[Q] AmeriCanAndroid - G sensor problem - HD2 Android Q&A, Help & Troubleshooting and Genera

I just installed AmeriCanAndroid and the G sensor ia not working. It's ok when I'm using WM 6.5 and i have no idea what can it be. Should I calibrate it in some way or somthing like that? how can i do it? I'm looking for settings to set it up and calibrate but I can't find it. Screen rotatnion is enabled.

aca has an active thread. post there please

Related

[APP]HTC G-Sensor Calibrator [calibration not saved on some devices]

Here is HTC G-Sensor Calibrator extracted from HTC Raphael, works as well on Diamond.
[EDIT] G-Sensor can't be calibred on Diamond since original driver doesn't consider calibration data... We need to port Raphael driver.
Diamond users, I am preparing a big surprise for you...
Enjoy!
Wow, that's awesome !
Thank You
Doesn't seem to work for me. Installed it and ran the calibration.
However, it seemed that it didn't save the calibration for me?
Using bElite 0.95.
It doen't work for me, orginal duch rom.
Its say calibration completed but the bubbels are still not in the middle.
Unfortunately for me too. On Italian Original ROM 1.37 it returns 'Calibration Completed' but after that the left-right bubble turn back un-aligned.
...
What kind a big surprise Schaps, i'm getting so curious!!!
I had the impression it was working the first time I tried... Am I wrong?
Ok I will investigate to get it fully working, I think it should be possible.
I get the same thing. The Horizontal bubble is spot on but the vertical is a tiny bit out.
When you correct it, it says its calibrated then the Vertical bubble goes back to where it was?
Strange.
Nice find tho.
Im using a standard Stock HTC Rom 1.37.405.1 WWE. Not a cooked Rom.
GalliKO said:
What kind a big surprise Schaps, i'm getting so curious!!!
Click to expand...
Click to collapse
You will know more this week-end...
schaps said:
You will know more this week-end...
Click to expand...
Click to collapse
Great, i love suprises! Thanks schaps for all your hardwork and discoveries. I speak for all the Diamond users on here im sure!
guys..how can we really make sure the phone is flat? i tried with my diamond cover off, but if u touch the edge of the phone, you still can feel actually its not firmly flatten right?
BTW..i tried out the calibration tool as well...after re-enter the calibration tool with 1st calibration done, the reading is out again
For me, it does calibrate my G-Sensor, but if i soft reset the device, it come back to the same setting
Schaps, it works flawless in my ATHENA using the X7510/Diamond ROM
Very impressive
Dear,
I try it on my HTC original 1.37.406.1 French the soft is beautiful but can't calibrabe. Hope it did in a few time because it seems to be usefull.
Thank you.
Sorry but no calibation on my german o2 XDA Diamond with the orginal Rom! But i´m sure you guys will solve the problem!
sergiopi said:
Schaps, it works flawless in my ATHENA using the X7510/Diamond ROM
Click to expand...
Click to collapse
The Athena has a LIS302DL G-sensor whereas the Diamond (and Raphael?) has a Kionix KXSD9.
This utility runs on my Diamond, but does not calibrate the sensor. Maybe this utility is only intended for a specific chip?
Will try it! Thanks
Hi schaps, since you are looking at the g sensor and the Raphael, is there any chance do you think of it being possible to get VueFlo working on the Diamond, or would it even be worth having? Looking forward to your surprise, I hope it's a rom! Thanks for your hard work.
Ok,
the software works for sure because it changes some registry keys under :
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\GSensor
It changes the "calibrateX-Y" keys that were all set at 0 before. I've spot it writes a very strange value for key Calibrate3-2, and I guess that's why the Gsensor driver does set them back to default values. I am trying to understand how it works right now.
EDIT: Noway!! The data in regsitry are always set to default on reset, the strange value could be a negative number in an unsigned rappresentation. The good news is that the calibration work 'til reset.
P.S.: Some of the masters could please be so gentle to advice me on what disassembler to use for ppc software ? I searched this forum but I got confused. Thanks a lot.
Calibration works but Diamond driver doesn't consider calibration data, so there is no way to calibrate Diamond G-sensor using original driver. We need Raphael driver since it will use calibration data stored in registry. I have tried to port this driver to Diamond since it has exactly the same accelerometer hardware, but it doesn't work... It may be because Diamond doesn't have keyboard (G-Sensor should be automatically stopped on Touch Pro when keyboard is out or when device is in low power mode).
uniqueboy said:
Hi schaps, since you are looking at the g sensor and the Raphael, is there any chance do you think of it being possible to get VueFlo working on the Diamond, or would it even be worth having? Looking forward to your surprise, I hope it's a rom! Thanks for your hard work.
Click to expand...
Click to collapse
VueFLO is part of my surprise
It works on few apps at the moment but I plan to support most of apps in the future (including IE and Opera of course).

HTC Touch2 (Mega) - does it have gsensor?

Hi.
I try to determine are my HTC Touch2 have GSensor.
I run some app using g sensor and it seams that part of them not work and part of them run but do not react on phone move.
I'm afraid that this phone don't have this sensor
definetly no, it dosn't have g sensor
I've got the AT&T Touch2 and mine's showing it has a G-Sensor. Oh snap!
Looking at specs on HTC site, shows a g sensor
Additional Features
- Motion G-Sensor
- Ambient Light Sensor
- FM Radio
http://www.htc.com/us/product/attpure/specification.html
Wrong specifications, diffrent phone.
This is the Touch 2, and except for the AT&T version that might have a G-sensor, the other verions do not have a G-sensor.
Hey! It is NOT same device. Lot of the differents between Touch2 and AT&T Pure. Like Camera resolution, sensors, etc.
yep, Touch2 doesn't have gsensor
G-sensor is hidden in the bottom of 3.5 phone socket...
HTC didn't equip it to all models, therefore it lacks in most of specifications.
To verify how it works go here:
HKLM\Software\HTC\HTCsensor\Gsensor
Change default value and try it
Andrew_KYIV said:
HKLM\Software\HTC\HTCsensor\Gsensor
Change default value and try it
Click to expand...
Click to collapse
What key to insert and which value to change? Be a little more precise, please...
g sensor
how can i go there ??
I dont even have the setting
What key and value shall be used here??? Mine shows blank...
I'm confused. So HTC Touch 2 (not the AT&T ver.) does or doesn't have the G-Sensor?
I'm about to buy it, so it'd be nice to know.
Default , T3333 / MEGA / Touch2 DOES NOT HAVE G-SENSOR !
Please use SEARCH
it is more simple to search for an issue then to ask it all over again, so please try to search first !!!!
raulg said:
it is more simple to search for an issue then to ask it all over again, so please try to search first !!!!
Click to expand...
Click to collapse
Cant agree more, there is a description all over the internet, NO G-SENSOR
Thread Closed
In fact it was joke prepared to 1APR
HTC Mega was assuming to have G-sensor but HTC decided to spare on Touches.
Mega has no G sensor. Quoted registry entry is supposed to be present at any WM phone.

Battery drain quickly after install Win Mo 6.5

Hello,
I'm from indonesia and buy HTC TD 2 in indonesia too. After upgrade ROM to Win Mo 6.5 (HTC Official) why my battery drain quickly than using Win Mo 6.1(HTC Official). Where is the problem ? is WinMo 6.5 ?, then how to solve it ?.
Just in case if i install non-official ROM, how about HTC official waranty ? is it end when i was installed non-official ROM ?
List of installed software :
Xperia X1 Battery icon
TD 2 Tools
NueRom Dynamic Clock
Thank's
You could try installing HD Tweak and enable the powersaving option.
It helped quite a bit for me.
http://montecristoff.webs.com/hdtweak.htm
Still On Problem
Anyway, thanks lektroluv for your help. but it doesn't solve the problem .
lektroluv said:
You could try installing HD Tweak and enable the powersaving option.
It helped quite a bit for me.
http://montecristoff.webs.com/hdtweak.htm
Click to expand...
Click to collapse
That is HD2 Tweak, not is for our TD2....For TD2 is in sticky post:
TD2 Tools (Release 2c)
well, you know the weather animation from the main screen? Well, every time you update the weather, it connects to GPS to get the location and, as I was told ... the GPS remains open and drains the battery. After searching for a solution, in settings there is something: not to allow programs to connect to GPS when needed: settings - location - thick automatically decline location service in all HTC software that attempts to use location. Ans should solve problem. Please post reply.

[SOLVED]Topaz WM6.5.5 camera problem

I cooked my rom using the latest Da G WM6.5.5 SYS
All works fine, except the htc camera.
Wen I open my camera, all is fine, but if I take a picture or if I take a landscape picture, wen the camera rotates the screen is all black, sometimes all I can see is a little square in the middle of the screen.
Does anybody knows of a fix?
btw: im using the latest S2 drivers and packages
See screen shots attached.
Thanks and regards
MOD Edit: Solved issue
i have the same issue with the HTC mega camera but i nevertake it so much importance due to the dependacies in htc mega pkgs... this is interesting
what sensor sdk are you using....the one from S2 that matches camera?
Thanks for the reply.
Yes iam using the sensor sdk from the s2 rom that matches the camera, in fact im using all the ext packages from the s2 rom.
In WM6,5 (com3 I think) it works fine, just in wm6.5.5 that this happens.
madsurfer1 said:
Thanks for the reply.
Yes iam using the sensor sdk from the s2 rom that matches the camera, in fact im using all the ext packages from the s2 rom.
In WM6,5 (com3 I think) it works fine, just in wm6.5.5 that this happens.
Click to expand...
Click to collapse
i guess its possible that it could be the sensor sdk you are using not being compatible with wm 6.5.5, you should at least try the one from rhodium 2.07 and see if it works...i dont have this problem with rhodium S2. also you could try another camera from topaz that you know has worked for you in the past..maybe an older one and see if it will work with your current configuration to help narrow down the problem.
Hi,
Maybe you can try Topaz camera instead of Rhodium.
If I'm not mistaking the camera is depended on streamingsdk, mhub and dshow as well.
I finally got the camera to work proper
I had some auto gyrator reg edits messing with it
Thanks for the help guys
Regards
Hiii there, i have same problem with my HD, could you teach me step by step how to fix this problem? Big thanks to you all, master..

[Q] Keypad LED Control

Hi there.
In Win 6.5 there was an app called "Keypad LED Control". With this app, you could have the Keypad light automatically switched on while the touchscreen is on.
Im looking for a similar App for Android (Gingerbread) but havent found anything like that in the market or the forum, anyone has an idea?
Maybe you should try to post in the HD2 Android Section...

Categories

Resources