So I have searched high and low and haven't had any luck finding any information about tethering the TF to a WM6.5 device. I am currently using a stock Touch Pro 2. When I pair the two devices together, under the BT settings on the TF there are no profiles listed. When I try to set up a network with the phone using "Share Internet Connection," I get the error message saying "Failed to establish internet sharing connection to remote device as it supports only Network Access Point (NAP) mode."
If anybody could shed some light on how I could actually get the the TF to tether with my phone, that would be greatly appreciated!
I have a Tilt2 running energy rom, normally i'd run wifi-router then all is well.
Apparently the Transformer doesn't accept AD-HOC and idk when it will be supported. The only way i can tether through wifi was to install FRX06 android.
Here's a link
http://forum.xda-developers.com/showthread.php?t=951962
Once you get to run android on your TP2 go to Settings -> Wireless and Networks -> Tethering & portable hotspot -> check the portable wi-fi hotspot box. You may add a passcode if you want but it will be defaulted to Open.
I've tried it and it works! Good luck!
dogmaxi said:
I have a Tilt2 running energy rom, normally i'd run wifi-router then all is well.
Apparently the Transformer doesn't accept AD-HOC and idk when it will be supported. The only way i can tether through wifi was to install FRX06 android.
Here's a link
http://forum.xda-developers.com/showthread.php?t=951962
Once you get to run android on your TP2 go to Settings -> Wireless and Networks -> Tethering & portable hotspot -> check the portable wi-fi hotspot box. You may add a passcode if you want but it will be defaulted to Open.
I've tried it and it works! Good luck!
Click to expand...
Click to collapse
+1 This is the only way you can get it to work on the phone side that I can find. Works flawlessly.
Transformer wont see 6.5 tether unless you root it.
Sent from my Transformer TF101 using XDA Premium App
Works fine for me, but slightly counter-intuitive. Firstly I paired the Phone and Transformer:
1. Set Phone to discoverable
2. Scan for devices on TF
Secondly, run Internet Sharing App (its in the tools folder on my WM6.5)
Select Bluetooth PAN instead of USB from the top dropdown and hit Connect
Now on the TF, selecting the Phone from the bluetooth settings should tether you
No rooting or modding of the TF required. Note this is Bluetooth tethering, not WiFi which doesn't work as WM6.5 WiFi tethering is Ad-Hoc, whci TF does not support without root and mod
eeit232 said:
Works fine for me, but slightly counter-intuitive. Firstly I paired the Phone and Transformer:
1. Set Phone to discoverable
2. Scan for devices on TF
Secondly, run Internet Sharing App (its in the tools folder on my WM6.5)
Select Bluetooth PAN instead of USB from the top dropdown and hit Connect
Now on the TF, selecting the Phone from the bluetooth settings should tether you
No rooting or modding of the TF required. Note this is Bluetooth tethering, not WiFi which doesn't work as WM6.5 WiFi tethering is Ad-Hoc, whci TF does not support without root and mod
Click to expand...
Click to collapse
Hi!
What version of Energy Rom are you using? for some reason i can only see USB on the dropdown, no Bluetooth. This is the internet sharing program.
eeit232 said:
Works fine for me, but slightly counter-intuitive. Firstly I paired the Phone and Transformer:
1. Set Phone to discoverable
2. Scan for devices on TF
Secondly, run Internet Sharing App (its in the tools folder on my WM6.5)
Select Bluetooth PAN instead of USB from the top dropdown and hit Connect
Now on the TF, selecting the Phone from the bluetooth settings should tether you
No rooting or modding of the TF required. Note this is Bluetooth tethering, not WiFi which doesn't work as WM6.5 WiFi tethering is Ad-Hoc, whci TF does not support without root and mod
Click to expand...
Click to collapse
I tried this method, but for some reason it still doesn't work. On the phone it says the following.
"Failed to establish Internet Sharing connection to remote device as it supports only Network Access Point (NAP) mode"
Also on the TF it still shows no profiles available with the phone. From what I have read in the forum is that the Touch Pro 2 is using the Broadcom Bluetooth stack and it doesn't' play very nice with other devices.
eeit232 said:
Works fine for me, but slightly counter-intuitive. Firstly I paired the Phone and Transformer:
1. Set Phone to discoverable
2. Scan for devices on TF
Secondly, run Internet Sharing App (its in the tools folder on my WM6.5)
Select Bluetooth PAN instead of USB from the top dropdown and hit Connect
Now on the TF, selecting the Phone from the bluetooth settings should tether you
No rooting or modding of the TF required. Note this is Bluetooth tethering, not WiFi which doesn't work as WM6.5 WiFi tethering is Ad-Hoc, whci TF does not support without root and mod
Click to expand...
Click to collapse
Which phone do you have? I have the same exact problem asthe OP using my Sprint TP2. I dont see Bluetooth PAN option in my TP2.
I was informed that if even our 6.5 devices would have that option to have bluetooth PAN active, our Transformers doesn't support DUN. Basically, it would be pointless to get internet through this bluetooth method Only thing that will happen is that we can share files with our WM 6.5 devices with our Transformer.
I have Omnia 2 running WM 6.5 using wmwifirouter (use trial version first). Launch using 3G BT, then under options - tools - Bluetooth - Swithch mode to PAN, then switch to discoverable.
Connects great - not the fastest, but I'll wait until we can have ad-hoc work or until I learn more about rooting.
i was able to to do blue tooth tether of Treo Pro 6.5 (raiderfan rom) Ill try it again once i get home and post details (in case it helps anyone)
mt TP2 screen broke and currently on my palm centro...(yes,,go ahead and laugh..haha)
might connect my tp2 just to try the tether. that phone is on a ENergy ROm
dogmaxi said:
Hi!
What version of Energy Rom are you using? for some reason i can only see USB on the dropdown, no Bluetooth. This is the internet sharing program.
Click to expand...
Click to collapse
this is exactly what i did on the treo pro
dogmaxi said:
Hi!
What version of Energy Rom are you using? for some reason i can only see USB on the dropdown, no Bluetooth. This is the internet sharing program.
Click to expand...
Click to collapse
Not using Energy ROM, running stock HTC WM6.5 on a Touch Diamond 2. If you don't get Bluetooth PAN in your drop-down I guess your ROM does not support it
Aye, Not only the Rom, but the device itself on wmwifirouter
http://support.wmwifirouter.com/devices/
HTC Touch Pro 2
AT&T Tilt 2
HTC Rhodium
Sprint Touch Pro 2
Support from version 1.50. Sharing using Bluetooth not currently supported.
Guess i have to research more for alternatives.
Fellow TP2 owner here, I just pushed the modded file over to the TF (need root of course) and WIFI tethering works like a champ for me. Need to keep the phone screen active from what I can tell but I'm just using the built in HTC WIFI Router, 3rd party apps might have other options.
So while Bluetooth might be nice it seems like a no go for us old school TP2 owners...
http://forum.xda-developers.com/showthread.php?t=1093778&highlight=ad-hoc
I guess it all depends on what rom you use.
I'm using the 1st generation touch pro with NFSFAN's rom. Bluetooth is right there under the internet sharing application and works flawlessly with my TF.
maoren99 said:
I guess it all depends on what rom you use.
I'm using the 1st generation touch pro with NFSFAN's rom. Bluetooth is right there under the internet sharing application and works flawlessly with my TF.
Click to expand...
Click to collapse
I don't think it's so much ROM specific as it is PHONE specific. Haven't heard of any TP2's that work with bluetooth tethering looking across multiple forums on the subject.
Related
I used to be able to tether using my old ROM as well as the "un-official" new ROM versions prior to the recently released ROM update dated 4/09/07.
I use Missing Sync (ver 3.0.2) on OS X, and it would allow me to tether the 8525 using internet sharing set to USB. Now the only way I am able to tether is via the Bluetooth PAN, and even then the connection is spotty at best.
Did the official ROM change the way Internet Sharing works? This is very annoying and any assistance or ideas would be welcome.
I downgraded from the CUSTEL 2.5 WM6 ROM due to Missing sync's inability to sync with it as well as an inability to tether my Mac. Vista using Bootcamp works but Vista isn't my cup of tea...
Soon...
In a couple of weeks time you will have a solution to your problems with Apple OS X and Microsoft Windows Mobile. (Hint: it's not free.)
I am assuming that this would the much anticipated Missing sync update. If only I could shorten the wait... oh well.
Thanks.
Not really. Trade your 8525 for the iPhone!
bluetooth pan
something must be wrong with your phone because I use Bluetooth pan with internet sharing at work, in my car, at home and it works just fine. I even thought about ditching the Internet at home
neomuzic said:
something must be wrong with your phone because I use Bluetooth pan with internet sharing at work, in my car, at home and it works just fine. I even thought about ditching the Internet at home
Click to expand...
Click to collapse
I do it too. All the time. Is AWESOME from the car, especially in a a 3G area. (Parked, not driving.)
i can't even connect my 8525 to my mac via bluetooth. it worked once and now the phone won't open up the passcode screen to connect.
edit: my rom is version 1.34.502.3. should i update to a newer one?
I think its the location that I am at that may be to blame. I have a really slow connection via Bluetooth PAN. The same isn't true when using Vista and Internet sharing via USB - that connection is much faster (though it too blanks out at times).
As for connecting to OS X: simply start the Bluetooth setup assistant on the mac and search for "any device". Then select the phone and pair the two. At the very end of the process the Mac will list the services that are available via the phone. One of them will be the shared network.
ranjeetsodhi said:
I think its the location that I am at that may be to blame. I have a really slow connection via Bluetooth PAN. The same isn't true when using Vista and Internet sharing via USB - that connection is much faster (though it too blanks out at times).
As for connecting to OS X: simply start the Bluetooth setup assistant on the mac and search for "any device". Then select the phone and pair the two. At the very end of the process the Mac will list the services that are available via the phone. One of them will be the shared network.
Click to expand...
Click to collapse
yeah, it stalls after i select it from the device list. the screen where it gives me the passcode to connect it, it seems like my phone doesn't receive it. not sure. but you think i should upgrade the rom? looks like mine is kinda old.
I'm posting with OSX using my phone right now
delete the bluetooth pairing on the osx machine and on the phone
from osx bluetooth assistant and select any device
if it asks about using the phone as a headset disselect that
if the phone once pairs asks about a serial device do not select that
verify if bluetooth still is on on the phone
goto internet sharing
bluetooth pan
connect
make sure its actually connected to the internet
on the osx machine click the bluetooth icon again and select "join network on ___your phones name____ "
thats it!
sometimes give it a second
if it still doesn't work make sure you don't have some kind of crazy firewall setup
using Custel's 2.5 rom (windows mobile6)
juicychus said:
i can't even connect my 8525 to my mac via bluetooth. it worked once and now the phone won't open up the passcode screen to connect.
edit: my rom is version 1.34.502.3. should i update to a newer one?
Click to expand...
Click to collapse
Hi,
Some weeks ago I tryed to use MissingSync for internet sharing with different WM6 versions without success. With official AKU3.3.1 version it works with the USB cable. But battery life is very short with this version.
Regards.
Yes, missing sync does not yet support WM6. Try the "normal" bluetooth pan method described above.
Anyone tried doing OS X tethering with newer versions of the WM6 roms?
I'm currently running vp3G 2.0 (WM6), rom date 5/15/07, radio 1.40.30.00, protocol ver. 32.73.7020.16H
Because I'm working offsite tomorrow, I was hoping to use my phone to tether my laptop to work with VPN on the laptop... and then I can login and out of the timeclock, etc. But trying it from work tonight before I leave, I can't get the bluetooth on my 8525 to connect to the PC.
Followed Neomuzic's instructions to the letter, but Safari isn't getting things working. Any assistance would be appreciated!!!
Nevermind... I'm a dork! Figured out where Internet Sharing was on the phone, and all is well. Having a little trouble connecting to my work proxy server... but messing with that now.
todd_jg said:
Yes, missing sync does not yet support WM6. Try the "normal" bluetooth pan method described above.
Click to expand...
Click to collapse
As of August2007, Missing Sync 4 supports WM6.
I'm also using bluetooth pan right now to post
Hello all,
I usually dont post much since i rarely have anything to contribute, but this time I do. I am running a macbook connected to my cingular 8525 thru the bluetooth pan and have zero problems. I upgraded my rom to the new vp one with all the latest settings and love it. No more looking for a hotspot for me. I dont use safari broswer on my mac, i use firefox. Thanks to everyone on this forum with the knowledge and time for helping the rest of us.
What i do is connect my JasJam to xp running through parallels, start internet sharing and it installs the drivers(first time of connecting it) and then it works perfectly everytime. Only in xp though.
I have installed the latest missing sync but havent tried internet sharing on mac osx but now that u guys say it works thats awesome! Will mess with it later (knowing me i won't attempt to get it to work until i'm off in some foriegn area with no internet connection and will need to download drivers that i'll struggle to get through pie/opera on my jasjam...) i fail to plan ahead with things like this! lol
Delete post
Delete post?
Tethering 8525 to MACBOOK. HELP.
I tried several different approaches to tether my 8525 to my MACBOOK, with no success.
I have specific scripts from the web installed into the modem scripts folder. No luck with any of them. I believe the scripts aren't the problem but the COM ports are the culprit.
I recieve an error message that says," Failed to open RFCOMM serial channel. Check if authentication needs to be enabled in your device"
This is after pairing the 8525 to the MACBOOK and completing the blue tooth setting in the Network folder in the System Preference folder.
The pairing is successful because I can "send files" to the 8525 via blue tooth icon.
I read somewhere that the MACBOOK should allow me to set and choose COM ports but I haven't found the option.
My question is where do I find the COM port option in the MACBOOK because I believe that is where my problem is.
MACBOOK C2D, OS 10.4.10.
8525 ROM: 2.15.502.3
abubasim said:
Not really. Trade your 8525 for the iPhone!
Click to expand...
Click to collapse
had iphone not nearly as good as my tytn until its fully hacked but think bout what your saying befor you speak lol
kidding
Why is it impossible to use the tethering by BT between the Archos Gen 8 and more android phone ?
fortunately on the nexus one i wil be create a hotspot
but for another phones have you a solution ?
Hy with Samsung Galaxy 9000 it works very easy. Build up a Mobile Hotspot on the SGS and Connect with to the Archos, works perfectly.
Sent from my GT-I9000 using Tapatalk
why it don't work for anothers phones
n1 by eg ?
You can get it to work on N1 too ... but I don't think it is built into the phone though.
I use CyanogenMod 6 on my N1, and there are only options to do Wifi Hotspot (which burns battery power like there is no tomorrow) or USB tehtering.
But if you use the app called Wireless Tether, you can use BT tethering between your Gen8 and your phone.
Rockstar from ArchosFans' forums made a vid on how to do that: http://www.youtube.com/watch?v=CN4hBqIyI-U
i use the same
but for many android phones it is not possible
Yeah, I've been posting this same question all over the place begging for someone to help me tether to my Moto Cliq (rooted with tethering enabled). I even asked Archos and they sent me some generic response that didn't help at all.
I know my Cliq can tether, cause my PC can connect to it. But with my Archos, all I get is the "paired, but not connected" nonsense. No matter what I do. It's the same with my N900 as well. I am starting to think that the Bluetooth module on the Archos is defective. But I don't have any other Bluetooth devices to test it out with.
This thing is almost useless to me without tethering as a possibility.
most phones (including android ones) provides ad-hoc wifi tethering only (via 3rd party software), and archos cannot detect ad hoc wifi network.
henrylim said:
most phones (including android ones) provides ad-hoc wifi tethering only (via 3rd party software), and archos cannot detect ad hoc wifi network.
Click to expand...
Click to collapse
Android does not officially support AdHoc Networks. Once we have root we can make this work easily.
I did a walk through for bluetooth pan with a Droid X: http://forum.archosfans.com/viewtopic.php?f=74&t=43001
I tried the same with my wifes inc and it didn't work.
iPhone 4 and BT Tethering
1. Remove all previous BT pairing between iPhone and Archos 70.
2. Se both BT to active and discoverable.
3. Once you see iPhone under "bluetooth devices" in Archos, get it paired.
4. At this point, you will see that status on Archos is "paired but not connected"
5. In Archos, goto "Cell phone tethering", you should be asked to set up a tethering profile for Bluetooth or USB. Select Bluetooth and a new iPhone PAN profile will be setup.
6. Select checkbox for "Tether"
7. At this point, you will see Archos device in iPhone changed to "Connected", and a blue bar at the top says "Internet Tethering".
Bear in mind if iPhone or Archos goes to sleep, my experience is that the Internet connection is gone, no matter if the connection status remains. Therefore, please do not allow iPhone or Archos to go to sleep while you are using the Internet tethering connection.
Hope this works for you.
cajl said:
i use the same
but for many android phones it is not possible
Click to expand...
Click to collapse
WiFi Tethering has been introduced with Froyo for most phones. Before that you needed root and some app doing it.
WiFi Tethering with my Desire works great, but I wasn't able to setup Bluetooth Tethering between them. Like there are profiles missing to establish a network connection.
Try the Toshiba Bluetooth Stack, there is a 30 day free trial and it give you PAN. I have a HTC Eris and bluetooth tethering is not possible, it crashes the phone.
I have an Espresso running CM 6.1 and WiFi Hotspot works... Will I be able to use it with the Archos 70?
HTC Magic with Cyanogenmod 6.1 and the app 'Wifi Tethering' in bluetooth mode works perfectly.
I thought wifi tethering was going to eat the battery too.
Was able to tether from ~90% to ~10% for over 6 hours continuously on an Evo running cm6.1.1 with the built-in mobile hotspot.
I posted a .apk in post #3 that has worked for all the rooded android phones i have tried.
http://forum.xda-developers.com/showthread.php?t=887018
use mifi or similar product, i use a product from ZTE and work well. better don't use your android phone for wifi thetering, it will drain your phone battery much faster
use you phone to search for "google wireless tether" and download the apk this is free and works great for BT tethering between my 101 and moto droid 1.
henrylim said:
1. Remove all previous BT pairing between iPhone and Archos 70.
2. Se both BT to active and discoverable.
3. Once you see iPhone under "bluetooth devices" in Archos, get it paired.
4. At this point, you will see that status on Archos is "paired but not connected"
5. In Archos, goto "Cell phone tethering", you should be asked to set up a tethering profile for Bluetooth or USB. Select Bluetooth and a new iPhone PAN profile will be setup.
6. Select checkbox for "Tether"
7. At this point, you will see Archos device in iPhone changed to "Connected", and a blue bar at the top says "Internet Tethering".
Bear in mind if iPhone or Archos goes to sleep, my experience is that the Internet connection is gone, no matter if the connection status remains. Therefore, please do not allow iPhone or Archos to go to sleep while you are using the Internet tethering connection.
Hope this works for you.
Click to expand...
Click to collapse
This does not work for us with Sprint. Sprint uses CDMA not GSM. No APN on my Sprint HTC Hero. Tethering works perfectly with my Laptop and my HTC Hero using Bluetooth. NOT with Archos 70 IT.
crc111 said:
This does not work for us with Sprint. Sprint uses CDMA not GSM. No APN on my Sprint HTC Hero. Tethering works perfectly with my Laptop and my HTC Hero using Bluetooth. NOT with Archos 70 IT.
Click to expand...
Click to collapse
Uhh... I'm not having problems tethering with BT, Archos 101 and Sprint (HTC) Hero. Not at all sure what makes you think CDMA vs GSM has to do with this.
2.0.5pre7 wireless tether.
I seem to be having problems tethering my A101 to my HTC Touch HD.
Bluetooth seems hit and miss. Any suggestions on correct procedure.
I also have a little app on my phone for establishing it as a wifi router. The app is wmwifirouter. While my lap top see's it fine the A101 just doesnt see it. Anyone managed to ge their A101 to tether to a wifi type connection their WM phone?
i'm having problem with it as well ... the A101 to my SE x10i ... the bluetooth can "see" the mobile but when it cannot pair ... this is plain stupid!!
i've tried to contact the Archos Support but no solutions as yet.
I tether my HTC Evo to my Archos 70 IT with zero issues. My Evo is rooted and I run the "Wireless Tether" app in the market (their website). It starts an ad-hoc WiFi access point that the tablet can connect to. I've never had any issues. The app supposedly works over bluetooth as well but I've never tried it.
I'm in the exact same boat as you airnike, except the issue is tether to my BlackBerry Bold 9780. I found a thread (listed below) that seems to offer me the possibility of getting my connection up and running - since it seems that it was a problem in the Archos firmware in the first place, maybe you can solve it by following the thread.
Because I am so new I cannot just post the URL, so here it is in a conveluted fashion.
h t t p ://forum.archosfans.com/viewtopic.php?f=63&t=46116
Stock Archos devices don't support ad-hoc networking, only infrastructure. Wireless Tether from the market supports ad-hoc and infrastructure mode. Some phones support infrastructure mode and some do not. If your phone does, you are lucky and it may work. There is a list of supported devices on the Wireless Tether website. There are also several threads on here about tethering and ad-hoc networking.
Tethering Blackberry is another problem, I think I read somewhere it was resolved now, but you need to type in a script in terminal.
Tethering Windows Mobile should be very easy. I always tether bluetooth from my Samsung i8000 to my 101. I never used wifi though as I reckon bluetooth is more battery friendly and speed is acceptable. What exactly is your tethering problem? what do you mean hit or miss? I've been consistently able to tether via bluetooth on my WM phone.
I have had some trouble tethering my Touch HD to my "101" as well - but finally this seems solved.
After pairing both devices, I found that I need to activate Bluetooth on both, then establish internet connection on the "HD" - and after that my "101" will tether fine.
The only strange thing I am a little unhappy with, is the fact that the tethering seems to break down when I turn off the screen of the mobile. When it switches off by itself, the connection appears to be stable.
i have a htc ozone wm phone how did u connect to your a101
What are the pro and cons of tethering via Bluetooth? I have Wi-Fi hotspot on my phone, and it worked perfectly right away. Could the Bluetooth use less battery?
Sent from my SilverBullet "HTCDesireZ running CM7"
This thread went a bit off topic eh?
Pete, did you ever get this working? I have a A101 16GB and a Touch HD. They tethered via bluetooth off the bat for me.
Running:
A101 16GB - UrukDrod 0.7
Touch HD - EnergyRom
If you want me to post steps, let me know.
Hello.
I'm having trouble tethering an Asus Transformer (stock) to my Touch HD (also stock).
I can pair them but they don't connect.
Tried the establish data connection/turn BT on/tether suggestion but no luck.
Any suggestions?
Cheers,
E
eborremans said:
Hello.
I'm having trouble tethering an Asus Transformer (stock) to my Touch HD (also stock).
I can pair them but they don't connect.
Tried the establish data connection/turn BT on/tether suggestion but no luck.
Any suggestions?
Cheers,
E
Click to expand...
Click to collapse
No clue. Wouldn't they know more in the Asus Transformer forums?
http://forum.xda-developers.com/forumdisplay.php?f=1104
I've found several threads on the subject of Tethering a Xoom via BT and Wifi but I'm not having much luck and there's a lot of confusion about providers/Xoom versions/phones, etc. so rather than tag on to a thread I hope it's ok to start a new one.
I have the following:
Wifi Xoom (NOT the Verizon version, the one that just came out on March 27th here in the US)
HTC Hero GSM - completely unlocked (purchased in Europe). Running Android 2.1 standard update from HTC. I'm using the AT&T data plan but device is not an AT&T device at all.
I would like to see if I can Tether the Xoom to the phone and use the data connection I have on it. I understand that the Xoom's chipset doesn't allow for Ad-hoc networks. I've tried to do a Wifi Tether and although that works from my Laptop to my Phone the Xoom doesn't see the ad-hoc network. I don't believe there is any way for me to make the Wifi Tether work in Infrastructure mode so I don't think there is an option there (unless the Xoom can be modified somehow to see Ad-hoc).
So now I'm trying to use Bluetooth Tethering. I've tried both PdaNet and Wifi Tether (v2.0.7 and phone rooted via SuperOneClick). Both seem to start up fine and are running. I then pair the two devices but as many others have reported, I don't see any Tethering options on the Xoom so I'm stuck.
I've tried different orders of things... run Wifi Tether, pair, vs. pair then Wifi Tether, work with Airplane mode on vs. off, Wifi on vs. off, etc. but I never see that Tether option show up.
Anyone have this working with an HTC Hero GSM by any chance? Note that this is the Wifi-Only Xoom which seems to have different features than the Verizon 3G Xoom. Could it be that the Hero itself doesn't support this profile? Or can the Xoom be modified to force it to think the device is tetherable.
I'm not sure if rooting the Xoom would help any or maybe flashing a custom ROM like CM7 on the Hero would help any. I'd prefer not to have to do this but if someone has this working with my exact configuration I'd give it a try.
Any help would be appreciated.
From what i know, most tethering tech /apps are establishing a ad-hoc network' which the xoom isnt capable of...
I too have the Xoom wifi only version with a HTC rooted CDMA Hero.
As everyone knows now the Ad hoc will not tether with the Xoom infrastructure as of the latest.
I too get full bluetooth tethering signal from Wireless Tether, but like you the Xoom will "pair but not connect". As you, I am confused as to whether it is the Hero or the Xoom Wifi which will not connect to the bluetooth tether.
I suspect it is the Xoom Wifi, but would also like a definitive answer and better yet a viable solution.
I have no issue tethering my Xoom (Wifi model) with my Verizon Motorola Droid (1 Gen) over Bluetooth.
My Droid is full rooted with custom Gingerbread ROM (2.3.3) and Overclocked Kernel from ChevyNo1. His kernels are everything enable such as tethering and VPN. This might be the difference for some.
The one annoying thing is that everytime I enable the hotspot on my Droid, I have to go into the Xoom settings and enable tethering on the connection to my Droid. This also has to be done if either device goes not a range and brought back. I am trying to find a widget or a Tasker script to auto enable this.
Be sure to already start the wifi tether program on your phone (selecting the blutooth option on it) then bring up the blutooth settings menu on your xoom, just press and hold the little wrench you see to the right of your phone icon. it should bring up the tether option...just press that and you should see it conect via blutooth.
Just be sure to have the wifi tether app on your phone already on and set for blutooth. This works for me everytime (running the atrix) and shoujkd also work for your phone too.
Still no luck on my side with the Tethering on while I do the pairing and/or when I touch the wrench icon.
I'd like to understand more about how the Bluetooth profile is detected. Does my phone have to publish out a certain profile? Or does the Xoom have a list of device types that it knows are tetherable? I've read on another forum that it seemed like Motorola devices like the Droid worked whereas HTCs didn't seem to. I'm wondering if the Xoom detects the type of phone it's connecting to and decides whether it's tetherable or not... Anyone know? If this is the case maybe there's some file that can be tweaked on the Xoom to include additional devices or change the phone to broadcast out a different device name, etc. Maybe I should try changing my device name to 'Droid' or something.
Just guessing at this point....
I had the same issue with my droid, bluetooth tether is a pretty good alternative. I made a video of it, works with most phones with that create the Ad-Hoc. Check out video below to see the easy steps involved. Root on phone required.
Thanks for posting the video. This is exactly what I tried but does not work with my HTC Hero and my Wifi Xoom. I'm going to see if I rename my Bluetooth device name to 'Droid' to see if that makes any difference. I doubt it....
rosso said:
Thanks for posting the video. This is exactly what I tried but does not work with my HTC Hero and my Wifi Xoom. I'm going to see if I rename my Bluetooth device name to 'Droid' to see if that makes any difference. I doubt it....
Click to expand...
Click to collapse
I ran into a little bug, and it wouldn't recognize my droid. I had to unpair and turn on the bluetooth tether app. Then pair. The xoom then recognized the bluetooth tether. Hopefully this works, I apologize if it doesn't.
My wifi Xoom works perfectly paired with a CM7 Nexus One.
App: wireless tether
pd: key is the wrench
I tried renaming the bluetooth device name to 'Droid' but that didn't make a difference. I'm sure I'm following the same steps as in the video. Somehow the Xoom doesn't see the Hero as a Tetherable device...
Maybe there are some differences in Bluetooth chipsets?
Wifi tethering works with the Desire Z or the G2
I assume the network it creates is not an ad-hoc otherwise the xoom wouldn't have recognized it?
It's either not ad-hoc or you're using Bluetooth. You'd have to explicitly choose Bluetooth tethering in the Wireless Tether app so I assume you're using Wifi.
From what I understand some phones (the ones that are meant to be used as wifi hotspots) do broadcast in infrastructure mode rather than ad-hoc so I assume that's why it works for you.
Also of note is that Honeycomb only supports PAN tethering, and not DUN tethering.
Your phone also has to have "bluetooth tethering" turned on (however you do it, I don't have an android phone) so that the Xoom can discover the PAN bluetooth service.
Interesting. Something to read up more on. I'm using Wireless Tether to do the Bluetooth tethering but maybe I need something additional switched on. At least it's another direction to look at....
Seems like someone figured out how to get the Xoom to listen to Ad-hoc networks but that needs the Xoom rooted so I'll also research that. I prefer Bluetooth tethering since it uses less juice on the phone....
It does seem that "Wireless Tether" which is what I'm using on my HTC Hero, is running in PAN mode. If I look at the app's directory it has a pand executable, etc. and when I'm running the tether it is running pand in the process list.
Still, if I pair, even while it's running pand the Xoom still doesn't recognize it as tetherable. Grrr.... Wish I had another bluetooth client I could try to connect to see if it's the phone or the Xoom but I don't have anything else.
I'm wondering if it's because I have the Android 2.1 update for my Hero. Wireless Tether seems to support the 1.5 version of the Hero but doesn't mention 2.1. Maybe there is an incompatibility there...
Anyway, will continue to try to figure it out.
Rosso, your not on your own, I am still trying to figure this out on my hero running froydvillian. I have done the wifi ad hoc mod and thats working for me but BT tethering woudl be better, I will let you know If i ever find a solution.
I did see someone else loaded CM7 for the hero and then BT tether worked, but CM7 seems to have been pulled for the hero at the moment due to stability issues.
I have a droid eris (verizon's cdma hero) and I have the same exact problems but I'm on cm7and using wireless tether. I can get the to devices and connect via tethering but 5 seconds after that my phone reboots.
Just picked up a wifi-Xoom for my wife over the weekend. Tried to get it connected to my phone (HD2) as a wifi hotspot and was having problems (the ad-hoc problem). The xoom wouldn't even see the hotspot. I am running AmeriCanDroid 0413 build and it has wifi tether v. 3.0-pre11. So I switched back to winmo and still nothing, then I tried going to Darkstone SuperRam 1.5 (my fallback build). It has an older version of wifi tether, I think 2.06 or something like that and got the xoom to connect. I haven't had a lot of time to fool around with it, but it was able to get a network connection. Maybe you could try an older version of the wifi tether? I haven't experimented with the BT tethering yet. I don't want to root the xoom yet, maybe when my wife is tired of it.
/edit
Just checked the wifi-tether website and there is a new version of wifi tether and it supports softap which may help the xoom recognize the wifi hotspot.
Hi, I have just managed to get my hero bluetooth tethered to my htc hero.
The process I followed was basically what everyone has said:-
download wireless tether i am using 2.0.7
1. start bluetooth on phone and xoom (make discoverable)
2. Do not pair the devices yet
3. start up wireless tether, select bluetooth and tap to start the actual service
4. go back to bluetooth on your xoom and pair the devices
I then got an icon I had not had before and when I tapped the wrench I got the option to tether.
As for wifi tether your phone needs to put out infrastructure wifi for the xoom to see it, if its ad-hoc, you'll need to do the wifi mod so that he xoom sees adhoc
although as stated the new version of 'wifi tether' (which just seems to be the new name for the 'wireless tether' app) may fix that? but doesn't seem to support bluetooth as the 2.07 version does
There multiple threads dealing with how to get Bluetooth tether to work here is how.
First you need a rooted Android phone.
You must have a phone that running a kernel that has "CONFIG_BT_BNEP" compiled into the kernel you are using.
Otherwise it won't work.
1. Download Android Wifi Tether App version 2.0.7 (do not download higher versions because bluetooth option is not there.
2. Go to your phone turn on bluetooth.
3. Go to your TF -> Settings -> Wireless & Network -> Enable Bluetooth.
Then in TF make Discoverable under Bluetooth Settings.
4. Now you can pair the phone with the TF by scanning for device under your phone.
Hit confirm to pair on both devices. You will notice that both devices will show the other device as "paired but not connected."
5. You need to now go to Wireless & networks settings under the TF -> Tethering & portable hotspot -> enable Bluetooth tethering.
6. Now go to the Wireless Tethering app on your phone. Menu -> Settings -> Enable Use Bluetooth, Enable Discoverable, Enable Access-Control
7. Exit out of the Settings in the Wireless Tethering app. Enable Bluetooth Tether.
8. Go back to the TF under Bluetooth Settings you should be able to tap the your phone device and get the tethering option.
9. You may need to allow the TF on your phone's Wireless Tethering app.
To get Bluetooth File Transfer to work download the Bluetooth File Transfer app from Market to both devices then you are done. No rooted device needed.
Bumping this so people who need to see it, see it. Also added to ultimate thread. Good job.
Bluetooth tether unsuccessful
Wifi Tethering works but need bluetooth tether at work since I can't use wifi due to wifi policy. Followed the steps above and still no go for me. I have htc evo Myns 2.2. Any other suggestions?
kauaiboymo said:
Wifi Tethering works but need bluetooth tether at work since I can't use wifi due to wifi policy. Followed the steps above and still no go for me. I have htc evo Myns 2.2. Any other suggestions?
Click to expand...
Click to collapse
Try get Bluetooth File Transfer to work on your phone and the TF. Were you at least able to achieve that?
First of all thank you for the guide, it worked flawlessly with my TF and Droid X its just the wording causes a bit of confusion for me. Not sure if you meant disable or enable and the option was already unchecked for me.
unable Bluetooth tethering.
Click to expand...
Click to collapse
I did this just last night and tethered to my DX. I didn't have the Wireless Tether app, so I had to go find it - not on the market since the carriers are *****ing about tethering, but I was able to find it from the developer.
Set it to BT tethering, paired the devices and hit the wrench icon on the TF, and BAM! Tethered!
I won't use it very much at all, but I'm taking a couple weeks off and will likely do a 4 day road trip with a friend, so having a connection out on the road will be nice.
Just a heads up.. running a rooted D1 I was able to get my TF to bluetooth tether but not to share the 3G. Installed a ROM (CM7) and was good to go with 3G bluetooth tether working like a charm.
Is this more efficient than wifi tethering?
Antiskunk said:
Is this more efficient than wifi tethering?
Click to expand...
Click to collapse
Saves way more battery than wifi tether and also better speed.
Bluetooth options are disabled under wifi tether. I have enabled bluetooth on my rooted thunderbolt and the TF and both see each other. But I cant proceed further.
I tried this and the wifi apk said I didn't have the correct kernel and so this didn't work...and some of the options were greyed out.
I have an X10 with cobrato's MIUI installed and the stock kernel.
Mine worked great the last time I used it (a couple of weeks ago) but now it won't connect to my phone.. No idea why
tornadog said:
Bluetooth options are disabled under wifi tether. I have enabled bluetooth on my rooted thunderbolt and the TF and both see each other. But I cant proceed further.
Click to expand...
Click to collapse
Same issue here using a HTC Inspire 4G. Gets through Paried but not Connected step but on the phone the bluetooth options under Wireless Tether settings are grayed out.
habanosrus said:
Same issue here using a HTC Inspire 4G. Gets through Paried but not Connected step but on the phone the bluetooth options under Wireless Tether settings are grayed out.
Click to expand...
Click to collapse
try wifi tether 3.0 experimental pre 14 (google it) works on my epic 4g
habanosrus said:
Same issue here using a HTC Inspire 4G. Gets through Paried but not Connected step but on the phone the bluetooth options under Wireless Tether settings are grayed out.
Click to expand...
Click to collapse
Are you using version 2.0.7 I linked in the OP? I am also on Inspire 4G. Of course I assume your phone is rooted.
gordec said:
Are you using version 2.0.7 I linked in the OP? I am also on Inspire 4G. Of course I assume your phone is rooted.
Click to expand...
Click to collapse
Nope....no dice...same thing with 3.0....
FrayAdjacent said:
I did this just last night and tethered to my DX. I didn't have the Wireless Tether app, so I had to go find it - not on the market since the carriers are *****ing about tethering, but I was able to find it from the developer.
Set it to BT tethering, paired the devices and hit the wrench icon on the TF, and BAM! Tethered!
I won't use it very much at all, but I'm taking a couple weeks off and will likely do a 4 day road trip with a friend, so having a connection out on the road will be nice.
Click to expand...
Click to collapse
You shouldn't have to use a tethering app to use the bluetooth tethering on the droid x. You can set up the tethering through the stock wieless and network menus on the DX and transformer.
gordec said:
Try get Bluetooth File Transfer to work on your phone and the TF. Were you at least able to achieve that?
Click to expand...
Click to collapse
Tried bluetooth file transfer but keep getting errors when sending a picture to my Transformer. Any other suggestions?
mike3_17 said:
Just a heads up.. running a rooted D1 I was able to get my TF to bluetooth tether but not to share the 3G. Installed a ROM (CM7) and was good to go with 3G bluetooth tether working like a charm.
Click to expand...
Click to collapse
more details please. running what version cm7?
gordec said:
Are you using version 2.0.7 I linked in the OP? I am also on Inspire 4G. Of course I assume your phone is rooted.
Click to expand...
Click to collapse
Yes, phone is rooted running Cognition HD 1.01 and confirmed version 2.0.7 Wireless Tether.
Sent from my Desire HD using XDA Premium App