I have just got my hands on an ASUS transformer tablet . Now I thought ok it's wifi only thats fine I can tether it to my little tattoo and use 3g that way.
Problem is I didn't realise that Android doesn't see adhoc networks to connect to them. So I want my wireless tether to work in infrastrusture mode instead of adhoc.
I've been searching and seen this done for other phones but can't seem find a way to do it on the tattoo/click.
Has anyone found a way to do this?
Well there is a wifi tether app on market wich does the job...with that app your tattoo works like AP for 3G network. Also i think that your tattoo must be rooted.
kejd said:
Well there is a wifi tether app on market wich does the job...with that app your tattoo works like AP for 3G network. Also i think that your tattoo must be rooted.
Click to expand...
Click to collapse
I'm already using it. Version 2.0.7. but it broadcasts in adhoc mode so the tablet won't even see it.
Well i dont know what to say, my laptop work just fine with wifi tether app on my tattoo.
It will do. Mine to because laptops can see adhoc networks.
Or is there a way to enable android native tether instead of using an app. I've read somewhere that works in infrastructure mode.
em0hawk said:
It will do. Mine to because laptops can see adhoc networks.
Or is there a way to enable android native tether instead of using an app. I've read somewhere that works in infrastructure mode.
Click to expand...
Click to collapse
I have a similar problem too! It seems that nothing but computers can see ad-hoc networks. So, my Kindle, my Xoom, and other smartphones can't access the network through tethering. Is there a way to make wifi work in infrastructure mode?
Nobody else have had such a problem?
Have you tried this setting?
Wireless Tether:
- Install Wireles Tether from market
- Run app
- Press on init "tethering"
- go to "menu" -> "settings"
- Enable "Wifi-Encryption" For safety...
- Change "Passphrase" (13 chars)
- Change SSID if you want
Yes, I tried: that creates a wep-protected ad-hoc network...
Sent from my HTC Tattoo using XDA App
Related
Hi, im in need of some assistance. I have a new android device, the Archos 5IT. my phone is the Tilt 2. i have been unable to get my tilt 2 tethered to it thru wifi. reason being that the xda wifi router app uses adhoc mode. the archos will only see Infrastructure connections. Someone on the archos forum said the HD2 has built in a wifi tethering app that is infrastructure mode. Can someone plz direct me to that app or another wifi tethering app that uses Infrastructure mode only? also, free apps...lol thnkx in advance i figure if i download that app, ill be good, and wont have to take this device back. plus its giving me probs trying to connect thru bt also. lol FIGURES
If you can't find a free one, I recommend WMWifiRouter (v2 and above). It lets you connect multiple devices via Wifi (infrastructure style) and Bluetooth, as well as work as a USB modem and a USB Wifi dongle.
If you have Omarket installed, just download "Mobile Wi-Fi Router." It works GREAT!
Sorry about reviving an old thread. I've been searching and trying to find this exact solution, but neither of the ones listed here are doing "Infrastructure" mode. I'm currently testing WMWifiRouter (v2.0 - build 1502, downloaded directly from their site today) and when I set up the wifi connection, it only gives an option for Ad-Hoc (or none - which is for connecting to another access-point).
Am I missing something with WMWifiRouter, or is there any other app at all that will do Infrastructure mode? I don't mind having to buy something, I just need it working.
Thanks!
JackMetal said:
Sorry about reviving an old thread. I've been searching and trying to find this exact solution, but neither of the ones listed here are doing "Infrastructure" mode. I'm currently testing WMWifiRouter (v2.0 - build 1502, downloaded directly from their site today) and when I set up the wifi connection, it only gives an option for Ad-Hoc (or none - which is for connecting to another access-point).
Am I missing something with WMWifiRouter, or is there any other app at all that will do Infrastructure mode? I don't mind having to buy something, I just need it working.
Thanks!
Click to expand...
Click to collapse
Sorry if I am not clear with your issues above.
But, Winmo 6.5 in HD2, has a native wifi tethering application.
There is an option menu (in Comm Manager) to turn on the Wifi Router.
This will make your HD2 as an Access Point. It can accept 5 devices.
Cheers..
Yes but only in adhoc mode, not in infrastructure mode, which appears to be needed for connecting some devices like psp and my new HTC flyer!
Same problem with GT 10.1 and HTC HD2
I have the wifi router program but it's not working with my galaxy tab 10.1, how can i tell if its adhoc or infrastructure signal?
total noob said:
I have the wifi router program but it's not working with my galaxy tab 10.1, how can i tell if its adhoc or infrastructure signal?
Click to expand...
Click to collapse
Hi, I am researching this as well, and here is what I have found so far.
1. Android does not currently support/connect to ad-hoc WiFi, only Infrastructure mode.
2. If your Android tablet device can not see the WiFi from your phone hotspot but a PC Can, then it is probably ad-hoc, as my WinMo HTC HD2 is.
3. I have an Asus Transformer tablet with Android 3.1 and this can not see my WiFi from the WiFi hotspot settings, but my PC can see it and connect to the HD2.
4. If there is an Android ROM for your phone, (XDA Forums) that will run from the SD card, you can boot into that and use the WiFi hotspot (Tethering) from the Android ROM. This seems to work fine on my setup.
Hope this helps
really would rather not root if at all possible
since i live in fear of ending up with a very expensive brick (by messing up rooting my xoom) - has anyone come up with a way to make the winmo htc hd2 send out an infrastructure wifi signal?
eibhis said:
since i live in fear of ending up with a very expensive brick (by messing up rooting my xoom) - has anyone come up with a way to make the winmo htc hd2 send out an infrastructure wifi signal?
Click to expand...
Click to collapse
Simple answer is no. Winmo 6.5 will not do infrastructure wifi hotspot, no matter whether native Winmo app or a 3rd party app (i.e., WMWifirouter). You're going to have to do what I'm doing with my HD2. Go thru the learning process of installing an Android build on your SD card, and then boot into Android. You've very little risk of bricking the HD2 if you read carefully and follow the guides. [However, these guides are definitely written by geeks, not editors who write and re-write to be explicitly clear.] Supposedly, the Android Wifi router is infrastructure, but I've not yet gotten to that point in my own process. The first one I tried to install (AmeriCanAndroid) didn't complete booting up successfully, so I tried another Android build (MIUI), but in it I'm not finding a wifi tethering app. And, in it, the Market app is crashing. So, I'm now on the search for a 3rd Android build. The payoff is big (wifi tethering to my Viewpad 7 tablet), so I persevere. Good luck to you on your journey.
After rooting my phone I figured i would give the hotspot a shot. But when i try to browse on my ipad it brings me to the VZW self provision broadband page.
I normally use wifi tether, but i would rather be able to use the built in because its an infasture netowork vs the ad-hoc wifi tether gives me.
Not the case
Festaman said:
After rooting my phone I figured i would give the hotspot a shot. But when i try to browse on my ipad it brings me to the VZW self provision broadband page.
I normally use wifi tether, but i would rather be able to use the built in because its an infasture netowork vs the ad-hoc wifi tether gives me.
Click to expand...
Click to collapse
actually your right and your wrong at the same time sadly; your right about the infrastructure network vs ad-hoc, but wrong about the 3g hotspot app vs. tethering & portable hotspot not an app.
The 3g hotspot app is a verizon product not googles in the sense your looking at.
The tethering & portable hotspot should have been activated in wireless & networks section, right between "Bluetooth setting & VPN settings" from a froyo(2.2) google standpoint but in our case its not even there.
Hope this clears up the mistakes about froyo tethering & portable hotspot and verizon 3g mobile hotspot app.
Yes it does thanks! I have a nexus one So i know what your talking about.
rooted
if your rooted.. download "wireless tether for rooted" wam bam thank you mam.. all done..
xdaadmin said:
if your rooted.. download "wireless tether for rooted" wam bam thank you mam.. all done..
Click to expand...
Click to collapse
he stated in the post that he was rooted, he just wanted to use the native tethering application.
Does this mean that if we can get a vanilla Froyo or a custom ROM compiled from source that we'll have the true Android hotspot?
xdaadmin said:
if your rooted.. download "wireless tether for rooted" wam bam thank you mam.. all done..
Click to expand...
Click to collapse
That's all fine and well except that the wifi tether app runs in adhoc mode not infrastructure.
Sent from my DROIDX using XDA App
Post deleted.
10 char
why do not you just use pdanet from market?
There was a new experimental Wifi Tether build that was released dismorning bringing it up to Pre9. I was unable to find a change log, still adhoc?
fuzio1963 said:
why do not you just use pdanet from market?
Click to expand...
Click to collapse
Pdanet creates an ad hoc network just like every other third party app.
Sent from my DROIDX using XDA App
If its just the one computer you are logging on with use the BT method very easy and works quite well for free and even on non-rooted phone
Trying to use Wifi Tether (google) app in rooted Vibrant (http://code.google.com/p/android-wifi-tether/downloads/list?can=2&q=NexusOne)
Everything setup correct and works good on the phone itself. Laptop shows the connection as 'computer-to-computer' network rather than 'wireless network'. Although signal strengh is very good laptop just says "waiting for network..." and never connects. How to change Wifi Tether setting to show as 'wireless network' instead of 'computer-to-computer' network so that it will connect?
You should load the mobile AP patch instead. Works much better than the wifi tether app on the vibrant.
Shane_pcs said:
You should load the mobile AP patch instead. Works much better than the wifi tether app on the vibrant.
Click to expand...
Click to collapse
yes. mobileap is like 100 times better!
+1 for mobile ap flash.
I ran wireless tether app forever on my G1 and like this much better.
Sent from my SGH-T959 using XDA App
thanks for replying guys..i went to the mobile AP flash thread and read that you have to do clockwork recovery to flash it. I think when froyo update happens its gonna disable mobile AP flash?? I see people saying (and even Youtube videos) of using Wifi tether and Barnacle wifi legacy to tether from Vibrant. I tried both of them and they show as 'compter-to-computer' network on laptop and it wont connect.
You should delete everything & start from the beginning. If that doesn't work then try it on someone else laptop to see if that's the problem if not is your phone. Maybe is a problem the way u rooted your phone. If it continues doing it on the other laptop u are testing it. Most deff is your phone.
Froyo has wireless AP built in by default. We have yet to know if T-mobile will disable it. If they do, someone will just hack it back in.
Interesting. I prefer wireless tether. I think it works much better than the MobileAP.
So this turns out to be an issue with my laptop. Laptop is not able to connect to ad-hoc (computer to computer) wifi networks. Both wifi tethering app and Barnacle worked on a friends laptop. Got around 2 Mbps from T-mobile 3G.
I did have to update the driver for the wireless chip on one laptop to support ad-hoc networks, but it was worth it. If you're interested, check your wireless chip manufacturer's site for a newer driver.
The TMO sales-droids told me that the froyo update would enable the wireless hotspot (MobileAP), but who knows till we actually get it. Even if it does, if it works like the MobileAP does now, I'll continue using wireless-tether.
Shane_pcs said:
You should load the mobile AP patch instead. Works much better than the wifi tether app on the vibrant.
Click to expand...
Click to collapse
MobileAP didn't work for me. Win7 showed no internet activity.
Wireless Tether on the other hand worked perfectly, so YMMV.
Does anyone has a problem while using mobile AP while the connection is steady but after the screen dims or locks up the speed slows down and sometimes cut off the tether to the device? would there be anyway around this?
shootr said:
I did have to update the driver for the wireless chip on one laptop to support ad-hoc networks, but it was worth it. If you're interested, check your wireless chip manufacturer's site for a newer driver.
Click to expand...
Click to collapse
That did the trick! Thanks mate
I have a question about tethering I'm trying to use the wifi for my gaming console (ps3). It doesn't recongize the ip address. So will it recongize it when the update comes or will it not work for gaming consoles.
Sent from my SGH-T959 using XDA App
maybe a dumb question but i rooted girl's vibrant and flashed mobileAP which worked great the first day. i couldnt get barnacle or google's wireless tether to actually connect to anything. But now she's trying to use it today and it won't connect due to DNS issues. Would it be the phone at fault or the laptop? I already tried refreshing the IP using command prompt but it didn't help.
so with my minimal knowledge of phone stuffs ive kinda learned that when i run the wireless tether for root app on my phone it uses ad hoc to supply other computers with internet... basically im asking, will my evo be able to supply my xoom with internet?
Not at the moment, no support for Ad-Hoc networks in HC, not sure if there ever will be - very annoying.
I'm not sure but I believe there is a new version of Wireless Tether that will allow such a connection. When I first tried the Kindle connecting to my DX, it wouldn't connect. With the new version, it does.
Sent from my DROIDX using XDA App
My Xoom connects to my DX with no problems.
Go download Wireless Tether from the website. The experimental one is called Wifi Tether now. Works like a charm for infrastructure mode so that the Xoom can tether with your phone. Also Bluetooth seems to work fine as well.
Sent from my DROIDX using Tapatalk
Is the Wireless tether for the phone or the Xoom (or both)? I need an option for the iPhone in case the steps posted here won't work!
is this an app that enables ad-hoc detection on the Xoom,
or
does it just provide a full wifi hotspot tethering feature for Android devices?
I also use an iPhone which supplies an ad-hoc hotspot connection that I need my Xoom to recognize and connect to.
So does that mean you got it to work that way? Is the app available through the Market?
No its not available in the market. Google wireless tether and look for wifi tether. The new app sends the signal via infrastructure mode. I think it applies to certain phone like Droid X and EVO.
Sent from my DROIDX using Tapatalk
The Wireless Tether app is ran on the host phone wanting to be turned into a wifi hotspot. There are certain phones that run in Ad-Hoc mode in default (aka Droid 1) and the only option to tether the Xoom to them is via bluetooth. As others have said, the new version "WiFi Tether" is apparently enabling infrastructure mode rather than Ad-hoc mode, something that the Xoom can actually connect to.
There is no app that you install on the Xoom. When the WiFi Tether is ran on the host device, the Xoom just connects to it as a WiFi router and works just fine (or bluetooth if thats what you're doing).
So OP, if you can't get the new version of WiFi tether to work for you and your Xoom, try the Bluetooth tethering option, it's been shown in detail in a thread here how to do it, and it should work just fine.
funnycreature said:
Is the Wireless tether for the phone or the Xoom (or both)? I need an option for the iPhone in case the steps posted here won't work!
Click to expand...
Click to collapse
The app is for android, and for the host device not the Xoom, so you'll need to Bluetooth tether your iPhone.
wpa_supplicant
I understand exactly what the OP is talking about, as i'm trying to do the same thing. What makes matters worse, is that ad-hoc connections ARE possible in android. Meaning android can connect to ad-hoc networks, but it requires swapping out the wpa_suppplicant file in system/bin with a modified one that doesn't filter out ad-hoc networks.
i've even tested this on my EVO, and it connects to other android phones incapable of broadcasting in infrastructure mode, it even connects to my ubuntu netbook broadcasting in ad-hoc...
(if you want to see what i'm talking, just search the forums for wpa_supplicant, something will turn up )
I've tried doing the same "fix" with my xoom, but it doesn't take. Using ADB or root explorer, i've replaced the orignal (making sure to save a copy just in case) and fixed permissions to 775, but it doesn't take. The wifi antenna will turn on, but it doesn't find anything once being replaced, not even saved networks or access points. I can get wifi back by restoring my backup, but i'm at a loss as to why it doesn't work on the xoom (3.0) but does with my evo (2.3).
as a side note, i'm using the right replacement for the wpa version returned by entering
"wpa_supplicant -v" in a terminal emulator or adb. It returns version v0.6.10 and there is a working, modified, v0.6.10 that should make things work, but doesn't....
anyway, if anyone has any input, i would love to hear it!
I am in the same boat. Regardless of whatever permission settings I have tried (mentioned in the dev forums that I can't yet post in), I still get a dead wifi with the new supplicant file.
Ah, I feel better now. It must have been the supplicant file, as I found this other one and it worked without permission modifications first time out.
You will have to google "xoom supplicant" and use the file found on the first response (android.net)-I can't post the link- the downside to attitude having, overlord type forums is inability for new users to provide any help, or at least with any convenience.
i try connecting my xoom to my computer, and it wouldn't work. i have the "Intel My Wifi Technology" but each time i set up a connection, the xoom finds it, but will take like a minute trying to connect and all i see on the xoom is "Obtaining IP address". it shows on my computer that a new device is connected. maybe this only works computer to computer. cuz i have had success with another laptop connecting to my computer with no problem.
I am using the Launchpad kernel and the WPASupplicant file and am connected to my phone's ad-Hoc network now. I used the beta Wi-Fi Tether and it worked great, but crashed my Samsung Galaxy S at least twice a day. So I installed the WPA file without setting any special permissions, just used Root Explorer to copy it an it worked fine.
Is there a way to connect on a ad-hoc hostet by a laptop (win7) yet?
That would be interesting, cause if it work this way, it will work for every phone or something else!
Hey Guys,
i am having a little problem. i am using the Intel My Wifi Technology. and i don't know if i am doiing something wrong or this is just not possible. but i try connecting my xoom to my laptop, and it is not working or connecting. i get a message on the xoom that say's Obtaining IP address", but nothing happen on the xoom. is this not yet possible on the xoom. i don't know if this is consider ad-hoc network or not, cuz i am new to all this.
but here is the link to intel website for the program i am using as a wifi hotspot.
http://www.intel.com/products/wireless/mywifi.htm
and here is a video of what the program does.
http://www.youtube.com/watch?v=AuAQjR76A68
anyone with knowlwdge on this please help me understand what i am doing wrong or not doing. or even if this is a possibility.
If you're not opposed to rooting your Xoom, here's another option. I just unlocked and rooted my WiFi-only Xoom yesterday, and inserted the supplicant file in this thread: http://forum.xda-developers.com/showthread.php?t=1033314
It works like a charm! I'm running a WinMo Touch Pro 2 with WMWiFiRouter, and the Xoom now sees and properly connects to Ad Hoc networks. And, it still works with all other networks.
I don't know which way you prefer to attack the problem (from the Xoom or the phone), but I've been thrilled ever since I got all this done yesterday. Everything else on the Xoom is great, and now I've got the working SD card as well.
supremecream06 said:
Hey Guys,
i am having a little problem. i am using the Intel My Wifi Technology. and i don't know if i am doiing something wrong or this is just not possible. but i try connecting my xoom to my laptop, and it is not working or connecting. i get a message on the xoom that say's Obtaining IP address", but nothing happen on the xoom. is this not yet possible on the xoom. i don't know if this is consider ad-hoc network or not, cuz i am new to all this.
but here is the link to intel website for the program i am using as a wifi hotspot.
http://www.intel.com/products/wireless/mywifi.htm
and here is a video of what the program does.
http://www.youtube.com/watch?v=AuAQjR76A68
anyone with knowlwdge on this please help me understand what i am doing wrong or not doing. or even if this is a possibility.
Click to expand...
Click to collapse
Is it right that you host a Wifi on your computer and tether internet to you tablet? I think its the usual problem android and ad-hoch, witch not work!
Hello everyone,
As we all know, Honeycomb out of the box does not support/enable connecting to Adhoc networks, which many WiFi tether programs use.
There is a fix out there for the Nook color, and previous Android versions, but they do not appear to work for the Tranformer (tried both the .zip and manually but not the manual method).
I am unknowledgeable with the Android OS, and would really like to figure out a way to make my Transformer connect to an Adhoc network.
Any links or comments is appreciated!
Thank you.
Me to,
I just tried to Wifi tether to my Droid and it didn't work. I have no trouble doing the same with my Viewsonic Gtab. I know i'm using Gingerbread on the Gtab and not Honeycomb, but a solution to this problem would be great.
The newer wifi tether supports infrastructure mode
Kippui said:
The newer wifi tether supports infrastructure mode
Click to expand...
Click to collapse
This is true, and I was able to get it to tether by upgrading and using infrastructure mode, but I believe there are many things such as some corporate networks that use Adhoc.
Lintrix said:
This is true, and I was able to get it to tether by upgrading and using infrastructure mode, but I believe there are many things such as some corporate networks that use Adhoc.
Click to expand...
Click to collapse
I seriously doubt that many corporate networks are using adhoc Wifi networks!
Out of the box, Android doesn't support adhoc networks, but it can usually be enabled by editing the wpa_supplicant.conf file on rooted devices.
Regards,
Dave
foxmeister said:
I seriously doubt that many corporate networks are using adhoc Wifi networks!
Out of the box, Android doesn't support adhoc networks, but it can usually be enabled by editing the wpa_supplicant.conf file on rooted devices.
Regards,
Dave
Click to expand...
Click to collapse
would you be so kind in pointing us to the right direction? PLEASE
has anyone been able to find a way to make this happen yet ?
I would like to get an adhoc network between the Transformer and HD2 (wm6.5) and get internet access while out on the road.
here you are.. instructions for enabling ad hoc on the transformer
http://forum.xda-developers.com/showthread.php?t=1093778
i havent personally tested it.. but it should work i would think
or you could try to bluetooth tether
pilotbluemike said:
here you are.. instructions for enabling ad hoc on the transformer
http://forum.xda-developers.com/showthread.php?t=1093778
i havent personally tested it.. but it should work i would think
or you could try to bluetooth tether
Click to expand...
Click to collapse
I have and it works well. It does require root access, just follow below guide for root
http://forum.xda-developers.com/showthread.php?t=1106587