think i bricked my nexus s please help - Nexus S General

ok, i was running 2.3.3 on my ns and finally got it unlocked then i decided to go for it and root it. my biggest mistake was not backing up anything after the unlock and then when i was rooting the phone it got stuck in the google screen
now i can get to the bootload screen but when i go to update from sd; it takes me there but i have nothing to back it up from
ive been trying to figure out a way to load a recovery backup to sd but the pc will not read the sd card anymore...
how can i fix this or am i stuck with an expensive paper weight?
please help

Question: Do you have clockworkmod on it?
(I figure you unocked and roote via adb/Fastboot - but if you can do it some other way and you did here they are]
Get ADB and Fastboot - figure out how the commands work (from Terminal/console/Command Prompt).
U need to put the files u want to flash (*.imgs in the same place as fastboot/ADB unless you're good a remembering your paths, if you have OS X simply drag and drop commands and files into terminal)
See if you can find a clockwork recovery image,
Download a stock rom - report back
Basically:
fastboot flash boot example.img
Fastboot flash recover example-recovery.img
that should work. I'll keep an eye on this thread.

After flashing CWR, go to mounts and storage and select mount USB storage, from there you can access your sdcard and copy files over.
The USB storage might take a minute or so to show up on your computer, if you're on windows go to my computer and click refresh until it shows up.
Sent from my Nexus S using XDA Premium App

been trying all day to do this and i cant seem to figure out the command prompt...as many times as i try cant get it to get anywhere.....tomorrow i will post pics of what the phone shows on screen
thanks for all the help

i do have a clockwork recovery but , not in the phone
i know that doesnt do any good and i did move files to adb but still would not do anything

redlilcivic said:
i do have a clockwork recovery but , not in the phone
i know that doesnt do any good and i did move files to adb but still would not do anything
Click to expand...
Click to collapse
Are you on a windows PC? If so I can give you all the files necessary and step by step instructions to fix your phone.
Sent from my Nexus S using XDA Premium App

yes i am on windows pc
please send if you can today ....i will not go to sleep until i have this phone up and running again
thanks

redlilcivic said:
yes i am on windows pc
please send if you can today ....i will not go to sleep until i have this phone up and running again
thanks
Click to expand...
Click to collapse
Here are the steps to get your phone back up and working:
1.Download this platform-tools.zip and extract it to your desktop
2.Connect your phone to the PC and enter bootloader mode
3.Press and hold Shift while right-clicking the folder you extracted 'platform-tools'
4.Click 'Open command window here' from the pop-up menu. cmd.exe window will open.
5.If the Bootloader is Unlocked continue to the next step. Type in the cmd.exe window 'Fastboot oem unlock' and follow the steps on the phone screen.
6.Type in the cmd.exe window 'fastboot boot cwr.img'.Your phone will restart and enter ClockWork recovery(CWR).
6.In CWR navigate with the volume keys and highlight 'mounts and storage' and select it by pressing the power button.
7.Then navigate down and select 'mount USB Storage'
8.On your PC, go to 'My computer' and press the refresh button until a 'removable disk' drive appears.
9.Double click on 'removable disk', You now have access to your SDcard on your phone!
10.Copy over a flashable .Zip Rom to the SDcard that you want to install on your phone, ie. Stock 2.3.4: Link(only for i9020T and i9023, dont install if you have i9020A), CM7: Link, etc.
11.Select 'unmount' in CWR when done copying files over. Then 'Go Back' to go to the CWR main menu.
12.Select 'wipe data/factory reset' in CWR and confirm with 'yes'
13.Select 'install zip from sdcard', then select 'choose zip from sdcard', then select the zip file you want to install and confirm.
14.Wait until the Rom installation is complete, then 'select reboot system now'.
15.Your phone will reboot and be up and running! Custom Roms tend to take longer to boot so be patient.
Let me know what happens.

WOW !!!
you are the man , i so appreciate it so much !!!
a couple of little things thoug....the android market not in the system and now when i try to mount the phone memory thru the pc wont mount.... do you know why?
thank you so much for all of your help !!!

redlilcivic said:
WOW !!!
you are the man , i so appreciate it so much !!!
a couple of little things thoug....the android market not in the system and now when i try to mount the phone memory thru the pc wont mount.... do you know why?
I suggest flashing cm7 stable.
thank you so much for all of your help !!!
Click to expand...
Click to collapse
Are you using CM7 nightly? I think it has a USB mount bug and the google apps including market are not in the CM7 rom and have to be flashed separately from the rom.
Sent from my Nexus S using XDA Premium App

USB Storage won't mount
The usb storage isn't showing up after I run cwm

Another restoration method you could try is using Odin to flash back to stock and retry the whole root process step by step ....I am on my phone right now so its hard for me to dig for threads but I know there are instructions and a stock Odin image floating about
Sent from my Nexus S using XDA App

ok my nexus is bricked and i followed the steps above with no luck. my pc wont recognize my phone, i can access clockword mod, but when i click mount usb storage nothing happens. im stuck at the google screen.

nickcash said:
ok my nexus is bricked and i followed the steps above with no luck. my pc wont recognize my phone, i can access clockword mod, but when i click mount usb storage nothing happens. im stuck at the google screen.
Click to expand...
Click to collapse
can you get into fastboot(power on pressing the volume up button and the power button together)?

simms22 said:
can you get into fastboot(power on pressing the volume up button and the power button together)?
Click to expand...
Click to collapse
yes, i can access clockwork mod also, but it the usb storage wont show up.....

Follow these instructions:
1. Slap self in head.
2. Power on phone while holding volume up&power button.
3. Now on the pc, Get the fastboot folder to the root of hard drive, I.E. C:\fastboot\. Also add to this folder your *.img files (radio, recovery, boot, system, data, etc.)
4. Open start menu.
5. In search box type cmd and press enter.
6. Now command window is open, type in that
cd C:\fastboot
fastboot flash * *.img
Replace the * with appropriate .imgs.
recovery, system, data, boot, radio.
Example
fastboot flash recovery recovery.img
7. Now that that is finished type
fastboot -w
fastboot reboot
8. Now the phone will reboot. BE PATIENT AS THIS MAY TAKE UP TO TEN MINUTES TO FULLY REBOOT INTO ANDROID!!! Disturbing it in anyway can cause corruption. I had this happen to my phone before. Literally walk away and come back in ten. Don't touch it, don't breath on it nothing. If you have any further problems either post here or PM me. Getting the .img files and fastboot is up to you. By the previous replies you should have them already.
Sent from my Nexus S using XDA Premium App

nickcash said:
ok my nexus is bricked and i followed the steps above with no luck. my pc wont recognize my phone, i can access clockword mod, but when i click mount usb storage nothing happens. im stuck at the google screen.
Click to expand...
Click to collapse
I think I had the same problem. first you need to check if your pc has the correct driver to accept the nexus s in bootloader mode. when that is done and you have colckword mod , you can but a custom rom on the sd card and flash that, then you'll be able to use your phone again.

Related

Idiot proof root

Finally S-Off. Thanks to alpharev (generous donation on its way)
Now first problem;
I am the least tech savvy guy on the planet. If not, around London
As you see, the problem is me. So I need a genuine idiot proof step by step guide.
Can someone recap everything in a simple way please?
Backup, root, overclock etc...
Anyone who helps will receive a guaranteed prayer from a religion of their choice
download eclair rom from shipped roms, install it, then download unrevoked, root with it and youll get custom recovery also with unrevoked, after that follow some other guides how to properly flash a custom rom thru that recovery.
(before the rooting part, install htc sync to get all the needed drivers. WARNING: before using unrevoked to root the device, uninstall just htc sync but everything else that was installed with it - leave it installed. btw im atheist )
Sent from my HTC Wildfire using Tapatalk
What I've found so far is;
I need to "root" my phone. Root means gaining superuser access right? (froyo 2.2. hboot 1.01)
http://forum.xda-developers.com/showthread.php?t=1130044
Link above supposed to do the job.
-After rooting the phone I need to "nandroid" backup my phone. Nandroid will appear in the boot menu when I root my phone right? wrong?
i didnt do any backups xD, i just soffed, installed 2.1 wwe ruu, rooted with unrevoked and flashed cm7
Sent from my HTC Wildfire using Tapatalk
The phone is not rooted. ROMs are rooted. You can very well follow that guide, but, I used Fastboot to install ClockWorkMod Recovery (Which is having all those options you are listing - ie Nandroid, Install ZIP From SDCard etc).
The Fastboot method needs just one command to install Clockworkmod Recovery, but needs to have Android SDK installed. If you are willing to do that:
- Download Android SDK - http://developer.android.com/sdk/index.html
- Download ClockworkMod Recovery - http://forum.xda-developers.com/showthread.php?t=1014498
- Extract the Recovery.img file from the 2nd link, and place it in your SDK Setup Path / Tools (eg: C:/android-sdk-windows/tools)
- Open a Command Window (cmd)
- Browse to the tools folder in this Command Window
- Type the command fastboot flash recovery recovery.img
- It will install ClockworkMod Recovery, you are done.
Then, simply follow Part 3 of this guide to install Custom ROMs and Stuff:
http://forum.xda-developers.com/showthread.php?t=824396
smokzye said:
i didnt do any backups xD, i just soffed, installed 2.1 wwe ruu, rooted with unrevoked and flashed cm7
Sent from my HTC Wildfire using Tapatalk
Click to expand...
Click to collapse
long winded way of doing it
we need a step by step with pics or at least a video on youtube, theres nothing there at teh moment.
Once you have S-OFF follow these steps:
1. Get fastboot.exe, CWM and the su binary from the attachment below, make sure you extract the archives.
2. Download Android SDK from here: http://developer.android.com/sdk/index.html
2. Install SDK to C:/, place fastboot.exe and the recovery.img in android-sdk/platform-tools
3. Shut down phone, get into bootloader (volume down + power button)
4. Select FASTBOOT using volume keys, press power button (you are now in fastboot mode)
5. Connect phone to computer, select disk drive.
6. Open cmd, type cd C:/android-sdk/platform-tools
7. now type "fastboot flash recovery recovery-clockwork-4.0.0.2-j_r0dd_mod-buzz.img" (no quotes)
8. Now you should have Clockworkmod installed, but still no root so:
9. Copy su-2.3.6.1-ef-signed to sdcard.
10. Get into bootloader again, select recovery.
11. Select "install zip from sdcard", confirm with trackball.
12. Scroll down to su-2.3.6.1-ef-signed, confirm the install, now you are rooted!
13. Do a nandroid backup from clockworkmod.
14. Repeat steps 9-12 but use the ZIP of ROMs, Kernels or Radio if you wish. Wipe all data before installing a fresh rom (ty calyxim ^^)
Complete list for ROMs/Kernels/Radio here: http://forum.xda-developers.com/showthread.php?t=1029318
I hope this is clear enough?
Thanks mate. Worked wonders. In what religion would you like your prayers?
I would like to make an addition to step 14; Wipe all data before installing a fresh rom
This is the most idiot proof way i could find, and that i could use lol..... big props to Nejc121
nejc121 said:
Okay, it took me some trying and stuff but I finaly found a way!
Okay, this is going to be simple step-by-step
FirsT: Copy this to the root of your SD card: http://forum.xda-developers.com/attachment.php?attachmentid=548407&d=1300751790
Second: Go into HBOOT and click yes when it asks you to update (note: Please make sure your SD card is FAT32 and not FAT, it must be FAT32 for this step to work.
Third: Remove the img file from your sd card and add this file: http://bit.ly/su2361ef
Fourth: Go into HBOOT and click Recovery!
Fifth: Click install zip from sdcard (or some thing like that)
Sixth: Click choose zip from sdcard
Seventh Locate your zip and let it update
AND YOU'RE DONE!
Have fun being free!
If you're having problems with the HBOOT not detecting the .zip update, please check if you SD card is FAT32.
Click to expand...
Click to collapse
smokzye said:
download eclair rom from shipped roms, install it, then download unrevoked, root with it and youll get custom recovery also with unrevoked, after that follow some other guides how to properly flash a custom rom thru that recovery.
Click to expand...
Click to collapse
NOPE. Wrong way after alpharev S-OFF.
smokzye said:
i didnt do any backups xD, i just soffed, installed 2.1 wwe ruu, rooted with unrevoked and flashed cm7
Click to expand...
Click to collapse
Have u done S-OFF with xtc clip or alpharevX. Let me know what u did including complete rooting process.
how do I get in to HBoot, when I press vol down and power nothing else happens beside to lock the phone and go to vibra mode
Make sure it's vol-, because the phone vibrates if you're holding vol+ and power...
7. now type "fastboot flash recovery recovery-clockwork-4.0.0.2-j_r0dd_mod-buzz.img" (no quotes)
when I write that in to cmd and press enter is wrtitten "waiting for device" for long time
When i do that i have phone still in hboot usb plug
Should I reboot and write in normal phone mode or .....?????
Try renaming 'recovery-clockwork-4.0.0.2-j_r0dd_mod-buzz.img' to 'recovery.img'. I had to do this in Linux, but worked fine after.
rupa30 said:
7. now type "fastboot flash recovery recovery-clockwork-4.0.0.2-j_r0dd_mod-buzz.img" (no quotes)
when I write that in to cmd and press enter is wrtitten "waiting for device" for long time
When i do that i have phone still in hboot usb plug
Should I reboot and write in normal phone mode or .....?????
Click to expand...
Click to collapse
installing and uninstalling htc sync helps. just to extract drivers I suppose...
Clockwork mod doesn't work properly for me. Whenever I select any option the menu disappears and the background just sits there. I can click really fast and it will just reappear and disappear rapidly.
Fix?
rupa30 said:
7. now type "fastboot flash recovery recovery-clockwork-4.0.0.2-j_r0dd_mod-buzz.img" (no quotes)
when I write that in to cmd and press enter is wrtitten "waiting for device" for long time
When i do that i have phone still in hboot usb plug
Should I reboot and write in normal phone mode or .....?????
Click to expand...
Click to collapse
That wait is normal if it below 2-3 min. But if it takes longer u should check the drivers.
That wait generally occurs if u connect the device after entering the command (happens to me everytime). If it is so, shouldn't disconnect the device and wait for a while till it detects.
If it is not so and wait is longer, then go for reinstalling the drivers.
Sent from my HTC Wildfire using XDA App
rupa30 said:
how do I get in to HBoot, when I press vol down and power nothing else happens beside to lock the phone and go to vibra mode
Click to expand...
Click to collapse
This occurs when pressing vol down + power on a full booted phone.
U should not do this. Switch off the device and then hold vol down + power. There goes into hboot mode. And for that recovery installation u should go into fastboot mode though from there.
as it was now clear, the waiting shouldn't be there now. Enter fastboot mode and try it
Sent from my HTC Wildfire using XDA App
AloneInShadow707 said:
Once you have S-OFF follow these steps:
1. Get fastboot.exe, CWM and the su binary from the attachment below, make sure you extract the archives.
2. Download Android SDK from here: http://developer.android.com/sdk/index.html
2. Install SDK to C:/, place fastboot.exe and the recovery.img in android-sdk/platform-tools
3. Shut down phone, get into bootloader (volume down + power button)
4. Select FASTBOOT using volume keys, press power button (you are now in fastboot mode)
5. Connect phone to computer, select disk drive.
6. Open cmd, type cd C:/android-sdk/platform-tools
7. now type "fastboot flash recovery recovery-clockwork-4.0.0.2-j_r0dd_mod-buzz.img" (no quotes)
8. Now you should have Clockworkmod installed, but still no root so:
9. Copy su-2.3.6.1-ef-signed to sdcard.
10. Get into bootloader again, select recovery.
11. Select "install zip from sdcard", confirm with trackball.
12. Scroll down to su-2.3.6.1-ef-signed, confirm the install, now you are rooted!
13. Do a nandroid backup from clockworkmod.
14. Repeat steps 9-12 but use the ZIP of ROMs, Kernels or Radio if you wish. Wipe all data before installing a fresh rom (ty calyxim ^^)
Complete list for ROMs/Kernels/Radio here: http://forum.xda-developers.com/showthread.php?t=1029318
I hope this is clear enough?
Click to expand...
Click to collapse
i get waiting for device..... after v long
which drivers shud i reinstall?
and anyway, how to enter fastboot mode? after i select the fastboot mode what do i do? it still stucks at the hboot screen

[Q] MY HTC WILDFIRE bricked

i rooted my mobile using alpharev and it turned my s-off and installed clockwork recovery mod 3.0.0.6 ,later i downloaded cynogen mod 7, and while updating it hung on now it is not at all booting it just shows htc in boot screev and reeboots again and again pls help me
Go back into recovery, wipe data and cache and the reflash CM7
Its definitely not bricked, so dont worry. Firstly, make sure you have wiped all data in Clockworkmod (Wipe Data / Factory Reset Option, Wipe Cache Partition also Format /system under Advanced). Once you have done this, try reflashing the CM7 ROM File. It should work. Reboot into Recovery by turning off your phone, pressing Vol Down + Power, Navigating to Recovery, and Pressing Power Button on it.
If it still fails, it would be better to use an updated version of Clockworkmod Recovery. This solved the bootloop issue for a few users.
3xeno said:
Its definitely not bricked, so dont worry. Firstly, make sure you have wiped all data in Clockworkmod (Wipe Data / Factory Reset Option, Wipe Cache Partition also Format /system under Advanced). Once you have done this, try reflashing the CM7 ROM File. It should work. Reboot into Recovery by turning off your phone, pressing Vol Down + Power, Navigating to Recovery, and Pressing Power Button on it.
If it still fails, it would be better to use an updated version of Clockworkmod Recovery. This solved the bootloop issue for a few users.
Click to expand...
Click to collapse
i tried it several times it says installing update and it again hangs pls help
3xeno said:
Its definitely not bricked, so dont worry. Firstly, make sure you have wiped all data in Clockworkmod (Wipe Data / Factory Reset Option, Wipe Cache Partition also Format /system under Advanced). Once you have done this, try reflashing the CM7 ROM File. It should work. Reboot into Recovery by turning off your phone, pressing Vol Down + Power, Navigating to Recovery, and Pressing Power Button on it.
If it still fails, it would be better to use an updated version of Clockworkmod Recovery. This solved the bootloop issue for a few users.
Click to expand...
Click to collapse
i tried it several times i removed my battery again booted to recoverymod wipe data/reset factory reset then install from sd card then i choosed the zib file .it then shows installing updating then it hangs pls pls pls help
i tried but it still hangs saying installing update and hangs on
Nivin Abraham said:
i tried but it still hangs saying installing update and hangs on
Click to expand...
Click to collapse
Please don't multi post. Update your Clockworkmod Recovery then. The guide can be found here:
http://forum.xda-developers.com/showthread.php?p=14693680
I had nothing but trouble using recorver 3.0.0.6 . Recovery 3.1.0.2 amd 2.5.07 have worked flawless for me though.
could u pls tell me how to update Clockworkmod Recovery , i downloaded ur file but i dont know how to update it
could u pls tell me how to update Clockworkmod Recovery
- First, Download the attachment in that thread, Place it somewhere, like on your C Drive, in a Folder called Fastboot.
- Then, Download the Updated Clockworkmod Recovery (Again linked in that thread). Extract the Recovery.img file from within the Zip file and place it in the Fastboot folder created in the step before.
- Connect your Wildfire to your PC. Turn it off, and turn on in HBoot Mode. (When your phone is switched off, then Press Vol Down + Power Simultaneously. Then, Navigate to Fastboot using the Volume Keys, and Press the Power Button. Your Wildfire is now in Fastboot Mode.
- Then, Open Command Prompt, and put in the following. (I am assuming your folder is created in C > Fastboot)
cd\
cd Fastboot
fastboot flash recovery recovery.img
(In the third step, I am assuming that the file name of the updated Clockworkmod Recovery is recovery.img) It will show two steps - Sending Recovery, and Writing Recovery. After this is done, your phone has the newer version of Clockworkmod Recovery and you can flash the ROM all over again and test.
3xeno said:
- First, Download the attachment in that thread, Place it somewhere, like on your C Drive, in a Folder called Fastboot.
- Then, Download the Updated Clockworkmod Recovery (Again linked in that thread). Extract the Recovery.img file from within the Zip file and place it in the Fastboot folder created in the step before.
- Connect your Wildfire to your PC. Turn it off, and turn on in HBoot Mode. (When your phone is switched off, then Press Vol Down + Power Simultaneously. Then, Navigate to Fastboot using the Volume Keys, and Press the Power Button. Your Wildfire is now in Fastboot Mode.
- Then, Open Command Prompt, and put in the following. (I am assuming your folder is created in C > Fastboot)
cd\
cd Fastboot
fastboot flash recovery recovery.img
(In the third step, I am assuming that the file name of the updated Clockworkmod Recovery is recovery.img) It will show two steps - Sending Recovery, and Writing Recovery. After this is done, your phone has the newer version of Clockworkmod Recovery and you can flash the ROM all over again and test.
Click to expand...
Click to collapse
pls dude dont get mad i am just frustrated dude i seriously dont know how to open command prompt. i did all the steps u asked me to do. i downloaded the file which u asked me to do i saved it in c/fast boot then extracted the file recovery-clockwork-3.2.0.0-j_r0dd_mod-buzz.img then i switched on my mobile in hboot mode then connected myusb cable to it, it showed hboot usb then i selected fastboot.
now it shows fastboot usb and these r the options given below
bootloader
reboot
reboot bootloader
power down
i seriously dont know how to open command prompt ur the only one who could help me so pls help me with all due respect
Nivin Abraham said:
pls dude dont get mad i am just frustrated dude i seriously dont know how to open command prompt. i did all the steps u asked me to do. i downloaded the file which u asked me to do i saved it in c/fast boot then extracted the file recovery-clockwork-3.2.0.0-j_r0dd_mod-buzz.img then i switched on my mobile in hboot mode then connected myusb cable to it, it showed hboot usb then i selected fastboot.
now it shows fastboot usb and these r the options given below
bootloader
reboot
reboot bootloader
power down
i seriously dont know how to open command prompt ur the only one who could help me so pls help me with all due respect
Click to expand...
Click to collapse
i downloaded only the updated clockworkmod recovery ,i dont know which (Download the attachment in that thread) i dont know which file ur asking me to download from that thread
Nivin Abraham said:
pls dude dont get mad i am just frustrated dude i seriously dont know how to open command prompt. i did all the steps u asked me to do. i downloaded the file which u asked me to do i saved it in c/fast boot then extracted the file recovery-clockwork-3.2.0.0-j_r0dd_mod-buzz.img then i switched on my mobile in hboot mode then connected myusb cable to it, it showed hboot usb then i selected fastboot.
now it shows fastboot usb and these r the options given below
bootloader
reboot
reboot bootloader
power down
i seriously dont know how to open command prompt ur the only one who could help me so pls help me with all due respect
Click to expand...
Click to collapse
Command Prompt is to be opened on your Windows PC. Not on your mobile. Once you have entered into Fastboot Mode and your Wildfire is connected to your PC, thats all you need to do.
Open Start Menu. Then Select Run. Then type "cmd" (Without Quotes) and Press Enter. This will open the Command Prompt. Then follow what I said before.
(Note - If your folders name is fast boot, then replace fastboot in the commands above with fast boot. It's basically the name of your folder).
Rename the IMG file you extracted to Recovery.img, it will typing the command easier.
Lastly, my only request to you - Make only 1 post at a time. Others here are normal members and not someone with the full day free . When you continuously post something, its frustrating to read and I dont feel like replying anymore to that person.
3xeno said:
Command Prompt is to be opened on your Windows PC. Not on your mobile. Once you have entered into Fastboot Mode and your Wildfire is connected to your PC, thats all you need to do.
Open Start Menu. Then Select Run. Then type "cmd" (Without Quotes) and Press Enter. This will open the Command Prompt. Then follow what I said before.
(Note - If your folders name is fast boot, then replace fastboot in the commands above with fast boot. It's basically the name of your folder).
Rename the IMG file you extracted to Recovery.img, it will typing the command easier.
Lastly, my only request to you - Make only 1 post at a time. Others here are normal members and not someone with the full day free . When you continuously post something, its frustrating to read and I dont feel like replying anymore to that person.
Click to expand...
Click to collapse
i opened command prompt and till the second step which u asked me to type was successfull
cd\
cd Fastboot
after this u asked me to type
fastboot flash recovery recovery.img
it says fastboot is not recognized as an internal or external command,operable program or batch file.
i dont know how to proceed further ,i am really sorry for multi posting i am new to xda dude , i am terribly sorry pls forgive me
You need to have HTC driver for doing that. Install this iin your windows PC.
Link: http://db.tt/BOJCbnD
Go with the process after installing this.
Sent from my HTC Wildfire using XDA App
Nivin Abraham said:
i opened command prompt and till the second step which u asked me to type was successfull
cd\
cd Fastboot
after this u asked me to type
fastboot flash recovery recovery.img
it says fastboot is not recognized as an internal or external command,operable program or batch file.
i dont know how to proceed further ,i am really sorry for multi posting i am new to xda dude , i am terribly sorry pls forgive me
Click to expand...
Click to collapse
Dont worry about it. That was just my view.
Anyway, I hope the folder creation was correct. I hope that when you extracted the Android Win Tools folder into your C:\Fastboot folder, you deleted the original folder?
ie:, In your Fastboot folder, you shouldnt have any other folder/sub folder, and it must contain only these 4 files:
- adb.exe
- AdbWinApi.dll
- AdbWinUsbApi.dll
- Fastboot.exe
Once you have ensured this, then make sure you enter Fastboot mode on your Wildfire Correctly.
- Start HBoot mode
- Then Plug in the USB Cable
- Press Power Button, then another set 4 Options will appear, the first being Fastboot
- Then Press Power Button again
After this, try running the commands in command prompt again. Let me know how it goes.
And it you still face any issues with fastboot flashing, then see my sign for the post link to complete guide. Go there and download attached pc49img.zip and put it on your root of memory card (formatted previously with fat32 partition) . Then reboot to hboot menu to update the recovery. That's all.
Sent from my HTC Wildfire using XDA App
bharatgaddameedi said:
And it you still face any issues with fastboot flashing, then see my sign for the post link to complete guide. Go there and download attached pc49img.zip and put it on your root of memory card (formatted previously with fat32 partition) . Then reboot to hboot menu to update the recovery. That's all.
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
dude ur the man it worked i am so so so happy no words to express it showed
sending recovery
writing recovery
Nivin Abraham said:
dude ur the man it worked i am so so so happy no words to express it showed
sending recovery
writing recovery
Click to expand...
Click to collapse
Great, Hope they were followed by the words "OK". If so, you have the new Recovery 3.2.0.0 on your Wildfire.
Getting the hang of Fastboot is very important IMO. It helps flashing Recoveries in 1 go, and, also helps restoring Nandroid Restores, among many other features. I am glad you have experienced it, and, not gone the "PC49IMG" way.

[Q] Phone Not Going To Recovery! Need Help!

So my rooted Mytouch 4g S=OFF is stuck at the MyTouch screen and stays there, then when i do volume down plus power it takes me to hboot then automatically starts going through my sd card for like 3 files then says do u want to start update volume up yes down no i have tried both in the end it reboots and is again frozen! I tried rebooting it with the vol down and power with my sd card out but i still cant do anything! Please help!
ashmal411 said:
So my rooted Mytouch 4g S=OFF is stuck at the MyTouch screen and stays there, then when i do volume down plus power it takes me to hboot then automatically starts going through my sd card for like 3 files then says do u want to start update volume up yes down no i have tried both in the end it reboots and is again frozen! I tried rebooting it with the vol down and power with my sd card out but i still cant do anything! Please help!
Click to expand...
Click to collapse
It sounds like you have a PD15IMG.zip file in the root of your SD card. That's what the bootloader is detecting when it asks you if you want to update or not. Remove that file and it will bypass the update step and take you to the bootloader main menu. There you can select recovery. From there, I would re-download your ROM installation file, full wipe (data, cache, Dalvik-Cache), and re-flash your ROM.
I tried that
i tried that too but it still checks for those but then lets me select recovery but when i click recovery it gives me a picture of a phone and a red triangle thanks though any more help would be much appreciated!
ashmal411 said:
i tried that too but it still checks for those but then lets me select recovery but when i click recovery it gives me a picture of a phone and a red triangle thanks though any more help would be much appreciated!
Click to expand...
Click to collapse
I don't think you have a custom recovery yet, download the rom manager from the market and have it flash a recovery for you. When you go back you should see something very different.
If for you already have flashed the recovery, press the power button when you see the lil phone pic and your recovery should come up
mark manning said:
I don't think you have a custom recovery yet, download the rom manager from the market and have it flash a recovery for you. When you go back you should see something very different.
If for you already have flashed the recovery, press the power button when you see the lil phone pic and your recovery should come up
Click to expand...
Click to collapse
I cant download anyting because i cant even get to my homescreen
ashmal411 said:
I cant download anyting because i cant even get to my homescreen
Click to expand...
Click to collapse
can you get into your phone using adb/fastboot?
flash recovery that way.
saranhai said:
can you get into your phone using adb/fastboot?
flash recovery that way.
Click to expand...
Click to collapse
sorry im a noob at this i dont know how to do that thank you for trying to help though if you have anymore please help
ashmal411 said:
sorry im a noob at this i dont know how to do that thank you for trying to help though if you have anymore please help
Click to expand...
Click to collapse
google search androidSDK, and install it on your computer.
there are millions of threads out there telling you how to set it up so i'd suggest you read some of those. once you get adb set up, connect your phone (USB DEBUGGING ON! enable in settings/applications/development).
type "adb devices" without quotes to see if your device is connected. then type
Code:
su
adb reboot bootloader
the phone should reboot into fastboot, if it isn't in fastboot, manually scroll to it with the volume buttons and select with power button.
now, you need the recovery image, i'll post it at the bottom of this post. after you get the recovery image, move it to androidSDK/tools or wherever your adb/ fastboot folder is located, and rename it to "recovery.img".
now, type
Code:
fastboot flash recovery recovery.img
it should give you two OKs, if it does, then you're all set, reboot the phone into bootloader, select recovery, and flash a rom on there
saranhai said:
google search androidSDK, and install it on your computer.
there are millions of threads out there telling you how to set it up so i'd suggest you read some of those. once you get adb set up, connect your phone (USB DEBUGGING ON! enable in settings/applications/development).
type "adb devices" without quotes to see if your device is connected. then type
Code:
su
adb reboot bootloader
the phone should reboot into fastboot, if it isn't in fastboot, manually scroll to it with the volume buttons and select with power button.
now, you need the recovery image, i'll post it at the bottom of this post. after you get the recovery image, move it to androidSDK/tools or wherever your adb/ fastboot folder is located, and rename it to "recovery.img".
now, type
Code:
fastboot flash recovery recovery.img
it should give you two OKs, if it does, then you're all set, reboot the phone into bootloader, select recovery, and flash a rom on there
Click to expand...
Click to collapse
here's the recovery image:
saranhai said:
google search androidSDK, and install it on your computer.
there are millions of threads out there telling you how to set it up so i'd suggest you read some of those.
Click to expand...
Click to collapse
To make it easier for the OP, this thread gives you all you need to know to get ADB up and running.
Also, the above fastboot instructions are correct, but will only work with the engineering bootloader. Hopefully the OP's phone has that.
i cantturn on usb debuggiing because io cant get into my phone
TeeJay3800 said:
To make it easier for the OP, this thread gives you all you need to know to get ADB up and running.
Also, the above fastboot instructions are correct, but will only work with the engineering bootloader. Hopefully the OP's phone has that.
Click to expand...
Click to collapse
lol thanks for the tip
ashmal411 said:
i cantturn on usb debuggiing because io cant get into my phone
Click to expand...
Click to collapse
was usb debugging on before..?
nope it was not on
ashmal411 said:
nope it was not on
Click to expand...
Click to collapse
oh.... that's a problem...
ashmal411 said:
nope it was not on
Click to expand...
Click to collapse
ok that's ok, you can still flash recovery through fastboot, which doesn't need USB debugging on.
so steps:
1) download the recovery image and rename to "recovery.img"
2) move the image to wherever your adb/fastboot tools are located
3) open command prompt (in windows)
4) cd to where your adb/fastboot tools are located
5) REBOOT PHONE INTO HBOOT, THEN CONNECT TO COMPUTER
6) manually scroll and select fastboot using the volume and power buttons
7) type
Code:
fastboot devices
to make sure your phone is detected.
8) if it is, type
Code:
fastboot flash recovery recovery.img
should give you two OKs.
9)once the recovery is in there, flash a rom on

Help Help Help

Hi
Im stuck in a horrible situation here,
I have been running clean rom on nexus for the past couple of days and decided to try another rom but i went into cmw mode and formated data and system and now i can boot my nexus or run cmw ??
Nexus root kit says im not in ADB mode and need to set nexus in debugging mode ARRRRGHHHHHH i cant because i cant load into JB ??
Help please anyone
Paul
Plug you tablet into the usb port on the computer..
hold the down vol key then hold the power key
Sometimes it takes a few times to get this to work .It should take you to the boot-loader screen . Use the vol + vol - key and scroll to where it says reboot boot-loader . or just boot-loader hit the power key..
you should now be able to get into cwm with the above and select recovery.. If that fails try below.. But much better tutorial on the programs thread ..
when you come back to the boot-loader screen you should see device found on your computer. Start the nexus root tool kit.. Go to advance and flash recovery partion back to cwm or twrp.. then flash custom rom..
silly guy you deleted the rom you were going to flash..
now you can also at where you get flash recovery . FLASH TWRP 2.2.2 I THINK (LATEST ..
PUT a rom on a flash drive .. using otg cable boot into TWRP AND You can flash the rom from otg storage..
hope this helps For some reason this device will hand with cwm without a usb cable connected to something powered.. can be another cell cable tv box your tv or anything .. Computer of course
I can load CMW now but its no use as i havent got a zip rom on the sdcard now grrrr
Paul
erica_renee said:
Plug you tablet into the usb port on the computer..
hold the down vol key then hold the power key
Sometimes it takes a few times to get this to work .It should take you to the boot-loader screen . Use the vol + vol - key and scroll to where it says reboot boot-loader . or just boot-loader hit the power key..
you should now be able to get into cwm with the above and select recovery.. If that fails try below.. But much better tutorial on the programs thread ..
when you come back to the boot-loader screen you should see device found on your computer. Start the nexus root tool kit.. Go to advance and flash recovery partion back to cwm or twrp.. then flash custom rom..
silly guy you deleted the rom you were going to flash..
now you can also at where you get flash recovery . FLASH TWRP 2.2.2 I THINK (LATEST ..
PUT a rom on a flash drive .. using otg cable boot into TWRP AND You can flash the rom from otg storage..
hope this helps For some reason this device will hand with cwm without a usb cable connected to something powered.. can be another cell cable tv box your tv or anything .. Computer of course
Click to expand...
Click to collapse
Thanks for your help but not getting anywhere, think it maybe the end of this tab !!!
Now i have a android with red triangle so im pretty sure this is a dead nexus 7 !!!
vphotographic said:
Now i have a android with red triangle so im pretty sure this is a dead nexus 7 !!!
Click to expand...
Click to collapse
use the nexus tool.. to do the stock rom / unroot .. It will ask of your tablet can boot.. Select no..
it will boot you into fast boot and put a image back on your tablet....
You poor guy .. I think you need a hug...
OK i will write you a little guide to get you going again
This is pretty much what the scripts do, but you will be doing it by hand (always good to know what to do in case of emergency)
if you have the red triangle then you havnt flashed CWM, you are only booting it
1. Download the recovery.zip attached below
2. extract it to the root of your C: drive
3. open a command prompt (cmd) and CD to the directory
Code:
C:
cd recovery
4. rename your downloaded rom to rom.zip (for simplicity) and copy it into the recovery folder you extracted
there should now be 6 files in the folder
Code:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
recovery.img
rom.zip
5. boot your phone into bootloader (power & volume)
plug N7 into PC
6. in your cmd window type
Code:
fastboot devices
(to make sure your N7 is detected)
you should see something like
XXXXXXXXXXXXXXX (BOOTLOADER)
7. type
Code:
fastboot boot recovery.img
about 20seconds and you should now be booted into Clockwork Mod
8. go to mounts & storage and click on mount /data (not sure if this is neccessary but do it anyway)
9. make sure your phone is detected in recovery by typing
Code:
adb devices
your should see
XXXXXXXXXXXXXXX (RECOVERY)
10.back to your cmd window and do
Code:
adb push rom.zip /sdcard/
this will take a while to do (probably about 5 mins)
11. Once complete you can install the rom as usual in CWM
I did this once while setting up my dads n7. I wrongly assumed that cwr had USB storage mount as an option so I didn't copy the ROM over.
The best option for those in this situation without much hassle is to use the all in one toolkit to download and install stock ROM from fast boot. It will download stock image onto your PC and then flash it from fast boot. It will also reflash stock recovery.
Sent from my Nexus 7 using Tapatalk 2
I have had that android with red triangle twice. Believe me youre nexus is far from over. Just used the toolkit and flashed stock. Problem solved. When i used it there was an option that says...device on or cant boot up. So i just selected cant boot up. Put the device in bootloader and thats it.
Sent from my Nexus 7 using Tapatalk 2
that is correct, you cant mount usb storage, but you can quite easily adb push files from your pc to your /sdcard/ partition then just install them in CWM
i just got my N7 this afternoon, checked for defects, hastily download ParanoidAndroid N70000 (not realising that N70000 is the Galaxy note)
unlocked bootloader, flashed CWM
wiped System/Data then tried installing new rom only to realise that it wont install and because i have wiped system i have no android
easiest way for me was by downloading correct rom
adb push newrom.zip /sdcard/
then when you go to install my new rom is now on internal memory

Installed cutom rom now stuck on google screen :(

Ive checked other nexus 7 threads... but this isn't the case.
My nexus 7 is stuck on the google Boot I cannot rub Fastboot or recovery from the toolkit .. nothing at all. It cant find the device .
When I plug in the usb it still makes the sound on windows and so on.
It happened when I was prepairing to install a Custom ROM using JROMFlasher..
I followed all the steps, and when it came to install the ROM to the SD card it just rebooted (transferred to quickly I thought)
And then Ever since it has Just been stuck on the google screen.
I am quite pissed :L
Any Ideas?
I would be quite pissed at your self for using a toolkit. this is a Nexus device and is easily unlocked manually with the proper tools that google provides themselves. Boot into fastboot mode (Hold Power and the two volume keys). Once in fastboot mode you can flash a recovery and then once in recovery you can adb push a ROM to the tablet and flash the ROM the correct way. You really should read up on how to do thing manually instead of resorting to the quick and easy method.
Download the zip located here : platform-tools.zip Extract the contents to a folder name the folder Nexus7 or whatever you want.
Once thats done go ahead and open a command prompt window in that folder you can do that by Shift+Right clicking inside the folder and selecting "Open Command Prompt Here" or if on XP then open CMD and
Code:
cd C:\Users\Name-of-User\Desktop\Nexus7
Once in the CMD issue the command
Code:
fastboot devices
To see if the computer recognizes the device in fastboot mode. It should spit out a gibberish looking code with ....... Device at the end.
Then you going to flash the recovery to do that you issue this command
Code:
fastboot flash recovery name-of-recovery.img
inside the zip the openrecovery-twrp-2.3.1.0.img that is what you will put in place of "name-of-recovery.img" it will show on the screen writing recovery when its done hit the volume up button until the "START" Turn to "Recovery Mode." Then hit the power button you will boot into recovery mode. Once in recovery mode place the ROM.zip you want to flash in the same folder as the stuff you extracted to.
Then issue this command
Code:
adb push Name-of-ROM.zip /data/media
Of course you will replace name-of-ROM.zip with the actual name of the ROM you are flashing. Make sure you also have a gapps packaged which can be found on goo.im/gapps/ latest package is gapps-jb-20121011-signed.zip you will want to adb push that as well.
IF all is done correctly you should be able to install that ROM please follow this procedure.
1. Go to Wipe
2. Factory Reset (this will delete all your apps and apps data not the sd card)
3.Wipe Cache Partition
4. Wipe Dalvik Cache
5. Format System
6. Go to install and find the two ROM.zip and Gapps package at the bottom of the root of the sd card (/sdcard0)
7. Select to flash the ROM and then the Gapps
8. Reboot
Click to expand...
Click to collapse
You should be good to go now.
ÜBER™ said:
I would be quite pissed at your self for using a toolkit. this is a Nexus device and is easily unlocked manually with the proper tools that google provides themselves. Boot into fastboot mode (Hold Power and the two volume keys). Once in fastboot mode you can flash a recovery and then once in recovery you can adb push a ROM to the tablet and flash the ROM the correct way. You really should read up on how to do thing manually instead of resorting to the quick and easy method.
Click to expand...
Click to collapse
Your a good man Yeah I'm not claiming to know anything about Android at all I have literally just started looking into how the system works.. But I have learnt from my quick attempt at everything mistake now.. Once again thanks.
QuantumCipher said:
Your a good man Yeah I'm not claiming to know anything about Android at all I have literally just started looking into how the system works.. But I have learnt from my quick attempt at everything mistake now.. Once again thanks.
Click to expand...
Click to collapse
Its all good wrote you up a quick guide follow that and it'll get you back on track .
ÜBER™ said:
Its all good wrote you up a quick guide follow that and it'll get you back on track .
Click to expand...
Click to collapse
It's flashing the Stock now Thanks for your time. And for also sending me in the right direction (Y)
QuantumCipher said:
It's flashing the Stock now Thanks for your time. And for also sending me in the right direction (Y)
Click to expand...
Click to collapse
Not really necessary but alright. remember going back to stock deletes the entire tablet memory So make sure to back up your important data.
ÜBER™ said:
Not really necessary but alright. remember going back to stock deletes the entire tablet memory So make sure to back up your important data.
Click to expand...
Click to collapse
It was formatted anyway there was no Important data .. Actually you maybe able to answer something for me.
When I rooted my Nexus before all this.. It was rooted as I done previous tests.
What do you use to move files to and from the tablet such as root files? As I want to modify the "X" boot logo animation. I noticed it is just a bunch of PNG images that need replacing..
QuantumCipher said:
It was formatted anyway there was no Important data .. Actually you maybe able to answer something for me.
When I rooted my Nexus before all this.. It was rooted as I done previous tests.
What do you use to move files to and from the tablet such as root files? As I want to modify the "X" boot logo animation. I noticed it is just a bunch of PNG images that need replacing..
Click to expand...
Click to collapse
Acutally its a zip of multiple components not just png's. The bootaniamtion.zip as a whole is what makes up that boot up animation. If you want to change the bootanimation you would replace that entire zip with one that you want. And then set the permissions and reboot. Some will even have a flashable. In order to modify system files you need root and a root explorer. There are multiple on the play store i would recommend Root Explorer if you have the money otherwise ES File Manager or Solid Explorer.
Bricked after wiping with twc
When I look for fastboot devices, nothing happens...
where do I go from here?
http://forum.xda-developers.com/showthread.php?p=35777264
Sent from my Nexus 7 using xda premium

Categories

Resources