Database Users

CM7 Help

So here is my situation
I got my NC in February and rooted it before updating to B&N 1.1
I would like to get it running CM7 but also be Dual Boot.
How should i go about this, do i need to Erase deregister and reroot? im sure this has been asked before somewhere in the back pages of this forum, any help or even a link to help would be great. i also don't want to lose my data.
Thanks

If you just want to try something new, use Rom Manager from the Market to backup your system to your sdcard. Then you can install CM7 using Rom Manager and restore what you have now when done. Dual booting is a little harder, what I used to do was make a bootable sdcard. Dualboot Phiremod / Honeycomb Image for SDcard is a good way to go, here is a link http://forum.xda-developers.com/showthread.php?t=1045018

How to avoid the nook boot loop problem before or after Adobe auto-updates

Update 20111117: Updated .zip file to Adobe Flash 11.1 and AIR 3.1.
Update 20111020: Updated .zip file to reinstall Flash and AIR, previous version didn't properly fix AIR.
Steps I used to update Adobe Flash (to version 11.0) and AIR (version 3.0) so it doesn't update automatically and thus get me back into the boot loop cycle (again):
Go to Titanium Backup ( Pro )
You need to uninstall with this since these are system apps
Buy a Pro key and keep it on your SD card root, since this app will save your bacon
Uninstall Adobe AIR and Adobe Flash Player from Titanium Backup
It will warn you that you are uninstalling a system app, that's OK
I think that is why the update through Market isn't working
Open Market, Install Adobe Air (3.1.0.488 as of this post) and Adobe Flash Player (version 11.1 11.1.102.59 as of this post)
Nook seems to be working after several reboots. Also, note that Adobe updated their apps. After following the procedure above, I was able to update via Market without any problems with bootlooping.
Obviously, the above steps only work BEFORE Adobe gets auto-updated and you get in the boot loop cycle. If you are already in the boot loop cycle, download this file (Updated link, should work better this time):
FlashPlayer11.1_AIR3.1_Update_Fix_20111117
and install it using a ClockworkMod Recovery SD card.
Get a ClockworkMod Recovery SD card
http://forum.xda-developers.com/showthread.php?p=11987469
Put the zip from the above post on the SD card
Reboot your Nook with the SD card inserted
Install from Zip, Select zip from SD card, select the flash update
This basically will uninstall flash and air as system apps and install as a user apps. This is based on the zip from GMPOWER which updated flash to 10.3, which worked for some but not others, perhaps because it didn't touch Air:
http://forum.xda-developers.com/showpost.php?p=16526691&postcount=7
Also note, I have been through several cycles of restoring backups, restoring to factory, re-rooting, etc. this last week, so I was getting very annoyed and cautious. I think I was able narrow it down to just the Adobe updates causing my problems. I have been able to update ROM Manager, Superuser, and just about everything else with updates; and besides the Adobe updates, everthing worked, and I don't currently have a boot loop problem.
Note, I didn't update Superuser or ROM Manager until after I applied the above updates to Flash and AIR. After several reboots, my Nook is still working fine.
For those of you who are still having trouble getting your Nook back, and the attached zip doesn't work for you, you can do the following. Using the instructions on this site, I got my Nook back up and running to factory new condition:
http://mrm3.net/nook-color-recover-any-bricked-device/
(Quick method at top, not older methods below; instructions slimmed down from several posts here at XDA, updated for stock 1.2) also here on XDA:
http://forum.xda-developers.com/showthread.php?t=914690 (original restore to stock post)
http://forum.xda-developers.com/showthread.php?t=1050520 (update for stock rom 1.2)
Then, I registered my Nook (again).
At this point, I could have tried to update to 1.3, but my patience was a bit low, so I didn't go for it. If you do, be sure to follow the appropriate ManualNooter instructions here:
http://forum.xda-developers.com/showthread.php?t=1054027
Since I was still on Stock 1.2, I rooted using ManualNooter 4.6.16
(while in CMR, after running ManualNooter, I also applied update-Froyo1.2-dalingrin-OC-emmc-090111.zip, and that seemed to work without a hitch)
Then I reinstalled all the other apps I wanted on my Nook,
=== BUT DID NOT YET UPDATE ADOBE FLASH OR AIR ===
Flashed ClockworkMod Recovery, updated a lot of my apps using Market and Amazon Appstore, restored data and other apps from Titanium Backup,
Then I made a full backup of my Nook using CMR. (still booting normal, running fast and clean)
After confirming my Nook was as I wanted it, and that I had a good backup, I did the steps at the top of this post to update Adobe Flash and AIR.
After confirming that was working, and getting another backup on my SD. I then did the updates to ROM Manager and Superuser. It seemed like those updates happened at the same time as the boot loop, so I was cautious. My Nook is still working well without boot loops as of yet.
Results:
Kernel: Stock 1.2
Rooted with: ManualNooter 4.6.16
Additional Mods:
update-Froyo1.2-dalingrin-OC-emmc-090111.zip,
ClockworkMod Recovery 3.2.0.1,
ROM Manager 4.5.0.1, Titanium Backup 4.5.2,
Adobe Flash 11.1, Adobe AIR 3.1 (uninstalled system app, reinstalled via Market, updated via Market)

[Update Zip] CMR zip to update Flash Player and Air
I updated the original post with a link to the zip to fix the FlashPlayer and Air apps. I had intended to post it here, but since I'm new, I can't link externally in a reply.
Please let me know if there are any problems with the zip and I will get it updated. It worked on my Nook.
I updated the zip file 20111020 to fix a problem with the AIR reinstall.

Wow, thank you so much for this! I wish I had known this on the weekend when I was gong crazy trying to figure out why I was getting bootloops over and over. I can't seem to give you thanks though (probably because I never post, just lurk).
So far I haven't done the uninstall/re-install with TB. I am just making sure my Adobe air and Flash don't update, and when Air did I went into Nook Color Tools and uninstalled the update to set it back to what it was originally. That worked but it is a pain if it keeps happening. I will try the TB to uninsall the programs.
I too did a update on ROM Manager and Superuser (and a binary update), and all is still well. No bootloops. I hold my breath though every time my NC gets to the "color" part until the N appears and it all disolves.

thanks for this!!! this was really getting very frustrating.

Well while I would like to report that the flash fix worked, it didn't. It was already on the boot loop so I installed the update with a flashed SD card and nothing. Still stuck in a boot loop. At this point I am just about ready to give up on this device being a fully functional tablet.

Thanks for this information. My nc is currently in a bootloop and won't load CWR. It shuts off before getting to that point (my bootloop is adobe air related). None of the restore to stock via SD card have worked for me. I'm now looking at ADB options, the post you referenced with the fix has some instructions for that. Did you use the ADB or the SD card instructions? I was actually rooted with CM7 before the bootloop.
Thanks,

shy guy1 said:
Well while I would like to report that the flash fix worked, it didn't. It was already on the boot loop so I installed the update with a flashed SD card and nothing. Still stuck in a boot loop. At this point I am just about ready to give up on this device being a fully functional tablet.
Click to expand...
Click to collapse
I realized that my zip was not working to uninstall and reinstall Air properly. Try the updated zip file in the post.

shelly29 said:
Did you use the ADB or the SD card instructions?
Click to expand...
Click to collapse
I used the SD card instructions. Unless you have done something strange to your nook (not sure what), it should always boot from the SD card first, so you should never have problems booting into CMR from an SD card.
If the link in the original post doesn't work for you to get a CMR SD card, try the instructions here:
http://mrm3.net/nook-color-updated-clockwork-recovery-bootable-sd/
If you have a newer Nook, you may need to repartition your Nook's internal memory and use CMR version 3.2.0.1. See details here (this guy just condenses the instructions you can find on various posts on XDA, and tries to keep it up-to-date)
http://mrm3.net/nook-color-how-to-blue-dot-nook-color/
Also note that I updated the zip file in the post to correctly uninstall and reinstall Flash. I re=bootlooped my nook, and after applying the new zip, my nook was working.

Just an update....
I wanted to let U guys know that I had updated Adobe Flash, Air and Super Users and this has worked for me. I also went to double check the versions of both Flash an Air and they are the newest versions!? I still went to uncheck the "Update Automatically" setting in the market for them both just in case for future updates for the time being. Back up and Running! Thanks Again to ALL involved who put contributions to this

This may have worked for me
I tried the updated fix posted here, and the Nook booted properly. Thank you for this fix; I hope it continues to work for me.
I will have to locate the automated back up mentioned here (Titanium), and I will see how this works. I had been leaving my Nook on at all times to avoid the reboot until I turned it off yesterday, forgetting that I did not want to do that.

Awesome post.
So...after all this is said and done and I manage to get a restore image to load and actually boot, now the library doesn't sync and the shop won't load and I get error messages such as " internal error exception executing the command ". It is like the B&N servers are confused. Any ideas about that?

I'm having the boot loop issue and neither the zip nor the 1.2 restore work to get past it. Does anyone have any ideas?

Thanks!!!! You are my new best friend. XD I ended up reflashing several times before I found this post. Followed the instructions and my Nook is happily running Android again without reinstalling (again!). I thank you. My Nook thanks you. And the Angry Birds who would have had to start from scratch thank you.

Thank you! It appears to work now. I've restarted a few times with success!

Took me about an hour to find this thead. I knew there would be an easier fix than starting from scratch. The zip worked on my rooted 1.2
Thanks! Keep up the good work

Thanks! That worked for me.

Stagnation1 said:
I'm having the boot loop issue and neither the zip nor the 1.2 restore work to get past it. Does anyone have any ideas?
Click to expand...
Click to collapse
From my previous searches, it seems the boot loop is usually caused by either an incompatible installation of Adobe flash, or an incompatible kernel (central part of the ROM). Hopefully the OP zip will fix the first, but I'm not sure of another way to fix the second, other than reflashing and rerooting. How far in the reflash/reroot process do you get before it boot loops again?

mastigia said:
So...after all this is said and done and I manage to get a restore image to load and actually boot, now the library doesn't sync and the shop won't load and I get error messages such as " internal error exception executing the command ". It is like the B&N servers are confused. Any ideas about that?
Click to expand...
Click to collapse
Hmm, haven't seen that error. I'm not sure whether its related to the same problem. It sounds like you might need to re-register your nook with B&N. I'm not sure if you can do this without restoring to stock. Not much help, sorry.

I can't post a reply to this ([NC][1.2][1.3] ManualNooter 4.6.16) thread yet - Still new to these forums... I was one of the many in that thread who had installed ManualNooter 4.6.16 on Nook Stock 1.3 only to end up with a boot loop.
Wish I had found this thread last week - would have saved me a lot of headaches!
It's okay though - every boot loop is another opportunity to learn something new.
Thanks much for the easy walkthrough and I hope others find their way here too.

Just saw another new update for Flash & Air .. released yesterday I believe. Has anyone try them yet ? Just don't want to was my time getting into a boot loop again by updating it.
--

way behind.. rooted 1.01 -> 1.3 + CM7???

I havent been able to keep up with NC development as much as I'd like, so after reading many directions and many posts I figured it'd be faster to tap the collective wisdom...
Current setup:: first gen nook, 1.01 rooted with autonooter. (no Clockwork)
Desired setup:: updated to 1.3 with root (i like the ability to jump from ereader to tablet) and CM7.1 on an SD card..
I was thinking of just 8 booting it to restore to stock, then upgrading to 1.3 and using manualnooter... Could I flash that update without the restore step?
then using [http://forum.xda-developers.com/showthread.php?t=1000957] to get CM7 working..
Is that all correct? I just want a sanity check before i start flashing.

Running CM7 off uSD is a completely separated procedure with no interference with whatever on the internal memory.
You can start it off w/o waiting.

Just in case anyone else is curious. I created a CWM sd, loaded it with both the 1.01 stock flash and 1.2 stock flash.. flashed each. then copied 1.3 over per B&N directions, let that install. then finished up by booting again off the CWM disk and ran MN 4.5.18, 4.6.16
Now im stock rooted and very happy. Thanks to all the developers who created these wonderful tools.

Nook wont boot up

Hey, i'm new. Just made this account to get help with my nook. Anyway i'll just tell you all what happened because i don't know much about it.
There's two problems i have with it. 1 - Can't sync my google account and 2 - Can't get past the boot animation, keeps re-booting
BTW just got the nook color second hand yesterday, he said it had Android 2.2? on it, not too sure. He also said he did a factory reset on it, hence me trying to link my google account etc. As of right now, i'm not sure if it is rooted or has a ROM? or anything, i just want it going again.
Problem 1 - It was going fine and I was setting it up with the android start up thingy on the screen, but no matter what I tried I couldn't sync my google account with it to get on the android store. I could go on the internet and gmail etc fine, just nothing that needed a google account synced. I tried the usual fix of signing into YouTube using the gmail account but this still didn't link the device to my google account.
Problem 2 - Just last night when I was reading a book on it, it shut off randomly, I thought thats odd because it was like half battery, so I plugged it in via usb. Now whenever I plug it in to usb. It reboots and reboots and reboots. It shows the touch the future of reading logo, then a grey n, then the screen flashes yellow for a split second. It goes to a screen saying it is installing a new software update, but would cut out part way through and re-start the reboot loop. When i unplug it from the power it shuts off and wont turn on. I tried a factory reset and this started, but when it finished 'clearing data' it cut out and restarted the boot loop. As i'm typing it's next to me continuously re-booting.
Please help!! I'm a noob and need guidance haha.
But seriously thanks to anyone who helps
Joel

It could be trying to do a self repair of / rom and failing. Read about that in my tips thread linked in my signature. Look at item A12.

leapinlar said:
It could be trying to do a self repair of / rom and failing. Read about that in my tips thread linked in my signature. Look at item A12.
Click to expand...
Click to collapse
Thanks for the reply. I think i've got nook version 1.1. thats what it said before it started the boot loop. I'm just wondering what i need to flash to the sd card?
Thanks

longschlongsilver said:
Thanks for the reply. I think i've got nook version 1.1. thats what it said before it started the boot loop. I'm just wondering what i need to flash to the sd card?
Thanks
Click to expand...
Click to collapse
Make yourself a bootable CWM card as in my item A10. Then you can flash whatever you want. A new stock 1.4.3 as I said in A12 or partition repairs as I said in my partition repair thread. Or CM roms. Or the romrestore repair zip. Lots of possibilities.

leapinlar said:
Make yourself a bootable CWM card as in my item A10. Then you can flash whatever you want. A new stock 1.4.3 as I said in A12 or partition repairs as I said in my partition repair thread. Or CM roms. Or the romrestore repair zip. Lots of possibilities.
Click to expand...
Click to collapse
So I make the CWM card. If i flash the stock 1.4.3 is that how it comes originally? Then can i root it from there, then CM7 etc? And is that all compatible with the 1.1 version? sorry for all the questions. and thanks so much! Any ideas on syncing a google account once i get it going?
Cheers

If you want to run stock, flash the 1.4.3 zip that I linked to. It is B&N's lastest version of stock (newer than 1.1) that I modified so it can be flashed with CWM. Then go to Manual Nooter 5.02.19. That will root you and allow you to install other apps.
Or if you want CM, just flash the version you want followed by the appropriate gapps zip. You do not need to update stock first, just flash away.
It is a good idea when switching types of roms to wipe first. You can flash my format 5,6,7 zip to wipe if you want.
Edit: After rereading your first post, you must get out of your bootloop before you can run anything. Just flashing a new rom may not fix it. If it does, great, but you may need to flash some repair zips first. And if you wipe, that may fix your Google login issues.

leapinlar said:
If you want to run stock, flash the 1.4.3 zip that I linked to. It is B&N's lastest version of stock (newer than 1.1) that I modified so it can be flashed with CWM. Then go to Manual Nooter 5.02.19. That will root you and allow you to install other apps.
Or if you want CM, just flash the version you want followed by the appropriate gapps zip. You do not need to update stock first, just flash away.
It is a good idea when switching types of roms to wipe first. You can flash my format 5,6,7 zip to wipe if you want.
Edit: After rereading your first post, you must get out of your bootloop before you can run anything. Just flashing a new rom may not fix it. If it does, great, but you may need to flash some repair zips first. And if you wipe, that may fix your Google login issues.
Click to expand...
Click to collapse
Sorry for my noobness but what does flash and wipe mean? Never done this before. I just got an sd card reader thing so i can write things on it with win32 disk imager. So to get out of the boot loop i have to flash? a repair zip? I had a look on the help post of yours, would 'NookColor-emmc-stockrecovery-CWM5504asAlt.zip' work? and do i write the whole zip file on the sd card without extracting anything? then what would i do? just turn it on? sorry once again you're a huge help

The first thing you do is unzip the file cwm-5.5.0.4-bootable_SD.zip. That will give a file about 200MB in size with a .img file name. Use win32diskimager to burn that .img file to your SD. Then that card can be used to copy (flash) things to your internal memory to either fix it or put new roms on it. If you put that card in the nook and boot up from a powered off state, the CWM program should start. You can use that to put new things on your internal memory.
Wipe means to format or erase things. Sometimes it is important to wipe what is already there before you try to put new things on.
Given your description of the problem, I would burn the CWM to SD, copy the zip named romrestore-CWMflashable.zip to the SD with your PC, put the SD in the nook, boot and the CWM menu should come up. Select "install zip from SD" and hit the n button. Then select "choose zip from SD" and hit n. Then scroll to the file you copied and hit n. Confirm the choice and CWM will begin it's thing. Watch for error messages. If it completes successfully, power off and remove the SD and see if it will boot. If it does boot successfully, you just repaired it. If it did not repair it, go to my partition repair thread and try some of those repair zips using the same technique.
If you were successful with the repairs, you can use the CWM SD to flash new roms to internal memory (stock or CM). Don't forget to wipe first if you do. An easy, surefire way to wipe is to flash my format 5-6-7 zip on my tips thread.

FIXED! Thanks so much. Gonna root now and then install cm7 or something haha, thanks again for your patience!

[Q] Eyeballer mostly working, Gapps not working

I installed CM9 Eyeballer the other day on my NC. It pretty much works, but if I go into the web browser or any other factory-installed app, hitting the "N" button takes me back to the factory-installed home screen, and I can't find any way to get back to the Android home screen, short of rebooting the device. Is this normal?
Also, I flashed Gapps using gapps-20120429-ics-signed.zip, and the only Google App that appears is Play Store -- I was able to sign in, but the next screen gave me a "Server Error," and that's all it's done since. I verified the md5sum, and also tried again to install it. No change. Is there some version conflict, or something like that?
Edit: did not install CM9, after all. I now have.

What is the 'factory installed home screen'? You mean stock? That is not possible if you installed CM9 over the top of stock on emmc. Can you explain a little more how you installed it and what you mean.

Well...
I followed the directions as closely as I could: create a recovery chip, copy over the zip file (manualnooter-5.08.20-apps2sd.zip), reboot, install from zip file, install Manual Nooter, flash update-Froyo1.2-dalingrin-OC-emmc-090111.zip, install Gapps, reboot again. As far as I could tell, my results were consistent with the directions, up until the symptoms I described. For example, the splash (smash) screen is right, and the rainbow-y thing, and so on.
This partial success is even more frustrating than a total failure.

estebandido said:
I followed the directions as closely as I could: create a recovery chip, copy over the zip file (manualnooter-5.08.20-apps2sd.zip), reboot, install from zip file, install Manual Nooter, flash update-Froyo1.2-dalingrin-OC-emmc-090111.zip, install Gapps, reboot again. As far as I could tell, my results were consistent with the directions, up until the symptoms I described. For example, the splash (smash) screen is right, and the rainbow-y thing, and so on.
This partial success is even more frustrating than a total failure.
Click to expand...
Click to collapse
Your original post said you installed CM9. You did not. You just rooted your stock rom. You might want to edit the title of the post to 'Manual Nooter installed properly, Gapps not working. Then take that CM9 Eyeballer statement out of the text in the first post and you might get some proper responses from folks.

Sure enough.
leapinlar said:
Your original post said you installed CM9. You did not. You just rooted your stock rom.
Click to expand...
Click to collapse
Ah... I was under the impression that Eyeballer was a version name of CM9. None of the sets of instructions I read made it clear to me that wasn't the case.
I ended up doing a factory reset, then reinstalling everything. The picture is far rosier now -- it finally looks the way I pictured!
Thanks!

estebandido said:
Ah... I was under the impression that Eyeballer was a version name of CM9.
Click to expand...
Click to collapse
Eyeballer does build a version of CM9. But that has nothing to do with what you did. You ran Manual Nooter, which is a tool to root your stock installation. CM9 is a completely different version of Android than stock is. And when you install CM9, your stock is completely removed and replaced by CM9.
You do not have CM9 installed, you have just rooted your stock rom.
Anyway, I'm glad you got it working.
Edit: I see you modified your original post to say you did later install CM9.

[ROM][NC] Unofficial CM9 Nightly builds - with/without OpenGL
I don't have enough posts in XDA to post in the (goo dot gl/vPJcM) actual ROM thread so I'm hoping someone will see it here.
After installing the CM7 ROM a long time ago. they Nook wasn't able to boot into CWM. I can only access the recovery using a bootable SD card. That may or may not matter.
Yesterday I installed both the 3 SEP OpenGL and 4 SEP versions of Eyeballers CM9 ROM along with GAPPS. In both versions I cannot get bast the Setup Wizard since it "unfortunately Closed" every time I "touch the Android".
I did install the ROM w/o GAPPS as a temporary fix but will need to eventually access the Play Store.
I did notice that CWM still wont boot into recovery and the Cyanoboot won't either. Cyanoboot takes me to what appears to be a stock Nook screen claiming that an install has failed and that I should power on/off or contact customer service.
Does anybody have any suggestions?
Thanks!
JC

jerrycrabb said:
I did notice that CWM still wont boot into recovery and the Cyanoboot won't either. Cyanoboot takes me to what appears to be a stock Nook screen claiming that an install has failed and that I should power on/off or contact customer service.
Click to expand...
Click to collapse
You do not have CWM installed on internal memory (emmc). That message you are getting means you still have the stock recovery there. You need to flash a CWM to emmc using your bootable CWM card. Look in my tips thread linked in my signature. Look at item A8 and the subheading 'to fix a corrupted or missing recovery on emmc'.
I don't know how to solve your other problem with gapps, other than to do a factory reset with CWM.

From what I can tell, Eyeballer is mostly drinking.

leapinlar said:
You do not have CWM installed on internal memory (emmc). That message you are getting means you still have the stock recovery there. You need to flash a CWM to emmc using your bootable CWM card. Look in my tips thread linked in my signature. Look at item A8 and the subheading 'to fix a corrupted or missing recovery on emmc'.
I don't know how to solve your other problem with gapps, other than to do a factory reset with CWM.
Click to expand...
Click to collapse
Thank you very much for the response, I will try this as soon as I get some time (I have a selfish new baby) and get back.

leapinlar said:
You do not have CWM installed on internal memory (emmc). That message you are getting means you still have the stock recovery there. You need to flash a CWM to emmc using your bootable CWM card. Look in my tips thread linked in my signature. Look at item A8 and the subheading 'to fix a corrupted or missing recovery on emmc'.
I don't know how to solve your other problem with gapps, other than to do a factory reset with CWM.
Click to expand...
Click to collapse
Success! errr..sort of.
Prior to flashing gapps I was able to reboot into CWM. Thank you so much for your help!
Still having the same issue with setup manager after factory reset and wipe of all cache.
If anyone has a work around or another suggestions for CM9 on the NC I'd much appreciate it.
Thanks again.