Database Users

Use in Car through Aux in

hi,
I have been using a Nokia phone with a 3.5 mm audio jack to connect it to my aux-in of the car and listen to music as well as make or take calls. The phone mic picks my voice quite well and I hear back the calling party through the car speakers.
Does the same work with HTC Touch HD too?
Update: I have connected the HTC Touch HD to my car's Aux in and it works well with the THD's mic picking up my voice easily. I had echo on a couple of calls but would like to check for its recurrence to believe that's some problem with unit or with the connectivity.

Afraid not mate.
When you plug something in the earphone socket, it assumes there's a mic plugged in too, like when you plug in a hands-free kit.
I've got exactly the same setup and didn't click what the problem was the first time I took a call. I just sat there like a pratt, shouting "HELLO" at my phone! lol
There may be a software workround for this, but not that I'm aware of.

I use the same approach.. but currently even though I am using a Belkin cable to a pretty neat deck.. the sound is completely off.. Treble is too high.. and My faithful kenwoods which would handle the full Volume of my N95-2 with ease are now cracking up.
Any ideas??

I use the same approach.. but currently even though I am using a Belkin cable to a pretty neat deck.. the sound is completely off.. Treble is too high.. and My faithful kenwoods which would handle the full Volume of my N95-2 with ease are now cracking up.
Any ideas??

Ideally, you should have the phone volume at about 75% of its max (between the phone volume itself, and the volume on the music player application), and control overall volume from the deck. If it still sounds dodgy after that, mess about with the equalizer on whatever player you're using, or the htc audio booster.
If anything, mine's a little quiet, but I've not tried messing with output volume settings in Tweak HD. I tend to have to have my deck turned up about 70-80%, whereas I normally have the radio at about 20-30%.

johncmolyneux said:
Afraid not mate.
There may be a software workround for this, but not that I'm aware of.
Click to expand...
Click to collapse
Asking this question to all. Is anyone aware of any software to use HTC Touch HD mic while using a 3.5 mm headphones through its audio jack.

not both speakers and mic are off when in headset mode
it's a hardware thing
but like with htc headsets you can connect external speakers and mic to the conntors and it works
easy way is to tear the headset apart and solver in the stuff you want to the connector which came with the headset

johncmolyneux said:
Afraid not mate.
When you plug something in the earphone socket, it assumes there's a mic plugged in too, like when you plug in a hands-free kit.
I've got exactly the same setup and didn't click what the problem was the first time I took a call. I just sat there like a pratt, shouting "HELLO" at my phone! lol
There may be a software workround for this, but not that I'm aware of.
Click to expand...
Click to collapse
Mine works fine setup like this. I've got a 3.5m jack coming out and going into the back of my headunit. I can make calls without a problem. The phone seems to realise the connected jack doesn't have a mic so uses the internal one.
The first time I tried it though the person at the other end couldn't hear me but finally worked out this was because the cradle I was using was blocking the mic on the bottom of the phone! I quick readjustment of the cradle and everything was fine.
Sound quality when playing tunes has always been fine but the voice quality aint that great, the person at the other end sometime complains about echo.

crankshaft said:
The phone seems to realise the connected jack doesn't have a mic so uses the internal one.
Click to expand...
Click to collapse
Hmm.... I'll have to have a play with that then, as it was a total failure for me previously. I definitely didn't have the mic blocked, as my cradle holds the phone by the sides.
Cheers for that - I'll have a play about.

How about something like this?
http://www.overstock.com/Electronics/Audio-3.5-mm-Adapter-with-Microphone-for-iPhone/3440143/product.html?cid=133635
(iPhone example but googling "3.5mm microphone output" finds you more, all about £3)

"How about something like this?"
there is not standart for how 3.5mm jacks with mics work as in the width of the ring and such
doubt very very very much that iphone converter would work with anything but an iphone

Thats a good idea. I havent tried this myself but its not experience that the hadware needs an attached mic when plugging the 3.5mm into speakers. I use high quality headphones with no attatched mic to listen to music on the HD and can take calls via the phone or skype by using the headphones and the phone mic.

crankshaft said:
Mine works fine setup like this.
Sound quality when playing tunes has always been fine but the voice quality aint that great, the person at the other end sometime complains about echo.
Click to expand...
Click to collapse
Same setup as me for the last 12 months. I have to play around with the volume setting on the HU / HD all the time - its not ideal but the internal mic seems to pick up voice fine (and echo!).

[help]Phone outputs sound only in right ear phone

As title says, it used to work properly with both left and right headphones working properly, however now only the right earpiece outputs sound no matter what I try, played music, games, video and all have the same problems.
Could have been something I did with the phone, could have accidentally made it output in the right earphone only. if so, how do I fix it...
Tried other pairs of earphones and all experience the same problems too, the contact should be working as when i insert a earphone, i can hear the electrical contacts being made on the earphone

You can isolate instantly whether it's software or hardware by just reinstalling the firmware.. Then you'll know for sure (when I worked at a Apple reseller, restoring iPod's was the first action I told everyone to take if they didn't know what was wrong)
But I have yet to have seen any balance controls.

Are you using the Samsung earphones that were supplied with the phone? Samsung, and Nokia, use a different configuration to most phones as far as the four-pin socket is concerned, so if you are using any other make, the chances are that only one channel is connected. Also make sure you are using earphones with a FOUR pin plug, not the standard three pin supplied with mp3 players.

Geryatrix said:
Are you using the Samsung earphones that were supplied with the phone? Samsung, and Nokia, use a different configuration to most phones as far as the four-pin socket is concerned, so if you are using any other make, the chances are that only one channel is connected. Also make sure you are using earphones with a FOUR pin plug, not the standard three pin supplied with mp3 players.
Click to expand...
Click to collapse
Standard stereo mini-jack is a universal wiring standard, i.e. tip and two barrel contacts for ground and left/right channels. The fourth barrel contact is usually used for composite video.
If anyone decided to wire their socket differently then you'd never get any earplugs/headphones to work without an adaptor and it would be a totally stupid thing to do.
To the original poster, check whether you've adjusted balance settings to only one side. Not sure how you do that since haven't got mine yet.

Using stock headphones, have not changed any settings to output in right earphones only.will try re flashing when I can

This may sound a bit dumb but you checked you actually properly pressed the jack into the socket? Just asking because the first time I listened to something on my SGS I had the same problem just to notice that the socket was actually tight enough so that the jack wasn't completely in, once I pressed it the missing 1-2mm in the whole thing changed

akselic said:
This may sound a bit dumb but you checked you actually properly pressed the jack into the socket? Just asking because the first time I listened to something on my SGS I had the same problem just to notice that the socket was actually tight enough so that the jack wasn't completely in, once I pressed it the missing 1-2mm in the whole thing changed
Click to expand...
Click to collapse
though that this could have been the problem as well,pushed it all the way in but stop no luck.

Reflashed firmware, still have the problem.... This is already the second problem with my phone, if you have been frequenting this forums you would know that i have also posted a problem with my camera.
So gotta bring down to Samsung svc centre again?
Is there any way i can ask for a 1 to 1 exchange since i have gotten a lemon device...

Qazz~ said:
Is there any way i can ask for a 1 to 1 exchange since i have gotten a lemon device...
Click to expand...
Click to collapse
Yes I'd assume if you describe to them that some key functions don't work properly they should give you a new one, for instance the audio output isn't only for listening to music but also works as the handsfree socket so it is rather vital. You just got a bad copy so go and ask them

akselic said:
Yes I'd assume if you describe to them that some key functions don't work properly they should give you a new one, for instance the audio output isn't only for listening to music but also works as the handsfree socket so it is rather vital. You just got a bad copy so go and ask them
Click to expand...
Click to collapse
Just went down to Samsung svc centre today and described my problems,asked for a replacement and all they replied was "sorry sir, we do not do 1 to 1 exchanges"... Damn was really hoping to get a new phone, anyway now its with them and hope they don't screw anything up with it.

Sound Problem
You solved the problem? I have the same problem sounds to me more slowly in the left side of the headphone. I using Dark Knight 3.

I had such a problem with my old k800i mobile. After buying new earphones, the problem was solved.

Sound Problem
I tried, but no results

the sgs ( GT-I9000 ) uses a different type of wiring for the headphones, is the same nokia uses for the N95, the sgs2 headset wont work! the galaxy tabs headsets wont work, the iphone/ipod headsets wont work!!!!! why??? because the wiring is different!! why?? ask samsung!
ok, are you using the same headset? if yes, try to use them in someone else sgs (gt-i9000) if they work then it's your phone, if they don't ask if you can use his headset in yours, if they work then is your headset, just get a new one keeping in mind what i just told you.
if you narrowed it down to your phone being faulty.. (it happened to me too... ) and I just saw that you are waiting for it to be fixed, just wait until you get it back... ( i hope they will fix it for you too)... in my case they changed the logical board, so it's basically a new phone on the inside.
good luck.

Inline remote and mic headphones don't work

Here's another problem I found, the standard inline earphones with mic and single button doesn't work.. it worked just fine on my Desire HD and nexus S as well as nexus one..
I tried 2 different ones, my guess is that the Atrix headphone jack only has audio out.
if you guys have found otherwise let me know how I can get that to work..
if in fact the Atrix is only audio out on the headphone jack I'll definitely return it tomorrow and get something else..

I just grabbed an iPhone headset (stereo) and made a call and it worked great.

I'm having this same problem. I used a pair of SkullCandy 50/50 and only got audio. The mic was still working on the phone, and the buttons on the headphones didn't do anything.

I have ibeats headset, everything works on DesireHD and my iphone. but for some reason none of it works on the Atrix.. beh..

I dug out an old pair of headphones that came with a Palm Pre, and the mic works on that. The button also brings up a menu to start a voice program. They do not have volume buttons so I cannot test that.
This is really going to annoy me if this phone can only use crappy headsets.
waltah! said:
I just grabbed an iPhone headset (stereo) and made a call and it worked great.
Click to expand...
Click to collapse
Was this a standard one that comes with the iPhone? Do the volume buttons do anything?

Skullcandy FMJ w/mic
I have the skullcandy full metal jacket w/mic and it works fine. Although when I first inserted the jack into the plug (*beavis laugh) the phone still played music out of the speaker(s) on the phone. So I pulled the plug out and reinserted while twisting the plug. Dont push too hard cuz it seems the plug does not go all the way in. The curve on the case near the jack makes it appear that it is not fully inserted. Try cleaning your plug as well.

Both headphones i tried stick out of the phone a little bit, and the same amount. Plus audio works on both, I would think that audio would not work if one was not plugged in correctly

xdraconis said:
I dug out an old pair of headphones that came with a Palm Pre, and the mic works on that. The button also brings up a menu to start a voice program. They do not have volume buttons so I cannot test that.
This is really going to annoy me if this phone can only use crappy headsets.
Was this a standard one that comes with the iPhone? Do the volume buttons do anything?
Click to expand...
Click to collapse
Just tested and the volume buttons don't do a thing.

I tried "removing" vlingo and voice commands/search, but still can't use the remote button on my headphones.

might have bad jack
The jack might be broken or not connected well. It is a modular piece that can be removed without de-soldering if you take the phone apart you can test each ring on the plug/jack for continuity by touching the meter to the springy metal contacts that touch the circuit board. I would just do a return or atleast have att try other headphones. Im not sure about the volume control but the single button on my mic controls everything including media forward reverse and pause. I can even get vlingo and google voice search to come up ( a long press on the other hand opens the media application).

Old thread... but for future reference, Motorola switched the headset pinout on this phone and the Xoom. You'll have to ask the Cliq guys what they use, or you could wire a adapter cable up.
I can't post links, but look up the Motorola OH20 and motorola.com /Support/CA-EN/OMTP-Headset-Support

Wow, that is kinda retarded that moto did that. I'd never even heard of OMTP until just now. Seems MOTO is the only one that does this. Some 'open' standard. Seems the only way around it would be to use a B headset.

Wired Headsets Don't work due to OMTP
Well...
I am a huge fan of Bluetooth technology and have just about every kind of handsfree, however I was really looking forward to the 3.5 mm jack. There are some pretty impressive headsets available.
This is what I found about OMTP:
http://www.motorola.com/Support/CA-EN/OMTP-Headset-Support
Here is an option I am pursuing:
http://www.nox-audio.com/Products/OMTP-Adapter-16
I hope this helps...

secretlevel said:
Old thread... but for future reference, Motorola switched the headset pinout on this phone and the Xoom. You'll have to ask the Cliq guys what they use, or you could wire a adapter cable up.
I can't post links, but look up the Motorola OH20 and motorola.com /Support/CA-EN/OMTP-Headset-Support
Click to expand...
Click to collapse
This isn't the problem. I have a xoom and the same headset can play/pause.

So, no solutions to this except for spending another 50 bucks to buy a new head set that's omtp compatible?

I have a set of ear buds rat came with a blackberry bold from work. It only has a single button but it does do play/pause in winamp and the mix works. There is a post in the accessories section with some options and reports of ways working for everyone.
Sent from my Atrix using XDA Premium.

tried:
a iPhone 3g earphone with only one button works fine for me.
several iPhone 3gs 3-button earphones - don't work at all, even the mic

Headset - Earphone Problem

Hi all...
My daughter has a ZTE Blade that I flashed originally to a custom rom running Froyo... for Xmas she got some new headset in ear headphones (one's with a mic)... The sound through these when plugged into the Blade is similar to listening to music underwater (muffled and echoing).... if you press the mic button the volume increases but is still poor quality. However plug in a normal earphone 3.5 connector (two bands rather than three) and everything sounds fine... I tried the earphones on other phones/computers and there is definitely nothing wrong with them. We also bought a second pair for my other daughter and they were exactly the same, I then tried my supplied Samsung Galaxy SII headset... again same thing... muffled and echoing sound.
So the problem was with the phone.
I decided to re-flash the phone this time with a Gen 2 Cyanogen Gingerbread rom... I tried the audio again after flashing and it seemed to have been fixed (admittedly I only played a track for a few seconds). Over the course of the day my daughter has reinstalled her apps etc... went to listen to some more music and again the same problem... muffled and echoing sound - pop in some normal headphones and everything is fine.
I have searched around and the problem seems to have come up before a few times but no one has really been able to track down what the issue is. I was actuallt thinking it might be app related (Skype or Tango for example) but I have stopped (not uninstalled yet) these apps but it makes no change.
So it seems that the Blade will not work with any wired headset/mic - any idea's please?

I found it wouldn't work with a headset that has a mic on it, but I got it working fine with my £5 jvc gummi headphones although I'm not getting much in the way of sound quality and volume. Still miles better than the stock headphones in the box though
Sent from my ST18i using XDA App

I know this is an old topic but I found the solution and some others may have the same problem:
There are two kinds of connectors, they have ground and mic signal switched.
If you get the wrong one it will work but sound (mostly speech) will be very bad, this results in a very poor audio quality.
So just get the correct ones (Apple-Style) with mic or the ones withour mic will also work fine.
http://en.wikipedia.org/wiki/Phone_connector_(audio)#Mobile_phones

Some headphones not working.

Hi,
I have a pair of xiami piston headphones and they work fine with my older phone (galaxy s3) but with my 6P they are not detected by the phone. I can't use them to listen to music or make calls.
I tried a pair of generic headphones and they do work. Is there some headphones that are simply incompatible with the device?

Yes I had the same experience. My samsung headphones from my galaxy s5 can't be used to make phone calls and if you try to use the volume adjustment buttons it pauses playback. Another pair of off-brand headphones I bought at duane reade work just fine for making calls. It is strange because w/ my galaxy I could use apple headphones or really any brand and they all worked fine. They should all work exactly the same.

I just hope this is a software compatibility issue with the in-line mic/controls and not a hardware issue. I have three pairs of pistons 2's that I used on a regular basis with my oneplus.

chowhoundb said:
I just hope this is a software compatibility issue with the in-line mic/controls and not a hardware issue. I have three pairs of pistons 2's that I used on a regular basis with my oneplus.
Click to expand...
Click to collapse
I have found the same issue...hopefully software.

+1
My V-Moda Crossfade LP2s are unable to control anything on the 6P, where they worked just fine on the LG G4

I was able to get my Piston 2 working by holding the VOLUME DOWN button while pluging them. but the controls on the cable do not work. but I have sound at least.

clongetty said:
I was able to get my Piston 2 working by holding the VOLUME DOWN button while pluging them. but the controls on the cable do not work. but I have sound at least.
Click to expand...
Click to collapse
That's odd that audio would completely fail.
I just tried another headphone pair I have. They are Klipsch Image S4i and the middle button works, even though these are iPhone specific headphones (hence the i in the name). The volume buttons on it don't do anything.

havanahjoe said:
That's odd that audio would completely fail.
I just tried another headphone pair I have. They are Klipsch Image S4i and the middle button works, even though these are iPhone specific headphones (hence the i in the name). The volume buttons on it don't do anything.
Click to expand...
Click to collapse
Isn't there an app that can remap the "input" it sees from the headphones?

I'm encountering issues across ALL headphones with inline buttons, including Sony, Beats, and the Project Fi headphones. I'm on my second device now (RMA'd the first to see if it was device-specific), and all exhibit the same issue: double-click to skip track fails when the device is locked after a certain number of presses, and recogntion of the inline button is generally sporadic when the device is locked.
HOWEVER! Everything is perfect when the device is unlocked! So this has to be a software issue, right?

i'm having issues where the headphones seem to be working, but the mute button is not muting the headphones (but they do mute the call). so i hear EVERYTHING in my ears. its like a weird loopback.

The_Middleman said:
I'm encountering issues across ALL headphones with inline buttons, including Sony, Beats, and the Project Fi headphones. I'm on my second device now (RMA'd the first to see if it was device-specific), and all exhibit the same issue: double-click to skip track fails when the device is locked after a certain number of presses, and recogntion of the inline button is generally sporadic when the device is locked.
HOWEVER! Everything is perfect when the device is unlocked! So this has to be a software issue, right?
Click to expand...
Click to collapse
There was a thread about this, maybe it was you who posted it.
My S4i headphones can control music (pause/unpause) with the screen off. I have Smart Lock enabled with my Moto 360 though, so not sure if that makes a difference. I also finally updated to MDB08L this morning. I was stuck on MDA89D until I manually sideloaded the MDB08K OTA (then the MDB08L OTA was downloaded by the phone).
I just tried my V-Moda Crossfades and those still are not able to control anything with the screen lock or unlocked (last time I had used them was before the software update)
---------- Post added at 11:37 AM ---------- Previous post was at 11:37 AM ----------
640k said:
i'm having issues where the headphones seem to be working, but the mute button is not muting the headphones (but they do mute the call). so i hear EVERYTHING in my ears. its like a weird loopback.
Click to expand...
Click to collapse
That sounds like a feature I might like to enable sometimes at work, but it would be annoying when trying to isolate everything around me!

havanahjoe said:
That sounds like a feature I might like to enable sometimes at work, but it would be annoying when trying to isolate everything around me!
Click to expand...
Click to collapse
it wasn't such a nice feature as i was walking from my car and the mic was rubbing on the zipper of my jacket and i could hear it and the wind in my ears. if i covered the mic with my hand, the sound went away, so it seems like there is definitely a software issue.

640k said:
it wasn't such a nice feature as i was walking from my car and the mic was rubbing on the zipper of my jacket and i could hear it and the wind in my ears. if i covered the mic with my hand, the sound went away, so it seems like there is definitely a software issue.
Click to expand...
Click to collapse
I get that when using the Klipschs, but it's the vibration traveling through the wire and into my ears (since they are in-ear headphones), and it is annoying.

i use Apple EarPods. $29. love them.

My Xiaomi Pistons were the only set of headphones that didn't work at all (music played through front-facing speakers and not the headphones). All other headphones I own seem to have the same compatibility issues as all other Android headsets vs iPhone made headsets in regards to the in-line buttons working or not.
I hate in-ear/noise-cancelling/over-ear options since I use headphones while walking around the city and still prefer to still hear what's going on around me. Apple EarPods work but the in-line volume buttons don't work. Play/Pause/Answer/End button works fine though. My only other option that I've discovered is the Amazon Fire Headset. They are similar pods that don't isolate sound and all buttons on the headset work fine.

RG129 said:
My Xiaomi Pistons were the only set of headphones that didn't work at all (music played through front-facing speakers and not the headphones). All other headphones I own seem to have the same compatibility issues as all other Android headsets vs iPhone made headsets in regards to the in-line buttons working or not.
I hate in-ear/noise-cancelling/over-ear options since I use headphones while walking around the city and still prefer to still hear what's going on around me. Apple EarPods work but the in-line volume buttons don't work. Play/Pause/Answer/End button works fine though. My only other option that I've discovered is the Amazon Fire Headset. They are similar pods that don't isolate sound and all buttons on the headset work fine.
Click to expand...
Click to collapse
mine didn't work as well. however, my amazon ones worked and i could also use vol up and pause, but vol down wasn't working.

So now my headphones are working apparently, the inline mic controls, pause/play volume up and down now work.
Using the Sennheiser Mm30g.

The Bose QC25s work like a charm along with the inline controls.
But...you need to buy the "made for Android" version.

I also have the pistons and they no longer work

My jaybird bluebirds x work perfectly. Need to test in my Lexus, however, pairing went fine so expect it will be ok.
Sent from my Nexus 6P using Tapatalk