Related
UPDATED XOOM FLASHING GUIDE 02/02/12
I recently bought a US Xoom MZ604 and had trouble flashing it initially. I came to a realization that the newer models of Xoom reinstalls the Stock Recovery after you flash a custom Recovery (eg. CWM, Rogue Recovery etc). This is uber frustrating for newer Xoom owners, especially those who are new to the flashing community, simply because you don not know exactly what's going on.
Also, I could not find any proper, full and updated guide to flashing your Xoom. So i decided to take the initiative to do so.
WARNING: I DO NOT TAKE ANY RESPONSIBILITY IF YOUR XOOM TURNS INTO A USELESS BRICK. BY FOLLOWING THIS GUIDE, YOU WILL VOID YOUR XOOM WARRANTY WITH MOTOROLA. YOU HAVE BEEN WARNED TO EXERCISE CAUTION WHILE FOLLOWING THIS GUIDE. STRICTLY FOLLOW THIS GUIDE AND I ASSURE YOU, NOTHING WOULD GO WRONG.
In order to follow this guide, you need fundamental knowledge of ADB and Fastboot for Android. Search around the forum for this knowledge.
STEP 1: Obtaining Required Materials
a.) Download the latest version of Android SDK from HERE and install it into your the root of your C: drive.
b.) Download the latest version of Java SE from HERE and install.
c.) Download and Install the latest version of Motorola USB Drivers from HERE.
STEP 2: Unlocking your Bootloader
What is a Bootloader?
In literal terms, bootloader is code that is executed before any Operating System starts to run. The concept of bootloaders is universal to virtually all Operating systems that inculcates operating systems on your PC, laptop, smartphones, and other such devices. Bootloaders basically package the instructions to boot operating system kernel and most of them also have their own debugging or modification environment. As the bootloader kicks off before any piece of software on your device, it makes it extremely processor specific and every motherboard has it’s own bootloader. Source: http://www.addictivetips.com/mobile/what-is-bootloader-and-how-to-unlock-bootloader-on-android-phones-complete-guide/
Click to expand...
Click to collapse
1.) Make sure your Xoom is turned on. Connect it to your PC via USB.
2.) On your PC, open up File Explorer and Browse to:
C:\Android\android-sdk\platform-tools
Click to expand...
Click to collapse
3.) In that directory, make sure nothing is selected, SHIFT+Right Click into empty space and select "Open command window here".
4.) Command Prompt will open up. Type the following command:
adb reboot bootloader
Click to expand...
Click to collapse
Your XOOM will reboot into the bootloader showing "Starting Fastboot Support Protocol".
6.) Type the following command into the Command Prompt to unlock your bootloader:
fastboot oem unlock
Click to expand...
Click to collapse
7.) Read the warning and follow the instructions on the Xoom Tablet itself from this point onwards. Use the Volume Down key to navigate to 'Accept' the agreement and press Volume Up to select.
8.) Once selected, your Xoom will now unlock and format itself, meaning, all data will be cleared and you will back to a factory rest.
9.) Reboot your Xoom with the following command:
fastboot reboot
Click to expand...
Click to collapse
10.) Exit Command Prompt.
STEP 3: Rooting your Xoom
1.) Download the latest version of "Universal Xoom Root" from this thread. Place the .ZIP file into the root of your SD card.
2. Download this version of "ClockworkMod Recovery - Modified for Motorola Xoom" and place it into this directory:
C:\Android\android-sdk\platform-tools
Click to expand...
Click to collapse
This will your new Recovery. MAKE SURE THAT IT IS IN .IMG FORMAT.
2.) With your Xoom still connected to your PC, type the following commands into Command Prompt (open up using the same method as STEP 1) to install your new Recovery.
adb reboot bootloader
fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img
Click to expand...
Click to collapse
3.) Once you have verification on your device that this has been flashed, reboot your device by holding volume up + power.
Then 3 seconds after you see the Motorola logo, hit volume down. You should now see "Android Recovery" in the top left corner. Hit volume up to boot into recovery. If you miss this window and somehow end up booting your Xoom normally, repeat from STEP 3, section 2 onwards again. DO NOT CLOSE THE COMMAND PROMPT WINDOW.
4.)To root your Xoom, please perform the following:
"install zip from sdcard" -> "Choose zip from sdcard", then select the Xoom-Universal-Root.zip file you downloaded.
Note: use the volume buttons to navigate and the power button to select
Click to expand...
Click to collapse
After the root flashes itself, DO NOT REBOOT YOUR XOOM!
5.) Now you have to rename the 2 notorious files, that reinstall your Stock Recovery over CWM, into a format that is unreadable by the bootloader. In the already opened Command Prompt, type the following commands:
adb remount
adb shell mv /system/recovery-from-boot.p /system/recovery-from-boot.p.old
adb shell mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.old
Click to expand...
Click to collapse
6.) Reboot with CWM. Let your Xoom boot normally.
To test whether the root and flashing of CWM has been successful, type the following into your command prompt:
adb reboot recovery
Click to expand...
Click to collapse
If you are able to access the new Recovery, CONGRATULATIONS, you have successfully UNLOCKED & ROOTED your Xoom.
I would like to thank the Xoom Android community for your valuable commitment to into Xoom Android Development. Without you guys, the Xoom wouldn't feel much powerful in terms of usage. Also, I'd like to extend my gratitude to okantomi for his help when I first started out.
Those those experienced users of Xoom, please kindly help the newbies like me answer their questions in this thread. Could I also request the mods to sticky this thread for reference.
NOTE: For users who would like to revert to the original recovery, type the following into ADB: (tip provided by wontoniii)
adb shell mv /system/recovery-from-boot.p.old /system/recovery-from-boot.p
adb shell mv /system/etc/install-recovery.sh.old /system/etc/install-recovery.sh
adb reboot
Click to expand...
Click to collapse
Reference Threads:
1.) [Recovery] ClockworkMod 3.2.0.0 (R4c) Modded for Internal media [UPDATED 10/6]
2.) [ROM][Nightly][ICS] Team Eos WiFi Nightlies (Wingray/MZ604)
3.) [Root] Universal Xoom Root - ANY XOOM ANY UPDATE
Just my opinion, I would not recommend to everybody the step3/point6 as you do it...
I would just do something like:
adb remount
adb shell mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.old
Click to expand...
Click to collapse
This can be easily reverted with:
adb remount
adb shell mv /system/etc/install-recovery.sh.old /system/etc/install-recovery.sh
Click to expand...
Click to collapse
In case someone could want the old recovery back without flashing anything
wontoniii said:
Just my opinion, I would not recommend to everybody the step3/point6 as you do it...
I would just do something like:
This can be easily reverted with:
In case someone could want the old recovery back without flashing anything
Click to expand...
Click to collapse
I believe your method is better, at least there's still a recovery to revert to in case something goes wrong. I'll add it to the guide. Thanks for the suggestion!
Sent from my Xoom using Tapatalk
My tool can do it automatically, check on the signature LordAIOTool, and if you guys can please test and tell me the results
---------- Post added at 08:57 PM ---------- Previous post was at 08:39 PM ----------
wontoniii said:
Just my opinion, I would not recommend to everybody the step3/point6 as you do it...
I would just do something like:
This can be easily reverted with:
In case someone could want the old recovery back without flashing anything
Click to expand...
Click to collapse
I liked your idea too, will put on my tool (can I?)
XxLordxX said:
I liked your idea too, will put on my tool (can I?)
Click to expand...
Click to collapse
Sure, no prob
Thread moved to General.
This seams to be a good guide can anyone tell me if it works it is more detailed than the other guide ???? and why was it moved to general
This guide is great and easy and very updated i dont know why other people dont use it. One thing tho you should be more clear on how to reboot into recovery tell them to press volume up + power then let go then wait three seconds and after logo and press only the volume down
Having a problem with using your guide
Ok, I'm a noob. I am probably missing something simple. When I type "adb reboot bootloader" at the command prompt it says "Device not found." My Xoom is connected via USB (Same cable it came with). Xoom appears in my explorer window I can browse through the files; I even transferred files to the SD card. It is just not detected from the command prompt window when I start the unlocking procedure. Any assistance would be appreciated. Using Xoom 4G, Android 3.2.4; Windows 7
Make sure that adb debugging is checked. You can find this under Applications > Development settings.
Before you type, check if your device is listed
Code:
adb devices
This should list your device.
dstruble said:
Ok, I'm a noob. I am probably missing something simple. When I type "adb reboot bootloader" at the command prompt it says "Device not found." My Xoom is connected via USB (Same cable it came with). Xoom appears in my explorer window I can browse through the files; I even transferred files to the SD card. It is just not detected from the command prompt window when I start the unlocking procedure. Any assistance would be appreciated. Using Xoom 4G, Android 3.2.4; Windows 7
Click to expand...
Click to collapse
kewlguru said:
Make sure that adb debugging is checked. You can find this under Applications > Development settings.
Before you type, check if your device is listed
Code:
adb devices
This should list your device.
Click to expand...
Click to collapse
That did the trick I figured it was something simple like that. Thanks for the help.
Superb Guide!
Many thanks, I spent the best part of a day trying various methods but found this to be the most n00b friendly
1 point it may be worth adding is to use adb you must have java installed on your pc, without you get error "adb.exe is not a valid win32 application"
first time root/flash rom question
Hi all..to start with sorry if im asking in the wrong place. I have a stock Xoom with an unmodded ICS I also own the Bionic. Also I have never rooted or flashed anything so I am a super noob (soon to change though).
I wated to be able to have USB host functionality and be able to have SD card read/write assess so last week I started searching Google which led me to this wonderful sight of great help. There might be too much help because after tons of reading there is more than one way to do what I want. Can someone please point me in the best way to root and which rom I should use that will give me the least about of trouble.
Thanks in advance
Don_Don said:
Hi all..to start with sorry if im asking in the wrong place. I have a stock Xoom with an unmodded ICS I also own the Bionic. Also I have never rooted or flashed anything so I am a super noob (soon to change though).
I wated to be able to have USB host functionality and be able to have SD card read/write assess so last week I started searching Google which led me to this wonderful sight of great help. There might be too much help because after tons of reading there is more than one way to do what I want. Can someone please point me in the best way to root and which rom I should use that will give me the least about of trouble.
Thanks in advance
Click to expand...
Click to collapse
Ihave similar story m8. I spent the majority of yesterday reading and learning how to root. This is by far the easiest guide to follow to ulock and root your xoom.
I just want to correct a small error here.
In Step 6 of Step 3, you say you want to check and make sure that the new bootloader is on there correctly.
I think you mean to say check and make sure the new "Recovery" is on there and the adb command would be "adb reboot recovery".
Am I wrong? If so, please disregard.
At which point do I back up data already on Xoom? Will there be any data loss?
Don_Don said:
At which point do I back up data already on Xoom? Will there be any data loss?
Click to expand...
Click to collapse
You have to backup your data before unlocking the bootloader, which is the VERY FIRST step.
gbenj said:
I just want to correct a small error here.
In Step 6 of Step 3, you say you want to check and make sure that the new bootloader is on there correctly.
I think you mean to say check and make sure the new "Recovery" is on there and the adb command would be "adb reboot recovery".
Am I wrong? If so, please disregard.
Click to expand...
Click to collapse
Yes you are right. Thanks for pointing that it, it could have confused some. I'll rectify that right away.
Ok so I have a question about this rooting process and I haven't seen the answer yet. My question is will this process work weather your xoom is running ICS or HC?
TADitto said:
Ok so I have a question about this rooting process and I haven't seen the answer yet. My question is will this process work weather your xoom is running ICS or HC?
Click to expand...
Click to collapse
Yes, this process will work regardless of your OS.
Having just purchased another Atrix that was running stock Gingerbread 2.3.6 (4.5.141), I was frustrated by the lack of a complete rooting guide and appropriate files. There is a guide in this forum (Link) which is based on an article from Android Advice (Link), but I noticed that both lack a lot of basic information for the inexperienced user. Also, the zip file available from Android Advice was missing a key file (Superuser!). So, I made a guide.
This may look complicated, but is super easy. If you don't feel comfortable using this method, you can use this automated tool (yes, it works on 4.5.141). It won't be as satisfying, or even feel good. You won't learn anything, but you will be rooted. Download tool here (link in OP is broken).
Pre-work:
1) Read the xda Atrix Beginners Guide (then read it again)! (Link)
2) Download and install 7zip. (Link)
3) If they are not already installed on your PC, download and install the Atrix drivers for Windows. (Link)
4) Download the attached files (sorry, had to break them in to two files due to forum size constraints). Create a new folder on your hard drive named "Android" (c:\Android). Extract both attached zip files to this folder (all the files need to be in "Android", not in a sub folder).
5) On your phone go to Settings, Applications, Development, then tick USB Debugging.
Notes:
Do not type quotes.
After each command hit enter.
Be mindful of spaces.
You can simply copy each command and paste in to the command prompt.
If you encounter any errors after entering a command, just ignore and keep going (assuming you entered the command properly).
Work:
1) Attach your phone to the PC via USB. In the USB settings make sure USB Mass Storage is selected.
2) Reboot phone while holding volume down until you see "fastboot".
3) Press volume up to initiate fastboot.
4) On your PC click the Start menu, then in the search box type "cmd"
5) In the command prompt type "cd c:/android"
6) "fastboot.exe flash preinstall preinstall.img"
7) "fastboot.exe reboot"
8) Wait for phone to reboot.
9) "adb shell"
10) "/preinstall/dosu". If you get an error (I did), type "/preinstall/su"
11) "/bin/mount -o remount,rw /system"
12) cp /preinstall/su /system/bin/"
13) "chmod 6755 /system/bin/su"
14) "PATH=/system/bin:$PATH pm install /preinstall/Superuser.apk"
15) Reboot phone.
16) On your phone go to your apps and make sure the Superuser icon is there. Open the app, go to settings, then update the SU binary.
17) Open a terminal emulator, then type "su" and hit enter. You should see "#" if you are rooted. Or, download Root Checker from the Play Store.
My phone rebooted itself after step 11, so I had to re-open the adb shell.
I copied and pasted the text from the command prompt for reference (attached).
If I missed anything or have any errors, let me know and I will update the post.
Good luck!
Note: If you experience problems with updating superuser after rooting, try going in to Manage Applications and clear Superuser data. If that doesn't work go to the Play Store and Install Superuser Update Fixer.
Downloads:
My Atrix AFH Folder
*****
Thanksssss
Just want to show my appreciation. Your guide followed step by step worked flawlessly on my atrix. Ive been trying to root this darn thing for about a week and a half with no luck. found your guide and worked perfect first time around. Thanks..
David
Thanks for the information. Just wanted to do this, and while reading the procedure, I found that there is no Superuser.apk in the attachments. Do I have to get it from some other place.
Thanks
upndwn4par said:
Having just purchased another Atrix that was running stock Gingerbread 2.3.6 (4.5.141), I was frustrated by the lack of a complete rooting guide and appropriate files. There is a guide in this forum (Link) which is based on an article from Android Advice (Link), but I noticed that both lack a lot of basic information for the inexperienced user. Also, the zip file available from Android Advice was missing a key file (Superuser!). So, I made a guide.
Remember to click THANKS if this guide helped you!
Pre-work:
1) Read the xda Atrix Noob Guide (then read it again)! Link
2) Download and install 7zip. Link
3) If they are not already installed on your PC, download and install the Atrix drivers for Windows. Link.
4) Download the attached files (sorry, had to break them in to two files due to forum size constraints). Create a new folder on your hard drive named "Android" (c:\Android). Extract both attached zip files to this folder (all the files need to be in "Android", not in a sub folder).
5) On your phone go to Settings, Applications, Development, then tick USB Debugging.
Notes:
Do not type quotes.
After each command hit enter.
Be mindful of spaces.
Work:
1) Attach your phone to the PC via USB. In the USB settings make sure USB Mass Storage is selected.
2) Reboot phone while holding volume down.
3) Press volume up to initiate fastboot.
4) On your PC click the Start menu, then in the search box type "cmd"
5) In the command prompt type "cd c:/android"
6) "fastboot.exe flash preinstall preinstall.img"
7) "fastboot.exe reboot"
8) Wait for phone to reboot.
9) "adb shell"
10) "/preinstall/dosu". If you get an error (I did), type "/preinstall/su"
11) "/bin/mount -o remount,rw /system"
12) cp /preinstall/su /system/bin/"
13) "chmod 6755 /system/bin/su"
14) "PATH=/system/bin:$PATH pm install /preinstall/Superuser.apk"
15) Reboot phone.
16) On your phone go to your apps and make sure the Superuser icon is there. Open the app, go to settings, then update the SU binary.
My phone rebooted itself after step 11, so I had to re-open the adb shell.
I copied and pasted the text from the command prompt for reference (attached).
If I missed anything or have any errors, let me know and I will update the post.
Good luck!
Click to expand...
Click to collapse
RE super user pkg.
aksma said:
Thanks for the information. Just wanted to do this, and while reading the procedure, I found that there is no Superuser.apk in the attachments. Do I have to get it from some other place.
Thanks
Click to expand...
Click to collapse
Well for me what happen is down at the bottom he has two links for two of the files you need to zip. in one of those, there is a superuser file. When doing the cmd commands at the end you will end up installing the superuser. The best thing to do which really helped me was to download the command prompt text file, that way you can mimic exactly what you see. Hope this helps.
-David
Thanks David, I just started doing the same. Lets see how it goes.
good luck
aksma said:
Thanks David, I just started doing the same. Lets see how it goes.
Click to expand...
Click to collapse
no problem. Believe me i was in the same position. I must of tried rooting mine like 15 times to no avail ,then i found this thread and it worked.
Worked like a Champ!! Thanks David... Was quick and easy.. ..
excellent
aksma said:
Worked like a Champ!! Thanks David... Was quick and easy.. ..
Click to expand...
Click to collapse
Good deal. So glad i found this thread haha.
Glad I could help!
good one.
Thanks a lot
was so expected that this guide
Going to give it a try
I read through everything and think I have somewhat of a clue on what I need to do..LOL. Whatever the results I will post back and let you know. I have had my atrix since it was first released and have never had the time to root it as I cannot be without a phone couldn't take a chance.
I retire soon so hopefully will have more time to get invovled in things as this is a great forum.
Mac
Thanks!
Rooted phone
dmacdog said:
I read through everything and think I have somewhat of a clue on what I need to do..LOL. Whatever the results I will post back and let you know. I have had my atrix since it was first released and have never had the time to root it as I cannot be without a phone couldn't take a chance.
I retire soon so hopefully will have more time to get invovled in things as this is a great forum.
Mac
Click to expand...
Click to collapse
Welcome to the wonderful world of messing with your phone!
You really can't harm your phone trying to root it. If you type a command wrong, just re-type it. No worries. There are lots of good guides out there for whatever you want to do. The noob guide (linked on the first page) is a great place to start. And there are plenty of members willing to help.
Let us know how things go!
thanks
that was cool!
very usefull!! thank you!
very useful
Sent from my MB860 using xda premium
condor7272 said:
that was cool!
Click to expand...
Click to collapse
Yes it is. Awesome feeling to look in your app drawer and see this:
THANKS!!
upndwn4par said:
Welcome to the wonderful world of messing with your phone!
You really can't harm your phone trying to root it. If you type a command wrong, just re-type it. No worries. There are lots of good guides out there for whatever you want to do. The noob guide (linked on the first page) is a great place to start. And there are plenty of members willing to help.
Let us know how things go!
Click to expand...
Click to collapse
followed the directions and am now rooted!!
next to look for boot load unlock - not sure why but 'im gonna figure it out - and then an ics rom or wait for the q3 'official' motorola release . . . decisions
1iJakk said:
followed the directions and am now rooted!!
next to look for boot load unlock - not sure why but 'im gonna figure it out - and then an ics rom or wait for the q3 'official' motorola release . . . decisions
Click to expand...
Click to collapse
Don't unlock your bootloader if you think you will want official Moto ICS update (major hard brick risk).
Accidental OTA on custom rom. I have tried other posts but nothing works so far. Can someone please help.
Does the phone turn on and show LG?
Sent from my LG-VS980 using Tapatalk
lilxman said:
Does the phone turn on and show LG?
Sent from my LG-VS980 using Tapatalk
Click to expand...
Click to collapse
What happens when you use anything in CWM?
SmurFFF said:
Accidental OTA on custom rom. I have tried other posts but nothing works so far. Can someone please help.
Click to expand...
Click to collapse
the link below will allow you to revert back to stock unrooted 11A.
after that you can take the OTA to 12B, reroot via IORoot and then use FreeGee to install recovery of your choice.
This has saved my phone a couple times from me getting too cocky with screwing around with things i don't fully understand but think I do.
http://forum.xda-developers.com/showthread.php?t=2448960
no download mode
WolfmanJack said:
the link below will allow you to revert back to stock unrooted 11A.
after that you can take the OTA to 12B, reroot via IORoot and then use FreeGee to install recovery of your choice.
This has saved my phone a couple times from me getting too cocky with screwing around with things i don't fully understand but think I do.
http://forum.xda-developers.com/showthread.php?t=2448960
Click to expand...
Click to collapse
cant boot into download mode
lilxman said:
Does the phone turn on and show LG?
Sent from my LG-VS980 using Tapatalk
Click to expand...
Click to collapse
it boots straight into cwm usually, sometimes stuck in lg logo
Hmm OK. At work now, I will look into it when I get home. Just throwing this out there cause it caught me, you just press the volume up button, hold it down, then plug in the USB cable with the LG flash tool open and configured. I kept holding the power button down as well.
Sent from my LG-VS980 using xda app-developers app
staticx57 said:
What happens when you use anything in CWM?
Click to expand...
Click to collapse
i tried flashing new rom but says loki not supported or something
WolfmanJack said:
Hmm OK. At work now, I will look into it when I get home. Just throwing this out there cause it caught me, you just press the volume up button, hold it down, then plug in the USB cable with the LG flash tool open and configured. I kept holding the power button down as well.
Sent from my LG-VS980 using xda app-developers app
Click to expand...
Click to collapse
how do i log into flash tool
SmurFFF said:
how do i log into flash tool
Click to expand...
Click to collapse
Reread the thread there is a file you need to replace that corrects that. Uninstall it, reinstall, replace the file and then attempt to open.
WolfmanJack said:
Reread the thread there is a file you need to replace that corrects that. Uninstall it, reinstall, replace the file and then attempt to open.
Click to expand...
Click to collapse
still no download mode
SmurFFF said:
still no download mode
Click to expand...
Click to collapse
Ok man here ya go, did some digging around here and found these two threads that may help you.
First is a means of pushing TWRP via ADB, not sure if that is the answer for you by you never know till you try.
Second is a means of using Ubuntu or a VM to replace the corruption caused by OTA
http://forum.xda-developers.com/showthread.php?t=2449670
http://forum.xda-developers.com/showthread.php?t=2582142
If those do not work either the only other thing I could think to do would be to get on the lg-g2 IRC channel and request help from a dev that is online.
WolfmanJack said:
Ok man here ya go, did some digging around here and found these two threads that may help you.
First is a means of pushing TWRP via ADB, not sure if that is the answer for you by you never know till you try.
Second is a means of using Ubuntu or a VM to replace the corruption caused by OTA
http://forum.xda-developers.com/showthread.php?t=2449670
http://forum.xda-developers.com/showthread.php?t=2582142
If those do not work either the only other thing I could think to do would be to get on the lg-g2 IRC channel and request help from a dev that is online.
Click to expand...
Click to collapse
i have never done an adb before is there any way u could help
SmurFFF said:
i have never done an adb before is there any way u could help
Click to expand...
Click to collapse
There is a pretty detailed guide somewhere on the forum. I will locate it, read through it and add to it if need be bro.
WolfmanJack said:
There is a pretty detailed guide somewhere on the forum. I will locate it, read through it and add to it if need be bro.
Click to expand...
Click to collapse
thanks sorry about all the questions
SmurFFF said:
thanks sorry about all the questions
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2141817
No worries on the questions man, here is the guide I was talking about. It is pretty straight forward but some areas you may have questions I will let you know what I did.
At one point it talks about setting up system variables or something to that effect. I did not perform this step.
When you open the SDK manager and look at all the packages that are listed it can get a little confusing, for me I just selected all and let the install run it's course. ( took about 20mins ).
Once the install is good it talks about moving a copy of command prompt to the platform tools folder. Not trying to insult your intelligence but it is that simple. Just locate where the .exe for command promt on your computer is, copy it and paste in the platform tools folder.
Once that is done turn your phone on and then plug the phone into your computer. Open the command prompt from the platform tools folder and then type the following:
adb devices
it should populate some brief info about your phone. If not then usb debugging is not enabled on the device. This is why I think this one may not work for you because if it isn't already enabled not sure if there would be a way for you to enable it with the state your device is in, but there are two other ways in the TWRP guide that i already posted about that may work plus the second thread talking about using ubuntu.
WolfmanJack said:
http://forum.xda-developers.com/showthread.php?t=2141817
No worries on the questions man, here is the guide I was talking about. It is pretty straight forward but some areas you may have questions I will let you know what I did.
At one point it talks about setting up system variables or something to that effect. I did not perform this step.
When you open the SDK manager and look at all the packages that are listed it can get a little confusing, for me I just selected all and let the install run it's course. ( took about 20mins ).
Once the install is good it talks about moving a copy of command prompt to the platform tools folder. Not trying to insult your intelligence but it is that simple. Just locate where the .exe for command promt on your computer is, copy it and paste in the platform tools folder.
Once that is done turn your phone on and then plug the phone into your computer. Open the command prompt from the platform tools folder and then type the following:
adb devices
it should populate some brief info about your phone. If not then usb debugging is not enabled on the device. This is why I think this one may not work for you because if it isn't already enabled not sure if there would be a way for you to enable it with the state your device is in, but there are two other ways in the TWRP guide that i already posted about that may work plus the second thread talking about using ubuntu.
Click to expand...
Click to collapse
Ive done everything it said but i cant get it to recognize adb as a command
SmurFFF said:
Ive done everything it said but i cant get it to recognize adb as a command
Click to expand...
Click to collapse
Does it say:
"adb" is not recognized as an internal or external command, operable program or bath file
If so the command promt isnt executing from the platform tools.
attatched is a screenshot of two CMD windows, look at the location listed before where what you type in shows up.
the location on the left is from the cmd opened from the platform tools folder, the one on the right is from opening up command prompt from where it is originally located on my computer. when you open yours compare the locations and let me know what you got.
WolfmanJack said:
Does it say:
"adb" is not recognized as an internal or external command, operable program or bath file
If so the command promt isnt executing from the platform tools.
attatched is a screenshot of two CMD windows, look at the location listed before where what you type in shows up.
the location on the left is from the cmd opened from the platform tools folder, the one on the right is from opening up command prompt from where it is originally located on my computer. when you open yours compare the locations and let me know what you got.
Click to expand...
Click to collapse
im on windows 8 and when i try to find the cmd application i only get a shortcut?
not sure if it differs in windows 8 or not but I know i 7 and older versions it is located C:/windows/system32
also when you copied it did you select paste shortcut or just paste? If you selected paste shortcut that may be your issue, i selected paste and it populates as its own .exe not a short cut. Let me know what you get.
Okay guys first off sorry if there's a thread for this but XDA has become so over crowded and full of comments it's just to much to read through and try to remember. But anyway
Can anyone point me in the right direction or simply explain real quick how to properly root the T-Mobile variant. I'm running full stock (Obviously) I'm on H91810j and would like to debloat a little and use greenify. Any help is appreciated.
StonerSteve420 said:
Okay guys first off sorry if there's a thread for this but XDA has become so over crowded and full of comments it's just to much to read through and try to remember. But anyway
Can anyone point me in the right direction or simply explain real quick how to properly root the T-Mobile variant. I'm running full stock (Obviously) I'm on H91810j and would like to debloat a little and use greenify. Any help is appreciated.
Click to expand...
Click to collapse
There is literally speaking a thread dedicated just for the sake of rooting and twrp lol. Here:
https://forum.xda-developers.com/v20/development/h918-recowvery-unlock-v20-root-shell-t3490594
It should take about 3 to 5 minutes to complete the whole process if you know what you are doing. If you are a noob it might take sometime to figure out were to go from one step to another
Also, just remember, there is a search function on the v20 section's main screen. You can always use keywords and the function will search what you are looking for (if someone has posted something related to That). As French prople says... "Bon chance|"
P.s: yes. The rooting method by jcadduono works for 10j
jinkerz9430 said:
There is literally speaking a thread dedicated just for the sake of rooting and twrp lol. Here:
https://forum.xda-developers.com/v20/development/h918-recowvery-unlock-v20-root-shell-t3490594
It should take about 3 to 5 minutes to complete the whole process if you know what you are doing. If you are a noob it might take sometime to figure out were to go from one step to another
Also, just remember, there is a search function on the v20 section's main screen. You can always use keywords and the function will search what you are looking for (if someone has posted something related to That). As French prople says... "Bon chance|"
P.s: yes. The rooting method by jcadduono works for 10j
Click to expand...
Click to collapse
ive downloaded everything and when i extract the adb fastboot it extracts just fine but when i go to run it as administrator a box opens then closes immediately. what am i doing wrong
StonerSteve420 said:
ive downloaded everything and when i extract the adb fastboot it extracts just fine but when i go to run it as administrator a box opens then closes immediately. what am i doing wrong
Click to expand...
Click to collapse
Oh. The adb i used was from a pixel thread... The one posted in the rooting thread seems to either be missing a file called lib.... Something i forgot the name lol; or they did open and close immediately like it happened to you.
jinkerz9430 said:
Oh. The adb i used was from a pixel thread... The one posted in the rooting thread seems to either be missing a file called lib.... Something i forgot the name lol; or they did open and close immediately like it happened to you.
Click to expand...
Click to collapse
Can you link me to the adb you used. It just keeps opening and closing.
StonerSteve420 said:
Can you link me to the adb you used. It just keeps opening and closing.
Click to expand...
Click to collapse
Let me see if i can find it. If not i will zip it and send it to you
jinkerz9430 said:
Let me see if i can find it. If not i will zip it and send it to you
Click to expand...
Click to collapse
Thank you
StonerSteve420 said:
Thank you
Click to expand...
Click to collapse
Well. I couldnt find it. Anyway, i made a zip with all the files. Here:
View attachment 4070081
jinkerz9430 said:
Well. I couldnt find it. Anyway, i made a zip with all the files. Here:
View attachment 4070081
Click to expand...
Click to collapse
Still doing it. I must be the one person who's screwed lol
StonerSteve420 said:
Still doing it. I must be the one person who's screwed lol
Click to expand...
Click to collapse
Have you tried to run it in administrative mode?
jinkerz9430 said:
Have you tried to run it in administrative mode?
Click to expand...
Click to collapse
Right click run as administrator? Yes I have. Still can't get this to work. I'm using WinRar idk if that's the culprit or not. It's always been reliable.
Here, use this.
https://forum.xda-developers.com/showthread.php?t=2588979
Best for noobs.
It it asks about system wide say yes.
Then hit Windows key and R and type cmd. Then run your commands. The installer should also work.
StonerSteve420 said:
Right click run as administrator? Yes I have. Still can't get this to work. I'm using WinRar idk if that's the culprit or not. It's always been reliable.
Click to expand...
Click to collapse
Wait. I forgot to tell you. You cant double click the files. The files can be accessed only by using cmd. (command promt). So, extract the files into a folder, and use cd or pushd in dorect it to the directory where the files are. That is the proper way.
jinkerz9430 said:
Wait. I forgot to tell you. You cant double click the files. The files can be accessed only by using cmd. (command promt). So, extract the files into a folder, and use cd or pushd in dorect it to the directory where the files are. That is the proper way.
Click to expand...
Click to collapse
I know what you mean but how does the command go. I know I have to type something then add the file name sorry like I said I'm used to the old way maybe use adb for one step then the rest does it itself lol trying to catch up
StonerSteve420 said:
I know what you mean but how does the command go. I know I have to type something then add the file name sorry like I said I'm used to the old way maybe use adb for one step then the rest does it itself lol trying to catch up
Click to expand...
Click to collapse
For starter... Whats the directory where you downloaded and extracted adb fastboot? Assuming you are using the file i sent you. Was it on the downloads directory? If so open cmd (not in administratibe mode) and type pushd Downloads . Then ise all the start the adb server by using adb start-server to recognize your device. Or if you want to even see if your device is even present type adb devices
jinkerz9430 said:
For starter... Whats the directory where you downloaded and extracted adb fastboot? Assuming you are using the file i sent you. Was it on the downloads directory? If so open cmd (not in administratibe mode) and type pushd Downloads . Then ise all the start the adb server by using adb start-server to recognize your device. Or if you want to even see if your device is even present type adb devices
Click to expand...
Click to collapse
I have it in a folder on the desktop. So I type pushed Desktop/(folder name)? Or can it not be in a desktop folder. Sorry your spelling is confusing me with the second part how do I start adb server? Do I type adb start-server? Thanks for helping it's greatly appreciated
StonerSteve420 said:
I have it in a folder on the desktop. So I type pushed Desktop/(folder name)? Or can it not be in a desktop folder. Sorry your spelling is confusing me with the second part how do I start adb server? Do I type adb start-server? Thanks for helping it's greatly appreciated
Click to expand...
Click to collapse
You could use the desktop but it is more troublesome to type the directory. Thats why i suggest to put it on the downloads folder and asked you to not start the cmd as administrative. Because when you dont start it as administrative, cmd will start right from the users folder and then is only a matter of writting pushd Downloads. Focus on the first part first. Otherwise you will go nowhere lol.
jinkerz9430 said:
You could use the desktop but it is more troublesome to type the directory. Thats why i suggest to put it on the downloads folder and asked you to not start the cmd as administrative. Because when you dont start it as administrative, cmd will start right from the users folder and then is only a matter of writting pushd Downloads. Focus on the first part first. Otherwise you will go nowhere lol.
Click to expand...
Click to collapse
Thank you. I'll try that when I get home.
jinkerz9430 said:
You could use the desktop but it is more troublesome to type the directory. Thats why i suggest to put it on the downloads folder and asked you to not start the cmd as administrative. Because when you dont start it as administrative, cmd will start right from the users folder and then is only a matter of writting pushd Downloads. Focus on the first part first. Otherwise you will go nowhere lol.
Click to expand...
Click to collapse
Okay I got into the download folder using cmd (pushd download) i tried doing adb and hitting enter after and it brought up a bunch of lines after that. I did adb devices and it shows my phone but when I do fastboot oem unlock it just hangs at waiting for devices. USB debugging is on and so is OEM unlock.
StonerSteve420 said:
Okay I got into the download folder using cmd (pushd download) i tried doing adb and hitting enter after and it brought up a bunch of lines after that. I did adb devices and it shows my phone but when I do fastboot oem unlock it just hangs at waiting for devices. USB debugging is on and so is OEM unlock.
Click to expand...
Click to collapse
but are you in fastboot mode now? because after you have done the OEM unlock and then after that use usb debbugging then accept the prompt it shows about giving authorization to your computer, then after that you must go to fastboot mode to start the process of root
I rooted my tablet by using king root but I don't know what to do for android. Can someone tell me how to do that. I'm in the latest version and using windows computer
Practically said:
I rooted my tablet by using king root but I don't know what to do for android. Can someone tell me how to do that. I'm in the latest version and using windows computer
Click to expand...
Click to collapse
Wait - I responded to a PM and directed you to the appropriate thread. Please check your mail and proceed accordingly. The HDX forums have a wealth of information that should allow you to unlock your device and install a custom ROM with minimal effort.
Thanks for answer @Davey126 I red your mail but I still have some questions. I bought this tablet yesterday and this is my very first Android experience. I got how to root and unlock my device but I don't know the rest I mean is there any thread for very beginners ?
Practically said:
Thanks for answer @Davey126 I red your mail but I still have some questions. I bought this tablet yesterday and this is my very first Android experience. I got how to root and unlock my device but I don't know the rest I mean is there any thread for very beginners ?
Click to expand...
Click to collapse
If your device is currently unlocked you should be able to launch a custom recovery environment called TWRP. That's where most device maintenance is performed such as installing different versions of 'android' otherwise known as custom ROMs. Try this:
- power off device
- press and hold <power>+<vol-up> until Kindle Fire logo appears
- immediatlely release power button followed by volume 1-2 seconds later
- wait a few more seconds for next screen to appear
- what happens?
To exit recovery mode long press power until device shuts off. A short press will start the device normally.
Your response will determine next steps. If TWRP is present you're just a few steps away from installing a custom ROM. If stock Amazon recovery appears (just two options) then there is more work to be done.
Davey126 said:
If your device is currently unlocked you should be able to launch a custom recovery environment called TWRP. That's where most device maintenance is performed such as installing different versions of 'android' otherwise known as custom ROMs. Try this:
- power off device
- press and hold <power>+<vol-up> until Kindle Fire logo appears
- immediatlely release power button followed by volume 1-2 seconds later
- wait a few more seconds for next screen to appear
- what happens?
To exit recovery mode long press power until device shuts off. A short press will start the device normally.
Your response will determine next steps. If TWRP is present you're just a few steps away from installing a custom ROM. If stock Amazon recovery appears (just two options) then there is more work to be done.
Click to expand...
Click to collapse
I dont get this mean
Run:
Code:
adb shell
su
dd if=/sdcard/twrp_cubed.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
dd if=/sdcard/aboot_vuln.mbn of=/dev/block/platform/msm_sdcc.1/by-name/aboot
how can i run this
Practically said:
I dont get this mean
Run:
Code:
adb shell
su
dd if=/sdcard/twrp_cubed.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
dd if=/sdcard/aboot_vuln.mbn of=/dev/block/platform/msm_sdcc.1/by-name/aboot
how can i run this
Click to expand...
Click to collapse
I'm stuck at waiting for any device screen and there is fastboot text on my tablet
Practically said:
I dont get this mean
Run:
Code:
adb shell
su
dd if=/sdcard/twrp_cubed.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
dd if=/sdcard/aboot_vuln.mbn of=/dev/block/platform/msm_sdcc.1/by-name/aboot
how can i run this
Click to expand...
Click to collapse
In Windows Dos prompt
Practically said:
I'm stuck at waiting for any device screen and there is fastboot text on my tablet
Click to expand...
Click to collapse
Your driver not installed properly. Pls just follow my thread tips.
@kkcheong sorry for bother you just to clarify my situation. I rooted my tablet and spent 8 hours yesterday to unlock it but couldn't. First of all code_generator.bat works fine it creates unlock.code file. however When i apply the unlock bat I got an error on my tablet screen which says unlock code is not correct. Can you help me about what to do by explaining to very very very noob person. Another issue is i cant copy the 2 files to root folder i tried es browser and root browser.
1. I think your ADB driver not properly install. Check your Hardware Device in your windows for ADB. If no such ADB in your Hardware means you have install ADB properly
2. You cannot copy to root? You maybe need to enable R/W with root explorer or es explorer root.
Practically said:
@kkcheong sorry for bother you just to clarify my situation. I rooted my tablet and spent 8 hours yesterday to unlock it but couldn't. First of all code_generator.bat works fine it creates unlock.code file. however When i apply the unlock bat I got an error on my tablet screen which says unlock code is not correct. Can you help me about what to do by explaining to very very very noob person. Another issue is i cant copy the 2 files to root folder i tried es browser and root browser.
Click to expand...
Click to collapse
Practically said:
@kkcheong sorry for bother you just to clarify my situation. I rooted my tablet and spent 8 hours yesterday to unlock it but couldn't. First of all code_generator.bat works fine it creates unlock.code file. however When i apply the unlock bat I got an error on my tablet screen which says unlock code is not correct. Can you help me about what to do by explaining to very very very noob person. Another issue is i cant copy the 2 files to root folder i tried es browser and root browser.
Click to expand...
Click to collapse
Suspect vulnerable bootloader (and cubed TWRP) have not been installed as outlined in step #2 of the unlock thread OP.
I can transfer the two file to root folder. Now what should I do. Sorry for long questions but I have limited opportunity for using a computer since I don't have. I use friend of mine's. I want to make sure I got every step correctly. In the post I can do generate code thing. I successfully generate unlock.code file but the whe I write adb shell in cmd I got error something like adb is not recognised. Do you have any idea of any script file that do these things automatically.
So
Step 1 Done
Two files was copied to root folder
But stuck at code thing. Btw I don't have any driver issue since I can enable fastboot and get Unock code is wrong error
Practically said:
I can transfer the two file to root folder. Now what should I do. Sorry for long questions but I have limited opportunity for using a computer since I don't have. I use friend of mine's. I want to make sure I got every step correctly. In the post I can do generate code thing. I successfully generate unlock.code file but the whe I write adb shell in cmd I got error something like adb is not recognised. Do you have any idea of any script file that do these things automatically.
So
Step 1 Done
Two files was copied to root folder
But stuck at code thing. Btw I don't have any driver issue since I can enable fastboot and get Unock code is wrong error
Click to expand...
Click to collapse
You need to access the device via adb to issue the commands listed in step #2 of the unlock post:
- boot into FireOS and unlock device
- enable USB debugging from the FireOS settings menu (Google if you need help finding it)
- tether device; you may get an authorization prompt on device (look for it)
- there may be a notification indicating device is connected in 'charge mode'; switch it to 'file transfer' also known as 'MTP'
- open a Windows command prompt and navigate to folder where adb/fastboot commands live
- issue commands referenced in above post
If the host you are using does have (or you can't find) adb/fastboot installing the following package may be beneficial: https://forum.xda-developers.com/showpost.php?p=42407269&postcount=1