to 2.3.4
5) DON'T LET PHONE REBOOT into Android, go to recovery then Flash su-2.3.6.1-ef-signed.zip
6) Remove/rename /system/etc/install-recovery.sh via ADB
7) If you have a recent backup, use CWM to 'advanced restore' the data portion.
8 ) Profit! (or root)
Step 5 may require explanation:
Android will reboot at least once during the flash, this is ok, as it loads right back into recovery. However after the second reboot, it will boot normally. You must INTERRUPT this boot process (hold power button, battery pull, etc). At this point CWM is still on there (don't know why, I thought flash was going to wipe it).
The reason you have to interrupt the boot process (for anyone who doesn't know) is because of the install-recovery.sh script. Stock android will automatically flash the stock recovery on bootup.
So boot into CWM, then flash su. After bootup up again, CWM will be gone, but we have root! So remove (I renamed) that file (/system/etc/install-recovery.sh), then reflash CWM using ROM Manager.
EDIT: After posting this, I had a thought: it should be possible to remove install-recovery.sh via CWM using ADB. That would remove the step of reflashing CWM a second time. I updated the step-by-step, but left the explanation as-is.
When I originally wrote these steps a few months ago, gingerbreak wasn't released. So I don't rely on it.
Just wondering, but would you always be safe and able to root by flashing SU.zip if you just never let it overwrite the custom recovery?
I thought you can always pull out the Recovery folder from the update zip file and it won't overwrite your custom recovery. Granted, that will require you to download updates manually rather than OTA, but that's easy enough.
GnatGoSplat said:
Just wondering, but would you always be safe and able to root by flashing SU.zip if you just never let it overwrite the custom recovery?
I thought you can always pull out the Recovery folder from the update zip file and it won't overwrite your custom recovery. Granted, that will require you to download updates manually rather than OTA, but that's easy enough.
Click to expand...
Click to collapse
In theory. It does seem to work for other devices (gTablet). I haven't had much luck with modifying the updater-script inside the zip file however. Whenever I change one, I get errors when I flash the zip. That's why I haven't tried that method.
I wanted to make my own flashable zips to tweak ROMs on my own, but never could get it to work, so I abandoned my work.
In addition though, you could just try to replace the recovery.img in the zip file with CWM. That might work too, as long as signature verification is off. I don't remember if I tried that.
EDIT: Forgot one key thing: Doing this won't prevent the OS from reflashing the stock back anyway on bootup (using install-recovery.sh). You MUST remove that file regardless, if you're on a stock ROM. If you want to remove that from the zip you can, but again requires updater-script changes. However if you want to OTA, then I'd recommend just renaming it, since some OTA's update that file. That way you can rename it back for the update.
On the GRI40 to GRJ22 update, I didn't have to do anything too complicated like modifying scripts. I simply yanked the Recovery folder out of the update and that seemed to do the trick with no error messages and CWM still intact.
I want to root my N7 directly from Linux, but I don't want to replace recovery with CWM. I like CWM on my phone, but I understand it won't allow OTA stock upgrades which I expect will be important for a while on the N7.
I've already unlocked the bootloader, but I haven't seen any instructions for rooting from Linux without replacing the standard recovery with CWM.
Can't you just flash CWM, root, and then reflash stock recovery?
sray1 said:
... but I understand it won't allow OTA stock upgrades which I expect will be important for a while on the N7.
Click to expand...
Click to collapse
There won't be any OTA that is not quickly (if not before it is released) will be available is a flashable download on XDA and other forums.
You are not going to miss anything.
You can as already posted, reflash the stock recovery, but again, whats the point.
rohan32 said:
Can't you just flash CWM, root, and then reflash stock recovery?
Click to expand...
Click to collapse
Where would I find the stock recovery?
Hi.
I had my nexus 4 with 4.2.2 stock rom rooted with the Nexus Root toolkit from WUG. TWRP recovery also instaled.
Last night using this software, i flash the 0.84 radio in order to install the factory image of the new 4.3 android (downloaded from google developers site).
I also did that using the Wug software.
Now i already have the 4.3 android on my nexus, but lost root and also twrp recovery. I can´t get to recovery mode and since i'm not rooted anymore, can´t flash any zip, includind the SU from chain fire.
How can i get my recovery mode back and root the phone again??? The phone is unlocked!
thanks.
Use adb to flash SU. But I've heard SU is not working well with 4.3. Find the instructions below:
http://forum.xda-developers.com/showthread.php?t=2010312
tigas68 said:
Hi.
I had my nexus 4 with 4.2.2 stock rom rooted with the Nexus Root toolkit from WUG. TWRP recovery also instaled.
Last night using this software, i flash the 0.84 radio in order to install the factory image of the new 4.3 android (downloaded from google developers site).
I also did that using the Wug software.
Now i already have the 4.3 android on my nexus, but lost root and also twrp recovery. I can´t get to recovery mode and since i'm not rooted anymore, can´t flash any zip, includind the SU from chain fire.
How can i get my recovery mode back and root the phone again??? The phone is unlocked!
thanks.
Click to expand...
Click to collapse
spicediablo said:
Use adb to flash SU. But I've heard SU is not working well with 4.3. Find the instructions below:
http://forum.xda-developers.com/showthread.php?t=2010312
Click to expand...
Click to collapse
thanks. :good:
tigas68 said:
thanks. :good:
Click to expand...
Click to collapse
Still isn't working...
When i tried to fastboot the recovery img the device turns off and never turns on again on is own!
Help please!
I like my root...!
here's the screens of waht happens.
This his what happens when i try to go into recovery mode...
first of all, dont ever use a toolkit.
1. turn phone off
2. plug the phone in via usb
3. hold volume down + power until a screen pops up.. you're in bootloader mode.
4. you better have adb / fastboot environment setup, if not then google and find out how to do it.
5. fastboot flash recovery <nameofrecovery>.img
6. volume down to recovery
7. flash superuser zip
I can confirm the SU work on 4.3 Stock ROM for TWRP I recommend to flash the CWM first and then replace with TWRP it will be easier.
zephiK said:
first of all, dont ever use a toolkit.
1. turn phone off
2. plug the phone in via usb
3. hold volume down + power until a screen pops up.. you're in bootloader mode.
4. you better have adb / fastboot environment setup, if not then google and find out how to do it.
5. fastboot flash recovery <nameofrecovery>.img
6. volume down to recovery
7. flash superuser zip
Click to expand...
Click to collapse
zephiK,
Already done that! I flashed the CWM recovery throught fastboot. The device turned off. When i turn it on again and tried to go into recovery mode, so i can flash the SU from chain fire, but got the image on my post!
The phone is unlocked!
That mean you didn't flash the CWM to your phone ~ The image you showing is Official Recovery Mode Screen!
Johnsonyc said:
I can confirm the SU work on 4.3 Stock ROM for TWRP I recommend to flash the CWM first and then replace with TWRP it will be easier.
Click to expand...
Click to collapse
I used the sctock rom downloaded from the google developers website!
Johnsonyc said:
That mean you didn't flash the CWM to your phone ~ The image you showing is Official Recovery Mode Screen!
Click to expand...
Click to collapse
What he said. The recovery flash isn't going through.
Sent from my Nexus 4 using Tapatalk 4 Beta
Why do people seem to think it's any different than with 4.2.2? It's the same bloody procedure!
Now, if you were ***** enough to use a toolkit and not learn how to use fastboot/adb yourself then that's your own fault but seriously there are guides everywhere on how to flash a custom recovery and it's the EASIEST thing in the world
spicediablo said:
Use adb to flash SU. But I've heard SU is not working well with 4.3. Find the instructions below:
http://forum.xda-developers.com/showthread.php?t=2010312
Click to expand...
Click to collapse
Google fixed the vulnerability that was used to gain superuser rights in Android. Chainfire has a semi working version of SuperSU but from what I read only TWRP can flash it properly. On Koush's Google+ feed he says Chainfire had to do a real hack job to get superuser working, thus why it's not working well. He is not sure if he can even get his own open source superuser to work again and made no mention of fixing CWM Recovery to be able to flash SuperSU. As I no longer really need root for any thing I'll just wait and see what Koush can come up with.
kzoodroid said:
Google fixed the vulnerability that was used to gain superuser rights in Android. Chainfire has a semi working version of SuperSU but from what I read only TWRP can flash it properly. On Koush's Google+ feed he says Chainfire had to do a real hack job to get superuser working, thus why it's not working well. He is not sure if he can even get his own open source superuser to work again and made no mention of fixing CWM Recovery to be able to flash SuperSU. As I no longer really need root for any thing I'll just wait and see what Koush can come up with.
Click to expand...
Click to collapse
I am flash my SuperSU from CWM it does work. I am working so hard to get off the ROOT ! But Root Explorer slap my face, I can't live without it.
kzoodroid said:
Google fixed the vulnerability that was used to gain superuser rights in Android. Chainfire has a semi working version of SuperSU but from what I read only TWRP can flash it properly. On Koush's Google+ feed he says Chainfire had to do a real hack job to get superuser working, thus why it's not working well. He is not sure if he can even get his own open source superuser to work again and made no mention of fixing CWM Recovery to be able to flash SuperSU. As I no longer really need root for any thing I'll just wait and see what Koush can come up with.
Click to expand...
Click to collapse
Yeah, I've read the same. In the meantime I've really just learned to love stock Android for what it is. At least until one of the mad geniuses finds a 100% working fix.
Johnsonyc said:
I am flash my SuperSU from CWM it does work. I am working so hard to get off the ROOT ! But Root Explorer slap my face, I can't live without it.
Click to expand...
Click to collapse
Agreed. The only main thing I need root for is to use Root Explorer. I can't believe after all the time I still use the hell out of that app. :laugh:
sn0warmy said:
Yeah, I've read the same. In the meantime I've really just learned to love stock Android for what it is. At least until one of the mad geniuses finds a 100% working fix.
Agreed. The only main thing I need root for is to use Root Explorer. I can't believe after all the time I still use the hell out of that app. :laugh:
Click to expand...
Click to collapse
I don't even really use root explorer anymore just like having the ability to make nandroid backups. But after doing a clean install of 4.3 in fastboot and it only took 30 minutes from start to finish including app and data restores nandroids to me are not that useful anymore (I don't flash custom ROMs anymore). Google automatically re-installed all my apps as soon as I reconfigured my WIFI, they also restored my APN and my work WIFI settings but not Bluetooth. And I used Helium to restore the user app data and all my texts and helium doesn't need root access to work.
Here is the start of Koush's post on Google+ where he talks about superuser on 4.3.
I finally had a chance to dig into seeing why Superuser is broken on Android 4.3. https://android.googlesource.com/platform/dalvik/+/9907ca3cb8982063a846426ad3bdf3f90e3b87c2
Basically /system is mounted as nosuid to any zygote spawned process (ie, all Android apps). Root will still continue to work via adb shell, etc.
This is a pretty nasty change. It seems that SuperSU works around this by replacing install-recovery.sh to run a su daemon that pipes subsequent through it. Pretty hacky, but understandable why it was done this way.
Will need to look into how to do this in a less invasive fashion, if that is even possible. Of course, if building from source, this change can simply be reverted.
Here's a better explanation about superuser from Android Police.
http://www.androidpolice.com/2013/0...n-but-chainfires-supersu-works-and-heres-why/
Rooting for me is used for restoring my apps and stuffs using titanium backup. Another useful thing about rooting is the ability to check saved wifi passwords.
Just install twrp from fastboot and then flash the su zip file in twrp
Sent from my Nexus 4 using Tapatalk 2
EddyOS said:
Why do people seem to think it's any different than with 4.2.2? It's the same bloody procedure!
Now, if you were ***** enough to use a toolkit and not learn how to use fastboot/adb yourself then that's your own fault but seriously there are guides everywhere on how to flash a custom recovery and it's the EASIEST thing in the world
Click to expand...
Click to collapse
@EddyOS
Your answer is what forums are not about! Instead of helping you had an atitude of an ass...!
@ Everyone else
After 5 or 6 attemps, doing it by the book, the CWD worked and i now have a Recovery mode! I didn´t did anything different, so i couldn´t really understand what went wrong before... SU from chainfire works perfectly! It´s now Rooted! And yes, the tuturials are idiot proof!
There´s something that´s bothering my mind... I can´t unistall some trash that cames with the 4.3 version using titanium backup, because he can´t find the apk files...! I could do it with the 4.2.2 version, but not with this one. I'm using the deoxed version.
Does anyone has the same problems?
Is it possible to just root my phone?
if so how do i do it?
All the posts I have seen go into unlocking and then rooting
gjjh25 said:
Is it possible to just root my phone?
if so how do i do it?
All the posts I have seen go into unlocking and then rooting
Click to expand...
Click to collapse
you will need to unlock to flash custom zip, but u can relock after
gjjh25 said:
Is it possible to just root my phone?
if so how do i do it?
All the posts I have seen go into unlocking and then rooting
Click to expand...
Click to collapse
Question - why? What do you want to root your phone for if not to use the wonderful tools of root. Why do you think fully rooting your phone will harm something. Locked or unlocked bootloader is not going to affect your phone. Rooted stock rom with recovery will not make it act funny.... Sorry not putting you out there but just asking why? Feel free to ignore me if you must...
Edit: Sorry to answer your question like the post above said you can root and then lock it right back up if that is your preference
playya said:
Question - why? What do you want to root your phone for if not to use the wonderful tools of root. Why do you think fully rooting your phone will harm something. Locked or unlocked bootloader is not going to affect your phone. Rooted stock rom with recovery will not make it act funny.... Sorry not putting you out there but just asking why? Feel free to ignore me if you must...
Edit: Sorry to answer your question like the post above said you can root and then lock it right back up if that is your preference
Click to expand...
Click to collapse
I have come from an HTC Desire, which I rooted and had a custom rom (Cyganonmod) on and was very happy with it.
I am still not sure of what I would gain by doing the same with my Nexus 4 ?
any advice is much appreciated.
Is this new Cyganonmod installer the best way to go?
gjjh25 said:
I have come from an HTC Desire, which I rooted and had a custom rom (Cyganonmod) on and was very happy with it.
I am still not sure of what I would gain by doing the same with my Nexus 4 ?
any advice is much appreciated.
Is this new Cyganonmod installer the best way to go?
Click to expand...
Click to collapse
This phone is built for rooting and modding. You wont know what benefit you have until you either read up and see if the mods are ones you want or actually flash a rom. Sure try the CM installer but if you dont toolkits or just basic knowledge of android can get this phone roooted in minutes.
the CM rom on your HTC will give you the same benefits on your Nexus 4
playya said:
This phone is built for rooting and modding. You wont know what benefit you have until you either read up and see if the mods are ones you want or actually flash a rom. Sure try the CM installer but if you dont toolkits or just basic knowledge of android can get this phone roooted in minutes.
the CM rom on your HTC will give you the same benefits on your Nexus 4
Click to expand...
Click to collapse
Thanks, what do you recommend for the easiest way to unlock and root then?
gjjh25 said:
Thanks, what do you recommend for the easiest way to unlock and root then?
Click to expand...
Click to collapse
I used a toolkit but honestly you can unlock manually by just booting into bootloader mode. Go into development and try Wugs Toolkit.... Rooting the phone is easy and all methods are relatively the same.
I do not see anything wrong with giving CM a try as well
gjjh25 said:
Is it possible to just root my phone?
if so how do i do it?
All the posts I have seen go into unlocking and then rooting
Click to expand...
Click to collapse
I recommend you to stick to your original plan, its your phone, do what you like, you don't need to flash custom roms if you don't want to. I am using stock kernel and stock KitKat right now and the performance is excellent.
Follow these instructions to unlock bootloader, install latest kitkat factory image, install custom TWRP recovery, and root. http://forum.xda-developers.com/showthread.php?t=2010312
The links to fastboot package and driver required is in my signature.
Link to download factory image: https://developers.google.com/android/nexus/images
Link for latest TWRP: TWRP recovery
Link for latest SuperSU package: SuperSU package
After you do all that, in bootloader menu, you can flash back the stock recovery (recovery.img), which is location in the "image-occam-******.zip" of the factory image. (fastboot flash recovery recovery.img)
Then lock your bootloader by "fastboot oem lock". You can also use BootUnlocker to lock and unlock your bootloader on the fly while in the phone, without losing your data, since everytime you do fastboot oem unlock, it will wipe the entire device.
By using stock rom, stock recovery, stock kernel and temporarily unroot (SuperSU) or hide root (SuperSU paid version), it allows you to receive future OTA updates from Google. If you want to modify your phones more while staying with stock, read up on Xposed Framework and its module Gravity Box, which is not yet compatible with Android 4.4 but will be eventually.
Just remember if you don't have custom recovery, once something goes wrong and your phone can't boot, its very hard to save the data inside. Once you have custom recovery like TWRP, you can make a backup of your stock image (which also backup your stock kernel) and try out other custom roms and easily go back to stock, then you can flash stock recovery again to receive OTA updates.
Thanks for advice everyone.
I rooted and unlocked with Wugfresh over the weekend. A lot easier than I thought it would be