Database Users

CONFIRMED CRC1 can be rooted! Downgraded anyhow :)

I have tested the rooting of the G1 with the CRC1 update (with my boss`s phone ) He accidently got the update and installed it yesterday on his non-rooted G1 and while we were at work tonight we flashed it back down to the RC29 with NO troubles at all ... only thing left to do was download the spl and the recovery image and type telnetd, download telnet connect to local host, and run some script... which all should work just fine since it did let us downgrade. I havent seen anyone here or on google that has tried that yet so I wanted to let everyone know it will let you downgrade to the lower version.
Now if you have a rooted phone and install the update .. you will more than likely loose the root .... but you should be able to get root back by re-rooting the phone and going with a non CRC version until a modified image comes out.
OK we finished the rooting today and it flashed with the new ROM and everything. It now is on the JF1.51MOD with the updated radio.

Yup, read this post:
http://forum.xda-developers.com/showthread.php?t=538536
and this post:
http://forum.xda-developers.com/showthread.php?t=538456
/Close

andonnguyen said:
yup, read this post:
http://forum.xda-developers.com/showthread.php?t=538536
and this post:
http://forum.xda-developers.com/showthread.php?t=538456
/close
Click to expand...
Click to collapse
NEITHER of these 2 threads say anything about anyone testing or confirming that you can downgrade FROM CRC1 and get root again.... the JF thread is saying pretty much dont install it and if you do it wont update anyhow. The other thread was cyogen making an altered CRC1 version that has been patched for updating.
Still no threads like this one that I found
/OPEN

Strapt said:
until a modified image comes out.
Click to expand...
Click to collapse
Which JF will come out with, as posted in my previous post, but good to know that its still downgradable (is that even a word?) to RC29. This thread should be posted in the general Dream section BTW, as its not pertaining to any development topics.
/CLOSE
LULZ.

andonnguyen said:
Which JF will come out with, as posted in my previous post, but good to know that its still downgradable (is that even a word?) to RC29.
Click to expand...
Click to collapse
ya which will be nice when he does come out with it so people can run the phone with that version .. but this inst about who is going to be comming out with a modified image to KEEP root access ...This is to rest peoples fears about NOT being able to re-root the phone if they accept the CRC1 update or not able to root it in the first place... which no one has seemed to have tried/confirmed until now. and .. downgradeable a word?..well ... it is now!

Strapt said:
ya which will be nice when he does come out with it so people can run the phone with that version .. but this inst about who is going to be comming out with a modified image to KEEP root access ...This is to rest peoples fears about NOT being able to re-root the phone if they accept the CRC1 update or not able to root it in the first place... which no one has seemed to have tried/confirmed until now. and .. downgradeable a word?..well ... it is now!
Click to expand...
Click to collapse
So yeah I'm just upping my post count now since I'm bored. lol. Mmm, family guy is funny.

Strange...as far as I know, I have been able to downgrade to RC29 from all official releases, RC30, RC33 and 1.5, since I have had 4 separate G1's since initial release (I'm extremely clumsy and rough with my phones sometime - usually halfway through a bottle of scotch).
Hmm.
Nevermind - apparently alcohol also affects my ability to read thoroughly.

so,here's what I did, I accepted the cr1 update on my stock 1.5 stock g1,
then, I downgraded to RC29 with no problems at all, I also followed the instructions and rooted my phone ( apparently ), after that, I tried to flash a few different roms, but none would load, my g1 will always freeze at the G1 screen, until I install back the stock rom again,
am I doing something wrong?
'cuz am not that new at this, and I feel stupid.

There was never any question of it.
The only firmware known to be easily rooted is RC29.
Downgrading to RC29 is completely independent of what firmware version is actually ON the device -- it is strictly related to SPL version. Since CRC1 is an OS update and NOT an SPL update, it can't possibly have any affect on whether or not you can downgrade to RC29, hence it definitely CAN still be rooted when CRC1 is installed.

funny...
i was at a friends house last night and he wanted me to root his g1. i was there for hours trying to figure out why i couldnt get the bootloader screen to switch to grey. I downloaded DREAIMG.nbh from several sources with several different sdcards. i even have a dedicated card i named ROOTER with all the neccessary files and updates but couldnt get nothing cooking.

el_plebillo said:
so,here's what I did, I accepted the cr1 update on my stock 1.5 stock g1,
then, I downgraded to RC29 with no problems at all, I also followed the instructions and rooted my phone ( apparently ), after that, I tried to flash a few different roms, but none would load, my g1 will always freeze at the G1 screen, until I install back the stock rom again,
am I doing something wrong?
'cuz am not that new at this, and I feel stupid.
Click to expand...
Click to collapse
what ROM are you going to?? if its Hero you HAVE to have the latest spl. If it has autoappsstosd you need to have your sdcrd partitioned right (fat32 first and then ext2) I recommend using the sdsplit method.

oneG said:
funny...
i was at a friends house last night and he wanted me to root his g1. i was there for hours trying to figure out why i couldnt get the bootloader screen to switch to grey. I downloaded DREAIMG.nbh from several sources with several different sdcards. i even have a dedicated card i named ROOTER with all the neccessary files and updates but couldnt get nothing cooking.
Click to expand...
Click to collapse
hmm intersting .. the only time I have seen that is if someone was placing the entire.zip file on the sd card instead of just the DREAMING.nhb file on there. I would just reformat the card to fat32 and place that file only on it again and then try it again and see if anything goes different. Dont know if it makes a difference but i got the DREAMING.nhb off the how to root the g1

Strapt said:
I would just reformat the card to fat32 and place that file only on it again and then try it again and see if anything goes different. Dont know if it makes a difference but i got the DREAMING.nhb off the how to root the g1
Click to expand...
Click to collapse
Yeah that was my initial reaction but to no avail. Like i said earlier, i tried dl the img. from several sources.
Anyway he's not that into his G1 as much as we here are and like my g/f, despite the many features its capable of, only uses it for calls and text. He's excited about tethering tho but kinda paranoid with all that could go wrong like bricking and all that, so yesterday he was a little reluctant for a second attempt due to the day before's problematic flash. I did happen to get his phone to start ringing again without the call going stragiht to voicemail and the lock screen works now, which was the real reason i was over there in the first place.
But as far as root and CRC1 go, i might sneek my g/f's G1 away so i can test there

oneG said:
Yeah that was my initial reaction but to no avail. Like i said earlier, i tried dl the img. from several sources.
Anyway he's not that into his G1 as much as we here are and like my g/f, despite the many features its capable of, only uses it for calls and text. He's excited about tethering tho but kinda paranoid with all that could go wrong like bricking and all that, so yesterday he was a little reluctant for a second attempt due to the day before's problematic flash. I did happen to get his phone to start ringing again without the call going stragiht to voicemail and the lock screen works now, which was the real reason i was over there in the first place.
But as far as root and CRC1 go, i might sneek my g/f's G1 away so i can test there
Click to expand...
Click to collapse
lol ya you should take her and try ... I finished rooting my boss`s CRC1 yesterday. after flashing the .nhb file we added the JF1.51MOD thats found on lucids page .. mainly because it has the radio and the rom in one update. But anyhow he has a rooted G1 straight from CRC1 ... wonder what radio you guys had on that phone and if it needed to be updated before going to the ROM you chose

I needed this!
I needed to root a friends phone. He just bought it, and it had RC29. By the time he got to me, it was CRC1. Regardless, I found this post which showed it worked.
I flashed RC29, Then rooted it. Flashed latest radio, CM 1.4 Recovery, then JF1.50, and finally CM 3.9.7.
It worked beautifully! Thanks for the confirmation post!

SoTacMatt said:
I needed to root a friends phone. He just bought it, and it had RC29. By the time he got to me, it was CRC1. Regardless, I found this post which showed it worked.
I flashed RC29, Then rooted it. Flashed latest radio, CM 1.4 Recovery, then JF1.50, and finally CM 3.9.7.
It worked beautifully! Thanks for the confirmation post!
Click to expand...
Click to collapse
You are very welcome!! Thats why I posted it to let people know that they werent screwed when/if they got the Crc1 update. Glad that it went well for you!

I just got a g1 (and use linux since 1999), and LOVE this phone...sofar.
i would want to root it, and plan to.
i have the 1.5 firmware, and crc1 and am planning this on saturday.
is there a way to take screen shots of it all ? (from the phone)
any tips/ links etc is appreciated.
"run linux, stay happy".
Bellevue Washington
doing the root in Kirkland
Pizza or soda (or beer) on me.

[Q] 2.2 Froyo won't load - Incredible

Hey,
I'm a "noob" and not SUPER technically advanced when it comes to phones, but I have a decent idea how to do things with it.
I got an Incredible used from someone and it was already rooted by him. I was told the other night that you need to have the phone unrooted in order to get the official OTA 2.2 update. That night I attempted to unroot it, but turns out I was doing it wrong. I went to bed, and woke up with the OTA update on my phone asking if I wanted to install it, so I said Install Now, and it went to the Boot screen and I dont know if I did something wrong, or it just wouldnt work because my phone was rooted.
So now, 3 days later I've got it Unrooted finally, and I've tried several different update.zip files that I've downloaded from different forums, etc. None of them will work, and they all say Installation Aborted.
Also, when I am in the recovery screen, it says E: Can't open /cache/recovery/command
I've tried several different sd cards thinking that was the problem, and same failure everytime. I have a feeling it is my phone itself..
Any ideas, help, advice??
Greatly appreciated..

bbrown35 said:
Hey,
I'm a "noob" and not SUPER technically advanced when it comes to phones, but I have a decent idea how to do things with it.
I got an Incredible used from someone and it was already rooted by him. I was told the other night that you need to have the phone unrooted in order to get the official OTA 2.2 update. That night I attempted to unroot it, but turns out I was doing it wrong. I went to bed, and woke up with the OTA update on my phone asking if I wanted to install it, so I said Install Now, and it went to the Boot screen and I dont know if I did something wrong, or it just wouldnt work because my phone was rooted.
So now, 3 days later I've got it Unrooted finally, and I've tried several different update.zip files that I've downloaded from different forums, etc. None of them will work, and they all say Installation Aborted.
Also, when I am in the recovery screen, it says E: Can't open /cache/recovery/command
I've tried several different sd cards thinking that was the problem, and same failure everytime. I have a feeling it is my phone itself..
Any ideas, help, advice??
Greatly appreciated..
Click to expand...
Click to collapse
Just download the Verizon 2.2 Froyo update RUU. Run it on your computer with your phone connected and you'll get it. You didn't need to unroot either cause it will automatically zap that.

ejdavis72 said:
Just download the Verizon 2.2 Froyo update RUU. Run it on your computer with your phone connected and you'll get it. You didn't need to unroot either cause it will automatically zap that.
Click to expand...
Click to collapse
Hey, sorry but I don't know what an RUU is, and where/how I get it.. also, I have a macbook, is that a problem?
Thanks!

bbrown35 said:
Hey, sorry but I don't know what an RUU is, and where/how I get it.. also, I have a macbook, is that a problem?
Thanks!
Click to expand...
Click to collapse
I'm not sure if Mac is a problem but I'm sure you can find someone with a PC that will let you use it. I will private message you the link cause xda won't let me post a link here cause I'm too new to the forums. Check your inbox.

How to root HTC Glacier (My Touch 4G) step by step ?

Can somebody tell me how to root a my touch 4g ? I'm kinda new at this and want to learn.

chitopr said:
Can somebody tell me how to root a my touch 4g ? I'm kinda new at this and want to learn.
Click to expand...
Click to collapse
Google VISIONary (r14) place it on your device, install it then run it. Temproot is for temporary rooting your device, its gone after a reboot, permaroot is for good, unless you use the unroot option.
Its safe, fast and easy. I use temproot option so I can use some root only apps. This is the first device I have felt no need to add a custom rom to or anything so VISIONary was the choice for me. If you want the long harder way directions can be provided. I do recommand you learn the long hard way at some point, its good to know your way around just in case.

chitopr said:
Can somebody tell me how to root a my touch 4g ? I'm kinda new at this and want to learn.
Click to expand...
Click to collapse
first of all rooting is not for everyone. I can name a few people in a few forums that do not run a rooted phone for one reason or another. Rooting your phone gives you possibilities that are not even considered when you are in a stock form. But on the other hand you can seriously damage your phone, with the possibility of it ending up a 500.00 paper weight.
The safest and easiest thing to do is download VISIONary.apk and just use temp root. That will give you the ability to do everything you need to do in a root status w/o risking FUBARing anything. You can wi-fi tether, run Titanium Backup and stuff like that.
If you are wanting to go full blown and root it w/ s=off and do the
you can do it the real way and follow Cyanogen's method
Or you can do via the TheUnlockr for a simpler way.

If I temp-root it, would I have to temp-root it every time I want to run the wifi-tether program? Or just on installation?

http://forum.xda-developers.com/showthread.php?t=858996

I have been trying to get visionary r14 but i have no idea where to get it. I google visionary r14 and use the first link like many people have said but whenever i click download it says firefox can't find the page. Does anyone know of some other way to get visionary ?

Nickoro said:
I have been trying to get visionary r14 but i have no idea where to get it. I google visionary r14 and use the first link like many people have said but whenever i click download it says firefox can't find the page. Does anyone know of some other way to get visionary ?
Click to expand...
Click to collapse
There is a link in the post 4 above this one.

does anyone know if this method will work on a htc glacier thats flashed to a network other then t-mobile.
http://forum.xda-developers.com/showthread.php?t=858996
its my friends phone and he is on simple mobile. i have rooted quite a few phones and know what i am doing but wanted to make sure it wouldn't conflict with his network

mdrentz said:
does anyone know if this method will work on a htc glacier thats flashed to a network other then t-mobile.
http://forum.xda-developers.com/showthread.php?t=858996
its my friends phone and he is on simple mobile. i have rooted quite a few phones and know what i am doing but wanted to make sure it wouldn't conflict with his network
Click to expand...
Click to collapse
Any rooting method will work on any phone it was designed for.

Hi guys, I just follwed the method by the unlocker... but at the end when I go to better terminal I'm not getting the # sign... So I recon that it didn't work, right? What might the problem be?

My bad, wasn't writing SU... OPPSSS!!!

I think I screwed something. I just noticed that my CW version is 3.0.2.4 and everybody I see is talking about 3.0.0.5. Is this something bad? I'm having trouble flahing gapps and I got another strange problem, If I put a ringtone and reboot the phone it reverts to the original one, and if I copy something to the SD card it gets deleted. Strange? Please can anyone tell me if I screwed this and how can I resolve?

mindwarp1571 said:
I think I screwed something. I just noticed that my CW version is 3.0.2.4 and everybody I see is talking about 3.0.0.5. Is this something bad? I'm having trouble flahing gapps and I got another strange problem, If I put a ringtone and reboot the phone it reverts to the original one, and if I copy something to the SD card it gets deleted. Strange? Please can anyone tell me if I screwed this and how can I resolve?
Click to expand...
Click to collapse
3.0.0.5 is the older one. 3.0.2.4 is the newer one.
What error are you getting when you flashed the g/apps?
how the eff is stuff getting deleted from the SDcard. the recovery image doesn't natively delete anything from the SDcard.

neidlinger said:
3.0.0.5 is the older one. 3.0.2.4 is the newer one.
What error are you getting when you flashed the g/apps?
how the eff is stuff getting deleted from the SDcard. the recovery image doesn't natively delete anything from the SDcard.
Click to expand...
Click to collapse
I don't really know, this is a new 32 gig class 6 sandisk memory, the original 8gigs is out ot the phone. I left last night transfering from my pc 20 gigs of music and today after i disconnected it from the pc it was gone.
I'm testing the ringtones to determine what the heck is going on, more on that later....
Gapps... starts to install and...
finding update package...
opening update package...
e:cant open /sdcard/gapps-gb-20110307-signed.zip
(bad)
Installation aborted
This is the 4th time I download this... Maybe permissions?

mindwarp1571 said:
Gapps... starts to install and...
finding update package...
opening update package...
e:cant open /sdcard/gapps-gb-20110307-signed.zip
(bad)
Installation aborted
This is the 4th time I download this... Maybe permissions?
Click to expand...
Click to collapse
Their has to be something wrong with (a) the recovery image or (b) the g/apps.
Are you sure you are downloading the correct g/apps for our phone running CM7. They have their own g/apps....If you are 100% sure it's for our phone then i'd suggest .....
... is attempting to manually flash the recovery image to make sure you do not get a blip in the system. Personally, i do not trust flashing recovery images with Clockwork ROM manager. I've seen a-lot of errors come out of it. This might be one of them.

Have you tryed the 8gig sdcard to install the g-apps? the 32gig may be bad

I just removed the sd card and put it on my laptop and copied a folder with music... after taht turned on the phone and it is gone! strange!

Gonna test the 8gigs..
Put the 8 gigs, and it installed... Hmmm...
NOw, after it finishes the setup of the apps I will format the 32 and test it...

Every time I try to download the Visionary.apk from the above posts, it downloads, then tells me the file has a virus... what's going on? Are they false positives?

_Allan_ said:
Every time I try to download the Visionary.apk from the above posts, it downloads, then tells me the file has a virus... what's going on? Are they false positives?
Click to expand...
Click to collapse
Its false so don't worry about it and go with VISIONary+

[How to] ¤¤»Update to 1.8.3 and ROOT«¤¤ (Working for Some)

I don't know why people are having soooo much trouble with this so im just going to post this..
this is what I did to get the 1.8.3 update.
1) Go download the Motorola Software Updater from here.
2) Download the updater and then install it. Make sure that you have your Motorola Driver updated.
3) Run the updater, plug in your phone (Debugging has to be on). Wait till the updater recognizes your Atrix.
4) The updater will scan your device and see what firmware you have installed. Once it identifies that you have your Atrix connected and you are updated to 1.5.7 it will start to scan for updates (This can take a while, so let it do its thing).
5) Once it finds an update, it will wait till you click next.
6) After that it will download and install the update to your phone, once it is completed your phone will reboot. (Again, the updating/installing can take a while)
THATS IT!
Rooting time w/ GingerBreak.
Go here to view the full guide on how to do it. FOLLOW THE INSTRUCTIONS!!!!
If I can do it, anyone can.
Credit for Root
jug6ernaut
Ask if you need help!
Please don't troll or post unhelpful comments!
Apperently doesn't work for everyone, I guess its being rolled out slowly. So if it doesn't work when you try it, try it another time.
Proof that I have it working, below.

Hi there
About how long does it take to recognize the phone??
Sent from my MB860 using XDA App

It would be nice if you could update like this but they have pulled it off there site since its not goin OTA yet. So now were having to revert back to flashing 1.8.3 over 1.5.7 va RSD. then do the whole root and side load after that

mudd_cat23 said:
It would be nice if you could update like this but they have pulled it off there site since its not goin OTA yet. So now were having to revert back to flashing 1.8.3 over 1.5.7 va RSD. then do the whole root and side load after that
Click to expand...
Click to collapse
When I did it. Sideload was still there. I just used GingerBreak to re-root. It was really fast and easy to do.

morpheoussc400 said:
Hi there
About how long does it take to recognize the phone??
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
A while. I guess it depends. I'm not sure if Motorola pulled the update from their servers like AT&T did.

Well I guess I need to clarify, how long does it take for the software update tool recognize the phone?
Sent from my MB860 using XDA App

To my understanding it took alot of peoples phones a while. From what i heard you can Flash 1.5.7 then flash 1.8.3 on top of that and root and enable side loading before the phone tools would start the update

morpheoussc400 said:
Well I guess I need to clarify, how long does it take for the software update tool recognize the phone?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
There should be a %. But it doesn't say how long and I didn't keep track. I just started it and left. Came back and it said it found an update then i just installed it.

Proof. Just want to show you that I actually have it working.
-Sideload (the only way I could get Screen Grabber on my phone)
-Rooted (required for Screen Grabber to work)
-1.8.3 (shown in picture)

I Flash a 1.8.3 SBF file.
But can't display a MP4 file which can play on Ver 1.5.7.
Can you play it with Gallery (with 1.8.3 default video player.)??

People have told you several times now that this method no longer works, I tried it exactly as you said several times over the past few days and just for good measure I tried again right before I posted this.
I understand that it worked for you a couple days ago but things changed and I assure you it does NOT work anymore.

Looks like the OTA availability is widening. I've been manually checking for updates daily for the last week or so. This morning it found the update and installed without issue. Northern VA area.

i just used the 1.8.3 sbf with RSD lite 5.31

No update on moto for me and no OTA

finally got it working, thanks!

I got the update notice as soon as I registered the product (which I hadn't done until today after owning since April 20th). Make sure that you've registered your phone on motorola.com

I just got the update right now over WIFI > System Update. Looks like its downloading now!!!

dont forget to backup your internal sd card since gingerbreak will format it.

Mine just popped

JonEleven said:
People have told you several times now that this method no longer works, I tried it exactly as you said several times over the past few days and just for good measure I tried again right before I posted this.
I understand that it worked for you a couple days ago but things changed and I assure you it does NOT work anymore.
Click to expand...
Click to collapse
Ya, that was my experience too. I did everything to the letter, and no update. What I think happened is moto/att is pushing out the update in batches, and you (chubby) happened to be one of the lucky first in the roll out, and that's why it worked for you.
I could be wrong, but that would definitely explain why everyone but you was having so much trubbs.
BTW, I just checked again a few minutes ago and it finally found the update.

Installed Original CWM instead of Unlocked CWM

OK so back on the Atrix. Have to say that I missed it.
Anyway in pretty short order I had unlocked the bootloader and was soon on my way to Gingerbread goodness.
Trouble is that I loaded the original CWM instead of the one for a unlocked bootloader.
I have spent the afternoon going through system/etc deleting files , reloaded through motofast boot any number of times and I still ended up with version 4.0.0.2.
Ok thought I go back to the start.
SBF'd back to Froyo and went through everything again and reloaded a freshly downloaded unlocked CWM and....
Still only have version 4.0.02.
Any clues how to get out of this ?!?!?!
Pretty please.

Andy_Thatcher said:
OK so back on the Atrix. Have to say that I missed it.
Anyway in pretty short order I had unlocked the bootloader and was soon on my way to Gingerbread goodness.
Trouble is that I loaded the original CWM instead of the one for a unlocked bootloader.
I have spent the afternoon going through system/etc deleting files , reloaded through motofast boot any number of times and I still ended up with version 4.0.0.2.
Ok thought I go back to the start.
SBF'd back to Froyo and went through everything again and reloaded a freshly downloaded unlocked CWM and....
Still only have version 4.0.02.
Any clues how to get out of this ?!?!?!
Pretty please.
Click to expand...
Click to collapse
Hmm I never paid attention to the tenfar cwm version numbers... but to know if you're on the cwm for the unlocked bootloader is if you can get into it WITHOUT being plugged in. The old locked version can only be accessed if plugged in.

You are right the older version required you to plug into a charger the new one doesn't.
My trouble is that the version I am using doesn't seem able to see zip files on a phone with a unlocked bootloader.
Hence my trying to figure this out.

Andy_Thatcher said:
You are right the older version required you to plug into a charger the new one doesn't.
My trouble is that the version I am using doesn't seem able to see zip files on a phone with a unlocked bootloader.
Hence my trying to figure this out.
Click to expand...
Click to collapse
Are you using the one from the market? If so, it doesn't see external SD card yet.

Andy_Thatcher said:
You are right the older version required you to plug into a charger the new one doesn't.
My trouble is that the version I am using doesn't seem able to see zip files on a phone with a unlocked bootloader.
Hence my trying to figure this out.
Click to expand...
Click to collapse
if you're trying to read off the internal sd card then that's why. only the newest cwm from tentar can read off the internal sd card

Andy_Thatcher said:
OK so back on the Atrix. Have to say that I missed it.
Anyway in pretty short order I had unlocked the bootloader and was soon on my way to Gingerbread goodness.
Trouble is that I loaded the original CWM instead of the one for a unlocked bootloader.
I have spent the afternoon going through system/etc deleting files , reloaded through motofast boot any number of times and I still ended up with version 4.0.0.2.
Ok thought I go back to the start.
SBF'd back to Froyo and went through everything again and reloaded a freshly downloaded unlocked CWM and....
Still only have version 4.0.02.
Any clues how to get out of this ?!?!?!
Pretty please.
Click to expand...
Click to collapse
I have the unlocked version of the tenfar cmw, and its the same version as yours. 4.0.0.2
So it looks like you have the correct one.
Did you install it by using the fastboot flash recovery command?

Yes, getting adept with moto-fastboot.
I have spent most of the day working through this and seem to be getting no-where fast.
If you look at the screen shots of the updated CWM it shows as being version 4.3.3, so if you can see the internal SD with 4.0.0.2 wonder why I can't.
Hold on that isn't quite right. I can see the internal SD just not the ROM zips. I can load radios etc just not ROM.

Andy_Thatcher said:
Yes, getting adept with moto-fastboot.
I have spent most of the day working through this and seem to be getting no-where fast.
If you look at the screen shots of the updated CWM it shows as being version 4.3.3, so if you can see the internal SD with 4.0.0.2 wonder why I can't.
Hold on that isn't quite right. I can see the internal SD just not the ROM zips. I can load radios etc just not ROM.
Click to expand...
Click to collapse
If you are indeed Bootloader Unlock, just download the attached file and run the "ROOT_CWM" bat
I hope it help

Good sir you are the man !
Ran the .bat file and then went into Recovery and low and behold there was the choice of Internal and External SD cards.
Fantastic bit of work, so very much appreciated.

your welcome!