Database Users

Transfering ext3 + apps to new SD card

Quick question, I have an 2GB (Non-class 6 SD card) and it was working okay with my G1 phone. I partitioned it with no problem, have apps, themes, roms, basically the whole nine yards on it. I recently just purchased a new 8 gb 6 class SD card and was wondering if Paragon Manager or any other program can transfer the data over flawlessly? I know I have to create a new ext3 part (probably using paragon manager) and then transfer all the data over...but was wondering if anybody else did this before without running into any issues and what was the overall process you took? I appreciate any help. Thank you.

no issues here, done it a couple times. didnt use paragon though. used ext support on my mac to copy all files from both partitions, then format the card using GParted on my Slax USB. then put my files back, inserted into g1 and booted the phone. cyanogens MOD works great with it.

malaeus said:
no issues here, done it a couple times. didnt use paragon though. used ext support on my mac to copy all files from both partitions, then format the card using GParted on my Slax USB. then put my files back, inserted into g1 and booted the phone. cyanogens MOD works great with it.
Click to expand...
Click to collapse
Quick question for you, did your apps still show as installed in the market when you swapped cards? I have been meaning to get my 8GB cards (I have a few with tv episodes on them) set up so I can swap between them and my 16GB at any time, but this question is one that is keeping me from trying yet (that and a lack of time).
Thanks.

insert original card and do not mount it (or unmount it if auto),
dd if=/dev/sdcardfile of=/home/yourusername/tmpsdbackup
swap cards and do not mount it (or unmount it if automatic),
dd if=/home/yourusername/tmpsdbackup of=/dev/sdcardfile
Then run gparted, move your ext partition to the end of the disk and expand your crap32 partition to max.

wait so do i just partion my 8 gig c6 and than copy all files off my other sd card and i should be able to boot up, of course redownload everything or should i not try that
and when i say copy my files ove3r just the ones on my sdcard not all my apps

Goog1e Phone said:
Quick question, I have an 2GB (Non-class 6 SD card) and it was working okay with my G1 phone. I partitioned it with no problem, have apps, themes, roms, basically the whole nine yards on it. I recently just purchased a new 8 gb 6 class SD card and was wondering if Paragon Manager or any other program can transfer the data over flawlessly? I know I have to create a new ext3 part (probably using paragon manager) and then transfer all the data over...but was wondering if anybody else did this before without running into any issues and what was the overall process you took? I appreciate any help. Thank you.
Click to expand...
Click to collapse
I used Partition Manager to partition my 8g Sd card into a Ext3 partition. What I did was just wipe, reflash my ROM (Cyanogen's 3.4) and reinstalled all the apps from the Market. It seems like it would take forever, but it really didn't.
The reason why I reflashed was because when I changed SD cards originally, it stopped reading all the original files from the original SD. All-in-all, it was very easy to just: Wipe, Reflash the ROM, then reinstall apps from Market, which should still be listed under Downloads.

how do you format an ext3 partion

Clockwork not loading up off 16Gb card

For some reason, I've put clockworkmod on my device and always use it to flash.
I have a 16gb Sandisk memory card, which at first worked fine with it.
All of a sudden, a Gingerbread ROM claimed the card to be corrupt?! So, I used Gingerbread to format.
Tried to do an update, and now the card isn't recognised by the A2SD setting of MAGDLR 1.1. I have to use a 4gb to flash now.
I tried formatting the 16gb card in windows (fat 32, 32k sizes), reapply the cwkmd files to the card, but still, MAGDLR won't load it.
Any ideas :-/

jonboyuk said:
For some reason, I've put clockworkmod on my device and always use it to flash.
I have a 16gb Sandisk memory card, which at first worked fine with it.
All of a sudden, a Gingerbread ROM claimed the card to be corrupt?! So, I used Gingerbread to format.
Tried to do an update, and now the card isn't recognised by the A2SD setting of MAGDLR 1.1. I have to use a 4gb to flash now.
I tried formatting the 16gb card in windows (fat 32, 32k sizes), reapply the cwkmd files to the card, but still, MAGDLR won't load it.
Any ideas :-/
Click to expand...
Click to collapse
Did you do a quick format or a full format? If Quick, plz do a full, and try again.

Also, don't use the right-click format method. Go into disk management and do it there. Not promising anything - it's just better.

I found a bug in MAGLDR in my case. It would try and load CWM by K:\Recov\zImage then would write S and boot back to MAGLDR main menu. So here's what I did:
- Boot MAGLDR
- Click Load AD SD (Fails)
- Remove SD card while booted
- Click Load AD SD (fails again obviously)
- Put SD back in
- Click Load AD SD (Works)
Try that. Seems like an MAGLDR bug to be honest, because after setting the SD path, you can't edit it again... Even after flashing MAGLDR back to the phone (I've tried). I guess flashing stock WinMo then flashing back MAGLDR could fix the issue, but I haven't bothered.

I seldom have problems with MicroSD Cards, then again, I usually tend to buy Class 2 MicroSD cards that perform higher than Class 2 in terms of sequential writes. So, my MicroSD card writes at 7.x MB/s although it is a Class 2.
Anyways, try using a WIPE application, something that ZEROES out the whole card. Like the SD Formatter 3.0 (Beta) for SD/SDHC/SDXC. For me, I prefer to use [email protected] Disk.
Once the card is ZEROED out, just use your GParted to Partition it, if you need to. If not, just do a full format in Windows.
Ultimate Boot CD is an ISO which has a USB Script. So you just extract the ISO, then run the CD2USB script to make a bootable USB Flash Drive with a lot of useful tools.

LiFE1688 said:
Anyways, try using a WIPE application, something that ZEROES out the whole card. Like the SD Formatter 3.0 (Beta) for SD/SDHC/SDXC. For me, I prefer to use [email protected] Disk.
Click to expand...
Click to collapse
I had the same issue - 8GB MicroSD. Tried manual formatting, re-setting the card TNA. [email protected] Disk did not work either, but SD Formatter 3.0 worked perfectly!
Thanks a lot for this tip!

There are a few steps you can try to get your card working again.
1 - Full format, I know it has been mentioned but it is surprising how much a full format can help
2 - Try a non Microsoft tool like 'Panasonic SD Formatter', google it. I wipes out any partitions as well.
3 - 'Partition Wizard' for Windows. This is a great alternative to Gparted but for Windows and free.
4 - If all these fail, then it dont hurt to try Gparted, I dont see it will help but you never know.
All of those failing and it is a new card, get a refund.
I recently bought a 16GB from Ebay and they sent refund without even asking for the card back so I know you can get some dodgy Micro SD Cards.
Good luck

Yep - the Panasonic SD formatter fixed it using a Full 0's write! Many thanks to all.

update your magldr to 1.12 and try it it worked for me using 16gb class 2

YOU MIGHT want to RESET your device in NAND
that could also help when troubles arrive

nokn956120 said:
There are a few steps you can try to get your card working again.
1 - Full format, I know it has been mentioned but it is surprising how much a full format can help
2 - Try a non Microsoft tool like 'Panasonic SD Formatter', google it. I wipes out any partitions as well.
3 - 'Partition Wizard' for Windows. This is a great alternative to Gparted but for Windows and free.
4 - If all these fail, then it dont hurt to try Gparted, I dont see it will help but you never know.
All of those failing and it is a new card, get a refund.
I recently bought a 16GB from Ebay and they sent refund without even asking for the card back so I know you can get some dodgy Micro SD Cards.
Good luck
Click to expand...
Click to collapse
I had a problem getting CWM to load also. It finally worked once I deleted the volume name and reformatted.

How to recover bricked (locked) SD card by WP7

If you have ruined your Micro SD by installing WP7 over it, here is the solution;
First and the fastest solution is to find a friend with a Nokia symbian phone like N8. Insert the card into the phone, phone says "locked SD" press cancel when it attempts for unclock code. Then use tools menu and select reformat. Get along well with that friend if you ever plan to flash WP7 again.
Second solution is to flash a NAND Android build with working USB storage while keeping the same card in the HD2. When flashing Android recognizes the card and creates a 200 MB partition on it. So this seems to be your card's new capacity. After flashing connect to a PC and select USB storage mode. Now you are done with the HD2, leave it connected in this state.
Windows (Win7 in my case) can see and even quick format the card as USB drive. However you need to low level format with flash erase. Search the forum (or use google) and get the program "SDFormatter V2.9.0.5" of Panasonic. Install it to your PC. When you run it, pick your SD drive, click options, choose Full (Erase ON) in the Format Type and "ON" in the format size adjustment tab. Then click format on the main window. Now you can leave and find something else to kill your time. Depending on the size of your SD this may take a few hours. When it is done, congratulations, you have recovered your SD. Depending on the assigned allocation unit size, Android may not recognize your SD, but your PC surely does. in this case, you need to quick format your SD with Win 7 or another program by choosing default allocation size.
The point here is, if Android recognizes the card, which means it can bypass the "Secure Digital" locking mechanism, then SD is not "secured" anymore and we should be able to format it to the proper capacity in the same way it automatically does for the preset 200MB. I guess lock is somehow removed by MAGLDR (or Android) and we only need to wipe out everything on the SD.

I just reflashed Android(NAND), then reformatted sd card and have 14GB space available. Then saw this post. Will do rest to get all of my SDCard back. Thanks.

SDFormatter v3.0 (BETA)
I had the same problem with WP7 "shrinking" my card. After reading this thread, I searched for SDFormatter and found BETA v3.0. Using that, I was able to just put my card into my PC's card reader and do a format, and got my full 16Gb back.
Just make sure you choose FORMAT TYPE as "FULL" (Erase or OverWrite -- I used "Erase" but I doubt it matters), and most importantly, set FORMAT SIZE ADJUSTMENT to "On."

okay, i've tried using minitools partition to try and delete the 200mb partition and then recreate the entire 16gb that is my microsd as well as sdformatter with full (erase as well as overwrite) with size adjustment on but the problem is that i can only see one partition, the 200mb partition, i can't even see the the second partition or whatever that wp7 created
anyone have any other solutions?

When SDFormatter finished formatting your card, you should have gotten a pop-up giving you the results and listing the size of the card.
On that pop-up, did it say 200MB or had it changed to 14.8GB (which is the usable space on a 16GB card)?
Sent from my HTC HD2 using XDA App

Just simply flash WinMo and use HTC's SD Card format tool in it, works fine (I did it myself that way).

When you format, you format a partition.
WM7 creates 2 partitions, the first one 200Mb and the rest of the SD for the 2nd.
To recover the SD:
1/ delete all partitions (I used EASEUS but many other soft will work, Win7 disk managment will not)
2/ create a new partition
3/ format it.
When I can't recover a disk I use a bootable distri of Linux, it's powerful to manage disks (sorry I've lost my disk so google will be your friend).

Great!
worked but had to do it via card reader on computer. Found SDFormatter V 3.0 and set to full erase and overwrite. Took about an hour but got my memory back! Thanks!

Nokia E51 did the trick
Just to confirm that a humble Nokia E51 was good enough to format an encrypted SDHC 16GB Kingstone Class 4.
After doctor Nokia's cure, I was able to recover all the space, I then used "SD Formatter 3.1" tool in order to totally clean up the card, just in case.
Repeated the trick also against a 16GB SDHC Class 10 Trascend, same great result
HTH

Nothing worked
Tried 5 Nokia phones (no E51 unfortunately), some of them ask for a password even if I say Format or delete the password. Some say that the card is corrupted and refuse to format it. Can anyone advise anything. I have an original SanDisk 16 gb SDHC class 2 card from HD2 T-Mobile. It was locked by WP and I cannot use it anymore.
Any advise will be much appreciated !!

OP's advice doesn't work?
Oh.
I assume that you got rid of it by installing Android. And I assume you haven't got rid of your HD2 yet. If second assumption is wrong, you may go and look for a device that can see the card. If only the first is wrong, skip the next paragraph.
Flash WP7 again. Updating it isn't necessary, but the tool may not work.
Download DEV_STORAGELOCK.cab from here. Send it to your device through WP7 Cab Sender. If you don't have it, download it from here. If you don't know how to use it - put the .cab next to the "WP7 Update Cab Sender.bat" file.
Use it. Double-click that .bat file, exit Zune, wait few seconds and press S. It doesn't work? Install the tool from "if needed install this tool" folder. No need to reboot, just go to that .bat file and press S again. The phone will reboot and the cab will be installed. On the phone tap that key icon, tap OK and ta-dah - the card is unlocked. Turn off WP7, take the card out, use it. Optional - get rid of WP7.

Thank you for your reply. I still have HD2 and it runs Mango just fine. The thing is that 16 gb card was the one that didn't want to work properly with WP. So I bought another one (not one ))) ) Transcend 8gb class 4 and it works fine. So, right now I have one useless 16gb card and I decided to bring it back to life. My only concern, If I switch the cards, will I loose any data on my 8 gig card (I have installed all soft that I need, and I do not want to loose it ), or maybe my phone will start to behave strange? I'm really tired of hard resets and re-installs.
Thank you in advance.
PS
That is why I was trying Nokia "trick"

No, the files should be there. But! WP7 may not boot and tell you that you have to use your 8gb sd. If it doesnt - good, you may unlock it. If it does, then... You will need to hardreset WP7 and that deletes all your files. Or turn it off and go back to your working card and look for devices that may see and format your 16gb.
Sent from my iPod touch using Tapatalk

Thanks, will try what you suggested

good job man..

All of this doesn't seem to work for me. I keep ending up in a boot loop when trying the DEV_STORAGELOCK method. The only WP7 version that i can get to work is XBmod 7004 as the HD2 also ends up in a boot loop when i try to update it. My pc won't recognize my card in any way. And the sad thing is that I only have 1 card with me at the moment. any solutions??

Haven't read the whole thread but Panasonic's SD formatter works a treat if you have access to anything that can mount the SD card to a PC.
Sent from my GT-I9100 using XDA App

anyone here who also had the problem that even SD formatter cannot repair the SD card?

well before formating any way to get the data on the SD card back? 16GB SD card is like 10-15 USD its not a big issue if u lose the card, but the issue actually is in the data that we might loose

If u want to get back your data u can use O&O Disk Recovery. This program restored my files from formatted and locked SD card.

[Q] Android can't see MicroSD card

As said, Android can't see my SD. I have CleanDroid installed on NAND.
When I insert the SD in the phone, appears an icon on the top that says "Now it's possible to remove the SD safely". If i remove the SD it says that it's removed, and when i reinsert it, again "Now it's possible to remove the SD safely". Obviously i can't install apps in the sd through "APP2SD", can't use Waze cuz it says that doesn't find the SD card in the phone, the same appears with the camera that tells that if i want use camera i need to insert an SD. BUT THE SD IS STILL THERE!!! what do I wrong with it?
I tried to change my 8GB SD with a friend's 2GB SD... but still the same. I tried to go in Settings, Memory, "Install SD" too, but it only tells again that i can remove the sd safely...WHAT THE HELL I WROOOOOOONG?!?!?!?! xD
EDIT: I forgot, i tried to change the ROM too, tried about 5-6 different ROMs but it still doesn't work...

Did you try formatting with Panasonic formatter?
You're just inserting the SD card right? You're not pressing amount SD card in settings right?

Its look your cards r not compatible with HD2 card reader. I had same issue with about 3 or 4 cards.
The best way is to use genuine SanDisk cards !

rikardo1979 said:
Its look your cards r not compatible with HD2 card reader. I had same issue with about 3 or 4 cards.
The best way is to use genuine SanDisk cards !
Click to expand...
Click to collapse
Kailkti said:
Did you try formatting with Panasonic formatter?
You're just inserting the SD card right? You're not pressing amount SD card in settings right?
Click to expand...
Click to collapse
but...it's impossible! simply cuz with wm6.5 and wp7 it works perfectly! And on the PC too! In fact yesterday i came back to wm6.5 and the SD works well...

Just format it. ._.

i've tried to format it in ntfs, fat32 & extFat...don't work.... :'(

fdm91xda said:
i've tried to format it in ntfs, fat32 & extFat...don't work.... :'(
Click to expand...
Click to collapse
hi guys, there is an update: today i woke up and tried again to insert an sd card. If it's formatted in NTFS or in exFat it says "The SD is damaged. Do u want to try to format?". So i answer yes, it formats the card and then says again the same thing "The SD is damaged. Do u....". From there whatever SD i will insert wont work cuz it will say the same thing. If i try to insert a 2GB Sandisk SD it wont work, the same for my 8GB Kingston and everything else. If i flash again the ROM (the same or another) it tells only that I can safely remove the SD card...BUT I DON'T WANT TO REMOVE IT! I WANT TO USE IT!!! xD so i think my problem is something like a "loop". The telephone remembers his last one choiche and whatever I will do it will give me the same response for every SD. If I format it will be the same...
IS IT POSSIBLE THAT I'M THE ONLY ONE PERSON WITH THIS FU*** PROBLEM???

I sometimes have this problem - it sometimes does what you describe or says that the card is Damaged.
The only way i've found to fix this issue is to format the Card on a Linux machine - i have a laptop that i can dual boot with Ubuntu - i remove the partitions on the card and format it fresh to NTFS using the Disk Tools in Ubuntu and it works a charm every time....
Hope this helps - it is a bit of an annoying issue!
Cheers
Paul

paulrgod said:
I sometimes have this problem - it sometimes does what you describe or says that the card is Damaged.
The only way i've found to fix this issue is to format the Card on a Linux machine - i have a laptop that i can dual boot with Ubuntu - i remove the partitions on the card and format it fresh to NTFS using the Disk Tools in Ubuntu and it works a charm every time....
Hope this helps - it is a bit of an annoying issue!
Cheers
Paul
Click to expand...
Click to collapse
THANKS PAUL!!!!! I have BackTrack on my laptop cuz i need it at the university, but it's based on Ubuntu so i'll try to format my sd from there and try to format the sd from there! I'll let u know if I solved the problem! MANY THANKS!!!!!

fdm91xda said:
THANKS PAUL!!!!! I have BackTrack on my laptop cuz i need it at the university, but it's based on Ubuntu so i'll try to format my sd from there and try to format the sd from there! I'll let u know if I solved the problem! MANY THANKS!!!!!
Click to expand...
Click to collapse
Good Luck mate - i know how annoying this issue is!

16GB SD Card is Dead

OK so having decent knowledge of how filesystems work, while trying to partition my SD with Minitool like in one of these tutorials on here, to make a second partition on it that's EXT3, minitool died and now it barely recognises the SD.
So - say I load magloader to USB MassStorage and then I can see it in Minitool as Unallocated but when I try to create the partition it stops for a while and then finishes really fast telling me it finished and afterwards the whole disk disappears from Minitool and magloader's stuck.
I tried HP Format tool, it's saying "Disk is write-protected".
I tried Harddisk Low Level Format Tool... errors, nothing more.
Currently trying Minitool Power Data Recovery... so far it says "Files Identified: 38" so that might be promising but...
If anyone knows how to get their SD unstuck ------ another detail... I can only mess with the SD card through MAGLDR, my HD2 didn't come with a SD adapter..
Please help me out
Best regards,
John

basicaly your problem is cos u trying to do it from
magldr. that's bad idea. u really need card reader for that !!!
ionutzu said:
OK so having decent knowledge of how filesystems work, while trying to partition my SD with Minitool like in one of these tutorials on here, to make a second partition on it that's EXT3, minitool died and now it barely recognises the SD.
So - say I load magloader to USB MassStorage and then I can see it in Minitool as Unallocated but when I try to create the partition it stops for a while and then finishes really fast telling me it finished and afterwards the whole disk disappears from Minitool and magloader's stuck.
I tried HP Format tool, it's saying "Disk is write-protected".
I tried Harddisk Low Level Format Tool... errors, nothing more.
Currently trying Minitool Power Data Recovery... so far it says "Files Identified: 38" so that might be promising but...
If anyone knows how to get their SD unstuck ------ another detail... I can only mess with the SD card through MAGLDR, my HD2 didn't come with a SD adapter..
Please help me out
Best regards,
John
Click to expand...
Click to collapse
Sent from my HD2 Jaws MIUI using XDA Premium

Yeah, it's basically what Rikardo said, MAGLDR can corrupt files and isn't the best way to mess around with your SD card. Try install CWM and do it that way, much more stable.
You should really invest in a card reader though.

Install wm6.5 on your hd2 and format it from the phone. I know I stuck a windows phone 7 sd in my hd2 and it totally formatted it and got rid of the partition and all.

lol found a microsd adapter laying around !!! it's working thank you

u can also use any digital camera with sd slot and u can format it in the camera.tested working
Sent from my HD2 Jaws MIUI using XDA Premium

HELP
My sd card is dead i cannot recover the 16 gb sd card unallocated space i cant format anymore my pc wont recognize it it would say unknown space

My HD2 is already an SD card killer.
It begins with the "there is an problem with your SD Card message" and it ends with lost of all data and an unformatable sd card.
My HD2 killed 3 SD Cards, 2 of them -> SDHC

I know my hd2 killed two 16 gb sd cards i cant recover i tried this video http://www.youtube.com/watch?v=PKl2dvzDa5U and its directions but i cant make it work it says that the driver is not supported

gezzy19 said:
I know my hd2 killed two 16 gb sd cards i cant recover i tried this video http://www.youtube.com/watch?v=PKl2dvzDa5U and its directions but i cant make it work it says that the driver is not supported
Click to expand...
Click to collapse
ever tried panasonic formatter and do a full format not quick
https://www.sdcard.org/consumers/formatter_3/

yes thats the one from the video it cant be formated .... it says its unallocated the whole card using EASEUS and but when i have it on windows phone 7 it shows the amount of memory yet when i have it on my pc is not formated and unknown capacity? idk why is my card acting up but two 16 gb just went to waste ...i wish there was a way to delete microsoft wp7 scrypt