Hi
I have searched but couldnt find anything before you ask
i was hoping there is an ap out there that can increase the volume of the sound that comes out of the ear piece.
Any one heard of anything?
thanks
Tim
digitaly sound have a surden number of bits often 16bit
mex volume would then be 32500 and -32500
if you inc the sound more then the bit resolution then it clip
and the loudest notes will just they as they are because you cant
really inc them more then they al ready are
when those sampled bits comes to the digital to analog converter which feed the headset they are made into a sound signal
so you cant really do it unless you convert all sounds on the fly and sounds which already use the full bit range would be cliped and sound horrible
my sugestions is made the sounds you require to be louder, louder on the pc and test the results to see if the sound gets a poor quality by the inc
or get a headset with an amp (those require batteries) and let them inc the volume of your signal
I've seen a lot of posts about volume being too quiet, but none about being too loud. I have a Jabra wired in-ear stereo headset, and putting the system volume to it's lowest, non-muted, setting of 20% while turning down the volume of Slide2Play to it's lowest, it is still too loud. It's not too loud to listen to, I just mean I want to be able to make it barely audible if I have to, for instance if a co-worker says something I don't want to be forced to take the headset off.
Is there any way to adjust the volume to somewhere in the 1-19% range rather than 20% being the lowest?
The headset is pretty comfortable, so I'd hate to have to buy an out-of-ear model which I imagine would be less loud at the lowest setting.
Mind you, I don't want to lower the overall volume. I like that it can be loud too, I just need it to be a little more quiet when I'm in the zone trying to bend a piece of code or SQL statement to my will so I don't miss what people say around me.. hehe.
just open ur headset and put a higher value resistor in it.
hope u understand my words.
Thanks for the advice but I'm not much of an electrician.
I'm more looking for a program, cab or registry tweak that allows for greater control of the volume rather than the simple Mute, Quiet, Medium, Loud, Louder, Very Loud settings that our BAs come with.
I found a cab that allows you to adjust the bass and treble which was very handy, but I can't seem to find one that allows more refined volume levels all around.
hv u tried the SRS WOW HD? it has a tab to adjust the input and output gain it decreases the volume level.
sschrupp said:
Thanks for the advice but I'm not much of an electrician.
I'm more looking for a program, cab or registry tweak that allows for greater control of the volume rather than the simple Mute, Quiet, Medium, Loud, Louder, Very Loud settings that our BAs come with.
I found a cab that allows you to adjust the bass and treble which was very handy, but I can't seem to find one that allows more refined volume levels all around.
Click to expand...
Click to collapse
Hmm, that SRS WOW HD does help. Although it seems to like to completely mute my device if I unplug my headphones, or plug them in. It kind of seems like I need to reset the device after I plug or unplug my headset.
Kind of annoying, but music does sound better and I can make it more quiet. Thanks for the suggestion.
Anyone know how to keep it from disabling sound on my device when I plug/unplug my headset?
hi everybody i love my legend but i'm really disappointed with this issue: even at the minimum, the volume is too loud too listen it with hearphones...
Is there an app to fix it?
Trying another rom could fix it?
Thk you
Got same issue
logoo said:
hi everybody i love my legend but i'm really disappointed with this issue: even at the minimum, the volume is too loud too listen it with hearphones...
Is there an app to fix it?
Trying another rom could fix it?
Thk you
Click to expand...
Click to collapse
Hey, I agree with what you've said above. I have the same issue. Please note that I have no direct solution for you, but the work around is this:
Use a different set of headphones. I have three sets I use.
1) pair of ear buds that came with the legend - these are fine when I turn the volume down low
2) Phillips SHS3201 - these are basic ""over the ear" hook style ear buds. volume is fine if I turn it down between first second "notches".
3) Monster Audio Turbine ear buds - foam sealing passive noise canceling. These are too loud even at the lowest setting. I think they have powerful drivers that simply boost the sound and foam fittings that drive the sound into my ear canal. Though they sound great, I can't really use them because they are too loud on the phone.
Are you using a high quality or "foam sealing" headphone?
That being said, I'm interested if anyone else knows how to adjust this!
Thanks.
Thk you for your reply I've not found a real solution but you're right i think i'm gonna buy earphones with external volume adjustement because even with the original legend ones, it's too loud
There is another way to fix it but i don't like it.. You can change de volume of your mp3's by using mp3 gain (freeware). The volume is better but if you want to connect the legend to a loudspeaker, you realise that the sound has unfortunately a very limited volume...
I am interested in this as well. I have tried the Music Player with EQ platinum (by changing left and right channel to output lower volume) but it kills the CPU. If you view photos while listening to music, you might not hear any music anymore.
Same here. It gets very annoying when the phone rings while I'm listening to things on my earphone - it hurts my ear everytime. (I have ringer set to max volume, which seems to make the ring tone play at max volume through earphone as well. I can barely stand min volume as it is.)
I've already rooted my phone - I guess changing the audiopara files should do the trick. Can anyone tell me how to understand those files?
Sent from my HTC Legend using XDA App
I am using j-jays intra earphones and the Legend really disappoint me about the sound quality (volume setting).
So I tried to set EQ as down as possible... what there is no EQ on Android's music player? f****!
Finally I have found and used Astro Player beta on the market, wich is not very good-looking but has a complet EQ.
And an other problem about Legend sound quality appears: the sound in noisy at low volume!!!
Ok let's hope a flash will correct the problem. For the moment I am using my Sansa clip+ to hear the music in my bed and my legend with RockPlayer to watch movies in my bed
Volume issue Android
I've been having an issue with the volume being too loud when streaming music via pandora or last.fm
To check to make sure we are all having the same problem, follow these steps and report back.
1. Play media (music) w/ headphones
2. Turn off silent mode
3. Go to Settings/Volume
4. Edit the volume of the ringer (it will play a test sound)
5. Accept changes...
Now, did the volume go down on the media so it's nice and quite? If so, how long does it last? I know this works for me for the rest of my current song, but as soon as another one starts it's back up to crazy loud volume (even when the media volume is set to smallest amount).
I have also downloaded a 3rd party volume control app, but the same thing happens. Please give this a shot and let us know what happened!
Delete please!
But I do have a problem with headphones! The volume level is so low and music feels 'dull' on my Shure SE310s. :-(
Crabby
Oh yeah ... I agree with that
When I use the headphone I can't hear the people I am talking to
Is there a way to boost the volume ?
Especially with this kind of headphone ... the sound should be quite good
Several other threads about this. You need to check/cycle the TV out setting in the Settings for the phone, should clear you up on sound output, but 3rd party headsets won't do voice calls.
I dont know what I am doing wrong but I find the sound level extremely poor for calls
I tried with a bluetooth headset, the outside speaker and the jack with my mp3 headset
it's pretty weird since when I play videos or music I am impressed by how loud I can push the Tab...
I am on AT&T with JMC (but was the same on JM6). And I set the sound at max
anybody has the same issue? Am I doing something wrong? Or is there any sound booster app for calls? (and is it necessary?)
Thanks for your help
My Tab isn't phone-enabled, but since you're new to Android, I thought I should point out that there are multiple volume settings, and in-call volume is one of them. Menu Key -> Settings -> Sound Settings -> Volume should give you all the sliders (Ringtone, Media, Alarm, System, Notification...). There are apps/widgets too that let you get to/change these settings without having to go into the settings menu every time (audio manager has been a decent widget for me). Until you're actually in the call the hardware rocker is usually doing the ringtone or media volume.
When I use mine with Skype 60% is usually blaringly loud for me, and I don't even have the system or media volume maxed out.
Sorry if it's something you know you've done, but thought it might help. If not, maybe someone else has had the same issue and solved it.
BuglessFan said:
My Tab isn't phone-enabled, but since you're new to Android, I thought I should point out that there are multiple volume settings, and in-call volume is one of them. Menu Key -> Settings -> Sound Settings -> Volume should give you all the sliders (Ringtone, Media, Alarm, System, Notification...). There are apps/widgets too that let you get to/change these settings without having to go into the settings menu every time (audio manager has been a decent widget for me). Until you're actually in the call the hardware rocker is usually doing the ringtone or media volume.
When I use mine with Skype 60% is usually blaringly loud for me, and I don't even have the system or media volume maxed out.
Sorry if it's something you know you've done, but thought it might help. If not, maybe someone else has had the same issue and solved it.
Click to expand...
Click to collapse
yes this I had figured out and set at the maximum
Everything non call related is really strong... It's conversation from normal calls that is ridiculously low
Am I the only one ?? What's wrong with my tab ?
Anyone with an opinion about this ?
Voice-enabled on AT&T with JM6. Have good results with the built-in speakers and cheap Nokia BH-214 stereo Bluetooth earbuds. I ordered the OEM earbuds, but I do understand that the 3.5mm jack port in finicky. Is your Bluetooth 2.1 or newer? Do you have many open applications when trying to place or receive calls? I've notice the sound stutter a bit on the speakers when I've got several apps open.
Here's something I noticed, when in call using my BT Headset, the volume slider sometimes says its on max but the output isnt. Try to lower or increase your volume. Once you hear the max level beep, it gets louder.
Im on a SingTel Tab by the way.
ishtangli said:
Here's something I noticed, when in call using my BT Headset, the volume slider sometimes says its on max but the output isnt. Try to lower or increase your volume. Once you hear the max level beep, it gets louder.
Im on a SingTel Tab by the way.
Click to expand...
Click to collapse
Thank you, will try right away
Edit: yeah I can definitely reduce the volume but my max was my actual max. As anybody tried to compare the volume on the speaker when playing music whith the volume on the speaker when on a call... It's like 5 to 10 times higher volume on a call !! And then same issue on a headset
DonDerham said:
Voice-enabled on AT&T with JM6. Have good results with the built-in speakers and cheap Nokia BH-214 stereo Bluetooth earbuds. I ordered the OEM earbuds, but I do understand that the 3.5mm jack port in finicky. Is your Bluetooth 2.1 or newer? Do you have many open applications when trying to place or receive calls? I've notice the sound stutter a bit on the speakers when I've got several apps open.
Click to expand...
Click to collapse
As mentioned I tried it with everything I could... The default external speaker, a simple stereo headset (Not bluetooth), a bluetooth headset. They all give the same. Low volume
If you don't like volume in speaker, headset, bluetooth....You can change settings in "hidden" Audio menu. There you can change volume of individual ouput, but be careful!!!!!
Before change anything, make sure you can put it back the same number if you are not satisfied or have problem ..so wright it somewhere anything you wish to change.
Good Luck with experiment. If I remember correctly(from my old Samsung i780-Windows phone) "TX" settings is for output and "RX" for imput, but I can be wrong, so be careful.
Alcibiade said:
Thank you, will try right away
Edit: yeah I can definitely reduce the volume but my max was my actual max. As anybody tried to compare the volume on the speaker when playing music whith the volume on the speaker when on a call... It's like 5 to 10 times higher volume on a call !! And then same issue on a headset
Click to expand...
Click to collapse
what I do is, when in a call, I lower the volume by about 2, then increase it until i hear the max volume beep. The moment i hear it, the volume on my headset usually jumps up.
I have the same problem with the speaker volume. At maximum you cannot hear it. The bluetooth seems to work OK. IIRC JK5 software seemed to work correctly.
09CarreraS said:
I have the same problem with the speaker volume. At maximum you cannot hear it. The bluetooth seems to work OK. IIRC JK5 software seemed to work correctly.
Click to expand...
Click to collapse
So I guess for you too, music or movies play with a high volume on the speakers whereas for calls it's rather low volume ?
Yes bluetooth or headset I can hear but still quite low volume compared with music...
stefanopolis said:
If you don't like volume in speaker, headset, bluetooth....You can change settings in "hidden" Audio menu. There you can change volume of individual ouput, but be careful!!!!!
Before change anything, make sure you can put it back the same number if you are not satisfied or have problem ..so wright it somewhere anything you wish to change.
Good Luck with experiment. If I remember correctly(from my old Samsung i780-Windows phone) "TX" settings is for output and "RX" for imput, but I can be wrong, so be careful.
Click to expand...
Click to collapse
My problem is specifically for calls. Anything else is fine and working well. That's the weird issue... I dont want to boost the volume for anything else!
That's pretty weird... I have been playing with the tab and I found out that for calls, the highest level I can have (by hear) is two notches below the highest. That's by far the loudest I get (If I push higher the sound decreases)
Am I the only one ? It really pisses me off.... I don't know how it can be like that (I am on JMC ROM after flashing a JM6 ROM over the JK5 from Russia (I am on an AT&T Tab flashed to get phone working)
Someone else get the same experience ?
I can confirm that the max 'in call' volume is two notch below the max !!! And I have the same tab/setting of the OP.
Aren't there some codes you can enter to adjust the volume level on calls and music, etc.?? like the Galaxy S?
pakalrtb said:
I can confirm that the max 'in call' volume is two notch below the max !!! And I have the same tab/setting of the OP.
Click to expand...
Click to collapse
Thanks ! Ina sense I am a littel bit relieved to see I am not the only one !
Such a stupid bug. Come on Samsung...
FYI it is fixed with the firmware JME
Sound level is much more acceptable and the highest level is not anymore two notched below the max