Database Users

Freezing issue while flashing stupidfast kernels

Im having an unusual problem when i flash any of the Stupidfast kernels, right now I am on the test version of v1.0.36, i tried to flash the stable version as well as the UV kernel and the v1.1.4. When i tried to flash the stable version i was able to boot up fine but i have an issue where it freezes when my media scanner runs and the only remedy is to do a battery pull. the same thing happened when I tried the UV kernel, I think my phone doesnt like UV kernels anyways so im not too concerned with that one, I am running setcpu with min at 100 and max 1000 on conservative. Im just curious if any one else had has this issue with the freezing. Any help would be appreciated!

civicr6 said:
Im having an unusual problem when i flash any of the Stupidfast kernels, right now I am on the test version of v1.0.36, i tried to flash the stable version as well as the UV kernel and the v1.1.4. When i tried to flash the stable version i was able to boot up fine but i have an issue where it freezes when my media scanner runs and the only remedy is to do a battery pull. the same thing happened when I tried the UV kernel, I think my phone doesnt like UV kernels anyways so im not too concerned with that one, I am running setcpu with min at 100 and max 1000 on conservative. Im just curious if any one else had has this issue with the freezing. Any help would be appreciated!
Click to expand...
Click to collapse
I'm having the same problem. But only when I plug in USB while media scanner is running. I'm using the most recent stupidfast kernel 1.2.3. I have to wait until the media scanner is done then plug in the USB, but have to be patient. If I try to do too much too fast..... freeze.

I wish thats all i had to deal with, i dont even touch my phone and it freezes all on its won, and for some reason my media scanner runs twice, and its always on the 2nd time when it freezes.

My phone always ran media scanner twice, before root and now, have u tried wiping ur phone reinstalling kernel and rom and then use titanium to restore apps?
Sent from my SCH-I500 using Tapatalk

I have done a full wipe on my phone and it is still doing it, maybe my phone doesnt like being played with ha ha. im not running any rom, just root and a kernel

Problem with user and the RyanZA OCLF

OK so here is were I sound stupid (I think).
I had eclair and the lag fix and wanted to upgrade to froyo.
I undid the lag fix and upgraded. WOW how bad was Froyo!!!
So I installed the OCLF, big difference, but still getting loads of issues with FC and the like.
So decided to do a factory reset. BUT I believe I forgot to remove the OCLF. Boo Hiss.
So reset fine. Phone running great. Start to load it up with apps and heay presto starts to lag again.
Fine install the lag fix.
Cannot as playlogos1 is there and it means that a lag fix is still running.
So google is my friend and found you could just remove it.
Routed around allot and what I found was
mount -o rw,\system \system
chmod 755 \system\bin\playlogo*
then change the files name. To something not playlogos1 (i.e. playlogos1bk)
Heay presto it worked. installed the ext2 stuff then the OCLF. Then reboot
reboot
reboot
reboot
get the picture......
Lucky I have one of the phones that the 3 button combo did not work on, which I found the wonderful fix for just before this happened. So I could get the console and select factory reset again.
So I looked some more and found the following
Playlogo
Playlogos1
Playlogosnow
Google pointed me to the fact that the file oover 5kb = the animation file the other two are OCLF files (ish). So I changed the following
Playlogo = Playlogobk
Playlogos1 = Playlogos1bk
Playlogosnow = Playlogo
Tried again same problem. Now I think, think is all that the animation file is there some where and I am moving the playlogos files around which is the problem. I think that one of these files is holding the info from the OCLF I forgot to uninstall and that when I hit reboot after actioning the OCLF again it is getting rerouted and the phone is having a fit hence why it keeps crashing when I apply it.
My question is this. HHHHHHHEEEEEEELLLLLLLLLPPPPPPPP. I have lost my animation screen and don't know where it has gone and I would love to apply the lag fix again. BUT how???

Skip that one click lag fix and install a rom that has either the voodoo or ulf lagfix built in.

Sounds great but all of the rims I've seen say make sure you have removed any other lag fixes. If I flash a new rom with remnants of the OCLF won't this ruin my phone competently?
Sent from my GT-I9000 using XDA App

Flash back to a stock rom using odin with repartition, this should sort out any problems, then install a new rom. I always go for jp7 with 512 pit and repartition, no matter what errors or problems I have had in the past this always brings my phone back to life. It can sometimes get stuck on the first boot, when it does this I just reflash jp7 without pit or repartition and it works. I must have flashed my sgs in excess of 50 times since I've had it and this method never lets me down. I try to always make sure that I disable lagfix before hand, but sometimes I have got over excited and forgotten and never had any problems
If I had to recommend I would suggest that after flashing it back to stock you go straight for one of the jpu roms and give it a go without the lagfix, mine has about 80 apps installed, has been running 3 days without a shut down and is still running nice

I know a simple search is what's needed, but could you post a link to a recommended one? There are just a few results for flashing a new rom.
Sent from my GT-I9000 using XDA App

look for jp7 here (hint October)
there you have most stock ROMs it seems

There are some good guides on here:
http://forum.xda-developers.com/showthread.php?t=814091
You don't have to flash darkys rom afterwards, once the phone is back to stock flash what you like

scottietohottie said:
OK so here is were I sound stupid (I think).
I had eclair and the lag fix and wanted to upgrade to froyo.
I undid the lag fix and upgraded. WOW how bad was Froyo!!!
So I installed the OCLF, big difference, but still getting loads of issues with FC and the like.
So decided to do a factory reset. BUT I believe I forgot to remove the OCLF. Boo Hiss.
So reset fine. Phone running great. Start to load it up with apps and heay presto starts to lag again.
Fine install the lag fix.
Cannot as playlogos1 is there and it means that a lag fix is still running.
So google is my friend and found you could just remove it.
Routed around allot and what I found was
mount -o rw,\system \system
chmod 755 \system\bin\playlogo*
then change the files name. To something not playlogos1 (i.e. playlogos1bk)
Heay presto it worked. installed the ext2 stuff then the OCLF. Then reboot
reboot
reboot
reboot
get the picture......
Lucky I have one of the phones that the 3 button combo did not work on, which I found the wonderful fix for just before this happened. So I could get the console and select factory reset again.
So I looked some more and found the following
Playlogo
Playlogos1
Playlogosnow
Google pointed me to the fact that the file oover 5kb = the animation file the other two are OCLF files (ish). So I changed the following
Playlogo = Playlogobk
Playlogos1 = Playlogos1bk
Playlogosnow = Playlogo
Tried again same problem. Now I think, think is all that the animation file is there some where and I am moving the playlogos files around which is the problem. I think that one of these files is holding the info from the OCLF I forgot to uninstall and that when I hit reboot after actioning the OCLF again it is getting rerouted and the phone is having a fit hence why it keeps crashing when I apply it.
My question is this. HHHHHHHEEEEEEELLLLLLLLLPPPPPPPP. I have lost my animation screen and don't know where it has gone and I would love to apply the lag fix again. BUT how???
Click to expand...
Click to collapse
Mate, just send Ryan an email - he's always very helpful. With snags like that, I wouldn't go aimlessly trying other peoples fixes .
Sent from my GT-I9000 using XDA App

woolf clubs said:
Mate, just send Ryan an email - he's always very helpful. With snags like that, I wouldn't go aimlessly trying other peoples fixes .
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I have similar issues. Have been exchanging nemerous mails with Ryan but he has been silent for last two days after I sent all screen shots. Please let me know if you hear from you.
Thanks in advance
Alok

Opps .. please let me know if you hear from Ryan

woolf clubs said:
Mate, just send Ryan an email - he's always very helpful. With snags like that, I wouldn't go aimlessly trying other peoples fixes .
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
and how would I find his email address? Also if I did do a stock re-flash, am I right in saying it would put the phone back to fresh install. I mean does it wipe all data and install new or will there still be traces.

AsgardCurse said:
look for jp7 here (hint October)
there you have most stock ROMs it seems
Click to expand...
Click to collapse
so I have gone to flash my phone and looked at all the how tos, read so much feel like a book on the subject. So I hit up the link above and there is no phone file????? Any ideas where to get it. searched and searched. My phone says
PDA : I9000XXJPO
Phone : I9000XXJPP
CSC : I9000OXAJPO
Build Info : 2010.10
So on the link above I found the PDA and the CSC, no Phone. Where do I get it?

Not sure if this is too late to be useful but I had a similar problem. Did a factory reset without removing the OCLF and I couldn't get rid of the remnants of it. All I had to do was use the restore boot animation option provided in the OCLF app and everything was fine. Think the boot animation thingo was all that was left behind after the factory reset.

scottietohottie said:
so I have gone to flash my phone and looked at all the how tos, read so much feel like a book on the subject. So I hit up the link above and there is no phone file????? Any ideas where to get it. searched and searched. My phone says
PDA : I9000XXJPO
Phone : I9000XXJPP
CSC : I9000OXAJPO
Build Info : 2010.10
So on the link above I found the PDA and the CSC, no Phone. Where do I get it?
Click to expand...
Click to collapse
Try Darky's v6.0 Gingerbread Edition ★ JPX ★ // - Remastered by Darky from:
http://forum.xda-developers.com/showthread.php?t=814091
It is awesome. My phone is like a brand new phone that is blazing fast & no FCs

eecan said:
Not sure if this is too late to be useful but I had a similar problem. Did a factory reset without removing the OCLF and I couldn't get rid of the remnants of it. All I had to do was use the restore boot animation option provided in the OCLF app and everything was fine. Think the boot animation thingo was all that was left behind after the factory reset.
Click to expand...
Click to collapse
It is not clear if you were able to run lagfix after restoring Boot Animation. I tried & got errors. Eventually went ahead & flashed my ROM with Darky's v6.0 Gingerbread Edition ★ JPX ★ // - Remastered by Darky from:
http://forum.xda-developers.com/showthread.php?t=814091
It is awesome. My phone is like a brand new phone that is blazing fast & no FCs

So, as you can gather I love to tinker but don't like to muck it up. I read loads. Tried the restore boot animation and everything.
My problem is/was I know some code. Not a lot but enough to be dangerous. So I installed terminal emulator and tinkered. And then buggered. As the first post suggests.
After looking and looking decided to give the kies reg hack a go. That way I could then feign ignorance under warranty. Worked a charm. My phone is 300 better on a benchmark and no fc's yet.
For my two cents. Read read read read, then, do you know what read again. If you don't know, ask, if you think you know, ask. Pride will not replace a £500 phone. Or the time it takes to fix it. I thought it was straight forward look what happened there!
Sent from my GT-I9000 using XDA App

stable ROM pls???

hi all,
im new here and i would like to ask for a link for the most stable and fast ROM... i know many of members here already posted this kind of request and i've read some of them but still i think chose the wrong one.. i tried to install the floyo ROM on my x8 last week... on the first two days its ok... but when i tested the wifi, the browser is malfunctioning so i tried to reboot the phone... after that, the system suddenly crashed and some of the apps like launcher failed to initialize... i can't even see the menu that time and the phone always displays the "force close the application"... i thought that i will not be able to use my phone again but thanks to flash tool which i also got here...
i also want a ROM with multi touch... and please the most stable.... if there are some tips and reminders in using custom ROM's to minimize this errors that i've experience please give me a list... i still need a lot of info in modifying my x8... thanks guys!!!

Nearly all 2.2 ROMs are stable, and if you want Gingerbread, use GingerDX or MiniCM7 (I´d recommend you GingerDX).
You can also use KuyaDroid, but I did never use it and so, I don´t really know how fast and stable it is.
All those three have a fully working camera.

My tip is that you do a full wipe before installing ANY new ROM, to avoid those errors you had.
Like codfreak, I also recommend you GingerDX 010, very stable and fast.
If you are lucky to have a Cypress digitizer on your X8 you will get multiTouch.

This is my recommendation
Froyo/cm6:Froyobread because is Final
Gingerbread/cm7:GingerDX is most stable cm7 for daily use
More description Here

Froyobread most stable rom ..or u can also try floyo 0.30 ..its stable as well..atleast for me..

I think the GingerDX v.6 i currently use on my phone is very stable. I know v.10 is out there but right now im to lazy to do a full wipe and so on. The only problem i had was when i first did the installation from stock 2.1. to GingerDX v.6. I did not do a full wipe before the installation and the phone did hang at the CM logo.. I rebooted and did a full wipe. Since then the phone has been rock solid. Everything i have tried on my phone works. One minor bug is that when the battery is realy empty (as in: the phone closes itself) the X8 recovery comes up the next time the phone is started. When i do a reboot in the recovery-program a "master pin code"- question is popping up. I just click never ask for this again or something like that and after that everything is fine..
I´m very happy with the GingerDX!

tripaX8 said:
My tip is that you do a full wipe before installing ANY new ROM, to avoid those errors you had.
Like codfreak, I also recommend you GingerDX 010, very stable and fast.
If you are lucky to have a Cypress digitizer on your X8 you will get multiTouch.
Click to expand...
Click to collapse
Hi... i have a new problem... i updated my phone yesterday using pc companion to restore its original ROM because it was bricked last week... then i rooted it and installed the busybox, root folder and xRecovery.. i wanted to test this "STABLE ROM" on my x8..
http://forum.xda-developers.com/showthread.php?t=1036335
so i installed it using xRecovery.... i tested everything and it was great... i installed some app and games on it and tried to transfer the installation using app manager to save some phone memory... i also installed the launcher pro...
i reboot the phone to see if the xrecovery is working for backup if ever i encounter an error again using the ROM... and its working...
the last thing that i did was testing its wifi... its already in obtaining ip status... but its always disconnecting and after several disconnection, the phone reboot and suddenly its showed a message that "the application DSPmanager has stopped unexpectedly" (can't remember the exact message) and telling me to "force close" it... i rebooted the phone several times but it always shows that message... so i tried to access the xRecovery but it doesnt appear and i tried it many times....
is there something wrong on my installation process?? or this is just a bug of that ROM??? i've read some feedbacks on that thread but i didn't see a wifi problem on others and "the application DSPmanager has stopped unexpectedly"...
i just dont know why can't i access the xRecovery... PLease Help me T_T]
Thanks a lot for the feedbacks guys!!!

for me, the stable rom is minicm, it's standard
but i like feature on GDX/Froyobread

Hi mikel_0004 If you still can boot your phone, why don't you re-install xRecovery? and then restore a backup...
If your ROM was working BEFORE you started installing apps, then the problem should be some app you installed OR uninstalled, Did you uninstall any system app?
...tried to "transfer the installation" using app manager to save some phone memory...
Click to expand...
Click to collapse
are you talking about SystemAppRemover ? what did you "transfer" ?
About DSP manager, you can safely delete that app from /system/app with root explorer. (I read it has problems if you are using kickass module)

@mikel_0004:
If you have your ROM's backup, you can try to flash back to stock ROM, re-root and re-install xRecovery. after that, restore your backup.

[Q] Problems with GT540 roms

Hello, I recently have bought gt540. Everything was fine, but then I thought about upgrading android. I upgraded it and the problems started. With Andriod 2.1 my started to have various programs' crashes, so I installed france orange rom v20c for fastboot, flashed recovery and etc. Now the thing is my phone has crashes on custom roms too. even on Utopia and full froyo rom by MikeGapinski. Sometimes my phone don't even boot up at all, then ai took of the battery and turn it on once again. Sometimes when it boots up there is no crashes but there s some apps , too. For example sometimes market dissapperas. What can cause this problem? I know it can be because of kernel. I want to hear possible ways to solve this problem. Maybe it would help if I install stock 1.6 rom via KDZ updater and then install custom rom? And one more thing it won't boot up with v20c (or v20b) it stucks at android screen.
Thank you all in advance.

You cant go back to 1.6 now.....don't try to you will brick your cell.
Sent from my GT540 using xda premium

I turned phone i booted up, everything looks works, expect, the market sometimes crashes ( because it loads up very slowly) and other thing programs won't install i tried Angry birds, and some other games ( which don't require for multi-touch) an i tried install some apps (quick settings, google maps) and they won't install,too. Although programs and games were downloaded successfully. Any ideas? After unsuccessful installing it says that package is wrong.

almiukask said:
I turned phone i booted up, everything looks works, expect, the market sometimes crashes ( because it loads up very slowly) and other thing programs won't install i tried Angry birds, and some other games ( which don't require for multi-touch) an i tried install some apps (quick settings, google maps) and they won't install,too. Although programs and games were downloaded successfully. Any ideas? After unsuccessful installing it says that package is wrong.
Click to expand...
Click to collapse
did you do a factory reset ?

After factory I got to the starting point, it hardly boot ups, if boot ups there are crashes. Could this be caused by that my phone as I suspect was not from baltic region and i installed update for Lithuania's location?

hmm that does no matter i live in Asia and i used the European version

I knew that it doesn't matter (on lg p500) but I thought:'Maybe there is a difference on gt540' So what could it be? Could this be because of bad fastboot.exe? I really don't know if the fastboot.exe witch i have is good ( it does the job, but maybe there are bugs in it)

I tried install Synergy rom (for old recovery) it started fine but it says it can't find xbin/cksum, this is the only rom which installs from recovery normally ( others jus t takes 5s... this one is copying files normally) So can anyone provide me rom for old recovery ? or maybe new fastboot.exe would be fine, too.
P.S.now i'm using CWM recovery v2.5.1.8

almiukask said:
I tried install Synergy rom (for old recovery) it started fine but it says it can't find xbin/cksum, this is the only rom which installs from recovery normally ( others jus t takes 5s... this one is copying files normally) So can anyone provide me rom for old recovery ? or maybe new fastboot.exe would be fine, too.
P.S.now i'm using CWM recovery v2.5.1.8
Click to expand...
Click to collapse
You can install any rom with this recovery....
Sent from my GT540 using xda premium

But not all of roms I've tried installed correctly, some of them installs in 5-10s, others won't install, because there is some kind of error and how i end up with recovery saying : aborted.

you can try to flash 2.1 europian+fastboot and then to reflash mur4iks 2.3 but dont blame me if u brick phone :O this is just sugestion..
sent using Miroslav_mm SSL

this will do just flash with recovery 2.5.1.8 ...
http://forum.xda-developers.com/showthread.php?t=1029459

It didn't work. I installed v20c france (orange) it seems to work, but sometimes it could be not stable (for example crash or rebooting). Maybe this related to cpu? Maybe it is overheating or smoething?

I think its not a problem with the cpu. The cpu runs with stock configs.
Try to flash the 2.1 + fastboot and then flash a 2.3 rom.
Gesendet von meinem GT540 mit Tapatalk

I mananged to install swift droid 2.3 from 2.1 (stock france orange rom) And there are some problems. I go to the market pick up game, it starts downloading it, after it finishes downloading, I get error :'downlaoding was unsuccessful, please try again'. I somehow installed Ninja chicken, and after all tuts in the game, you should be transferred and play, but that doesn't happen, I get that game turned off by itself. So what the problem? Is it really not cpu? Maybe something with cache?

hmmm ok er wipe data cache and try again?

I'm getting error abou downlaoding progrms... dunno why. Does my phone really don't support angry birds ?
EDIT: I am able to paly ninja chicken. Mostly this error is on the apps whick are larger than 8MB or something.

try to get an vending.apk from another rom and install it or downgrade yours.
i think its an market problem.

sain1980 said:
try to get an vending.apk from another rom and install it or downgrade yours.
i think its an market problem.
Click to expand...
Click to collapse
I tried installing vending.apk from SD after installatio progress it's written application not installed. Maybe try to flash whole gapps? I have gapps-gb-20110828-signed.zip I have this because It was needed on my optimus one( i don;t remember the rom) But i suppode this package would fit. Right?

can you test some other roms? like SDSL 1.1 or lewa os?
last option ist to reflash from the begining whit kdz etc...
what version is cwm?
greetz

CM9/CM10 UNOFFICIAL Ice Cream Sandwich/ Jelly Bean for Legend

Check progress in DEV section http://forum.xda-developers.com/showthread.php?t=1562595

( I have posted less than 10 posts, so I can't write in the dev section. )
Stupid question : is it using Holo?
And, if it is based on CM9, it is rooted, isn't it?
If WiFi works, I'm SURELY going to try this!

I installed it yesterday. Wifi works, it uses Holo, hat root and performs better than I expected.

Thx.
I' ve put it on. It's really laggy, but it works!
It's a good start, but if this is the best performance the legend can give, I think I won't ever change definitevly to ICS. Maybe it can be optimizated for the Legend hardware to become smoother.

Thanks for testing, but it has not got hardware acceleration yet. For testing purpose, you could overclock it up to 787 MHZ safely, and the overall performance get better notably.
/=\lex said:
Thx.
I' ve put it on. It's really laggy, but it works!
It's a good start, but if this is the best performance the legend can give, I think I won't ever change definitevly to ICS. Maybe it can be optimizated for the Legend hardware to become smoother.
Click to expand...
Click to collapse

Yea is pretty smooth overall eventhough hardware aceleration is not working, this port looks really promising,

Tried it yesterday and in My view its the smoothest ics ROM ever tested.i had some fcs but will try Tor correct rights via rommanager.if GPS is working i will use this one.its a must Have for me.
Sent from my Legend using XDA

Thanks for testing, but it has not got hardware acceleration yet. For testing purpose, you could overclock it up to 787 MHZ safely, and the overall performance get better notably.
Click to expand...
Click to collapse
I'll try keeping it on for more time. By my first impression, it doesn't look so buggy, I think it is also quite stable. I'll tell you if I find anything.
Anyway, this is a great ROM, thanks for your work!
EDIT : Stupid question : to install GApps I have to flash the zip, right?
EDIT 2x : Yea, it was a very stupid question. Flashed from clockwork recovery. Works perfectly.

Its getting better and better. but still GPS not working. Hope you get it fixed soon.
Realy great job!!!!!

really good job. Just need GPS and Camera.
Hoping for 2.5 soon...also hoping based on Android 4.0.4.

How is work going?
Sent from my Legend using XDA

I have a problem with the latest 3.0 version.
After i flash gapps i keep getting boot loops.
If i dont flash it and just flash the rom it boots fine.
Dont know what the problem is. Can someone help me?

I have the exact same problem as DareFace, but I think zeubea is aware of the problem.

zeubea-cm-9.0.0-ALPHA3.0.1 and Google Apps
I tried install this ROM multiple times today, everything works until i install gapps (full or tiny). After that phone enters infinite boot-loop (HTC logo on white background).
Radio 7.13.35.05
Bootloader HBOOT-1.01 (S-ON)
ClockworkMod Recovery 5.0.2.0
Edited @ 08:31PM GMT+2
After installing gapps over gapps works as a charm. That's weird...

I had the same bootloop problem until I installed another kernel that Zeubea provided. It's till get some fc's, mainly for clock and email, but the email still works, clock is inaccessible atm.
It's even better than cm 7.2RC1, running oc'ed at 787mhz ! It's so smooth and beautiful. Let's hope that the gps and camera will get fixed soon. If I had capabilities to donate, I so would do it.
Thanks Zeubea! The Legend community loves you, keep up the wonderful work of making our ICS dreams come true when htc can't and won't deliver.

The reason for bootlooping is the clock issue.
The default clock in 3.0.0 is 806MHz - something every Legend doesn't handle, so it bootloops.
The 3.0.1 version has this "problem" fixed.

I faced another issue releted to sounds. I change both ring and notification sounds and after some time i realise that they are reverted to default!

I have this weird thing where the danish keyboard force-closes.
It's everytime i type the word "lige". It doesn't do it with the english keyboard
I've tried to turn off the spelling correction, since it's in english, and there isn't a danish one, but it doesn't help.
Other than that it's great

bootlooping after flashing cm9 gapps, possible fix
boots up normally after flashing the zip in CWM, but after flashing gapps it bootloops, and after awhile of countless flashing i discovered it bootloops even before flashing gapps, so i tried different step to flash it and finally it boots up normally, here's what i did :
1) full wipe, dalvik cache and cache partition, factory reset
2) flash the main cm9 zip
3) full wipe, dalvik cache and cache partition, factory reset (again)
4) flash gapps (not tiny version)
5) reboot, if it boots up normally thats great, if not its ok, continue to step 6
6) boot into CWM
7) dont wipe or anything*
8) flash the main cm9 zip
9) instead of rebooting device, continue by just flashing gapps (not tiny version)
this were the steps i did to fix the bootloops after flashing gapps, apparently the gapps tiny version is not compatible with cm9 on the htc legend thats why i stick to the normal gapps file, i hope this helps anyone of u experiencing the bootloops after flashing gapps

I have some kind of problem with wifi connection. If "Keep Wi-Fi on during sleep" is set to "Only when plugged in". After I wake up phone wifi is turned on it cannot find any networks.
EDIT: Logcat trimmed to "network|wifi|power|conectivity" http://pastebin.com/pdUAbfDy
And terminal emulator displays an error "Unfortunately, Terminal Emulator has stopped" when I try to open it.
EDIT: Logcat http://pastebin.com/ChRUu3jS