Related
Hi there,
I've downloaded, unzipped and tried to install the froyo twice on my HTC HD2 but it never seems to complete the installation, it stays on the installation screen like for ever until I get tired and take the batteries out for a restart.
ttott2001 said:
Hi there,
I've downloaded, unzipped and tried to install the froyo twice on my HTC HD2 but it never seems to complete the installation, it stays on the installation screen like for ever until I get tired and take the batteries out for a restart.
Click to expand...
Click to collapse
give it up to 20 minutes on first boot
Thanks for ur response, I'll try it and let u know what happens.
Tried it again and left it to run for like an hr and still nothing happened, but this time I read the proceedings and realized it said "couldnt file root on SD card"
rootfs file might be zipped. If it is unzip it and put it into your android folder. If it is there and not zipped format your SD card and try again. Also what radio are you using? Make sure you copy all the contents into an android folder and then copy the android folder to your SD card as well.
change startup txt. read.
mini_robot said:
change startup txt. read.
______________
dont read this...
Click to expand...
Click to collapse
Haha.
Do only some have to change startup.txt? All I did was move the android folder to my card and I've been rollin' FroyoStone all day, no problems.
Hi guys, i have more then 2 weeks trying to load android on my hd2 and always fail....i tried differents android rooms following the steps.. "from the android folder run CLRAD then Haret" but when is booting always shows this...( failed to find rootfs on sd card..you need to unzip a rootfs ) so i started over everything again but still the same... this is what i got in my phone
R 2.15.50
G15.42.50
D 3.14.04666 8G
and i'm using chukydroid room ...so please somebody can really help me with this ..i'm afraid that my phone get damage and I could never use it!!!
Thanks a lot
What android build are you using?
All you do is drag and drop the android folder on the root of your sd. After that, while booted into windows, use the file explorer to open the android folder. Click on clrad then haret. If you are using chuckydroid rom, you don't need to manually touch haret. Use ebl boot load program and set auto boot.
Can I just ask what size and class of SD card you are installing onto?
polo735 said:
What android build are you using?
All you do is drag and drop the android folder on the root of your sd. After that, while booted into windows, use the file explorer to open the android folder. Click on clrad then haret. If you are using chuckydroid rom, you don't need to manually touch haret. Use ebl boot load program and set auto boot.
Click to expand...
Click to collapse
i'm using this build...nexusHD2 FRG83_V1.5_(froyo2.2.1)
i tried using EBL but says there is no android room on sd card!!
and now i'm trying to go back to wm6.5 and i don't know how to do it?? this chukydroid room is totally out of my knowlege..if you can give me a hand to going back to windows, i much appreciate and i'll invite you a couple of beers lol ...thanks a lot for you time
just boot into your chuckydroid rom, connect via usb, and flash a new rom with the nbh file. its just the same as any windows rom flash.
um. you are unzipping the android folder that you download first right? if your just downloading it and then drag and dropping it to the root of your SD card it isnt going to work. you have to unzip it first. sorry if i'm stating the obvious here...
I'm a pretty experienced computer person. But I am a nube with the Nook Color I received for Christmas. I bought an 8 Gigabyte Cyanogen 7 chip on eBay. Ran the system from the SD chip so I can still go back to my Nook Color Barnes & Nobel system when I want or need to. Booted right up and I was good to go. Happy! Happy!
First what I've got: Cyanogen Mid 7.1.0 Rc1-encore.
Build GRJ22
Kernal 2.6.32.9
Android version is 2.3.4
Got Market up and running, connected on my WiFi network. Enabled Blue Tooth for an external keyboard. Downloaded Null Keyboard. Still monkeying around with that. Decided to try a little overclocking. Downloaded and installed Nook Tweaks. But it says I need to update my operating system. I've tried every step suggested for creating an updated SD chip. (I want to keep the 8 Gig SD chip so I can have that to fall back on if I screw up.) I've searched, read, and experimented. But I don't seem to be able to create my own SD Chip from scratch.
Bought two blank 16 Gigabyte San Disk Class 4 chips. I have a USB based card reader/writer running off a Windows XP laptop. I've got Win32 disk imager on the laptop. I've tried downloading an update to write to the new SD chips. But there are so many variations. It seems everybody and his brother has a variety that is the latest and greatest. I've searched all over the Nook forums for two weeks. Found lots of step by step instructions. The only problem is that many of these are several months old. So some of the systems they mention are now months old.
So, here are my questions:
1. I think what I need to download is CM7 7.2. But there are some later flavors that add numbers after the 2. Can anyone suggest the best CM7 system that will support the features of the Nook Tweaks App?
2. Is there anything I must do to the SD Chip before I use Win32 disk imager to write the system onto my 16 Gig SD chip? Example do I have to format it in the Nook, or does Win 32 disk imager do that when it writes the OS and files to the chip?
3. I'm assuming I'll have to reinstall some of my programs on this updated OS. I'm OK with that. I want something stable. Nightly builds seem like extra confusion. And are there versions by some particular developers that are better than others? Example: one sticky suggested CM7.2 by mrg666.
4. Can someone explain what Mount and Unmount means for my Nook chips? I can remove my SD Chip without Unmounting. But my understanding is that I should select Unmount before I do. Do I have to Mount it again when I place the SD chip for the upgrade? Since this will be an upgrade, I don't see how I can mount it. This is yet another area of my confusion.
I'm not stupid. But I am confused. And the terminology and acronyms so many of the experienced folks use here is confusing - at least to me. Any help will be greatly appreciated.
As long as I'm asking questions. While I was in the native Nook Color OS, it upgraded from version 1.3 to 1.4. Is there some way I can save the native Nook Color Barnes & Nobel Operating System and my books to a spare SD Chip?
Thanks in advance for any help!
Bach On
bachon said:
So, here are my questions:
1. I think what I need to download is CM7 7.2. But there are some later flavors that add numbers after the 2. Can anyone suggest the best CM7 system that will support the features of the Nook Tweaks App?
2. Is there anything I must do to the SD Chip before I use Win32 disk imager to write the system onto my 16 Gig SD chip? Example do I have to format it in the Nook, or does Win 32 disk imager do that when it writes the OS and files to the chip?
3. I'm assuming I'll have to reinstall some of my programs on this updated OS. I'm OK with that. I want something stable. Nightly builds seem like extra confusion. And are there versions by some particular developers that are better than others? Example: one sticky suggested CM7.2 by mrg666.
4. Can someone explain what Mount and Unmount means for my Nook chips? I can remove my SD Chip without Unmounting. But my understanding is that I should select Unmount before I do. Do I have to Mount it again when I place the SD chip for the upgrade? Since this will be an upgrade, I don't see how I can mount it. This is yet another area of my confusion.
I'm not stupid. But I am confused. And the terminology and acronyms so many of the experienced folks use here is confusing - at least to me. Any help will be greatly appreciated.
As long as I'm asking questions. While I was in the native Nook Color OS, it upgraded from version 1.3 to 1.4. Is there some way I can save the native Nook Color Barnes & Nobel Operating System and my books to a spare SD Chip?
Click to expand...
Click to collapse
1) I believe 7.1 RC has an older kernel (maybe even .29, can't remember) that won't allow all the features of the Nook Tweaks. I'd recommend upgrading to full release 7.1 which can be found if you search around.
2) You shouldn't have to do anything, but after you write the image, you may have to expand the partitions to give you full access to the storage space. i.e. writing a 2GB image leaves 14GB unallocated space you will not be able to access until you do.
3) I haven't tried other builds, but reading up on the threads (and usually the first post) can give you an idea of what works, what doesn't, what kind of problems are being run into by users.
4) Mounting/Unmounting is essentially allowing the system to use the drive/card. I think of it as the Windows Safely Remove USB device kind of thing. The system will automatically mount the SD card when you insert it. You can mount cards, partitions, etc. Though I don't think you can unmount a Sd card while running an OS off it.
bachon said:
I'm a pretty experienced computer person. But I am a nube with the Nook Color I received for Christmas. I bought an 8 Gigabyte Cyanogen 7 chip on eBay. Ran the system from the SD chip so I can still go back to my Nook Color Barnes & Nobel system when I want or need to. Booted right up and I was good to go. Happy! Happy!
First what I've got: Cyanogen Mid 7.1.0 Rc1-encore.
Build GRJ22
Kernal 2.6.32.9
Android version is 2.3.4
Got Market up and running, connected on my WiFi network. Enabled Blue Tooth for an external keyboard. Downloaded Null Keyboard. Still monkeying around with that. Decided to try a little overclocking. Downloaded and installed Nook Tweaks. But it says I need to update my operating system. I've tried every step suggested for creating an updated SD chip. (I want to keep the 8 Gig SD chip so I can have that to fall back on if I screw up.) I've searched, read, and experimented. But I don't seem to be able to create my own SD Chip from scratch.
Bought two blank 16 Gigabyte San Disk Class 4 chips. I have a USB based card reader/writer running off a Windows XP laptop. I've got Win32 disk imager on the laptop. I've tried downloading an update to write to the new SD chips. But there are so many variations. It seems everybody and his brother has a variety that is the latest and greatest. I've searched all over the Nook forums for two weeks. Found lots of step by step instructions. The only problem is that many of these are several months old. So some of the systems they mention are now months old.
So, here are my questions:
1. I think what I need to download is CM7 7.2. But there are some later flavors that add numbers after the 2. Can anyone suggest the best CM7 system that will support the features of the Nook Tweaks App?
2. Is there anything I must do to the SD Chip before I use Win32 disk imager to write the system onto my 16 Gig SD chip? Example do I have to format it in the Nook, or does Win 32 disk imager do that when it writes the OS and files to the chip?
3. I'm assuming I'll have to reinstall some of my programs on this updated OS. I'm OK with that. I want something stable. Nightly builds seem like extra confusion. And are there versions by some particular developers that are better than others? Example: one sticky suggested CM7.2 by mrg666.
4. Can someone explain what Mount and Unmount means for my Nook chips? I can remove my SD Chip without Unmounting. But my understanding is that I should select Unmount before I do. Do I have to Mount it again when I place the SD chip for the upgrade? Since this will be an upgrade, I don't see how I can mount it. This is yet another area of my confusion.
I'm not stupid. But I am confused. And the terminology and acronyms so many of the experienced folks use here is confusing - at least to me. Any help will be greatly appreciated.
As long as I'm asking questions. While I was in the native Nook Color OS, it upgraded from version 1.3 to 1.4. Is there some way I can save the native Nook Color Barnes & Nobel Operating System and my books to a spare SD Chip?
Thanks in advance for any help!
Bach On
Click to expand...
Click to collapse
1. Use Win32DiskImager.exe to burn the "generic-sdcard-v1.3.img" onto your "virgin" sdcard.
2. Use Easeus Partition Manager to resize the boot partition on your newly bootable sdcard to 200MB .
3. copy "encore_CM72-Mirage-01262012.zip" to root of sdcard, and rename it to "update_CM72-Mirage-01262012.zip".
4. copy "gapps-gb-20110828-signed.zip" to root of sdcard and rename it to "update-gapps-gb-20110828-signed.zip" .
Put the scard in the Nook and it should boot and fully install the Android system, CM72, Google apps, and then turn itself off. Turn it back on and you should get the Google Android setup screens.
Useful utilities are SDformatter from Sandisk site, Easeus Partition Manager, and Win32Diskimager.exe.
Hope this helps.
Leapinlar just posted an expanded Generic SD Image that does away with manually expanding the boot partition - I believe it's around 200mb... I just tried it and it works great! You can find it here: http://d01.megashares.com/index.php?d01=NcUqquQ
Please take time to thank Leapinlar (and Verygreen) - he worked hard on this!
Downloading it now. Many Thanks to you for the help!
If we're being honest, the only thing you did wrong is spend money on a pre-imaged sdcard. The people pumping those out are profiteers fleecing the underinformed, on the backs of the generous.
Nothing on you, the process can seem daunting, and the ready-to-run sdcards seem like an easier way. It just rankles me that people who had no hand in the work are always the ones selling these. Everything anybody could need is available for free right here.
Progress - but still some questions.
OK. I'm getting closer - thanks to all for their answers. But I want to better understand these steps. Please bear with me. This is the kind of thing that I find confusing. Many of the nubes (like me) can read the step-by-step procedures. But the experienced folks seldom explain WHY and exactly WHAT the purpose of the steps are. And I'm sorry to say that they sometimes leave out crucial details. I'm not just asking for me - but for the many nubes here. (See below.)
So let's take these suggested steps and use them as Question and Answer to help other nubes like me better understand what is being done and why.
Suggested Step 1. Use Win32DiskImager.exe to burn the "generic-sdcard-v1.3.img" onto your "virgin" sdcard.
Please check my understanding of what these steps represent and correct if I am wrong.
Generic-sdcard-v1.3.img is like a template. So this first step creates the four required partitions on my SDcard. My Nook Color is going to require this to be able to install or update the Android operating system. Is that right?
Suggested step 2. Use Easeus Partition Manager to resize the boot partition on your newly bootable sdcard to 200MB.
The Generic -sdcard-v1.3.img template doesn't make the BOOT partition quite large enough for the zipped files I'm going to need to copy to it. (Boot partition is sometimes called the Root.) So step 2 does that. Am I right?
Suggested step 3. copy "encore_CM72-Mirage-01262012.zip" to root of sdcard, and rename it to "update_CM72-Mirage-01262012.zip".
Before I do this: each of these zipped variants is like the equivalent of the Operating System on a computer hard drive. And there are multitudes of these operating systems out there for my Nook Color. Right?
So now I copy the zipped encore file from my hard drive to the Boot/Root partition of the SDcard. A simple copy and paste is fine for doing this. And I should NOT expand the zipped file. Right?
Question for Clarification here: if this zipped encore file was my very first install of a non-Barnes & Nobel Operating system on my Nook Color - is it still necessary to rename it to update, or can I keep the original name of this zipped file?
Since I already installed CM7.1.0 RC1-encore on my Nook Color, this newer zipped file ("encore_CM72-Mirage-01262012.zip") is an upgrade. So I need to rename the first part of that encore file to be update . My Nook Color won't know what to do if I don't do that.
So I now have one file called "update_encore_CM72-Mirage-01262012.zip" into the Boot/Root Partition on the SD card.
Is this correct?
Suggested step 4. copy "gapps-gb-20110828-signed.zip" to root of sdcard and rename it to "update-gapps-gb-20110828-signed.zip" .
I have no clue as to the purpose of this step. This gapps-gb file file has a completely different number than the encore file. Example: the encore file had the number 01262012 - the gapps file you suggested has the number 20110828.
Another person who responded to my original post mentioned a different gapps file that automatically enlarged the Boot/Root partition to 200 Megabytes. It had a different name and number than the one you suggested. It seems logical to me that the gapps zip and the encore zip must work together.
How can I (and others) know which ones are compatible with one another?
I copied "gapps-gb-20110930-237-signed.zip over to the Boot/Root of the SD card. And I renamed it to "update_gapps-gb-20110930-237-signed.zip".
So, at this point there were two zipped files in the Boot/Root Partition of my SD card. They are:
update_encore_CM72-Mirage-01262012.zip
and
update_gapps-gb-29119839-237-signed.zip
Note: because I don't know the relationship between these two archived zipped files - I have no idea if they are compatible.
You also wrote:
Suggested step 5. Put the scard in the Nook and it should boot and fully install the Android system, CM72, Google apps, and then turn itself off. Turn it back on and you should get the Google Android setup screens.
OK. I did this. And my Nook did the update process. I saw maybe 20 or so files that appeared on the screen (for some reason it happens in landscape mode).
My Nook Color then shut itself off.
So far, so good.
So I press the power button and the Nook Color starts up.
BUT now it tries to do the Update process again. It cannot find the zipped files this time since they have already been expanded. So it just shuts the machine down. Restarting several times results in the very same thing.
The Nook Color does not take me into the Android Operating system where I can begin setting up the apps I want.
So - what went wrong?
My guess is that the Encore and the Gapps files I used were incompatible. Are there other issues that could be the cause if this failure?
Please know that if I can solve this (with the help of some of the more patient people in this forum) my hope is to create a post that can be turned into a Sticky for Nubes. I hope you folks won't give up on me. I'm trying not only to do what is needed for me, but also to help other nubes understand the process.
Thanks to all of you!!!
Bach On
I can understand your feelings on this. But the truth is that I did not know how to do it. I agree that the information is here. But frankly, it is not in an easy to understand form. This is a huge website. And there is so much information that it is daunting to find the right steps.
I could probably fix my car when it has a problem. There are lots of resources on the Internet to tell me what to do. But I usually take it to a mechanic who is experienced at doing the needed repairs.
I wanted to know what the Android Operating system was like on my Nook Color. And I paid $18.00 for an 8 Gig Sani SD chip with the operating system. I was impressed enough with this operating system that I now want to know more. And I don't feel fleeced.
Maybe they are making a few bucks on the efforts of others. But they helped ease me into the process much quicker than I could have done it on my own. And now I am wanting to learn to do it myself. I only hope that I can help others as I learn.
Take care!
BO
bachon said:
OK. I'm getting closer - thanks to all for their answers. But I want to better understand these steps. Please bear with me. This is the kind of thing that I find confusing. Many of the nubes (like me) can read the step-by-step procedures. But the experienced folks seldom explain WHY and exactly WHAT the purpose of the steps are. And I'm sorry to say that they sometimes leave out crucial details. I'm not just asking for me - but for the many nubes here. (See below.)
So let's take these suggested steps and use them as Question and Answer to help other nubes like me better understand what is being done and why.
Suggested Step 1. Use Win32DiskImager.exe to burn the "generic-sdcard-v1.3.img" onto your "virgin" sdcard.
Please check my understanding of what these steps represent and correct if I am wrong.
Generic-sdcard-v1.3.img is like a template. So this first step creates the four required partitions on my SDcard. My Nook Color is going to require this to be able to install or update the Android operating system. Is that right?
Suggested step 2. Use Easeus Partition Manager to resize the boot partition on your newly bootable sdcard to 200MB.
The Generic -sdcard-v1.3.img template doesn't make the BOOT partition quite large enough for the zipped files I'm going to need to copy to it. (Boot partition is sometimes called the Root.) So step 2 does that. Am I right?
Suggested step 3. copy "encore_CM72-Mirage-01262012.zip" to root of sdcard, and rename it to "update_CM72-Mirage-01262012.zip".
Before I do this: each of these zipped variants is like the equivalent of the Operating System on a computer hard drive. And there are multitudes of these operating systems out there for my Nook Color. Right?
So now I copy the zipped encore file from my hard drive to the Boot/Root partition of the SDcard. A simple copy and paste is fine for doing this. And I should NOT expand the zipped file. Right?
Question for Clarification here: if this zipped encore file was my very first install of a non-Barnes & Nobel Operating system on my Nook Color - is it still necessary to rename it to update, or can I keep the original name of this zipped file?
Since I already installed CM7.1.0 RC1-encore on my Nook Color, this newer zipped file ("encore_CM72-Mirage-01262012.zip") is an upgrade. So I need to rename the first part of that encore file to be update . My Nook Color won't know what to do if I don't do that.
So I now have one file called "update_encore_CM72-Mirage-01262012.zip" into the Boot/Root Partition on the SD card.
Is this correct?
Suggested step 4. copy "gapps-gb-20110828-signed.zip" to root of sdcard and rename it to "update-gapps-gb-20110828-signed.zip" .
I have no clue as to the purpose of this step. This gapps-gb file file has a completely different number than the encore file. Example: the encore file had the number 01262012 - the gapps file you suggested has the number 20110828.
Another person who responded to my original post mentioned a different gapps file that automatically enlarged the Boot/Root partition to 200 Megabytes. It had a different name and number than the one you suggested. It seems logical to me that the gapps zip and the encore zip must work together.
How can I (and others) know which ones are compatible with one another?
I copied "gapps-gb-20110930-237-signed.zip over to the Boot/Root of the SD card. And I renamed it to "update_gapps-gb-20110930-237-signed.zip".
So, at this point there were two zipped files in the Boot/Root Partition of my SD card. They are:
update_encore_CM72-Mirage-01262012.zip
and
update_gapps-gb-29119839-237-signed.zip
Note: because I don't know the relationship between these two archived zipped files - I have no idea if they are compatible.
You also wrote:
Suggested step 5. Put the scard in the Nook and it should boot and fully install the Android system, CM72, Google apps, and then turn itself off. Turn it back on and you should get the Google Android setup screens.
OK. I did this. And my Nook did the update process. I saw maybe 20 or so files that appeared on the screen (for some reason it happens in landscape mode).
My Nook Color then shut itself off.
So far, so good.
So I press the power button and the Nook Color starts up.
BUT now it tries to do the Update process again. It cannot find the zipped files this time since they have already been expanded. So it just shuts the machine down. Restarting several times results in the very same thing.
The Nook Color does not take me into the Android Operating system where I can begin setting up the apps I want.
So - what went wrong?
My guess is that the Encore and the Gapps files I used were incompatible. Are there other issues that could be the cause if this failure?
Please know that if I can solve this (with the help of some of the more patient people in this forum) my hope is to create a post that can be turned into a Sticky for Nubes. I hope you folks won't give up on me. I'm trying not only to do what is needed for me, but also to help other nubes understand the process.
Thanks to all of you!!!
Bach On
Click to expand...
Click to collapse
You'll need to try again ! A couple observations:
1. Watch the process evolve on the screen of your Nook. You may see a clue as to why your build did not work.
2. use the Google Apps file from my earlier post,"gapps-gb-20110828-signed.zip"
available at the bottom of this page, http://wiki.cyanogenmod.com/index.php?title=Latest_Version .
3. If you don't have an CM ...zip file beginning with "update-" , you will be told , on the screen, that it is missing and must be renamed.
4. Most importantly, watch the screen as the process unfolds. It will be educational and if problems persist, may yield some clues to the problem.
Breaking this down for you and trying to answer/explain your questions:
bachon said:
OK. I'm getting closer - thanks to all for their answers. But I want to better understand these steps. Please bear with me. This is the kind of thing that I find confusing. Many of the nubes (like me) can read the step-by-step procedures. But the experienced folks seldom explain WHY and exactly WHAT the purpose of the steps are. And I'm sorry to say that they sometimes leave out crucial details. I'm not just asking for me - but for the many nubes here. (See below.)
So let's take these suggested steps and use them as Question and Answer to help other nubes like me better understand what is being done and why.
Suggested Step 1. Use Win32DiskImager.exe to burn the "generic-sdcard-v1.3.img" onto your "virgin" sdcard.
Please check my understanding of what these steps represent and correct if I am wrong.
Generic-sdcard-v1.3.img is like a template. So this first step creates the four required partitions on my SDcard. My Nook Color is going to require this to be able to install or update the Android operating system. Is that right?
Click to expand...
Click to collapse
Generic-sdcard.... is a disk image file... it includes the script for partitioning the uSD (if needed), formatting the partitions, installing ROM and gapps.
bachon said:
Suggested step 2. Use Easeus Partition Manager to resize the boot partition on your newly bootable sdcard to 200MB.
The Generic -sdcard-v1.3.img template doesn't make the BOOT partition quite large enough for the zipped files I'm going to need to copy to it. (Boot partition is sometimes called the Root.) So step 2 does that. Am I right?
Click to expand...
Click to collapse
Correct... the sd image will have a single partition (root partition is labeled "boot") that is ~114 MB... ROMs are getting larger... resizing it now will save headache later.
bachon said:
Suggested step 3. copy "encore_CM72-Mirage-01262012.zip" to root of sdcard, and rename it to "update_CM72-Mirage-01262012.zip".
Click to expand...
Click to collapse
This rename is due to the installer/updater script looking for specific naming at the beginning of the filename (update-* or cm_encore_full*)... note the * is an OS wildcard meaning anything. After any ROMs have been installed, the installer/updater looks for a file named gapps-gb-* for processng.
bachon said:
Before I do this: each of these zipped variants is like the equivalent of the Operating System on a computer hard drive. And there are multitudes of these operating systems out there for my Nook Color. Right?
Click to expand...
Click to collapse
There are various ROMs and variations of them, yes. Some name them differently to avoid confusion with standard "official" ROMs. It would be easier for uSD installers if the maintained the "update-" naming convention.
bachon said:
So now I copy the zipped encore file from my hard drive to the Boot/Root partition of the SDcard. A simple copy and paste is fine for doing this. And I should NOT expand the zipped file. Right?
Click to expand...
Click to collapse
Yes... copy/paste... do NOT extract (that's what the installer/updater does)
bachon said:
Question for Clarification here: if this zipped encore file was my very first install of a non-Barnes & Nobel Operating system on my Nook Color - is it still necessary to rename it to update, or can I keep the original name of this zipped file?
Click to expand...
Click to collapse
See the answer above regarding what the installer/updater script expects for the naming.
bachon said:
Since I already installed CM7.1.0 RC1-encore on my Nook Color, this newer zipped file ("encore_CM72-Mirage-01262012.zip") is an upgrade. So I need to rename the first part of that encore file to be update . My Nook Color won't know what to do if I don't do that.
So I now have one file called "update_encore_CM72-Mirage-01262012.zip" into the Boot/Root Partition on the SD card.
Is this correct?
Click to expand...
Click to collapse
See above.
bachon said:
Suggested step 4. copy "gapps-gb-20110828-signed.zip" to root of sdcard and rename it to "update-gapps-gb-20110828-signed.zip" .
Click to expand...
Click to collapse
You do NOT need to rename gapps and it is NOT recommended you do so... the installer/updater will install any and all cm_full_* and update-* files... then process gapps. I personally recommend a 2 step process for this... install the ROM without gapps on the drive... then place gapps on the drive and boot into recovery again for the install of that... has just fixed issues in the past this way.
bachon said:
I have no clue as to the purpose of this step. This gapps-gb file file has a completely different number than the encore file. Example: the encore file had the number 01262012 - the gapps file you suggested has the number 20110828.
Click to expand...
Click to collapse
the number is referencing the date, some are YYYYMMDD some are MMDDYYYY.
bachon said:
Another person who responded to my original post mentioned a different gapps file that automatically enlarged the Boot/Root partition to 200 Megabytes. It had a different name and number than the one you suggested. It seems logical to me that the gapps zip and the encore zip must work together.
Click to expand...
Click to collapse
There is no gapps installer that enlarges the boot partition... they are referencing an updated uSD image file with a larger boot partition due to ICS builds... also note that ICS builds require different gapps than the CM7 variants and become even more confusing... for CM7 stick with the gapps that is on the CM7 wiki pages.
bachon said:
How can I (and others) know which ones are compatible with one another?
Click to expand...
Click to collapse
This gets daunting... answer above.
bachon said:
I copied "gapps-gb-20110930-237-signed.zip over to the Boot/Root of the SD card. And I renamed it to "update_gapps-gb-20110930-237-signed.zip".
So, at this point there were two zipped files in the Boot/Root Partition of my SD card. They are:
update_encore_CM72-Mirage-01262012.zip
and
update_gapps-gb-29119839-237-signed.zip
Note: because I don't know the relationship between these two archived zipped files - I have no idea if they are compatible.
Click to expand...
Click to collapse
See answer above regarding naming conventions and recommendation pertaining one step install (with both files on SD) v. two step (ROM first then gapps seperately)
bachon said:
You also wrote:
Suggested step 5. Put the scard in the Nook and it should boot and fully install the Android system, CM72, Google apps, and then turn itself off. Turn it back on and you should get the Google Android setup screens.
OK. I did this. And my Nook did the update process. I saw maybe 20 or so files that appeared on the screen (for some reason it happens in landscape mode).
My Nook Color then shut itself off.
So far, so good.
So I press the power button and the Nook Color starts up.
BUT now it tries to do the Update process again. It cannot find the zipped files this time since they have already been expanded. So it just shuts the machine down. Restarting several times results in the very same thing.
The Nook Color does not take me into the Android Operating system where I can begin setting up the apps I want.
So - what went wrong?
My guess is that the Encore and the Gapps files I used were incompatible. Are there other issues that could be the cause if this failure?
Click to expand...
Click to collapse
Once the installer/updater installs a zip file... it deletes it... also note... the first boot after an install take a VERY LONG TIME
bachon said:
Please know that if I can solve this (with the help of some of the more patient people in this forum) my hope is to create a post that can be turned into a Sticky for Nubes. I hope you folks won't give up on me. I'm trying not only to do what is needed for me, but also to help other nubes understand the process.
Thanks to all of you!!!
Bach On
Click to expand...
Click to collapse
This would be very good to do... hopefully I have provided enough information to get you started.
Success.
I’m going to post this under my original post so nubes can find it more quickly. Many won’t take time to drill down into the thread. It would still be helpful of some of the experts would address some of the questions asked in this long winded report. [/B]
I discovered some mistakes in my understanding in the Question and Answer part of this LONG post. I’m going to try to correct it.
OK. I'm getting closer - thanks to all for their answers. But I want to better understand these steps. Please bear with me. This is the kind of thing that I find confusing. Many of the nubes (like me) can read the step-by-step procedures. But the experienced folks seldom explain WHY and exactly WHAT the purpose of the steps are. And I'm sorry to say that they sometimes leave out crucial details. I'm not just asking for me - but for the many nubes here. (See below.)
So let's take these suggested steps and use them as Question and Answer to help other nubes like me better understand what is being done and why.
Suggested Step 1. Use Win32DiskImager.exe to burn the "generic-sdcard-v1.3.img" onto your "virgin" sdcard.
Please check my understanding of what these steps represent and correct if I am wrong.
Generic-sdcard-v1.3.img is like a template. So this first step creates the four required partitions on my SDcard. My Nook Color is going to require this to be able to install or update the Android operating system. Is that right?
Self Correction: NO. The Generic–sdcard-v1.3.img only creates the Boot/Root partition and writes the files needed to make the sdcard bootable in the Nook Color.
Suggested step 2. Use Easeus Partition Manager to resize the boot partition on your newly bootable sdcard to 200MB.
The Generic -sdcard-v1.3.img template doesn't make the BOOT partition quite large enough for the zipped files I'm going to need to copy to it. (Boot partition is sometimes called the Root.) So step 2 does that. Am I right?
Suggested step 3. copy "encore_CM72-Mirage-01262012.zip" to root of sdcard, and rename it to "update_CM72-Mirage-01262012.zip".
Self Correction: there is a typo in the previous statement. The encore file should be renamed “update-cm-72-Mirage-0126012.zip”. I had an underscore symbol instead of a dash. I also had “encore” as the word after update. I believe it needs to begin with “update-cm”.
And one more thing. Some operating systems omit the .zip suffix on the filename. The Nook Color seems unable to recognize the archive without .ZIP at the end of the archive name.
Before I do this: each of these zipped variants is like the equivalent of the Operating System on a computer hard drive. And there are multitudes of these operating systems out there for my Nook Color. Right?
So now I copy the zipped encore file from my hard drive to the Boot/Root partition of the SDcard. A simple copy and paste is fine for doing this. And I should NOT expand the zipped file. Right?
Question for Clarification here: if this zipped encore file was my very first install of a non-Barnes & Nobel Operating system on my Nook Color - is it still necessary to rename it to update, or can I keep the original name of this zipped file?
Since I already installed CM7.1.0 RC1-encore on my Nook Color, this newer zipped file ("encore_CM72-Mirage-01262012.zip") is an upgrade. So I need to rename the first part of that encore file to be update . My Nook Color won't know what to do if I don't do that.
So I now have one file called "update_encore_CM72-Mirage-01262012.zip" into the Boot/Root Partition on the SD card.
Is this correct?
Suggested step 4. copy "gapps-gb-20110828-signed.zip" to root of sdcard and rename it to "update-gapps-gb-20110828-signed.zip" .
Self Correction: Still not sure about the compatibility issues. But as with the other Zip archive, the archive name must be renamed to read “update-gapps-bg-20110828-signed zip”. (The quotes and final period are not used in the name.) Again, the .ZIP suffix must be on the end of the archive name.
I have no clue as to the purpose of this step. This gapps-gb file file has a completely different number than the encore file. Example: the encore file had the number 01262012 - the gapps file you suggested has the number 20110828.
Another person who responded to my original post mentioned a different gapps file that automatically enlarged the Boot/Root partition to 200 Megabytes. It had a different name and number than the one you suggested. It seems logical to me that the gapps zip and the encore zip must work together.
How can I (and others) know which ones are compatible with one another?
I copied "gapps-gb-20110930-237-signed.zip over to the Boot/Root of the SD card. And I renamed it to "update_gapps-gb-20110930-237-signed.zip".
So, at this point there were two zipped files in the Boot/Root Partition of my SD card. They are:
update_encore_CM72-Mirage-01262012.zip
and
update_gapps-gb-29119839-237-signed.zip
Note: because I don't know the relationship between these two archived zipped files - I have no idea if they are compatible.
You also wrote:
Suggested step 5. Put the scard in the Nook and it should boot and fully install the Android system, CM72, Google apps, and then turn itself off. Turn it back on and you should get the Google Android setup screens.
OK. I did this. And my Nook did the update process. I saw maybe 20 or so files that appeared on the screen (for some reason it happens in landscape mode).
My Nook Color then shut itself off.
So far, so good.
So I press the power button and the Nook Color starts up.
BUT now it tries to do the Update process again. It cannot find the zipped files this time since they have already been expanded. So it just shuts the machine down. Restarting several times results in the very same thing.
The Nook Color does not take me into the Android Operating system where I can begin setting up the apps I want.
So - what went wrong?
My guess is that the Encore and the Gapps files I used were incompatible. Are there other issues that could be the cause if this failure?
Please know that if I can solve this (with the help of some of the more patient people in this forum) my hope is to create a post that can be turned into a Sticky for Nubes. I hope you folks won't give up on me. I'm trying not only to do what is needed for me, but also to help other nubes understand the process.
Thanks to all of you!!!
Bach On
Final Remarks on the post: after correcting the typos, the update took place and the Nook Color shut itself down.
There were then four Active Partitions on the sdcard. So one or more of the archives created the 3 extra partitions that weren’t there.
The Nook Color then booted up and I was allowed to setup Market, Wifi, etc. I will have to reinstall applications I had working before. No problem there.
BO
You got it - congrats!
If you want to try some of the CM9 nightlies (lots of fun on an extra card) - I've had good success by doing everything together... SP2, CM9 nightly and gapps together in one install and boot... and it does get you to Android Setup right off the bat!
see http://forum.xda-developers.com/showthread.php?t=1444943 for more info. Sam has also included the new expanded Generic SD image there.
Nobody has answered my question about compatibility between the encore zip and the gapps zip. Not sure, yet, which does what and if there are issues that must be understood in choosing these. I did get it done, but I want to be able to explain it to others.
Thanks for all the help, folks!
BO
Sam Adams said:
Leapinlar just posted an expanded Generic SD Image that does away with manually expanding the boot partition - I believe it's around 200mb... I just tried it and it works great! You can find it here: http://d01.megashares.com/index.php?d01=NcUqquQ
Please take time to thank Leapinlar (and Verygreen) - he worked hard on this!
Click to expand...
Click to collapse
I saw that posted in the ICS thread. Does it work for CM 7, as well? I can't see why not, but figured I'd ask. Thanks.
If I remember correctly I used it for making a CM7 card. Works fine because it's just for getting the card ready for whatever you're going to put on it and use.
I'm old though so my memory fails often. :what:
Sent from my NookColor running CM7.2-RC0 MiRaGe - KANG 02012012 using TapaTalk
bachon said:
Nobody has answered my question about compatibility between the encore zip and the gapps zip. Not sure, yet, which does what and if there are issues that must be understood in choosing these. I did get it done, but I want to be able to explain it to others.
Thanks for all the help, folks!
BO
Click to expand...
Click to collapse
You need to read my previous and long post in this thread answering your questions
bachon said:
Nobody has answered my question about compatibility between the encore zip and the gapps zip. Not sure, yet, which does what and if there are issues that must be understood in choosing these. I did get it done, but I want to be able to explain it to others.
Thanks for all the help, folks!
BO
Click to expand...
Click to collapse
There is no direct compatibility issue here other than getting a good base set appropriate for either CM7 or ICS/CM9.
The ROM is the ROM and will run quite happily without gapps. Think of it as your basic Windows OS.
Gapps is a set of Google applications. They are not part of the base OS but are quite important because they give you some basic applications like Calendars and eMail. Most important of all they give a Vending application which allows you to access the Google apps market. Once there you can load and update other apps including the Google apps themselves.
For CM7 you can start with the 20110828 labelled version.
To emphasise the independence of the ROM and the gapps many CM7 install instructions recommended installing the ROM first and getting it going and the wifi set up before even installing gapps.
For ICS/CM9 there are several versions available because they come pre-loaded with tablet/ICS versions of the Google apps which are more appropriate than than the CM7 ones. Quite a few of the alpha CM9 ROM builds point to a good starting gapps. For example, this link is to one of the popular ICS and includes a link to a decent starting gapps.
I did read your very informative post. I've started to prepare an introductory post for possible submission. I'd like to run this by you for your input, if you don't mind.
I'm going to provide you with an e-mail address: [email protected]
If you send a brief e-mail to that address then I send my draft. If you don't want to fool with it, no hard feelings.
Thanks!
BO
No problem at all... just send it to [email protected]
Can't get cm7 to boot from sd card
This is the closest thread I can find to my problem; please excuse me if some of my language is not accurate.
Wrote the generic-sdcard-v1.3ICS-large.img to a 16 gig sd card with win32diskimager.exe. . Copied cm-7.2.0-encore.zip and the gapps zip file to the sd card and renamed the cm file to update-cm-7.20encore.zip. Ejected the sd card, put into my nook. Nook booted from the card and successfully ran through the installation of the android system and gapps and shut down. Cannot successfully boot from the sd disk. It will show the cyanogen flash screen and "loading" and then go to a blank screen. It will sometimes go to the screen with the skateboarding robot with the arrow going around in a circle. I have tried the process many times and get the same result. I was successful once in getting the android system to boot and thought aha, finally there. Computer would not recognise the nook so played with that - and decided I need to reflash the sd card. No success since then - getting very frustrated.
Thanks for any help.
JPB
hallo guys I want to install 2 ROMS in SD card for my HD2 device.
a sense and a MIUI one ,,but I want to have both installed!
in order to run everytime which I want...
is this possible ? can you explain and help?
many thanks!!
Yes, it is.
In the folder with the files in (probably named 'Android') there is a file called startup.txt. Change the folder name to whatever you want (e.g. 'MIUI' or 'Sense') then within the folder open the startup.txt. There will be a line saying rel_path=Android (or whatever the name of the folder originally was). Change this to rel_path=your folder name and boot. I can't remember if the line is exactly like that, so keep the formatting the same (i.e. the same spaces, signs etc.) and only change the Android bit.
thank you! and after I boot into windows how I will choose which I want?
(MIUI or SENSE named?)
gesamgr said:
thank you! and after I boot into windows how I will choose which I want?
(MIUI or SENSE named?)
Click to expand...
Click to collapse
Well I guess you would have to uninstall any automatic loaders you have and manually browse through the files and choose the right CLRCAD and HARET from the desired folder
ok thank you !!!
Hi gesamgr,
follow the download link for the exceller autoloader in this thread:
http://forum.xda-developers.com/showthread.php?t=737001
On bootup sequence it shows you the opportunity to choose which OS you'd like to boot - multiple OS as SD version included! Remember to follow the instructions carefully.
best regards
Getrid
Use MAGLDR 1.13 for booting into WINDOWS or any ANDROID ROM.
Just use Boot AD SD for booting into Android.
Change the folder for booting different android ROMs using SERVICES....Boot Setting.....Android SD Folder.
I have 3 roms in SD
just point the way in Magldr
Hello everybody!!!
I'm a very noob user, so i please a need a step by step help!
I tryed to install a dual boot on my hd2, with android ICS (MIUI) on SD, and windows mobile 6,5 on NAND.
To get that result i used this Guide: http://forum.xda-developers.com/showthread.php?t=1504369
..but, in the the guide is written:
"Instructions:
Well you know just extract everything and put the miuiics folder in your root of sd card, you know the rest.."
maybe a link to the guide is better then "you know the rest..."!
I don't Know the rest, and I proceded in this way:
1) Inistalled the MAGLDR
2) copyed the rom of android on a SD card
3) Configured the setting to make a boot to SD and Android working perfectly!!
Now I even need to use windows mobile 6.5, but I don't know to switch on it!
I think that MAGLDR is overwritten on WM6.5 rom, and now I have a phone with only android, where is impossible to make a dual boot!!!
Anyone can write me the procedure step by step to retry to install correctly the dual boot with WM6,5 and android MIUI ics? Is even good a link with a guide that I didn't found!!!
I have 2,08 HSPL.
Thanks anticipately for your explains!
Nick.sf
nick.sf said:
Hello everybody!!!
I'm a very noob user, so i please a need a step by step help!
I tryed to install a dual boot on my hd2, with android ICS (MIUI) on SD, and windows mobile 6,5 on NAND.
To get that result i used this Guide: http://forum.xda-developers.com/showthread.php?t=1504369
..but, in the the guide is written:
"Instructions:
Well you know just extract everything and put the miuiics folder in your root of sd card, you know the rest.."
maybe a link to the guide is better then "you know the rest..."!
I don't Know the rest, and I proceded in this way:
1) Inistalled the MAGLDR
2) copyed the rom of android on a SD card
3) Configured the setting to make a boot to SD and Android working perfectly!!
Now I even need to use windows mobile 6.5, but I don't know to switch on it!
I think that MAGLDR is overwritten on WM6.5 rom, and now I have a phone with only android, where is impossible to make a dual boot!!!
Anyone can write me the procedure step by step to retry to install correctly the dual boot with WM6,5 and android MIUI ics? Is even good a link with a guide that I didn't found!!!
I have 2,08 HSPL.
Thanks anticipately for your explains!
Nick.sf
Click to expand...
Click to collapse
First link explains how get Android installed and running from SD using CLRCAD.EXE and HaRet.exe = "you know the rest..."
http://forum.xda-developers.com/showthread.php?t=732380
and also a link how to get WM back on the HD2.
http://forum.xda-developers.com/showthread.php?t=609477
BTW: the link you attached is not a guide, it is the ROM itself with few instruction for people who have already some experiences
Cheers.....LinChina
Please do some more reading before flashing anything, if you didn't have an HD2 you would probably end up hard bricking your device if you didn't read. MAGLDR replaces WinMo. You need to boot into the bootloader, flash an official stock ROM via USB then run the SD build via CLRCAD and HARET.
LinChina said:
First link explains how get Android installed and running from SD using CLRCAD.EXE and HaRet.exe = "you know the rest..."
http://forum.xda-developers.com/showthread.php?t=732380
and also a link how to get WM back on the HD2.
http://forum.xda-developers.com/showthread.php?t=609477
BTW: the link you attached is not a guide, it is the ROM itself with few instruction for people who have already some experiences
Cheers.....LinChina
Click to expand...
Click to collapse
thanks a lot!
Later I will tray again! I'll let you know!!!
However in the guide you gave me, do not talk about Android ICS, but the previous version!!! "you know the rest..." continues to be a bit vague!!
Nick.sf
Nigeldg said:
Please do some more reading before flashing anything, if you didn't have an HD2 you would probably end up hard bricking your device if you didn't read. MAGLDR replaces WinMo. You need to boot into the bootloader, flash an official stock ROM via USB then run the SD build via CLRCAD and HARET.
Click to expand...
Click to collapse
Thanks, but i tryed with CLRCAD and HARET without result!!!
Mayby "Android loader V6" isn't the bootloader corretc?
when I select CLRCAD and HARET, the phone lounch first screen of android loading, but then, the phone restarts!!!
nick.sf said:
Thanks, but i tryed with CLRCAD and HARET without result!!!
Mayby "Android loader V6" isn't the bootloader corretc?
when I select CLRCAD and HARET, the phone lounch first screen of android loading, but then, the phone restarts!!!
Click to expand...
Click to collapse
OK you seem to be very confused with your terms, so I'll simplify things for you:
1. Turn the phone off
2. Boot into the bootloader (stripey screen) by holding power and volume down
3. Flash the latest 3.14 stock ROM (WinMo) for your particular device (see on HTC's official website, it has the downloads plus a guide)
4. Place the 'Android' folder on the root of your SD card. Note that the name of this folder may vary from build to build, but it is always the folder containing all of the files.
5. Boot into WinMo then find the file explorer
6. Open the 'Android' folder (or whatever it's called) and find the file 'CLRCAD.exe' and run it. You will not see any visual change
7. Find the file 'HARET.exe' and run it. Android will be booted.
8. After first boot, be patient. Give the device time to settle and then once everything seems fine (after at most 5 minutes) reboot.
9. Once you reboot, you will have WinMo again. Simply repeat steps 6 and 7 to boot into Android.
If this guide isn't simple enough for you, then in all honesty I don't think I can help you much, you'll have to find someone who's more noob-friendly
Nigeldg said:
OK you seem to be very confused with your terms, so I'll simplify things for you:
1. Turn the phone off
2. Boot into the bootloader (stripey screen) by holding power and volume down
3. Flash the latest 3.14 stock ROM (WinMo) for your particular device (see on HTC's official website, it has the downloads plus a guide)
4. Place the 'Android' folder on the root of your SD card. Note that the name of this folder may vary from build to build, but it is always the folder containing all of the files.
5. Boot into WinMo then find the file explorer
6. Open the 'Android' folder (or whatever it's called) and find the file 'CLRCAD.exe' and run it. You will not see any visual change
7. Find the file 'HARET.exe' and run it. Android will be booted.
8. After first boot, be patient. Give the device time to settle and then once everything seems fine (after at most 5 minutes) reboot.
9. Once you reboot, you will have WinMo again. Simply repeat steps 6 and 7 to boot into Android.
If this guide isn't simple enough for you, then in all honesty I don't think I can help you much, you'll have to find someone who's more noob-friendly
Click to expand...
Click to collapse
Thank you so much for the help, but i just tryed this way!!!
In my situation, at point 8 of the guide, my phone restarts after about 30 second (no 5 minute) and then go in loop...
After the restart, the phone enter in WM and ask me to run CLRCAD.exe, and HARET.exe (in this order) and i accept.
The phone starts the loading screen of android, and restarts again.
It always restarts, without going into Android! I have seen at least 10 restarts before try to install Magldr!!!
I don't know the cause, but i think that android ICS is not compatible with the "Android loader V6". I used this loader with android gingerbread without problem!
Now in the link with ROM, i read:
"Ported using Portadroid Ultimate v4.0: http://forum.xda-developers.com/show....php?t=1094372 "
but the page does not exist!!!! What is portadroid ultimate? is it the bootloader?
I'd not worry about the bootloader and other terms much if I were you, it's not important for SD Android anyway
I apologise if I can't be much more use but I haven't used SD Android in a long time . The only thing I can think of is this: EDIT: see bottom of the post first, then try this
1. Find the SD Android build which you have downloaded on your PC
2. Open the folder and find the file 'startup.txt'
3. Find the line 'Rel_path=' and make sure that the next word matches the name of the folder in which the build is stored, for example if I had an SD build with the folder name 'Android', that line in startup.txt should also say 'Rel_path=Android'.
The only other thing I can think of is that somehow the folder isn't in the root of your SD card. Make sure the folder which contains the files (so in the example I gave previously this folder would be called Android) is copied to the root of your SD card. There should be no sub-folders or anything like that, just /Android.
EDIT: I think I may have found it now, try uninstalling the automatic loader app you have (Android Loader V6) and running these files manually rather than doing it automatically. If I'm not mistaken, this app looks for a folder named 'Android' by default, but the name of the folder your ICS build is stored in may be something different.
Just to add that ICS SD builds are often in an 'ICS' folder instead of 'Android'
It shouldn't matter using CLRCAD.exe, and HARET.exe though.
Nigeldg said:
I'd not worry about the bootloader and other terms much if I were you, it's not important for SD Android anyway
I apologise if I can't be much more use but I haven't used SD Android in a long time . The only thing I can think of is this: EDIT: see bottom of the post first, then try this
1. Find the SD Android build which you have downloaded on your PC
2. Open the folder and find the file 'startup.txt'
3. Find the line 'Rel_path=' and make sure that the next word matches the name of the folder in which the build is stored, for example if I had an SD build with the folder name 'Android', that line in startup.txt should also say 'Rel_path=Android'.
The only other thing I can think of is that somehow the folder isn't in the root of your SD card. Make sure the folder which contains the files (so in the example I gave previously this folder would be called Android) is copied to the root of your SD card. There should be no sub-folders or anything like that, just /Android.
EDIT: I think I may have found it now, try uninstalling the automatic loader app you have (Android Loader V6) and running these files manually rather than doing it automatically. If I'm not mistaken, this app looks for a folder named 'Android' by default, but the name of the folder your ICS build is stored in may be something different.
Click to expand...
Click to collapse
aldaweb said:
Just to add that ICS SD builds are often in an 'ICS' folder instead of 'Android'
It shouldn't matter using CLRCAD.exe, and HARET.exe though.
Click to expand...
Click to collapse
That is correct. If I read it right, Android Loader had been set up already for a previous build. When you do this, you tell the app what folder to look for - i.e. "Android". Now that you have a different build, different folder name, the app cannot find all the associated files to boot from SD properly.
Your folder name is miuiics