Database Users

Swype Tap-Hold Problem

It seems that when using swipe in portrait mode I cant get tap and hold to work. I.E selecting symbols and numbers.
It works well in landscape though.
Anyone have this issue? Is there a fix?

I (and others have mentioned it) gave up on the 3.9 swype for exactly that problem.

well that's not cool... I was getting good at it too. oh well, guess I'll deal with it till an update comes out.
thanks

Two things that helped me:
1) Set the error tolerance to maximum in the opitons.
2) Press on the top half of the button and keep your finger as steady as you can.

It works for me. Though, it is really really sensitive to movement. It does take some pratice and steady finger to get the tap-hold to work. It's usually the '?' that I'm going for. Sometimes it will produce 'mm' or 'mn'..
It seems like they need to make it less sensitive for movement if you're just holding one a single key and not swiping. Or make it deduce that I'm going for the '?' and NOT 'mm' which does not make much sense..

Newman180 said:
well that's not cool... I was getting good at it too. oh well, guess I'll deal with it till an update comes out.
thanks
Click to expand...
Click to collapse
I had the same thing happen. A LOT of our Swype's are faulty. The trick is to google or search xda for Swype 2.0 wvga. This works LIKE ITS SUPPOSED TO. You can use it and the qwerty keyboard arrangement is arranged propertly on the numeric keyboard tab.

steve austin said:
I had the same thing happen. A LOT of our Swype's are faulty. The trick is to google or search xda for Swype 2.0 wvga. This works LIKE ITS SUPPOSED TO. You can use it and the qwerty keyboard arrangement is arranged propertly on the numeric keyboard tab.
Click to expand...
Click to collapse
Thanks, I'm doing that now. What version came on TMOHD2?

Ok so I downloaded/installed the cab for Swype 2.0 with the htc skin
http://forum.xda-developers.com/showthread.php?t=60494
The skin looks different, which is great, but swype acts the same. Doesnt allow symbols. Also when I go into "about swype" it is the same version and build date of 1/09
Did I do something wrong?

Newman180 said:
Thanks, I'm doing that now. What version came on TMOHD2?
Click to expand...
Click to collapse
3.9 i believe. garbage (at least on mine).

So, does the Swype 2.0 wvga link fix the problem? Cause this press and hold BS is really driving me nuts.
EDIT Just downloaded, it seems to be SLIGHTLY more accurate/easier, but still not as simple as they make it look in the video, it's still quicker to switch tabs and type in whatever you need to.

donalgodon said:
Two things that helped me:
1) Set the error tolerance to maximum in the opitons.
2) Press on the top half of the button and keep your finger as steady as you can.
Click to expand...
Click to collapse
I second this fix. However, you have to place your whole finger on top of the key (contacting the key to the left and right of the key you are trying to press as well) and hold in order to get the secondary set to work.
Swype settings are accessible via Settings tab, Menu, All Settings, Personal, Input, Swype Options.
EDIT: Nevermind, I was only getting lucky with the long press. It still seems to only work about 10% of the time with the 3.9 stock version.

Y not just use the symbol button? It's faster and better than pressing n holding. And as for using the ?, just pressit and drag or swype to the space bar. Same for . and !

aceo07 said:
It works for me. Though, it is really really sensitive to movement. It does take some pratice and steady finger to get the tap-hold to work. It's usually the '?' that I'm going for. Sometimes it will produce 'mm' or 'mn'..
It seems like they need to make it less sensitive for movement if you're just holding one a single key and not swiping. Or make it deduce that I'm going for the '?' and NOT 'mm' which does not make much sense..
Click to expand...
Click to collapse
For the ? symbol, there's an easy alternative - swype (drag) from the ? key to the spacebar. Wish all the symbols & numbers did the same thing, would prefer it over the click & hold method.
Also - everyone knows about dragging from the swype symbol to around the #5 to go to the numeric keypad and draw from the swype symbol to umm.. the one to the right to go to the arrows/copy/paste screen shortcut?
Anyway, my main Swype problems are this hold/press thing & how hard it is to do manual typing for usernames & password. It's for these reasons that I use SlideIT over Swype at the moment.

Yep... doesnt work for me either. Sucks having go to down and switch it to number mode just to select symbols but I still like it over the regular keyboard.

srgntdvs said:
Y not just use the symbol button? It's faster and better than pressing n holding. And as for using the ?, just pressit and drag or swype to the space bar. Same for . and !
Click to expand...
Click to collapse
Ohh I love you! This works great - very fast.

brownhornet said:
Yep... doesnt work for me either. Sucks having go to down and switch it to number mode just to select symbols but I still like it over the regular keyboard.
Click to expand...
Click to collapse
I was about to give up on swype because of the issue.
then I saw that space bar on random tutorial, it makes it a little bit easier, but still. other symbols are very annoying.

Oops mistake!

Search Google or XDA for SWYPE 2.0 for WVGA. All the problems will be solved. Swype 3.9 is horrid. 2.0 is the truth.

Testing out version 2 on my TMOUS (version 3.9 by drefault). So far seems to be working much better - I can press & hold & get the alternate puncuation/numbers (although I still say sliding any alternate keystroke to the spacebar would be better).
QUESTION - how the heck do I get to options on this version? In 3.9 you went to symbols & help the Swype key down. Google says I click the arrow (stock rom, so 6.5.1) & go to options, but I only gen sense-like options instead.
There another way to get to the options in 2.0 ?

polstein said:
Testing out version 2 on my TMOUS (version 3.9 by drefault). So far seems to be working much better - I can press & hold & get the alternate puncuation/numbers (although I still say sliding any alternate keystroke to the spacebar would be better).
QUESTION - how the heck do I get to options on this version? In 3.9 you went to symbols & help the Swype key down. Google says I click the arrow (stock rom, so 6.5.1) & go to options, but I only gen sense-like options instead.
There another way to get to the options in 2.0 ?
Click to expand...
Click to collapse
HTC/ Microsoft and Swype don't make it easy do they:
1. Go to settings tab on sense
2. tap menu
3. selct "all settings"
4. select "personal" folder
5. select "input options"
6. BAM!

could someone put up pictures of swype on streak in both portrait and landscape?

please. and review it briefly

ill post screen shots later ....
but simply its perfect ...
lack of a trackball or anything on streak can be a real pain if you make a mistake tho.... could do with a keyboard with arrow keys.

thanks dude

In my review
I posted some keyboard comparison pictures.
I can't post any links but it's the most recent post on YourTechMinds . com

JDouce said:
ill post screen shots later ....
but simply its perfect ...
lack of a trackball or anything on streak can be a real pain if you make a mistake tho.... could do with a keyboard with arrow keys.
Click to expand...
Click to collapse
Have a go with SLIDE IT i have been using it for a few days now and its very good same as swype or you can disable the swype part, has a lot of features including ARROW KEYS !!!!!!

ive installed swype but i can see the config page but cant get it to replace the standard keyboard...come to think of it i could never get it working on the HD2 either....must be me....

ComfySofa said:
ive installed swype but i can see the config page but cant get it to replace the standard keyboard...come to think of it i could never get it working on the HD2 either....must be me....
Click to expand...
Click to collapse
Open a browser page and hold down on the browser Address and a box will pop up to give you the option to change keyboard

lufc said:
Open a browser page and hold down on the browser Address and a box will pop up to give you the option to change keyboard
Click to expand...
Click to collapse
Nice one lufc, I couldn't work it out on the Dell but knew how to do it on the HD2
Does anyone know why the when using swype in landscape mode, the text area becomes massive, shifting previous texts off screen....there's about 8 or 9 lines available and almost the whole length of the screen....is there anyway to reduce this box so it expands when filled like in portrait mode?
Thanks

Horrible Keyboard On 2.1, Any way To Put Keyboard From 1.6?

A few hours ago I updated to the 2.1.
The main thing that is far worse is the keyboard. It seems far less accurate, I'm making many more mistakes than before, sometimes I have to press the same button twice, it seem's unresponsive and slow, if you rush it you make mistakes.
It's like it's running slow and there is no num pad, the keyboard is much worse than 1.6
Is there ANY way I can use the old keyboard? I wish there was a way I could use the previous full sized keyboard, quicker and more responsive...

Matter of fact, what does everyone think the best keyboard for the streak is?

Not sure if I am doing something wrong , but I have been unable to use any other keyboards , they install OK , and I can select them , but when I go to select it , it's still the Dell one that pops up . I used Better Keyboard on 1.6 and preferred it.
With the new one , I seem to "miss" the top row of keys for some strange reason ! , usually I'll notice I have missed an "e" in a word .

Same, at first kept missing the top row of keys, you just need to hit a little bit lower.
Or use a multitouch keyboard like smart keyboard, just annoying that it takes up the whole screen.

I'm using the SWYPE keyboard. Works great for me on 1.6

dairymasta said:
Same, at first kept missing the top row of keys, you just need to hit a little bit lower.
Or use a multitouch keyboard like smart keyboard, just annoying that it takes up the whole screen.
Click to expand...
Click to collapse
Exactly what I'm getting and it's really pissing me off. I now dread to use the internet or type message as nearly every word I type has a mistake...
zoidster said:
Not sure if I am doing something wrong , but I have been unable to use any other keyboards , they install OK , and I can select them , but when I go to select it , it's still the Dell one that pops up . I used Better Keyboard on 1.6 and preferred it.
With the new one , I seem to "miss" the top row of keys for some strange reason ! , usually I'll notice I have missed an "e" in a word .
Click to expand...
Click to collapse
Same here, crappy keyboard, I hate using the internet/sms messages now.
I really wish to have the same keyboard as 1.6, also with the numpad, saves me everytime clicking on the ?123 button to type in a number and then click it off, more slow

Funk2641 said:
Matter of fact, what does everyone think the best keyboard for the streak is?
Click to expand...
Click to collapse
The original of course, from 1.6!

kanej2006 said:
Exactly what I'm getting and it's really pissing me off. I now dread to use the internet or type message as nearly every word I type has a mistake...
Same here, crappy keyboard, I hate using the internet/sms messages now.
I really wish to have the same keyboard as 1.6, also with the numpad, saves me everytime clicking on the ?123 button to type in a number and then click it off, more slow
Click to expand...
Click to collapse
I haven't upgraded to 2.1 yet as i rather wait for the official OTA, I am also using swype keyboard I find it quite good too. I also found a stock one a bit difficult to type on with out making typo's but it was nice idea having the number pad. But I heard many people were crying about it being rubbish.
Funny now seeing people who have upgraded to 2.1 and with the new dell stock keyboard people are also making noise about how poor it is. Looks like dell can't get the keyboard right. I think dell should left the original keyboard and pre-install swype for people. This give users best of both worlds I think.

The original keyboard was rubbish, agreat idea but impossible to type accurately. The new keyboard is better but still not great. Swype is be rest so far even as a touch type.
Ps to get keyboards to work (ie instead of the default), first enable it in the settings then hold you finger in any typing box until the options appear then choose input, then chose desired keyboard.
Sent from my Dell Streak using XDA App

Ps the best keyboard will be this one......
http://www.androidpolice.com/2010/0...-phones-screen-even-with-no-keyboard-present/
Hopefully!
Sent from my Dell Streak using XDA App

Agreed. Stock keyboard + swype keyboard combo on 1.6 works best for me.

Fazziebear said:
Ps the best keyboard will be this one......
http://www.androidpolice.com/2010/0...-phones-screen-even-with-no-keyboard-present/
Hopefully!
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Its a good idea that and swype would be handy yet i prefer the 1.6 keyboard my only issue is that it isnt multi touch. Which cause me to make errors so for the time being its swype maybe not as fast but hey its effortless.

I use SLIDE IT has more features than SWYPE

Just to balance the argument a bit - I much prefer the 2.1 keyboard to the 1.6 version.
I have big fingers and my accuracy has improved enormously -I haven't even bothered re installing swype.
So i guess it is all down to personal preference.

I prefer the old one....just cause it had the FN key shown and also the arrows that are useful when i want to go back in typing.
I also agree with those who tell that the new one is not accuracy like in 1.6, i noticed that when i type delete it often type "L" letter. For this i would like to ask if the re-calibration may work....

Enabling Swype Keyboard
Fazziebear said:
The original keyboard was rubbish, agreat idea but impossible to type accurately. The new keyboard is better but still not great. Swype is be rest so far even as a touch type.
Ps to get keyboards to work (ie instead of the default), first enable it in the settings then hold you finger in any typing box until the options appear then choose input, then chose desired keyboard.
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
I have installed swype, but it isn't listed as an input option. Where do I find the settings menu to "enable" swype? It's not in the main settings menu. Thanks!

enne91 said:
I prefer the old one....just cause it had the FN key shown and also the arrows that are useful when i want to go back in typing.
I also agree with those who tell that the new one is not accuracy like in 1.6, i noticed that when i type delete it often type "L" letter. For this i would like to ask if the re-calibration may work....
Click to expand...
Click to collapse
The new keyboard is just terrible. Nearly eVERY word I type theres a mistake and it's slow and cannot keep up with the original.
I also noticed the keyboard is TOO LOW and that is why I'm making mistakes, the old keyboard was higher and in line with the fingers, therefore easier and I miss the NUMPAD!!!

STraver said:
I have installed swype, but it isn't listed as an input option. Where do I find the settings menu to "enable" swype? It's not in the main settings menu. Thanks!
Click to expand...
Click to collapse
When you go to send a text message, in the box where the cursor is and where you type, hold it for a second and it should give you the option to choose a different keyboard.

Horrible keyboard in 2.1
Guys i want 1.6 keyboard i prefer much better than 2.1. any way to get it?

enne91 said:
I prefer the old one....just cause it had the FN key shown and also the arrows that are useful when i want to go back in typing.
I also agree with those who tell that the new one is not accuracy like in 1.6, i noticed that when i type delete it often type "L" letter. For this i would like to ask if the re-calibration may work....
Click to expand...
Click to collapse
Totally agree with the arrows and the FN key is a most

editing text in an input field

I am new to Android and loving my Aria so far. The only thing that is really bugging me is the text input. I am having a little separation anxiety from my keyboard and it seems like I must be missing something. First I am using the swype keyboard but I don't think that is related to my question.
When you enter text into any input, say the body of an email in the gmail app, is there an easy way to go back and edit that text? I often find myself tapping 5 or 6 times to try to get the cursor back to the exact place that I need to edit and it gets really frustrating? On the iPhone when you want to edit text a search window pops up where your finger is and you can slide it back and forth to find the exact spot that you are looking for. Is there anything like this for Android?
Thanks for any feedback.
cj

Slide your finger over the little track pad between the menu and back button at the bottom of the phone. (Its the small silver circle). I think some people think that is the microphone but its not.

Ki77erB said:
Slide your finger over the little track pad between the menu and back button at the bottom of the phone. (Its the small silver circle). I think some people think that is the microphone but its not.
Click to expand...
Click to collapse
Aaah. I did know that was an optical input but I did not even think of it. I rarely use it since scrolling and selecting is so easy.
Thanks,
cj

chrisjaffe said:
I am new to Android and loving my Aria so far. The only thing that is really bugging me is the text input. I am having a little separation anxiety from my keyboard and it seems like I must be missing something. First I am using the swype keyboard but I don't think that is related to my question.
When you enter text into any input, say the body of an email in the gmail app, is there an easy way to go back and edit that text? I often find myself tapping 5 or 6 times to try to get the cursor back to the exact place that I need to edit and it gets really frustrating? On the iPhone when you want to edit text a search window pops up where your finger is and you can slide it back and forth to find the exact spot that you are looking for. Is there anything like this for Android?
Thanks for any feedback.
cj
Click to expand...
Click to collapse
Yes i hate trying to get the cursor back to edit a word glad someone asked
never thought about using the trackball sure makes things lot easier

Optical TrackPad FTW!
Sent from my Liberty using XDA App

Even better than the optical trackpad, Smart Keyboard has an arrow layout option that let's you navigate text way faster. The board is real nice too.

[Q] Move Cursor in Browser or Text Window?

Ok, this is going to probably sound really dumb, but it's driving me nuts.
I've used Android for a few years now, and I've never sorted out if there's a way to scroll left and right in a text area.
No matter what keyboard I've used, I just end up deleting the whole dang thing, and typing from scratch, if it's text in a small window.
For example, if I typed a long url, and I realized after hitting enter that I must have made a typo. I'd like to go left to right in that bar and look for it easily.
I guess this has plagued me on every Apple and Android device I've owned. On RIM it was easy enough, and on older Symbian it was fine.
What the heck am I missing here?
Thanks!

Tap anywhere on the entered text - wait - there will be a blue arrow cursor below the text. Drag it whenever you want to start typing from.
/thread

Fatal1ty_18_RUS said:
Type anywhere on the entered text - wait - there will be a blue arrow cursor below the text. Drag it whenever you want to start typing from.
/thread
Click to expand...
Click to collapse
Nifty. That works in the URL bar, but what about other input areas?
I can't seem to make that work in say the google search input window.

bladebarrier said:
Nifty. That works in the URL bar, but what about other input areas?
I can't seem to make that work in say the google search input window.
Click to expand...
Click to collapse
Works for me.

Fatal1ty_18_RUS said:
Works for me.
Click to expand...
Click to collapse
Ah, it's a Firefox issue then. I tried chrome and it works in that (though I never really use chrome).
Ok thanks.
I was hoping there would be a convenient left and right key option on the keyboard itself, so that it wouldn't matter what app I'm using, but I guess it's tied to the app itself. That kind of stinks. It's rather awkward in design.
Do you know of an alternative keyboard that supports that type of functionality? I like the "Swpe-like" setup in the stock keyboard, but I'd much rather have an easier correction method built in.

You can enable the function to move the cursor using the volume rocker. It's in Settings - Language and Input - and that option will be down below the input methods
I miss the big keyboard with arrows from HTC Flyer though - it's pretty awesome to use in portrait mode, though not as useful in landscape since it takes much more space than N7's does
And no, I don't know about other keyboard since I don't use them, I prefer stock

Fatal1ty_18_RUS said:
You can enable the function to move the cursor using the volume rocker. It's in Settings - Language and Input - and that option will be down below the input methods
I miss the big keyboard with arrows from HTC Flyer though - it's pretty awesome to use in portrait mode, though not as useful in landscape since it takes much more space than N7's does
And no, I don't know about other keyboard since I don't use them, I prefer stock
Click to expand...
Click to collapse
Excellent. That will work just fine.
Thanks a bunch for your help!