Related
it works for E15a? or just for E15i? thanks for your answer....
E15a its same thing as E15i ..
Sent from my Xperia X8 using Tapatalk
Another Q
does it work with GingerDX or any other custom rom or just stock Eclair?
It's working good only on GingerDX..on other roms it will have problems like bootloops...
I am an idiot
Just checked the original post and saw that doixanh said that he uses it with his GingerDX..so sorry for the spam but another question...do I have to unlock the bootloader or it will work only with the instructions from his post...thanks for the patience everybody and for the good work...once you go DX you never go back keep it up!
sapabg said:
Just checked the original post and saw that doixanh said that he uses it with his GingerDX..so sorry for the spam but another question...do I have to unlock the bootloader or it will work only with the instructions from his post...thanks for the patience everybody and for the good work...once you go DX you never go back keep it up!
Click to expand...
Click to collapse
check the original post again and you'll get your answer.
Requirements
Unlocked bootloader
Flashtool 2.9.1
Desire to void your warranty!
Lol kill me please...just can't wait to try it is why...excuse me once again
Sent from my X8 using XDA App
so I wan't to use the thread as well
has anyone tried it and what are your impressions ?
i can't believe the devs were so quick at building a kernel
i don't know how, but gingerdx is now blazing fast Waiting for repair wifi and recoveries
and what about the battery
any difference?
st3ch said:
and what about the battery
any difference?
Click to expand...
Click to collapse
For me is better.. 5% in 5 hours...
everything is fine only wifi is not working yet...
may try out the kernel but without wifi.. >><<
Everything is clear about the famous "swap". so in other words to use the swap feature of DX's kernel we need to install apps from market to activate
thank you for the clarification
doixanh said:
Did you try this simple thing? My search showed this as the first result.
Everything is clearly explained: what swap is, should we use it, apps to enable swap, even how to know swap is enabled or not.
Isn't that simple for newcomers?
Click to expand...
Click to collapse
gxaris said:
Everything is clear about the famous "swap". so in other words to use the swap feature of DX's kernel we need to install apps from market to activate
thank you for the clarification
Click to expand...
Click to collapse
Don't forget that u have to create ext.3 / 4 partition to make it work as well..but it may as well reduce the life of your sdcard
sandy_tea said:
Don't forget that u have to create ext.3 / 4 partition to make it work as well..but it may as well reduce the life of your sdcard
Click to expand...
Click to collapse
No need.
You can use a swap file too.
Besides, it's not really measurable if it's going to reduce your sdcard lifetime, and even if it does, who would want to have an sdcard for more than two years.
I am not the real developer of insertions. Simply wanted to show that it is possible. Very much it would be desirable to see the new MIUI version on our smartphone
For developers only
MIUI4.0.4 2.7.20 failed to start on the basis of [ROM] [Early pre-alpha] AOSP ICS 4.0.4_r2.1 for DS5.kibuuka
The new wersion MIUI 4 2.7.20 hir:http://filestore.com.ua/?d=B3B5A9749
Russian is added. Stability of a.kamer is improved doesn't work
The big request to all who can finish this insertion, make it efforts
Sorry for bad english, thanks to online translation
For an insertion it is used Google Nexus One rom :http://roms.miui.us/passion/MIUI.us_passion_v4_2.6.22_Eng_Deo_ZipA_Signed_buildbot.zip
The new version works almost everything:to look the 34 th post
USB Mass Storage for ICS (that doesn't have native UMS support (yet))version 1.2:http://forum.xda-developers.com/showthread.php?t=1389375
new
Following version of an insertion:http://uafile.com.ua/get/33295/
speed is increased,the new basis and the new MIUI version, Is rut
I will download and flash to let everyone how it runs. Thanks, Liwais.
Liwais said:
Following version of an insertion:http://uafile.com.ua/get/33295/
speed is increased,the new basis and the new MIUI version, Is rut
Click to expand...
Click to collapse
The first build hv no phone.apk, wifi not work and no data, how then this build ? Can you provide more changelog details ? It is good hv MIUI v.4 running on our device. Thank you
Sent from my PC36100 using Tapatalk 2
Still running 2.4.20 MIUI... was tempted to try ICS but now seems everyone is looking toward to Jelly bean. Only feature I care about in Jelly Bean was the voice actions.
Other than that I'll take MIUI any day.
nom051205 said:
The first build hv no phone.apk, wifi not work and no data, how then this build ? Can you provide more changelog details ? It is good hv MIUI v.4 running on our device. Thank you
Sent from my PC36100 using Tapatalk 2
Click to expand...
Click to collapse
In this version speed and graphics not to be strewed is better. Thanking new build from kibuuka
In this version too there is no phone, but the Wi-Fi works at both versions that the Wi-Fi would work it is necessary to include it in settings and to press to scan in the bottom of page, and I have to work with data, phone it is possible to establish from a market for example TouchPal Contacts.В to an assembly basis new буилд [ROM] [Early pre-alpha] of AOSP ICS 4.0.4_r2.1 for DS5. (dell_streak-ota-eng.den.070212) and new MIUI Google Nexus One MIUI.us_passion_v4_2.6.29_Eng_Deo_ZipA_Signed_buildbot version.This version already with рут the rights .Who can force to work apk and launcher apk phone a request to help!!
Excuse for my English and thanks to all
For shutdown of illumination of keys and brightness control of the screen to use the appendix:https://play.google.com/store/apps/details?id=mobi.pruss.superdim&hl=ru
streak4m3 said:
I will download and flash to let everyone how it runs. Thanks, Liwais.
Click to expand...
Click to collapse
Please. Write the opinion) I won't refuse any help in MIUI construction
The new version works almost everything
The new version works almost everything, phone, a native launcher, subjects, a market, and is a lot of another, we test and we write responses
download:http://uafile.com.ua/get/33693/
MIUI4.0.4 2.6.29 Dell Streak-Hot thing
http://narod.ru/disk/55304535001.9765abc6af956166f4cc913155ba2318/MIUI.us_DELL%20STREAK%205_v4_2.6.29.zip.html
Liwais said:
The new version works almost everything, phone, a native launcher, subjects, a market, and is a lot of another, we test and we write responses
download:http://uafile.com.ua/get/33693/
MIUI4.0.4 2.6.29 Dell Streak-Hot thing
Click to expand...
Click to collapse
How about mobile data and camera?
sinan33 said:
How about mobile data and camera?
Click to expand...
Click to collapse
the camera doesn't work, Wi-Fi works, Data works for me
ı can not download the file
When i click on download it begins to download a file called "download.bin"
sinan33 said:
ı can not download the file
When i click on download it begins to download a file called "download.bin"
Click to expand...
Click to collapse
put a tick slightly below the button to download
added the reference still
Thank you!
I am downloading now.
Looks good! Seems to have the same bugs as the other ICS ROM, but a great start nonetheless!
Liwais,
Good work, man. This latest ROM is definitely better than previous ones. Aside from the typical things that are not working, like camera, for example, the transitions and response is considerably better but obviously not ready for extensive daily use just yet. I will provide more detailed report later on. But just wanted to say "thank you" for your hard work.
Hello
Hello guys... i wanna know how to install this rom. via streakmod recovery ? or what ? pls tell me step by step procedure to make a flashing on this DS 5.
Yes, using StreakMod recovery.
1) Do a Nandroid backup.
2) Clear Dalvik, Cache and Factory Reset from StreakMod.
3) Factory reset from main recovery menu. This step isn't always necessary, but doesn't hurt.
4) Flash this zip. Also flash gapps and superuser.zip from the other ICS thread for Google Apps and root.
5) Reboot and enjoy ICS MIUI!
Sent from my Dell Streak using Tapatalk 2
Edrill said:
Yes, using StreakMod recovery.
1) Do a Nandroid backup.
2) Clear Dalvik, Cache and Factory Reset from StreakMod.
3) Factory reset from main recovery menu. This step isn't always necessary, but doesn't hurt.
4) Flash this zip. Also flash gapps and superuser.zip from the other ICS thread for Google Apps and root.
5) Reboot and enjoy ICS MIUI!
Sent from my Dell Streak using Tapatalk 2
Click to expand...
Click to collapse
Also don't forget to flash the correct version of radio and baseband if you are coming from Froyo..
???
ncik said:
Also don't forget to flash the correct version of radio and baseband if you are coming from Froyo..
Click to expand...
Click to collapse
where to download ???
Thanks Mate !
Edrill said:
Yes, using StreakMod recovery.
1) Do a Nandroid backup.
2) Clear Dalvik, Cache and Factory Reset from StreakMod.
3) Factory reset from main recovery menu. This step isn't always necessary, but doesn't hurt.
4) Flash this zip. Also flash gapps and superuser.zip from the other ICS thread for Google Apps and root.
5) Reboot and enjoy ICS MIUI!
Sent from my Dell Streak using Tapatalk 2
Click to expand...
Click to collapse
Thanks for ur reply.
I got a DS 5 from my bro yesterday and i want to flash ROMs on it.
But i still don't know after i've finished ROMs on Ds 5 , is it easy to downgrade or move back to the official ROMs?
Firstly i got this one in 2.2 and now i got updated to 2.3.3 from other xda thread. So Pls answer me whether i should try flashing these ROMs or not ? Any help appreciated..! :laugh:
Hi everyone,
I recently flashed cyanogenmod 7.2 onto my HTC Wildfire and it kept restarting for an odd reason, I restored back to SplashMOD and it still has the same problem. I've turned 3G off and it seems to be fine, its just when I turn 3G on
Any help?
Maybe you overclocked your phone at 768MHz.... it isn't very stable
Sent from my Wildfire using xda app-developers app
Yeah i had the same problem
Just flash the latest radio, that fixed the problem for me
Sent from my HTC Wildfire using Tapatalk 2
I haven't overclocked it, where and how do I update the radio?
See the complete wildfire index thread in the development section.
It's a sticky so you will find it at the top
It contains everything u need: ROMs list, all recovery versions, all radio versions, kernels and allot more
Sent from my HTC Wildfire using Tapatalk 2
lo2ay said:
See the complete wildfire index thread in the development section.
It's a sticky so you will find it at the top
It contains everything u need: ROMs list, all recovery versions, all radio versions, kernels and allot more
Sent from my HTC Wildfire using Tapatalk 2
Click to expand...
Click to collapse
It says my phone needs to be GSM (I'm guessing that means unlocked) which my phone isn't. What is a good radio to flash? and do i need to do it before i flash a rom?
GSM means that it's a standard phone that works in any country. ie: it's not CDMA, which mean that it doesn't need special frequencies from the service provider.
Sent from my HTC Wildfire using Tapatalk 2
undeniableturnip said:
It says my phone needs to be GSM (I'm guessing that means unlocked) which my phone isn't. What is a good radio to flash? and do i need to do it before i flash a rom?
Click to expand...
Click to collapse
like lo2ay already said GSM ("Global System for Mobile Communications") doesn''t mean "unlocked" and has nothing to do wih it.
But in case you didn't unlock your phone - and I'm not getting you totally wrong - this brings up a much more interesting question: if you don't have an unlocked Wildfire - how the hell have you been able to flash a ROM anyway? I'd guess one of the following might match your situation:
- you have a different phone (not a HTC Wildfire)
- you just thought you're going to flash a ROM but did something else instead
- your Wildfire is unlocked and you don't know it
Are you really serious about what you've done? What tutorial/how to did you use to flash Cyanogen Mod?
And yes: if your phone is a Wildfire (buzz) and not unlocked/rooted you can't flash a new radio because you can't flash anything custom...
I think he was meaning sim unlocked?
Forum fishing.... Who's biting!
slymobi said:
I think he was meaning sim unlocked?
Click to expand...
Click to collapse
oh yes - I've been thinking about that for a few seconds - you're probably right.
Regarding my own little problem which I've also discussed a bit desperately here: may I ask you what you would try next with all your Wildfire experience? (I've never been really convinced that the V6 Supercharger or 3G Turbocharger scripts could be involved but after reading that a few people got that bootloop prob with 3G after messing around with them it looked so obvious).
I feared to investigate any further because I had the feeling it could cost a lot of time... so when I went on to solve the problem it turned out I was right with that: I've flashed the 7.2 stable today - with doing just a dalvik and system wipe without success and then a complete wipe - no success either.
I fear to revert back to a true stock rom (including s-off again) as it took me a lot of sweat to do that initially (that has been just in the middle of transformation from revolutionary to alpha rev with all the goldcard stuff etc.) - too make it short: what would you do?
Thx in advance for some input on this...
I would first check my mtd size settings! If you dont know what custom mtds are it means your not using them,if you are using them then you must remember to flash the bravo boot file straight after your rom flash before booting! If this is not your issue then i would do a clean flash of a rom. I.e wipe system, cache, dalvik cache, go into mount and storage and do all available wipes NOT sdcard, then flash the rom. If all fails then i would 1st try a reflash of a custom recovery and repeat previous clean rom flash. Now if it still didnt play ball i would scream at it, throw it at a wall then regret that step and move on to ruu.exe and start afresh lol.
On the v6 etc etc issue. Ive publicly said many times how much i hate this script and others like it! But this is only my opinion as i have had issues using them too in the early days. An app i use still to this day which gives you complete control over the effects of these scripts is autokiller memory optimizer. I will link to a thread i made some time ago to explain this app which can be found on the market.
This again can and most likely will be argued or debated as to its function but in my experience its a must have when used correct.
http://forum.xda-developers.com/showthread.php?p=20909644
Forum fishing.... Who's biting!
slymobi said:
I would first check my mtd size settings! If you dont know what custom mtds are it means your not using them,if you are using them then you must remember to flash the bravo boot file straight after your rom flash before booting! If this is not your issue then i would do a clean flash of a rom. I.e wipe system, cache, dalvik cache, go into mount and storage and do all available wipes NOT sdcard, then flash the rom. If all fails then i would 1st try a reflash of a custom recovery and repeat previous clean rom flash. Now if it still didnt play ball i would scream at it, throw it at a wall then regret that step and move on to ruu.exe and start afresh lol.
On the v6 etc etc issue. Ive publicly said many times how much i hate this script and others like it! But this is only my opinion as i have had issues using them too in the early days. An app i use still to this day which gives you complete control over the effects of these scripts is autokiller memory optimizer. I will link to a thread i made some time ago to explain this app which can be found on the market.
http://forum.xda-developers.com/showthread.php?p=20909644
Forum fishing.... Who's biting!
Click to expand...
Click to collapse
Sorry i only just noticed your link so my advice was for current op issue. However yes i believe these scripts are the cause im afraid. Still i would give you the same advice again as above or try a clean sense rom flash.
You can get safe ruu flashable zips too so as not to lose security or root so try these before going the exe route.
Hope you get a fix.
Regards slym.
Forum fishing.... Who's biting!
Thanks for the quick reply
slymobi said:
I would first check my mtd size settings! If you dont know what custom mtds are it means your not using them,if you are using them then you must remember to flash the bravo boot file straight after your rom flash before booting!
Click to expand...
Click to collapse
Yep I'm using custom mtds - that's exactly the reason I don't like to flash once in a week LOL. I'm aware of flashing the bravo boot directly before rebooting.
I.e wipe system, cache, dalvik cache
Click to expand...
Click to collapse
done
go into mount and storage and do all available wipes NOT sdcard
Click to expand...
Click to collapse
for that I'm sure I didn't do all (because I've done the factory reset anyways) but perhaps it helps to do it explicitly...? shouldn't hurt
If all fails then i would 1st try a reflash of a custom recovery
Click to expand...
Click to collapse
ummh, never done that before - can you point me to a tut or how to?
Now if it still didnt play ball i would scream at it, throw it at a wall then regret that step and move on to ruu.exe and start afresh lol
Click to expand...
Click to collapse
oh, so I'd say you're relaxed like Buddha as this came to mind much earlier
On the v6 etc etc issue. Ive publicly said many times how much i hate this script and others like it! But this is only my opinion as i have had issues using them too in the early days
Click to expand...
Click to collapse
yes I know - I've read a few of them I've been satisfied with the script but I'm also quite sure that it depends on too many things if it works good on the phone.
An app i use still to this day which gives you complete control over the effects of these scripts is autokiller memory optimizer. I will link to a thread i made some time ago to explain this app which can be found on the market.
http://forum.xda-developers.com/showthread.php?p=20909644
Click to expand...
Click to collapse
nice, thx, I'll have a look when that sweet old crappy thing will run again LOL
Thx again for quick response -> off to the laboratories now
Nice quote edits, you have way too much time on your hands lol.
For recovery flashing head to development sticky and 3xenos complete wildfire thread has it all mate. I use the terminal emulator method as adb and fastboot dont play well with me.
Lol buddah.
Some users stating a radio flash may fix the bootlooping? Wont harm to try!! Just make sure its a wildfire radio
Forum fishing.... Who's biting!
slymobi said:
Nice quote edits, you have way too much time on your hands lol
Click to expand...
Click to collapse
nah, easy when I'm on my PC - don't do that in Tapatalk though LOL (swype or not)
For recovery flashing head to development sticky and 3xenos complete wildfire thread has it all mate. I use the terminal emulator method as adb and fastboot dont play well with me.
Click to expand...
Click to collapse
thx - and for adb - it's the opposite here: I don't like ADBin' LOL
Some users stating a radio flash may fix the bootlooping? Wont harm to try!! Just make sure its a wildfire radio
Click to expand...
Click to collapse
I know but I've already tried that twice
And no good news: either wiping everything and doing with or without custom mtd didn't do. Immediately when the network icon shows up (on Google accounts login) reboot... - but wait... one more question: what about formatting boot? should i do this, too?
However, I'll try a sense ROM now and the "safe" RUU afterwards - cross fingers...
eventcom said:
nah, easy when I'm on my PC - don't do that in Tapatalk though LOL (swype or not)
thx - and for adb - it's the opposite here: I don't like ADBin' LOL
I know but I've already tried that twice
And no good news: either wiping everything and doing with or without custom mtd didn't do. Immediately when the network icon shows up (on Google accounts login) reboot... - but wait... one more question: what about formatting boot? should i do this, too?
However, I'll try a sense ROM now and the "safe" RUU afterwards - cross fingers...
Click to expand...
Click to collapse
Format boot..... Yeah why not, i always have.
Really strange this though as you have virtually wiped the phone clean. I thinks you gonna have to ruu it
Forum fishing.... Who's biting!
slymobi said:
Format boot..... Yeah why not, i always have
Click to expand...
Click to collapse
done also - without any effect
Really strange this though as you have virtually wiped the phone clean. I thinks you gonna have to ruu it
Click to expand...
Click to collapse
yup. I've tried to install Rempuzzle - but that hangs around 30 mins - so I will try the custom recovery first...
eventcom said:
done also - without any effect
yup. I've tried to install Rempuzzle - but that hangs around 30 mins - so I will try the custom recovery first...
Click to expand...
Click to collapse
Its sounds like you got things covered and know what your doing but just in case? You do have sdext partition for flashing rempuzzle yes?
Forum fishing.... Who's biting!
slymobi said:
Its sounds like you got things covered and know what your doing but just in case? You do have sdext partition for flashing rempuzzle yes?
Click to expand...
Click to collapse
LOL yes but thx for the reminder anyway
Now it's getting really weird... I've just put in a different SIM (out of the family) - different carrier. (the idea came to my mind somehow). Looks like the phone doesn't reboot with that.
If that's true and not by accident - what does that mean now? Usually I'd think about the radio - but I've completely wiped the phone (including a sense install in between) - could this be a hardware problem?
I guess I'll do the RUU thingy anyway. So I'll start to gather information on that.
If anyone has a good suggestion to do that as easy and quick as possible - I'd appreciate any suggestions.
--- EDIT ---
If someone has a suggestion for a small Sense ROM (yeah I know) I'd prefer to do that first...
Hello frnds,
I have my defy + MB526 for more than a year now, n i want to root and than install jelly bean in it.
My system version = 45.0.2310.MB526.Asiaretail.en.03
Baseband EPU93_U_00.60.03
Android Version = 2.3.6
Build Number = 4.5.1-134_DFP-231.
can any one help me with it.
Thank you in advance.
jountha said:
Hello frnds,
I have my defy + MB526 for more than a year now, n i want to root and than install jelly bean in it.
My system version = 45.0.2310.MB526.Asiaretail.en.03
Baseband EPU93_U_00.60.03
Android Version = 2.3.6
Build Number = 4.5.1-134_DFP-231.
can any one help me with it.
Thank you in advance.
Click to expand...
Click to collapse
First thing: You need to root your phone! Follow the instructions in my signature (under 'Rooted' - files found in 'these files')
Once you have successfully rooted your phone, you need to install 2ndInit <link here> (v2.3)
Now you can flash CM10!
i hve rooted.
z3ro-grav1ty said:
First thing: You need to root your phone! Follow the instructions in my signature (under 'Rooted' - files found in 'these files')
Once you have successfully rooted your phone, you need to install 2ndInit <link here> (v2.3)
Now you can flash CM10!
Click to expand...
Click to collapse
I have rooted my phone and i have installed 2ndinit in the phone.
can you guide me what to do next?
Hi,
maybe i can help you.
1.Download here the last quarz rom
http://forum.xda-developers.com/showthread.php?t=1768702
(Its beta! Its mean not perfect, but ran smotth.)
Put this on your sd.
2.Then you download gapps
minimal is enough, because your systemspace is not big.
Here a new link
http://www.uncledan.it/android-files/DefyGapps/Defy-Gapps-CM10.1-20121201-minimal.zip
And dont forget to put it on your sd.
Accu is full?
3.Restart your phone and by the blue led you push down.
4.Go in the custom or stable recovery, not stock.
5.Wipe data/factory reset.Before make a backup, when you want.
6.Install zip from sd.
Choose the rom, after this choose the gapps.
7.Restart
The first time need time. When is look like problem
pull out and in the battery.And make the handy on and wait.
PS:Read, read and read next time.
In the many threats they wrote how to install specific mods.
German is so much easier for me.
So i hope its help.
And i dont know why the people forget thanks after they take an answer.
Happy modding
I like acid sound mod 5 not 7 to improve the sound quality.
And jellyx make nice kernels for the last cm10s.
Thank you Joke19!
Could you please explain what is minimal gapps? Do I lose some functionality if I install minimal gapps instead of "full" gapps?
Danke!
fede_arg said:
Thank you Joke19!
Could you please explain what is minimal gapps? Do I lose some functionality if I install minimal gapps instead of "full" gapps?
Danke!
Click to expand...
Click to collapse
Gapps = Google Applications
So no, you won't lose functionality, and plus you can download any apps you want via the Play Store.
Thanks bro
joke19 said:
Hi,
maybe i can help you.
1.Download here the last quarz rom
http://forum.xda-developers.com/showthread.php?t=1768702
(Its beta! Its mean not perfect, but ran smotth.)
Put this on your sd.
2.Then you download gapps
minimal is enough, because your systemspace is not big.
Here a new link
http://www.uncledan.it/android-files/DefyGapps/Defy-Gapps-CM10.1-20121201-minimal.zip
And dont forget to put it on your sd.
Accu is full?
3.Restart your phone and by the blue led you push down.
4.Go in the custom or stable recovery, not stock.
5.Wipe data/factory reset.Before make a backup, when you want.
6.Install zip from sd.
Choose the rom, after this choose the gapps.
7.Restart
The first time need time. When is look like problem
pull out and in the battery.And make the handy on and wait.
PS:Read, read and read next time.
In the many threats they wrote how to install specific mods.
German is so much easier for me.
So i hope its help.
And i dont know why the people forget thanks after they take an answer.
Happy modding
I like acid sound mod 5 not 7 to improve the sound quality.
And jellyx make nice kernels for the last cm10s.
Click to expand...
Click to collapse
Thanks a lot for the procedure.
But i am confused with so many links on the page. Can you guide me out. Its really annoying fr which one to download. Also if i install will my internal memory decrease to great extent. Originally we r having 1.2GB.
jountha said:
Thanks a lot for the procedure.
But i am confused with so many links on the page. Can you guide me out. Its really annoying fr which one to download. Also if i install will my internal memory decrease to great extent. Originally we r having 1.2GB.
Click to expand...
Click to collapse
CM10-20130307-NIGHTL download this one which is stable .... later u can upgrade to the new builds :good:
and your internal memory wont decrease to that great extent...
happy flashing... all d best :angel:
thanks a lot dude
sunnysays said:
CM10-20130307-NIGHTL download this one which is stable .... later u can upgrade to the new builds :good:
and your internal memory wont decrease to that great extent...
happy flashing... all d best :angel:
Click to expand...
Click to collapse
thanks a lot man....i will surely try it out. But there is one more version available...20130404...does it have problem??
Thanks again
jountha said:
thanks a lot man....i will surely try it out. But there is one more version available...20130404...does it have problem??
Thanks again
Click to expand...
Click to collapse
I've been using sevenrock's adjusted Quarx build. However, if you read past the post you will find YAFU's post offers his take on it. They might be outdated as I haven't seen many positive comments on the recent builds. Hopefully someone can give you a more updated opinion.
Edit: As Sunny mentioned 0307 is the most recent stable one he knows. If you want to have fun then go play with the most recent just remember the newer does not always equate to better.
jountha said:
thanks a lot man....i will surely try it out. But there is one more version available...20130404...does it have problem??
Thanks again
Click to expand...
Click to collapse
Its experimental, use 18/03 or the one previously suggested
guide me on taking backup of current ROM
sunnysays said:
CM10-20130307-NIGHTL download this one which is stable .... later u can upgrade to the new builds :good:
and your internal memory wont decrease to that great extent...
happy flashing... all d best :angel:
Click to expand...
Click to collapse
I am little confused with my backup part.....i want to backup my current rom. how can i do it? can it be done with 2ndinit? if yes can you guide it out.
Go to the custom recovery option via bootmenu, navigate using volume keys and the power button to select backup and restore and then backup all
On a side note, cm10.1 is working quite well for me
Sent from my MB526 using xda premium
thanks bro
thekguy said:
Go to the custom recovery option via bootmenu, navigate using volume keys and the power button to select backup and restore and then backup all
On a side note, cm10.1 is working quite well for me
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
thanks fr the note
jountha said:
thanks a lot man....i will surely try it out. But there is one more version available...20130404...does it have problem??
Thanks again
Click to expand...
Click to collapse
Yup I know ... first try this build and later upgrade to it.... I have WiFi problem with 20130404 build ... you give a try ...
Sent from my MB525 using xda premium
running good
sunnysays said:
Yup I know ... first try this build and later upgrade to it.... I have WiFi problem with 20130404 build ... you give a try ...
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
I have installed it and it is running great......it has been running fr 25 hrs now in one go and didnt found any prob yet.
Sorry bro i m not a heavy user for Wifi so cant give decision on that.
Prob....cant sync mail contacts with normal contacts.
Phone camera is not proper. It still has some glitches.
made few calls....the receiver complains abt my voice reaching to them
The worst is the 2ndit recovery got changed. still wondering how can i recover that
Still no big prob.....Over all it is good one.
Thanks fr the suggestion
sunnysays said:
Yup I know ... first try this build and later upgrade to it.... I have WiFi problem with 20130404 build ... you give a try ...
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
i am running on CM10.1 20130404quarx ( the one with the stable kernel ) and wifi runs fine. i´m also on blechdoses 03/04 kernel, maybe it makes any difference, i don´t know. the problem is that actually the wifi prevents the phone from sleep. i resolved this problem with the battery saver app. but all at all the rom runs really fine
joke19 said:
Hi,
maybe i can help you.
1.Download here the last quarz rom
http://forum.xda-developers.com/showthread.php?t=1768702
(Its beta! Its mean not perfect, but ran smotth.)
Put this on your sd.
2.Then you download gapps
minimal is enough, because your systemspace is not big.
Here a new link
http://www.uncledan.it/android-files/DefyGapps/Defy-Gapps-CM10.1-20121201-minimal.zip
And dont forget to put it on your sd.
Accu is full?
3.Restart your phone and by the blue led you push down.
4.Go in the custom or stable recovery, not stock.
5.Wipe data/factory reset.Before make a backup, when you want.
6.Install zip from sd.
Choose the rom, after this choose the gapps.
7.Restart
The first time need time. When is look like problem
pull out and in the battery.And make the handy on and wait.
PS:Read, read and read next time.
In the many threats they wrote how to install specific mods.
German is so much easier for me.
So i hope its help.
And i dont know why the people forget thanks after they take an answer.
Happy modding
I like acid sound mod 5 not 7 to improve the sound quality.
And jellyx make nice kernels for the last cm10s.
Click to expand...
Click to collapse
Thanks a very lot! Suddenly my MB526 understands German It was a Chinese before! And now it has gapps.
I used CM10-20130318-NIGHTLY-mb526.zip and gapps-jb-20120726-minimal.zip, in case anyones wants to know.
Even more great is the fact, that it has JB 4.1.2 now!!! It was GB 2.3.4 (or something, sorry) before!
Just cool
There is a new built:
2013.10.30
Sent from my MB526 using XDA Premium 4 mobile app
Hi all!
I would be very happy if you all could share your ideas and knowledge with me regarding
List of things to do after buying a new Android Tablet
I am expecting my GT-N8000 next week and I want to start on the right footing with my new device.
It could be a list of do this and do that....step by step in order of precedence.
ex:
1. Disable UAC on Windows
2. Install Samsung Kies software on PC
3. Backup current/original Bootloader and save it on your PC for fallback purposes
4. Backup current/original ROM and save it on your PC for fallback purposes
5. Copy CWM or whatever...on your SD Card.
6. Boot up by pressing this and that button....
7. and the list goes on and on....(with all of your help!)
Click to expand...
Click to collapse
I've gone through the forum but I am so confused (being new to anything android )
I hope this will be a starting point for all newbies who are buying their android phone/tablet for the first time.
freelancer81 said:
Hi all!
I would be very happy if you all could share your ideas and knowledge with me regarding
List of things to do after buying a new Android Tablet
I am expecting my GT-N8000 next week and I want to start on the right footing with my new device.
It could be a list of do this and do that....step by step in order of precedence.
ex:
I've gone through the forum but I am so confused (being new to anything android )
I hope this will be a starting point for all newbies who are buying their android phone/tablet for the first time.
Click to expand...
Click to collapse
ROOT, Then ROOT, THEN ROOT, and lastly ROOT...
copc said:
ROOT, Then ROOT, THEN ROOT, and lastly ROOT...
Click to expand...
Click to collapse
Root - THEN EFS BACKUP
EFS Backup to Tar.gz and also to IMG - you really don't want to lose your IMEI
Only after that - do anything else
Bulbous said:
Root - THEN EFS BACKUP
EFS Backup to Tar.gz and also to IMG - you really don't want to lose your IMEI
Only after that - do anything else
Click to expand...
Click to collapse
thank you for the heads up
so, can you specify which tool i should use for backing up the EFS?
freelancer81 said:
thank you for the heads up
so, can you specify which tool i should use for backing up the EFS?
Click to expand...
Click to collapse
I just use a terminal emulator to get a command line interface (CLI) then do it manually
http://forum.xda-developers.com/showthread.php?t=859914
Root, install/setup firewall and adaway to block ads, setup tasker for automated things, install drawing apps, flash mod to get chrome into desktop mode only, and then i install all my other needed apps.
Sent from my SGH-T889 using xda app-developers app
my list of things to do after going through a galaxy tab 10.1 tab and a galaxy note tab 10.1 searching for a productivity tablet...give both to the kids and buy a Microsoft Surface Pro 128 GB....as an admin for a large company, I can do everything off it without having to make other less useful tools work well enough...
Get a case. A black one to be specific haha I got a white one to go with my white note, not the best idea... Got dirty fast. Also, if you are going to flash a rom, make it a stock based rom at first. Same UI and experience, but much faster.
Sent from my GT-N8013 using Tapatalk 4 Beta
inferno 414 said:
Get a case. A black one to be specific haha I got a white one to go with my white note, not the best idea... Got dirty fast. Also, if you are going to flash a rom, make it a stock based rom at first. Same UI and experience, but much faster.
Sent from my GT-N8013 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Hi, thanks for the suggestion.
yeah...I've already ordered a black rotating leather case, a scratch guard and a handsfree set.
I plan to flash the amazing Revolution HD 9.0!
I've never done anything like this and am hesitant a bit though.
thanks again!!
freelancer81 said:
Hi, thanks for the suggestion.
yeah...I've already ordered a black rotating leather case, a scratch guard and a handsfree set.
I plan to flash the amazing Revolution HD 9.0!
I've never done anything like this and am hesitant a bit though.
thanks again!!
Click to expand...
Click to collapse
I'm actually running Revolution! Fantastic rom. I didn't have any trouble flashing it, but I'm sure some people have. Just make sure to do a backup before flashing
inferno 414 said:
I'm actually running Revolution! Fantastic rom. I didn't have any trouble flashing it, but I'm sure some people have. Just make sure to do a backup before flashing
Click to expand...
Click to collapse
i plan to do a nandroid backup + efs backup.
i've downloaded the stock rom too.
i want to know whether 3G cellular will function or not coz some members are posting problem with not being able to use cellular anymore.
what about you...any problem?
freelancer81 said:
i plan to do a nandroid backup + efs backup.
i've downloaded the stock rom too.
i want to know whether 3G cellular will function or not coz some members are posting problem with not being able to use cellular anymore.
what about you...any problem?
Click to expand...
Click to collapse
Sorry, couldn't help you there I'm running the WiFi version, so naturally, it doesn't work for me haha Sorry again
inferno 414 said:
Sorry, couldn't help you there I'm running the WiFi version, so naturally, it doesn't work for me haha Sorry again
Click to expand...
Click to collapse
Thanks anyway.
I need to really confirm this before I flash it.
Oh...I am such a big noob.
Can you pls look around the Revolution HD 9.0 thread and and confirm if you got time? My net is so slow and I am on a win mobile phone...hard to go through 200 pages!
Greatly appreciate you for your concern.
freelancer81 said:
Thanks anyway.
I need to really confirm this before I flash it.
Oh...I am such a big noob.
Can you pls look around the Revolution HD 9.0 thread and and confirm if you got time? My net is so slow and I am on a win mobile phone...hard to go through 200 pages!
Greatly appreciate you for your concern.
Click to expand...
Click to collapse
Yeah, Just a sec
EDIT: I think it's working. I didn't find anyone that was having a problem anymore. The rom is based on the 3G version firmware, so I doubt you would have trouble.
inferno 414 said:
Yeah, Just a sec
EDIT: I think it's working. I didn't find anyone that was having a problem anymore. The rom is based on the 3G version firmware, so I doubt you would have trouble.
Click to expand...
Click to collapse
thanks again!!!
now there's no stopping me in flashing the note to awesomeness!!!
freelancer81 said:
thanks again!!!
now there's no stopping me in flashing the note to awesomeness!!!
Click to expand...
Click to collapse
Good luck!
inferno 414 said:
Good luck!
Click to expand...
Click to collapse
I have rooted it finally using the Samsung Galaxy Note 10.1 ToolKit (I chose TWRP custom recovery as it is touch/button based)
Then I did a full backup of the device using Nandroid TWRP
Then, just to be safe, I also did an EFS backup using EFS Professional.
I am just playing around and installing apps and games before I flash the Revolution HD 9.0 rom.
Thanks for the help!