Hello all... I'm confused by the HDMI capabilities of my Evo. I'm under the impression that when you connect the micro HDMI cable (I just bought), you're able to view your phone's screen on your TV--as thought it were a large monitor. I thought this is what "mirroring" meant.
All I can see with this micrHDMI cable are videos, slideshows and photos--all pointless activities to the way I use my phone, oh! and play a video game or two, which I don't do. I installed two HDMI apps--the only two that I found on the market. The only thing I have not done is flash a different kernel.
Before I flash another kernel, do I have the wrong idea about what mirroring means?
semperlux said:
Hello all... I'm confused by the HDMI capabilities of my Evo. I'm under the impression that when you connect the micro HDMI cable (I just bought), you're able to view your phone's screen on your TV--as thought it were a large monitor. I thought this is what "mirroring" meant.
All I can see with this micrHDMI cable are videos, slideshows and photos--all pointless activities to the way I use my phone, oh! and play a video game or two, which I don't do. I installed two HDMI apps--the only two that I found on the market. The only thing I have not done is flash a different kernel.
Before I flash another kernel, do I have the wrong idea about what mirroring means?
Click to expand...
Click to collapse
No, you don't have the wrong idea. The evo's native HDMI capabilities will only allow you to see certain things on the tv screen, such as youtube, streaming video, the gallery app, etc (as you already noted). There are two apps in the market, both of which I've had success with. Those apps (fullhdmi and hdmwin) both allow you to mirror whatever is on your evo's screen to the tv. Anything on your phone's screen will be mirrored to the tv you have it connected to. I havent used either of the two apps in a month or so actually, but I thought that a custom kernel was no longer required to use either one of them? (although a custom kernel did make things seem a bit smoother, as I believe it enabled hardware acceleration)
So in short, you don't have the wrong idea, and you are indeed able to do what you have set out to do.
EDIT: I just noticed that you said you have intalled both of the hdmi apps on to your phone. I would suggest uninstalling one of them, as they could interfere with eachother. Decide which one you want to use, and then uninstall the other one and reboot your phone, then try it.
k2buckley said:
No, you don't have the wrong idea. The evo's native HDMI capabilities will only allow you to see certain things on the tv screen, such as youtube, streaming video, the gallery app, etc (as you already noted). There are two apps in the market, both of which I've had success with. Those apps (fullhdmi and hdmwin) both allow you to mirror whatever is on your evo's screen to the tv. Anything on your phone's screen will be mirrored to the tv you have it connected to. I havent used either of the two apps in a month or so actually, but I thought that a custom kernel was no longer required to use either one of them? (although a custom kernel did make things seem a bit smoother, as I believe it enabled hardware acceleration)
So in short, you don't have the wrong idea, and you are indeed able to do what you have set out to do.
EDIT: I just noticed that you said you have intalled both of the hdmi apps on to your phone. I would suggest uninstalling one of them, as they could interfere with eachother. Decide which one you want to use, and then uninstall the other one and reboot your phone, then try it.
Click to expand...
Click to collapse
As always, k2buckley is on point. Please note that for the best results, a custom kernel (check my sig for the one I'm using) is better because it will allow the app to work better by allowing certain features and output resolutions to work that will not work without the custom kernel. I use the mirroring feature frequently, so for me it is worth having the custom kernel.
k2buckley said:
EDIT: I just noticed that you said you have intalled both of the hdmi apps on to your phone. I would suggest uninstalling one of them, as they could interfere with eachother. Decide which one you want to use, and then uninstall the other one and reboot your phone, then try it.
Click to expand...
Click to collapse
Thank you for your prompt response. Could the problem also be in my TV settings?
This is what I did (Using a 52" Panasonic plasma - w/Vieracast):
1) Installed the app. (Full HDMI by Team Win, uninstalled. Installed FuLLHDMI by orrebmas)
2) plugged everything in (HDMI to HDMI1 port on my tv and micro to the Evo)
3) Selected the input to HDMI1 (using my remote).
4) Results, *Black screen* I didn't see anything until I produced the Gallery, YouTube or videos on my phone which now I'm learning are default.
Other than flashing a custom kernel, I can't imagine what else you'd need to do.
semperlux said:
Thank you for your prompt response. Could the problem also be in my TV settings?
This is what I did (Using a 52" Panasonic plasma - w/Vieracast):
1) Installed the app. (Full HDMI by Team Win, uninstalled. Installed FuLLHDMI by orrebmas)
2) plugged everything in (HDMI to HDMI1 port on my tv and micro to the Evo)
3) Selected the input to HDMI1 (using my remote).
4) Results, *Black screen* I didn't see anything until I produced the Gallery, YouTube or videos on my phone which now I'm learning are default.
Other than flashing a custom kernel, I can't imagine what else you'd need to do.
Click to expand...
Click to collapse
Did you open up the FullHDMI app, and click the button that says 'apply and start mirroring' or something to that nature? It doesn't sound like you started the actual app. And if you don't start the app, it reverts to the phone's default capabilitites. Once you start the app, and hit the button that says start mirroring, it should start. If it won't display, you may need to change the output resolution. I believe there were 4 or 5 settings in the app. On my TV, which is a 50" Samsung, only 2 of the settings would work. All of the other settings, my tv would say something like 'format not supported'. I had to mess around for a couple minutes, but was able to get it to work. And it worked rather nicely as well, once I got it going.
You can find trouble shooting tips and even live support via chat on the FullHDMI website here:
http://members.cox.net/lokifish/index.html
As buckley said, once you connect the HDMI cable from your phone to the TV, you need to hit the button that says "Start FullHDMI Service". If you get a black screen, hit the second tab and make sure the resolution is not set to 720p (unless you have the custom kernel). Also, please note that 800x600 is a resolution for computers and not supported by all TV's, so you may want to try PAL or EDTV if you get a black screen. Once you change the resolution, go back to the main tab and hit the start button again. Since it is already running, it will say "Reapply Service" or something like that.
There are many more trouble shooting tips on the site asides from what I mentioned above. I suggest you check it out. Lokifish is pretty good about being on the chat server, so chances are you can get live help there, as well.
Ok, there we go... it's working. The setting my TV will let me use is EDTV. Thanks everyone for all your help.
Now back to stock YouTube
will not work. I have tried disabling HDMwin service already without success.
Also tried uninstalling stock onboard YouTube and re-installing it.
If I disable HDMWin service, shouldn't this be all I need to do in order
to use onboard YouTube without mirroring it?
jdub1234 said:
will not work. I have tried disabling HDMwin service already without success.
Also tried uninstalling stock onboard YouTube and re-installing it.
If I disable HDMWin service, shouldn't this be all I need to do in order
to use onboard YouTube without mirroring it?
Click to expand...
Click to collapse
If you're on a Sense rom, the YouTube app should work with the native HDMI capabilities of the Evo. If you're on an AOSP rom, you will have no native HDMI capabilities, and the only way for HDMI to work is with one of the two available apps in the market. If you are on a sense rom, and it's still not working, there could be a few things causing your problem. Such as a bad HDMI cable, a bad HDMI port, or the particular kernel you're on may not support HDMI output.
On on a Sense ROM
Netarchy.
The native HDMI worked prior to flashing Netarchy so I know it's ok.
One thing kind of odd that I noticed with the native YouTube before I
re-installed it. The search function stopped working for some reason.
I have no idea why. So, I uninstalled the native YouTube, re-installed
a new one and the search function is back. I now also have two YouTube
icons, only one of which works.
I have yet to try the new native YouTube for HDMI and will do that today.
I also tried dragging the "old" Youtbube icon off the desktop but it won't
disappear.
Related
WiMi
Basic Wireless Mirroring for Android
Intro
There have been times when it would have been useful to output an email, website and other file on my phone to a public monitor or display. There have been various ways of doing this over the years, the TV Out function on the old Touch Pro devices, DLNA streaming, and HDMI ports. But, so far I have not found a way to directly replicate the screen, (mirroring) without the use of wires.
I have seen many threads from people who have asked this same question, and each time they have been told it's not possible, for various reasons. This project is to explore ways in which, however crudely to begin with, we can make this happen, and I have written a short brief below of why I believe it may now be possible. I am asking for help from anybody who thinks this may be achievable, or has something to offer that may help us in any way.
Theory
To create basic DLNA mirroring of your Android device for low frame-rate applications such as mail, browsing, and others. It is important to realize that it is highly unlikely to be able to create full DLNA mirroring for applications such as games using the proposed method, but who knows what can happen?
The basic mechanism would be to take continuous screen captures, between 1 and 30 per second, compress the screen captures into a suitable file format that can then be transmitted via DLNA.
I believe this should be possible - I have read that the new Sensation Camera App can record natively in MP4, in HD, in real time, which is fantastic, because as I understand it, MP4 works perfectly with DLNA. I have also noticed that in recent versions of Android, (I think FoYo+) there are parameters for ScreenCapture.
There may be a large lag using this method, but it is a start, and for showing a web page, text conversation, book, or text message, wirelessly on another display, it shouldn't be too much of a problem.
From what I understand, not all Kernels would be able to do this but I am unsure, so if anybody has any theories, let me know!
Suggested Basic Features
These are features that I think should be included as standard
1) Be able to predefine video bit-rate and frame rate via user controlled variable integers.
2) View the temp folder
3) Disable auto-orientation settings to prevent screen tearing.
Suggested Advanced Features
These suggested features are a kind of wish-list once we can get a basic app running well enough.
1) Direct camera monitoring - sending the image directly from the camera to the external display. (Probably resulting in BIG lag!)
2) Custom external screen resolution, possibly by upscaling to 720/1080 equivalent via screen density.
3) Ability to kill screen backlight, but keep capacitive control for scrolling web pages etc.
4) Output file to SD card for archiving.
5) Switch audio between device and external screen.
6) A "Start / Stop" widget.
7) Enable notification bar settings access.
If you want this concept to work, think you can help in any way, have an opinion or have anything to contribute at all, get involved!
News
I have made a blank app with the essential UI components.
IT DOES NOT HAVE ANY FUNCTIONALITY YET, IT IS JUST A DUMMY!!!!!!
Download it HERE and tell me what you think so far.
If anybody thinks they can help with the core of the app, please get in touch!
I love the idea
Sent from my HTC Vision using XDA App
Same here.
The first thing I see when the Mojo boots up is a message to the tune of change your device resolution. I'm not at all a developer, nor am I well versed in using an android device. I own one cheap Chinese tablet, dragon touch or something similar. Can do the basics, but I mostly use it as a reader. Of course I have a phone, but again I've never gone out of my way to use it for more than a phone. I'm fairly acquainted with Linux so my nephew has turned to me to help him with this. I've the male to male on order to root the system, but I doubt that's much to do with the problem. We have a hard time navigating with certain apps due to the resolution cut off, but mostly not seeing complete gauges in games kind of makes a game machine...a bit crap to say it lightly. For the money one should expect more. I can't find any solution in the setting. When I plug my tablet into my television it handles it with a secondary display GUI popping up and allowing me to choose the setting. Given the Mad Catz is using the TV as it's primary display I wouldn't suppose there'd be a clever way to trick it into thinking the TV is a secondary display? Just the only thing I could come up with I'm not married to the idea. If yous guys know how to help me that'd be great. bonus if this can be taken care of with out getting into terminal, or the android equivalent. Thanks buds.
Oh also, in the mean time while I wait on my cable. Is there a way to install games you've bought on Google Play manually through a usb stick?
Marchegiano said:
due to the resolution cut off
Click to expand...
Click to collapse
Do you mean an overscan issue?
http://forum.xda-developers.com/showthread.php?t=2629396
Basically, you have to google your TV's make model and find how to turn oversan off.
When I use the MOJO on a PC monitor.. the resolutions drops to something like 320x320.. not sure why.. but I remove the HDMI cable, let the MOJO boot up then I plug the HDMI cable in and it's a 1024.
Marchegiano said:
Oh also, in the mean time while I wait on my cable. Is there a way to install games you've bought on Google Play manually through a usb stick?
Click to expand...
Click to collapse
For free apps, install a google store alternative, ie:
http://joyofandroid.com/24-android-app-store-alternatives-for-those-who-hate-google-play/
I used Aptoide before rooting.
For paid apps, you could try backing up the apk on another device and sideload it on the MOJO.
I wouldn't bother doing either, just wait and root it.
thanks bud
gwaldo said:
Do you mean an overscan....
Click to expand...
Click to collapse
bingo jingo bud, thanks a bunch.
gwaldo said:
Do you mean an overscan issue?
http://forum.xda-developers.com/showthread.php?t=2629396
Basically, you have to google your TV's make model and find how to turn oversan off.
Click to expand...
Click to collapse
Thank you! This is exactly what I needed.
Some televisions will adjust the picture of M.O.J.O. so that the edges are off screen. To change this, you should check the settings menus of your television and look for Aspect Ratio or Zoom options. Every television is different so the exact method for adjusting will differ from model to model. However, if there's a Zoom level option then setting that to 'Full' should solve it. Alternatively, if it's an Aspect Ratio menu then 'Scan Only' is the option to select.
Be sure to update the firmware on M.O.J.O. if you haven't already. The firmware update introduces a modification to the way Google identifies the M.O.J.O. hardware which allows for many, many more games to be listed and downloadable in the Google Play Store. This modification makes it so you don't have to root the device anymore, unless you want to for the other typical customization benefits that root access allows. Rooting won't void your warranty.
If you went through our "Getting Started" walkthrough, you can use "ES File Manager" for accessing any files stored in your Download folder or on a USB.
Feel free to move this thread, but I thought I should ask somewhere people know about hardware.
I own a local store which has about 35 stands for each product, and me and my team want to run slideshows (picture+video) in each one.
My guess is that I should use tablets.
Why tablets?
a) Slideshows needs a software to run them. Displays are just displays.
b) KODI (XBMC) app is a good option, as each Kodi would also run a Samba server and I could send the media I need to play to each one from one computer.
c) I looked for digital photo frames, but they don't support any kind of networking, and the few ones I've found are as expensive as tablets.
My questions are,
1) Is it fine if they are connected to AC power all day 24/7? Our local is opened 24hs. Should I take off their batteries? I don't know if tablets are prepared for that purpose.
2) Is there a difference between generic tablets and Samsung Galaxy Tabs 3? In fact, I really don't need high-end tablets, I just need to run the slideshows. But my only fear is the device-life.
When its plugged in it runs off ac power an keeps the battery's charged so as long as there is power you are good it won't hurt it. I can make a app that's a slide show for them if you want just install the app an open it an itll play. The send the videos an slide show pics an I'll work on when I can. 12 hour shifts this schedule
afox27 said:
When its plugged in it runs off ac power an keeps the battery's charged so as long as there is power you are good it won't hurt it. I can make a app that's a slide show for them if you want just install the app an open it an itll play. The send the videos an slide show pics an I'll work on when I can. 12 hour shifts this schedule
Click to expand...
Click to collapse
I appreciate your help.
I actually found out a solution to this. Not the best but fine.
I've installed Kodi and configured everything to block everything but the slideshow.
I needed to rooted them. Installed Xposed framework, and a Xposed addon to blocked hardware keys (leaving a combination to escape).
Installed Touch Blocker, to disable touch.
Installed Samba Filesharing app (running on default samba port thanks to root)
Configure Kodi to autostart Slideshow when it opens, and made a custom service-addon to auto refresh slideshow when new media is detected after 2 minutes, skipping if files are still transferring.
That took a lot more time to replicate in all 35 tablets because there is no cmw or teamwin recovery for Galaxy Tab 4 8'', or at least I haven't found, so Titanium Backup and Helium for some other stuff
I was lucky enough to purchase a rootable Amazon Fire TV and have customized it to be quite the awesome device, thanks in part to the wonderful XDA community for providing all sorts of hacks. I wanted to show off what this little device can do so here is a video showing my setup, including the hardware I use and all the customizations I've done.
https://www.youtube.com/watch?v=v1nf2ffZT3s
HARDWARE
-----------------------------------
First off, I want to discuss hardware. Here is what I have connected to my FTV.
Insignia Powered USB HUB
(http://www.insigniaproducts.com/products/computer-speakers-accessories/NS-PCH5431.html) - Without a powered USB, I wouldn't be able to do much. This one was cheap at Best Buy and is working flawlessly.
Logitech K700 Wireless Keyboard (http://www.amazon.com/Logitech-Wireless-Keyboard-Controller-Google/dp/B004VD4F1W) - I bought this several years ago to use with my old HTPC. It works well with the FTV, but not all the buttons function as it was designed for the Google TV. The keyboard itself works great, as does the trackpad and the navigation controls. This does function in CWM to, so I don't need a wired keyboard.
Motorola Bluetooth Mouse - Just a simple BT mouse that works.
Logitech F710 Game Controller (http://gaming.logitech.com/en-us/product/f710-wireless-gamepad) - I've had this for use on my PC games, but it works well for the FTV. More about game controllers below.
Ouya Game Controller (http://shop.ouya.tv/products/ouya-controller) - This works well with the FTV, both as a controller and as a touchpad. More about game controllers below.
MODIFICATIONS
-----------------------------------
I followed many guides on http://www.aftvnews.com/ to modify my FTV and get it to do what I wanted. Here are a few. I won't go into details about them, you can get that on AFTVNews. But I wanted to list what I've done.
Root (http://www.aftvnews.com/how-to-root-the-amazon-fire-tv/)
Custom Boot Menu (http://www.aftvnews.com/how-to-install-a-kernel-boot-menu-on-the-amazon-fire-tv/)
ClockworkMod (http://www.aftvnews.com/recovery/)
Pre-Rooted Stock Update (http://www.aftvnews.com/roms/)
Customized Menu Items (http://www.aftvnews.com/menu-item-remover-mod-updated-with-51-1-4-0-compatibility/)
Mount System and Data to USB Drive (http://www.aftvnews.com/how-to-use-a-usb-drive-as-the-fire-tvs-internal-storage/) - This was a must for me. Once I was able to have virtually unlimited memory, it allowed all the customizations and extras to happen.
APPLICATIONS
-----------------------------------
SPMC [XBMC/KODI] (https://play.google.com/store/apps/details?id=com.semperpax.spmc&hl=en) - An awesome media player with tons of addons. There is plenty of discussion over this on the XDA forums.
Google Play Store Install (http://www.aftvnews.com/how-to-install-the-google-play-store-on-the-amazon-fire-tv/)
Google Plays All Apps! (http://www.aftvnews.com/how-to-trick-google-play-store-into-allowing-all-apps/) - Make the FTV more compatible with apps on Google Play
OUYA Framework (http://www.reddit.com/r/ouya/comments/2d6byk/turn_any_device_into_an_ouya_tutorial/) - Turn your FTV into an OUYA.... sort of. Once installed, this sort of messes up the home button, taking you to a messed up OUYA system screen instead of the Amazon Launcher. I found a work around to allow the OUYA games to still function, but not mess up the system. Install this alternative OUYA launcher then disable the OUYA Launcher using Titanum Backup. (http://ouyaforum.com/showthread.php?4436-BAXY-Custom-Launcher).
NOVA Launcher (https://play.google.com/store/apps/details?id=com.teslacoilsw.launcher&hl=en) - My launcher of choice. It works well with the remote.
Wallpaper (http://forum.xda-developers.com/fire-tv/themes-apps/background-t3029985) - The FTV has system wallpaper turned off, making most custom launchers only have a black background. This hack turns it on.
ISSUES
-----------------------------------
Game controllers - The short, not all controllers work with all games. This is a hit or miss area with some buttons not working on certain games. One issue I did find was that having my keyboard connected seems to mess up certain games. For example, Shadowngun. When it's connected, the L2 and R2 buttons do not work on either of my controllers. I do not know if this would be the same with the Amazon Controller. If I unplug it and reboot, the L2 and R2 works. My suggestion, if you have a wireless keyboard, test games without it plugged in first. A BT keyboard might not have this issue though.
OUYA - Having the OUYA framework is wonderful for increasing the available games. It's downfall is that it screws up the home button functionality. A work around is to disable the OUYA Launcher using Titanium Backup, and have the alternative OUYA Launcher (BAXY) installed. This gives games access to the OUYA framework without screwing with the default launcher.
I hope this helps people see the capabilities of the Fire TV and unlocks it for those lucky enough to have a rootable FTV. My future goals are to mess with the game controllers to see if I can figure out why some games work and others don't. I want to get an Amazon controller and see how that works with the OUYA framework. unfortunately they're on backorder at the moment.
Lots of useless junk too. You even point to the fact that a lot of the games you have installed do not work, so why not uninstall them? It just seems like your setup is over doing it. Not tryin to be rude just stating my opinion. The thread is good and I like that you would point people to where they can find tweaks, but the video is horrible.
xm41907 said:
I was lucky enough to purchase a rootable Amazon Fire TV and have customized it to be quite the awesome device, thanks in part to the wonderful XDA community for providing all sorts of hacks. I wanted to show off what this little device can do so here is a video showing my setup, including the hardware I use and all the customizations I've done.
https://www.youtube.com/watch?v=v1nf2ffZT3s
HARDWARE
-----------------------------------
First off, I want to discuss hardware. Here is what I have connected to my FTV.
Insignia Powered USB HUB
(http://www.insigniaproducts.com/products/computer-speakers-accessories/NS-PCH5431.html) - Without a powered USB, I wouldn't be able to do much. This one was cheap at Best Buy and is working flawlessly.
Logitech K700 Wireless Keyboard (http://www.amazon.com/Logitech-Wireless-Keyboard-Controller-Google/dp/B004VD4F1W) - I bought this several years ago to use with my old HTPC. It works well with the FTV, but not all the buttons function as it was designed for the Google TV. The keyboard itself works great, as does the trackpad and the navigation controls. This does function in CWM to, so I don't need a wired keyboard.
Motorola Bluetooth Mouse - Just a simple BT mouse that works.
Logitech F710 Game Controller (http://gaming.logitech.com/en-us/product/f710-wireless-gamepad) - I've had this for use on my PC games, but it works well for the FTV. More about game controllers below.
Ouya Game Controller (http://shop.ouya.tv/products/ouya-controller) - This works well with the FTV, both as a controller and as a touchpad. More about game controllers below.
MODIFICATIONS
-----------------------------------
I followed many guides on http://www.aftvnews.com/ to modify my FTV and get it to do what I wanted. Here are a few. I won't go into details about them, you can get that on AFTVNews. But I wanted to list what I've done.
Root (http://www.aftvnews.com/how-to-root-the-amazon-fire-tv/)
Custom Boot Menu (http://www.aftvnews.com/how-to-install-a-kernel-boot-menu-on-the-amazon-fire-tv/)
ClockworkMod (http://www.aftvnews.com/recovery/)
Pre-Rooted Stock Update (http://www.aftvnews.com/roms/)
Customized Menu Items (http://www.aftvnews.com/menu-item-remover-mod-updated-with-51-1-4-0-compatibility/)
Mount System and Data to USB Drive (http://www.aftvnews.com/how-to-use-a-usb-drive-as-the-fire-tvs-internal-storage/) - This was a must for me. Once I was able to have virtually unlimited memory, it allowed all the customizations and extras to happen.
APPLICATIONS
-----------------------------------
SPMC [XBMC/KODI] (https://play.google.com/store/apps/details?id=com.semperpax.spmc&hl=en) - An awesome media player with tons of addons. There is plenty of discussion over this on the XDA forums.
Google Play Store Install (http://www.aftvnews.com/how-to-install-the-google-play-store-on-the-amazon-fire-tv/)
Google Plays All Apps! (http://www.aftvnews.com/how-to-trick-google-play-store-into-allowing-all-apps/) - Make the FTV more compatible with apps on Google Play
OUYA Framework (http://www.reddit.com/r/ouya/comments/2d6byk/turn_any_device_into_an_ouya_tutorial/) - Turn your FTV into an OUYA.... sort of. Once installed, this sort of messes up the home button, taking you to a messed up OUYA system screen instead of the Amazon Launcher. I found a work around to allow the OUYA games to still function, but not mess up the system. Install this alternative OUYA launcher then disable the OUYA Launcher using Titanum Backup. (http://ouyaforum.com/showthread.php?4436-BAXY-Custom-Launcher).
NOVA Launcher (https://play.google.com/store/apps/details?id=com.teslacoilsw.launcher&hl=en) - My launcher of choice. It works well with the remote.
Wallpaper (http://forum.xda-developers.com/fire-tv/themes-apps/background-t3029985) - The FTV has system wallpaper turned off, making most custom launchers only have a black background. This hack turns it on.
ISSUES
-----------------------------------
Game controllers - The short, not all controllers work with all games. This is a hit or miss area with some buttons not working on certain games. One issue I did find was that having my keyboard connected seems to mess up certain games. For example, Shadowngun. When it's connected, the L2 and R2 buttons do not work on either of my controllers. I do not know if this would be the same with the Amazon Controller. If I unplug it and reboot, the L2 and R2 works. My suggestion, if you have a wireless keyboard, test games without it plugged in first. A BT keyboard might not have this issue though.
OUYA - Having the OUYA framework is wonderful for increasing the available games. It's downfall is that it screws up the home button functionality. A work around is to disable the OUYA Launcher using Titanium Backup, and have the alternative OUYA Launcher (BAXY) installed. This gives games access to the OUYA framework without screwing with the default launcher.
I hope this helps people see the capabilities of the Fire TV and unlocks it for those lucky enough to have a rootable FTV. My future goals are to mess with the game controllers to see if I can figure out why some games work and others don't. I want to get an Amazon controller and see how that works with the OUYA framework. unfortunately they're on backorder at the moment.
Click to expand...
Click to collapse
Well I really liked it and I envy that screen! It looks pretty clear even from the camera.
Just 2 random things I noticed...I used nova launcher with xposed but probably wouldn't have reverted back if I got it looking the way you did. I played around with it on my phone awhile until I tried Google now with a few exposed tweaks. But I'm always on the lookout for a good launcher. Lots of people using nova but haven't found many good tutorials.
The other was fast reboot. I had this installed but the one persistent bug I have dealing with cec wasn't fixed by fast reboot. It needed an actual reboot. Then I read that those types of apps aren't always good for android. They included other "memory boosting" type apps as well. It didn't scare me but since it didn't help much I just uninstalled it. Then again, at the time I wasn't using a launcher so getting to the app was too tedious to make it worthwhile. Do you have any thoughts on that? Heard it might not be good for the device?
I enjoyed the video. Very impressive setup! Thanks for sharing!
porkenhimer said:
Lots of useless junk too. You even point to the fact that a lot of the games you have installed do not work, so why not uninstall them? It just seems like your setup is over doing it. Not tryin to be rude just stating my opinion. The thread is good and I like that you would point people to where they can find tweaks, but the video is horrible.
Click to expand...
Click to collapse
That is because many of them I have not tested out yet to see which work well and which do not. Sort of a mass install of games over the last two weeks and I've not had the time to sort through them all. Many will be uninstalled I'm sure, but frankly, that doesn't concern me at this point. They don't take up resources beyond hard drive space and I have 320 gigs worth. I've not even touched 10% of available space yet. The point of the video is to show what the FTV is capable of, not to show a well polished and final system.
The video isn't great because I'm on a projector, lighting is difficult. Too much light and the screen is washed out. Too little and the camera sensor suffers.
KLit75 said:
Well I really liked it and I envy that screen! It looks pretty clear even from the camera.
Just 2 random things I noticed...I used nova launcher with xposed but probably wouldn't have reverted back if I got it looking the way you did. I played around with it on my phone awhile until I tried Google now with a few exposed tweaks. But I'm always on the lookout for a good launcher. Lots of people using nova but haven't found many good tutorials.
The other was fast reboot. I had this installed but the one persistent bug I have dealing with cec wasn't fixed by fast reboot. It needed an actual reboot. Then I read that those types of apps aren't always good for android. They included other "memory boosting" type apps as well. It didn't scare me but since it didn't help much I just uninstalled it. Then again, at the time I wasn't using a launcher so getting to the app was too tedious to make it worthwhile. Do you have any thoughts on that? Heard it might not be good for the device?
I enjoyed the video. Very impressive setup! Thanks for sharing!
Click to expand...
Click to collapse
Thanks for the support. I've been using both NOVA Launcher and Fast Reboot for about three years now and on multiple devices. I like how simple NOVA can be, yet is very customizable. Having it work well with the FTV remote was a big reason I went with it though. A more graphically pleasing look would be nice, but this does what I want it to do. I've read up a lot on the various memory clearing apps. Fast Reboot is simple and doesn't muck around in the weeds. I've been nothing short of happy with using it for several years now. It doesn't fall into the "memory boosting" apps, that try to tweak the system. Simply a quick way to clear memory cache.
xm41907 said:
That is because many of them I have not tested out yet to see which work well and which do not. Sort of a mass install of games over the last two weeks and I've not had the time to sort through them all. Many will be uninstalled I'm sure, but frankly, that doesn't concern me at this point. They don't take up resources beyond hard drive space and I have 320 gigs worth. I've not even touched 10% of available space yet. The point of the video is to show what the FTV is capable of, not to show a well polished and final system.
The video isn't great because I'm on a projector, lighting is difficult. Too much light and the screen is washed out. Too little and the camera sensor suffers.
Click to expand...
Click to collapse
I was not talking about the quality of the video, I meant that the video in general was horrible. The video capures what a lot of people do wrong when they post video of their devices. For one, you have too much going on in the video. If you wanna show us your setup, fine, but why do you have to show us every gadget you have? I for one think people that post videos about their device and for no reason show us 20 other devices are laughable. It takes away from what you are supposed to be showing us. Plus you have a lot of apps that you make no mention of. Like when you open up your utilities folder, you show the folder and do not say the names of any apps inside or what you have them installled for. I am not trying to say you did a bad job, cause like I said, the thread is nice, maybe you could go through your apps and tell us what they are and why you have them. You opened some games and showed off your launchers, but you should have gave us some more info on what your installed apps are. I will use the utilities folder as an example again, I like utility apps so I am sure others do too, but you have an awful lot of utility apps to not give us a simple rundown of what some of them are. Its different if you have a folder full of games that we can identify by looking at the icon, but when you have a folder full of apps that we cannot recognise then you should give us some input. Also, not everyone uses their Fire TV to play games or play with XBMC, so maybe you could show us something else besides launchers, SPMC and gaming. You have the important stuff listed on this thread, which is awesome, so you probably could have just made a video sayin to visit your thread for all info on the mods you have installed, maybe even showed them off a little, then got to the other less graphical non cool type of apps you have installed. Like I said its just an opinion, but the video really did seem like it was for show and nothing technical. Maybe you can make a part two and show us some of the other apps you have, and tell us what they do. People are into discovering new apps so maybe you can help someone discover something new besides something media or graphic driven. The video kinda reminds me of the unboxing videos where someone spends more time focusing on the cool accesories they have rather than the device itself.
porkenhimer said:
For one, you have too much going on in the video. If you wanna show us your setup, fine, but why do you have to show us every gadget you have? I for one think people that post videos about their device and for no reason show us 20 other devices are laughable. It takes away from what you are supposed to be showing us. Plus you have a lot of apps that you make no mention of. Like when you open up your utilities folder, you show the folder and do not say the names of any apps inside or what you have them installled for
Click to expand...
Click to collapse
I humbly disagree with your take on my video. My intention was to show you what modifications I have done with my system and I did just that. The specific devices I have are key to these modifications. I will give you that showing both a bluetooth mouse and a wireless keyboard/trackpad are slightly redundant, but if you're going to nitpick something like that, then just move on. I did not show every installed app, because again, it was to show you what modifications I have done, not to show you recommended apps I have installed. I believe you have completely missed the spirit of my post.
porkenhimer said:
You opened some games and showed off your launchers, but you should have gave us some more info on what your installed apps are. I will use the utilities folder as an example again, I like utility apps so I am sure others do too, but you have an awful lot of utility apps to not give us a simple rundown of what some of them are.
Click to expand...
Click to collapse
The vast majority of apps in my Utility folder are stock apps on the FTV that I put into the folder because I have no need for them. Such as the Game Circle, Superuser, etc. If you want a video of me explaining what apps I have, I can do that, but that does not fall in the spirit of my post. The apps I mentioned were the key apps necessary for my mods. Others are insignificant to the modifications.
porkenhimer said:
not everyone uses their Fire TV to play games or play with XBMC, so maybe you could show us something else besides launchers, SPMC and gaming.
Click to expand...
Click to collapse
Again, I did not post this for people to copy my setup, but to show functionality of mods.
porkenhimer said:
but the video really did seem like it was for show and nothing technical.
Click to expand...
Click to collapse
Correct. If I were making a tutorial video on how to accomplish these mods, then it would have been a totally different type of video. It was simply to show some of the mods that can be used on the FTV with a little bit of personal experience using them.
porkenhimer said:
Maybe you can make a part two and show us some of the other apps you have, and tell us what they do. People are into discovering new apps so maybe you can help someone discover something new besides something media or graphic driven. The video kinda reminds me of the unboxing videos where someone spends more time focusing on the cool accesories they have rather than the device itself.
Click to expand...
Click to collapse
I did spend a fair amount of time today weeding through the apps I have installed and maybe I will do an app video to accompany my setup. In a sense, you are right that this video is more of a unboxing video. My intention was to provide a glimpse into the modifications available for the FTV. A "modifications of" type of of unboxing video. I provided the links to many of the various modifications so that if someone wanted to achieve a function that I have, they would have the means to follow the tutorials that I followed.
Your setup is soooooo decent...thanks for the share!
Do I install Titanium and kill the AFTV launcher to use Nova as my main launcher? how do you go from Nova to Aftv back to Nova so easy? Now that i can do backgrounds I'll certainly like to use Nova instead of another custom one i'm using
nickyb003 said:
Your setup is soooooo decent...thanks for the share!
Do I install Titanium and kill the AFTV launcher to use Nova as my main launcher? how do you go from Nova to Aftv back to Nova so easy? Now that i can do backgrounds I'll certainly like to use Nova instead of another custom one i'm using
Click to expand...
Click to collapse
Honestly, it's been a little while so I don't recall exactly how I got it functioning. I was toying around with lots of things and stumbled upon getting it working. Here's what I believe got it to work right. There isn't a function to set NOVA as the default launcher like on most android devices. Instead, you have to do some fiddling. Here is basically what I did.
Installed FiredTV Launcher - I used this for awhile before using the Llama app
Installed Nova Launcher - Froze KFTV Launcher using TB. This worked but I lost Amazon movies
Froze FiredTV Launcher and unfroze KFTV. This seemed to do the trick. I also have the Ouya framework installed, but with the Ouya launcher frozen or else it takes over.
Thanks for the video. I had given up on FiredTV and never got any launcher working right but you showed it could be done, so I went looking and found my answer.
Through the Xposed framework, I loaded a module which intercepts the "home" key and lets you define a launcher. I still use the fire tv stock launcher when absolutely required, but I launch it from within nova and when I press Home, I'm back to Nova.
I wanted to ask you about the USB drive. I had a flash drive and used the hack to mount data (or whatever it was) to the flash drive. Everything was SLOW -- unbearably so. I have a USB hard drive coming, so wanted to ask if you find the speed acceptable with the hard drive. I believe some of the tweaks from tvaddons.ag for xbmc were actually part of the problem. I ended up just starting over at one point.
ractar28 said:
Thanks for the video. I had given up on FiredTV and never got any launcher working right but you showed it could be done, so I went looking and found my answer.
Through the Xposed framework, I loaded a module which intercepts the "home" key and lets you define a launcher. I still use the fire tv stock launcher when absolutely required, but I launch it from within nova and when I press Home, I'm back to Nova.
I wanted to ask you about the USB drive. I had a flash drive and used the hack to mount data (or whatever it was) to the flash drive. Everything was SLOW -- unbearably so. I have a USB hard drive coming, so wanted to ask if you find the speed acceptable with the hard drive. I believe some of the tweaks from tvaddons.ag for xbmc were actually part of the problem. I ended up just starting over at one point.
Click to expand...
Click to collapse
You're welcome! That is why I wanted to post a video and provide links. Are you refering to Rbox's Xposed module? I installed that too, but completely forgot about having it.
As for the flash drive, I tried one at first, it was horribly slow. Many others have had similar experiences. It's reference in one of the guides I posted. After switching to my external hard drive, it was just about as fast as stock. I was actually surprised, because my drive is a WD Passport, no external power supply. I simply used a powered hub and it works great. I would like an SSD, but not going to spend the money on one now.
The tweaks from tvaddons would only affect XBMC. They shouldn't have any affect on the FTV itself.
Yes, the addons only impacted kodi, BUT, kodi was the app I used the most at the time. I know kodi has a pretty small footprint for an android app, so for it to become painstakingly slow, pretty much ruined my fire tv experience. Of course, I was also using gotham "customizations" on kodi, which was also possibly a contributing factor.
Is a powered hub required for an external hard drive? I had purchased one powered hub and tried it with fire tv and it could no longer see my flash drive through the powered hub. With a powered hub, can the fire tv (via stickmount) see multiple storage devices?
ractar28 said:
Yes, the addons only impacted kodi, BUT, kodi was the app I used the most at the time. I know kodi has a pretty small footprint for an android app, so for it to become painstakingly slow, pretty much ruined my fire tv experience. Of course, I was also using gotham "customizations" on kodi, which was also possibly a contributing factor.
Click to expand...
Click to collapse
I still doubt it was anything with kodi. FLash drives are known to be very slow for this.
ractar28 said:
Is a powered hub required for an external hard drive? I had purchased one powered hub and tried it with fire tv and it could no longer see my flash drive through the powered hub. With a powered hub, can the fire tv (via stickmount) see multiple storage devices?
Click to expand...
Click to collapse
I first tried using it without a hub and the FTV didn't even register it was connected. Once I got a powered hub, all was well with the world. I just picked one up at Best Buy.
xm41907 said:
I was lucky enough to purchase a rootable Amazon Fire TV and have customized it to be quite the awesome device, thanks in part to the wonderful XDA community for providing all sorts of hacks. I wanted to show off what this little device can do so here is a video showing my setup, including the hardware I use and all the customizations I've done.
https://www.youtube.com/watch?v=v1nf2ffZT3s
I hope this helps people see the capabilities of the Fire TV and unlocks it for those lucky enough to have a rootable FTV. My future goals are to mess with the game controllers to see if I can figure out why some games work and others don't. I want to get an Amazon controller and see how that works with the OUYA framework. unfortunately they're on backorder at the moment.
Click to expand...
Click to collapse
im glad to see two of the modifications that i posted to good use. The Ouya Framework that i pulled from my madcatz mojo and freezing kftv launcher using titaniumbackup. the way that i got ouya to boot was i used autopilot to launch it at startup and when i need to exit i would simply hit the home button.
mejdam said:
im glad to see two of the modifications that i posted to good use. The Ouya Framework that i pulled from my madcatz mojo and freezing kftv launcher using titaniumbackup. the way that i got ouya to boot was i used autopilot to launch it at startup and when i need to exit i would simply hit the home button.
Click to expand...
Click to collapse
Have you looked into the BAXY launcher for OUYA? Withe the normal OUYA launcher, it was hijacking my home button. I couldn't play the OUYA games unless it was active, but freezing it and running BAXY worked.
xm41907 said:
Have you looked into the BAXY launcher for OUYA? Withe the normal OUYA launcher, it was hijacking my home button. I couldn't play the OUYA games unless it was active, but freezing it and running BAXY worked.
Click to expand...
Click to collapse
I have not used baxy, matter of fact i only own one fire tv left, i mostly changed to nexus player and im slowing getting rid of all my legacy boxes and making room for the razer forge tv.
i loaded the tv launcher so once autopilot booted into the ouya launcher i would install all the ouya apps and just go back to the tv launcher and launch the apps from that screen instead. im not really a gamer so all this was more for a proof of concept.
BTW, have you seen my thread of configuring IPTV on your fire tv? if not i would really look into it.
mejdam said:
i loaded the tv launcher so once autopilot booted into the ouya launcher i would install all the ouya apps and just go back to the tv launcher and launch the apps from that screen instead. im not really a gamer so all this was more for a prove of concept.
Click to expand...
Click to collapse
That works too, but the OUYA framework would still hijack my home button at times, no matter what launcher I was using. Perhaps I might be able to keep that from happening with autopilot. I've just not taken the time to bother with OUYA stuff much once, games are installed, I haven't needed to go into the OUYA menus.
mejdam said:
BTW, have you seen my thread of configuring IPTV on your fire tv? if not i would really look into it.
Click to expand...
Click to collapse
I played with it and have it working some. I have been really busy with a different project, until last Saturday. Now I've got some free time to fiddle more. I have some controller things I'm going to fiddle with first.
Awesome customization.. but wud be great if you could post some instructions to newbs like me on how to setup the NovaLauncher/Live Wallpaper and the external
HD for storage. I know it's a long list but hoping you could put some instructions down. (Or) @aftVNEWS if you happen to look at this post please try to put something if you can.
Cheers !
ncube2 said:
Awesome customization.. but wud be great if you could post some instructions to newbs like me on how to setup the NovaLauncher/Live Wallpaper and the external
HD for storage. I know it's a long list but hoping you could put some instructions down. (Or) @aftVNEWS if you happen to look at this post please try to put something if you can.
Cheers !
Click to expand...
Click to collapse
Thanks. Did you not see all the links I posted below the video? They're there. Well, minus the Nova Launcher setup, but look at post #9.
Nice video, thanks for the info, checking out setting up the live wallpapers & nova launcher.
I have an Amazon Game Controller for the AFTV and I don't have a problem with compatibility with any games like I did using my Xbox 360 controller & a PS3 controller i have. Glad I picked one up.
Shadowgun HD 2.5 is what I have and it works great with the AGC. You can program which keys are what and it works with the shoulder buttons (tops ones, didn't try the bottom ones).
I do want to point out that the 2 shoulder bottom buttons don't work with many games unless they are program to use an analog steer & analog break (or at least something like that, forget what the games that see them call it).
And as for loading up a ton of games to check out later, I'm down. I've done the same thing. Most are crap or the ones the would be fun just don't work, but you know, it's the journey, right?
I am setting up a media streaming device for someone who isn't tech savvy but wants to use NP for movies/tv/Netflix.. What are the best basic settings/config for using NP with Kodi and Netflix? They may or may not use external usb or mouse/keyboard.
5.1.1? Android M preview 3?
Rooted?
TWRP?
Custom Rom? CM12 / other??
**UPDATE**
Here is what I did which seems to work great:
- Unlocked Bootloader
- Flashed TWRP
- Flashed 6.0 firmware (fugu) from Google's site
- Kodi installed from google play.
- Used “http://fusion.tvaddons.ag” addon to help with installing/updating streams. Selected "hubwizard" and "addoninstaller" under "start-here" directory to get basic addons/content/features working.
- Saw an issue with constant buffering. Used: Programs > Maintenance Tool > System Tweaks > Zero Cache (Yes when menu popped up). This expands the space where the download is stored, allowing a longer buffer than default. So you can pause a slow loading tv show/movie and let it load so you dont have viewing issues.
- Enabled Autoplay option on Genesis settings which is easier than searching thru the links provided.
- Added the xml file shown here so that I could use the Play/Pause button as a "right-click" option when content isn't playing.
Let me know if there is anything else I can change to make things run smoother. Otherwise, I'm pretty happy with the set up.
didn't see any response so I kept digging and came up with this...
- Using stock 5.1.1 from the standard update. Waiting until M preview is in a more final state.
- Kodi installed from google play.
- Installed “http://fusion.tvaddons.ag” addon to help with installing/updating streams. Help link here.
- Installed Genesis and Phoenix right away for basic content.
- Saw an issue with constant buffering. Used the TV Addon program to "Clear Cache" and enabled "Zero Cache". This expands the space where the download is stored, allowing a longer buffer than default. So you can pause a slow loading tv show/movie and let it load so you dont have viewing issues.
This seemed to get content streaming pretty good, but I could use any additional tips to make it better.
mmgill said:
didn't see any response so I kept digging and came up with this...
- Using stock 5.1.1 from the standard update. Waiting until M preview is in a more final state.
- Kodi installed from google play.
- Installed “http://fusion.tvaddons.ag” addon to help with installing/updating streams. Help link here.
- Installed Genesis and Phoenix right away for basic content.
- Saw an issue with constant buffering. Used the TV Addon program to "Clear Cache" and enabled "Zero Cache". This expands the space where the download is stored, allowing a longer buffer than default. So you can pause a slow loading tv show/movie and let it load so you dont have viewing issues.
This seemed to get content streaming pretty good, but I could use any additional tips to make it better.
Click to expand...
Click to collapse
I'm currently searching for some options as well. I will let you know what I find.
Sent from my SM-N920P using Tapatalk
I used TVAddons for a long time, on Ouya, an HTPC, and the Nexus Player. But I have recently been using The Beast by Chris B http://chrisbkodi.uk
I installed on my NP with this method: Install Kodi from the Play Store. Go to System>File Manager>Add Source type http://spartanpixel.net/repo click OK
Go to System>Addons>Install From Zip , select repo as the source, then select the zip and click OK. Wait about 10-15 seconds, you should see a message that the wizard has been installed.
Go to Programs, and select the config wizard. You should see the option of installing two different builds: The Beast or Spartan. I have tried both, I don't know what the major differences are other than the skin for Spartan is pretty cool. It's going to take a few minutes to install, so don't worry if it's slow and you will see another install progress bar after the first one finishes. After the entire process is done, you will get a message saying that installation is complete. So click OK, now THIS part is VERY important: The next message will say that you need to force shutdown Kodi, DO NOT click the button saying to go ahead and shut down. You will need to actually pull the power cord out from the back of the Nexus Player, and then plug it back in. Wait for it to boot up, go to Kodi and you should now see The Beast splash video. Everything will be configured for you, but you may want to go in and disable the adult stuff if you dont want it, and get rid of anything else that you dont want. I find some of the IPTV stuff is a little difficult to work with so I dont use much of it.
The only other thing I have done is go into Video settings, and set it to sync to my display refresh rate. You will also want to use ES File Explorer to upload a keymapping xml for the remote. https://www.dropbox.com/s/c1r944j93oj8sq6/nexus_remote.xml?dl=0
mmgill said:
didn't see any response so I kept digging and came up with this...
- Using stock 5.1.1 from the standard update. Waiting until M preview is in a more final state.
- Kodi installed from google play.
- Installed “http://fusion.tvaddons.ag” addon to help with installing/updating streams. Help link here.
- Installed Genesis and Phoenix right away for basic content.
- Saw an issue with constant buffering. Used the TV Addon program to "Clear Cache" and enabled "Zero Cache". This expands the space where the download is stored, allowing a longer buffer than default. So you can pause a slow loading tv show/movie and let it load so you dont have viewing issues.
This seemed to get content streaming pretty good, but I could use any additional tips to make it better.
Click to expand...
Click to collapse
Guys, I follows this and went with the xbmc repo, a lot of the channels are dead.
How do I install Genesis?
Also, how do I undo what I did? Uninstall fusion and start from scratch. I'd like to try some other builds above.
Sent from my Nexus 6 using Tapatalk
mmgill said:
I am setting up a media streaming device for someone who isn't tech savvy but wants to use NP for movies/tv/Netflix.. What are the best basic settings/config for using NP with Kodi and Netflix? They may or may not use external usb or mouse/keyboard.
5.1.1? Android M preview 3?
Rooted?
TWRP?
Custom Rom? CM12 / other??
Click to expand...
Click to collapse
mmgill said:
didn't see any response so I kept digging and came up with this...
- Using stock 5.1.1 from the standard update. Waiting until M preview is in a more final state.
- Kodi installed from google play.
- Installed “http://fusion.tvaddons.ag” addon to help with installing/updating streams. Help link here.
- Installed Genesis and Phoenix right away for basic content.
- Saw an issue with constant buffering. Used the TV Addon program to "Clear Cache" and enabled "Zero Cache". This expands the space where the download is stored, allowing a longer buffer than default. So you can pause a slow loading tv show/movie and let it load so you dont have viewing issues.
This seemed to get content streaming pretty good, but I could use any additional tips to make it better.
Click to expand...
Click to collapse
cadillax02 said:
I'm currently searching for some options as well. I will let you know what I find.
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
wendellc said:
Guys, I follows this and went with the xbmc repo, a lot of the channels are dead.
How do I install Genesis?
Also, how do I undo what I did? Uninstall fusion and start from scratch. I'd like to try some other builds above.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Go to your Programs section in Kodi, there is a Fresh Start option that the fusion installer should have added. Run that and it should put you back to vanilla Kodi.
If you are able to side load, and you want the TV Addons build, maybe try side loading TVMC you should be able to put the APK on a thumb drive and access via ES File Explorer, be sure to enable Unknown Sources in Android.
One combo that worked well for me was side loading SPMC and then running the fusion installer.
wendellc said:
How do I install Genesis?
Click to expand...
Click to collapse
Follow the instructions above for Fusion.
Select Lambda repo zip for Genesis
Select XBMChub zip for TVAddons (Phoenix)
Setting up the pirate side of Kodi for somebody else with no knowledge of the world you are getting them into is a bad deal for you. These pirate addons are not for the uninitiated. They are unreliable at best. Make sure you are willing to be their continual tech support. In the past 45 days or so everything mentioned in the thread have undergone some catastrophic failure or complete relaunch. Make sure you teach your friend how this stuff works so there are no unrealistic expectations of availability or reliability.
pawdog said:
Setting up the pirate side of Kodi for somebody else with no knowledge of the world you are getting them into is a bad deal for you. These pirate addons are not for the uninitiated. They are unreliable at best. Make sure you are willing to be their continual tech support. In the past 45 days or so everything mentioned in the thread have undergone some catastrophic failure or complete relaunch. Make sure you teach your friend how this stuff works so there are no unrealistic expectations of availability or reliability.
Click to expand...
Click to collapse
Maybe with the Live TV feeds they are. But Genesis is fairly rock solid. I can do without the others (for the most part).
Loaded THE BEAST.
I really like the interface (large fonts; cool backdrop images) for KODI.
I just had to turn off every other section but the main MOVIES/SPORTS/LIVE TV sections though because it's so laden with adult content links.
I wish it would come more like stock (without all the adult) and a wizard to add on the adult stuff if people desire.
Otherwise, it has been stable.
The LIVE TV links are still very hit and miss with THE BEAST.
S4F4M said:
Maybe with the Live TV feeds they are. But Genesis is fairly rock solid. I can do without the others (for the most part).
Loaded THE BEAST.
I really like the interface (large fonts; cool backdrop images) for KODI.
I just had to turn off every other section but the main MOVIES/SPORTS/LIVE TV sections though because it's so laden with adult content links.
I wish it would come more like stock (without all the adult) and a wizard to add on the adult stuff if people desire.
Otherwise, it has been stable.
The LIVE TV links are still very hit and miss with THE BEAST.
Click to expand...
Click to collapse
still debating on rooting the nexus player, I downloaded the kodi app, and installed kodimaster? (not sure of exact repo) but I did read about the the beast repo being pretty solid as well. I think for the most part I'm happy with the nexus player at $24.98 and the kodi app does pretty much everything I need it to do with movies & shows. I still have more to learn with live tv, nfl network, and what else itll provide
osugsxr said:
still debating on rooting the nexus player, I downloaded the kodi app, and installed kodimaster? (not sure of exact repo) but I did read about the the beast repo being pretty solid as well. I think for the most part I'm happy with the nexus player at $24.98 and the kodi app does pretty much everything I need it to do with movies & shows. I still have more to learn with live tv, nfl network, and what else itll provide
Click to expand...
Click to collapse
Rooting is a toss-up.
If you want to keep 5.0, then you need to root.
If you want Marshmallow, then do not root right now.
Root and flashing to older images (if needed for whatever reason) is pretty straight-forward.
Tons of guides on the internet/Youtube.
Live TV is hit or miss.
With movies and shows on Genesis, play is fine unless I pick a bad stream. Then, the data feed is too slow to keep up and the show/movie pauses/buffers.
Last night, though, I wanted to check the score of the game, so I loaded ESPN from cCloudTV. It was buffering every 5 seconds. Basically unwatchable.
Not sure if it was due to the stream (# of people streaming = low data feed) and/or my connection speed (20 mbps). But live TV does not really "buffer" like movies/shows as it is not a DVR, so when it buffers, the live action wants to catch up, so you get skips/stutters, etc.
Likewise, I do not know if I'm missing addons or the streams are not reliable, but channel surfing is not really reliable. I get error messages that I need to check the log.
I got Kodi setup with all the 'free' stuff = thanks to this thread.
I am trying to add my own local content, but when I go to add the SMB share, I can see all the computers on my network, I can select my home server (windows 8.1), but after I select it, I get an error and I cannot connect to the share.
My windows based Kodi setup finds my server just fine and I can add the seperate shares with no issues. Anyone else experience this issue on the NP?
i definitely need to do the play/pause right click mod
I was able to setup a SQL server and one HTPC a firetv and my new nexus player are able to connect. no issues.
I gave up on garbage Kodi, everyone tells me how great it is well, if you mean about 30 minutes searching through dozens and dozens of stupid streams to get one that will actually play and not buffer, then yeah works great. I was told, use autoplay then you won't have that issue, well, I turned on autoplay and stupid POS still didn't work, either the video wouldn't play/buffer/stutter, or it just wouldn't load any streams at all. Also kept getting cache was full errors constantly so I gave up and went back to simple easier torrents.
S4F4M said:
Maybe with the Live TV feeds they are. But Genesis is fairly rock solid. I can do without the others (for the most part).
Loaded THE BEAST.
I really like the interface (large fonts; cool backdrop images) for KODI.
I just had to turn off every other section but the main MOVIES/SPORTS/LIVE TV sections though because it's so laden with adult content links.
I wish it would come more like stock (without all the adult) and a wizard to add on the adult stuff if people desire.
Otherwise, it has been stable.
The LIVE TV links are still very hit and miss with THE BEAST.
Click to expand...
Click to collapse
Start out with a fresh copy of Kodi 15.2 then add all the sources for repos(srp.nu, tvaddons.ag, etc.). Then install all the repos. And Then install all the add-ons from the repos you just installed. Then load elmerohueso' s repo from fusion so you can use his helix ++ skin (it allows you to use "any" 7 icons under "any" of the main screen sections (pictures,videos,music,..etc). This way you have access to all the addons add-ons you want without any of the stuff you don't.
S4F4M said:
Rooting is a toss-up.
If you want to keep 5.0, then you need to root.
If you want Marshmallow, then do not root right now.
Root and flashing to older images (if needed for whatever reason) is pretty straight-forward.
Tons of guides on the internet/Youtube.
Live TV is hit or miss.
With movies and shows on Genesis, play is fine unless I pick a bad stream. Then, the data feed is too slow to keep up and the show/movie pauses/buffers.
Last night, though, I wanted to check the score of the game, so I loaded ESPN from cCloudTV. It was buffering every 5 seconds. Basically unwatchable.
Not sure if it was due to the stream (# of people streaming = low data feed) and/or my connection speed (20 mbps). But live TV does not really "buffer" like movies/shows as it is not a DVR, so when it buffers, the live action wants to catch up, so you get skips/stutters, etc.
Likewise, I do not know if I'm missing addons or the streams are not reliable, but channel surfing is not really reliable. I get error messages that I need to check the log.
Click to expand...
Click to collapse
Alternatives to ccloud: You need to install dextertv(plays live tv really well even on 3mbs time warner connection but you need to sign in with a valid email- I just use a temp email generator easily found on google search), and UFO stalker clone(youtube kraz inabox) or i4ATV which are both stalker clones and play over 800 channels really well without buffering. Google search, DexterTV, Kraz inabox, newtechevotution, Joenobody010101, husham memar, soloman for awesome turorials on the latest greatest add-ons
Shftup said:
I got Kodi setup with all the 'free' stuff = thanks to this thread.
I am trying to add my own local content, but when I go to add the SMB share, I can see all the computers on my network, I can select my home server (windows 8.1), but after I select it, I get an error and I cannot connect to the share.
My windows based Kodi setup finds my server just fine and I can add the seperate shares with no issues. Anyone else experience this issue on the NP?
Click to expand...
Click to collapse
Get a micro usb to regular usb hub and insert a zip drive with the content you want and then transfer it from the zip drive to kodi by using file explorer you can download from the play store. With the hub you can also install a keyboard/track pad combo like the logitect k400 keyboard (ususally on sale for 19.99) and its makes using/navigating kodi or the nexus player much easier.
ninerpride said:
I gave up on garbage Kodi, everyone tells me how great it is well, if you mean about 30 minutes searching through dozens and dozens of stupid streams to get one that will actually play and not buffer, then yeah works great. I was told, use autoplay then you won't have that issue, well, I turned on autoplay and stupid POS still didn't work, either the video wouldn't play/buffer/stutter, or it just wouldn't load any streams at all. Also kept getting cache was full errors constantly so I gave up and went back to simple easier torrents.
Click to expand...
Click to collapse
I disagree about kodi being garbage. It's awesome software. If you were Genesis...make sure to clear cache and sources from within genesis tools section. Autoplay does work but you need to configure the streams you prefer from the information section of genesis. Also make sure you're on version 5.1.4. Some of rhe other great add-ons: phoenix, primewire/one channel, SALTS, projectfreetv, navix, movie night, movied hd, ...etc. With a decent connection all of these addons feature great content and have search functiions to find whatever you're looking for. STAY away from torrents. They provide way less anonymity than you might think...
ninerpride said:
I gave up on garbage Kodi, everyone tells me how great it is well, if you mean about 30 minutes searching through dozens and dozens of stupid streams to get one that will actually play and not buffer, then yeah works great. I was told, use autoplay then you won't have that issue, well, I turned on autoplay and stupid POS still didn't work, either the video wouldn't play/buffer/stutter, or it just wouldn't load any streams at all. Also kept getting cache was full errors constantly so I gave up and went back to simple easier torrents.
Click to expand...
Click to collapse
Don't despair. I've some good news for you. Unlike cable companies, which you are obliged to subscribe to if you live in a certain area (Laissez-faire at its best), no one has to use the POS called Kodi. And no one will do bad things to you if you don't. You always have the choice of forking out a hundred bucks or more a month for the rubbish that would stream flawlessly on your tv (Freedom at its best - where you consistently get 15 minutes of consumerism-driven "information" out of a 25-minute program) if you can't stand the minimal work one has to put in for the stuff you get for free and whose content you totally control.
I'm sure the people who designed the POS (your opinion) did the best they could, and do not get justly compensated for it. What you said don't sound really appreciative of it to me.
Maybe can help
I using this ROM pure nexus 6.0 from dhacker29 http://forum.xda-developers.com/nexus-player/development/rom-pure-nexus-t3260232
As well after all done, download kodi from the play store and them follow this threat http://www.geek.com.do/mejores-fuentes-repositorios-kodi-xbmc/ ah sorry its is Spanish, use Google translate
I just did the whole Kodi install thing with the repos that the kids are selling these days on Ebay for like $80+ installed on a Amazon Firestick. Pretty funny that they are making money off of doing that. I only found out about that from my friend who actually paid $$ for one of those and decided to research it and attempted to do it on my NPlayer.
I agree with @ninerpride somewhat. While I don't think it's Kodi that is "garbage", its more the streams fault. It DOES get annoying attempting to go down the list to try and find a stream that actually plays. @graphdarnell, I concur with you, my Time Warner cable bill is over $100 USD and I get nothing for it. I'm always looking for ways to cut the cord and get out of this because the bill just keeps going up every year.
I heard that Genesis, etc is no longer being supported because the DEV found out about the "hacker kids" selling his work on Ebay pre-loaded onto those Amazon Firesticks. Anyone hear the same? Someone suggested to instead install "SALTS" but while it's much better, it's still annoying trying to find a stream that works.
Using the BEAST build installed from AresWizard.cok.uk/zip and it's been great so far. Phoenix based and most of the content is decent. Live TV is pretty good. Best I've used for KODI so far