Database Users

[Q] Advice for SBF restore.

Hey guys, I have done a ton of reading and researching about modding android phones since recently migrating from iPhones. I got a Droid1 and did some basic root/rom/overclock etc.
I just got a DX a few days ago and right away decided to start with the modding. Anyways, In a nutshell I attempted to go about the ROMing process in a similar manner to my Droid1 and ended up going to the Rubix1.6 ROM without ever backing up my stock OS.
I wanted to be able to jump back and forth to a blurless/blurred ROM to get a good feel for what I want outta it but am not sure how I should go about getting the stock OS stuff back on. I've read up about the SBF, but is that the only way to go?
Thanx for any help guys, greatly appreciated.
Sam G

Sadly, yes. Since you didn't back up before you started you will have to SBF to get a stock ROM. Be sure to make a nandroid of your modded ROM, SBF, root, backup, then flash back and forth.

Now as far as a Nandroid backup you mean just a backup through clockwork recovery correct?

CBX133 said:
Now as far as a Nandroid backup you mean just a backup through clockwork recovery correct?
Click to expand...
Click to collapse
yea. a nandroid backup is the backup you create in cw recovery

Ok So I did it and restored nicely after doing a wipe after.. Now I can't ACTIVATE my phone. Any ideas why it would mess with the activation. When I hit activate and then 1 it just says to enter the number.. SHIIT

CBX133 said:
Ok So I did it and restored nicely after doing a wipe after.. Now I can't ACTIVATE my phone. Any ideas why it would mess with the activation. When I hit activate and then 1 it just says to enter the number.. SHIIT
Click to expand...
Click to collapse
the activation system has been down for a few hours now. You can try *22899. Or do it online here http://www.verizonwireless.com/b2c/activate. Or just call the 1800 number and do it with a csr.

Ok, I'm hoping it is just a bad coincidence that the activation server is down. I'll pack it up and try again in the morning. If that's what it is then I am all set otherwise. Thanx!

CBX133 said:
Ok, I'm hoping it is just a bad coincidence that the activation server is down. I'll pack it up and try again in the morning. If that's what it is then I am all set otherwise. Thanx!
Click to expand...
Click to collapse
of course it's just a coincidence. flashing a rom or doing an sbf to your phone does not cause the verizon activation system to crash. lol. whenever you sbf your phone or do a factory reset, you have to do the *228 to reactivate. thats normal.

Just some info... when I wipe out my phone and boot it up (skipping) activation it works already. Found this out by wiping my phone, booting it up, and I got a text message immediately. Lol.

CBX133 said:
Hey guys, I have done a ton of reading and researching about modding android phones since recently migrating from iPhones. I got a Droid1 and did some basic root/rom/overclock etc.
I just got a DX a few days ago and right away decided to start with the modding. Anyways, In a nutshell I attempted to go about the ROMing process in a similar manner to my Droid1 and ended up going to the Rubix1.6 ROM without ever backing up my stock OS.
I wanted to be able to jump back and forth to a blurless/blurred ROM to get a good feel for what I want outta it but am not sure how I should go about getting the stock OS stuff back on. I've read up about the SBF, but is that the only way to go?
Thanx for any help guys, greatly appreciated.
Sam G
Click to expand...
Click to collapse
'
Just consider your SBF your 2.3.15 backup copy. It's not a pain. It's easy and it should be a tool in every modder's arsenal. IMO, people who don't know how to sbf, are destined to have to anyway, eventually, if they mod enough. The only thing is that when they have to, they won't know how and will kinda panic. I say be ready to sbf before you root, so you're ready when trouble comes.
Me? I love modifications and will sometimes go too far or make a mistake at 2 am, when I really should be sleeping instead and I wind up bricked. No problem. Just SBF and I'm on my way. If you need further info or how to's feel free to ask.
Steven

Steven58 said:
'
Just consider your SBF your 2.3.15 backup copy. It's not a pain. It's easy and it should be a tool in every modder's arsenal. IMO, people who don't know how to sbf, are destined to have to anyway, eventually, if they mod enough. The only thing is that when they have to, they won't know how and will kinda panic. I say be ready to sbf before you root, so you're ready when trouble comes.
Me? I love modifications and will sometimes go too far or make a mistake at 2 am, when I really should be sleeping instead and I wind up bricked. No problem. Just SBF and I'm on my way. If you need further info or how to's feel free to ask.
Steven
Click to expand...
Click to collapse
Hey just got my replacement x today already rooted and have fly x on it. The sbf back up category is my only weakness. When my phone goes belly up im kinda lost. Do you have or know of any threads walktbroughs on bow to.bring a bricked phone back to life. Im putts replacements for this year through asurion and will have to do this if im bricked again. I was stuck on the tranquility logo couldn't get out. Thanx.
Sent from my DROIDX using Tapatalk

illcat2000 said:
Hey just got my replacement x today already rooted and have fly x on it. The sbf back up category is my only weakness. When my phone goes belly up im kinda lost. Do you have or know of any threads walktbroughs on bow to.bring a bricked phone back to life. Im putts replacements for this year through asurion and will have to do this if im bricked again. I was stuck on the tranquility logo couldn't get out. Thanx.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
Here's what I used to guide me through the sbf...
Here is a link to the guide I used. It is for the 2.1 SBF though.
http://www.intomobile.com/2010/09/21/droid-x-stock-android/
Here are the instructions with my modifications for 2.2...
IMPORTANT!!! - the directions are for restoring 2.1 so you do not do some of the steps! They were the best I could find. I followed them except for things that did not apply.
instructions:
1. First off, choose the right version of Motorola USB drivers for your computer and install them (32bit) (64bit)
2. Download & install RSD Lite 4.7 (download)
I did not use 4.7 as it is not current. I used 4.9
You will need to patch this after installing. There is an .ini file included in the folder that needs to be placed in your install directory. /Program Files/Motorola/RSD Lite
I used 4.9 and did not have to patch any files- the above step was unnecessary.
3. Download the Droid X Android 2.1 SBF file, which you can find here
of course I used the 2.2 SBF file here...
http://rootzwiki.com/
4. Unzip the SBF file to your desktop
i did not unzip mine to the desktop- i put it where i stash my android files- it made no difference.
5. Run RSD Lite, and click the “…” button, then find the SBF file that you just unzipped to your desktop and select it.
Starting here i followed the directions to the "t". Went through all the steps. !!!!!MAKE SURE YOU START WITH 100% BATTERY!!!!!! It takes a long time and if your phone dies during the process it is a nightmare.
6. Plug your Droid X into your computer and power it down
Go into the Bootloader (with phone off, hold the CAMERA button and VOLUME DOWN, then hit the POWER button)
After holding for 2-3 seconds, release the buttons and RSD Lite should recognize your Droid X
7. Click the start button to flash Android 2.1 to your phone.
of course we are flashing 2.2
8. When the flashing is complete, unplug your phone
The Droid X will likely not boot up all the way, so pull the battery out
Put the battery back into the phone and reboot into Recovery mode ( Hold the HOME button and press POWER until you get an exclamation mark. Release the HOME button and press the SEARCH button)
Using the VOLUME UP/DOWN buttons, navigate to “wipe data/ factory reset” option on the screen, and press the CAMERA button halfway down to execute.
When complete, choose to reboot your phone
9. It takes a while. Hope this helps. And I hope it goes smoothly. It was nerve racking for me. After you have finished the process you will not be rooted. Use the market app "Z4root" or which ever method you prefer.
good luck.
Click to expand...
Click to collapse

thepolishguy said:
Here's what I used to guide me through the sbf...
Click to expand...
Click to collapse
i really appreaciate the guide and quick response im going to try to save these for future refrence.

just tried this method for the experience on the droid i bricked. worked like a charm was a bit easier too. phone rebooted on its own. i wiped just to make sure since i need to send it back to vz i already got my replacement. but this definetly gives me a little more confidence knowing i can bring it back from the dead if i have to. thanks again.

detailed sbf restoration instructions
illcat2000 said:
Hey just got my replacement x today already rooted and have fly x on it. The sbf back up category is my only weakness. When my phone goes belly up im kinda lost. Do you have or know of any threads walktbroughs on bow to.bring a bricked phone back to life. Im putts replacements for this year through asurion and will have to do this if im bricked again. I was stuck on the tranquility logo couldn't get out. Thanx.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
sure! from http://androidforums.com/droid-x-al...ing-custom-rom-theme-how-unbrick-droid-x.html
*my note: make sure you install moto dx drivers on your PC: http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD
C. UnBRICKING INSTRUCTIONS:
HELP ME. Ima noob! I BRICKED MY PHONE!
1. go to Home and DL the leaked full OTA FROYO 2.2 .SBF file.
2. Download and install RSDLite v4.8 (it should be on Home if not, go Google it.)
3. If your phone is stuck on the load screen, pull the battery, wait a minute, push the battery back in and restart with the phone’s Boot Loader Mode (do this by pressing the red camera button + volume down + power button  hold all of them in the order that I stated until your phone flashes briefly). Your phone should flash white and a Boot Loader menu will come up. Make sure there is at least 20 to 25 percent battery life remaining in order for the reformat of you phone to complete. If your phone dies in the middle of this process GOD HELP YOU.
4. Run the RSDLite File and connect your Droid X to your computer via USB.
5. Browse for the .SBF file you downloaded in step 1 and click “Start”, at which point the program should run and your phone will proceed to unbrick
6. EASY RIGHT?
7. Once unbricking you will have to go through reactivation of your phone. This is normal so just go through the steps you did when you first started.
8. GUESS WHAT? You made a backup of your previous customizations REMEMBER? If you don’t want to deal with the hassle of re-downloading your entire life onto your phone again follow the “ROOTING” instructions in Part A and redownload Bootstrap and reboot into recovery mode to RESTORE the backup you made by following steps 2-11 in Part B….except you won’t be going to “install from sdcard” you will going to “Backup and Restore” and “Restore from sdcard”.

HELP Please - Error running SBF in RSD Lite
First off, I'm a newbie, so please go easy on me if these are dumb questions. I get the following error while trying to run "VRZ_MB810_2.3.15_1FF_01.sbf" in RSD Lite 4.7 while in boot mode. I don't know what else to do. My phone won't work. Thank you for any advice you can give.
Failed flashing process. [Phone 0000]: Phone is not compatabile with multi-interlace interface super-file. (0x703B): Phone connected.

rossi28usa said:
First off, I'm a newbie, so please go easy on me if these are dumb questions. I get the following error while trying to run "VRZ_MB810_2.3.15_1FF_01.sbf" in RSD Lite 4.7 while in boot mode. I don't know what else to do. My phone won't work. Thank you for any advice you can give.
Failed flashing process. [Phone 0000]: Phone is not compatabile with multi-interlace interface super-file. (0x703B): Phone connected.
Click to expand...
Click to collapse
did you put the patched pst_flash.ini file in the rsdlite install directory?

I put that file in program files>motorola>rsd lite. I did it after installing the program if that matters. The zip file folder name was RSD Lite 4.7+Patch. Also, in RSD Lite in order for the program to recognize my droid x i had to select the "first come first serve device id mode" under the device id options in the config menu. Don't know if this matters, just trying to give as much info as possible. Thanks.

rossi28usa said:
I put that file in program files>motorola>rsd lite. I did it after installing the program if that matters. The zip file folder name was RSD Lite 4.7+Patch. Also, in RSD Lite in order for the program to recognize my droid x i had to select the "first come first serve device id mode" under the device id options in the config menu. Don't know if this matters, just trying to give as much info as possible. Thanks.
Click to expand...
Click to collapse
yea, you can only do it after installing the program. it has to be closed though when you do it and you have to overwrite existing file. if you did all that properly, then it may be a corrupted sbf. I would just install rsdlite 4.8 or 4.9 and retry. those dont require a patch.. if no workie, then redownload sbf.
rsd lite 4.8 is here http://www.multiupload.com/HL0ZAL9GK8

I can't remember the order I did it in so I'll re-install with the instructions you gave. Thank you! I'll report back.

help! Defy wont boot, white light at top, rsdlite doesnt recognise

Deleted by user

I suggest you to completely charge your phone for half a day and then try to power it on. It should at least get stuck in the M logo.
Sent from my MB525 using XDA App

Mine has done the same thing, i left it connected to rsd lite to flash, went to bed, and now its stuck at a black screen and won't boot up at all. Same white light when plugged in to the pc, but rsd doesn't recognize. please help.

Was your battery low when you tried flashing? It will not charge in bootloader mode so if you're battery is low you will have issues. If you boot with volume up pressed does it give you a message?
Try the Mcgyver battery fix found in this forum.
skateguitar00 said:
Mine has done the same thing, i left it connected to rsd lite to flash, went to bed, and now its stuck at a black screen and won't boot up at all. Same white light when plugged in to the pc, but rsd doesn't recognize. please help.
Click to expand...
Click to collapse

Deleted by user

I had that problem while trying the "Flash FroYo without losing downgradeability" solution: SBF Problem
After downloading, flashing every other available official ROM, and failing with each one, and seeing that no other SBF fro T-Mo exists anywhere, I bit the bullet and flashed the T-Mo signed FroYo ROM. And it worked!
So now I may have screwed myself over by flashing the leaked ROM but hey, it works well and is fast. Plus, it's FroYo so I now have A2SD and built-in Tethering...
gookia2000 said:
Hi all, I am a proud owner of a t-mobile defy (for about 2 months now!) and my hands got itchy today and went ahead to "debrand" it following the guide by Higgsy.
I was trying to flash a uk 2.21 rom onto my t-mobile defy (rooted with z4root).
Well, I managed to do all the steps of the guide. my phone was recognised by rsdlite, i selected the uk 2.21 sbf file, i clicked start, and it started flashing the different code groups. Finally, it said "finished" and "PASS". Here is when the problem started. The phone did not reboot into android. It was just a blank screen with a white light on the top (where the green led is to inform you about new messages.)
i panicked and disconnected the phone (the white light turns off after disconnecting), took out the battery, tried rebooting, tried rebooting into recovery (power + vol down), tried rebooting into bootloader (power + vol up). Nothing worked. it just stayed dead.
I then plugged it back into the computer. immediately the white light came back on and rsdlite recognised my phone. i tried flashing again - same result. I then tried flashing the 2.52 uk rom - same result.
even more panicky now, i unplugged everything and decided to take a nap and hopefully think of some ingenious solution to the problem. now, after a 3 hour rest, i tried plugging the phone back into the computer. the white light comes on, but now rsdlite doesnt even recognise the phone.
In essence, is my phone bricked? I cannot:
1) load into recovery to do a nandroid restore (yes, i have a nandroid backup copy)
2) load sbf files from rsdlite. every sbf file i tried doesnt seem to work. now its worse as rsdlite doesnt even recognise my phone.
i have even tried doing a nandroid restore via adb. but i get the error message that no phone was detected in the command prompt. perhaps its because the phone was not started in recovery mode.
The only explanation i can think of is that i have recently updated to the t-mobile 3.6.360 update and that might be the reason why so many people before me were able to flash their defy's roms successfully while i got stuck.
Can anyone please help? I LOVED my defy more than any other phone, and 2 months was too shortlived!
Click to expand...
Click to collapse
skateguitar00 said:
Mine has done the same thing, i left it connected to rsd lite to flash, went to bed, and now its stuck at a black screen and won't boot up at all. Same white light when plugged in to the pc, but rsd doesn't recognize. please help.
Click to expand...
Click to collapse

Deleted by user

Actually, all you have to do is press the power button while the LED is on and RSDLite is running. You will hear the USB detection sound and your phone will appear on the list. It won't appear as it normally would but it will be listed.
Then just choose the Froyo ROM and then click start to flash it. It'll take less than 10 minutes...
There's no other way that I know of to get it working. Even in the link that I posted, you can check and see that no one even bothered to give me an idea of what to do. I had to figure this out myself.
I figured it was the bootloader protection that was causing the problem so the logical choice was to flash the only T-Mo ROM available which happens to be the leaked Froyo.
It's been almost 24 hours and I've had no problems with FroYo so as far as I'm concerned, I'm good.
gookia2000 said:
Beach Head, thanks for your reply. you have provided me with a glimmer of hope!!! the leaked tmobile froyo sbf is one i have not tried. I will certainly try to flash my defy with that once i have gotten it recognised by rsdlite.
I believe my phone is currently not being recognised by rsdlite due to insufficient battery. (cant confirm this, as all i see when i plug in the usb is a white light on my phone. but ever since i started this entire nightmare, i think i have attempted flashing at least 5 different sbf files and considerable battery has been drained.) I will try the Mcgyver battery fix next.
skateguitar, THERE IS HOPE!!! i havent confirmed it yet but i think we all got stuck cos we were trying to flash from a "non-downgradeable" 3.6.360 firmware. and rsdlite does not recognise our phones due to low battery (your phone was left with a white light on after flashing for 1 whole night.) SO... i propose this course of action: 1) perform the Mcgyver battery fix and try to get our phones recognised by rsdlite first. 2) once recognised, flash with the leaked tmobile froyo sbf.
Does anyone have any better suggestions before i plunge head first to save my phone?
Click to expand...
Click to collapse

Yes all i wanted to say was that you might have lost your downgradability and thats why phone does not boot. Simple thing is to flash the original sbf like what beachhead suggested. It definitely should work.
Sent from my MB525 using XDA App

Guess what, it works!!!
Deleted by user

Glad I could help you out!
Enjoy Froyo!
gookia2000 said:
OHMYGOODNESS!!! I LOVE YOU GUYS!!!
My Defy has been flashed with the t-mobile froyo leaked rom and IT WORKS!!! I was so mentally set with the idea that my defy has been bricked and I just threw $400 down the drain... NOW I AM SO HAPPY!!!
Anyway, just for your information, here is what I did:
- I first tried to get my defy recognised by rsdlite. I tried Beach Head's suggestion of pressing the power button while the led is on to no effect. I reckon that the battery has just been drained too low. So, i went ahead with the McGuyver battery fix.
- Alas, with the wires protruding precariously from my phone, rsdlite finally recognised my phone. I went to load the leaked t-mobile froyo rom and went ahead flashing it.
- And, guess what, IT WORKS!!!
Thank you all so much, especially beach head, for your help in this forum! I would have gone to the mobile store to get another phone if not for you guys!!!
Click to expand...
Click to collapse

I have the same problem, and will probably end up trying to flash the leaked Tmobile Rom.
Can you point me to where you downloaded this file? I think I found the thread, but I want to be sure

Deleted by user

got it! Thanks!
Now to ultimately decide if I want to flash this, since it's non-downgradeable

To update, flashing this rom has fixed my phone. Yay! Thanks!
I wonder if it was the 3.66x update that Moto pushed out - this phone was brand new, bought in Dec 2010, no other hacking done on it...

Beach_Head said:
I had that problem while trying the "Flash FroYo without losing downgradeability" solution: SBF Problem
After downloading, flashing every other available official ROM, and failing with each one, and seeing that no other SBF fro T-Mo exists anywhere, I bit the bullet and flashed the T-Mo signed FroYo ROM. And it worked!
So now I may have screwed myself over by flashing the leaked ROM but hey, it works well and is fast. Plus, it's FroYo so I now have A2SD and built-in Tethering...
Click to expand...
Click to collapse
How did you get it to show up in rsd

I'm not working on my phone because i think i messed it up enough, so i took it to a store that fixes phones. The guy told me that he had my battery on a universal charger and he still cant get rsd lite to recognize it... What can i do

Another Happy Defy User
Just to confirm, I was seeing the same thing gookia2000 was seeing. Here was my resolution in case it helps anyone:
I was able to get mine working by flashing the US Stock Froyo build as explained in this thread: http://forum.xda-developers.com/showthread.php?t=938708&highlight=bricked&page=2
I found this thread to be super helpful as it helped me confirm my suspicion that the battery being low was the issue: http://forum.xda-developers.com/wik...#Recover_Nearly_Bricked_Phone_.28hopefully.29
Thankfully my wife has the same phone so I borrowed her battery, otherwise I would have been going McGyver style per Sorensiim (da' man) as seen here:
http://forum.xda-developers.com/showthread.php?t=892026
So happy this nightmare is over - running Froyo is a little bonus love!
Thanks to all @ XDA!!!
-Dave

Defy wont come on get a white light!
im having the same prob i did the the steps but its not working is there anything else i can do or is there a video of the proceeder

I have the same issue with a Telstra defy. I can get RSD to recognise something is connected but it isnt listed as MB525 like before but as "S Flash OMAP3630" I have flashed various SBF files but nothing is changing.

OH NO! Another messed up Droid X

A month go I installed the leaked Gingerbread. everything has been fine until I decided to get back to Froyo for the OTA. Rooted this morning through Gingerbreak. Still OK. Made a back up through Bootstrapper. Booted into recovery and installed .zip from sd card. Used Maderstock zip. it made it through almost the entire process then when it got to update Radio it aborted. I cleared all the cache and data and all...still nothing. Hit reboot and now it is stuck in bootloop at the droid logo. The font with the circles under the "r" Can not hold home and power to get into recovery. can not turn on phone at all. only get charge screen when plugged in (and yes I was 90-100% charged when attempting this) and red moto logo goes black when attempting recovery boot.
I assume I need to SBF through RSD Lite. Problem is- It wont recognize my device. (yes I have downloaded the Moto drivers.)
At this point I am totally stumped. Noob here, but with LOTS of research and reading over the last weeks.
Help?

check out how to sbf using a linux virtual machine. You can just boot it up within windows. As far as I know, you will not need the drivers for this to work.
Try this. Hopefully it helps.
http://www.droidxforums.com/forum/d...-solution-your-windows-rsd-lite-problems.html

After weeks of reading forums and posts, I have successfully SBFd my phone back to stock Froyo. I wish I could remember everyones names from every post I read, and thank them personally, but a BIG THANK YOU to the Android community and to anyone that has offered their time and service to helping out. THANK YOU ALL! My experience as little as it might be might now be valuable to others as well.

Let us know what you did fix your situation.
Sent from my DROIDX using XDA App

Fixing a bricked Droid X
beeper10 said:
Let us know what you did fix your situation.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Many thanks to all those that have spent countless hours helping users like myself find solutions to Droid X problems. At one point in this process I basically bricked (maybe soft briked is the term) my phone. I could do nothing but get a bootload screen. No moto logo, no droid eye, NOTHING.
Long story short, and to help anyone that needs it, here is my solution.
Download FULL SBF file from file share somewhere (VRZ_MB810_2.3.34_1FF_01.sbf)
Download RSD Lite 4.8
Download Moto Drivers
Power Off Droid X- Make sure it is fully charged when attempting any SBF Flashing.
Power on into Bootload mode. I held Power and Volume rocker simultaneously until a quick flash then Bootload appeared. (version 30.4)
Open RSD Lite as an administrator. (hold shift and right click. use "run as") In my case Windows 7 -64bit
Plug phone into computer via USB
Locate device in RSD. Click the little box that has "..." in it and select the SBF file you previously downloaded.
Start.
Let it work its entire process and Voila you will have stock Froyo back on your phone in no time.
I then went in under settings and received the OTA for Gingerbread. My phone works like a champ now.
The steps are clear as day in my head, and I will be able to troubleshoot many of you through the steps. The further from today it gets it might get foggier, so ask away if you are having problems.
It seems like everything had to be VERY specific to work just right.
Good luck and happy Bricking! :/

It happened to more people than you think. I DLed RSD 4.9, 4.8 didnt work for some reason. That was like a month ago, I'm on froyo now, rooted with Liberty. Now I have to SBF again to get the official GB...lol!

My story the same just different thread, (soft bricked) lol my phone, all i got was the bootloader, on win7 64bit as well, only thing different was ive my win7 tuned up to my preferences so i didnt have to ask or run as anything. The steps used in this thread were identical however and many many hours of reading done as well. Just putting this info up here to let you know that you can get your dead bootloading phone back so even though it feels like you have a bowl of something nasty in your stomach as you stare at your DX with nothing but a bootload screen on it and seemingly no other options, read thoroughly, pay attention, be specific and youll have your DX running like a champ in no time. THANK YOU Devs/Community

I need Help - Serious Acting up of Phone

I'm on my 3rd Atrix now, after two previous phones just stopped working.
Now I was having crashing problems no matter what rom I went to and other problems, like the power button not working in CWM and freezing all over.
So I had to sbf to 2.3.4 preroot/unlocked to be able to get back to a starting point. I did everything properly and now am in a boot loop, and I've done a battery pull. The farthest it has got is "welcome to blur" screen then starts to loop again.

live_free said:
I'm on my 3rd Atrix now, after two previous phones just stopped working.
Now I was having crashing problems no matter what rom I went to and other problems, like the power button not working in CWM and freezing all over.
So I had to sbf to 2.3.4 preroot/unlocked to be able to get back to a starting point. I did everything properly and now am in a boot loop, and I've done a battery pull. The farthest it has got is "welcome to blur" screen then starts to loop again.
Click to expand...
Click to collapse
what sbf did you flash? is it att bell etc? need some more info to help you out.

aideneisley3 said:
what sbf did you flash? is it att bell etc? need some more info to help you out.
Click to expand...
Click to collapse
ATT-2.3.4_Pudding_preroot.sbf
http://forum.xda-developers.com/showthread.php?t=1138204

live_free said:
ATT-2.3.4_Pudding_preroot.sbf
http://forum.xda-developers.com/showthread.php?t=1138204
Click to expand...
Click to collapse
STEPS:
1) Have the correct Motorola drivers installed for your PC (i.e. x32-bit or x64-bit).
2) Download RSD Lite (Links above) & install on your PC.
3) Choose a sbf file to download and flash from Motorola Atrix Firmware Super Thread: http://forum.xda-developers.com/showthread.php?t=1125944
If you are currently running firmware 4.5.91, I suggest that you only flash back to this firmware version. Flashing back to a eariler sbf/firmware version may have unintended consequences, the most serious of which is bricking your device.
*Note: U.S. AT&T users should only flash AT&T sbfs, internationl users should only flash their particular sbf versions.
4) Read the above sbf hints, trick, etc. to help prevent RSD Lite problems/errors.
5) Open RSD Lite and load the sbf file that you downloaded.
6) Put your device in RSD Protocol Mode by powering OFF, and upon powering back ON, hold both the power button and the volume UP button. Device should now say "Entering RSD Protocol Mode."
7) Connect your device to your computer via the usb cable, and select your device by clicking/highlighting it in RSD Lite.
8) Select START in RSD Lite and let the sbf flash process fully complete before disconnecting the device from the PC. There will be several reboots and the process make take 5 - 10 minutes to complete a FULL sbf flash.
9) If you have any errors or problems as a question, prefably in the Q&A section.
this is what i have done and worked for me! good luck
i copied this from the noob guide found here http://forum.xda-developers.com/showthread.php?t=1154600

Yeah I did that. I am flashing the complete stock 4.5.91 to see if that does anything.

live_free said:
Yeah I did that. I am flashing the complete stock 4.5.91 to see if that does anything.
Click to expand...
Click to collapse
yeah the one in the atrix firmware superthread at the top is the one i recommend it gets you back to stock fresh out of the box you might have to go through the unlock again even though your already unlocked and of course you will have to root again.
hope it works for you!

aideneisley3 said:
yeah the one in the atrix firmware superthread at the top is the one i recommend it gets you back to stock fresh out of the box you might have to go through the unlock again even though your already unlocked and of course you will have to root again.
hope it works for you!
Click to expand...
Click to collapse
I just did that, and no same problem. So it looks to be a hardware problem, not a software one. At least from my perspective.

live_free said:
I just did that, and no same problem. So it looks to be a hardware problem, not a software one. At least from my perspective.
Click to expand...
Click to collapse
did you flash this one? 1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf

aideneisley3 said:
did you flash this one? 1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf
Click to expand...
Click to collapse
Yes. Same exact problem.

live_free said:
Yes. Same exact problem.
Click to expand...
Click to collapse
oh ok well then i'd have to agree with you then maybe it is a hardware problem... sorry i wasn't much help.
it wouldn't hurt as a last ditch effort to use motorola's software update program that you can download from their site it will tell you that there is no update and ask if you want to use it to restore your phone basically it reflashes it...
haha thats all i got. maybe someone else could offer more help.
good luck! =]

live_free said:
I did everything properly and now am in a boot loop, and I've done a battery pull.
Click to expand...
Click to collapse
apparently not.

in his defense replacement phones are refurbished (cough... broken and maybe fixed to like new). motorola gave me a replacement with broken senor so the screen didn't turn off when i was in a call and that was out of the box and when they replaced that one the screen was messed up it had super bright spots all over the screen so it is possible that it is moto's fault.
not saying it is moto's fault but that it is possible lol

[Q] Defy near death or worse. Please help!

Hi guys, you are my last hope!
Bought my Defy early 2011 and regularily updated with custom ROMs, so you could say I know a thing about rooting, RSD Lite, fixed sbfs, ...
Or at least I though I knew, but I still managed to kill my phone I think.
Here's what happend:
I tried to install Epsylon3s nightly from may 8th (http://defy.wdscript.fr/defy-cm9/). Before that, I was on CM 7.1
After installing the zip and rebooting, I saw the bootlogo, then i was asked for my pin code. As soon as i entered it, again to the bootlogo, again the pin, and so on.
So i realized something was wrong.
Could not get into recovery, so I flashed
JORDN_U3_97.21.51.sbf
as this often helped me in the past.
I then tried this one:
http://forum.xda-developers.com/showthread.php?t=1498843
Also didn't start.
So back to
JORDN_U3_97.21.51.sbf
But here it might be, that I misclicked (I have quite some SBFs in that folder, cause I wanted to be prepared in case something went wrong), as after that, I never got my Defy to work again.
I was stuck at the Motorola M logo.
Coudln't get into recovery, so no zips for me anymore, only flashing of sfb.
That's basically when I entered panic mode. As I didn't know what I just flashed, I could only guess the problem. So I tried the Ginger2Froyo (http://forum.xda-developers.com/showthread.php?t=1486731) in case I went to BL6. Also tried http://forum.xda-developers.com/showthread.php?t=1552152
But in this process, my RSD Lite started to behave strange:
when flashing, it's building the image, uploads it, checks checksum. But once it says "rebooting" it immediately jumps to 100% and pass. Phone how ever stays black and white LED.
Of course I can still flash other SBFs, and I tried various (JRDNEM_U3_3.4.3-36-1.7. sbf for example). But I either get the instant PASS, which tells me something didn't work, or sometimes I get the neverending bootlogo and RSD telling me to start the phone manually.
So... that's my story.
I can't seem to find a single SBF that would work for me. I screwed up big time.
To make this clear: at this point I don't care about downgradeability or anything thelike. Whatever makes my Defy work again, is fine. Froyo, Ginger, ICS, or whatever.
So if anybody still has any advice for me, I'll love you forever! Promise!
Thanks a lot in advance for any help you sure will offer,
Clock

Try this if you haven't :
Go into stock recovery and make a factory reset
Sent from my MB526 using XDA App

As I said, i cannot even enter recovery.
I'd be really happy to find an sbf, that at least lets me reset my phone.

Have u tried this thread:
http://forum.xda-developers.com/showthread.php?t=1486731&highlight=bl6+downgrade

Clock1999 said:
As I said, i cannot even enter recovery.
I'd be really happy to find an sbf, that at least lets me reset my phone.
Click to expand...
Click to collapse
Im sorry , thought you mean custom recovery when you say you can't enter recovery.
I was in the nearly same situation but i never changed my bootloader...., by me out works to power up my phone with pressed volume button down to enter stock recovery ...
So I'm sorry i couldn't help you
Sent from my MB526 using XDA App

You just like to play with your defy, don't ya
Have you tried the suggestions under Common problems/questions in this guide?

Thanks for all the responses.
However all the guides seem to point to two options only:
1) Flash this one Eclair (which I already mentioned that I did, that it used to work, but since the "instant 100% on rebooting" doesn't anymore.
2) Factory Reset/Wipe. Which I cannot, as I don't get into Recovery Mode. All I can do atm, is flash SBFs. Defy won't enter Recovery Mode (which I guess is a pretty bad sign)
But the way I always understood it, was that you only need to be careful what you install, so you don't lose downgradeability. And that, once lost, you wouldn't be able to flash "older" roms, but newer ones would always be possible.
So shouldn't there always be a rom, that saves me?
What about Defy+ roms? Any advice on that? Which best to try first? So far, I haven't touched Defy+ roms at all.
Thanks for the support!

Did you try this:
When Off, press Vol. down and power.
You'll get an exclamation mark inside a triangle.
Press both Vol. up and down at the same time.
Now you suppose to be in stock recovery and you can do factory reset.
Do the above after flashing stock SBF.

Hello again!
In the meantime, I flashed some 30 different SBFs, and at least I learned something:
when the bootloader verson is 6, I get stuck at Motorola Logo. I can enter bootloader mode, but not Stock Recovery.
When bootloader is below 6, RSD Lite doesn't get the Dey to reboot, but shows instant 100% PASS.
Okay, maybe this was to be expected, but I didn't realize how very similar sounding ROMs have very different bootloaders...
So: can anybody guide me on whether installing a BL7 ROM would repair my problem?
I read elsewhere, that my green lense definitely will not work. Is this true, or are there fixes? And if it's true: if I'm sure the rest will be working again, I'll take that. If I just rob myself of future chances, I'll pass.
And hints here?
Thanks in advance so much! One week without a phone is pure horror!
Clock

If you haven't flashed BL7, then check this http://forum.xda-developers.com/showthread.php?t=1486731&highlight=bl6+downgrade&page=2

Clock1999 said:
Hello again!
In the meantime, I flashed some 30 different SBFs, and at least I learned something:
when the bootloader verson is 6, I get stuck at Motorola Logo. I can enter bootloader mode, but not Stock Recovery.
When bootloader is below 6, RSD Lite doesn't get the Dey to reboot, but shows instant 100% PASS.
Okay, maybe this was to be expected, but I didn't realize how very similar sounding ROMs have very different bootloaders...
So: can anybody guide me on whether installing a BL7 ROM would repair my problem?
I read elsewhere, that my green lense definitely will not work. Is this true, or are there fixes? And if it's true: if I'm sure the rest will be working again, I'll take that. If I just rob myself of future chances, I'll pass.
And hints here?
Thanks in advance so much! One week without a phone is pure horror!
Clock
Click to expand...
Click to collapse
If you flash any of the defy+ roms, camera won't work..there isn't a fix or patch for that..
Doesn't matter from where I send it, what matters is written above

corrinti said:
If you haven't flashed BL7, then check this http://forum.xda-developers.com/showthread.php?t=1486731&highlight=bl6+downgrade&page=2
Click to expand...
Click to collapse
Hi,
as I mentioned above, I already tried this ROM but it gives me the same result as all the others: stuck at bootlogo.
Maybe there is a special trick on which ROM I should flash before flashing this one?

Sorry, I do not know how to help. Just no idea now, try to dig the forum.
Once I had very similar problem - whatever I flashed I was stuck at bootlogo. And in my case I found out that just before flash my internal memory had been filled with some mess, which was not removed by any wipes (cache, dalvik cache, cache partition) and after any flash memory was too filled to start the system.
But finally I could flash Chinese eclair (CG5), which at last started horribly laggy, and I could wipe private data from a system - it gave me more than 1GB of internal memory back (from 40MB after all wipes and clean system install) and a way to flash whatever I wanted without a problem.
So even if it is also your problem, my way is not available to you now. Maybe you can find as small sbf file as possible and try then.

I'm sorry, but I don't quite get, which ROM saved you, and why that is no option to me. Can you please clearify? Thanks a lot!

Clock1999 said:
I'm sorry, but I don't quite get, which ROM saved you, and why that is no option to me. Can you please clearify? Thanks a lot!
Click to expand...
Click to collapse
I could use CG5 full sbf which will not boot for you as you put BL6 and maybe BL7.
To boot from flashed sbf it cannot be lower BL version.
I suppose that now you have a memory problem - flashing sbf do not wipe the memory.
At first I would try getting into stock recovery (even several times, just pull battery out, wait a minute, power, vol -, battery in) - if successful then do a factory reset and reboot.
If not I would try to find out a smallest sbf with proper BL version - just to give it more chance to boot with small memory available, if not then again try to get into stock recovery.

I'm the happiest guy around, as I finally revitalized my Defy.
For all you guys, who already tried everything: here's what worked for me.
Just let it rest a few days.
After I hadn't touched my phone for a couple of days, I thought about giving it one last try. So I flashed the Defy+ SBF (4th in this list: http://sbf.droid-developers.org/umts_jordanplus/list.php), like I've done multiple times before.
But this time, when rebooting, I wasn't stuck at the M-logo, but in a bootloop. And that gave me the smiles as I knew, that now I should be able to enter Stock Recovery again. From there on, it was no problem to get to a stable base again. After flashing the BL6 Froyo, I'm now on CM9 and everything is fine.
Thanks for all you help.
Sometimes, you just have to give it a rest...
Clock

It is a next such case I see in moto forums ;-) but it is really hard to give a tip: leave it for few days and check again

Use the sbf_flash for Linux
Sent from my MB526 using Tapatalk 2