Related
I rooted my hero last night and tried out a few different ROMs but eventually decided to revert to stock and make some manual changes. I used nandroid to restore to just after the root (1.56.651.2). I was able to remove some apps using adb, but the adb remount command fails (permission denied), and I'm unable to push a new bootscreen on to the phone. I also tried a Root File Manager and pre-kitchen as alternatives for the bootscreen, and neither one works. The Root Manager won't paste the files from SD into /system/media/ and pre-kitchen just reboots the phone.
Any suggestions?
Any chance this has something to do with downloading only up to SDK Platform 1.5? I'm at a total loss. I RUU'd my phone, did a clean root at startup using adb shell, and I still have the same problem. The adb remount command won't work, and I can't push anything into the system directory. For what it's worth, when I still had Root Manager installed I was able to toggle RO R/W in any directory with no problem, and I could move files around within the ROM... but I couldn't move anything into it from the SD. I'm new at this, so I have no idea what the problem might be. Anyone else had this problem or have any suggestions?
If anyone else runs into this problem, this solution worked for me:
adb shell
# su
# mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
# chmod 777 /system (Or any subdirectory you want to push to inside system)
# exit
adb push <local file> <device location>
Restore modified permissions when done.
Though I'm still not sure why this is necessary in place of adb remount.
I'm pretty sure the adb remount command will not work on the stock rom. You should be able to do it with just this command instead:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
dametzg said:
I'm pretty sure the adb remount command will not work on the stock rom. You should be able to do it with just this command instead:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
Click to expand...
Click to collapse
Thanks... didn't realize stock wouldn't accept adb remount. If I use the above line from within shell, that doesn't help me push anything on to the phone though... so I needed to enable global permission and then do the push. Oddly enough I tried the same approach last night using Root Manager, and the transfer from SD still failed, even after I applied 777 to the dir I was trying to modify. The current solution may be kind of tedious, but at least it works.
you really shouldn't do 777 on your filesystem, ANY app can then write to your system, overwrite things, or install malicious code. Just remount manually and you should be able to push anything you want, just remember that w/ the stock rom you also don't get a full busybox either.
I'm not positive, but I would think after you remount, you should be able to "adb push" to /system. I suppose it might be specific to that shell, but I would think not.
You just may have to do it once each time you boot your phone.
Edit - err nevermind... you're having permission errors.... um... change adbd on the phone to run as root? not sure how off the top of my head...
This is copied from the Droid2 section and is said to work on the X for those of us that didnt move SU b4 updating to 2.2 or those that lost root for whatever reason.
Cool How to root the Droid 2
All credit goes to Sebastian Krahmer at http://c-skills.blogspot.com/. Please see fit to donate via Paypal to [email protected]
***NOTE: Proceed at your own risk. I and the providers of this code are not responsible for anything you do to your phone!***
Setup:
- Install adb (here) and Motorola drivers for windows(32-bit or 64-bit)
- Download attached archive
- Extract to a directory, I used c:\Droid2Root
- Make sure you have USB degugging enabled
- Change connection to PC Mode
Process:
- Open command prompt
- cd c:/wherever-your-sdk-tools-folder-is
- adb devices (to verify the connection)
- cd c:/Droid2Root
- adb push Superuser.apk /sdcard/Superuser.apk
- adb push su /sdcard/su
- adb push busybox /sdcard/busybox
- adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin
- adb shell
- cd data/local/tmp
- chmod 0755 rageagainstthecage-arm5.bin
- ./rageagainstthecage-arm5.bin
- let the process run until it 'kicks' you out (may take a minute or two)
- cd c:/wherever-your-sdk-tools-folder-is
- adb devices (to verify the connection)
- adb shell (you should now have a # prompt, if not return to ./rage step above)
- mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
- cp /sdcard/Superuser.apk /system/app/Superuser.apk
- cp /sdcard/su /system/bin/su
- cp /sdcard/busybox /system/bin/busybox
- chmod 4755 /system/bin/su
- chmod 4755 /system/bin/busybox
- mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system
- exit
- exit
I'm sure there are certain steps that could be streamlined or eliminated, so please feel free to make a suggestion and I'll edit the post.
Additional thanks to @rainabba and AllDroid.org for their excellent Droid X rooting tutorial, which assisted me greatly in this process.
Attached Files
File Type: rar Droid2Root.rar (954.1 KB, 733 views)
Last edited by karnovaran; Yesterday at 01:58 PM.. Reason: Clarity
Reply With Quote
Hello all...
This worked on my DX that I upgraded to 2.2 just fine. The root pw isn't given anywhere in the instructions as it is in the 2.1 manual root steps.
Any thoughts on the root pw so that I can SSH to the device after rooting?
This method worked for me after thru much trial and error I was able to update to Froyo only to discover I lost root. Did not want to roll back to 2.1 and start over. Thanks so much to everyone who came up with root process and to those who discovered it worked on the DX.
I tried intstalling the 64bit drivers (then rebooted) then hooked it up in PC mode and can't seem to get it to show up in the list of attached devices.
Tried uninstalling and reinstalling everything, the one click roots say it can't find my droid X and going through your instructions adb can't find my device ether. I kinda been having a problem with doubletwist where it doesn't recognize my device properly, could that be related?
I don't know why, but after typing ./rageagainstthecage-arm5.bin it showed the text talking about donations, etc went right back to the $ prompt, and never booted me out of shell. I waited 15 minutes at the $ prompt before Ctrl-break'ing out of shell and trying to relogin. noticed adb is repsonding sluggish. Maybe it's still working? Anyone else having this problem?
Edit: I retried the ./rageagainstthecage-arm5.bin command after rebooting the phone and it worked this time. And I'm rooted! Wireless Tether for Root app works perfectly!
Also I notice when I say PC mode the little debugger icon then doesn't show up like it does in USB mode or charge mode. could this be why the device isn't showing up?
Ok so I manage to get everything good up until the point where I should be looking for a # instead of a $ for terminal. I've done the rage and waited till it kicked me out and went back in and got the same result.
The way that I got through my problems is I set the droid x to USB charge only mode (PC mode there was no debugging and every time I plugged it in, it wouldn't take the ADB driver it wanted a MB810 or something driver)
I know I set the permissions right, and it does run (shows up a little message about donating and in a min or so kicks me out, anything else I can try?
Thanks for the help.
mavermc said:
I tried intstalling the 64bit drivers (then rebooted) then hooked it up in PC mode and can't seem to get it to show up in the list of attached devices.
Click to expand...
Click to collapse
You need to turn off USB debugging first time you connect DX to PC and let the drivers install. After the drivers install, turn on USB debugging and let the driver installation complete again. Then go in terminal (also make sure you change directory to where the adb application is) and type in "adb devices". If your device does not show up, change USB connection method to Windows Media Sync mode on DX and try again.
I hope that helps because that is the limit of my knowledge on the subject.
No reboot, battery pull, then reboot = weird!
Okay, so after I rooted my DX, I went to reboot it (powered off then back on) and it got stuck on the M screen. So I pulled the battery, reinserted it, and then powered on again. It rebooted fine. So...why the battery pull?? Anyone??
So i rooted using this method, (finally got it to work, just used it in usb charge mode on a XP machine) Now my phone seems to drop battery like crazy, all I've changed besides the root is install set cpu (and set some profiles to lower the clock with screen off and low battery and hi temp) installed battery life widget and a little white widget that shows what the current clock speed is. oh and wifi teather, any idea why my battery just sucks now? and things like battery info (to show whats using the battery) force closes on me after root, anyone else with these problems?
read-only what? help!!
is it ppossible to do this from the device?
Will this root work on ota froyo upgrade that we will have in a few days?
Sent from my DROIDX using XDA App
Like many have said it works perfectly if you disable the USB Debugging...install all drivers again and then put it in "Charge Mode"
I finally have my phone rooted...Now I know why my Deodex didnt wanna work. Thanks to all for releasing this and ending my headache
Hi all.
Give a try to my version of the instructions. This is kind of like the holy grail of rooting the Droid 2 at the moment. Much clearer! More info! Enjoy!
http://forum.xda-developers.com/showpost.php?p=7865824&postcount=164
dscottjr81 said:
- ./rageagainstthecage-arm5.bin
- let the process run until it 'kicks' you out (may take a minute or two)
- cd c:/wherever-your-sdk-tools-folder-is
- adb devices (to verify the connection)
- adb shell (you should now have a # prompt, if not return to ./rage step above)
Click to expand...
Click to collapse
One thing I found was after it ran and returned to a cursor, I closed the cmd window and relaunched it and had no issues. Before I restarted I did switch to Charge only w/ USB debug active.
It wouldn't work at all for me until I put the contents of the Droid2Root.rar in my /tools folder. The adb commands would not work as soon as I "cd c:/Droid2Root", but the adb commands would work in the /tools folder. So I just put the contents of the Droid2Root.rar in my /tools folder and it worked just fine. O yea I'm on the OTA 2.2 (2.3.15) that came out today. I also did it under "Charge Only" with debugging.
So I take it that the One-Click root will not work withfroyo 2.2 update????
i continuously get the money sign even after it kicks me out from the ./rage step and i kill-server then adb shell.
its still there even after 3 attempts at the ./rage step what should i do? it just wont (#) prompt me
Hi, I'm pretty geeky for a non IT person, but I have had a Blackberry up until now, so I am totally new to this Android set up. I have the Epic on Sprint; am frustrated with battery life, and would like to try and root the phone for 2.2 froyo. however most of the tutorials blow through the lingo (adb, huh?) in a way that is not explanatory for people who are new to this. Is their either a visual step-by-step guide for people or a more basic explanation of what is what and what to do somewhere? And, so far all I've seen is for Windows people. I have a Mac running snow leopard?
Help!
tromano said:
Hi, I'm pretty geeky for a non IT person, but I have had a Blackberry up until now, so I am totally new to this Android set up. I have the Epic on Sprint; am frustrated with battery life, and would like to try and root the phone for 2.2 froyo. however most of the tutorials blow through the lingo (adb, huh?) in a way that is not explanatory for people who are new to this. Is their either a visual step-by-step guide for people or a more basic explanation of what is what and what to do somewhere? And, so far all I've seen is for Windows people. I have a Mac running snow leopard?
Help!
Click to expand...
Click to collapse
I'm thinking of writing a script for Mac users, i don't have an epic but my xo-worker does and i rooted his today on my Mac, not as simple as the one click root but is doable.
that would be awesome; i guess the main things are 1. if you root it, can you upgrade to 2.2? 2. if you root it and upgrade, can you undo everything to factory?
Id be interested in this also
Sent from my SPH-D700 using Tapatalk
tromano said:
that would be awesome; i guess the main things are 1. if you root it, can you upgrade to 2.2? 2. if you root it and upgrade, can you undo everything to factory?
Click to expand...
Click to collapse
1. Rooting doesn't instantly make you 2.2 Upgradeable. 2.2 Froyo comes in different flavors for different manufactures. They lock the phone down with their systems so they phone cannot be unlocked, etc. Right now we are a bit far behind in getting 2.2 on the Epic. I think Sprint might even get it faster.
2. If you root you can ALWAYS go back to stock. They is a guide right here for returning to stock 2.1 and undo everything to factory.
It's kind of crude, but I wrote this for someone over at SDX-Developers to try. I think they were successful.
I don't use Macs much, but here's Joey's Permanent Root Method process I used to get it working under linux. The same method can be done through a Mac's Terminal if you're not intimidated by using command line.
First download Android-SDK for OSX.
http://developer.android.com/sdk/index.html
Once downloaded extract it and save to the root of your Mac's hard drive. Then rename the folder "android-sdk"
Next download the following files and save them to the /android-sdk/tools folder.
http://www.joeyconway.com/epic/root/joeykrim-root.sh
http://www.joeyconway.com/epic/root/jk-su
http://www.joeyconway.com/epic/root/rageagainstthecage-arm5.bin
http://www.joeyconway.com/epic/root/playlogo
Next open a terminal window. (command key + space then type terminal)
At the prompt, type "cd /android-sdk/tools"
If you save the files where I told you to, you shoud be able to copy and paste the commands into your terminal window. Do one line at a time and press enter after each pasting.
./adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin
./adb push joeykrim-root.sh /sdcard/joeykrim-root.sh
./adb push jk-su /sdcard/jk-su
./adb push playlogo /sdcard/playlogo
./adb shell
chmod 755 /data/local/tmp/rageagainstthecage-arm5.bin
cd /data/local/tmp
rageagainstthecage-arm5.bin
exit
./adb shell
mount -t rfs -o remount,rw /dev/block/stl9 /system
cat /sdcard/joeykrim-root.sh > /system/bin/joeykrim-root.sh
cat /sdcard/jk-su > /system/bin/jk-su
mv /system/bin/playlogo /system/bin/playlogo-orig
cat /sdcard/playlogo > /system/bin/playlogo
chmod 755 /system/bin/playlogo
chmod 755 /system/bin/joeykrim-root.sh
exit
Click to expand...
Click to collapse
Issue for operation not permitted
I got all the way to the last paragraph of ./adb shell but cannot get the mount line to work....it says operatino not permitted. I put everything in the mac's root section just inside mac hd.
HELP!! I put hte phone in debug mode....did I need ot install any drivers from samsung....help!!!
-J
jayhover85 said:
I got all the way to the last paragraph of ./adb shell but cannot get the mount line to work....it says operatino not permitted. I put everything in the mac's root section just inside mac hd.
HELP!! I put hte phone in debug mode....did I need ot install any drivers from samsung....help!!!
-J
Click to expand...
Click to collapse
Were you able to get this working?
Root
No, I was not.
Check out this snippet of the instructions (I'll number them for ease):
<snip>
1.) cd /data/local/tmp
2.) rageagainstthecage-arm5.bin
3.) exit
4.) ./adb shell
5.) mount -t rfs -o remount,rw /dev/block/stl9 /system
</snip>
When you ran step 2, what happened? You may have to run the command this way with a dot and slash in front instead:
./rageagainstthecage-arm5.bin
When you ran step 4, did you get a $ or a #? If you got a #, step 5 should work properly. If you got a $, you'll need to do re-run the ./rageagainstthecage-arm5.bin step again. Re-running this step doesn't hurt anything. Good luck.
ss4rob said:
Check out this snippet of the instructions (I'll number them for ease):
<snip>
1.) cd /data/local/tmp
2.) rageagainstthecage-arm5.bin
3.) exit
4.) ./adb shell
5.) mount -t rfs -o remount,rw /dev/block/stl9 /system
</snip>
When you ran step 2, what happened? You may have to run the command this way with a dot and slash in front instead:
./rageagainstthecage-arm5.bin
When you ran step 4, did you get a $ or a #? If you got a #, step 5 should work properly. If you got a $, you'll need to do re-run the ./rageagainstthecage-arm5.bin step again. Re-running this step doesn't hurt anything. Good luck.
Click to expand...
Click to collapse
i'm stuck. i just got my epic and i'm trying to root it. i get to step 2 (using "./" before rage...cage) and terminal looks like it's running something. i type in "exit" when it finishes and it's as if my terminal logs me out. i can't reach step 4 and the screen on my epic has gone black by now. frozen up. i need to remove the battery to reboot and unfreeze my device. what am i doing wrong? am i missing a step somewhere? also, the "playlogo" file saves as ".sh" at the end, so in the terminal i manually enter that at the end of the file name just so that it can be read. "playlogo" without the ".sh" at the end cannot be found. is this what's causing it? any help would be greatly appreciated. i'm trying not to brick my phone!
should i flash it. i dont have root
WOW! i cant believe no one has replied to you.
if you take a look at the first post with the topic
[ROM] Official AOSP 2.2 OTA
but you mentioned you dont have root. so try installing alogcat from the marketplace and capture the whole deal. then you can email directly from the app.
logcat isnt going to do much, it prefetches the files, need to pull the update.zip from adb
ok, so i havnt gotten the notice yet.
but need a bit of help prepping for when i do.
i have the android sdk installed on my desktop, and can create a virtual device etc...
but when i open the cmd prompt and try to run adb devices it says it is populating a list but i see no results or no file created.
so i tried just running adb logcat and it stops at waiting for device.
any pointers. im running win7x64 ultimate
well, i screwed it up. i removed the usb drivers and set it to debugging mode and got it working.
so i am able to run adb shell etc...
once i get the notice ill be ready to do an adb pull
adb shell
su
cd /cache/
ls
adb pull /cache/<package_name>.zip .
sepiid said:
well, i screwed it up. i removed the usb drivers and set it to debugging mode and got it working.
so i am able to run adb shell etc...
once i get the notice ill be ready to do an adb pull
adb shell
su
cd /cache/
ls
adb pull /cache/<package_name>.zip .
Click to expand...
Click to collapse
but how do you know the new radio and spl update name?
you should get that by running su then "cd /cache/ ; ls"
right now i have
download-1.apk
downloadfile.apk
recovery
lost+found
so after it is precached i run that "cd cache/ ; ls" i should have another file or two in there
that would be the file you run adb pull /cache/*.*
a tad bit of help, as a test i am trying to do
adb pull cache/downloadfile.apk d:\
but i get
remote object 'cache/downloadfile.apk' does not exist
i also tried adb pull /cache/downloadfile.apk d:\
and get the same.
edit:
tried doing a adb push
D:\android-sdk-windows\tools>adb push d:\test.txt /cache
failed to copy 'd:\test.txt' to '/cache/test.txt': Permission denied
so i dont have permission to put anything there, which means i likely dont have permission to pull from there
D:\android-sdk-windows\tools>adb pull /cache/downloadfile.apk d:\
remote object '/cache/downloadfile.apk' does not exist
so i opened another cmd prompt and and did an adb shell
su
and i am su
so while the other window was open and i was su i tried the same commands again and got the same results.
edit2:
D:\android-sdk-windows\tools>adb shell ls /cache
opendir failed, Permission denied
so it is definately a su/permissions issue.
Are you rooted? If not use Universal Androot.
*anticipation*
sepiid said:
a tad bit of help, as a test i am trying to do
adb pull cache/downloadfile.apk d:\
but i get
remote object 'cache/downloadfile.apk' does not exist
i also tried adb pull /cache/downloadfile.apk d:\
and get the same.
edit:
tried doing a adb push
D:\android-sdk-windows\tools>adb push d:\test.txt /cache
failed to copy 'd:\test.txt' to '/cache/test.txt': Permission denied
so i dont have permission to put anything there, which means i likely dont have permission to pull from there
D:\android-sdk-windows\tools>adb pull /cache/downloadfile.apk d:\
remote object '/cache/downloadfile.apk' does not exist
so i opened another cmd prompt and and did an adb shell
su
and i am su
so while the other window was open and i was su i tried the same commands again and got the same results.
edit2:
D:\android-sdk-windows\tools>adb shell ls /cache
opendir failed, Permission denied
so it is definately a su/permissions issue.
Click to expand...
Click to collapse
Here do this:
First if you have root, open up terminal or cmd prompt if you are on windows:
adb shell
su
mount -o rw,remount yaffs2 /cache
chmod 777 /cache
that will change the permissions allowing for read and write.
Now exit out of shell and just adb pull /cache/
That will pull everything out of the cache partition.
BAM!!! perfect!
i new it was permissions related. just couldnt figure out the "mount -o rw,remount yaffs2 /cache" part. might i ask you to break that down for me? at least the yaffs2 part.
thanks!
so once the update hits i am ready to grab the files.
callmeradical said:
Here do this:
First if you have root, open up terminal or cmd prompt if you are on windows:
adb shell
su
mount -o rw,remount yaffs2 /cache
chmod 777 /cache
that will change the permissions allowing for read and write.
Now exit out of shell and just adb pull /cache/
That will pull everything out of the cache partition.
Click to expand...
Click to collapse
So the YAFFS2 part of the code I put up there is designating the file system in which we are reading/writing.
YAFFS2 is the most popular and widely used format for flash memory.
please allow me.
yaffs2 is a filesystem type. /cache is of course the directory. -o is for option.
rw: read/write
remount: remount /cache again with new option.
sepiid said:
BAM!!! perfect!
i new it was permissions related. just couldnt figure out the "mount -o rw,remount yaffs2 /cache" part. might i ask you to break that down for me? at least the yaffs2 part.
thanks!
so once the update hits i am ready to grab the files.
Click to expand...
Click to collapse
Oh yeah and BTW, you can change the permissions back if you want after your done, otherwise I believe you can just reboot the phone and it fixes it, not entirely sure, I was trying to rewrite my default.prop to get adb remount to work with stock 1.6 rooted, but I am getting and access denied issue.
perfect was about to ask what the -o was but i tried mount --help and mount -h both resulted in nothing. then you reply sharpt71
thanks again all.
i am now ready to pull the update and upload once i get the update. hopefully soon!
Rather than the remounting and chmoding so you can adb pull.
You could probably get away with
Code:
su
cp /cache/<whatever> /sdcard
Then mount the SD card or put it in a card reader.
SilverSurfR said:
Rather than the remounting and chmoding so you can adb pull.
You could probably get away with
Code:
su
cp /cache/<whatever> /sdcard
Then mount the SD card or put it in a card reader.
Click to expand...
Click to collapse
You probably could I just know that this is a sure fire way to grab everything in cache directly to the machine, otherwise if you aren't next to a machine you could probably do a copy like you said.
My 2nd update failed, do you guys think the files are still in my cache?
It took some doing, but after following the instructions in this link:
http://forum.xda-developers.com/showthread.php?t=2559915
I was finally able to root my Nook Glowlight. The instructions are kind of sprawled out and extremely unclear so I will sum up.
As always, you will need the ADB. In order to install the ADB, you need the Java Development Kit and the Android Studio (formerly known as the Android SDK)
http://www.oracle.com/technetwork/java/javase/downloads/index.html
http://developer.android.com/sdk/installing/studio.html
How to obtain root via ADB: The ONLY way you can root is using Windows. I was successful on Windows 7 32 bit, but it may be possible on other versions.
step 1) install bootloader driver.
You need to grab the drivers from here (bnusbdrivers.zip):
http://forum.xda-developers.com/showpost.php?p=49665945&postcount=279&nocache=1&z=184593200683593
then, open the Device Manager (on Windows). Be ready to right click on the new device 'omap3660' that shows.
With the nook turned completely off, plug in a USB cable. you will have less than 3 seconds to right click the new omap3660 device that shows up in the system profiler.
If you were successful and you right clicked on it in time, manually install the Barnes & Noble USB driver (there are entries added to the generic Google drivers for both the TI Omap 3660 bootloader and the ADB device after you modify the uRamdisk later on)
***NOTE***
If you WEREN'T successful on your first try (took me THREE times to get to it in time), you aren't going to get another chance to install the drivers. At least not easily anyway, because after Windows tries to automatically install the drivers for the bootloader and fails, it will disregard the device any time it shows up after that. So, you are going to need to delete the registry entries that it created, which in my experience was easier said than done. Even admin access was not sufficient to make the necessary changes to the registry.
You will need to launch regedit.exe using another tool called psexec which is available here:
http://technet.microsoft.com/en-us/sysinternals/bb897553.aspx
after you download the pstools package, copy those .exe files to C:\Windows\System32\ (in order to add them to $PATH in cmd.exe)
Then, once you've installed the pstools commands to C:\Windows\System32\, run cmd.exe as admin (right click it and select 'run as administrator') and then open regedit.exe with the following command
Code:
psexec -s -i -d regedit.exe
Then, once regedit is open you need to find the keys created by the Nook bootloader and delete them. The Nook bootloader's device ID is 0451:d00e
You are going to be looking in HKEY_LOCAL_MACHINE\Current Control Set\enum\usb\ for the keys with the bootloader's device IDs. There may also be keys generated in control set 001 and 002 as well. Delete all of those keys and then reboot your computer. Then with the nook power off completely, repeat the process from the first step. eventually you will be successful installing the bootloader driver.
Step 2) temporarily boot with uRamdisk-noogie
you need to download omaplink.exe from here:
http://www.temblast.com/android.htm
and you also need to download the four files which allow you to temporarily mount the boot partition; omap3_aboot.bin, u-boot-ng2-exp-v03.bin, uImage-ng2-130-stk and uRamdisk-noogie.
They are available here:
http://forum.xda-developers.com/showpost.php?p=49779966&postcount=285
download usbboot-ng2-images-noogie-v1.zip
The next part is easy.
Extract the .zip file and then fire up cmd.exe. cd into the directory of the newly extracted .zip
in the new working directory, enter the command
Code:
omaplink omap3_aboot.bin u-boot-ng2-exp-v03.bin uImage-ng2-130-stk uRamdisk-noogie
Then, with the Nook powered all the way off and omaplink running, plug it in and a few seconds later, after the device boots up all the way, you will be looking at the contents of the boot partition instead of the internal storage like normal.
Step 3) Edit uRamdisk
you will need to download bootutil.exe from here
http://www.temblast.com/android.htm
copy bootutil.exe to C:\Windows\System32
with the boot partition mounted, copy uRamdisk to your computer and extract the files init.rc and default.prop, eg;
Code:
bootutil /x /v uRamdisk init.rc default.prop
then using notepad++ (available here: http://notepad-plus-plus.org/) edit the files as follows
default.prop
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
and
init.rc
comment out lines 375 and 392-399
(do this by adding a # to the beginning of the line)
uncomment line 215
(do this by deleting the # at the beginning of the line)
save both files and then repack them into uRamdisk
Code:
bootutil /r /v uRamdisk init.rc default.prop
copy uRamdisk back onto the Nook, eject the disk and power off the device. Reboot and you should be able to connect to ADB via WiFi
eg;
Code:
adb connect 192.168.0.10
replacing '10' with whatever IP your Nook is grabbing from your router.
Step 4) Full Root
at this point, you have root access via ADB only. You will not have root access in any apps like Root Explorer, Terminal, TiBackup, etc.
In order to finish PROPERLY rooting your Nook, you need to install 'su' to /system/bin/ and install the superuser.apk
Code:
adb connect 192.168.0.10
adb shell mount -o remount, rw /system
adb push su /system/bin/
adb shell chmod 6755 /system/bin/su
adb install superuser.apk
reboot your device one more time and then you will be fully rooted.
*** Note ***
this devices firmware seems to be a strange hybrid between donut and eclair, although it purports itself to be Android 2.1. The Superuser.apk and su binary came from an old Cyanogenmod 4.6 build in case anyone was wondering (Android Donut). The ones from Cyanogenmod 5 (Android Eclair) do not work. you will get the 'install failed older sdk' error.
installing busybox
I tired installing busybox by using the stericson busybox pro.apk. It would always freeze at 6.47%.
I figured out that if I grabbed an older version of the busybox binary and pushed it to /system/xbin manually and then chmodded it to the proper permissions, auto updates and proper symlinking work using the busybox app
Code:
adb shell mount -o remount, rw /system
adb shell mkdir -p /system/xbin
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
Then reboot, and run the busybox app to update and create symlinks.
enjoy!
installing nano and bash
Code:
adb connect 192.168.0.10
adb shell
mount -o remount, rw /system
adb push nano /system/xbin/
chmod 6755 /system/xbin/nano
adb push bash /system/xbin/
chmod 6755 /system/xbin/bash
bash
mv /system/bin/sh /system/bin/sh.bak
ln -s /system/xbin/bash /system/bin/sh
chmod 6755 /system/bin/sh
adb push profile /system/etc/
adb push terminfo /system/etc/
and then in terminal emulator under 'Preferences' change the initial command to
Code:
export TERMINFO=/system/etc/terminfo;export TERM=linux;export HOME=/sdcard;
and finally
Code:
adb push bashrc /sdcard
adb shell
mv /sdcard/bashrc /sdcard/.bashrc
exit
nano works just fine via ADB, but because of lack of 'ctrl' key (and physical buttons to assign it to) you won't be able to write files (ctrl+o) using the terminal on your nook. But between having full proper root access, busybox, a proper bash terminal emulator and nano for editing config files, this should REALLY extend the usefulness of your Nook Glowlight. It should work just fine on other versions of Nook too.
Hi N00b-un-2,
Many thanks for your summary!
There is one important edit that I think you missed,
in init.rc you also need to:
Line #375, comment out "disabled" with a # at the start of the line.
(see http://forum.xda-developers.com/showthread.php?p=49070213#post49070213)
without this I couldn't get adb to connect.
And since you already made it very noob friendly, might I suggested you clarify:
Line #215 remove # to enable adb over wifi
(rather than search for 5555)
Also, I'm not expert, but I believe the commands to get superuser on the device are (at least it worked for me):
adb connect 192.168.x.x
adb shell mount -o remount, rw /system
adb push su /system/bin/
adb shell chmod 6755 /system/bin/su
adb install superuser.apk
Finally, I'm not sure if this is important, but maybe remount system as read only again:
adb shell mount -o remount, ro /system
Thanks again, nice work!
---------- Post added at 01:48 PM ---------- Previous post was at 01:10 PM ----------
Hi again,
had similar issues with installing busybox, here's what worked for me (note needed to run su to create dir):
adb shell mount -o remount, rw /system
adb shell /system/bin/su
adb shell mkdir -p /system/xbin
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
cheers.
As far as remounting /system as ro, I would HIGHLY recommend just rebooting at this point, otherwise your nook might be stuck in a weird pseudo-rooted state. Probably won't cause any problems, but why risk it?
Thanks for clarifying the line number. I will make the appropriate edits to my instructions. I was working off the top of my head and couldn't remember what exact line the ADB over TCP config was, as I just used ctrl+w '5555' to find it myself.
There are several pre-edited uRamdisk images floating around the forum with various features enabled which would be easier for noobs than extracting the config files and manually editing and then repacking them. In the future I'll probably throw those on here as well.
darz said:
Hi N00b-un-2,
Many thanks for your summary!
There is one important edit that I think you missed,
in init.rc you also need to:
Line #375, comment out "disabled" with a # at the start of the line.
(see http://forum.xda-developers.com/showthread.php?p=49070213#post49070213)
without this I couldn't get adb to connect.
And since you already made it very noob friendly, might I suggested you clarify:
Line #215 remove # to enable adb over wifi
(rather than search for 5555)
Also, I'm not expert, but I believe the commands to get superuser on the device are (at least it worked for me):
adb connect 192.168.x.x
adb shell mount -o remount, rw /system
adb push su /system/bin/
adb shell chmod 6755 /system/bin/su
adb install superuser.apk
Finally, I'm not sure if this is important, but maybe remount system as read only again:
adb shell mount -o remount, ro /system
Thanks again, nice work!
---------- Post added at 01:48 PM ---------- Previous post was at 01:10 PM ----------
Hi again,
had similar issues with installing busybox, here's what worked for me (note needed to run su to create dir):
adb shell mount -o remount, rw /system
adb shell /system/bin/su
adb shell mkdir -p /system/xbin
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
cheers.
Click to expand...
Click to collapse
N00b-un-2 said:
There are several pre-edited uRamdisk images floating around the forum with various features enabled which would be easier for noobs than extracting the config files and manually editing and then repacking them. In the future I'll probably throw those on here as well.
Click to expand...
Click to collapse
Would have been good if I could have easily found a pre-edited image, but your instructions were a great alternative, thanks again
darz said:
Would have been good if I could have easily found a pre-edited image, but your instructions were a great alternative, thanks again
Click to expand...
Click to collapse
Sorry for the really noob question, I have rooted, wifi adb running and installed apps as per your instructions, but I can't seem to access any of it on the nook. How can I get access to the launcher I installed?
You mentioned pre-edited images, do any of those come with the apps I need to get access to a custom launcher?
Cheers,
Dariusz
==============
Updated: All sorted
==============
For some reason had some issues with ADW launcher, Launcher pro worked fine.
ps I think I made a mistake with the su step I suggested, if you run a one line shell command I don't think it keeps su privileges, so I believe you need to run commands within the shell as per below:
adb shell
mount -o remount, rw /system
/system/bin/su
mkdir -p /system/xbin
exit
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
Noob
Hey guys any instructions noob friendly or a video in youtube,i stick up at dab connect 192.168.0.10.I dos't have a Windows PC and using Mac whit Parallels Desktop.Is it possible instructions for Mac?
The above instructions from N00b-un-2 should work fine running a vm with parallels on your Mac.
OB
Sent from my SPH-D710VMUB using Tapatalk 2
valentin1985 said:
Hey guys any instructions noob friendly or a video in youtube,i stick up at dab connect 192.168.0.10.I dos't have a Windows PC and using Mac whit Parallels Desktop.Is it possible instructions for Mac?
Click to expand...
Click to collapse
Before you perform the adb connect step you need to find out what your IP address is:
On your nook, click on the settings icon in the top right corner and then select "Change"
Under Wireless Networks, select the wifi name that you are already connected to (where it says "Connected to the internet")
This will display your connection details, remember that IP address
Now go back to your pc and type:
adb connect [IP address]
darz said:
Before you perform the adb connect step you need to find out what your IP address is:
On your nook, click on the settings icon in the top right corner and then select "Change"
Under Wireless Networks, select the wifi name that you are already connected to (where it says "Connected to the internet")
This will display your connection details, remember that IP address
Now go back to your pc and type:
adb connect [IP address]
Click to expand...
Click to collapse
BIG HINT! If you're using Powershell ISE, you have to type .\adb.exe connect [IP address] or else it won't recognize "adb" as an executable!
Don't ask why, because I don't know. :?
thenookieforlife3 said:
BIG HINT! If you're using Powershell ISE, you have to type .\adb.exe connect [IP address] or else it won't recognize "adb" as an executable!
Don't ask why, because I don't know. :?
Click to expand...
Click to collapse
So far so good,but now what?
valentin1985 said:
So far so good,but now what?
Click to expand...
Click to collapse
I just gave a little tip on Powershell ISE. I do not know much about the Nook GlowLight rooting process, as I have a NSTG, not a NG. Ask someone else.
thenookieforlife3 said:
I just gave a little tip on Powershell ISE. I do not know much about the Nook GlowLight rooting process, as I have a NSTG, not a NG. Ask someone else.
Click to expand...
Click to collapse
Yes,i try whit dis command .\adb.exe connect 192.168.0.9 but result is the same.
valentin1985 said:
Yes,i try whit dis command .\adb.exe connect 192.168.0.9 but result is the same.
Click to expand...
Click to collapse
But that's okay! What I said was, if you are using the command program Powershell ISE, do it that way instead. But you are just using cmd.exe, not Powershell ISE!
In cmd.exe, which is what you are using, it is not neccessary to type .\adb.exe. Just type adb.
From there, ask someone else in this thread.
thenookieforlife3 said:
But that's okay! What I said was, if you are using the command program Powershell ISE, do it that way instead. But you are just using cmd.exe, not Powershell ISE!
In cmd.exe, which is what you are using, it is not neccessary to type .\adb.exe. Just type adb.
From there, ask someone else in this thread.
Click to expand...
Click to collapse
I prefer to use ConEmu or Console2 when I am forced to use Windows. Not a big fan of CMD.EXE or Powershell/PowershellISE. there are plenty of other CLI alternatives out there
N00b-un-2 said:
I prefer to use ConEmu or Console2 when I am forced to use Windows. Not a big fan of CMD.EXE or Powershell/PowershellISE. there are plenty of other CLI alternatives out there
Click to expand...
Click to collapse
Well, as I ONLY use Windows and Powershell ISE has a nice-enough layout for my purposes, I use it. That's why I gave a tip on it.
Actually on a lot of installs just typing adb in the command console won't work either unless it's got the path variable set up correctly, I find it easiest to just right click and choose run as administrator, no need for the path to be setup.
OB
Sent from my SPH-D710VMUB using Tapatalk 2
FW 1.2.1
Hi guys,
thanks for creating this thread. I was wondering if this rooting procedure was tested with the firmware 1.2.1 ?
real-6 said:
Hi guys,
thanks for creating this thread. I was wondering if this rooting procedure was tested with the firmware 1.2.1 ?
Click to expand...
Click to collapse
This rooting procedure is for the new Nook GlowLight with firmware 1.3.1. Your device is a Nook Simple Touch with GlowLight, which can be rooted very easily using the rooting package here.